TESTING SPECIFICATIONS FOR ACCEPTANCE OF (Sanitized)(Sanitized) FILM TRANSPORT MODIFICATION

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04747A002900050021-3
• Release Decision: RIPPUB
• Original Classification: K
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: March 28, 2002
• Sequence Number: 21
• Publication Date: May 4, 1966
• Content Type: REQ

Approved For Release 2002/06/17 : CIA-RDP78B04747A002900050021-3
4 May 1966
STATINTL
1. With the film transport in the "0" position of the "Y" axis,
focus the enlarger with the focusing equipment. Record the STATINTL
numerical setting of focus. Check the focus through the magnification
range.
2. At 7X, make a resolution print on high resolution film with
the high contrast resolution target in the film gate. Without moving
the test target, make two other with the film transport moved to the
extreme positions of its travel.
3. Vary the numerical focus setting
and repeat step # 2.
4. Vary the numerical focus setting
and repeat step # 2.
+2 of the smallest division
1
2
5. Reset the focus adjustment to the reading recorded in step # 1
and repeat step # 2 at 2X and 4X.
6. Repeat step # 2, 3, 4, & 5 using the low contrast resolution
target. After following step j 1 make resolution prints using both
the high and low contrast targets on the newest unmodified
ATINTL
at 2X, 4X, and 7X.
Declass Review by NIMA/DOD
Approved For Release 2002/06/17 : CIA-RDP78B04747A002900050021-3
 ,,7- sr 6,,/
Approved For Rylea"QO?,(
1w I T-
//t I '`/
Approved For Release 2002/06/17 : CIA-RDP78BO4747AO02900050021-3
PJ#l4 7P~p04P0A59q14