SCIENTIFIC ABSTRACT N.A. FRANTASYEV - B.S. FRANTSEN

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP86-00513R000413610011-4
Release Decision: 
RIF
Original Classification: 
S
Document Page Count: 
100
Document Creation Date: 
November 2, 2016
Document Release Date: 
June 13, 2000
Sequence Number: 
11
Case Number: 
Publication Date: 
December 31, 1967
Content Type: 
SCIENTIFIC ABSTRACT
File: 
AttachmentSize
PDF icon CIA-RDP86-00513R000413610011-4.pdf3.11 MB
Body: 
L't,28969-66 ACC NR~ AP6019135 From the data it follows' thif the minimutd content of impurities is found in MgC12 B and D; hende, in supplying electrolyzers with MSGI B and D# i,the current'yLeld is the highest and the amount of Aime formed is fowesto It should bi noted that the main amount of impurities entering the.~ !electrolyzers with MgCla B ani 0 is contained in the magnesium which comes from the reduction apparatus. The greatest kmount of impurities is contained in carnallite and MgC12 .ShEP which results in the lowering the technological factors of electrolysis and increased slime formation. The conducted studLes indicated that all impurities wLth the exception of SO~2 are accumulated in the slime and the ma~neaLuu raw material during electrolysis (N.A. Frantas' yev, Jr., XAME,(Worke of the All-Union Aluminum and 6 6 _,_ Magnesium Institute), 19 3 No 504'*T t, aXe,nn4a (Nonferrous Metals), 1964, No 5)g impurity accumulati;n fh'thi- ;arictiblyte does no occur. The main change in impurity contentin the electrolyte occurs in the Jirst 15-30 minutes after pouring the raw material. Accumulation of impurities in the slime occurs with the simultaneous 'increase in -the content of magnesium in them. The content of Hg in the slim during the 81 Apply Of K9G12 B and D to the electrolyzers amounted to 5-7% (magnesium in the sample is 2-3% and screened magnesium is 3-4%). The main ;amount of magnesium settles in the slime after filling the bath with raw materi&4' As further atudies indicAted, the magnesium losses in the slime can be reduced ;only with thei- siguLf Leant reductLon of the anount of all LopurLtLes. enterLng jh 6 1., rz I S j Kiril*e K* and H, Vs La=ova participated n6t e Wor B;1,,6/aj,,C6 Me; ftblevo/ L6PRSIREF, JOB 1 10 07 1314 DATEt none RIG Uard Val 001 TTi )b hiw'r~mlZw4nke )1'z4LwFkz)/V-T1 idekc I lia a lit vs WV1 t,-.E- AP(019136 SOURCE CODE: UR/0136/65/oc)0/003/0060/00651 AUTHOR: Muzhzhavlev, K. D.t Lebedev, 0. A.: Fr antaa&v.,N. A.; 01yunin, G. V.; Dolgikh, T. K.: Sheka. T. S. ORG: none TITLE: Improvement in the technology of magnesium chloride electrolnisi SOURCE: Tsvetnyye metallyiAno. 3. 1965, 6U--U5-j_j TOPIC TAGS: electrolytel electrolysisp titaniump 4agnesium, chloridet furnacep magnesium ccmpound, chlorination ABSTRACT- . On the basis of 'the pil;t plant investigations conducted by the :authors in 1959-1960, a sodLum-potassium electrolyte composed of (%):8-18 MgC12, 60-30 NsCl, 20-50 KGI, 0-10 CaC12 or BaC12, was recommended for the lelectrolysis of M9C12 obtained from the production of titanium. In IS161-1963, at one magnesium plant, extensive resdarch of the sodium potassium electrolyte was cPP4440 at a group of experimental industrial -electrolyzers operated for 1-1.5 years after replacement of the lining before the beginning of the testa. For comparison, the sodium-calcium and potassium electrolytemi were tested simultaneously under comparable conditions. The clectrolyzera were fed molten MgC12 from titanium production con- taining (%): 95-99 MgCl 0.4 MgO, 0.004 SiO 29 0.007 Fe, d-' 0.02 C, 0.01 So 420 110.01 F , 0,'04.11 0, and 99-2 Mg metal. I The olimg from the electrolyzers was removed manually once in 7 days; 'the distance between electrodes was kept at 8-10 cmi fluorides were not introduced inio the electrolyz rm. The anode current density for all electroly-i, Izerawas identical - 0.43 &/cm In contrast to the earlier issued recommends- ;tions the electrolyte temperature was kept at 700-7200C.. UDr! AAQ.721- 4"; J. 5' F- F -.5 L 28970-66 ACC NN AP6019136 TO control the-true value of the current yield the electrolyzers were ,periodically (6-10 days) changed to a feed Of MgC12 obtained in electrical ahaf t f urna ces. Identically high and stable average current yield, approximating 90%, .wan obtained in the sodium-potassium and potassium electrolyzers, The ~current yield for the sodium-calcium electrolyti was 4-6% lower. The amount of slime in the potassium and sodium-potassium electrolytes .was identicAl (0.06 kg/mg Mg); in the sodium-calcium electrolyte, 70% more slime was obtained. Because of these factors-the actual electrical conductivity of the sodium-potaissium electrolyte is approximately 20% higher than the electrical conductivity of the sodium-calcium electrolyte with the same-amount of N&C1 in the electrolyte. The amount of magnesium raw material inthe main impurities, the losses of metallic: magnesium with the slime, the yield and concentration of chlorin*,! and the sUibility of the lining in the experimental industrial slactrolyxars were identical for all three electrolyte compositions. Relationship of current yield to the interelectrode distance showed in 'pilot-plant. electrolyzers of the All-Union Aluminum and Magnesium 4natitute that the change in distance between electrodes within the limits of ~3-16 cm does not at all affect current yield. In 1963, this relationship was'studied on an experimental industrial electrolyze.r. Wh-3n'the composition of the electrolyte was (in %): 8-12 MgC1 20 ~.22-24 NaCl, 63-56 KC1 and 3.0 CGC12- the current yield and the electric j, enq-iu-C)o ACC NR, AP6019136 power consijmption remained almost unchanged upon decreasing the interelectrode 0 distance from G-9 to 4-5 cm, but the current at the electrolyzer cell'in the second case was increased by 20% because of the additional current feed from 'the auxiliary generator and disconnection of one cell. The losses of chlorine with the gases of the cathode auction and its concentration in the anode gas remained unchanged., The amount of slime also remained unchanged. Relationship of current yield and slime content to the MgC1 concen- tration in the electrolyte was conducted on the pilot plant electroiyxer of !VAMI at 2000 amps. Gra!nulated M902 from titanium production containing (in %): 0.5-1.5 H20, 0.4-0.7 MgO was the raw material. MgCl2 was loaded into the electrolyzer~ continuously with the aid of a trough feeder. The variation in corrantration in a single period did not exteed 1%,.and the electrolyte level w kept .4-strictly constant, If -One 8, 4b e concentration oU take-- a's 0!~, the amount of slime when th MgC12 is 6%, then when the content of MgC1 in the electrolyte is 9. 13 and 2 .16%, this value is 118, 154, and 195% respectively. Lnereased MgC12 concen- trations in the electrolyte from 6-9 to 13% led to the increase of current ~.yield from 86 to 90%. It is evident that to obtain a high and stable current yield the MgC12 concentration in the electrolyte of industrial electrolyzers should not be ibelow 8-10% (the upper limit -- not over 18-20%) It is interesting to note that the MgC12 content change in the range ''of 6-16% in the electrolyte did not at all affect the value of the aversg~i Lcard 3/6 L 401 lu-00 ACC NRs APISD19136 ;voltage of the electrolyzer. The cause of this, evidently, is the fact that the reverse emE measured. iby the instantaneous cut-out of a ~~ll was 2.92 V at 6% MgC12 and 2.28 V at 116% M&C12. Relationship of the current yield and slime content to the duration of intervals between recoveries of slime at the VAM pilot plant electrolyzer showed that,the duration of interval between extractionct the slime was increased -to 142 days; thereupon the amount of slime amounted to 0.01 kgAg Mg in all. In 1961, in an experimental industrial electrolyser, the time of the -J-Ti-tervale between slime- removal was set at 40-50 days; the current yield was i85-87%. in 1963 this task was studied more in detail at two experimental :industrial electrolyzers. Froca the data obtained it follows that vhen feeding MgCl from titanium 2 .production to electrolyzers the slime content depends not so much an the amount :of raw material, composition of the electrolyte a!$ design of the electrolynic .as on the conditions for slime recovery. Testing of an electrolyzer with a graphitj hearth with MgC12 feed from M-o-t-p-Tint scale for 4 months. the titanium production was conducted on pi The total current at the electrolyzer was 2000 amps; ~ha current shunted to the hearth -- 100-200 smos (D a 0.03-0.06 amps/cm With a disconnected hearth, the current yield and slime formation were the same an Ja the pilot plant electrolyzer with an ordinary hearth. During anode polarization of,the graphite hearth, the slime completely I Card 4/6 u, T, -'i ACC NR, AP6o19136 disappeared in 2-3 days; during operation with a connected hearth no slime was formed. However, both inthe first and also in the second case the current yield was reduced from 88-91 tp 80-05%, i.e., by 5-8%. This can be explained by the chlorination of impurities and their harmful effect on the process. .Research in this area will be continued. Of much interest in remo ing the ,harmful effect of impurities in the use of chlorine discharging anodes with which all or part of-the chlorine is carried off through the body of the an6de, Such,experiments are being conducted at the present time. . : i With the further mastery of the sodLum-potassium electrolyte, increase of NaC1 in it, and the introduction into industry of the operating regimes :at small distances (4-5 mm) between electrodes, these indicators in the opinion of the authors, can amount to 88-90% and 50.4-52.2 megajoules/kg of Mg (14.0-14.5 kilowatt-hoursAg of Mg) respectively, when the currentis 20-30% higher than at the present. The tests on experimental industrial electrolyzers, as well as the ,physical and chemical properties of the sodLum-potassium electrolyte which :are favorable to the electrolytic process and the high quality Of MgC12 from Lthe production of titanium, can serve to conform this. The-selection of the actual ratio of NaCl:KCI in the electrolyte depends on the technical scheme of the plant and level of mechanization of slime irecovery processes. As the calculation of economic effectiveness indicates, 'the use o~ the sodium-potassium electrolyte in place of the sodium-calcium one Ipermits a reduction of approximately 5% in the cost of magnesium. L 28970-6~ ACC NRt A.PW19136 Additionally, the use of this electrolyte permits the mechanisation of the slime recovery with the aid of a vacuum. With sodium-calcium or sodium- ~barLum electrolytes this means of slime recovery is hardly applicable because ,of the large 108866 Of QC12 or BQC12. The oodium-potansium electrolyte should - .be recommended for use, in turn, for high quality MgC12- However, in the future .this electrolyte composition way be quite practical for all forms of.MSC12- Orig. art& haal 5 tables. IJPRS1 SUB CODE-0 13#~ 07 SUBH DATE: none ORIG REF: 006 ~�rd 6/6 131-G- I j.TLf 7MHAVIEV, K.D.; LEREDEV, O.A.; FRANTASIUN N.A.; OLYUNIN, G.V.- I- p _--Pr-'rimali uchastiye: POPOV, V.V.; SHEKA. T.O.; DOLGIM, T.K.; i d SHEKA, V.P. Results of testing individual design elements of magnesium electroly-tic calls. TSvet. met. 38 no-5:57-60 My 165. OKIRA 18;6) - . . w w . . w It . . W w w w v w w w w . w 0 w 6 w 6 4 * * w w w w . v a ~ III w c w w v w w -T-- - wto go a *a** so a******** *14 "wo-6-04 4p0 so 0 X I, it A, L L AA M H r V1 00 so .4 h...41. SIM 04l% imills Imurtlelcitil 11.1tilloriqI I( 1I.A., %I I lee it ~+, Mid L. I't-LA" CAKI"k-11"11 11111 AA' 6-11 1 , l j 1 'J h k U 1 ; -00 - 1.1 - e ol,ift t" t A i ti 1, 1 ~i, . l k, 17. ='l 4M 19AL); Ch- lettIl. 1044. 11. 1 liw',- - I. rrecirding at-tr. -EXIdS. wirFeCATTied(mit 'M Allf"1910'r-It. iro-wing Wr4,y, wid mis (I) dtt. the cfftct III Iliv pritivili.&I lose iitA with 0multaneftiod hornumizAtim will% meitw-' l , (11,paul f1wim". (fmis ;Wegimist "'.') kml -f 0: vittwite hvi,-mimm. 1 .64). C ..... I-i I awl plitit'. 111C rmill, "a, Ih,' -11 00 111clit. 1111fifittil" %howkil till advaillap. I'vi-I 1114, IIIII]f 0 M. C.. NI-e ' 0 00 0 adl 0 '100 0i a A t A of I ILL LROK At Li ft. A7, 0 &SWI(Al ION too too k 1991 'IN KMn ji"jMIJA Joe I W a I 0 0 0:0 so 0o0 o o **so GIs 0 0 Gas 000006 0 00 FRAINVEK, VLADIMIR Analyticka chemie kwantitativni vazkova a odmerna. LVYd- 1..7 Fr~aha, Statni pedaeogicke nakl., 1953. 161 p. (Ucebni teyty vysokych skol) ZGravimetric and volumetric quantitative analytie chemistrY7 East European Vol. 3, No. 3 4 SO: Month List of A444UWAccessionsl Library of Congress, March 19534, Uncl. CZECI1OSLOVAICUj,/I.-'unan and Aninal PhysioloG7. - Nervous System. T-10 11i6her Nervous Activity. Behavior. Abs Jour Ref Zhur - Biol., No 7, 1958, 32230 Authcr Inst Title Development of Valuable Motor Conditioned Reflexes and- Their Use for the Study of the Action of Trichlorethylene on the Higher Nervous Activity of Rats. Orig Pub Pracovni lekar., 1957, 9, No 4., 314-317- Abstract No abstract. Card 1/1 - 147 - HORVATH, Effect-of I-glutamine on the central nervous system. I. Effect on the higher nervous activity. Cesk. fYsiol. 7 no-5:474-475 Sept 58. 1. Ustav hygieny prace a chorob z povolani, oddeleni fyidologie vyBsi nervove cinnosti. Praha. (CENTRAL n.'IVOUS SYSM, phyeiol. higher nerv. activity, eff. of glutami-ie ((;z)) (GWTAMINE, effects, on higher nerv. activity (Cz)) HORVATH, P1. Physiological basis of hygienic standards. 1. General principles. Cook. hyg. 6 no.9029-530 0 161. 1. Ustav higieny prace a.chorob z pavolani, Praha. (DIDUSTRIAL MEDICINE) . FRANTIK, E.; HORVATH, M. Studies on higher nervous activity in applied research Vith special reference to hygiene. Activ. nerv. sup. 4 no.2:180-181 162. 1. Ustav bygieny prace a chorob z povolani, Praha. (CENTRAL NERVOUS SYSTEM pbysiol) (HYGIENE) (RESEARCH) HORVATH,M.; FRANTIK.,E. Use of automatic technics in th~ study of higher nervous func- tions. Activ. nerv. sup. 6 no-DI15-116 164 FRPLNTIK, E.; KHORVAT, M. [florvat, M.) Elements of automation in the technique of research in higher nervous activity. Zhur. vys. nerv. deiat. 14 no. 2:358-363 Mr-Ap 164. (MIRA 17:6) 1. Department of Physiology of Higher Nervous Activity, Institute of Labor and Occupational Diseases, Prague, Czechoslovakia. I-C -eva 10, fierv~)Ilf; q I ivi, - 14-. ~l n1'. 01, r1 o . 17 twil V I U~t;jv hyj~ll '!T:7 Prrfc-,:~ a 1)ov~ Ze I'C-dl P"Of. d'. V. FRANTfK. M.. 183 Dr. Czechoslovakia Hos ital of Children's Tuberculosis -- Lu6ivnd RiebebAa detskej the -- Lubivnd); Director: R. ~IMIM, TO Dr; Second Internal Medicine Ward (II. inteind oddelenie); Ohief; id. FRANTIK7 M'U D r. Prague, 1(ozhledy v tuber1ml6sep No 10, 1962, i-p 720- 722 "Atelektasias and Postatelectatic ScleroEes of the Pectoral Segment in Frimarj Lung Tuberculosis." k1ull'TY No degree indicated C7.fCi1UjLkjVAX1A Sanat_-rium of Child Tuberculosib (Liecebna detskej tbc), Lucivna; Director: Dr. R. SIMEK; Prague, Rozhledy v tuberkulose a v nemocech plicnich, No 9, Oct 62, pp 668-674 "Larly Results of Long Term Institutional Treatment of Pulmonary Tuberculosis in Children.1% Go-author: FOHANKA) F., no degree indicated; Sanatorium for Tuberculosis in Children (Detska liecobna tbc), Dolny 6mokovec; Director: Dr. J. SPURA a --1 FRANTIK9 M. Gai, ~ji ova tU L Czechoslovakia MD; Chairman, Second Intern Section (II. int. odd.) Children's Tuberculosis Institute (Liecebna dotskej tbc), Lucivna; Director: R. SIMEK$ MD Prague, Rozhledy v tuberkulose a v nemocech Dlicnich, No 81 Sep 62, PP 586-590. "Early Results of Pcolonged Institutional Treatment of Pulmonary Tuberculosis in Children. 1. Source of Infection, Social Condi- tions and Calmettization". Co-author: POHANKA, P,, Children's Tuberculosis Institute (Detska liecebna tbc), Dolny Smokovec; Director: J. SPURA, MD; Chairman of First Intern Section (I. int. odd.): R.NEUMANN, Doe. Dr. FRALTIK, M. Czechoslovakia MD; Chairman, Second Intern Section (II* int. odd.) Children's Tuberculosis Institute (Liecebna detskej tbe), Lucivna; Director: R. SIMEK, MID Prague, Rozhledy v tuberkulose a v nemocech plicnic , No 8, Sep 62, Pp 586-590. "Early Results of Prolonged Institutional Treatment of Pulmonary Tuberculosis in Children. I. Source of Infection, Social Condi- tions and Calmettization". Co-author: FOHANKA, P., Children's Tuberculosis Institute (Detska liecebna -Mc-), Dolny Smokovec; Director: J, SFURA, MD; Chairman of First Intern Section (I* int. odd.): R.NEUM M , Doe. Dr. Tt~~TIK, M. 1 -9mly, YO [ He~my, j. Inactivation of isn-nicot-inic.- acid hydrazide in clIll."irm., Probl. tu"43rk. 41 n. 2%%-64V~4 Or"1131, 17-.2) 1, 17, TnotLtuta terapii P.Shirml (SlmcArlp 11.1) 1 Institl.ita tf,,rav,)H tubarkulozn Vy.31myY0 Gagj (di.r. J.Balaz), Chok~4elmral,~iy-. FISCE3R, R.;FORMINEK, J.;FWTIKOVA, D.;HORVATH, M. Changes of oritioal blinking frequency during the course of a workday in telephone operators. Cask. fysiol. 9 no.1:12-13 Ja 60. 1. Vyzkumny ustav epoju. Ustav hygieny prace a chorob z povolani, Praha. (FATION) HORVATH, M.; FISCHERP R,; FOEMANEK, Jo; FRANTIKOVA, D.; NIKISKA, A. The strain on higher nervous activity in mechanized and automatized work and the P06aibility of Its examination. Preoovni lek. 13,no.41 163-168 My 161. 1. Ustav bygieny prace a chorob z povolani, Praha; Vyzkumn;r ustav spoju, Praha. (INDUSTRIAL MEDICINE) (CENTRAL NERVOUS SYSTEM pbvoiol) ~ .: I Y~ , , - -n ~~ 1 - ~ 11 ~ C11-111, ~ ;1'~,-'--i,11- ~-s .. - - ~ 1 .11 FORMANEK, J.; FISCHER) R.; FRANTIKOVA D. The frequency of neurotic signs in female telephone and key p1mch opemtors. Activ. nerv. SUP. 3 no-4:4-U-424 161. 1. Vyzku=W ustav spoju, Praha (red. int. F. Bozek) Ustay b7glerT praos a chorob z povolani, Praba (red. prof. J. Teisinger) (OCCUPATIONS AND PROFESSIONS) (NEUROSES statist) t0IMAHM, J.; FISCHER, R.; FRANTIKOVA. - D..,-,- The critical flicker fusion frequency and the frequency of neurotic manifestations in variouB occupations. Activ. nerv. SuP. 4 no.2: 183-184 162. * 1. V~zkumny uotav spoju, Praha, Ustav hygieny pmee a chorob z povolani, Praba. (TUCER FUSION) (MROAS statist) (OCCUPATIONS AD PROMSIONS) FRANTIKOVA, D. Determination of the olfaotor7 threshold to industrial poisons. Activ. nerv. sup. 4 no.2.184-185 162. 1. Ustav bygiany prace a chorob z povolani, Praha. (POISONS) (MMI) (AIR POLLUTION) P_ (3 lvsriz~uc f ork 1 1 ~Tl V.r.(J OCC~IrtlZioilill DiStulses (UStav hygiony I-race a chorob z low'.'arli) L(u.'-i (pC('Jjv.)SLa) W: Irrof J. T*j'~T!:Gj-','-', J)ZSC; all 0_ U JC ti d C r-a n a c) r. ,3 Institute, (Vvzkumn,,,, ustiv sroju), Chief (red"tel) -~'iz F. "n Long-Distance Telernone Orcrators. D 41/ Le'l-, stvi, Vol 11b, :o 10, cc '16962; ;-, '1-476. lComl-rehensive review of the vorld -l". the LC1,1c: -Zoneriess to neurotic !ability, senscry (csF. audizory) autonornic-endocrine disturbances. A-ithors found nei;ative res,31ts In llaited studies on blood preswire and slein t ci, I ~~ ri t 1 j r ~ n c~ a r, (r.,. ,,, n ~ :5 .They find no Justification for considering as 11CCUlational and cc-mi-ensible, but auditory changes are such, hw,,evev, t!-.~uy Are nostly ninor in degree. The rroblems Fersisc, ho,.:-ver, Pad remedial measures are outlined. The present 6,OOC Czechosl. orr~.-ntors ~,ill nct decrease in number until 1965; from then an Auto= -nat,on wi:1 affkct thw- to 1,100 in 1980. About 40 ~,,orldwida ref's. t FISCHER, R.; FRANTIKOVA, D.; FOMIANEK, J. Health problems of long-distance telephone operators. Prac. lek. 14 no.10:471-476 D 162. 1. Ustav hygieny prace a chorob z povolani v Praze, reditel prof. dr. J. Teisinger, DrSc. Vyzkumny ustav spoju v Praze, reditel inz. F. Bozek. (OCCUPATIONS AND PROFESSIONS) 5(l) SOV/64-59-3-7/24 AUTHORSs Zabotin, K. P., Morozov, L. A., Kryukov, I. V. I F_rantiulkiy, _.L.A,. TITLEs Experiment With a Continuous Polymerization of Methylacrylate in Emul" ion (Opyt nepreryvnoy polimerizatsii metilakrilata v emullaii) PERIODICI.Li Khimicheskaya promyshlennost', 1959, Ur 3, pp 3o - 31 (USSR) ABSTRACTt Despite of the advantages of a tube reactor for the continuous polymerization (PS) of methylacrylate (I) it was not used in this case, as (P) starts at 720 with the applied initiator (ammonium persulfate), and is followed by an intensive develop- ment of gas. k somewhat different system with a cylindric re- actor was used which served the purpose of PVC polymerization Ref 1) (Fig - scheme of the system). For the (P) technical -was used with about 93~ (I), 0.2~,of acid and 0.1-0.2% M of hydroquinone. The latter was separated before the (P) by means of a 5% NaOH solution. "Necal" and sulphanolb served as emulgators. The composition of the reaction compound is given. The polymerization degree of the received product amounted to about 500. Data concerning the viscosity, respectively the (Mw) are also given . It is stated that speed and the (P) Card 1/2 degree are lower in the continuous (P) than in the periodical Experiment With a Continuous Polymerization of SOV/64-59-3-7/24 Methylacrylate in Emulsion (P). Data are given of a (P) of (I) according to the con- tinuous method under the application of sulphanoles and various amounts of ammonium sulfate, as well as a (P) of (I) with 0.002% of hydroquinone. The latter showed that the M of the polymer is increased by a reduction of the hydroquinone content. There are 1 figure and 1 reference. Card 2/2 M o6214 50) BOY/64-59-6-6/28 AUTHORS; Zabotin, K. P., Morozoi, L. A., Kryukov, I. V.,. Frantinakiy, K. A., Golubev, A. k. TITLEt Continuous Method of the Copolymerization of Butyl Acrylate With Acrylonitrile in Emulsions PERIODICAL; Khiinicheakaya promyshlennost', 1959, Nr.6, PP 486 - 487 (USSR) ABSTRAM The product obtained by the copolymerization mentioned in the title is used in the manufacture of artificial leather, in leather dyeing, eta. Publications mention a semi-continuous method (Ref 1) for this polymerization. Here, a continuous method is described, which has already been proposed for the copolymerization :of divinyl with styrene (Ref 2). From the ocheme given (Fig ) it is seen that a tube reactor is used. The following composition in parts by weight is used as reaction mixturet butyl acrylate: 54, "sulfonol" (emulsifier)% 2,ammonium persulfate (as initiator): 0.1, acrylonitrilet 16, watert 100. The reaction mixture was introduced into the reactor at a rate of 1.2 1/h and 1.8 1/h respectively, and the copolymeriza- Card 1/2 tion was carried out at approximately 80 In order to prevent 06214 Continuous Method of the Copolymerization of Butyl SOV/64-~,9-6-6/28 Acrylate With Acrylonitrile in Emulsions coagulation of the finished latex 4-7~o of ethylene glycol was added. There are 1 figure and 2 references. Card 2/2 F,-,~~: *TT7, J. Treining newdrivers in basic orranizations. p. 583 (Svet Motorti. Vol. -11., no. 19, Sept. 1~),57. PrPha, Czec'-oslovnkia) Monthly Index of av-ast European Accessions ( E7--',!) 1-C. Vol. 7, nc. 2, February 1958 VINCENT, Gustav, Inz. dr.; FER, Frantisek, inz. Hybrids of the European and Japanese larch on the experiment plot of the Litovel Forest Enterprise. Les cas 11 no.4:367- 378 Ap 165. 1. Faculty of Forestry of the Higher School of Agric%~il~ure, Brno (for Vincent). 2. Scient'fic Institute of Forestry ..f' tile Higher School of Agriculture, Kostelec nad Cernyml Lesy (for Fer). Submitted March 26, 1964. a Q 'k FRANTISIM-K, Lenolch CFJUTTI~FK, L], prof. Some problems in trenting mente rheumntism. Yop.okh.mnt, i det, 3 noe3:45-50 JI-Agg 158 (MIn 11:8) (RUMATIC FrVFR) FRANTISIOW, Ivan Moisoyevich; HOZANOV) M.D., red.; PHESN'OVA, V.A.9 I'Crane builders of Leningrad; the past and preBent of the Kix3v hoisting and conveying equipment plant in Leningrad, 1853-1961]leningradakie kranostroiteli; o proshlon i na- atroiashchem. leningradskogo zavoda pod"ecno-transportnogo coborudovaniia. imeni S.K.K:Lrova, 1953-1961. Leningrad, Len- izdat, 1962. 350 P. (MIRA 15:9) (Leningrad-Labor and laboring classes) (Cranes, derricks, otc,) FRANTIU, 1, Specific platina consumption in our production of thin, steel plates. Metallura and Machine Construction, /13:9:Mar. 55 ;'Wim 4A 'a V V 1S FRAVTIU, I. Systematization of specific consumption of steel for profile and half-finished pro- ducts rolling mills. p. 47. METALURGIA SI CONSTRUCTIA DE MASM. (YAni3terul Industr1ei Metalurgice sl ConstructUlor de Madni 91 Asoclatia StUnifica a Inginerilor A T chniclejor) Bucuresti. Vol. 7. no. 11. Wov. 1955. SOURCE: E"t European Aces9ions List, (EVAI), Library Of Congress, Vol. 5. No. 11, Novembero 1956. R., M-'174111IG I Increased service period of mill rolls. p. 7. TENNICA NCUA. (Asociatia StUntifica a Inginerilor si Tehnicianilor) Bucuresti. Vol. 2, no. 25, Nov. 1955. So. East European Accessions List Vol. 5, No. 9 September, 1956 FRANTRI,-L- Problems and achievements in the process of rerfecting the Production of steel roMng m3l.1s. p. 51. METALURGIA SI CONSTRUCTIA DE MIASINI Vol. 8, no. 1, Jan. 1956 Rumania Source: EAST EUROFEAN LISTS Vol. 5, no. 10 Oct. 1956 FR ART-TU,-J . 4~pplication of certain formulas for testing specific expenditures of steel in the rroduction of rollIng mi I Is for Profiled Iron and semifinished products. p. 63. M41TURGIA 31 CONS~-RUCTTA DE MASM Vol. 8, no. 3, Mar. 1956 Rumahia Source: UST EUROFEAN LISTS Vol. 5, no. 1C Oct. 1956 ~-14 1~ vlvl- k-;,- F. FRANTIU, I. FRANTIU2 1. Problems of some rolling mills in Czechoslovakia. p. 74. Vol. 8. no. 10, Oct. 1956 METALURGIA SI CONSTRUCTIA. DE MASINI. TECHNOLOGY RUMANIA So: East European Accession, Vol. 6. No. 5. May 1957 IN FRPMnI, 1. Assortments in the production of laminated sheet metal steel. p. 76. (W-TALURGIt SI CONSTRUCTD. DE MASINI. Vol. 9, no. 6, June 1957, Rumania) SO: 'Month1j, List of Best Europen Accessions W. Vol. 6) No. 12, Dea. 1957 Uncl. FRANTIU., I. Criteria for the classification of hotleminated steel profiles. p. 385. (STANDARIZtIT,,A. Vol. 9, no. 8, Aug. 1957, Rumania) SO: Monthly List of East European Accessions (EEAL) w. vol. 6, no. 12, Dec. 1957 Uncl. T.,-~ . ... - ..- Det-l-IJInOtict, ond pn-cMc,31 Cftlci:lation of! t~,e r_Conorly of ir rr:-c~uctirn rl' Si C(ristructia De losini. v01. tic, . ~3- t 1'- -;7 Pucu.rcs + LUM, a n ila I-ont6h, Index cf Lc;st 1"1,1 1,coe!-,T,. Acce Z3 C. V 7 23 Februel, 1~ o,.' drCicienci~):7~ cl' in,-ot:,-, la-idnatod pruduct-,, arA drawn- s~cel 7,rodlicts. P. 136. 5T.IJPJ.~I,DI'7A 1,omiqiunea cle Stamdanlizaro. ::ucure-,ti, luruinia Vol. 11, no. 3, Mar. 1959 Monthly List o..' Eant I~uropoan (ZIEAI) L,", vol, no. FAIA. 19'~)9 Uncl. 7_7 711,:7, -T R/009/60/000/004/0021/002 A124/AO26 AWHOR,. -Franl4u,joan, Engineer T IrME New Achievements in the Field cf Steei Rolling Mi.111 ~j PERIODICAL3 Metalurgia ;I Construotia de Magini, 14;, 14,. 4, pA P. 327 - 330 TEXTa The author briefly reviews a few modern Installaticns used in roll- ing mills, which helped to increase the production capacity. A 850/700/500 con- tinuous rolling mill was put Into operation in the USSR in 1958. In order to connect the continuous casting of steel with the rolling of finished products, a new principle based on the utilization of the universal planetary rolling mill (Tselikov - Nosal System) was recommended In the USSR. Large blooming-slabbing mills, with rolls ranging from 1,250 - 1,300 mm in diameter Eire being planned In the USSR. Special attention is paid to the reconstruction and replacing opera- tions, as well as to new working methods. The 1,150 blooming m111 of the "Dzer- zhinskly" Plant in the USSR employs simultaneous rolling of two ingots., The USSR emphasize the corstruction of continuous rolling mills for broad S-.rips (1,700 - 2,,10') mm) and of cold-rolling mills for narrow strips (1.8 - 4 mm). Tbe. plans of a continuous rolling mill for th6 rolling of thin-walled shapes were Card 1/,2 Y'. R/009/60/000//OOIL/002/002 New Achievements in the Field of Steel Rolling Mills Al,24/Ao26 worked out recently. A semiproduct butt-welding installation allowed the con- struction of a Soviet wire rolling mill. having a rolling speed of 60 n/iec. The Central Institute of &~ientlfic Researc-h of the Soviet Minis-try of Mechanical En- gineering developed a. wire cold rolling mill, with a final wire diameter of 1.5 - 2 mm. For the production of welded tubes of small diam6ter and thin walls, the Soviet Union will construct. tube rolling m1113 with a productisn 4peed of 7 m/see and more. Another type rolling mill for, t'6,, prcducticn of welded 'rubes up to 250,00C, tons Per YeaT will be acr_,-.~mplished by combining a planetary rollirg mill with a tube welding Lnstallation and a reducing unit, at w1nich the tubes will be welded at a ep"-d c.-f 2 m/sec. The cutput of this ~ombinEad Installation will be 12 m/sec. An experimental- planetary rolling mill for the prcduc-tIcn of seamless tubes is already In operation in Msscow (Ref. 1), The US3R al~-~o built an experimental rolling mill for cold rolling of 25 - 40 = tutes, by using 10 individually driven rolling stands. Various Improvements ~:an be achieved by ap- plying an advanced ms~_hanization clonnected with. an automa'~Ic ~-_-,ntrol c,f diffemnt operation phases. Brief reference is made to the mainterLan--e and exploitation of rolling mills. -The continuous Increase of th~, rcllinz 5pesd :tni ilie dem-nd for better qualities led to the conct.ru,-ion of devi,~es whi,-h mpa-sure and check the geow. trical dimenzion2 even auring fhe r,,,'-',I.ng Such an apparqtus Card R/X9/6r, /0 00/00 4 /0 02-100 2 New Achievements In the Field of Steel. Rolling Mille A124/AO26 was developed by the Central Laboratory of Automation in Moscow. This photoslec- tric apparatus measures the diameter and ovalltY rf 5 - 12 mm wires during h,~ rolling process at a rolling speed of 10 m-seo with a Maximum error of I - 1.5%, The quality of the rolled goods was aisc Improved ty var1cj5 new meth-~ds. The USSR improved the quality of tran3-former sheets by using a va,~uu:m treatment cf the steel. There are 31 references4 13 Scvlt!t; 11. r~erman and 3 English. Card 3/3 R/009/60/000/010/002/009 A1257AI26 A'UTHOR% Fran?iu, loan, Engineer TITLEt A simplified calculation for the quantity of scale formed when heating-carbon-steel PERIODICAL: Metalurgia pi Constructia de 11apini, no. 10, 1960, 865 - 867 TEXTs The authors presents a simple formula for the calculation of the scale quantity produced in the heating of carbon-steel. The general formula expressing the quantity of scale is: -b A - aYF7- eT , in g/cM2 in which a and b are the conotants; t the duration of the hbating, min; T - the heating-temperature, OK; and e the base of natural logarithms 2-718- Since this formula does not correspond to the practical require- ments, the following formula is recommendedt A = a - , kg/m2, T Tyt (3), Card 1/3 R/009/60/000/010/002/009 A simplified calculation for the... A125/A126 in which aT is the scale formed within one hour at a temperature of T 00; AT - the scale formed in t hours; and t - the number of hours. In a grad- ual heating, the temperature increases from 200C to the maximum, and the steel oxidizes in zones of different temperatures. The scale formed in a previous zone influences its formation in the following zones. For this purpose the scale production is calculated separately for every zone, de- signated with AT1, AT2... etc. A calculation example is given in Table 2. This method can-be simplified by-calculating the scale quantity until the piece leaves the second zone, computed by using the t2 + t1r maintainance timei ..+-(AT1)2 (aTl-)2tl, AT1-2 ~ aT2 V7,~tjr~ aTVi2 aT2 -1,Vt2 + aT2 ATI-2 t2(aT,)2 + tj(aTj )2. This relation for two heating zones can be generalized for n zones: AT1-n -Ytj(aTj)Z + t2(aT2)4 + "' tn (a Tn)4' (4)- Card 2/3 A simplified calculation for the... R/009/60/000/0-,0/002/009 A125/A126 The results obtained with '(4) are practically the same'as those calculated by the successive operation with partial formulae. This general formula re- quires only half as many operations than the convential formula. There are 3 tables and 2 referencest 1 Soviet-bloc and 1 non-Boviet-blac. Table 2. Example for _PnA_ I T_- 1 t, + '(,-I) on 'r. calculating the scale 1 0.25 11 -0.3 Ar, 0.25 YF.3 - 0.14 quantity 2 is- 11, - 0,3 r 0,43 A, - - 0,4 1W,11 - 0.24 0.4 ,_. 21 ~ 3 O.H5 I& + 0.5 + . -0.66, .1 r - 0.65 VFJGG - 11.53 0.65 , + 0,0 11.83 A, , 2 1 0.6 + Y A, -1.0 VF,'8-7, LFIS 2 . 3,2 0.3 -P ( A:, -3.,_ Y;-,7.., 2.5'6 Card 3/3 3.3 1-6 R/009/60/000/0 I I 005/0W A231/A126 AUTHOR: Fran~iu, Ioan, Engineer TITLEt The problem of high-quality thin sheets V/ PERIODICALt Metalurgia 91 Construo;1a do Magini, no. 11, 1960, 1,001 - 1,008 TEM.- The field of application for high-quality thin sheets made of soft steel is continuously growing. The tendency in general processing is directed to- wards plastic deformation, preferably by cold dishing. Rumanian plants produce various assortments of sheets, characterizee. in STAS 1988-59, which includes: TD pickled sheets and TDA pickled sheets for canventional dishing. The chemical com- position and mechanical properties of the STAS 1988-59 sheets are compared with GOST 914-56 and DIN 1623 (1959) sheets in Tables 2 and 3. Two Rumanian plants are equipped with non-automatic rolling mills which are processing sheet billets. At the third plant, rolling mills for the processing of sheet billets were installed during the last few years. Rumanian plants can apply only cold rolling. Two roll- ing mills additionally use straightening and polishing (a 0.5 - 1% cold reductio4 Annealing of sheets is accomplished in tunnel furnaces fueled with gas or mazout. Electric furnaces are used in one of the plants. The above-mentioned facts limit Card 1/7 R/009/60/000/0 11/005/007 The problem of high-quality thin sheets A231/A126 the quality of STAS 1988-59 sheets to use In conventional dishing (TDA). The Ru- manian-made thin sheets have the following deficienciesi 1) uneven surface be- cause of adherent scale or scale traces; 2) distortions, grove-shaped distortjow; 3) non-unifirm thickness; 4) varying carbon content; 5) non-corresponding me- chanical and technological characteristics; 6) neglection of the Erichsen index and sheets non-corresponding for dishing processes; 7) aging of the sheets and appearance of flow linesi 8) appearance of blisters; 9) stratifications and pip- ing traces; 10) mixture of dimensions and materials; and 10) limited number of assortments and insufficient quantity of every assortment. The author gives some advice for the avoidance of these deficiencies. The STAS 1988-59 s4eets do not satisfy all demands with regard to surface quality and mechanical and technologi- cal properties of thin sheets made of soft steel. The quality of TDA sheets can be Improved even at the existing installations. For the production of sheets having a higher quality than the TDA sheets, additional equipment such as revers- ible cold rolling trains and improved annealing furnaces should be Installed. A compr6hensive improvement will be achieved by putting modern sheet rolling mills into operation at the new Siderurgical Combine which will be constructed in the Galati Region.. There are 6 tables, 1 figure and 7 Soviet-bloc references. Card 2/7 FRfiYjTIU, Ion, ing. Valorization of some operation data on the annealing of thin stuel plates. Metalurgia constr mas 13 no. 4: 279-282 Ap 161. FRANTIU, Ioan Ultrasonic welding. Metalurgia conatr mas 14 no.10;940-943 0 162. FROTIT" !,2n,. inq,; LOZICTU, ',nrtIn, ing. ; JjAl U, Ficolaie, ing.; IPIAS, V., colsborntnr- ing, . -, .-~ , t,,, col-nhora+nr; DCTICI, D., lng,, C laborator O.L Some problems related to the quality of siliceous plates. Metalurpia constr mas 14 no.1:31-35 Ja 162. 1. Institutul de cercetari metalurgice (for Frantiuj Loziciu and Laiu) 2. UzIna de masini electrice "Dinamo," Bucuresti (for Iamas and Chivaran). 3. Institutul de cercetari electrotehnice (for Donici). ?I~IU, Ion, ing. Direct and rapid measurement of iron losses from narrow bando made of transformer and dynamo silicon steel. Heta-lurgia constr mas 14 no.12:1088-1091 D 162. 1. Institurl de cercetari metalurgice. , _ _31 -,' - T ~ ;7.-- !1: !:'- .- eX' : - -'- ' : . I FRANTIU, Ion, ing. Studies in order to improve pickled shoot for tinning. Metalurgia constr man 14 noe6:48(>-493 JTe 162o 1, Institutul do cercetari metalurgice. FRA.NTIU, Ion, ing.ICUIDA, Oleg, ing.; UJUP Nicolao, ing.; ILZICiij, Martin,ing. Economic and technical aspects of the manufactixe and technical aspects of the mnnufacture and utilization of Plated steel rolled goods. Metalurgia Rum 15 no.4:312-316 Ap 163. FRANTIU I.., #g- Diroct roUing of iron powder strapo and aheets. Metalnrgia constr mas 15 no.7:468-47o n 163. y.7 L oo881-66 ACCESSION NR: AP4047897. ~40rj/0017/64/000/009/0381/0386 4, "-;", q q, AUT11OR: Frant-lu. 1, (Engineer); Latu, N. (Engifteer); Oreavuj N. (Engineer) TITLE: Experiments on the cladding of carbon steel plates with stainless steel 1 SOURCE: Metalurgia, na. 9, 19640 381-386 TOPIC TAGS: stainless steel, carbon steel, steel plate, steel cladding, compound ingot, electroslag melting ABSTRACT.- This article describes some aspects and variations of the K.M.K. 6cladding process, used primarily in the Soviet Union and based on the hot rolling inof compound ingots. The purpose of the Investigation was to establish optimum conditions for this procedure, using the existing Rumanian installations which up to the time of publication - did not correspond to modern requirements. The results obtained during the year 1963 are reported in this paper. In the compoun ingot procedure, the basic carbon steel is first forged. A package formed by two stainless steel plates, necessary fo r the cladding, are then introduced into its center. The two plates are kept together by welding their edges and are separated by an inert layer deposited between them. A schematic diagram of the ingot mold is given. The compound ingot thus obtained is passed through*the roXling millp under normal conditions, until twice the thickness of the intended Card 173 L 00861-66 ACCESSION NR: AP4047857 final product is achieved. This results in a pack'age formed by two strips or plates, with their edges welded all around. The welded edges are cut, and the itwo sheets are detached at the level of the separation layer. In this manner, each ingot results in 2 sheets or plates of carbon steel, clad on one side with stainless steel. However, these trials carried out according to the specifica- tions of the K.N.K. method, did not give the expected results. Two modified trials carried out with two series of seven ingots weighing approximately 800 kg each, and 4 ingots of over 2000 kg each, respectively, are described in detail and 3 schematic diagrams are given. These methods brought about the establishments, .of a good separation layer. A formula for calculating the cladding coefficient (Ki) is given. A Ki of over 100 is needed for a perfectly successful result. The Ki in the various methods used for the processing of the 600-kg ingots varied from.- 30 to 60-100. The results obtained with the 2000-kg ingots were less satisfactory. In both cases, the specific quantip (gIm") to be deposited on the surfaces was a function of the ty f the inert~materlals and the size of the cladded surface, besides depend,;ezhe weldingj%btained during rolling. The procedure of electroslaig meltinS involves the deposition, on a carbon steel brick,, of a stainless steel layer obtalned by th automatic melting of steel electrodes in a slag bath. The bath of molten metal(s then used for the formation of nit alloy, through the addition of alloying a emento in granulated form. The steps of this procedure are described in detaili and several diagrams are given. 2/3 *,ard L 00;~I'~ -66 ACCESSION NR: AP40478,57 This procedure makes possible the rolling of a 20 mm thick compound brick, and its cladding up to & ptoportion of 15%, without any special difficulties. 11ow- ever, it also necessitates important modifications. Finally, the authors commentl on the advantages and disadvantages of each !i0pd. "The following persons collaborated in these experimentst . Eng. A. lei4inia and Eng. I.N&td of the FWfescu Combinatul siderurgic Resita eh~i Steel Warks) of Ivb*T*C#M1~ -(R a Eng. G. Aveath of the Us.,ina "Republicall ("Republic" Pjalt'v)s in Bucharest, and Eng, -C. Savici and-S.T`16rga of the Uzina de tabla (Sheef- Wnrkalth Galatt." Orig. art. has: 12 fijjures and 2 formulas. ASSOCIATI-ON, ~rantiu, Laiu) Institutul de cercetart metalurgice (Institute of Metallurgical Research); @teavu] Institutul de corcetari tehnologice pentru constructli de-ia-sini (Institute for Technological Research on Machine Buildple) StMMTrED: 00 ENCL: 00 SUB CODE: 1*1 NO REF SOV., 001 OTHER: 002 rd 0'3/3 BORISOV, L.V. ; GAVRILOV, I.I.; jkj~,g TQV G 1. HATOV, I.V.. POLY AhTSE-V , V.A.., otv. red., MPitKOV, L.I., red. [Use or precast reinforced coDcrete in the construction of automobile roads for hauling lumber; materials for a Colifere'noal Primonenia ~-,bornogo -1holezoLy-,tona na stroitell- stvr r%vton-Iobilligkii dorog (ilia vyvozki lesa; materialy k SovEsh-.haniiii. ',,'ioskva, TSP-ntr. nauclmo--issl. in-t mekha- nizatsii i energetiki. lesnoi. 196.1,. 71 p. _'1000-6 01 SOV/169-59-5-4562 'Pranslation from:: Referativnyy zhurnal, Geofizika, 1959, Nr 5, p 42 (USSR) AUTHORS- Sheynmann, S.M., Frantov, G.S. TITLE: Magnetic Dipole Above a Double-Layer Medium. On the Geologic jjja& by Means of Aeroelectric Prospecting \4 _Map PERIODICAL: Tr. Vses. n.-i. in-ta metodiki i tekhn. razvedki, 1958, Nr 1, pp, !61 - 188 ABSTRACT. Comparing the various methods of aeroelectric pro specting, the authors come to the conclusion that using, as source of the field, closed loops with alterating current of audio frequency offers the most suitable for practice method, if the closed loops are moving together with the aircraft, as well as the receiver of the field. Basing on the described method, the authors wrialyze the field of a magnetic dipole above the original rocks covered with the overburden having a good conductivity. The developed theory can be applied to media, which a 're not bounded in horizon- tal directions. If the structure of the ground 15 more complicated, Card 1/2 the method allows the estimation of the expected order of variations SOV/169-59-5-4562 Magnetic Dipole Above a Double-Layer Medium. On the Geologic Mapping by Means of Aeroeleotrie Prospecting of the secondary magnetic field. The expounded theoretical considerations made it possible to draw the conclusion that the aeroelectrtc prospecting using magnetic dipole can provide a valuable material for charting the resistance of the original rocks. The accuracy of determining the contacts of different rocks Increases with an increased ratio of their conductivity. It is p . pssible to distinguish confidently the rocks from each other, if their conductivl~ies differ by a factor of 5 - 6 and the thickness of the overburden does not exceed 20 - 30 m. The presence of horizontal stratification in the upper mellow layer cannot hinder,under certain conditions, the application of the theory. In the authors' opinion, in the present stage of development of the aeroelectric prospecting, the proposed theory can be useful for experi- menters, planners and prospectors, A.A, Smirnov Card 2/2 AUTHOR3t 132-1-12115 Artamonovp L.V., Frantov, G.S., and Shuval-Sergeyev, S.M. TITLE3 Dow Methods of Electric Prospecting (Onovykh metodakh elektrorazvedki) ;ILI PERIODICA.Lt Razvedka i Okhrana Nedr, 1956,A# It pp 53-57 (USSR) ABSTRACTs The efficiency of electric prospecting operations was considerably increased by introducing the method of aerial electric prospecting. Valuable data for numerous districts were obtained by using aerial radiometric surveying methods. At the present time, aerial prospecting is being conducted by a number of USSR organizations. Besides the "VITR", the following institutions took part in this work: Institute for Mechanical Engineering and Automatics of the Ukrainian SSR Academy of Sciences (Institut mashinovedeniya i automatiki), the Moscow State University and the Institute for Soil Physics of the USSR Academy of Sciences (Institut fiziki zemli). At present, there are four different methods of aerial prospect- ing, each of which has its own nharacteristics. 1) The study of an electromagnetic field of an above surface source in motion by establishing a directly contact with the earth. 2) The method of measuring its own electromagnetic field Card 1/2 from the air, together with the receiving-measuring device. New Methods of Electric Prospecting 132-1-12/15 3) The measuring of the intensity of the magnetic field of the broadcasting radio station in relation to the geological formation of the district- 4) The measuring of changes of resistance by radiation of electric and magnetic antenna, caused by the characteristics of the geological structure of the district. There are five figures. ASSOCIATIONt V I T R AVAILABLEj IdbVW of Congress Card 2/2 SHUVAL-BMNYHV, M.X*.,;_FRAWOV, G#S. Uperlmental, aerial surveys by the endless cable method. Sov. geol. 2 no.1:112-120 Ja 159. (MIRA 12:4) 1. VaesoyusW nauchno-iseledovatellskiy institut matodiki i tekhhiki razved)d. (Aeronautics in geology) FRANTOT, G.S.; SHLJVAL-SXRGEM, N.M. Using the infinitely long cable method in aerial electric surveying. Razved. i okh. nedr 26 no. 1:37-42 Ja 160. (MIRA 13:12) 1. Vaesoyuznyy nauchno-iseledovateltakly institut metodiki i tekhaikl ra2vedki. (Aeronautics in geology) Ollectric prospecting) (Sulfides) ULIKIN, k1eksandr Borisovich; FRMTOV Gr nh - SHKINMANN, S.M., nauc: red.; SAFRONOVA, I.M., tekhn. red. (Electromagnetic fields used in induction methods of electric prospecting; review of foreign literature] Blektromagnitnye polia, primeniaemye v induktsionrqkh metodakh elektrorazvedki; obzor zarubezhnoi literatury. Leningrad, Gostoptekhizdat, 1962. 351 p. (KM 15:7) (Electromagnetic prospecting) VELIM, A.B.- FRANTOV G S - SHEYNMtJT , S.M. Intorpretation in multifrequency inductive electric prospecting. Pril:l. geotiz. no-31:'165-178 161. (MIRA 150) - .: (Electromagnetic prospecting) 51169 6.1/MOANA15/10 D263 D307 AUTHORS: Frantov, G. S. and Shulal-Sergeyev, 11. M. ---------- 'A TITLE: Aeroelectric exploration on the territory of Southern Ural and Kazakhstan PERIODICAL: Referativnyy zhurnal, Geofizika, no. 2, 1963, 32, ab- stract 2D193 (Byul. Nauchno-taklm. inform. M-vo geol. i okhrany nedr SSSR, 1962, no. 1 (35)t 85-88) TEXT: The main. results are-given of an aeroelectric survey carried Dut by the method of infinitely long cable, on the territories of Southern Ural and Western Kazakhstan. To investigate the possibi- litie'a of this-method in S. Ural, the authors chose a Cu pyritic deposit within..the copper-bearing belt of effusive rocks. The re- sistance of enclosing rocks varied from 100 - 400 to a few thousand ohms. The Cu pyritic deposits had the form of lens of massive or vein-disseminated ores, containing pyrite, chalcopyrite, sphale- rite, bornite, and galenite. The massive ores were well conducting! -and non-magnetic. Above the fundamental rocks there was a low-re- Card '1/2 S/169/63/000/002/115/127 Aeroelectric e5:ploration on ... D263/D307 sistance covering layer. The 20 kni long cable was extended parallel to the structures, 7 km to the West of the deposit. The receiving and measuring apparatue was carried on an MII-Ij (MI-4) helicopter. The receiver frames were placed in a gondola suspended 20 m below the helicopter. Plight altitude was 50 m; in individual profiles measurements were made at various hei-hta. Ground measurements con- firmed the results of aeroelectric exploration. Analysis of the -aterials showed that the infinite cable method yields valuable information both in the search for orebodies and in geological charting. ~-Abstracterls no.-te; Complete tranalation._7 i'd. 2/2 FRANTOV, G.S. Electromagnetic field generated by an infinite cable placed over a two-layer medium (wave zone). Geofiz. prib. no.l5s27-39 163. (MIRA 17t4) POLYAK, M.K.1 SMI RNOVA, I.A.1 FRANTOV, G.S. Aeroslectrio prospecting using the infinitely in the Kola Peninsula, Sov.geol. 8 no.2t9l-99 long cable mthod r 165. (MIRA 18:12) 1. Sopznyy sapadnyy geofizichsakiy traot, M- L 2~5 2,-66 __EVIT(l) G111 ACC NRa AP6007874 SOURCE CODE: tR/0387/66/000/00210042/00 AWHORs Frantov~, G. S.,_ ORG: All-Union Scientific Reseakch institute of ProspectIng Methods and Techniq (Vsesoyuznyy viiu-chno-Issledovatel'skly institut metodiki I tekhnik! r'azv-e6i)- TITLE, Use,of the infinite line method for determining the resistivity of a half- space fr~m measurements In aerial electrical 12rosEncti SOURCEs AN SSSR. lavestlya. Fizika Zemll, no. 2, 1966, 42-52 TOPIC TAGS: resistivity, prospecting, magnetic field ABSTRACT: A method is proposed for using graphs to find the resistivity of a uniform half-space. It is assumed that current flows In an Infinite line located at the in- terface between two media. The lower half-space is filled with a homogeneous Isotrop- ic medium which has a finite conductivity* Conductivity Is disregarded in the upper half-space ~diich is assumed to be filled with air. Magnetic permeability is assumed tq be everywhere the same as in a vacuum. Graphs are given showing the real and Ima- ginary parts of the horizontal component of the magnetic field perpendicular to the infinite line as a function of distance for frequencies of 244, 4889 976 and 1952 cps which are frequently used in aerial electrical prospecting. Formulas are given for determining the distortion introduced by use of a finite cable. An exampick is given Card 1/2 UDCt 550.837.6 L 25542-66 ACC NRt' AP6007874 illustratiq, use of the proposed method for plotting a map of resistivities on an area. of 450 kM2.' The author is sincerely grateful to V. 1. Dmitriyev for discussing a num- ber of theoretical problems encountered in this Orig. art. has: 6 figures, 25 formulas. SO COM OB/ SUBM DAM 060ct64/ ORIG RM OOS/ OTH RLT: 002 2/2 GAVRYUSHOV, V.V.; FRANTOV, R.B. Natoperative anesthesia in surgery of newborn infants and nursing infants; p~reliminary report. Khirurglia 39 no.7t67-71 J1163 (MIRA 16tl2) 1. Iz khirurgioheakogo otdeleniya (zav. - kand. med. nauk. A.G. Pugachev,, nauchnyy rukovoditell - prof. S. Ya., Doletski-y In- stituts, pediatrii. MIN SSSR. PASHERMIK, L.A. ;FRAIITOV, R.B. Use of muscle relaxants on newborn and breast-fed children Pediatriia 1.2 no.34-61-65 Mr,63 (MMA 17:~) 1, Iz Icliniki detskoy khirurgli ( zav. - prof. S. Ya.Doletskly) TSentralinogo instituta. usov----jhenstvovaniya vrachey i khi- rurgicheskogo otdoloniya (zav. - kand. mod. nauk A.G. Pugachev-) Institute. pediatrii A141 SSSR na baze Detskoy klinicheskoy boll- nitsy imeni Rasakova glavnyy vrach zasluzhennyy vrach RSFSR V.A. Kruzhkov). Ail HiNYAlffil, N.V., kand. iwd. nauk; FRANTOV,.R.B. Fluothane anesthesia In surgery of newborn and nurninf,. Infuntu., Sov. mod. 128 no.4-48-52 Ap 164. (MIRA 17:12) 1. Otdeleniye detskoy khirurgii (zav. - kand. med. nauk A.G. Pugachev, nauchnyy konsulltant prof. S.Ya. Doletskiy) Instituta pediatrii (direktor - dotsent 14.Ya. Studenikin) A1411 SSSR I TSen- trallh7 Inatitut travmatologil i ortopedli (direktor - prof. M.V. Volkov Moskva. !7,2 i3 FidtKIOV), R.B.; KUZIMINOV, O.D. Testing of attachments to ancathe'vic apparatus for younC children. Nov. mod. tokh. no-3:26-28 165. (MIRA 19: 1) . SOV/117-59-8-41/44 AUTHORS: and Lapitskiy, L.V. TITLE: A Cabin for 4iping Shop Lantern Panes RI,'DICAL: P.,Iashinostroitell, 1959, Nr 8 (USSR)VJ,-6 MZIRACT: In one of the shops of the Avtomobiltnyy zavod imeni I.A. Likhacheva (Automobile Plant imeni I.A. Likhachev) a special cabin has been constructed for wipinglantern panes from inside the building (see drawing). The cabin consists of a welded body that moves on four rollers along the lantern on a special path laid on beams of the transverse girders. There is 1 diagram. Card 1/1 MQ.7fCKA i K.; SOU*CEK' J.; SIAVXK I K.; JIRASEK' J.; JIIOS~K, A.; Technical asoistancei,SMETANOVA.'y R.P1 FRANTOVA,p L.; SIMONOVA, A. The treatment of experimental mouse hemoblastosis. I. The effect of some new folic acid antimetabolites on call transplanted leu- kemia in mice of the AKR attain. Neoplasma (Bratial.) 1.1 no.4: 389-397 164. 1. Institute*of hematology and blood transfusion, Prague, Labora- tory~of protein metabolism and protoosynthesis, Charles University, Prague, I-st pathological-anatomical institute, Charles University, Pregue, Czechoslovakia. K. ; ~,WUC~ K 1,714 1; TO V A I N'. I, ) x Tho treatment of experimental rnou:jc 11. I'Le eff ect of long-tern administration of some folic aclld mice or the AKR st,min. Nooplamny., 1. Institute of h(smatology and I'lood of protein mott,bollsri mid !~ragnie, C zo Clio-, Iovalr- iu. KHULTJIEY, Kh. (Ifulubel H ]- NYAMU, I. [Neamu., I.); EUVM,_IJFranto I.); MARTALOGU, IL.. tM;~tLogu, W.); SMM-Y -11 (Saintei, N.); IVASM, M. [Ivascu, H.J; EERINDE, A. tBe;indey A.] Scattering of low-energy protons on S32. Zhur. ekrp. i toor. fiz. 42 no,&6:14,33-1437 Je '62. (MIRA 15:9) 1. Ifistitut atomnoy fiziki Akademii nauk Rmaynskoy Narodnoy Respubliki,, Bukharest. (Pratona-Scattering) (sulfur) FRANTS, I,,F. Frm now on 1.wM taka-care. of this problem myself. Hauka i zhizn' 27 no. 4:40-41 AP 160. (MIRA 14:5) (Lenin, Vladimir Illich, 1870-1924) (Michurin.. Ivan Vladimirovich, 1455-1935) L.); PtVLOV,!KIY, R. Thk! ",B~-,,~900-ty'pe creep testing device. Zav.->t. T, n-./ 165. 3. '-Irazhakiy issledovat-ollskiy imstitut chernoy mcfalla-pi-1, RUS3V, L.; NIKOLOV, G.; 71LWTS-,S-. Characteristice of the clinical picture of acute nephritis in influenza. Suvrem.med.,Sofia no.8:54-58 '59. 1. Iz Svishtovskata obadinena gradska bolnitea. (INFLUBMA compl.) (NIMITIS atiol.) MEWO Liub.; FRAM, St.j NIKOL0V,.G- An un-asual case of congenital liver cirrhosis with thrombophlobitis of the collateral portal vessels. Suvrem.med.,Sofia no-9/10:190-193 159. 1. Is Svishtovslmta gradskm boluitsa. Gl.lekar-. G. Hikolov. (LIVER C IRRHOS IS c ompl. ) (THR%EBOPHLXBITIS compl. (PORTAL VEINS die.) KAGANOV, L. (solo Petrovskoye, Stavropollskogo kraya); FRANTS, V. (selo Fetrovskoye, Stavropol'skogo k-raya) The service industries of a district. Mest.prom.i khud.promys. 3 no*7:24-28 J'l 162. (MIRA 15:8) 1. Spetsiallnyye korrespondenty zhurnala 11~bstnaya pi-omyshlermost, i khudozhestvennyye promysly". (Stavropol Territory-Service induatries) 7 W, jWITS1J. Komsomol Isk-na-Amare) _C In a young faraway city. *st.prom. i khad.promys. 4 no.3:14 Mr 163, (MIRA116%4) (Kotiwor,iolsk-oik-Amur--Service industries) FjUNTSOVAS V.;,-FIUMS, Z.; LAMPLOVA, I. Developmental and species differences in the distribution of phenothiazine derivatives in the tissues of pregnant rabbits and rats and their fetuses. Physiol. bohemoslav. 12 no.2:150-155 163- (CHLORPROMA,ZItO) (MATERNAL-FETAL EXCHANGE) (PREGNANCY, ANIMkL) (METABOLISM) (PHENOTHIAZINES) ACCESSION NR: AP4009101 S/0056/63/-,,45/006/1822/1826 AUTHORS: Xhulubey, Kh.,- Frants'* Zh.; 1~artalogu, N.; SkY,*ntey, N.; Ivashku, M.; Berinde, A.; Nyamu' I. TITLE: Scattering of protons with. ene'r'gies below 5 MeV"b.,,P, Ne-20 A SOURCE: Zhurnal eksper. i teoret. fiz-1ki, v. 45, no. 61 1963, 1822-1826 TOPIC TAGS:. proton inelastic s6attering, excitation furiction, pro- ton elastic,scattering, neon 20,1 scattered proton anguldr distribu- tion, compound nucleus, compound nucle-Us model, excitation mechanism, scattering mechanism ABSTRACT: To check on the possible fdi-mation of a compound nucleus and to investigate the conditions unddk which the curves-of the V I angular dis'tribution for inelastic scattering change the"r form, the excitation'functions were measured for'elastic and inelalstic scat- t Card 1/3 N ACCESSION NR: AP4009101 tering of 3.35--5.15 MeV protons by Ne 20 at an angle of 900. The angular distributions for 3.65, 400, 4.15, and 4.35 MeV incident protons were also measured. The authors reported similar work at lower energy (Nucl. Phys. v.. 39, 686, 1962). variations in the energy dependence of the excitation function and the angular dis- tributions have confirmed the formation of the compound nucleus during the course of the reaction. Data by H. Heitler, A. N. May, and C. F. Powell (Proc. Roy. Soc. v. 190, 180, 1947) indicating a sharp increase in the elastic scattering differential cross section at angles below 500 are not confirmed. Elastic scatterin plays a largor role in the formation of the compound nucleus and this ac- counts for the observed increase in cross section at large angles. The change in the form of the curves of the inelastically scattered protons can also be attributed- to some effects of a compound nucleus in which a limited number of levels is excited. Orig. art. has: 6 figures and 2 formulas. J Card 2/3 ACCESSION NR: AP4009101 ASSOCIATION: Institute of Atomic Physics, Bucharest, Rumania SUBMITTED: 24jun63 DATE ACQ: 02Feb64 ENCL: 00 SUB CODE: PH NO REF SOV: 001 OTHER: 009 Card 3/3 MW FRJETSEN, B.S., YUSFIN, A.I. (Leningrnd) of hypoxia on color perceDtiOn [with sumonry in Nnglish]. Fiziol.mhur. 44 no.6:519-525 Je 158 (MIU 11:7) (COLCR VISIONI physiology. eff. of anoxia ("'us)) (ANOXF-MIA, effects. on color nercention (Rug))