SCIENTIFIC ABSTRACT GAZALIYEV, MAKSUT VAGIDOVICH - GAZARYAN A.S.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000514530003-0
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: July 19, 2001
• Sequence Number: 3
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

PHASE I BOOK EXPLOITATION sov/4i8q -
Gazallyev, Makeut Vagidovich, and Antonty Tikhonovich Zasukhin
Effektivnost' spetsializatsli i kooperirovaniya v mashino-
stroyenii (The Effectiveness of Specialization and AffXlia-
tion in Machine Building). Moscow., Gosplanlzdat,, 1960,
207 P. 7,000 copies printed.
Ed.: 1. S. Maksimov; Tech. Ed.: Ye. 3. Gerasimova.
Sponsoring Agency: USSR. Gosudarstvennyy planovyy komitet.
Nauchno-isoledovatellskly ekonomicheskiy institut.
PURPOSE: This book is intended for economists and industrial
planners.
COVERAGE: The book discusses the role of specialization and
affiliation in the organization of industrial production.
It analyzes the basic forms of specialization and affilia-
tion, assesses the efficiency of various stages of speciali-
zation, relates the volume of specialized production and the
G"d-444-

The Effectiveness of Specialization (Cont.) SOV/4189
scope of affiliation, and summarizes basic trends of future
developments of these organizational concepts. The book
contains many tables and statistical curves and diagrams.
No personalities are mentioned. References appear as
footnotes.
TART OF CONTENTS:
Ch. I. Specialization and Affiliation - Progressive
Forms of the Organization of Industrial Production 3
Ch. II. Basic Forms and Characteristics of Specialization
and Affiliation 28
1. Basic forms of specialization and affiliation 28
2. Indicators of the level of specialization and
affiliation 38
3. Indices and procedure for calculating the economic
efficiency; of specialization in production 46
Ch. III. Efficiency of Various Stages of the Specialization
I of Production 55
Card 2/ 4

GAZAL=j Maksut Vaggidovich
FXfektivnost' Spetsializatsii i Kooperirovanlya V
Mashinostroyer-11 (by) M. V. Gazaltyev (1) A. T. ZASUKHIN.
Moskva., Gosplanizdat., 1960,
206 p. Diagrs., graphs,, tables. 23cm-
At head of title: Russia. Nauchno-Issl--dovateliskiy
Ekonomicheskiy Institut Gosplana.
Bibliographical Footnotes.

GAZALIYEV Maksud Vagidovich, kand. ekonom. rictuk; KUT.-TITEOVY P.V.)
red.; P0110YAM11, A.A., tekJ3n. red.
[Specialization and cooperation of industrial enterprises)
Spetsializatsiia i kooperirovanie proryshlemiykh predpri-
iatii. Moskva, Ekonomizdat, 1961. 58 P. (MIRA 15:8)
(Industrial management)

GAZALTYI-719 M.V., kand. ekonom. nai&.
Development of speplalized manufacture of standard arttelso.
Stan,lartizatsiia 28 no.4:66-~', Ap 164. (MIFLA. 17.-b)
1. Ilauchno-issledovateltskly ekonoainheskiy inatitut Gosplana
SSSR.

MIUM B.; CIRILV, V.
Sheep Shearing
Conducting electric shearing of sheep in an
exemplary manner. MTS 12 no. 5, 1952
9. Monthly List of Russian Accessions, Librsxy of Congress, August 19532
- , Uncl.

GAZAIDV, B, Inzh.; HIGDISOV. jL., agronom,
- -
Over-all mechanization help to lower labor expenditures. Ikuka I
pored. op. Y sellkhoz. 8 no-3:35-37 Mr 158. 04IRA 1113)
(Agricultural machinary)

BAYBYA. I.Ye.; SNAIVIMA, Te.V.; rAZAL'YAS, S.I.; KRASKOVA, H.I.; SHAMMINA,
U.N.; SIIM'NIKOV, N.A.
Use of a decoction of Alhagi camelorun for the treatment of
dysentery, Zdraw.Turk- 3 n0-3:46-48 MY-Je '59. (MIRA 12:11)
1. Iz kafedry mikroblologil (zav. - dotment A.I.Iloval'chuk)
Ttwkmenekogo mediteluskogo go"arstvennogo inatituta im. I.Y.
Stallne, i infektatonnoy bollnitsy Leninskogo rayona Ashkhabada
Qlavnn vrach - I.To.Dayeva).
(DTSENMY)
(ALH&GI CANSLORUM-TB121AFAMIC USS)

N
I. A.
Mashini i Oborudovanie Dlya Stroitelstva Mostov (Machinery and Equipment for
Construction of Bridges, Moscow, 1948.

GAMIGRIYATI. V.I. [Ha7anchi-lan, V.I.]) kaqd. ekaia7. navl-; S&MMOV., q.I.
-'H. L I
Improving the planning and aocounting of production costa in
the clothing industry. V.I. 'Hazimabilan, B.I. Semenor. Leh.
prom. no.2.,72-76 4-J916L (MIRA 17:7)

GAZAICHIYAt:, V,',; V.A. (Pono.s-k)
Improv.Ln-7 the plannIng and accGonLing of comrerclal output
and cost of production. ~7)hvein. prom. no.4-.-17-21 31---.',g 165.
( M-_ RA 18 -, 9 )

GAZANCHIYANTS) M.G.; MARTYUSHIN) I.G.
Study of the performance stability of flcpw-through reactors with
a fluidized bed sectioned with grld plates. Khim.i tekh.topl.
i masel 10 ro.1:36-,10 Ja 165. (MIRA 18:4)
1. Moskovskiy institut klilmicheskogo mashinostroyen-iya.

GAZANCIMANTS , M.G. ; I-WITYLISHIN, I.G. ; PLANINSHY, A. N.
Mixing of gas in apparatus with a fluldized beed and Btepped sieve
plates. Khim. i tekh. topl. I masel 10 no.9:38-42 S 165.
(Faw, 18:9)
1. Moskovskiy institut khimLchevkogo mashinostroyenlya.

GAZANCHIYARTS, M.G.j IASTOVTSEV, A.M.; MARTYUSHIN, I.G.; PLANOVSKIY: A.N.;
""' "I(RARAKX, Y.V.; SHNAIDER, Y*~Ye.
Apparatus far the processing of finely dispersed vegetable materials.
Gidroliz. i lesokhim. prom. 18 no.6:5-6 165. (MIRA 18:9)
1. Moskovskiy institut khimichaskogo mashinostroyeniya (for all
except Shnayder). 2, Vaesoyuznyy nauchno-isaledovatellskiy in-
stitut biosinteza belkovykh veshchestv (for Shnayder).

I.F\W
Hazanov, RE. D. On Oe appll tion of a new theory of i
i Ibl-
'171, to the derivation of the
curvaturt fumWa of a _Va,~jf
Ped. Inst. Ut~,. 7-- p. 8 (1 Q SI, 2 1 --24. R

FHW;.z.anov, At. B. Deviation of a yjqtq In parallel
'ffEFXff-AO-ng&-suiEw& Kabardin.G-s.-Nlinst.U~.
Za 12(1957),15-16. (Russian)
ri a vector is moved parallel to itself (in the sense of
Levi Civita) along a closed curve C on a sufficiently small
=n of a surface, then after return to its original
on it is turned over an angle equal to the total:
curvature of the area bounded by C (see e.g. A. Duschek
and W. Mayer, Lehrbuch der Differentialgeometrie, 1,
Teubner, Leipzig-Berlin, 1930, 0. 218].
D. Sbwik (Cambridge, Maw.)

GAZANOV, A.K.
Reports of Narimanov Central Unified Hospital in Kirovabad on
urolithiasis. Azerb. mod. zhur. no.9:51-54 5 161. (MIRA 14-:9)
(CALCULI, UR M RY)

GAZANOVp Sh.M., zasluzhennyy deyatel naukili prof.
Organizing "health zone6%.P parks and
1-
med. zhur. no.7:3-8 JL,6~
~BAKU-;.~FUBLIC
gardens of Baku. Azerb.
15:1)
MALTH)

ALIrE;V, O.B.; GAZANOVp T.A.
Presence Of COniacian glediments in the upper Akhymdzhachay Valley
(Kedabek District)& Dokl, AN Aserba SER 21 no.7235-38 165.
(MIRA 18t12)
1e 7rnstitut 90010911 AN AzSSfto Submitted February 19, 1964o

GAZANOV, T.G.; NAD'-,*I[A.--OVA, F.K.
Role of adenoviruses in the pathogenesis of acute diseases of the
upper respiratorv trant. Axerl;-. med. zhur. no.10:62-66 0 162.
(MIRA 17:10)

GAUPI, Tlaclimir,, inzo (Zagreb,, Vrbanice" 20a)
Basit switches of electronic calculating machines. Tehnika
Jug:Suppl,L:FIlektrotehnik& 13 no.1:125-127 Ja. 163.
1, Tvornica "Sljememo Zagreb-Seavate.

GAZAPI, Vladimir, ins. (Zagreb, V26niceva 20a)
YAtbematical and alectrotecbnical bases of electric calculating
machines. Tekhnika Jug 17 no.12:2330-2335 D 162.
1. Tvornica "Sljeme",' Zagreb-Sesvete.

GAZAPIP Vladimir, inz. (Zagreb, Vrbanicova 20-a)
Laplace trans f ormation applied in CoOlptILIng au'.,vuk.lo control
processas. Tolmicka Jug 18 no.11%SuppliElektrotehnika 12 no.11i
2089-2093 11 163.
1. Wornica "Sljeme"s, Zagreb-Sesvate.

PONTUCH, F.;,GAZAJR9p-F,; DRACp P.; POKORNY, J.; UHER, M.; RRADECKY, L.;
KOHOUTEK, M.; ZIDEK, J.; CECH, E.; CERVENKA, J.; NEMEC;
NOVAKOVA, J.
Perinatal mortality in premature labor. Cask. gynek. 29
no.6:459-466 Ag 164.
1. 1. gyn.-por. klin. Lek. fak. University Komenskeho v
Bratislave (prednosta prof. dr. S. Stefanik); Gyn.-por.
klin. Lek. fak. Palackeho Univerbity v Olomouci (prednosta
doe dr. F. Gazarek, We.); Gyn.-por. odd. Mestskeho ustavu
narodniho zdravi v Bme (veduci MUDr. Nemec); I. gyn.-por.
klin. Lek. Fak. University J.E. Purkyne v Brne (prednosta
prof. dr. L. Havlasek (deceased)); II. gyn.-por. klin. Lek.
fak. University J.E. Purkyne v Brne (prednosta doe. dr. M. Uher,
CSc.); Gyn.-por. klin. Lek. fak. Karlovy University v Plzni
(prednosta prof. dr. V. Mikolas); I. gyn.-por. klin. Fak. vseob.
lek. Karlovy University v Prahe (prednosta prof. dr. K. Klaus,
DrSc.); Gyn.-por. klin. Lek. fak. University P.J. Safarika I
Kosiciach (prednosta doe. dr. K. Poradovsky, CSc.).

GAZAR3K. F. (gyn. por. odd. OWIZ Sump- erk)
Possibilities of further decrease of infant mortality in the field.
Cas. gyn. 23[371 no.4:245-247 june 58.
1. Gyn. por. odd. OUNZ v Suzperku. primar MUDr. F. Gazarek.
(INFIdIT MORTALITY, prevention and control,
NO

GIZARRE, Frantisek; KRIKAL, Zdenek
Indications for active management of 3d stage of labor supported b7
vnsoplncentDgraphy. Cesk. toln. 23[373 no.6:442-4h6 Aug 58.
1. Por. an. oddel. OWS Sumerk. prednosta nrim. Mr. .-Frantisek
Ganprek. F. G., S=,)erk, Nemocnicni u1.
(PLkCMM. blood supply
vasoplReentography, value in indicating management of
3d stage of labor (Cz))
(WOR
3d stage, management, value of vasonlacentography (Gz))

GAZAR Frantisek
Antenatal, care and ovarian tumors in pregnancy. Cask. gyn. 241381
no.6:468-472 July 1959
1. For.-jgu. odk OMM Swaperk, prednosta prim. 'MLTDr. Frantisek Gazivek.
(OVART, neoplasms)
(PRBGMGY. compl)
I

,_4Z&M, Frantisek
Cystic kidney degeneration as a recurrent cause of labor complication.
Cesk. gyn. 251391 no.1/2:149-151 Mr 160.
1. Por.-gyn. oddeleni OUNZ v Sumperku, prednosta prim. KUDr. Fr.
Gazarek.
(DISTOCIA etiol.
(KIIny DISIIASB)
(FIM dia.)

GAZARM, Frantisek; IRTIAL, Zdenek
Role of education in the prevention of late gestosis. Cesk.g7n.
25139] no-3:202-205 1960.
1. Gyn. por. odd. OUNZ. Samperk, prednoota Yrnntisek Gazarek.
(PRIGRAICT TCXRMIAS prev. & control)

GAZAREK, F.; KRIDL, Z.; VTTASEK. R.
Observations on the differential diagnosis between acute necrosis
of the-oancreas and thrombosis of the mesenteric vessels in
pregnancy and lab6r. Cask.gYn-251391 no.8:626-638 0160.
1. Gyn.por.odd. OUNZ, Sumperk, prednosta dr. Frantisek Gazarek.
(PANCRIAS diseases)
(NESBYRRIC TESSALS din)
(PREGRAlff compl)
(THROMBOSIS In pregn)

.-GAZAREK, F.I LUSKACY I.; HAJDUK, Fr.
- --- -,-P
Measures for the control of sonosomial infections in obstetrics.
Cook. gyn. 26[401 no.4:305-311 161.
1. Gyn. por. odd. OUNZ Sumpork, prods Mr. F~r. Gazarek, saalemily
lokar CSSR.
(EIOSPITAIZ) (STAPKMOCOCCAL INMTIONS prov & control)
(OBSTEMCS)

GAZAREK,, Frantiesk
Abdominal colpopwW. Cook. gynek. 26.no.9:696-697 N 161.
1. Gyn. por. odd. OUNZ v Stoperku, prednosta prim. MUDr. Fr. Gazarek,
saslouzily lekar CSSR.
(VAGINA wwg)

SU1'--1*:A:-'Z', ~Uvcn Nlanes
COIL-Itr-
y: Czechoslovakia
Academic Degrees:
Affiliation.,
Source: Prague, Praktic& Lekarp Vol 41, No 11, 1961, pp 4019-505.
Data: "Prevention in the Staphylococcal Infections in Maternity and Infant
t t it
~ Mary 84",
P
,rantisek, MD,, Director of the Obstetrical and Gynecologic
Author GAZAREK, F
Department OUNZ /Okresni ustav narodniho zdravi; Okres
Institute of Public Health/ (Porodnicko-gynekologicke
oddeleni OUNZ), Sumperk.
Luskae, Emilp MD, /presumably/ Epidemiological Department of the
Ministry of nealth (Oddeleni epidemiologie Ministerstva,
zdravotnictvi), Prague.
HAJDUK, Frantisek, DM, /presumably/ Epidemilogical Department of
the Ministry of healthl Prague.
SMEXAL, M., RNDr, MMS /Yrajska hygienicko-epidemiologicka stani-
ce; Kraj Public health and Epidemiology Station/, Olomouc
VAREXA, RNDR, OHES /Okresni hygienicko-epidemiologicka stanice;
Okres Public "ealth and Epidemiology Station/000 9516,,)
Sulfiperk.

GAZAREKi. Frantisek; KRIKALY Zdenek,- STOLCOVA, E,,Iiska
Role of the midwife in the preparation of expectant mother for
labor. Cesk. gyn. 27[41) n0.5:363-366 Je 162.
1. Por.-gyn. odd. OUITZ Sumperk, prednosta dr. Fr.Gazarek.
(L&BOR) (MIDWIVES)

KRIKAL, Zderiek; -GAZAREK, F.
Medical management of the onset of labor with prevention of pain and
complications. Cesk. gyn. 27[411 n0-5:405-409 Je 162.
1. Gyn. por. odd. OUNZ Sumpork, dnosta dr. F. Gazarek.
(D,L,V,,,,yre

GA=K F
~19 ~
Heart diseases and maternal mortplity. Cask. gyn. 28 no..1/2:57-,62 F
143.
1. Gyn.-por. klinika lek. fak. PU v Olomouci, prednosta doe. dr.
F. Gazar'ek, CSc.
(HEART DISYMES) (PREGNANGY COHPLICATIONS~.
(MATERNAL MORTALITY)

GAZAREK, F.
Intrauterine fetal death in kidney diseases. Cesk.gynek. 28 no.8:
566-571 0 163.
1. Gyn. por. klin. lek. fak. PU v Olomouci, prednosta doe. dr. F.
Gazarek" OSC.
q-

GAZAREK,F.; KRIKAL,Z.
-~, -. ~- - ~ ~ .., 7
Postgraduate training for field workers in the program of a
unified hospital located in territory belonging to a clinic.
Cesk. gynek. 29 no.ltl36-139 F'64-
1. Gyn.-por. klinslek.fak. PU v Olomouci; prednosta: doc.dre
F.Gazarek., Me.

HECZKO,P.; LDIDNER,E.; GAZAREK,F.; SCMAR,J.
Effect of kenital inflamations on the uropoietic system in
vomen. Cook. gynek. 29 no.31239--241 Ap'64
1. Gyn.-por. klin.lek.fak. FU v Momouci (prednosta: doc.dr.
F. Gazarek,,Mc.) a Chirurg. klin. lek. fak. PU v Clomouci,
(prednosta: prof. dr. V3.*Rapantp Drsc.).
-X-l

SNAID,V.; 3JDINSKA, E.; GWOCH, A.; FINXOVA91.; GAZARMj F.; POKORNTOJ.;
RAFFAJ.OK.
Diagnosis and surgical treatment of insufficiency of the cervix
uteri in pregnancy. Cesk. gynek. 29 no*4:254-258 My'64

STEMBE~A, Z.K.; KOTOEK, A.; TRNKA, V.; GAZARLK, F.; FOKOIIW,, J.- KOLFTA, F.
Asphyxia and perinatal mortality (intsiatal and intranatal).
Cesk. gynek. 29 no.6-.485-492 Ag 164.

JURKOVIC, Ivan, prof.,dr.ing.; GAZAREK, Mato, ing.rud.
The Brezicane flint sand as raw material for the producticn of porous
concrete. Kem ind 9 ln~.9:W-31-N-36 S 160.

ti -- -.I Ni
1. HAZAR-&V5ia-Y-,-S,.
Z.. USSR (600)
4. Floriculture
7. Becording data on the study and appraisal of ornamental flowering plants. Biul. Glav.
bot. sada no. 12 1952
9. Monthly jUst gL Bassian Aggessions. Library of Congress. YArch 1953. Unclassified.

NR, AP6001693 (A0 SOURCE CODE: UR/0089/65/019/005/0437/0441
AUTHOR: Hhripin, f.A.; G~ ~arlwl~dy, Yu ~.V. -, Zadneprovskiy, G. K; Luklyanova, L, A.
ORG: none
TITLE: The binary UF4-UC14 system
SOURCE: Atomnaya energ a, v., 19 , no. 5, 1965, 437-441
TOPIC TAGS: uranium compound, halide, x ray analysis, thermal analysis,
ABSTRACT: Mixed uranittm halogenides are, evidently, the least known of the halide com-
pounds of the fourvalent uranium. The authors Investigated the binary UF4-UC14 system by
differential thermal analysis and x-ray methods and established Its phase dLVram. The
system contains three uranium compounds: UC12F,-, UCIF3, and (not previously reported)
UC13F. All three compounds melt in an incongruent manner at 460t3, 5306, and 444;L2C,
respectively. No solid solutions have been found. Ile authors determined in general the
optimum conditions for the production of pure systems of the compounds from binary
UC14-UIF4 melts. On the basis of the phase diagram obtained, explanations are given for the
apparently contradictory results obtained by other authors in studies of the methods for the
synthesis of UC12F2 and UCIF3. Orig. art. has: 6 formulas and 2 figures.
SUB CODE: 07/ SUBM DATE: 02Dec64/ ORIG REF: 002/ OTH REM 005
UDC: 546.791.4

har-d.med.naul~; PCTULOVA,
Y~~.X.; SIM11ROVA, N.N.; r-,),RBtJJ,-Z7A, Z.V.; R.N.
Characterlstica of the C111-11C&I WIFCIUS '-' the c.-curaic of Bornholm
dineaso caused by Coxsackie virus B3. Sov.med. 28 tic-4152-56 Ap
165. (MIRA 18:6)
1. Institut kil-krnetiM AN RrSSR (dir. - doyntvitelln.,rj chlen
AN IT!,rainskoy SSR V.M.Crluohkov) 111irainskly nuu,-,hno-i.,;sledovatel'-
sl.-iy institut kormunellnoy gJL-ivetiy (dir. - prof. D.N.Kalyltzhnyy)
I Luganskaya oblastnaya sai-iltarno--apiietdt-;Iogi:!Iieske-vii Ltantsiya
(glavnyy ltrach - N.N.Slichi-rova).

GAZARKH, Z. S. (Senior Scientific Collaborator), and- SILGOV, V. A. (Junior Scientific
Collaborator, VIEV).
"Complement fixati6a reaction used in the diagnosis of paratuberculosis."
Veterinariya, Vol- 38, No. 2, 1961, P- 25.
-~ -%--- ., ~- .
, --- I---..- I - ~ I., ~, 11

GAZARKH Z S. and SHCHUREVSKEY, V. E. (Senior Scientific Co-Worker, All-Union
natitute of Experimental Veterinary Medicine)
"Diagnostic effect of allergy in paratuberculosis of goats"
Veterinariya, Vol. 39, no. 6, June 1962 PP. 39

SUM., V.A.,, kandvoternauk; 44A~ ZOS. -
I
Diagmis of peratubarculosis in isheop and, goats. TmWy VW
26t233-138,162, - (MIRA 16#2)
1, laboratoriya po ixuahmiyu tuborkuleza. i paratuberkulan
reed0yumor instituta okeparimmtalluoy veterinarii.
-(fobbol's disease)

GAZARKH, Z.S., starshly nauchnyy sotrudnik; SHCHUREVSKIY, V. Ye.: sta=-
-- ~'Slif -a'U--'Cbnyy sotrudnik
Diagnostic importance of allerg7-in W'obne2s diseaaa or goats.
Vaterinariia 39 no.609-41 Je 162, (MIRA 18:1)
1. Tsesoyuzny7 inatitut eksperlmentaltnoy veUrinarii.

GAZARKII, Z.S., starsh-Jv nauchnyf sotrudnik; SHAROVY V.A., m1adshiy naucbnyy
.- - I I.. sotrudnik
Complement fixation reaction in the diagnosis of paratuberculosis.
Veterianrlia 38 no.2;25-28 F 161. (MIRA 18:1)
1. Vsesoyuznyy institut eksperimentallnoy veterinarii.

V. i . ? dot-=~etit) ", ;-.' . I ',ik . , IIIIJ'131i-,~.H)l V.;., v,~-v:, ir). riauk
In memory of Actidemi-cian Sargel Nikolaovich Vyshelesskii,
1874-1958. Veter.1narila 41. no.1021-125 A 165.
(MIRA 18--, 2)

6;r, 40~
:'/fi&zLr-hfju-A, On a new Integral, algebraic In the velab-d--
dis, of the generalized three-hadl problem. Ukri-n.
Mat. Z. 8 (1956), 5-11. tRtissmn)
The author consid
iders the motion of three- particles with
equal masses, interacting with forces of modulus
jArjj+Brjj3l (i. j= 1. 2, 3; i
where ru denotes the distance between the masses in, and
M11 and A, B are constants. The existence of a new
algebraic integral, independent of the ten classical
inte shown. The integr-.1 found by Yu. D. Sokolov
C. ErIvIlk-1.) Acad. Sc-.. URSS (N.S.) 46 (1945), 95-98;
~
IR 7, 224) and that obta;ned by E. EgmAry [ibid. 55
(1947). 793-795; MR 9, 511] are special cases of this
integral. By means of this new integral the order of the
stem of differential equations of motion is reduced to
SY
four. E. Leirnatsis (Vancouver, B.C.).

j
1-41
On a case oililane motion at three material
6whi
A
L
.
.
,
-
~ Uk
i
i
M
t
2
8
956 i
208
213
R
.
nts.
ra
n.
a
.
.
(1
)
q -
uss
an)
. (
,
e author considers one speci I case of the plane
a
motion of three material points (Pj) under the action of
the forces jFjjj=mjmjjj(rjj% i, j==0. 1. 2, where
1(rW:= Mil is the function of the distance of two if

oints, with the condition that thc ratio r/p=lconst: ? j-
p
the
distance Wtween two points and p the distance of the
3rd point frorn the cent're of inertia of two preceding
points. Using the moment of inertia of a systerit -is in-
dependent, variable, and pro iting by the integrals of
energy (h=const) and bf-angular mornentuin (C=const),
the problern is reduced to t6 integration of a system of
four differential equation~-of the Ist order and to two
quadratures. It is shown- that if -there exists a class of

furicti
onsofth~Lorm/(r)-Y,- C,,r-.tlicnthcsohfflonof
'
3
. III
the differential.
equations has the -form 1(r)="1r+Br
-the case, BOO the motion is possble if c=0 and nij=m.
'
rade).
then
r/p=2,1 1/3 D. Rafkovi4 (Beh,

6-1'Zx)'er'k' /),;-,
SARKISYAN, m.M.; AVAMSYAN, T.G.; MELKONYAN, V.A.; GAZAROV, A.T.
Preparation of slag for casting into stones, Patent U.S.S.R. 77.344, Dec.
31, 1949.
(CA 47 no.19:10196 153)

GAZAROV, A.T.
Some problems on the synthesis of hinged four member mechanismse
Izv. AN Arm. SSR. Sor. MT nauk 8 no.85-99 Kr-Ap '55. (MLRA 8:?)
1. Yerevanaki3r politekhnichookly institut imeni K. Rarsa.
(Mechanics)

GAZAROV, A.T., Imndidat takhnichaskikh nauk.
Designing embossing press mechanisms. Vast. mash. 36 no.8:
50-55 156. (MLRA 9110)
(Power presses)

122-3-2/30
AUTHOR: Gazarov, A. T. , Candidate of Technical Sciences, Dotsent.
TITLE: On Design Standards of Crank Mechanisms (0 normakh proyek-
tirovaniya krivoshipno-shatunnykh mekhanizmov)
]PERIODICAL: VestnikNashinostroyeniya, 1957, vo.3, pp. 12-16 (USSR)
ABSTRACT: The crank mechanism generally used in machine tools with
its cross-slide a3cis either intersecting the crankshaft axis or
eccentric are examined. The variety of conditions in different
machine tools is classified and their effect on the desirable
ratio of the forward and return stroke is discussed. The maxi-
mum number of strokes and the minimum crankshaft torque for.a
given cross-slide force over the working portion of-the cross-
slide stroke are the main design criteria. This torque-to-
pressure ratio is determined by the angle between the connecting
rod and the cross-slide axis whose values in the effective range
are plotted for different forward-to-return stroke ratios and
different crank ratios. The importance of determining the
effective limit of the working stroke is emphasised. Certain,
supposedopractical limitations to keep the connecting rod angle
above 45 are proved to be unfounded and for a friction coeff-
icient of 0.08 no wedg;ng-in of the cross-slide can be expected
down to an angle of 10 , which can, therefore, be tolerated
Cardl/2 during the idling portions of the strokes.

On Design Standards of Crank Mechanisms. 122-3-2/30
There are 10 figures, including 7 graphs and 3 Slayic
references.
AVAILABLE: Library of Congress.
Card 2/2

25(2) PHASE I BOOK EXPLOITATION SOV/2564
Akademiya nauk SSSR. Institut mashinovedeniya. Seminar po
teorii mashin i mekhanizmov
Trudy, tom 18, vyp. 69 (Transactions of the Institute of Mechanical
Engineering, Academy of Sciences, USSR. Seminar on the Theory
of Machinery and Mechanisms, Vol 18, No. 69) Moscow, I::d-vo
AN sssR, 1958. 69 p. Errata slip inserted. 2.9500 copies
printed.
Ed. of Publishing House: V.R. Beylin; Tech. Ed.: N F. Yegorova;
Editorial Board: I.I. Artobolevskiy, Academician ~Resp,- Ed.);
G.G. Baranov, Doctor of Technical Sciences, Professor;
V.A. Gavrilenko, Doctor of Technical Sciences, Professor;
V.A. Zinov'yev, Doctor of Technical Sciences, Professor~;
A.G. Kobrinskiy, Doctor of Ibchnical Sciences; N.I. Levitskiy,
Doctor of Technical Sciences, P~ofessor; N. P. RayevskJ.y,
Candidate of Technical Sciences; L.N. Reshetov, Doctor of
Technical Sciences, Professor; and M.A. Skuridin, Doctor of
Technical Sciences, Professor.
Card 1/4

Transactions of the Institute (Cont.) S G V/ ~r 4 - 4
PURPOSE: This book is intended for engineers Interested in
the theory of machinery and mechanisms.
COVERAGE: This collection of scientific papers deals with
the synthesis and analysis of types of linkage.3an Investigation
of vibratory mechanisms, and methods of calculating the
nonuntormity of tape movement In tape-feeding mechanisms
of memory units. References follow several of the articles.
TABLE OF CONTENTS:
Preface
3
Artobolevskiy, I.I. (Academician). A Note on Some New
Mechanisms 5
The author discusses the theory of a new universal
"konikograf" (a device for drawing a -onic sections),
the application of the inversion principle in the
construction of a straight-11ne mechanism, and the
theory of exact-translation mechanisms.
Card 2/4

Transactloni of the In3tlDute (Cont.) S OV/2f')WA I
Gazarov. A.T. (Candidate of Technical Sciences]. Problem
o? 5_y-n-n~esizlng Four-bar Linkages With Maximum Angles of
Transmission 13
The author discusses-the problem of designing a four-
bar linkage with a given velocity ratio and a maximum
angle of transmission.
Levitskly, N.I. (Doctor of Technical Sciences]. Synthesis of
Link Mechanisms 18
The author presents a nimplified and accurate method
of synthesizing types of link&ges.
Bessonov, A.P. (Candidate of Tpchoical Sciences]. In-
vestigating the Motion of a Vibratory Mechanism With a Weak
Spring as a System With Two Degrees of Freedom 34
The author investigates the motion of a vibratory
mechanism with a small restoring force.
Card 3/4

Transactions of the Institute (Cont.)
Pusset, L.A. (Candidate of Technical
Calculating the''No'nuniformity of Tape
feeding Mechanisms '
AVAILABIZ: Library of Congress
Card 4/4
SOV/2564
Sciences). Methods of
Movement in Tape-
52
GO/mg
12-7-59

25(2) PHASE I BOOK EXPLOITATION SOV/1812
Gazarov, Artem Tigranovich
Sharnirno-rychazhnyye mekhanizmy kuznechno-prnwvykh mashin (Link
Mechanisms of Forging Presses and Machines) Moscowi. 14ashgiz., 1958.
107 P. Errata slip inserted. 4,000 copies printed.
Ed.: M.V. Storozhev; Ed. of Publishing House: V.A. Mezhova;
Tech. Ed.: G.V. SmIrnova; Managing Ed. for Literature on Heavy
Machine Building: S.Ya. Golovin, Engineer.
PURPOSE: The book is intended for engineers, designers, and
students of vtuzes.
COVERAGE: The book presents analytical methods for the'synthesis of
toggle mechanisms of press forming machines. These methods can
be used in other branches of machine design where analogical
mechanisms are widely usedeither in the design of new machines
or in modernizing existing ones. The author states that during
the last five year plan the production of forging equipment
increased eight times, and during the present five year plan It
Card 1/5

Link Mechanisms of Forging Presses (Cont.) SOV/1812
increased four times. These facts show that metal forming
will take the leading role in metalworking in the USSR. The
intention of the author is to eliminate nonrational, random
designs of press mechanisms and to provide guidance for design
of optimum schemes of these mechanisms, enabling the building
of economical presses of high productivity and minimum weight.
No personalities are mentioned. There are 9 references, all
Soviet.
TABLE OF CONTENTS:
Introduction
3
Ch. I. Basic Correlations
Types of mechanisms with lower pairs most used in forging
and stamping machines 5
Centric and out of center mechanisms 7
Effect of. transmission angle I V I on the magnitude of torque 12
Effect of transmission angle on efficiency of the machine 17
Effect of coefficient K [ratio between time of working and
idle stroke] on magnitude of torques and on productivity.
of the machine 21
Card 2/5

GAURov, A.T.,
.GenerallsatIon of Professor Paranov's problem. Isy. AN AruM Ser.
tekh, muk 11 no.U61-464 158. (MIRL 1124)
1, Teremsidy politekbidaheekly Institut Ims K, Mrim,
(Noobanloso Analytic)

GAZMVp A.T.., kand.tekhn.nauk
Conditions for the action of a crank. Sbor. nauch. trud.ErPI:
no. 20:137-146 159. (MMA 14:5)
(Cranks and crankshafts)

GAZAROV A T-,, kand.tekhn.nauk
Effect of the position of a crank center on the element of a
four-bar link-go. Sbor. nauch. trud-ErPI no. 20:147-160
159, CMIRA 14:5)
(Link and link motion)

S/1 45/60/000/006/011/01 5/XX
D221/D304
AUTHOR: Gazarovp A.T.9 Candidate of Technical Sciences, Docent
TITLE: Choice of a rational scheme for crank mechanisms
PERIODICAL: Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroye-
niye, no. 6, 1960? 76 - 80
TEXT: The author compares concentric and eccentric cr=k mechani-
sms. It was found that in cases where no full working stroke is
used, or where the return stroke is not used the eccentric mechani-
sm can transmit more torque? and loads the crankshaft to a lesser
degree than the concentric mechanism, under simiiar conditions. In
a concentric mechanism (sirce the line of the piston is an axis of
syi,imetry) the angles at which the forces are transmitted are symme-
irical for both working and return stroxes. In an eccentric mecha-
nism, nowever, the angles are larger during the working part and
sharper during the return stroxeo In a concentric mechanism the
working angle of-the crank can reach 900 in the extreme; an equa-
tion is given for the minimum angle and for the force-transmitting
angle of an eccentric mechanism. A formula for T is derived.19
Card 1/2 max

S/145/60/'OOO/OO6//U11/O15/XX
Choice of a rational scheme for ... D221/D304
will decrease to '911 at the end of the working stroke. On the return
0
stroKe'T changes from 71 toT and then increases to ~P again.
0 Win 0
Comparing the values one can see that during the working stroke the
angles between crank and connecting rod are larger lor the eccen-
tric mechanista, and during the re6urn stroke, for the concentric
mechanism. The use of eccentric mechanism is particularly advanta-
geous when I = 0.1 - 0,3- In a diagram the angle Iff is plotted agai-
nst % of stroke and it can be seen that the full line representing
the eccentric mechanism with E = lis mostly above the one showing
the change ofV in a concentric mechanism. The value of I was 0.3.
It is concluded that eccentric mechanisms are particularly advan-
Zageous when I is relatively large and the whole working stroke is
not utilized. It is mentioned that even when eccentric mechanisms
are used in practicep they are not always rationally designed; an
exaziple is discussed. There are 2 figures and 2 Soviet-bloo re-
.Lerences.
ASSOCIATION: Yerevanskiy politechnicheskiy institut (Yerevan Poly-
technic Institute)
SUBMITTED: December 24, 1957
Card 2/2

30251
S/145/60/000/009/'002/017
Ll -LI NO D221/D304
AUTHOR; Gazarov, A T Candidate of Technicdl Sciences, Docent
TITLE: Synthesizing cam mechanisms with an optimum angle of
pressure
PERIODICAL: Izvestiya vysshikh uchebnykh zavedeniy. Mashino-
stroy(kiiye, no. 9, 1960, 24 - 28
TB-,(T: The problem consists in making the deviation of ctg from
ctg as small as possible (V is the optimum angle of pressure).
0
On the basis of geometrical and kinematic relationships !.t is al-
ways possible to form ctg f (cf),where T is the variable angle
that determines. the position of the cam. With the above function
it is easy to solve the problem of assessing the deviations of the
function from a specified value ctg Vo = m using, for example, the
criterion of mean quadratic deviations. The choice of the optimum
angle of pressure is predetermined by the desired limiting factors.
In the case of minimum wear of cam, pressure should be reduced, and
Card 1/3

30251
iS/145/60/000/009/002/017
Synthesizing cam mechanisms with ... D221/D304
therefore, the right angle will be optimum. The author demonstrates
this method in the case of a plate CL.m and an oscillating: follower.
Ail assum tion is inade that the follower has a motion defined by a
a + F(-j-~, where a is the angle which determines the position of
0
in its lower position. A set of
the rocker at any point, and a 0
equations is deduced which leads -to
I + F, ((?) Cos adp + ml + FI(y) da (9)
S
sW a Mn !x
+ F1 (y)II dp
sIn2 Ct
The latter is simDlified when minimum wear at constant speed of
follower is required. Then the above-coefficient is redui,-ed to
Cos a(,+"
2)
Cos a,,
Card 2/3 2

S/14 5/607/ 000/009/ 002/017
Synthesizing cam mechanisms with D22!/D304
In addition, another equation is obtainedo by suQecting the mecba-
nism to the condition of the pressure angle that ensures an assumed
value of arc ctg n~ The author cites the mathematical analysis for
the above. There is 1 figure,
ASSOCIATION; Vladimirskiy filial moskovskogo vechernego niaeblno-
stroitellnogo instituta (VladimJr Branch of the Moacow
Evening Engineering Institute)
SUBMITTED: October 23, 1958
Card 3/3

GAZAROV. G.
......
Operational *xpmri*nc* of the OParithakais kommuna* Plont. Nor.
flot 18 no. 6:11-12 Js 158. (MINA 1117)
1. Starshiy Inshoutr alanovo-oroizvodetvignoego otdel& zavoas imeni
Parishokoy Iromemny. (Shipyards)

6;97-Aeov, 63~,L'-~,
KORNITENIO, T.S.; GAZAROV, G.S.
e-
Clamp device for lifting storage tanks under roller machine construction
into vertical position. Rats.i isobr.predl. v strol. n0-113:23-26 155.
(Tanks) MRA 9:4)

ZAMA OVSFAXAO A.G.,, kand.okonomicheakikh nauk; GAZAROV, G.D.; ZININ, V.V.
Introduction of a new ayatem. for planning ship repair plant operations
Trudy, TSNIIW no.29:33-42 060. (KM 15:11)
1. Nachallnik planovogo ot*la Sudoremontnogo zavoda Keplyskogo
parokbodstva imni Parishokoy Kommrq (for Gazarov). 2. Zamestitell
nachalluika pLLnovo o otd la Kaspiyokogo parokhodstva (for Zinin).
-Nidntenence and repair)
(Mbrehant marine-Cost of operation)

VINOKMVP V.A.; GAZARTAN. A.5.
Deformations during electric slag welding. Avtom. avar. 13 no-9:3-
11 s 16o. (MIRA 13:10)
1. Moskovskoys vyssheye tekhnicheskoye uchilishche Im. Baumina.
(Alectric welding) (Deformations (Mechanics))

GAZARYAN, G. S. Cand Tech Sal -- (diss) "Problems of joint and separate
working of several strata." Baku, 1959. 11 pp (Min of Higher and Secondary
'JiRs of
Specialized Education USSR. Aserbaydzhan Order of Labor Red Ijann-a"troleum
ond Chemistry im A* Atitbekor), 150 copies (KL, 47-59, 114)
-23-

CONCHAROV, K.F.; DOBROBORSKIY, S.A.; SIDO:tOV, P.N.;
KOROSTASHEVSKIY, R.V.; KABANETS, Ya.P.; CGROWKO, Ye.M.;
KARASIK, P.I..-GAZAROV, L.A.; YAKHIN, B.A.; GORIN,
N.V.P red.; PO,ffkltl~, -". . . tekhn. red.
[Ball and roller bearings; catalog and handbook] Shariko-
vye i rolikovye podshipniki; katalog-spravochnik. Izd.2.,
ispr. i dop. Moskva, 1963. 379 p. (MIRA 17:3)
1. Moscow. TSentrallnyy institut nauchno-tekhnichoskoy in-
formatsii po avtorpatizatsii i mashinostroyeniy-u. 2. Nauchwe
sotrudniki Vsesoyuznogo nauchno-issledovatellskogo konstruk-
torsko-tekhnologicheskogo instituta podshipnikovoy proinysh-
lennosti (for all except Gorin, Folyanskaya).

, ~ "// ~ ~ "
93-6-6/20
AUTHOR: Gazarov, N.A.
-----------------
TITLE: Kinematics of 3-Cutter Bits (K voprosu kinematiki trekhsharoshechnykh
dolot)
PERIODICAL: Neftyanoye,khazyaystvo, 1957, Nr 6, pp. 19-22 (USSR)
ABSTRACT: The author asserts that certain aspects of the vertical movement of a
bit in rotary drilling have notbeen formulated clearly. A study of
the kinematics of bits makes it possible to understand the mechanism of the
drilling-crushing action and leads to conclusions which are of great
value in selecting the best designs for bits. The bit under discussion
has three conic cutters equipped with rows of teeth. The cutter is'
considered an integral part of the bit and drill pipe column. For the
sake of analysis it is assumed that the cutter Is placed on the smooth
horizontal hard face of the hole. At the start the cutter may rest
either on the apices of one row of teeth or on the apices of two
adjoining rows of teeth. Both of these situations are analyzed, their
consequences pointed out, and a mathematical representation of periodic
regularity of the vertical movement of the bit is given. The mathe-
matical derivation of a formula for the vertical movement is also
given and compared with the formula arrived at by V.S. Fedorov in his
work."Scientific Principles of Drilling TechniqueR (Naucbnyye asnovy
rezhimov bureniya). The author concludes that Fedorov's equation is
Card 1/2 incorrect. Equations representing the movement of any given poidt

Kinematics of 3-Cuttei Bits (cont)
93-6-6/20
on the cutter are giveng the vertical movement of the bit being taken into
account. In conclusionp It is stated thit such an analysis of work performed
by tricone cutters on an absolutely smooth and hard face of a hole clarifies
certain problems of cutter kinematics not raised by other authors. The beat
shape for a cutter is one which will en5ure a uniform participation of all
teeth in the rolling-crushing action and which will eliminate undesirable
overloading of individual sections of the working surface.
AVAIIABLE-. Library'of Congress
Card 2/2

140) SOV/152-59-1-6/31
AUTHOR: Gazarovp No A.
TITLE: On the question of the Dynamics of Vertical Shifts of a Bit
With Three Killing Tools of the Impact Drilling Equipment
(K voprosu dinamiki v6rtikalfnykh peremeshcheniy trekhsharoshech-
nogo dolota udarnogo vooruzheniya)
PERIODICAL: Izvestiya vysshikh uohebnykh zavedeniy. Neft' i gaz, 1959,
Nr 1, pp 27-33 (USSR)
ABSTRACT: The geometrical investigation of vertical shifts by the author
(Ref 1) furnished formula (1), which holds both for the lifting
of the bit to the apex of the oulling tooth and for the lowering
of the bit to the apices of the two neighboring teeth of the
milling tool. A more thorough investigation shows, howeverg that
the two shifts differ greatly from one another. Formulas (11)
and (12) are derived, showing that the lifting velocity is dif-
ferent. from the lowering speed. The calculations made show that
under otherwise equal conditions v lowering'> Vlifting. In dril-
ling especially hard rock the main demolition occurs in the
Card 1/2 lowering of the -tool from the apex of the tooth. The theorem on

SOV/152-59-1-6/31
On the question of the Dynamics of Vertical Shifts of a Bit With Three
Milling Toole of the Impact Drilling Equipment
the increasing angular momentum during the lowering of the too!
is applied, and the effect of the impact is estimated on the
assumption that the demolition of the rook is proportional to
the impact. Formula (14) is derived. It combines all main para-
meters affecting the drilling operation: the axial pr:s:ure P1,
the number of teeth Z of the milling tool, and the sp e of
rotation of the bit n.. Formula (14) is then transformed into
formula (15)D which basically determines the profitability of
drilling rocks of different hardness. The number of milling teeth
is not arbitrary but depends on the physical and mechanical
properties of the rook. The results obtained by this method
agree with those obtained in the experiments conducted at the
VNII BT and those obtained in actual drilling operations on the
oil fields. There are 1 figure, I table, and 3 Soviet references.
ASSOCIATION: Azerbaydzhanskiv industrialInyy inqtitut im. M. Azizbekova
(Azerbaydzha. Instit-, te Imeni M. Azizboko-r)
SUBMITTED: July 15, 1958'
Card 2/2

GAZAROV. IT.A.
---------------------
Biting of tooth into rocks and the xnchanical drilling speed of
a percuunion bit. Izv. v78. ucheb. zav.; neft' i gaz 2 no.8:25-26
'59. (HIRA 12:11)
lwAserbayfthauskly institut nefti i khimil im. 14. Asizbokova.
(oil vandrilling)

GAZLRGV, N.A.
Speed of the combined motion of cone teeth. Izv. vys. ucheb.
zav.; neft' i gas 3 no-909-41 160. (MA 14:4)
1. Aserbaydzhanakiy inatitut nefti i khimii imeni M.Azizbokova.
(Oil well drillin )

mk-_'4A4~, - S. T
C Is 1%
OBBI/Volding., Mv 1947
Detection, X-ray
"Determining Internal Stresses In Welding Joints
by Roentgen Rays," S. T. Hazarov, Ya. Z. Sanobuk,
3 pp
"kvtogennoye Delo" No
Discusses two types of stress, in X- and V-shaped
seams, of vhich the second can be neutralized by
thermal treatment.
12T3

S/181/60/002/01/33/039,
??00 BOOS/BO14
AUTHORS: Kolomiyets, B. T., Hazarova, T. F.
woo'
TITLE: The Part Played by Impurities in the Conductivity of
Vitreous As.,SeTe,,
PERIODICALt Fizika tverdogo tela, 1960, Vol. 2, No.1, pp. 174-176
TEXT: The authors studied the part played by impurities in vitreous and
crystalline substances of the same,composition. They chose
A82 Se 3 ' 2As2Te3(As2SeTed for this purpose. When the melt of this sub-
stance is slowly cooled it crystallizes, and it becomes vitreous when it
is suddenly cooled. This substance was produced from high-purity elements,
and was additionally purified by zonal recrystallization. A table list
the mean values of the conductivity of glassesPnd crystalline As.SeTe.1-41'
immediately after synthesis and zonal recrystallization. It may be seen
that after zonal fusion has been carried out the conductivity of the
crystalline substance is lowered by three orders of magnitude and passes
Card 1/2 q1

; I ' Z'
The Part Played by Impurities in the S/181/60/002/01/33/035
Conductivity of Vitreous As2SeTe2 BOO8/BO14
from the p-type to the n-type. The electrical properties of vitreous
As2SeTe2, however, remain unchanged. The conductivity of the crystalline
material has a different temperature dependence before and after zonal
fusion. The activation energy of the impurity centers, determined from
temperature characteristics, amounts to 0.4 ey. The temperature depend-
ence of the conductivity of vitreous material is not influenced by the
degree of purity. It is characterized by the activation energy of the
1.0-ev carriers. The temperature characteristics of crystalline and
vitreous As2SeTe2 are shown in the figure. There are 1 figure, 1 table,
and 4 Soviet references.
ASSOCIATION: Leningradskiy fiziko-tekhnicheskiy institut AN SSSR
(Leningrad Institute of Physics and Technology, AS USSR)
SUBMITTEDt
Card 2/2
August 1, 1959
+/

UZIMICHEV, P.; GAZARYAN, A., prepcdavatel.l.
'--: - - -,
Organization of pracbic~~ tralrdng. Prof.-tekh.obr.12 no.2:8-10
F '55. (MIRA 8:5)
1. Direktor ra"alannogo uchilichcha po makhanizataii. sel'skogo
khozysyst7a No,20 (Moska7skara oblast) (for KuzImichev).
(Technical eiiucation) (Manual training)

G,VAZYAN, A.D.1 CHALWKYAN, V.0.
Ionization of hydrogen atoms wider intense electromagnetic
irradiation. Dokl. AN Arm. SSR 41 no.1:27-33 165.
1. Ob"yedinennaya radiatsionnaya laboratoriya
Yerevanskogo gosudarstvennogo universiteta.
21, 1965.
(MIRA :LS:8)
AN Arjr.9,9R J.
SubuLitted -Jan,.lxir7

GAZ'A.ZYAN, It.D.
Non-clativistic analogy of the lz,.,.
All Am. SSR. Ser.fiz.-Pwit. naul: 18 no. '17 -, II-F- .132 ": 4".
0-11"u,
1. Ob"Yedinermaya radiatstonnaya luborut--)r;,Y(I:-r-,-2-;Irqk'~gO
-osudarr -o un' " -,.- ~`-
, Lvenriog werstteta " AN . -,J,
g

GAZARIYAN, A.G.
The complex
i kart. no.
of reco-al sance and construction operationa. Good.
4:29-30 AP 161. (MIRA 14:5)
(Surveying)

GAZARYPII,, Artem Grigorly,qviq~i USTENKO, V.L., red.; FETROPOLISKAYA,
...... iQ.p OVA,'V.F,., tekhn. red.
[Our experience in the use of bydrocyclone installations]
Nash opyt primeneniia gidrotsiklonrykh ustanovok. Kuibyshev,
Kuibyahevskoe knizhnoe izd-vo, 1962. 22 p.
(MIRA 17: 1)

TUZBASW, Lev Geraeimovich;_M;~ART4k,, A H '4 inzh , nnuchnyy red.;
KAPLAN, M.Ya., red.isd-va; PUNHIN, Te.A:, teklui.red.
[Designing and building large-panel houses] Opyt proektiro-
vaniia L stroitallstva krupnopanelInykh domov. Leningrad. Goo.
izd-vo lit-ry po stroit.materialam, 1959. 144 p. (MIRA 12:12)
(Apartment houses) (Concrete slabs)

GLURYAN, I.S.. sanitarnyy vrach; KOZIUN. Kh.A., samitarnyy vrach
Appliance for washing milkmaids' hands and cove' udders. Gig. i
san. 21 no.4:56-57 Ap 156. (KLVA 9:7)
1. Is Agdamskoy rayounoy manitarno-spidesiologichaskoy otantaii I
(MILK,
hyg. appliance for washing of hands & udders (Bus))

VINOKUROV, Vo A@. kand. tokhn,-nauk; 9MART_M,_A. -%., inzh.
Residual strooseB in very thick laminated seams. Izv. v3ra.
uchob, zavol mehinostr.-no.7:347-154 162 tMIR& 36;1)-
1. Mookovskoye vyssheye takhnichookaye uchilishche imeni
Baumana.
(Welding) (Strains and stresses)

UAZAhW P A- 6 - v vrach
Effectivenes3 of the decolorization reaction of methylene blue in
malignant neoplasms. Aserb. med. zhur. no.8:61-62 Ag 161.
1 WliA 15:2)
1. Is kliniko-cliagnostichaskoy laboratorli (zav. - A.S.Gazaryan)
Stepanakertakoy oblastnoy polikliniki (glavnyy vrach - Sh.P.Daniyolymn)-
(CANCER) JWTIMAAL SL E)

18(7) SOV/125-12-6-3/14
,MJTHOR- Yurkin, S.A. and Fishkis, MX. , Candidates of Technical
Sciences, Vinokurov, V.A., Oazaryan US., Fngineprs
~'ITLE: T..-Teasuring of Deformation and Stress at the Vlelding of
Flements with great Thickness mride of St. 3
PERIODICAL: Avtomaticheskaya sverka, 195q, Vol 12
Pr 6 (7q)
,
pp 22-27 (USSTO
ABSTRACT: The article presents the description of experiments
on the definition of quantity and charscter of residual
stress in steel-samples of great thickness, welded the
"electric slag" way. The experiments were made by the
,selding laboratory of IIVTU imeni Paumann, together :,rith.
bhe Tloscow automobile plant imeni Likhachev. The expe-
riments were made to s+iidy: 1) The develonment of de-
formations in large size welded loints in course
of time, 2) The field of residual stress in buttwelds
of elements with great thickness, 3) 'The taking down
Card 1/3 of residual stress by heat treptment. The deformations
in course of time were produced by a mechanical press

SOV/125-12-6-3/14
Measuring of Deformation and Stress at the Welding of Plements
with great Thickness made of St.3
with a strength of 3.5 thousand tons (fig. 1 and 2)_
The material of all samples was a low carbon steel of
type !' St 3 with following chemical compounds: 0,14-
0 22e C, 0.40-0.65" Yn, 0.12-0~30~ 201, not more than
0:055(,.4 S and less than 0.051" P.The mechanical quali-
ties of t-,e steel were: dA = 38-41 Kg/mm. , d, = 24 !~gl
mm2 and ~ = 27~~. The experimental investigation of
triaxial stress showed, that the theoretical calcula-
tion (Ref. 2) does not correspond with t1he results off
the experiment. A deformation along the welds in.not
loaded constructions, made of elements of great
thickness, during a considerable length of time (ca.
60 times within 2 months) was not observed. It is dif-
ficult to say anything about the possibilities of de-
formation over longer periods of time. The average
stress (7rjo in all bands of unannealed samples was not
Card 2/3 higher than 300 Kg/cm (Pig 3). There are 2 diagrams

SOV/125-lP-6-3/14
T* ,.,.Furin,- of Deformation and Stress at the Welding of Elements
-ith -roa-u Thickness made of St. 3
1 graph, 1 equation and 7 references, 5 of which are
~',oviet and 2 English
ASSOCIATION: TTVTu im. 'Paumana ONTU imeni Pauman)(Kurkin, Vinokurov,Gazar-
yan); avtozavod im. Likhacheva (Automobile '-Plant imeni T,ikhache-,)(Fishkis).
SUBMITTED: 7ebruary 25, 1959
(7f-,rd 3/3