SCIENTIFIC ABSTRACT BOBROV, V. A. - BOBROV, V. P.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R000205630002-3
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
June 9, 2000
Sequence Number:
2
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENCEAB
File:
Attachment | Size |
---|---|
![]() | 3.03 MB |
Body:
BOBROV V.A KOTLYAR,, G.V.
Seciimzxts of the Kazan stage in eastern'Trausbaikalia and
north-
eastoe-ru %ngolia, Dokle AN SSSR 14+9 uo*5.,1141-1144 Ap 163o
(MM& 160)
1e Geologoramdochnop upravleniye Nbngollskoy Narodnoy RespubUki
i VaesoytxzW nauchno-isaledovatellakiy geologicheakiy institute
Pi-edatavleno akademikom A.L.YanshiMm.
(Tranabilkalti "eology., Ztratigraphic)
T- ~ (~bbgolia-Geology, Stratigraphic)
BOBROVI V.A.; MODZALEVSKAYA, Ye.A.
New data on the Middle Devonian of eastern
Mongolia, Dokl,
AN SSSR 159 no.4793-7,95 D 16,4 NIRA 18:1)
1. Geologorazvedochroye upravlenip. pri Sovete
Ministrov
Mongol'skoy Narodnoy Respabliki i VBssoyuznyy
nauabno-issledo-
vatellskiy geologichaskiy institut. Predstavleno
akademikom
D.V. Nalivkinym.
46594-66 EWT(d/WT(~4)/jup(o
AM'NR: SO&ENEOWTOW&V M31 //ff/SW//8WWQ33/M6ir JD/W'
AUTHOR: Bobrov, V. A. (Engineer); Kh1mchenko, N. V. (Candidate of
technical sciences)
ORG: none*
TITLE: N,6ndestructive methods for the testing of chemical
equipment made of two-layer
metals
SOURCE: Khimicheskoye i neftyanoye mashinostroyeniye, no. 4,
1966, 33-36
TOPIC TAGS: ultrasonic naNv detector, metal test, flaw detection
ABSTRACT: One of the basic defects found in chemical equipment
made of two-layer metals
is the separation of the cladding layer from the base. The
article discusses nondestructive
methods for the testing of such equipment, surveys the available
ultrasonic equipment,
~g-describes the experience with ultrasound accumulated at the
NDkhirnmash, and outlines the
procedure for color defectoscopy of two-layer metals by means of
dyes developed at the
same institute (N. V. Khimchenko, L. 1. PodleenMa, Author's
certificate No.150690 dated
Card 1/2 UDC; 620.179-621.9-419.
.ACC NRt AP7000351 SOURCE CODE: UR/0413166/0001022/011710117
INVEN.TOR: Bobrov, V.,A.;,,Khimchenkoj N. V.
ORG: none
TITLE'. Method for ultrasonic quality''control of bimetallic
partas Class 42,
No.*188740 (announced by the All-Union Design and Scientific
Research Institute of
Chemical Machine Building (Vaesoyuznyy nauchno-issledovatel'skiy i
konatruktorskiy
institut khimicheskogo mashinostroyeniya)]
SOURCE: Izotreteniya, promyshleanyye obraztsy, tovarnyye zPaki,
no. 22, 1966, 117
TOPIC.TAGS: clad metal', quality control', ultrasonic quality
contro
, . ~ 4~ I ij
4101_11~c_ 1, ~. / wv_".. Of
ABSTRACT: ~12.s Autior Certificate introduces a method fo?
ultrasonic quality control
of bimetallic parts based on the excitation of ultrasonic waves in
the checked part
and recording of signals.. To increase the efficiency and improve
quality control,
interference-type ultrasonic waves are excited i 'n the clad'layer
at an incidence
Eingle of cross waves larger than the reflection angle.
SUB CODE: 13pJ01 SUBM DATi: 17Aug65
Card UDC: 620.179.16
ILI on DIT (d)/D1P(4 ~/EWPW/61p~ h) (1)
ACC AP6007668 SOURCE CODE UR/0413/66/000/003/0040/ook6"
AUTHOR. Zorin, D, Yes.; Bobrov. V. D.; Iyanoy,
ORG: 'none
TITLE:- Automatic machine- forshielded welding. Class 21, No. IT.842
7,
[a*nnounced by the Plant EleXtrik. (Zavod Elektrik))
SOURCE: Izobreteniya, promyshlennyye-obraztsy, tovarnyye %nakit not 39
-1966, 4o
TOPIC TAGS: automatic welding,velding equipment
ABSTRACT: An Author Certificate has been issued for an automa tic
shielded-welding machine us ingboth.continuous-and intermittent.velds
--(primarily for diskwheel~rims)$ containing'a holder, welding, heads,
amechanimfor th.eir:adjustment, a,wheel-rotation mechanism, a block-
device, and remote--controls. To increase the degree of automation
in producing welded wheels, the holder is equipped with a mechanism
for feedingthe vheelsinto the welding position, it is designed as
a pneumatic drive coupled with a revolving device which, in turn, is
equipped with a stationary pneumatio,cylinder and a rod with a spring
retainer for actu6ting the rotation of the. wheel to be welded (see
Fig. 1) Orig. art. hast 1:figure* I'D
UDC 6210791OT53*9.,03
BgPRQY,Y.D-; VARLAMOV, V.G.; GRASHIN, Yu.M.; DOWOSHEIN,
B.A.; KIRILLOV-
UGRYUMOV, VX.; ROGANOV, V.S*,; SAMDYLOV,~A.V.
Use of a threshold Cherenkov counter in separating 71' -
and /-* -
masons In-meson beams. Prib. I tekh. ek 0 8 no.3:55-57
Ff-qe
go
163. (MIRA, 160)
TIM: Capture of negative, Kullons &;tMB in a chenical compamia
soul=$ zhvrjwl eltspe
mo=W i~oretizheslrqy fizWO vo 46t no. 4 9IS65."
1197-1199
On ~'c4rtiiiei` effective affinity, nesia atcm
TOPIC TAGSS
ABSM.CT: 7he authors mea0awed,tbe relative yrobabi.1,itlee of
captured negative
MUMS by atama in several cherIcal corpmdal, vith an aim at
extracting infornation
necessary for the interpretation of other experiments vith muons.
The results show
that for the campmnds- inveutWted (WIs, CsC1,, ZuO, ZnSI w?,d AICu)
the Fera-
T
Teller Zo-law does not d
eiuibii the experiment satisfactorily. An analysis of the
available data shows that campartd with the prediction of the Zlaw,
mesic atma
of the elements wbieb hwe relatively lane electrork-affinity energy
are produced
vith so-me preference. nie results show that in most cases the
tendenty to prefer-
red far=tIon of the neale atmu of the el4ment with the larger
electron affinity
C
ard 1/2
BOBROV2 V. P.
36701. Opred Eleniye Raziaerov Vpadiny Zublev'Prouya,.hek
41,a Osnovanii Izucheniya
Usadki'Struk-hki Trudy Tul. Heklian. In-Ta, Vyp- %, 1949,
S. 64-7B - Bibliogr:
7 Nazve
SO: Letopis' ZhurnalfriykIi Statey, Vol. 50, I-,Iosl,-va,
1949
BBOBROVV V.P. ots.,kand.takhn.nauk
Using the method of dividing grids in investigating
areas of
deformations Aused. by cutting metals.
Ixv.vypeucheb.zave;
mashinostr. no.2.*116-123 158* (MIRA 11:12)
1, Tul'skiy mekhanichaskiy inatitut.
(Deformations (Wchanics)) (Metal cutting)
SOV/123-59-15-59506 '-.
Translation from: Referativnyy zhurnal. Mashinostroyeniye, 1959,
Nr 15,pp 89 - 90
(USSR)
AUTHOR: Bobrov, V.P.
TITLE: Nature of Growth at Metal Cutting
PERIODICAL: Tr. Tullsk. med. in-ta, 1958, Nr 8, PP 3 - 10
ABSTRACT: There are two basic hypotheses on the causes of the
occurence of
growth. According to the first, growth is formed of metallic
particles
which are out off by the tool from the cutting surface and
squeezed by
the pressure of the chips coming off. According to the second
hypothesis
growth represents the dead zone of the metal of the chips which
is formed
in front of the face of the tool under certain temperawre
conditions.
Both hypotheses give rise to a number of objections. The
investigations
of the grasping of 'the meta13 at their joint plastic
deformation does
much for the comprehension of the nature of growth. Ii was found
out by
tests that the grasping of metals, i.e. the formation of stable
temporary
Card 1/2 connections between touching surfaces can take place at
room temperature
SOV/123-59-~15-;-595E)6
on the Nature of Growth at Metal Cutting
and at!higher ones. Obviously the grasping of metals is based on
diffusion, It can be
assumed that the formation of growth takes place as a result of
the grasping of materials
of the tool and that of the chips interlocking at their plastic
dc-P014mation during the
cutting process. 6 figures, 10 references.
P,V.A.
Card 2/2
V-
eo v nisiTiL' M.A., kand. tekhn. nauk, dote.; YOMINM, I.P., Imnd.
tekhn. nauk, dote.;
.~B- _~:and. tekhn. nauk, dote.; TBRYTLIN. A.Ya., inzh.
BD RDV#j.?j-s
Characteristics of the surface structure df decarburized malleable
iron castings and their machinability. Trudy THI no.ll-.66-77 '59
(MIft 1202)
(Cast iron-Reat treatment) (Metal cutting)
t
S/l4y6O/OOO/OO8/012/014/XX
D212 D304
AUTITOR: Upbravo V.P,l Candidate of Technical Sciences# Docent
TITLE; A study of the deformation of the layer during free
cutting by a tool with the angle of inclination of
the main cutting edge not equal to zero
PERIODICAL: Izvestiya vysshikh uchebnykh zavedeniy.
Mashinostroye-~
niyep no. 81 19600 105 - 109
TEXT: N.N. Zorev (Ref. 3: Vo~rosy mekhaniki protsessa rezaniya
me-!
tallov (Problems of Miechanice of the Process of Metal Cutting)#
blashgizt 1956) supposed that the displacement of elementary
layers
along the cutting edge does not cause any additional
deformation of:
these layers in the direction perpendicular to the plane of
displa-,
cement. To verify this, the author has carried out experiments
of
free cutting of carbon steel; the velocity of cutting was 2
m/min.
In the scheme I the sides of the specimen formed an angle 9 =
450
with the vector of velocity which was normal to the cutting
edge,
The angle of inclination of the main cutting edge in the scheme
II
Card 1/2
8/145/60/000/008/012/014/XX
A study of the deformation of ... D212/D304
was A graph of the results of measurements is given. The de_~
gree of longitudinal deformation of the chip in the direction nor-
mal to the edge and the angles of displacement are found to be eqial
in both schemes. The author concludes that the assumption referred,
to above is correct. Suitability of several coefficients of the
chip for the estimation of its deformation is also discussed. There
are 6 figures and 7 Soviet-bloc references.
ASSOCIATION: Tulskiy mekhanicheakiy institut (Tula Mechanical.In-,
stitute)
SUBMITTED: December 22p 1959
Card 2/2
BDMV, V,F., lush,
Investigating the efrvq~ of the wqar of plimger paire on fuel
injec-
tion$ Trudy XHIIT no-35:33-49 160. (Km 11:10)
*W (BLesel Opgines-rael Oystems)
i
BOB.-L,C,V.1 V.r,.., inzh. (g.IQmr'kov);
I-"*'J7-Ir4TjOV, T.F., !.and.te!dIn-na:,,Iz
7
14"'e_~--X"-I-,rg--IMar Ikov)
Effoot of the wear of the fuel aystem on the
operation of the
D50 diesel locomotive. Ele'r. i teDl. tiaga 5
no.5:26-2", 1-17
rf N
161. ("r-, Ili--Ii
(Diesel locomotives)
29559
3/122/61/000/005/009/013
D221/D304
AUTHOR: Bobrovp V..F.t Candidate of Technical Sciencesp Docent
TITLE: The importance of lubricating and cooling fluids du-
ring machining of titanium
#1
FERIUDICAL.- Vestnik mashinostroyeniyatAno. 5, 1961, 62 - 63
TEXT: Practice of machining titanium and its alloys
demons-trates
that the effects of coolants are greater although different from
the case of carbon and alloyed steels. The article quotes the
re-
aults of experiments on determining the effect of some coolants
on
main component of cutting forcep Pp force of advance P. and mean
coefficient of friction ji due to free cutting of titanium BT 1
(VT
1) with a broad tool made in steel P 18 (R 18). The mechanical
V~
properties of metal and condit-ttione of machining are
indicated.
zte average coefficient of fri6tion was assessed as the ratio of
force of fric*ion to the normal force. Forces on the back
surface
of tool were not taken into consideration. Twelve coolants were
tested and the results tabulated. The figure illustrates average
Card 1/3
29559
S/122 61/000/005/009/013
The importance of lubricating ... D221 D304
coefficients of friction, obtained during machining in various
me-
diae Observation on chip formation revealed that pure titanium
is
not apt to build upp although intensive adherence of its
particles
on the front edge of tool was noticed. Notwithstanding the high
plasticity of titanium, deformation of the chip in air is small
which may be accounted for.by the low average coefficient of
fric-
tion. Data allow the following deUctions to be made. In
contrast
to carbon andElloyed steelBp watered coolants do not reduce
fric-
tion coefficient of titanium, but do increase it. The average
coef-,~
ficient of friction when cutting steel 20X (20Kh) in water
coolant
reduces former by.half as compared to machining in air. A
similar
decrease was noticed when using emulsions and other fluids. The
application of mainly lubricating fluids which reduce friction
when
machining steel, has little effect on cutting titanium. Olein
acid
and fluid no. 2, which contain a surface activating additive
rela-
tively reaace little the average friction coefficient, whereas
such
activated fluids as petrol or fluid no. 1l causetits increase.
The
most effective fluids for reducing friction are mineral
graphitized
oil, fluid no. 2t spindle oil and "sullfofrezol"p i.e.
lubricants
Card 2/3
29559
5/122/61/000/005/009/013
The importance of lubricating D221/D304
with high viscosity~ Popular coolants that produce minimum coeffi-
cient of friction are water solution of sodium nitrate and citric
acid,, These fluids possess good cooling properties as well, Data
demonstrate that the naln conponent of cutting force increaaes
on.-
iy when using kiater; emulsion, citric acid and water solution of
sodium nitrated The other lubricating fluids reduce the main
compo-
nent5 carbon tetrachloride being the best. There are I figured 1
table and 2 Soviet-bloc references~
,A
'5b
,BNOBARR04-1wXQIod_Fomiahp kand, teklit. nauk;
GRANOVSKIY, G.L.,
doktor tekhn. nauk,, prof.., retsenzent; BALAIMIN,
A.F.., red.
izd-va,- UVAROVA, A.F._, tekhn. red.
(Effect of the angle of inclination of the main
cutting edge
of cutters on the process of metal
cutting]V2iianie ugla na
klona glavnoi rezhushchei krwki instrumenta na
protsess re
zaniia metallov. Moskva, Mashgiz, 1962, 151 p.
(MIRA 3-5:7)
(Metal cutting)
BOBROV-, V.P.
Determining the depth of a ohaving-groove in broaches
. with inclined teeth, Stan.i instr. 34 no.107-38 A 163.
(MIRA 16:2)
(Broaching machines)
KUZNETSOV,, T.F., dotsent, kand. takhn. nauk;
DOBROV, V F., kand.
tekhn. nauk; SURZHENKO, Z.I., inzh.
Investigating the fuel systam of the type D50
engine in
connection with the increase of its power and
economic
efficiency. Sbor. nauch. st. KHIIT no.63:21-26
162.
(MIRA 16-11)
~M-N)- MMM/mM i
A&ESM14 Mr- 0276/65/000/0021BI99/B!99
SOURICEI. Ref. zh. Tekbnolosiya mashinostroyeniya. Sv. t., Abn.
2B1379
AUTHOR: -BQbxDY,-Y-, F.
TME: Analysis of the operation of - tools 'with a travel I Ing
cu.tt I ng zdge
CITED SOURCE: Sb. Materialy Vauchno-telth. konferentoll Tulsk. pol
ttak~~, ill-td
1964. TUla, 1964, 6-8
TOPIC TAGS: rotating cutter, seco 'Mary cutter motion, cuttpr
operation analy-sis,
cutt*r rotation erwle, cutting edge wesr.. chip forrantion, travell
Uig lathe
TrANS11,M-10-IN: '-7'-,1.;- pr4acess of chip forza t toll and the
(-'onditicr-n of Chl-p deform.-altion.
are altexed 5igniiicantly w1en a secoadary motion, longittieflw-.'~
in rp~at ~ors t7v th--
C-ittlag edge and ;'t Spec-6 WT, is iniPsrtcd t0 A toc'l
fined by toe vectoT Pit cutrin.g sp-ecd V. This is relnt4-d to the
c'w;n;~.n b -~T
Lh2 v-pe-ed ratio WTIV 1-r) the otatiC angle -v '1'10wr
iretrl-~ And a-wlysis of the
ti:avel !zngzw'~1.Sc im relation to their edgen. It
il~c r cc, f) e9
zarv angle durias the cuttkns opuration a6 the Statict; ar"g~e
ca'-4
1/2
ACCES 10,'N NR: AR5.00934A
th is dec rease in tens Ifying- Vith.: the --depth of t h-'e Cut.
The thickness of the re-
moved 14yer of-material,increases and-the,effective length of the
cutting edge
era blati.ve car : n ens 6, which increases the amount of heat
decrea e
s-s.. 0v 1.1 k ift
Pzai`t-ted and intensifies the thermal~.-stress on the cutting edge
point. Rence, the
selected angle of cutter axis rotation relative to the axis of the
machtned Piece
sbould be minimal and calculated so as to insure n stable rotatioa
of the CULLer.
Dynamically speaking, the operation of rotating cutters is
characterized by lower
Msrsitudes of forces 1!2 and Py, in Contrast toTwnxotating cutters,
and higher
magnitudes of force F.. ThLN superior wear resistance of rotatl-n.c?
cutters, T'iften
compared to non-rotating tools, is attributed to the fact that the
work performed
by each point of the cutting edge in a rotating cutter is lesE; by
several factons
of ter. over a period of time than the work performed by the same
point on a non-
rotating tool. The author prAsents formilas for calculating the
descent angle of
the chip and the overall relative shear governiag the level of
deformation in the
removed chip. L. Tikhonova.
,SUB COM, IK 00
Card 2/2P'jj
WBROV. V F., Irax",tekbA,nauk,, dotsent
Electric elastic dynamometibra for the measurement of cutting-
force component3 in turning. Izv*vys,ucheb*z&v*; mashinostr*
no,,
7:197-200 163. (MMA 16:1.1)
1. Tullskiy mekhAhidh9.9kiy institut.
Pf-
ACCESSIO~ fau:
- AP5007176. S/0266/65/000/603/000/0643
AUTHOR: (Vinichenko, G.' 0. Tarasenka, V. A., Shtan1ko V. M.; Panyjabki~", A,
Y4-
'Bobrov, V. G.;- Kom-ogorov, N. N.
TITLE: A cutting fluid for hot finishing of metals./ Class 23, No. 167940
SOURCE: Byulleten' imobrateniy i., tovamyk~ znakov,.n6. 3, 1965, 43
Topic TAGS: cutting'fluid'.
ABSTRACT: This Author* a . Certificat-6: introduces a 'cutting fluid for hot
finishing
of metals. The fluid is based .on '00. MM'on salt, graphite,'mineral oil and
sawdust.
In order to avoid surface carburization, the fluid also contains kinc sulfate,
a
mixture of ferrous and ferric h~drokiAes and potassium sulfate.
ASSOCIATION1. none-
REMICHENKO) V.A.; 130BROV) V.I.,, RMAKIN; A,V.;
SOLOVIEV, V.I.
Smelting titanium in a DVP-200-500 furnace. Titan i
ego splavy
no-9:255-263 10. (MRA 16:9)
(Titanium-Blectrometallurgy)
BOBROV, Y.M.-, VORONOY, A.A.; aWOV, I.A.; IYAHOV, V.I.;
KARPOV, G.V.;
Y.Te.; MWOY, Y.T.; SIROTKO, Y.K.; SIRTr, H.S.;
SUKHMOT, L.A.; URUSOT, I.D.; MISOT, T.Y.,- FOMINA,
Te.N.;
KOSTWO, M.P., skademik. rod.; DOWTOV, P,S., red.izd-va;
SHIMOTA, A.T., tekhnored.
[Blectrodynamic modeling of power engineering systems]
Zlektro-
dinamichaskoe modelirovanie onargeticheakikh sistem.
Pod red
X.P.Kostenko. Moskva, 1959. 406 p. (KIRA 13:2)
l..Akademiya nauk SSSR. Institut alektromekhaniki.
(Blectric networks-Blectromechanical analogies)
BOBROV, V*M*; GLPOV, I.A.
Use of an electrrAvuamlo model for studying an ionic self-exci-
tation system of large oynchronous generators. Sbor. rab. po
vop.
elektromekh. no.6tll6-132 t6l. (MMA 14:9)
(Turbogenerators)
BOBROV, V.M.,_.inzh.;_GjEBoV, I.A.,
kand.tokbn.nauk; KASHTELM, V.Ye.,
'114.; SIRYX, N.S.-, inzh.; GERTSEMERG, G.R.,
kand.tekhn.nauk
Effect of excitation systems on the-stability of
the parallel
-Operation of large.turbogenerators. Maktrichestvo
no.7:7-13
11 61. - (MIRA 14:9)
1. Institut alektromakhaniki Ali SSSR (for Bobrov,
Glebov,
Kashtelyan, Siryy), 2. Vaesoyuznyy
alektrotakhnicheskiy
institut (for Gertsenbarg).
(Turbogeneratore)
V~
- ~~Oyjl V.M.; GLEBDV, I.A..; SKOSYREEVAv T.N.
Deterinination of currente and losses in the damper
winding of an
auxiliary synchronous generator with independent
electronic exci-
t,ation. Sbor.rab.po vop.elaktromekh.no.8&181-189 163.
(KMA 16:5)
(Electric generators)
BOBPOV, V. N.
m
BOBROVY Vasilly "ikolayevich; DAHCHICHp Valeriy
Valeryanovich; KUZNNTSOV,
A.Laiceanar aiexuandrovich; LCKHANIN, Konstantin
AnatollyevLch; SA-
VIN,M.M., redaktor; SARITOV,A.. takhnicheakiy redaktor
[Work practice with the mining grab-loader) Opyt
primeneniis, pro-
khodcheskogo greifernogo agregata. [Moskva)
Ugletekhizdat, 1955.
36 p. (MURA 9:3)
(Mining machinery)
15elelfav V. /V.
AUTHORt
None Given 117-58-5-24/24
TITLEi
Conference
on Construction and Utilization of Casting
Equipment
(Konferentsiya po konstruirovaniyu i ekspluatatsii
liteynogo
oborudovaniya)
PERIODICALt
Mashinostroitell, 1958, Nr 5, P 48
(USSR)
ABSTRACT:
In December 1957 a scientific-research conferenc
e took place
in Gorlkiy dealYng with the construction and
utilization of
casting equipment. It was organized by the
department of
casting of the NTO MASHPROM. At the conference were
900
representatives from machine building plants, casting equip-
ment plants, scientificiesearch institutes, universities, etc.
A
total of 28 reports were given. I.P. Yegorenko, Candidate
of
Technical Sciences (NIILITMASH) reported on the actual state
and
development of the casting technique. P.N. Aksenov, Doctor
of
Technical Sciences (MAMI) reported on automated lines of
sand-blowing moulding. L.M. Mariyenbakh, Doctor of Technical
Scienceii (MVMI) reported on the subject "Mechanized Drying
Kilns". G.3. Zelichenko, Engineer (Leningrad Branch of
Soyuzpro=ekhanizatsii) reported on "Automatic Lines of
Molding in
Casting Shops". A.D. Ginzburg (LF VPTI tyazhmash)
Card 1/2
reported on a self-constructed automatic machine for the pro-
117-58-5-24/24
Confer~wowwon Construction and Utilization of Casting Equipment
duction of shell moulds. I.N. Bobrov (NIILITMASH) talked
about automatic machines for 'moulding, A.V. 6dinokov,Engineer,
reported on modern sand blasting devices. G.S' Taburinskiy,
Engineer (EIITLITMASH) reported on "Automat 'ic Lchines for the
Production of Shell Molds and Cores". Z.D. Levin (Plant KATEK)
spoke on "Projects an4 Utilization of Equipment for Mechanized
Casting", I.Ve Yefimovt Engineer, spoke on "Mechanization
and Automation of the Technological Process of Casting With
Meltable Models". G.R. Nikol'f'skiy, Engineer (NIILITMASH~ spoke
on hydraulic and sand-hydraulic cleaning of castings. B.G.
Shpitalfnyy (NIILITMASH) talked about the automatic moulding
machine Nr 962b4-
AVAILABLEs Library of Congress
Card 2/2 1. Casting eqaipment-Development 2, Casting
equipment-App1icptlon
0 T~ Ro v L/I A),
AUTHOR: Bobrov, V.N.
TITLE: Effect of Moisture
ments (0 vliya'nii
priborov)
3T-11-4/18
on the Readings of Magnetic Instru-
vlazhnosti na pokazaniya magnitnykh
PERIODICAL: Trudy Nauchno-issledovatellskogo instituta zemnogo
magnetizma, 1957, Nr 11(21), pp. 87-100 (USSR)
ABSTRACT: The article deals with shifts and "Jumps" in readings
caused by moisture, the Edelman and Schultz Z-variome-
ters, and the Yanovskly H-variometer. The following
authors are cited: Popruzhenko, S., and Kokovkin, P.F.
There are 11 figures and 2 references, both USSR.
AVAILABLE: Library of Congress
Card 1/1
.r J
e A-~
AUTHOR: Babrov, V. N. 3T -12 -1/12.
TZUZ: Distributlon of MeatrIcal Conductivity in the Interior of
the
Earth (K voprosu o raspredelenli elektrichemkoy proyod1mosti
VnUtri' 2M1 I )
PERIODICAL: Trudy lauchno-losledovatellskogo Instituta. mmogo
Magnstizes,,
iononfery I morostranenlys radlovoln, 1957, Nr 12 (22),
IN- 3-19 (USFR)
ABSTRACT: Mw electrical conductivity of a model of the Earth
with a unifors
conductivity core depends an the longitude and depth of
penetration*
Maximia conductivity calculated frcm various harmonies is
observed
in the ventern hemisphere and u1nium conductivity in the vestern
portion of the eastern bodsphire. Conductivity increases vith
depth; the Incressi im.partioularly great vithin the 500-600 ka
depth saw and edutInvas further though at a lower rate. A #Wlar
longitudinal reldUan is evident in calculating the thickness of
the non-conductive earth crust, v1th the =z1=a thickness In the
vestern hesdsphere,, and the Wal- thickness in, the eastern
portion
of the eastern hadmpbere. 7he article propounds a matbamstleal
Card 1/2
3T-12~1/:L2 . '.. -
Distribution of Electrical Conductivity in the Interior
of the Earth (Con't)
theory of electromagnetic induction In a spherical model
of the Rarth,,
composed of a uniforiply conductive core and a
non-conductive shell., and
a theory of'imiaitloi In a thin conductive sholl. An
experimentdIly
determined.Tatio of smj~lltudes-and phase differences
between ext
initial fields is givan. Errors of observation are
insignificant, par-
tieularly at high values of cooductIvItys Me treatment
throusbout Is
Mathematicale 2he authors mentioned in the article are
N. P. BanIkors.
and A.'No Ukhonove There we 4 figures, 4 tables and.3
references, of
vhIch 2 we Flumalan.
AVAILABLE: Library of Congress
Card. 2/2
ye-wthwSai (diss) -,"Sam Tmblww of -the theory of
Bo#v,.-!. ~N-, camd or pb
of4aeatronapetic induction mid the Distribution of Electrical
Conductivity Insids
the Earthl
A - I It 19590 7 pp (Institute of the Physics of the Earth
imeni Oe Yue Shildto,
Aaademy of Sciences WSR) (lLp 6-609 120)
89783
(liq q) j1y3j S/169/61/000/002/038/039
AOO5/AOO1
97470
Translation from: Referativnyy zhurnal, Geofizika, 1961, No. 2,
pp.- 53-54,
# 2G366
AUTHOR: Bobrov, V. N.
TITLE: The Theory of Electromagnetio Induotion Within Leads Having
Inhomo-
geneous Conductivity, and Its Application to the Calculation of
Electric Conductivity Within the Earth
PERIODICAL: "Tr. N.-i. in-ta zemn. magn. ionosfery I rasprostr.
radiovoln",
1959, No. 15 (25), PP. 3-28
TEM The author considers the problem of determining electric
conductivity
In a limited region of the Earth on the basis of the theory of
electromagnetic
induction within an inhomogeneous lead. The problem Is solved for
the case when
X(conductivity) increases with the depth, and the special case of
X= const..
The solution is carried out in rectangular and cylindric coordinate
systems. In
rectangular coordinates, the conductivity is given by the relation:
X = ;Gexp
[-2m(z-zl)/zo], where m is an integer > 0, X3 = const., z, is the
plane separat-
ing the lead from the dielectric; z0 is a plane tangential to the
Earth's surface.
Card 1/3
89783
S/169/61/000/002/038/039
A005/AO01
The Theory of Electromagnetic Induction Within Leads Having
Inhomogeneous
Conductivity, and Its Application to the Calculation of
Electric Conductivity
Within the Earth
The potential of the field of m agn etic variations in a
dielectric is presented
in the form:
V B exp (z z )] +
f n n 0
n m
+JmexpWm (z - Z)] cos (~nx+ Y, sin (8my+
n n 0 1 1 n ? 2M)'
where E(t) and y(t) are complex numbers characterizing the
external and internal
parts of the field; X, )), 8 are the gradients of magnetic
variations along the
coordinate axes; and t12 are the phase angles. Within the lead
is B = rot Al,
where A is the veTotor po ntial. From the condition of
continuity of the field
in the In;erface between lead and dielectric, a system of
equations containing E
and J is obtained, and their ratio is determined:
EIJ - (EOIJO) exp [ i (E.
Card 2/3
89783
S/169/61/000/002/038/039
A005/AOOI
The Theory of Electromagnetic Induction Within Leads Having
Inhomogeneous
Conductivity, and Its Application to the Calculation of Electric
Conductivity
Within the Earth
where E~jJo is the ratio of the amplitudes of the external field
and the internal
field, 8 -TJ is their phase difference. Hence the expressions
for *k and zo 7 z,
(thickness of the non-conducting layer) are obtained. The
special case of the
homogeneous distribution of conductivity, m - 0, Is considered.
The values of
E/J are obtained for them different special oases depending on
the product of the
penetration depth of the alternating current by the vertical
gradient of the field.
The approximate formulae for the calculation of X and zozl
ooincide practically
with the exact formula. The solution of the induction problem in
cylindric
coordinates leads to formulae analogous to those obtained in
rectangular coordi-
nates. Formulae are derived for the partition of the field of
magnetic variations
observed at the Earth's surface into the external and internal
parts. From the
data of 12 observatories on 8 of variations in summer 1933, the
conductivity and
depth of the non-conduating layer were calculated. The results
(see lable 1) point
out the inhomogeneity in the distribution of conductivity within
the Earth. There
are 10 references. N. Rotanova
Translator's note: This is the full translation of the original
Russian abstract.
Card 3/3
89784
0 (/ 1413, 11 q
.~ S11691611000100210391039
9,9700 A0051AOOJ _
Translation from: Referativnyy zhurnal, Geofizika, 1961, No. 2, P. 54,
f 2G367
AUTHOR: Bobrov, V. N.
TITLE: Electromagnetic Induction Within a Thin Spherical Shell With
Inhomo-
geneous Conductivityand Its Application to the Calculation of
Electric Conductivity Within the Earth
PERIODICAL: "Tr. N.-i. in-ta zemn. magn. ionosfery I rasprostr.
radiovoln", 1959,
No. 15 (25), pp. 29-56
TEXT: The author considers the problem on the effect of inhomogeneous
distribution of conductivity of the Earth on the induced geomagnetic
field. In
the solution, an idealized model of the Earth is used, and It Is
assumed that the
Earth consists of a non-conducting sphere covered with an infinitely
thin spherical
shell having inhomogeneous conductivity )(. The fundamental equations
of the
electromagnetic inducticn theory within a spherical shell are
considered. The
solution of the problem is presented for some special cases of
distribution of
conductivity: 1) homogeneous distribution of conductivity; 2) the
inducing
field is represented by one harmonic
card A
89784
3/169/61/000/OOP,/039/039
A005/AO01
Electromagnetic Induction Within a Thin Spherical Shell With
Inhomogeneous
Conductivity,and Its Application to the Calculation of
Electric Conductivity
Within the Earth
im exp (i o~ t)
n m
and the distribution of conductivity depends only on
coordinate 0;( - 11f and
f - fo(l + F_ Cos 9); 3) the inducing field Is represented
by several harmonics,
and the distribution off is analogous to the aforementioned
case; 4) the
inducing field is represented by an arbitrary number n1 of
harmonics of the same
order m, and the distribution of conductivity is given by an
arbitrary number (s)
of zonal harmonics
S
8 PO (COs 9).
f0 8 s
The formulae are considered for the transformation of
spherical harmonics at the
transition from one coordinate system to another. These
formulae are necessary
for determining the induced field when the inducing field is
expressed in spherical
harmonics relative to a coordinate system with one symmetry
axis, and the distri-
bution of conductivity has axial symmetry relative to
another coordinate system.
Card 2/4
89784
S/169/61/000/002/039/039
A005/AO01
Electromagnetic Induction Within a Thin Spherical Shell With
Inhomogeneous
Conductivityand Its Application to the Calculation of Electric
Conductivity
Within the Earth
The calculation of the induced field with a distribution of
conductivity with
axial symmetry is exemplified. The analysis of the effect of
distribution of
conductivity, inhomogeneous in latitude, on the induced field is
carried out.
The distribution of conductivity over the .9urface of a spherical
shell is given
In the form 7/(1 + oos e) , where X0 is the average conductivity
from the
data of S i -monies PI ana P
.-variat ons for har When inhomogeneous conductivity
exists, a series of harmonies in the induced lield corresponds to
every harmonic 14
in the inducing field. The results of analysis show that for a
sufficiently
large value of X0 the inhomogeneous distribution of conductivity
over the lati-
tude does not affect the induced field, i. e., the same harmonic in
the induced
field corresponds to every, harmonic of the inducing field, The
amplitudes of the
other harmrnlos are so small that they can practically be neglected.
For smaller
values of X,,, the inhomogeneity in distribution of conductivity
affects noticeably
the induceci field, and it is necessary to take into account in
calculations a
series of other harmonies in addition to the basic harmonio.
Numerical values
Card 3/4
1
89784
S/169/0/000/002/039/039
A005/AOOJ
Electromagnetic Induction Within a Thin Spherical Shell With
Inhomogeneous
Conductivity,and Its Application to the Calculation of Electric
Conductivity
Within the Earth
of amplitudes and phase angles of the induced field are presented
for various
distributions of conductivity. There are 11 references.
N. Rotanova
Translator's note: This is the full translation of the original
Russian abstract.
Card 4/4
BOBROVv V.N.
Temperature compeneatjob*62 magnetic instruments by the use of
antipara.Uel vapeto. True NIZMIR no.l6slG7-n6 160.
(MMA 1413)
(Nagnotic instruments)
BOBHOVP V.N.
Temperature oompens4tion of quartz Zpvariometere and the effect
Of
humidity on their readingo,,Trudy-NIZKIR no.16-.327-143 f60.
(Mapstic v4riameter) (MIRA 34;3)
'-WJ3ROVO V.N.
M-
The qwwtz 7--mariometer. TTudyXjZMjR,no.16;164-169 160
I
~LRA 14:3)
(Hapetic variometer)
k-,-_ BDMOV p V. N.
Instrument for determining mapatic moments and -temperature
6o-officients of magnets. Trady'NUMM noa6t.178-i4 160.
, (MM U .-.3)
(Mapetio instruments)
I
AUTHOR: Bobrov, V. N.
TITLE: Quartz T-variometer
.31659
B/570/61/000/018/003/004
B116/B108
SOURCE: Akademiya nauk SSSR. Institut zemnogo magnetizma,
ionosfery
rasprostraneniya radiovoln. Trudy, no. 16(28), 1961, 50 - 54
TEXT: Construction and mounting of a new quartz variometer
for measuring
the total intensity T of the terrestrial magnetic field in
magnetic ob-
servatories is briefly described in this paper. The author
gives a de-
tailed description of the sensing element in the present
periodical, P. 55.
The first experimental type of the apparatus was developed
and produced in
1959 by the kvartsevaya laboratoriya IZMIRAN (Quartz
Laboratory of the
IZMIRAN). In 1960, the mentioned laboratory produced the
first experi-
mental lot of such variometers in cooperation with the otdel
opytnogo
priborostroyeniya IZMIRAN (Department of Experimental
Instrument Construc-
tion of the IZMIRAN). The universal sensing element (Fig. 1)
is the basis
of the apparatus. The quartz system is adjusted such that the
temperature
coefficient of the element equals zero, and that rotation
axis and mag-
Card 1,X
31659
S/570/61/000/018/003/004
Quartz T-variometer B116/B108
netic axis of the suspension system lie J., a plane parallel to
the upper
casing surfacep the light spots of the movable mirror and of the
fixed
mirror being bound to coincide on the recorder. The temperature
coaffi-
0
cient of the adjusted apparatus is + 0.2y per 1 , and may be
neglected.
The adjusted element is attached to the support so that the
rotation axis
of the suspension system is perpendicular to the rotation axis of
the
support. The upper casing surface has to be perpendicular to T in
order
to direct the element properly to the direction of the total
intensity T.
The zero point can be varied up to � 5000Y with the aid of
additional
magnets (Vicalloy, temperature coefficient 5 - 10- 5). The first
experi-
mental variometer was mounted at a distance of 3.5 m from the
recorder in
the variation pavilion of the Tsentral ,naya magnitnaya,
observatoriya
(TsMO) (Central Magnetic Observatory (TsMO)). The scale
graduation was
1-33Y per 1 mm, the temperature coefficient PT;zz:'0.2y per 100
The stabili-
ty of the fundamental values was controlled first by comparing
the readings
of the variations obtained directly with the T-variometel to the
T-
Card 2//5
31659
S/570/61/000/018/003/004
quartz T-variometer B116/B108
variations calculated from the data of H- and Z-variometers. Since
February 1960, a nuclear precession magnetometer has been used at
the
TsMO'for absolute observation of TI its readings are used to
control
those of the T-variometer. The cheakings showed that the
fundamental
values of the T-variometer did not change within 4 months.
Advantages of
the apparatus are: independence of temperature and humidity of
air,
high stability of the fundamental values, and simple
construction.,: G. V.
Seleznev and S. V. Samokhvalov, mechanics, are thanked for
producing the
experimental apparatus, and N. D. Kulikov, quartz blower, for
adjusting
the quartz system. There are 3 figures and I Soviet reference.
Fig. 1. Seneing element for T-variometer. Legend: (1) Casing, (2)
quartz frameg (3) suspension, (4) ring, (5) prism, (6) beveled
disk, (73
rod, (8) slide with additional magnet for zero adjustment and
adjustment
of scale, (9) ring with guides, (10) nut*
Vri
Card 3~i,?
38244
S/169/62/000/005/066/093
D228/D307
"UT7HOR: Bobrov, V. N.
TITLE: Universal high-stability sensing element with a zero
temperature coefficient for magnetometers, variome-
ti~rs, and microvariometers recording any component of
the earth's magnetic field
PEMODICAL; Referativnyy zhurnal, Geofizika, no. 5, 1962, 3, ab-
stract 5G18 (Tr. In-ta zemn -magn. ionosfery i ras-
prostr.-racliovoln, AN SSSR, 18 ~28~, 19-01, 55-67)
TEEXT: Starting from 1957, experimental research on different ver-
sions of quartz systems for recording the vertical component of
the
earth's magnetic field was carried out in the quartz laboratory
of the.!ZMIRAN (Institute of Terrestrial Magnetism, the
Ionosphere,*
and Radiowave Propagation, kS USSR). As a result of 'his research
the author designed a high-stability sensing element with a zero
0
temperature coefficient for magnetometers, variometers, and micro-
variometers recording any component of the earth's magnetic field.
The article considers: a) A short history of the question, b) a
Card 1/3
S/169/62/000/005/066/093
Universal high-stability ... D228/D307
new magnetic suspension pystem for quartz frames, c) the universal
sensing element's design, and d) three ways of compensating for
''r
uhe U
perature of the quartz systems. The essence of the first
meth;d of obtaining a zero temperature coefficient consists of the
fact that the axis on which the magnet is mounted on the quartz
bar shifts to the side of the magnet's south pole for'a certain
distance 1; this distance is.chosen in such a way that the changes
in the susnension system's position, occurring at the expense of
the magnetic moment's change and the magnet's linear expansion,
are mutually compensated. This method is suitable only for the
ver-
tical comDonent Z and the total strength T of the earth's magnetic
field. The second, classical method of temperature compensation
is attained at the expense of an additional compensating magnet
and is a-pplicable for quartz systems, recording any component of
t'_,-.Ie earth's magnetic field with a normal sensitivity.
Theessence of
the third way consists in the fact that two antiparallei magnets,
whose summary field completely compensates the field of the com-
ponent being recorded, are fastenedon the quartz frame; the due
-selection of the temperature coefficients of these magnets
ensures
Card 2/3
S/169/62/000/005/066/093
Universal high-stability D228/D307
that the compensatiln-,i lCield's value remains constant when
the tem-
jerature changes. The alignment of the suspension system on an
witwisted thread in the zero field ensures the high (-0.1e sen-
sitivity of the system, which is of substantial significance in
the recording of microvariations. The data about the work of the
sensing element, established at the TsentralInaya magnitaya ob-
servatoriya. (Central Magnetic Observatory) for recording varia-
tions in the total force T have been previously stated in detail
(see RZhGeofiz, 1962, 4G20~. 12 references. Z-Abstracter's note:
Complete translation..-7
Card 3/3
42138
S/203/62/002/002/014/017
1046/1246
AMWOR: Bobrov, V.N.
TITIZ: Quartz magnetic variometere
PERIODICAL: aeomagnetizm i aeronomiya, v.2v no. 2, 1962,
348-356
TEXT: V.N. Bobrov's sensitive quartz elements (Ref. 1: V-N.
BoVrov-
Universal'nyi vysokostabil'nyy kvartsevyy chuvstvitel'nyy
element 8 nulevYm
temperaturnym koeffitsientom dlU magnitometrov, variometrov
i mikrovariometrovs
registruyushchikh 1yubuyu. sostavlyayushchuyu zemnogo
magnitnogo polya /A
universal high-stability sensitive quartz element of zero
temperature dependence
for nngnttorwters, variometers and microvariometers
registering any component of
.,eomapetic field/. Voprosy zennogo magretizmi. Tr. IMIRAN,
1961, no. 18
the -
(28), 55" are used in D-1 H-, Z-, and T-variometers
measuring variations in-
deolinationt in the horizontal and the vertical componentsp
and in the total
Sorce of the geomagnetic field, respectively. The readings
are highly stable and
are virl~xally independent of temperature and air humidity.
The device can be
adjusted-to work in steps of 0.5 rIMM over the on-tire span
of the magnetogram
(20 cm). As the variometers are dispensed with detailed
specification tables*
Card 1/2
Quartz magnetic...
S/203/62/002/002/014/017
1046/1246
they can be mounted with comparative ease in any magnetic
observatorT without
highly trained specialists. 7bere are 6 figures.
ASSOCIATION% Institut, zemnogo magnatizma, ionoafery i
rasprostranoniya radiovoln
AN SSSR (Institute of Terresirial Magnetism, the Ionosphere and
Propagation of Rndiowaves AS USSR)
January 9,-1962
X,
S/'.:8 2/002/003/019/021
1023 1250
ANTHOR: -Boh!!~V. ~11-
TITLE: -A dovice for menaurtnp the temperature cooffletents of
smnll trAgnets
PERIODICAL:- Geompgnotizm I Aeronomi-yas v,,2,, no.3, 19r.)2, 556-552
TEXT; A device for measitrinr, the low temperature coefficients /114
of
small mngnets should satisfy the following- renuirements: 1) measure-
ment of./4k of mn nets with a moment M 4 1 CGS; 2) measurement of
of tho order 10-9; 3) precise renults ob'fained rapidly& The main
---part of the inatrumont is a sensitivo alem6nt of q.tartz which Is
lo- VY_
cated In a hermetleall-.7 sealed enclosuras -14agnQtO Are used to fix
-
the scale and' to calibrate tho Instrumott, The sensitivity is gene-
rally l-f/dIvision,, but It can- be ralsed to 4 0&05 F/divl;ion- The
magnob investignted is irrmervod in cold, and afterwards In hot
water..,
The difference of readInLrs of the instrument 401 is recordedo
411 where A t la the differonoe of tompernture of the
-11 A-T hot ond 'nold water.
Card 1/2
S/203/62/002/003/019/021
1023/1250
A device for measul,ing.e
The measurement Is ver7 fn3t 10 3009 the time being determined IX,
by the. time it tFtka's the msgnet to roach thermal equillbrium with
the water. Because 6f the shol't time any changes In the
geom-ignotic
field occurring during the nioasurament can be neglected. The
changes
In those parts of the instrument that are expose to different tom-
porsituros can be estimated and the results corrected
correspondingly*
in future some (if the metnl pRrts will be replaced by parts made of
quartz* There ij I figure,, 3 references* '
AS S OC IAT 1011: Institut zemnogo magnatizma,, ionosfery i
rasprostra-
ner,iya radiovoln Akademil. nauk SSSR (Institute of
Terrestrial fllagnetizm, -Ionosphere and Radiawave
Pr.)pagation, Academy of Saienoos USSR).
OU-:11,4ITTED: January 190 .1962
Card 2/2
S/203/6'>/002/004/015/018
1046/1242
AIT11102: Bobrov, V.:.!.
TIT~'Z: Faults of -for registration of magneti'le
variations
PERIODICAL. Geomagnetizm i aeronomiya, v.2,,no.4, 1962,
767-770
TEXT: The cozmmon magnetic voriometers dre incapable of
reproducing
accurataly rnpid charifies in the geomgnetic field; there
is no ac-
curate method for aligning the instrument with the
magnatia-field, -
component in question; the readings depend- on air
temperature and
humidlt7; tho woight of ench graduation urlit-Find the 63ic
values
are nuite unstnble; the weight of graduation units depends
on the
ordinato. It is suggested 'Chat conventional varlomoters be
redlaced
with quartz variorieters (Ref.5: V.'N.Bobrov. Geomagn. i
aeronomiya,
.1062, 2, no.2, 348) whlah t4re free of all these
deficiencies and
thua groatly fricillik-Into P.,io oporationnI procedures
and the process-
ing of magnetograrm, '1'here are 2 figures.
Card 1/2
S//203/62/002/004/015/018
1046/'124'2
Faults of apparnVas used for registration ...
ASSOC IAT ION: Institut zermnoc, o nagnetlzma, ionoafery i
rasprostra-
neniya rrid.0voln AN SSSR (Institute of the Terrestri-
al Magnetism, the Ionosphere and Propagation of Radio
Waves, ".0" tiSSR)
SUBMITTED; Plarch 20, 1962
Card 2/2
BOBROVO Y.
---
Checking the accuracyof variometers in magnetio
observatorlei.
Geomag. i aero 2 noo4z771-776 J3.-Ag 162. (MM 15:10)
lo InBtitut semnogo magnetizma, ionoafery i
rasprostrananiya e.
radiovoln AN SSSR.
- . - (Magnetic variometer)
m
- ~ BOMM7 , * ~
I 1~
Single-component magnetic variation stations. Geoma i
aer.
2 no.5:1001-1007 S-0 162. %L 15:10)
1. Institut zemnogo magnatizma, ionosfery i
rasprostraneniya
radiovoln AN SSSR.
(Magnetism, Terrestrial-Observatories)
BOEROV V.N. kand.fiz.-matem,nauk
C,hmrtz geomagnetic apparatus. Vest.AN SWR 33
noo2s82-,84 F 163.
(magnetic variometer) (" '1412)
L-4'- 'Gw
ABMTACT: IZKMO-I,. a Tbrtable tbree-,ecmp=ent magnetic variation
statica
(xsVetognph)~ Ad desm-Abe&,by Its designer. Experi.--antal wdels
have been
used cn expeditions tothe Pamirs -and the Chukotskiy Penimuls.
several. statiow
vere v2v&ueed it 1963. ana saverai are now inopersti(m. Its three
r-in secticw
are: the station proper with tbree variomete-ze, the recorder, and
the ccntrol
panel (see Fig. I (a andb) of the Ruclosure). The D vwlometer is
also d----
BeAted Ata illustrated (see Pig. 2 of the Enclosure). The H and Z
varimeters
are briefly described. Assembly and 1twtallation of the MMI11AN-l
am explained.
The reewder is separate and usee 50 x 20 cm photopaper vith 24-hr
rotatim.
ffU control pawl proidaes for cbeckLng the accuracy of D arA R
var1cmetter =mt-
Ing viU respect to ro*=der amp=euta. The prInalpal A=erenm betwen U"
Cwd
ASSOCIMON: Institut Ze=wso wguet: Lzm, i=Gfery I mprostraueniya
radio-vo2n
Alt 8m (I-A-StAt-UlLe of -T-O_rfeBtrial Ma=etism, the I mmphere and
Ra4iojew Prop
agation, AN Ssm)
SUMM: 261iowU MMM 03 SUB CM; E59 EH
ODD
MD MW SOVs
ard
C
2/5
A.-
MU
a3it
ACCES81011 NR-~- 'AP50052o6 S/0203/65/005/001/0200/0202
AMHOR: Bobrov~ N.
TITLE, The IMIRATI-2 three-com'Dbnent magnetic-variation stationV~
SOURCE: Geomagnetlzm i aeromomiya., N. 5, no. 1, 1965, 200-202
TOPIC TAGS, MUnetic y on-:siaiigh. amagnetic field /17SPIMAN 22 /1
arkat 1. 1e
ABSTRACT: In 1962, the quartz lal~oratory of the Institute of
Terrest~ial Magnetism,
the Ionosphere, and Radio Wave Propagation developed the
TZMIRAN-2 magnetic-varia-
tion station for magnetic observatorles~ The apparatus is shown
schematicall 'v in
Fig. I of the Enclosure, It consists of a rectangular box I
within which there are
three housings, 2, 3, and 4, with quartz sensing elements for
recording variLtions
in declination D, the horizontal component H, and the vertical
compo-iient 2, of the
earth's magnetic field. In the front wall of the station there
are three sDherical
lenses ~ vith identical focal lengths. On the rear wall, there
are three bars 6
-with movable carriages 7 and compensating ra-agnets 8, which are
used for chang,4nr,
the zero point and the graduations of the corresponding sensinj-,
elements, Desicca-
tor 9 is mounted at the top of the device. The housing of the Z
variometer is
attached to the floor of the station, the D variometer, to the
side wall, and the
L~ard
Ell
5t-,t
CES
ION
IP
P
Toip --of Ur station i's con-
e v
var ometer, on a speciaL support,~__ The- #ig_~ ifi iation
-ed-iw--6U_CUi_ _--hat~_V M" D H i tin
--struet I -; W- -t1 beh'A d Z housings are installed within the
on -6 upper p
e- lanes of the-housings form three mutually perpendicular planes.
On the rear wall of the station, opposite the D housing, there is i
rotating mirror
10 with a magnet 11. During adjustment of the station, this magnet
is used for
conpensating the magnetic fields created by the H and Z sensing
elements at the
center of the D sersing element. on the bottom of the station there
can be an addi-
tional magnet 12 for compensating the necessary part of the field of
the horizontal
component H. Current is supplied through plug 13. The IZMIRAN-2 can
be adapted
for'recording magnetic storms, ordinary variations, and
micropulsations with gradua-
tions frola 50 to 0.2 T/=. Orig. art. has: 2 figures. (08)
ASSOCIATION Institut zemnogo.magnetizma, ionoofery i
rasprostraneniya radiovoln,
AN SBUR(Institute of Terrestrial "etism, the Ionosp~ere pg~k~Ldiq_J~
P ?raD
ti n
SUBMITTED- 051%r63 ENCL: 01 SUB CODE: ES
BO RE7 SOW: 005 OTHER: 000 ATD PRESS: 3216
9779-66. F-wr (i)/F-wp (e)/mq (m_)/Etc/E0 (b) wH
AGO NRs 4P5025480, SWROB CODE: MV0203/65/005/005/0892/0895
AUTHORS Bobrovg V. J1.-
Wi 61
ORGs Institute of Bar Wpatimt Ionositere anl Radio Wave Propagation.
-4,oVS5SJ(1
th
(Institut samnogo mapetisma lonoefery I. q q
rasprostraneniya raftovoln AN SSSR)
TITLES Throo-bouponent~magnetio,varlationaI field'station "Ismiran-40
i SOURCES '06omagnetimm I i6rovad V. 5p no. %'1965p 892-895
ya
TOPIC TAGds, electronics electronic equi
Inent,, ea;,th mamnett
ABSTRACTS the sitation "Ismiran - 40 consists of a rectanplars,
lightproof housing I
(1) j with Inside, booths -, (29 3 anrl 4)#-' corresponding D-j, N-t
and Z-varivmetersg
and' angle baracket Booths:wIth sensitive uart
0). sicensare located inside the
station so that their top surfaces form 3 root '7c
Mucany perpendicular surfaess.
The booths can be usled with or without stopping-devices* There Is an
inside light!--
1/3 UDGs 517,74
9779-66
AGO NRi AP5025480
Fig.~ 1. Section on line hat view from left.
(6), a cylindrical lens (7). -and speculas (8; in 3 pieces, and 9 in
9. pieces),
specula (9) can be moved along a stationary shaft (10), a big
speculum'n is fixed
on the back wall. Bearinim (12) pivot with f7ip (13) anA (14). The
equipment
includes also compensation magneta,(15 and 18)0.bars with carriers
(16and 17)p a
supplementary magnet (19)p a plug (20),, a'terminal (21), and a
recording device
(22). The desip of the OUmiral-40-station Is simple anti can be set
up quickly
for
production In series. In spite of its simplicity it is a versatile
station#
recording many different mapetograms either with an integrated
recorder or a
separate one, The advantage ofthe station ares easy parts
replacement* high
precision of adjustment; high reading~stabillty; independence of
temperature,and
humidity; low electric'energy consumption and simplicity of
adjuatwmt, Orig.
art.'bass 2 figures*
SUB CODE z .70
j09/ SMM DATE& llSspU/ .'NR RV SM 005/ arms 000
313
Donets Bs~.ln, L-It. i PO'. My-Je
LAOMOV, V. fl. (Ew~q)
BOBROV, V. P. (ENrR) -- "j"vE---rIQATI0N or THE
f-10-VEMENT or A;?TICLE-- ju rAcm;ii: Tv~L
CHAROING DEVICE PANS.p SUB 11 JUN 52, MOSCOW
FACHINE-T,-OL Aur TCOL INST Mcul
1. V. STALIN (Di?~,~VRTAYION FOR THr DEGREE OF
cAtiolvokir IN lcomIcAt. Scmimi)
I
SO: VECHERNAYA MO3KVA, JANUARY-J)ECE~IVER 19c"
~J~
BOERCV.V.P.
Compresseil-air Buction f or cAwt-iron chip
removal. Stan. i
instr, 26 no.5:11-12 IV 155. (Nuk 8:8)
Nachinery-Safety appliames)
BOBROV, V.P.
asum
Chip removing conveyers. Stanoi instr, 28 no.3:20-23 Hr
157.
(KLRA 10:5)
(Conveying machinery) (Metal cutting)
SOV-118-58-9-8/19
Candidate of Technical Sciences
AUTHOR: Bobrn~Zg
TITLE: Transportation Means for the Removal of Yetal Shavings
(Trans
portery d1ya udaleniya metallichoskoy struzhki)
PERIODICAL: Yekhanizatsiya trudoyemkikh i tyazhelykh rabot,
10,58, Nr n
pp 26-26 (USSR)
ABSTRACT: The removal of twisted metal shavings is a very
disagreeable
process. At the Pervyy 'Josudarstvennyy podshipnikovyy zavod
(First State Bearing Plant) this problem has been solved in
introducing special one and multi-worm transporters installed
at the automatic roller and ball bearing production lines.
For the removal of cast iron shavings and because of their
friability, one-worm transporters are used; multi-worm trans-
porters are recommended for steel shavings. The article gives
a detailed description of the shaving transportation schemez
The productivity of one shaving transporter amounts to 300 kg
of shavings or Approximately 3 cu m per hour. The total dis-
tance of transportation is 65.5 m. There are 4 schematic drawings.
1-Metals--Handling 2. Metals--Disposal
Card 1/1
BOBROV, V.P.
"Automation and Mechamization in Planning by Metal Working
Machine8j" in book
22wex Automation and Me chanization in Meebanical
Engineeripg, State Scientific-
Technical Publishing Office tor Machine Building Uterature,
Moacow, 1959.
TQI!F-a4-V-F-
"Transport Systems of Automatic Lineeoff in book Complex
Automation and
Mechanization in Mechanical E~~ineering State
Scientific-Technical Publishing
office for Machine Building Literature., Moscow, 1959.
SOV:13-59-3-5/a
28 1
41
A
:
Bobrov, V.P., Candidate of Technical Sciences
TITLE:
Automatic
Storing Device for Components (Avtomaticheskiy
nakopitell
detaley)
PERIODICAL:
Mekhanizatsiya i avtomatizatsiya
proizvodstva, 1-359,
Nr 3, pp 15-18 (USSR)
ABSTRACT:
The storing
device automatically performs the following
functions: receives
the components from the preceding
work bench and transmits the
parts to the following
bench, with equal or different speeds.
It can have the
form of barrels or chain conveyers, the latter
being
pr'eferred. The cabin conveyer can be manufactured with
two or four cylinders. The construction of the cabin
conveyer
is more complicated and expensive, but it
allows the loading
and unloading of the conveyer from
many points. It also allows
an increase in volume, al-
though not in height, which is very
important for saving
Card 1/2
production space. The four
cylinder storing conveyers
SOV218-59-3-5/U
Automatic Storing Device for Components
I
are used, when a big amount of components has to be
packed. The construction of this storing device allows
I* for loading and unloading it from one or many points, by
rolling or sliding of different forms of components.
There are 1 photograph, 5 graphs and 1 table.
Card 2/Z
25(l), 28(l)
SOV/118-59-9-3/20
AUTHOR:
Bobrov V.P., Candidate of
Technical Sciences
TITLE:
Automatic Supply of Metal-Cutting
Machines with
Materials at 1GP3 Plant
PERIODICAL:
Mekhanizatsiya i
avtomatizatsiya proizvodstva, 1959,
Nr 9, pp 11-16 (USSR)
ABSTRACT:
Automation of the 1GP3 plant has beer accomplished by
the
introduction of several conveyor lines performing the
movement of work pieces and their inter-operational
distribution
among separate machines. The general lay-
out of a conveyor line
is given in Fig. 1. Its opera-
tion comprises, on the whole, the
following stages: The
work pieces are taken from the bunker (1)
and delivered
by the lifter (2) to the conveyor-distributor (3)
from
where they go to the metal-cutting machines (4). The
inter-operation movement is carried out by outleading
conveyors
(5) located beside the machines. Fig. 2 shows
the charger having
150 cm in diameter; its operation
Card 1/2
consists, essentially,
of the following stages: The
M-7 4
SOV/118-59-9-3/20
Automatic Supply of Metal-Cutting Machines with Materials at
lGP3 Plant
parts are'taken from the bunker (8) by a conical ro-
tating device and brought to the tray (10) from where
they are taken by the claws (16) and transferred to
trays (17 and 18); thereupon they are hoisted by a
lifter and placed on the conveyor belt. The lifter is
shown in Fig 3. Distributing conveyor (Fig. 4) con-
sists of a case (1) inside of which there is a cavity
for placing of parts; under the case special trays
(4) through which the work pieces come to machines
are provided. In Fig. 5, a diagram of receiving device
is given; its purpose is to grab the work pieces and
to deliver them to trays. The speed of work pieces
movement along the conveyor line is determined by for-
mula Vi = V where v is the belt movement speed, and
is Y:A the coefficient of slip = o.9-0.92. The
length of conveyor is 35 m; required drive power - 1 kw.
Card 2/2 There are 7 diagrams.
B013ROV, V.P., lnzh. .
Disk friction-feed bine. Mashinostroitell no.10:8-10
0 139.
(MM 13:2)
(conveying machinery)
SOV/119-59-10-10/,19
AUTHORt Bobrov V. P.,' Candidate of Technical Sciences
TITLE: A Hydraulic Brake for Feeder Troughs
PERIODICAL: Priborostroyeniye, 1959, Nr lo, pp 19 -.2o
(USSR)
ABSTMOT: Hydraulic braking devices for workpieces moved by
their
-he
own weight in.inclined feeder troughs, are described in t
,Paper under review. These inclined feeder-troughs are
described generally in the introduction, and a construction
example is shown. The fact that'the workpieces moving under
the influence of gravity obtain too great speeds, and de-
formations of the workpi.eces occur, is mentioned as
the,main
fault. Belts used as brakes cause a stoppage of the
movement,
while the hydraulic brakes described here only slow down
the movement. Drawing of two brakes of that kind are shown
in figures,2 and 3, with the actual braking cylinders being
practically identical. The operating principle of these
hydraulic brakes is the following2 During their movement,
the workpieces meet a lever arm, Thich is connected to the
Card 1/2 Pistons in the brake cylinder.by a suitably
designed syztuzi
A Hydra.~I~_c Brake for Feeder Trou'yts SOV/119-59-10-10/19
of lever rods. The move-ment of the workpieces is trans-
mitted by the lever rods to the piston, which is braked by
the oil in the brake cylinder. The own weight of the lever
rods or a weight placed on the lever arm, always returns the
braking device back to its initial position. These brakes
showed good results when used in the automatic device 1GPZ.
There are 3 figures and 1 table.
Card 2/2
far
Zia
.64
tip
j g
A
Present State (Cont.)
SOV/4718
facturing processes 400
3. The prospects for effectively employing rotary-type
transfer machines 409
Ch. XV. Automatic Feeding Devices for Metal-Cutting Machine
Tools [V.P. Bob-
_rov, Candidate of Technical Sciences] - 412
1. Purpose of feeding devices, and their requirements 412
2. Characteristics of feeding devices and principles of
their design 415
3. Ways for improving feeding devices of metal-cutting
machine tools 425
Ch. XVI. Mechanization and Automation of Assembly Processes
in the Machine
and Instrument Industries [M.P. Novikov, Candidate of
Technical
Sciences] 428
1. The state of mechanization and automation of assembly
processes 428
2. Mechanization means for execution of assembly processes
4332
3. Examples of the automation of assembly processes "5
4. Mechanization and automation problems of the assembly
processes 447
Ch. XVII. Present State of Automatic Control in the Machine
and Instrument
Industries,and Trends for Development [V.S. Vikhman,
Candidate
of Technical Sciences] 449
Card 9A1
BDURDV V P"-*-~kahd.tekhn.naUk
Pneumatic trays fOr &UtOMAtic loading devices. Mekh.i
avtomsproily.
14 no.3:7-9 Kr 160. (MIRA 13-6)
(Conveying machinery)
S/ii8/6o/ooq/blO/002/008
A1611A026
AUTHOR: Bobrov~. V. P idate of Technical Sciences
~.- ~ t0_4Wd
TITLE: Transportation Systems of Automated Machining Lines
PERIODICAL: Mekhanizatdya i avtomatizatsiya proizvodstva,
1960A NO. 10, pp.7-12
TEXT: A general review is made of the design principles of
transportation
systems for automated transfer machine lines used in the USSR,
with a few compari-
sons with foreign designs. The review includes the
transportation system of a
piston machining line (Fig. 1) and of a line machining
shafts(Fig. 2); the trans-
fer principle of the "rotary lines" of L. N. Koshkin (Fig. 4);
of Morozov "group
line" (Fig. 6); the N. M. Knyazlkov system (Fig. 7); the A. A.
Sigodzinskiy
system (Fig. 8); and V. P. Bobrov system (author of the
article). The Koshkin
lines belong to the synchronous type, i. e. all working and
transferring drums
arranged in two staggered lines working simultaneously,
including the rotors
doing ancillary work (inspection), the entire system driven
from one transmission
shaft with bevel gears, or other combinations. The work rotors
of the Koshkin
line are cylinders with grooves on the outside designed for
holding tool blocks
(punch and die, or other). The shank of each tool is connected
to a roller that
Card 1/8
S/118/60/000/010/002/008
Transportation Systems of Automated Machining Lines A161/AO26
enters a curved groove on a stationary copying drum (6 in Fig.
4), so as to lift
or lower the tools when the work rotor turns. Blanks are fed
from an automatic
loading device into the grips of the first transfer rotor,
then they go into the
tool blocks on the work rotor, and the tool in the tool block
performs all its
work motions during one revolution of the work rotor. Then the
blank goes on to
the next transfer rotor and into the next operation, and so
on, The duration of
one operation cycle can be varied by the'-number of tool
blocks or positions on the
work rotor. Koshkin lines are presently used mostly for
stamping, inspection,
thermo-chemical and combination operations, and some for
machining. In stamping
lines with high pressure needed for punches, special hydraulic
heads are used.
These lines are stopping when one rotor in the system fails;
this is their draw-
back. But such lines can be set up from rotary machines
(Bullard-Continuous 128,
or "Krasnyy proletariy" machines) and a flexible transfer
system. The tool blocks
are easily replaced during idle runs, and attempts have been
made to automate the
replac;Wnt. A line may have machines arranged in-line (Fig, 5)
with non-synchro-
nous transfer, or in groups, with single machines working into
the hopper of the
next and with transfer by conveyers. The workpieces will
accumulate in the hopper
of a stopped machine, but the other machines need not stop.
'The ln.3 (1GPZ)
plant uses several transfer systems, the oldest of which is
the Morozov system
card 2/8
S/ii8/6o/ow/0io/bo2/6o8
Transportation Systems of Automated Machining Lines A161/AO26
(Fig.,6) with a multitray conveyer (1) running along the entire
line and having
branches to every machine; inside the trays the blanks are
moved by cross pieces
fixed between two endless chains and fall through holes on the
branch conveyers.
The transfer system is electrically blocked to prevent crowding
of a tray at a
stopped machine. Another system (at IGPZ) is the Knyazkov
system (Fig. 7) with a
conveyer and longitudinal trays above it and one lift (5)
between a pair of
machines (2). Another transfer system, by Sigodzinskiy (Fig.
8), has one way
leading to differentimachine groups. Its conveyer has separate
numbered zones for
each workpiece, and the zones repeat periodically. The loading
station of this
system (1) is a group of skip hoists with numbers for the
different workpieces
being machined. In its top position the feeder skips the blank
on the distributing
conveyer (5). (Similar lifts are placed between machines). The
distributing
conveyer is placed overhead and has a cam chain (7) and an
angle tray with cams (8)
moving the blanks; another chain (9) on top is moved
reciprocatively by hydraulic
pistons (10) and engages constantly with all lifts on the line.
The ratchet stops
(11) by which-this chain grips the chain (7) slip over the cams
in backward motion.
Blanks are fed to machines through a window with shutter in the
tray. This system
Is not fully flexible, too, and has to stop when the conveyer
stops and blanks are
out in trays. Still, it is relatively simple and suitable for
multiple-nomenclahim
Card 3/8