SCIENTIFIC ABSTRACT A.A. DANIYELYAN - V. DANK

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP86-00513R000509710012-6
Release Decision: 
RIF
Original Classification: 
S
Document Page Count: 
100
Document Creation Date: 
November 2, 2016
Document Release Date: 
August 25, 2000
Sequence Number: 
12
Case Number: 
Publication Date: 
December 31, 1967
Content Type: 
SCIENTIFIC ABSTRACT
File: 
AttachmentSize
PDF icon CIA-RDP86-00513R000509710012-6.pdf2.66 MB
Body: 
11M PHASE I BOOK EXPIoc-*TATION SOV/2476 Aliverdizadet K.S.Y A.A. Daniyelyan, V. I. Dokumentov, A.K. Ibatulov, V.O. Pakhlavuni (ffe-ce-aYeIT,--I-.-G.-Chicherov, and S.V. Yurkevskiy Raschet i konstruirovaniye oboradovaniya dlva ekspluatataii neftyanykh skvazhin (Design and Construction of Equi]pment for Oil Well Exploitation) Moscow, Gostoptekhizdat, 1959. 652 p. Errata slip inserted. 3,500 copies printed. , Exec. Ed.: A.A. Gor1kova; Tech. Ed.: E.A. Mukhina. PURPOSE: This book is intended for engineers and technicians of oilfields, machine- "Xlding and repair plants, and scientific research institutes. It may also be -useful to students of petroleum vuzes and departments. COVERAGE; The authors discuss calculation and design principles of equipment used in oil well operation. In some instances the desiga of production equipment is also discussed. No personalities are mentioned. There are 66 references, all Boviet, Card 1/4 Design and Construction of Equilnent (Cont.) SOV/2476 Ch- 3. Equipment for Extractiw.5 Petroleum by the Deep-well Pump Method 139 1. Drives for deep-well pumps 142 2. Deep-well rod.pumps 2114 3. Submersible rodless pumpii 282 Ch. 4. Equipment and Tools for Subpurface Repair pf Wells 334 1. Hoists 334 2. FlusAing assemblies 389 3. Power equipment 396 4. Lorering and lifting equLpdent and tools 393 5. Drilling derricks and masts 419 6. Drilling tools 431 Ch. 5. Equipment for Well Sealing, and for Gathering, Storing, and Transporting Petrolew and Gas 455 1. Equipment for gathering petroleum and gas 455 2. Equipment for storing petroleum at field gathering stations and tank farms 466 3- Pumi)s 485 Card 3/4 DARMPLTAN, A.A. Develop automatic control In oil ?Ield production. Bezop. truda v prom. 3 no.11:8 N '59- (MIU 13:3) 1.1),%Lraktor Azerbaydzhanskogo nauchno-istledovatel'skogo instituta neftyanogo mashinostroyanira. on methods) (Oil fields--Producti (Automatic control) A tj ABRAMOV, N.A.; AL.IVMWIZALE. K.S.; AMIROV. Te.K.-, ARENSON, R.I.; ARSUITRY, $.I.; BAGDASARoir, R.M.; BAGDASAROV, G.A.; BADAKTANTS. A.A.; DAKIM LTAN, G.N.; D2R&FAROV, A.A.; XAZAK, A.B.; EMCHNNSKIT, X.M.; KOXYU- KHOV, 3.1,,; KRLSNCBAYEV, A.V.; KIM OVSKIY, A.I.; 1-11-AZAROV, G.S.: LARIONOV, Te.P.,- LISMURTIN, M.Te.; LIVSHITS, B.L.; LISIKTAN9 X.A.; LOGINOVSKIT. V.I.; LTSWOVSKIT, P.S.; MMCHANOV, G.V.; MAT- DMIKAH, N.M.; CKHOHIKO, S.K.; ROKANIKHIN, V.A.; ROSIN, I.I.: XU- STAMOVI E.K.; SARKISOV, R.T.; S1MTPHIK, P.I.; SOBOLEV. N.A.; TARA,- TUTA, R.N.; TVCROGOVA. L.H.; TER-GRIGORYAR, A.I.; USACH&V. V.I.-, FATH, B.P.; CM.CHEROV, L.G.; SHAPIRO, Z.L.; SHKVCHUK, Tu.I.; TSUDIK, A.A.: ABU040Y, P.M., red.: HARTTHOVA, M.P., vedushchiy red.;. _DAfijTXr_-. LTAN, A.A,; TROFIMOV. A.V., tekhn.red, (Oil field equipment; in six volume] Neftionoe oborudovanie; v shesti tomakh. Koekva. Goo.nauchno-tekhn.izd-vo neft. i gorno- toplivnoi lit-:-y. Vol.3- (Petroleum production equipment] Obo- rudovanie i Inetrument dlia dobychi nefti. 1960. 183 p. (MIRA 13:4) (Oil fields-Equipment and supplies) DANIYELYAN, A.A. New designs of the Azerbaijan Research Institute of Oil Machinery. Ifel'tyianik 5 no.9:2j 5 16o. (MIRA 13:9) 1. Direktor Asitmasha. (Oil fields--Equipment and supplies) @Ix 11 DANHELYAS, A.A.; DADASHEV, B.A. Oil well tubing standards must further the mechanization of oil field operations. Neft. khoz. 38 no.10:26-28 0 160. (MIRA 13:9) (Oil welle-Equipment and supplies) DANIYELYAN Armais Avakovich; OSIPOV., K.G.., red.; SOLGANIK., Ms... ved. I @@@ red.; POLOSINA, A.S., tekbn. red. [Drillhig machines aM machanisma) Burovye mafihirq i mokhanizmy. Izd.2., dop. i perer. Moskvap Goo. nauchno-tekhn, izd-vo neft. i gornD-toplivno:t lit-rys 1961. 470 p. (MIRA 14:11) (Oil well drilling-Equipment and supplies) DAIJIYELYAN, A.A.; ADAMSKIY, V.V. Specialized transportation centars for movable oil field equipment, Neft. khoz. 39 no.5:53-56 My 161. - (MIRA 14-9) (Oil fields--Equipmont and supplies) KERSHEVBAUM, Yakov Markovich, prof., doktor tekhn. nauk; YUDOLDVICE, Mark Yakovlevich ,, inzb.; DANIYBLTAN#--A.JL.9 kand. teklm.nauk, zasl, Anzh. Azerbaydzhansli8y -SSR, r;tsenzent; SOLGANIK, G.Ya.,, ved. rod.; POLOSINA, A.S.j tekhn. red. (Repair and assemb3y of oil-field equipment] Remont i montazh neftepromyslovogo oborudovanila. Moskva, Gos.nauchno-tokhn. izd-vo neft.i gorno-toplivnoi lit-r7, 1962. 395 po (MIRA 15.1) (Oil fields-Equipment and supplies) SHATSOV., H.I.; RAKOVI F.P., inzh.,. AvEnsOV, A.A., inzh.; DAMIFT-YA t-A-A4 BERLIN, S.G.; GLYADKOVAO V.I., starshiy tekhnik; TURASIX, G.Te., inzho Standardized oil well drilling terminology. Neft. khoz. 40 no.5:66-69 My 162. 04IRA 15.9) 1. Gosudarstvannyy komitet Saveta Ministrov RSFSR po koordinatsii nauchno-iseledovatellskikh rabot (for Rakov). 2. Voesoyuznyy nauchno-issledovatellskiy institut po tekhnike bezopasnosti v neftyancy promyshlennosti. (for Avetisov). 3. Azer- badydzhanskiy nauchno.-issladovateliskiy institut neftyanogo mashi- nostroyeniya (for Daniyelyan, Berlin). 4. Bashnefteproyekt (for Glyadkova)- 5- Gosudarstverinoye ob"yedineniye Azerbaydzh&-xkoy neftyanoy promyBhlennosti (for Karasik). (Oil well drilling--Terminology) .DANMLYAN,_A.A.; IBRAGIMOV, E.S.; KMEAMOV, N.G. Basic trends in the over-all mechanization of extradeep well cementing. Azerb.neft.khos. 41 no.8t4O-44 Ag 162. (MIRA 16si) (Oil well cementing) DANTYELYAN, A.A.; ALIVNIIDIZADFt F.S. Basic trends in the construction of units for underground repair of wells. Neft. khoz. 46 no.8:49-56 Ag 162. (MIRA l7s2) ,.:I- TER-GRIGORYAN, A.I.; DAYIYELYAN, A.A.; SHAPIRO, Z.L. &juilverit for the hematic nealing of tLe wroll head in door., drilling. Neft. khoz. 41 no.2:19-25 F 163. (MIRA .171:8) DANIYELYAN ; KASIYAN, T.V., spets. red. [High-efficiency machining of parts on coViing lathes] IlysokoproluoditelInals. obrabotka detalei na tokarno- kopirovallnykh stankukh. Erevan, Aiastan, 1964. 99 P. (MIRA 18:9) GHOLUMTAN, D.Po@-,VA1TITZ1XU.--Ajh. Studying the process of fertilization and the initial stages of embryogenesis in corn pollinated by different methods. Izv. AR Arm. SSR Biol. i sellkhoz. nauki 11 no.6t57-67 Je 158. (MIRA 11:7) l.Kafedra Darvinizma i genetiki Terevanskogo gosudarstvennogo universitsta, (corn (maize)) (Fertilization of plants) WITEILTAII, A.Kh. Studying the initial phafles of embryogenesis in corn. Nauch. trudy grev.un. 64:203-206 158- (MIR& 11:12) 1. Kafedra darvinisma i genetiki Terevanskogo gosudaretvennogo univeraiteta. (corn (maize)) (Fertilization of plants) DANIXKI,)Mp A.Kh. _ Effoot of various pollination methods on certain stages of embryogeny In corn under conditions prevailing in the Ararat Plain. Nauch. trudy Erev. un. 69 Ur. biol nauk no. 8:155-r160 pt. I r0- (MIRA l4s4) 1, Kafedra. darvinizma i ganetiki Yerevanskogo gosudarstvennogo i4iiversitata. (ARARAT REGION-CORN MEEDING) (BOTAn-EmBRYoLor-Y) DANIYELYAN A . Kh. Embryological study of the process of fertilization in tobacco in Karao District. Izv.AN Am.SSR.Biol.nauki 15 no.7:67-69 Jl t62. (MIRA l5tll) 1. Kafedra darvinizza i genetiki biologicheskogo, fakullteta Yerevanskogo goeudaretvennogo universiteta. (FERTILIZATION OF PLANTS) (KAM3 DISTRICT-TOBACCO) DANIPLYANP A.M. Rezanie metallov i instrument. Moslcva. hatshb-iz., 1950. 450 P. illus- Bibliography: p. U5-(40). Metal cuttin.- and the tool. DLC: TJ1230.D3 So.- Manufacturing and Mechanical Fmgineering in the Soviet Union, Library of Congress) 1953. aR. A. ITSS, 1)1) 2. 1 in ',x-r-lillill HP-1110 of i n Dec o L. CO.-TititiO-1 Of l,,-,for7:i-,.I-)n of the USSR '-'.ichine nnd birtchino inwlutry Contained in So-,,Ir,t Publicottionn. @FJWIYGLY A4, A. Ni - PHASE I TREASURE ISLAND BIBLIOGRAPHICAL REPORT AID 438 1 BOOK Call No.: AF637182 Author: DANIYELYAN, A. M.., Dr. of Tech. Sci. Full Title: EFFECT OF HEAT AND THE WEAR OF TOOLS IN THE METALi CMTING PROMS Transliterated Title: Teplota i iznos instrumentov v protsesse reZaniya metallov Publishing Data Originating Agency: None Publishing House: State Scientific and Technical Publishing House of Literature on Mechanical Engineering Date: 1954 No. pp.: 276 No. of coPlez! 5,000. Editorial Staff: The author acknowledges the collaboration of Pevtsov, 0. it., Kand. of Tech. Scl., Leontlyev, A. A., Maslennikov, V.0., Levin, L. M. and Lider, V. Ya. Text Data Coverage: The book deals with problems of heat phenomena occurring in the cutting process, deformation of the metal in the zone of cutting, and the abrasion of the cutting tool. The author points out the im- portance of the heat effect on all main phenomena of the cutting pro- oess: deformation of metals, friction coefficient, cutting tool pressure, durability of tools, surface conditions, etc. He describes numerous tests carried out by Soviet metallurgists and bases his con- 1/3 Teplota I izrios instrumentov v protsesse rezaniya metallov AID 438 - I clusion3 on data obtained from these teats. Ch, I discusses factors affecting the deformation of the metal tooled: elasticity of the metal, cutting speed, shear thickness, angle of cutting, metal hardening,, shrinkage of cuttings, deepness of recessj etc. Ch. II analyses and evaluates various methods of measuring the cutting temperature. These methods are divided in three groups: (1) analyti- cal methods; (2) indirect methods of temperature measurement relating to colors of heated metalts, use of fusible agents, residual effects of temperature on the structure of the material of tools, traces of deformation left on the working surface, and calorimetry; (3) direct methods of temperature measurements: methods of thermo-couples and the radiation method. Ch.III gives general Information on abrasion of metals, special features of the abrasion of cutting tools, methods of abrasion testing and a review of the most important Soviet papers on the subject treated. Ch. IV describes tests carried out by the author and other Soviet mechanical engineers in order to establish rules governing wear and heat factors when different kinds of tools are used. Ch.'V discusses factors affecting the abrasion of cutting tools: cutting speed, tem 'Derature, cooling, shape of tools, etc. The book is a result of experimental research conducted by the author over a period of years. It contains data on practical technical 2/3 Teplota i iznos instrumentov v protsesse rezanlya metallov AID 438 - I application. The wear formulae presented in this book were proposed by the author in his previous works. These formulae have been criti- cised by M. I. Klushin in his Metal Cutting (Rezanlye metallov), Moscowo 1953. A reply to this criticism is given on pp. 2b 4-20b Of the present volume. TABLE OF C ONTENTS PAOES Foreword 3-4 Ch. I Deformation of the Metal in the Zone of Cutting in Relation to Conditions of Cutting and the Tool Contour and Size 5-29 Ch. II Heat Phenomena in Metal Cutting 30-95 Ch. III Wear of the Cutting Tool 96-128 Ch. IV Determination of Wear Conditions and Temperature Variations for Different Cutting Tools 129-262 Ch. V Variations In Cutting Speed with Relation to Wear and to Temperature . 263-273 Purpose: The book is intended for engineers of metal cutting plants, scientific workers, teachers and "Aspirants" of schools of advanced studies in mechanical engineering. Facilities: None No. of Russian and Slavic References: About 20 bibliographical footnotes. Available: A.I.D., Library of Congress. 3/3 POD' 1YRIOMCHIKOVA, Yelena Koustaxtinoyna; DABIYELYAN., A.M., doktor tokhai- kaididat tokhai- cheskikh zauk, professor, retseszoot; , * ';adaktor; OLADKM. aixeskikh sank, dotsaikt, redaktor; SWOROVA, I.A., N.N., tekhaichookiy redaktor. (Highspeed millixg of grooves by slab mills] Skoreettee froserevanie Pasov diskovymi freizami. Moskva, Goo.izd-ve obor.promyshl. 1955.14op- (KilliAg machiaes) (KLRA 9:5) DANIYRLYAN, A.M., doktor tekhnichenkM smak, professor. Effect of the ground. shop* of twist drills on cutting temperatures and forces. Vest.mash.35 ne.11:48-51 N 155. (MLBA 9:2) (Drilling amid boring) @22-1-11/34 AUTHOR: Daniyelyang A.M.@ Doctor of Technical Sciences, Professor. TITIE: The heat balance in the cutting of the titanium alloy BT2 (Teplovoy balans pri rezanii titanovogo splava VT2) .t?ERIODICAL: I'Vestnik Mashinostro-Teni all (Engineering Journal), I!_1 1957, 11001, PPO 39 - 43@U-*S-S.R.) ABSTRACT: Reference is made to the author's recently published work on the analysis of metal cutting processes by their heat balance and on the study of the cutting temperature as the main factor in machinijig. ("Teplovoy Balans Pri Rezanii Metalov" published by AN SSSRI 1955.) Bxperiments with the machining of a titanium alloy by tungsten carbide tipped tools are reported. A hollow cylindrical blank was clamped through a plastic cone for thermal and electrical insulation. The tool was also insulated. As in earlier work, the heat in the tool tip was measured by allowing the chips to fall into a calorimetric device. The temperature in the cutting zone was measured by usinS 'the insulated blank and tool as a natuial thermo-couple. The total heat was determined by measuring the vertical cuttLng force component and computing the power put in by the work spindle. The test results are plotted against the speed of cutting. The chip and cutting tool temper.;itures are compared. Card 1/2 The heat removed by the chip is larger in steel than in I 88651 S11231611000100110061015 AOO5/AOO1 Translation from: Referativnyy zhurnal, Mashinostroyeniye, 1961, No. 1, pp. 19-20, 1B176 AUTHOR: TITLE: The Thermal Balance at Cutting of Steel PERIODICAL: V sb.: "Teplovyye yavleniya pri obrabotke metallov rezaniyem". Moscow, 1959, PP. 106-126, 6 TEXT: The test@ have been conducted with hollow cast steel ingots of 40)( (4OKh) 68 kg/mm and HB 190) grade. In the high speed range (v > 70 m/min) the cutting was performed with the one-piece hard-alloy cutters of the T60K6 (T6OK6) make, in the low speed range (v < 70 m/min) , with one-piece high-speed cutters of the P18 (R18) make. The cutting temperature was measured by the natural thermocouple method. The calorimetric method was used for determining the average temperature of the chip, the cutter, and the processed part, as well as the heat supplied to them. The experiments were carried out under various conditions but with equal cutting duration. It turned out that 82% of the total heat amount is supplied to the chip at the cutting speed range up to 400 m/min; a further in- Card 1/2 88651 S112316 1/0w/00 1/006/015 The Thermal Balance at Cutting of Steel A005/AOOl crease in the cutting speed leads to a decrease In the percentage of heat In the chip (at v = 700 m/min it Is 7C%) ; the heat percentage in the work piece decreases for increasing cutting speed from 20 to 350 m/min; for a further increase of speed, the heat percentage in the work piece increases; an insignificant percent- age (0.7 - 8%) of the total heat amount is supplied to the cutter; the heat percentage In the cutter decreases with the cutting speed increasing from 10 to 600 m/min, for a further cutting speed increase, it increases a little.. The average percentages are given characterizing the heat balance in turning the steel 4OKh at the cutting speeds 20 - 50 and 100 - 350 m/min. - There are 16 figures. I. Bernshteyn Translator's note: This is the full translation of the original Russian abstract. Card 2/2 S/12 6110001012100fl/0C 7 D040YD112 AUTHORS: Daniyelyan, A.M., and Bobrik, P.I.. TITLE- Peculiarities of the heat phenomena in cuttinG refractory alloys PERIODICAL: Stanki i. ins-.rument, no. 12, 1961, 25-.27 TEXT: The article describes an experimental investigation of the heat bal- ance, i.e. the amount of heat absorbed by the chip, tool and workpiece (0-chip, Qtool, and qworkpiece), in cutting ."N867 (EEI667) and"P827 (EI827 refractory alloys, which possess great mechanical strength, particularly at high temperatures. Solid cutters ofBK.8 (VKS) alloy were used in the tests, The total amount of liberated heat was determined by the value of the work expended in the cutting process. A dynamometer was used for measuring the tangential component of the cutting force; the force component in The fef-d direction was ignored in view of its insignificant value.. Qchip, Qiool arid qworkpiece were determined by measuring the temperature of water in calori- meters of different shapes and sizes. The effect of the feed, cutting Fpeed and cutting depth on the heat balance was studied in three SeDarate serie? Card 1/5 S/121/61/000/012/005/007 Peculiarities of the D040/Dl12 of experiments. IncreasinE the cutting s eed,ihcreased the proportion of & tool in both alloys, although the Qchip and reduced that of workpiece and absolute values of all three components increased. At low cutting speeds, the quantity of heat absorbed by the chip was above 40%, a fazt not previ -' ously mentioned in the literature. Increasing the feed also increased the proportion of Qchip, which was partly due to the diminished .'-ontal-t are:'@ between the chip and the cutter, but the absolute values of Qtool and Qw.-.rV- piece also increased. The cutting depth had less effect on the heat balenc@ expressed in % than either the feed or cutting speed, t-ut increasing th.- cutting depth increased the absolute values of Qchip, Qkool and Qworkpie;-.e to a much greater extent that increasing the feed or (;utting speed. Ii is pointed out that the values of Qtool and '4workpie,,@e expies@-.-d in % xere times higher for the EI867 and B1827 alloys than for the B14')7 refrart,,.,.*f alloy. Conclusions: (1) The high percentage of heat iransierred to lh@? workpiece and the cutter is characteristic in cutLinE E162-( And E1867, Low cutting speeds must be used in view of the high outting temperature recorded in the tests (2--4 times above the temperature reactled wl-en c-atting machinery steels)e (3) The proportion (and absolute quantity) ()f Card 2/3 Peculiarities of the ... S/121/61/r,00/012/005/007 D040/1)112 transferred to the chip, :rises abruptly when the feed and cutting- s@,eed are increasedi (4) The heat balance for the EI827 and EI067 alloys may b-, characterized by the following mean values when s @ 0.12 mi:i/rkiv and mm): Heat transfer Amount of heat in at v (.in m/mir,. 3 Into the chip 25 Into the workpiece ... 45 Into the cutter ... 30 35 20 (5) Measures have to be ta.,:en to lower the temperature in t,,,e cut@inj zorie e.g. by cooling. There are 7 ficures and 3 Soviet ref'er@'ncej. Card 3/3 3/121/62/000/006/010/011 1)040/1)113 M Daniyelyini, and Gritsayenko, Yu. A. AUTHL jn.;trui.,.ent, no. 6, 1962, 43-44 r In Zcbroav@- -11962,a conference was heLd ill Moscow by the Moskovskoyc NTO -(IA)Pl'0'J (Moscow NfO ,,'ashpro,ti) arid the Aoskovskiy dom nauchno-teldinicheskoy propa-ai-.03- iiii. Z.i@. Dzk@.rzhinsko,,o (Mo!icow House of Scientific and Technical. Propaganda ini. Z.Z.I)zex-=hinskiy) to discuss the development of the use of ultra- 3011iC VibratiOll ili LlCtiLl CUttilg. ;even reports heard attlic conlerence are re- viewed and the work doiic by dif ferent organizations outlined. Generail;-, rejearch st@cm.s to be ill the clilbryo sta@,,c, arid any final rccoiiiiiiendatimis for industry are az@ yet _,,,-,Possible. '.Io:it experiments were conducted at low cutting speed. The proper cutting speed ran-c arid the effect of ultrasonic vibration Oil the size of plastic dcfon;tation, the wear arid durability of tools, the cutting force arid. tci.@pevature, the strain hardening of metal ill the cutting zone, machining accu- racy, surface finish, optinium vibration frequency and optimlmi wave orientation Card 113 j/1 "1/62/000/006/01.0/011 Vibrational cuttin- D040/D113 0 have not yet been clarified. No instmunents are yet av4ilable for measuring the real para@iicters of ultrasonic vibration in the cutting procelis. TSNIIT.',R3h experimented with vibrational turning of 1)(18H 9T (1KUSM) steel; increased durability was observed only at certain vibration aniplitudes where vibrations occurred aL ri,,ht an-Le.,; to the tool surface subject to the highe6t wear. Netal @u;:iperature in vibrational cutting was higher than in conventional cutting, the chip shriiika@;e was halved, the rican cutting effort reduced, and the work surface finish Luproved. The scune was observed in turning and reaming 2 other steels an,d the ET 2 (VT2) titanim alloy. Data compiled by MVTU iiii. Bauniana (WTU ii.i. Babman) showed that the life of drills in drillin.- holes in nuts of stainless .-iteel wa; trebled; even better tool life was observed in cutting heat-resistant stoclb with high-speed steel cutters when the vibration was perpendicular to the work surface, and the vibration amplitude was low (JoIL); frequencies and below 500 Cp-, III, wop't with hydraulic and electrohydraulic device-L pemiitted dependable.splitting of chips and reduced the cuttin- effort; the tei,iperature dropped in certain cutting conditions. The Tullskiy mekhanicheskiy @titut (Tula Mechanical Ln.-ineerin-g Institute) could raise the feed of drills Card 2/3 DAHIYELYAN A 14. dok-t4r_tekhn*naukj prof., zasluzhennyy de,,atel' nauki i j --9.- -- - RSI-'3R; PARSHIN, I.F., kand,tekhr..nauk, dots3nt Effect of the material of the cutting part and the cross section of the cutting tool on thermal deformations of the @ool. Trudy W.TI no.5'3-'5-7 162. (HIRA 15,.6) (Metal-cutting tools-Testing) @oo ho6h4 S/536/62/000/053/001/002 1048/1248 AUTHORS: Daniy@@A.@@4., Doctor of Technical Sciences, Prof., and Bobrik. 11. L. Candidate of Technical Sciences, Docent TITLE: Some problems of the physics of cutting of refractory alloys PERIODICAL Moscow. Aviatsionnyy ickhnologicheskiy institut. Trudy, no. 53, 1962, lsslcdovanlya v oblasti mckhanichcskoy obrabotki mctallov 8-22 TEXT: Physical phenomena associated with the cutting of a Ni-Cr-Al alloy (alloy A) and a Ni-Cr-Al-Co alloy (alloy B) were studied, The hardness of these alloys increased after application of high pressures, e g., the hardness on the surface of a Brinell identation impression (3000 kg. load) was 9-12 Rockwell units higher than that on the remaining surface of the specimen. The force required for cutting increased with increasing rates of feeding and was generally 2-3 times as high as that required for the cutting of conventional con- struction steels. The cutting force decreased sharply with increasing cutting velocity. The cutting temperature was 300-400' at a cutting velocity of 2-3 m./min., and 1000' m./min. The main factor affecting the cutting temperature was the cutting velocity; the rate of feeding and the cutting depth %%ere of little importance The relative aniounts of heat transferred to the specimen and the cutter decrease, while that transferred to the shavings increases with increased cutting velocity. Sample values for the distribution of the heat evolved during cutting at a velocity of 3-15 m./min., a feeding of 0.12 mm./turn, and a cutting depth of 1.5 nini are to the specimen 45%. to the cutter 30%, and to the shavings 25% of the total. There arc 22 figs. and 2 tables Card 1/1 DANIYELYAN.,-,A..M.,, GRI,.rsAysNKO, Yu.A. Utilization of vibrat'ions in machining. Stan.1 Instr. )3 no,6:43-44 Je 162. (MIRA l5s7) (Metal cutting-Vibration) Fryj "M rZIR 3513-66 EWT(m)/WA(d)/Ee(.t)/WPk)/EVP(%)/94P(b) IJP(e) JDIJO AM5019283.' BOOK EXPLOITATION Uk/ UDK62l00s669.l4.Ol8*'44 DgniyelXan, Arutzum Mkrtichavich (Doctor of Technical Sciences; Pro"4A fesmor);--nYtIR -7PWF`2VVWRVrW.- Curevich YAnkell Leybovich; YEnorov Ivan Sar w evic e il_(c b r aot .,Machi in eat-reisistant:st el, alloys and refractory metale re'zaniyem zharoprochnykh staley, eplavov i tugoplavkikh.-.metallov) Moscow, Ixd .vo It MashLnostroyeuiye"; 1965. 306 p. illus., bLblioq Errata slip Inserted, 5700 'copies printed, TOPIC TAGS$ machining, heat.resistant steel machining. refractor metal machining,.hent.resistant alloy machiningo titanium alloy machining, beryllium machining'# rare metal machining *,-,7 2@7 P ANWCOVERAGEt This book is into d4d for engineering personnel URPOSE of machine-obuilding plants, scientific research institutes, and ."I engineering design bureaus*- It may also be xseful to students.of schools of'higher technical education specia-lizing in technologys The book ravLe.,Ws.specific-technological features and aspects of various procedures ..of - mach in in 9 he a t-re a I a t a* tand refractory metals Card 114 AM5019283 dnd'allo@s* In P*Arttcultr@ Li deals with metal turning, milling- boring, threading, and broaching,, Suggestions are made on the selectiqn of moiterials,used for contact surfaces of tools, tool shapes, and efficient m4chining conditions, It also presents an analysio,of thermal 'pheuomenajobserved'@n t1i process of machining* TABLE OF CONTiNTSt V, Foreword '3- Part le ftesent Heat Resistant HateriAls and C I as a L f L c a tion Based 'on Their Hachinability (Ya. L. Gurevich),--, 5 Part" 110 Certain Physical Pvoblems@of Machinieg Heat-Risistant Steel ...and Alloys-(P*.Jb B6brik) 23 Cit. 1. Analyising the "Thermal' Yield and Calculating.the Machinlng@ vo -23 Temperatu 2/4" ,cc Ch. 7. Tbr 195 _qading% l @ Part V, Hach ining of Refractory an@ Rare Hitals (Z,fSo _Yegorov) 212@' @h. 1. , Haiu@Physical,.'HechauLcal and-Ch emical-propeiti 8, of Rare and Ref ractory, 11stals. -'212 77, Ch. 2.' HachiuLng-.Re f ractoiy- Metals 2 116-"- Ch. 3, SUB CODE: Hk - - "Idam TED t ,",- A 7H&t6 5;`i_@ 140 REF @SOVs Los %i . OTHER: 35 3" car - 1 0 104 77 e@lmlmg@" - ofm Ielaw 0 c tN Abd 2,rLrkj S!P7 73.) no Vm Vol, ai N4.41i wovember, 1K PP.MS-M, , ;. 7 1. I)AIITYMYAN...7 6. 0. 2. ussR (6oo) 4- Wine and Wine making 7- Yore about so-called "trifles," Vin. SS3R, 12, No. 1, 1953- 9. Monthli List of Russian Accessions, Library of Congress, I%prfl. -1953, Uncl. MINMYAN, Sh.j DATTYAN, E.; DANIYELYAN. E. High-speed mining of a crosscut at th6 Kafan Copper-Mining Combine. Prom.Arm. 4 no.6:48-52 Je 161. (MIRA 14:8) 1. Sovnarkhoza Armyanskoy SSR (for Minasyunj Daytyan). 2. KafanskJ.y mednorudnyy kombinat. (Kafan-Copper mines and mining) DAVIYELYAW, Me.; STRELILIKOVA, V.G. - - Cwes of mycosia caused by the fungi Ilicrosporun [,,Ypseum and Microsporum lanosum. in Erivan.Zhur. eksp. i klin. mod. 3 no.l: 105-108163. (I-MU 16:10) le Yerevarskiy gorodskoy kozhno-venerologicheskiy dispanser. (ERIVAN - MYCOSIS) (ERIVAI; - raCROUCRUM) DANIYELYA.N, E.Ye.; MIRAKYAN, M.Ye.; AYRAFETYANP M.A. Occupational skin aspergillosis. Vest, deria. i ven. 38 no.4:83- 85 Ap 164- (MIRA 1814) 1. Kafedra kozhnykh i venericheskikh bolezriny (zav. - dotsent G.D.Ter-Grigoryan) Yerevanskogo meditsins@ogo Instituta i Institut gigiyeny truda i professionallnykh zabolev&niy (dir. R.A. Aydinyan) Ministetstva zdravookhranenlya Amyanskoy SSR. DANIYELYAN, E.Ye. Fungi and epidemiology of triobomycones In the Armenian S.S.R. Vest. derm. i van. 38 no.lOt48-51 0 164. (MlRA 18:71 1. Kafedra kozhnykh i venericheakikl, bolezney (zav. - dotsent G.D. Ter-GrIgoryan) Yerevanskogo meditainakogo instituta. FILATUVY V.I., doktor med. nauk,--DjXLjXELYtN, FA a_ __ __, Role of the blood and blo-d substitutes in the rrophylaxis and treatment of burn exhauntion. Probl. gerzt. i pa-rul. krovi 9 no.9.-22-25 S 164. (INIRA 18:7) 1. Khirurgicheskaya klinika (nachal'nLk - prof. T.Ya...'irlyev) Voyenno-meditsinskoy ordena akademii imeni S.M.Kirova, Lenin- grad. CtYIJSYATI, R.R.; MIYELYM, F.D. New and rare 8pecies of bats in the Annenian S.S.R. Izv. AN A-m. SSR biol. nauki 16 no.8tl.13-IIJ+ Ag163 (MIRA 17:4) 1. lAkILLI Vl-rvvanflr-oUo gosudart3tvennogo ul@2ivcvnituta. Mechanism of reproductive isolation in nome forms of Lacerta Bax.lcola Evernmann occurring In Armenia. Izv. AN Arm.SSR. Biol.nauki 19 no.10:75-80 0 165. (MIRA 18:12) 1. Yerevanskiy govudaratveruiyy universitet, kafed-ra zoologil. Submitted December 2, 1964. DANIYSLYAN G inuh, Ways of saving electric power in hydroelectric power plants. Prom.Arm. 5 no.11:1,7-1,9 N 162. (KTRA 15:12) (Armenia-Hydroelectric power stations) DANIYEILYAN, (-,. A. Dai-dyely-in, G. A. - "Tho 'L.@itlal plate in.fresh in.;'urieo (A' `v nd 31@ornd@ i@..uch. Lrudov (ln-t .;@ "(@ rol Lya ""'lk. ]-hirtarf,. lldird@,a Ye-revan.31:. i@.cd. In-ta), _L11, 1G48, 1). 111-27 SO . 'U-!+3355, 1/1 hu:--uot --3, ( '@ I @'. I I rrn:.@' I I :I @-@ :11 @. 'I -.I t':.y' :.o. lf'll' I @."C' . ) DANIYZ1,Y,-0-,', 1. A. "Initial Plastic and Reconstructive Operations in 'Fre3h' Injuries to the I ".1rist and Fingors.11 Cand Med Sci, Yerevan 11,11edical In3t, 15 Dec 54. (K, 5 Dec 54) Survey of Scientific and Technical Dissertations Defended at 1U3SR Higher Educational Institutions (12) SO. Sum. No. 556, 24 Jun 55 DANIYELYAN, G. A. "-Early Clinical Roentgenological Diagnosis of Cancer of the Esophagus and Certain Precancerous Conditions." Cand Wt Sci, Yerevan State Medical Inst, Yerevan, 1955, (KL, No 11, Mar 55) SO: Sum. No. 670. 29 Sep 55---Survey of Scientific and Technical Dissertations Defended at USSR higher Mucational Institutions (15) FANARDMITAN, V.A.; DAMT&LIM.. Gr.L. Differential X-ray diagnostics of stomach cancer. Izv.AN Arm. SSR.Biol. i sel'khoz.nauki. 11 no.12:39-47 D 158. (MIRA 12:2) 1. Terevanakiy institut rentgenologit i onkologii Hinistorstva 7,dravookhraneniya ArmSSR. (STO14ACH-CA11CHR) (DIAGNOSIS, HADIOSCOPIC) ivy Lk AN N. ,y 434 m c@u@WI,Ioftl Tl@ --- AM US- 0 V&f"s rh_01911cal "" m 1~-Or F A JAN W A PAO-41 11 A, M, R n ` AN I 3-1-1 A N I F D J AN G A @ J ..&, IN, -1... .1 At...h .1 -11 a-.4 J.-M-A- oi@ ".w., wow A6,, t], -6 M rk -4 1,. . III WAA, @-l P.- a-- : 4:6 4-., lI, d. III ILI -6. = A P..d- 04 off$ I,, I.& Tu J.- . III. TV. .4.r.ok.ft, Z.A.W Zv. 0. 6. P-- = I A-k-14 -.1- 4 111. W- ILI, W pl.l- d :@ L.IIIoi, .w - 6. A..'& F-W. .0 OW 4-&- 1%. w&4 P-) -1 C-k-- -4 111 111 is -1. "6. .1 a 1 3 .1 lu ff- A. IIIift .6-4 M ku -My a I" .A. T6 4-"" 6-4 - - -.p 1. 1-11 P-*.ft At,,;rd " . L 4,= t A, n ;=, = = sovb" Alf= S.A.4-4 1--or" A " am ft, A-M.IX W-k.(C-Ik DI-4- MAN A M 5NrGIfAt #0.4 AA 4. 7%. -W ..4 lII-",.,4.1-,. 01- ,1111-9 A III F,4k- mrmr-t G A tf& UNZNARAI IN L D G A LJl,I, i,,,d AW I- 11111111-` 4 'U -4 &1-4 TL. -kk d 111,1 -5, owII TU h"l- -d W' 'II" h--d A. Tu of-&- 3n tm at, laterrAtiorAl conMes at padialoo, minich, 23-30 MY 1919- FANARDZHYAN, V.A.,, prof. (Yerevany ul.Dzhrashatq go); DANIYELYAN, C;.A.,, kand.med.naul- Functional changon in the gaitrointootinal system under tha action of proserins. Vest. rent. i rad. 35 no. 5:6-11 My-is 160o - (MIRA 14:2) 1. Iz kafedry rentgenologii i meditsinskoy radiologii (zav. - prof* V.A. Fanard7liyan) Yerevanskogo meditsinskogo instituta (direktor - prof. L.B. Arutyunyan). (ALIMNTARY CANAL) (NEOSTIGIMNE) PANARDZHYAN, V.A., prof.;_PpI-=XAX,-4r-A., starshiy naucbnyy sotrudnik Modern state of X-ray diagnosis of stanacb cancero Toperentol, otk. 6t233-241 161, (MIRA 16:2) (STCHACH-CANCER) (DIAGROSIS, RADIOSCOPIC) DARYMAN, G&A*.q kandomedtnauk Plastic surgery of the large intestine in gastrectomies neces- sitated by cancers Vbporent.i onk. 6t243-W 161. (MIRA 16:2) (INTESTINES--SURGM) (STCMACH-CAMER) FOARD.-HYAP, V.@., prct,.,, vAP.,Y, G'I.A., Y-rfty J @, of .@.,tn', V-@,, j_ i . - ,, to 16.1 flITT'A FfiN Art 0 'RVAN 'J,A. I , . -@ - 1 , . , .'.' : ' '..' @:' . - . , . ! - '-'i -(- ... - -1. 71: - G.A.., kan@ r.; - - ;'r. De i I or: i i I -@j 4 (-,.. , "1 1 yj t I @, t . - -sj , i I_ ! - , q' , ,@ -1 ..: 'i ,'a r. . Vop. rm!. -. ? C, ` f - ':,- -, ;.. @ ,. . . . , .' ..' . I @ I I I I DMUMUN, G.A., xLnt,4. jtj-a,j, AY:i@ !. "' I !N 1,.erlo@zve bi th-@-. (,f z--*tl:'nT-.-" _;,1- i'll'.il lk". rent. i fr'k. 7 44"J"i--'*7 i If-; *, -" %I i. @? t.- I) L I'-. LL i -Fr -.Y . 1, .!. f , , . i. @ I , . I . ': ) * - I . I . 1. 1 @ - , I t A.Ao, -nlp-,-@ .-,- '. -, - -1 , - . ... Non . pz :,' j -' j-. 4 -.. -', t, @, -. 11, . !,-*Lov@ : , , - - - * , : . 7 , - I - . ., I I I j . 1 1, . _ I i I I . I . . t , T@-,M, @ .:r,k. 1.'. 1., . I , ., DMI-AMYAN, G,A.,kfL-id. med. nuok; YF.Kin, M131, nq@.,k VSlUe Of P,%lllhA'Vd In of lft@2 g@o-trc -. in -t e!-% 4 -:--1 a, tract and tb,-- paricreaeo Vopo rant, I ork. vb3' (111RA DACNIZZLYPI1 G.A. RoplaeorloIlL of tile ;to,,;aC i jr, I iws wnd lotal gaz;ttrectumies with a yortior of tho trarsvt-roc- c,Jon. 1@',-,Irur.-Iia -10 no.9t24-Z7 S f64 11082) otdeler.1ye (z,iv. G.A. 113.-ILituta rentgenolot"11 1 mkologit ;hlur* L AM, IISSIL pi-cf. V.A. !,'zu;ardzhyaji) AN Arrp-t.fikoy &-f-1, DANIYELYAN, G.A., kand. med. nauk Formation of an artificial stomach from a segment of the transverse colon following gastrectomy for cancar. Vest. k-hir. 94 no.2:108-IrI9 F 165. (MIRA 18:5) 1. Iz khirurgicheskogo otdeleniya (rukovoditell - starshiy nauchnyy sotrudnik G.A. Daniyelyan) Yerevanskogo instituta rentgenologii i onkologii (dir. - prof. V.A. Fanardzhyan) A11,111 SSSR. - .DANI.YELYAN,,_G.A.; MIRAKIAN,, M.M. EyperJmental oubeLitution of the s;,Omach following its reBection and gastrectomy by a sellment from the large intestine. Eksper. khir. i anest. 9 no.5:27-30 S-0 164. (MIRA 18:11) 1. Khirurgichaskoye otdolenlye (zav. G.A.Daniyelyan) Instituta rentgenc-radiologii I onkologii (direktor - chlen-korrespondent AMN SSSR prof. V.A.Fanardzhyan) AMN SSSR, Yerevan. IlLNIYELUN, G-K-&,.KIMRUSSXIT, V.I. Rultillnear conveyor in the cutting-out department of a shoo factory. Leg.prom. 16 no.9:43-46 S 156. (KLRA 9:11) 1. Glavnyy inzhener Bakinskoy obuynoy fabriki No. 1 imeni A.I. Mikoyana, (for-Daniyelyan) (Baku--Shoe industry) (Conveying machinery) p ABRAMOV, M.A.; ALIVIMDIZAM, K.S. -, AMIROV, Te.M.,' AR R.I.; ARSHNITRY, S.I.; BAGDASAROY, R.N.; BAGDASAROT, G.A.: BADAHTANM, A.A.; PANIT11- DZHAFAROY, A.A.; KAZ , A.B.; KERCHENSKIT, M.N.; 1rOffW--- KHOV, S.I.; KRA OBATIM, A.V.; KURKOVS11IY, A.I.; LALAZAROV, G.S.; LARI OV, Te.P.; LISMOARTIN, M.Te.; LIVSHITS. B.L.; LISIKTAN, K.A.; LOGINOVSKIT, V.I.; LTSMOVSKIT, P.S.; MCLCHANOV. G.V.; MAT- DELIMAN, N.M.; CKHONIKO, S.K.; ROKANIKHIN. V.A.; ROSIN. I.I.; RU- STAMOV, E.M.; SARKISOV, R.T.; SKRYPNIK, P.I.; SOBOLEV. N.A.; TARA- TUTA, R.N.; TVOROGOVA, L.M.; TER-GRIGORYAN, A.I.; USACHXV. V.I.; FAIN, B.P.; CHICHEROV, L.G.; SHAPIRO, Z.L.; SMCHUK, Tu.I.; TSUDIK, A.A,; AHUGOV, P,M,, red.; MARTTHOVA, M.P., vedushchiy red.; DANIY11- LTAN, A.A0; TRCEIKOV, A.V., tekhn.red. [Oil field equipment; in six volume] Neftianoe oboradovanie; v shesti tomakh. Koekva, Gos.nauchno-tekhn.izd-vo neft. i gorno- toplivnoi lit-ry. Vol-3. [Petroleum production equipment] Obo- rudovanie i instrument dlia dobychi nefti. 1960. 183 p. (MIRA 13:4) (Oil fields--Bquipment and supplies) DANIYILYAN, G.Te.. inshener. Dieconnecting charging and load currents with cut-aut switches. Zlek.Rta. 24 no.7:53-54 Jl 153. (KGRA 6:7) (Electric switchgear) NIKOLAUVA, N.V., inzhener; PAKYATNYKH, A.B., inzhener: MUSATOV. T.P., inzhener; KAKHHUROV, L.D., inzhener; DANYELIAN, G.N., inzhener: ' C IOFFS, E.Y., Inzhener; D.P., inzhener; MOSIKIN, V.S., inzhener. On the organization of service for district substations. Zlek. sta.25 no.2:36-42 F '5L@. (MLRA 7:2) 1. Azenergo (for Nikolayeva, Pamyatnykh and Makhmurov). 2. Donbassenergo (for 14usatov and Danyelian). 3. Mosenergo (for Klement 'Yev). 4. Gorenargo (for Ioffe, Gruzdev and Moo 'kin). (Electric substations) DAMYRU @,G.Y@e.,i=h. .1 .. Checking the conditions of contacts in air circuit breakers by meano of a meaouring rod, Elek.sta. 29 no.11:80-81 N 158. (MMA 11:12) Ollectric contactore-Testing) USSR / Forestry. Forest Management. K Abs Jour: Ref Zhur-Biols, No 7, 1958, 29540. Author : _p@ai eulyan, I. A Inst :-Not gDv-e-?r.--.:t@ Title : Forestry in the Armenian SSR. (Lesnoye khozyaystvo Armyanskoy SSR) Orig Pub: Lesn. kh-vo, 1957, No 9, 14-18. Abstract: No abstract. Card 1/1 DANITELTAN, L.A., starahiy doroshnyy manter (g. Kirovakan) Selflean act. Put' I put.khoz. no-10:39 0 '58- (MIRA 11:12) (Railroads--Safety Measures) DANIYELYAN, L.Ye. ... Motion of a viscous liquid in an open channel with an arbitrar-I porcus bottom. Is-v. AN Arm. SSR. Ser. fJz.-mat. nauk 18 no.l: 100-107 165. (MIRA 18:6) 1. Yerevanskiy gosudaretvennyy universitet. BARADZHANYANp G.Aq DANIYELYAN L.Ye. Flow of a viscous fluid in an open @oroils ch&mel, I if AN Am. SSR. Ser. fiz.-mat. nauk 16 no.3:83-90 163. (KIPA 16 t 8) 1. Yarpvanskiy gosudarstvennyy universitet. (Fluid mechanics) VT P-tva UTTOQ.o UT st@qjvocapu V.%TtC "O*ZtPTUU v J"o !a- puzu-13 in 400jil "MiVi.2 ya pus v 4@0 s A 40. &@ros Tul.202wx AMU 9 ov fopnia uvtrzpzw;l follo@ 0 ------------- 2UZ.19. 89 X=Gum "PIATPuT )q"lq uoq-m iIIUW stlo in facul OJO.T;:v ;o P" WSAT.PW TIO aqn. wftor"f, 4JV vs@fxv M.TJ -4odtq T uT uvTjwjnwjo j#AL-.rz su tl,. cc z-.Q;-Zzw@ ;. L;zT4 ;mm U"%T-t'4%T lpa=Al@ aaq -offil A PO OnP"d suzToov2 jo ur,T Tg"@O@ Tv>'.%-z0 aQT, V@ n. v pa=Tpl. .; 40 p @Ojjal vuptow- in 21 I.Q.;p 30 "a.oa@ 4q3 Wj SDVf6gZ "Sql jo fzTtTqvlftm 4,41, V"v P2,ltj Z, :p OT eepwo in sutsilstrumap puv 2'u;lrwg*p .3u;j.lgav 4U.L -g... d tPOTv-T&Auo* wroloalad %Pnz,.-tn *@pra, 4wor4j wctj pa@axozzj 6.44npwd oq 30 p- uo*4zpxvqz*-.y U; P.Ansallra V.pwo jo va"2 4uojejj,4%p in 0 ;Gctwuv tm wl."d tjolz"T104 ata IZ)YURAOO ow0voAaAv'D wn,jc@j4d jo gpoq"lm DOMMAPT %1@4SA VG,_%Z83u,33 @.@.Ul;" lotsati-.3uf OLP-P-02U9 Tworzaqo in *2vplpuv2 lapn-frTaw *N*m 19*.Uatas tva;w,=,L JO W%TVJV@MD "JASUZPT%Jo *K*l '2*-In JQ 4;Tpjp=0 'UV@3 rw *R,x Igaluvtn tvol@tw in lqu;uz-@l W*v lffa@ua;zv IVOTUUPS,l JO *39PIPUTZ 'VAcuv-@Cajng *t),j Tv.-.=L2tj3 in &3wplptm3 8@gznsvm -v.E-A $gj3us-.@S ,v@;uwa.L in *ivplpuvo zc- -h-V r"PlsqD in 40200a ..S@U:kno -G-A 104,u.;@G tt-l"43 jo IA4.ArTY *G*A , pimos jlrz-lo4jpz Wwaz,ly -a-.L :aoncu ?u;ttax-qrq jo -pa Couuxzjou 0^22javolulm :X@U-iv 2u;.Zosuodr vu-a;zTppj -pa-AulAd sojftz- ON -vwAj*uu% dTlu vz%.z4-a Imal.zj4@uWT ow" (a oox *"Jop, JO UOT. .0 T QD) 3 -d4A 'ACpr.Z2 )f;tLIOU -s&44%i.4Lnj -.% -A jusal -*Zjou -Anjj2 out wq 9ZWAOC MOLLYZIMM XOOq r Z-flid OOTI Translation- from: Referat:lvr,,vy zhurne4... Khlmiya, 19'59, Nr 8., p497 1'03R) AL'rHOPS- Kasumyan,.V.Ya.,.DAniya1yan, M.K,, Ant=@,va., K. 1_ Sultarova, Kh-!,?,-, Arus4'amov A,S. =2 _E.. The Preparation of Baku Petroleum far Pro.::o_,ssLng PMODICAL: Sb. tr. ikz,-rb n -1 191,;S, Nr 2, pp 16 - 33 (Azerb. summary) ABSTRACT: A comprehansive thervome,:tanioal ;rc:ass has dt%4elop@d for pre- paring Baku petrolfum for 'pro."issimg. Dimulsifl.1,ation is carrj@d r.A.At at a temperature of 110 - 1400C ard a pressure of uv to 6 atm., ard thA de3omDosition of emulsion is carried out in a mixer,, where the pre- limAn&T-fy heated patroleim is subje,::ted to Intans1ve mixing., The, separation of the principal mass of jir-ill watsr is @ax-ri4@d out in the first group of dehydrators. The stoorA mixer Is fod with vetrolzilm, oontaining 2 - 3% of water, and w%shing wa:tsT,. as a zeEult ol ir4gor-yur Card 1/2 mixing the.salts pass -into th,,% washing water. ThA seltlfllrg of the The Preparation of Baku Petroleum for Pror:esslng SOV/81 - 5 9 -8 - 2 8905 washing water is carried out in the se3ond sec:tions of the dehydrators, after which v the petroleum: is cooled and passes into the storage tank for the prepared petrolsum. - The metliod developed:fnakes it possible to reduce the consumption of demulsifier by 55 - 60%. N. Kel2tsev Card-2/2 s/(,65/63/000/001/001/005 E075/E436 kTjTjI0,?,i rtidytilcov, N.M. , .[)p Ilydrocarbons of the naphthaiene neries in naillitha .1nd gas oils from cataLyti-c cracking 1%ijililiya i telthl-jologip, topliv i m;tsel, no. 1 , 1963, 16- 1 () V, -.A \11o,I naphthalenes were isolated 1'rori naphtlia and light and ht@avy 17,;)s. oils from catalytic cracking to satisfy the inci-vc-ising industri.al deniand for phAhalic anhydride. The tiaphtha"Ient! hydrocarbons were isolated from aromatic portions of the oils separated on silica ge2 ind distilled to produce 100C cuts. '1kyInaphtiuxlenes in the cuts were s,.!pfxratcd via picrate formation. III(! llaphtha fraction.9 contained naphLhal.ene (0-59'1', of the original niphthu), @-utcthylnaphthalena (3.66'.,), 1,6-dimethy)IIaphthalene , 5'@) - The light gas oil fructiou4 coTitained dimethy).naphthal- i2-(;5@-)) and triiiiethy)iitliljtli~ti(!ii,!,~- (2.113@@). The heavy gas oil Iractlinis contained (3.3',.,), trimuthyl- and tet-c-,ititeA.Iiv)ii.Al?h'fhalene,,'3 0.12@;). T:, are 5 tables. @i-@,CCI TION: INKhII AN Azerb '-Ak (INK10' AS Azerb SSIZ) C',trd .0.1 I N;') Y U K ",V I N. M. I- DA N i YEL Y A N , M. K . Study of' rinplittinInnei from potrolnum raw mpitlirtal.. Xhi,-,I. prorn. 41 no.2!22-.24 F 165. 18-.4) Y DANWLYAN, N. A. Cand Ped Sci -- (dies) "Methods Of I" Studying Russian Diafects in the Non-Russian (Azerbaydzhanija and Armenian) Schools of Azerbaydzhan." Mos, 1957. 8 pp 22 cm. (Academy of @ 01 pu9j,44-4- Pedagogical Sciences RSFSH, Scientific Research In3t for-UU @ Tra-ining--Ma.tho(i4, 100 copies (KL, 26-57, 114) - 137 - 1. DANIY7ELYAN, N. T". 2. us@:z (6co) 4. Ammenia - Cak 7. :3pot seedinr oak in NortLern Aruallia. Le'3. kI.Oz. 6, ',:o. J, l';53. 9. Monthly List of Russian Accessions, Library of Congress, AmT ril 1953. Unclassified. PERSHIN, G.N.1 BEMKOV, G.P.; DANIYELYAN, N.M.) KATWITTIA, 11.1. Ar.tibacterial and antivIral effect of norm '.--ictonos snd lactame Zhur. mikrobiol.9 apid. i im=. 41 liu.3-Ir)--l-14 mr 164. (1 MI RA 1'7111 ) 1. Vsesoyu2nyy nauelmo-isaledovateltskly khimlko--farmatsevtichel3kly institut ineni ord2honikidze i Mantrallnyy nauohno-iseledwmtel'Sk@y dezinfektBio.nnyy institut. DAINTIYELYAF, E. G. Dr. Vet.Med. "PeUagra in Swine.." Veterinariya, No.1, 19-50 DAU@MTAH. S-G-vkftndeVet*naUk *,:,-,.-- Treating osteomalacia in cove with tricalcim. phosphat6e. Votorinarlia 35 no.12:51-53 D '58. (KIRA. 11:12) 1. Yerevanskiy zooveterinarnyy institut. (Osteomalacia) (Calcium phorphates) (Cattle--Diseases) KIRICWMO N. I., kand. goologo-mineralogicheakikh naukg lu--T, inzh.t MALYIJTKI?I, B. V., inzh.@. I I.. Deformation of characteristics of Chirkey limestones. Gidre stroi, 33 no.12tl8.-22 D 162. (MM 16:1) (Chirkey Hydroelectric Power Statiom.-Limeatone-Testing) DAN-1-TWTAM@-Armis Avakovich; YURMSKIY, S.V., prof. j' doktor takhn. nauk, red.; ALTM, T.B., red.izd-va [Studying the loading in repairing directional wells during hoisting operations] Iseledovanie nagrusok pri remonte naklon- nykh skvazhin; v protsesse spusko-pod"emnykh operateii. Baku, Azerbaidahanskoe gos.izd-vo neft. i nauchno-tokhn.lit-ry, 1959. 77 P. (MIRA 13:3) (Hoiating machinery) (Oil wells-Squipmant and supplies) ZYMITEV, G.B.; KILIKOT, M.N.; ASELAXOT. N.A.; IIAII=AIQS, A-At, Azerbaijan machine mnufacturers are facing now problems. Axerb. nefte khoz- 39;28-31 Ap 160. (HERA 13:11) (AzerbaiJan-Oll fields--Equipment and supplies) DAEYS,J., med.m. dr.; SIICUCAITE,O., doc.1 MUDGELIR'@E., D.; MILASAUSKIM:E, KATILIEVE, G.1 rABASBSKMI"E,G. _St.; CSTRAUSKME, S.; MT__Ii@0J5SMCrUTE,A.; The perspectives in further rheumatism control. Sveik. apsaug. 8 no.1202-35 D163. 1. Kauno Valst. inedicinos institutas. (rektorius - prof. Z..Tanuskievicius) ir Resgublikine Kauno klinine ligonine (vyr.gyd. - doe. P.Jasinskas). V. DANK "The brown coal basin of @Ieread-Szentl,al." P. 13 (4-OLDTANI K0ZU)'iY. j'JILIZTIN OF 7HF. HUNGARIM SIMY31CAL ST,,IE'rfp Vol. 83., no. 113, @an.tl,',ar. D53, i@udapest, Hungary) SO: II-Ionthly List of East European Accessions, L.C., Vol. 2 No. 71 J1IIY 1953P Uncl, DANK, V. Geologic results and economic outlook of deep-structure investigations of, the ar.ti- cline of Budafapuszta. P. 541. BANYA,9ZATI, IAPOK. (Magyar Banyastati as Kohaszati kgyesulet) Budapest, Hungary, Vol, 14, no* 81 Aug* 1959@ Monthly List of East European Accessions (EEAI) LC, Vol. 8, No. 11, November 1959, Uncl. qM=, -Sandor; KERTA31- Gyorgy, dr.kjL&gL,,ktorjr BENCZF., Laazlo; XASSAT, Iajos; JiUCSKO., Eva; GALUIBCS, Istvanj VAGY BIRO, Sandor; TOTH, Janosj IMDEkz Ede; TA.KACS, Pal, dr.1 SIPOS, Janos; BEF(ftZKY, Tamas; HAIMY,,. Jeno; KERESUES, Matyas., dr.j COPWIDES, Istvinj RATIA, Saroltal' - The 2d Hungarian Conference on Watural Gas. Ipari energia 3 no.10:225-231 0 .162. le Nehezipari mihiazter (for Czottner). 'AAK, Viktor, dr.- Outline of the deep geological atructure of the South Zala Basin. Foldt kozl 42 no.2:150-159 Ap-Je 162. DANK, Viktor, dr., okleveles goologus Geological structure of the new natural gas deposits in Hungary. Bany lap 95 no.11056-708 N 162. 1. Orssagos Koolaj- so Gazipari Troazt, Budapest. DZ'K. Vikto Dr. (Hungary); KDWCI, Ruza (translator] - @--r. I The subsurface and geologic relations of the southern part of the Great Hungarian Plain. Fafta jug 14 no.5/?2153-160 My-Jl'63- DAM, Viktor, dr. Natural gas explosions at Ullespuszta. Musz elat 18 no-15: 11 18 il 163.