SCIENTIFIC ABSTRACT VASILCHENKO, V.N. - VASILCHIKOVA, V.F.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R001858720019-0
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
August 31, 2001
Sequence Number:
19
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
![]() | 3.28 MB |
Body:
"A" IL tCHIT-1,10 V IN Aspirent
"An Investigation of the Iddition of ~-,'oof in the
Weaving of Cloth." Cand Tech Eci, Moscow Textile lnst,
14 Oct 54. (VM, 5 Oct 54)
Survey of Scientific and Tochniml Issertations Defended tit TUSH
141,g,her Educational Thstitutions (10)
SO: Sm. No. 481, 5 May 55
n
VABILICHIMO, Y.N., kandidat taklinichookikh nauic.
, -,
he required strength limit of warp yarn. Tekst.prom. 15 no.12:
T
Tk ,r
~ w reau e
33-36 D, '55. (Tarn) (MA 9J)
VASILICHMIKO, V.N., kand.tekhn.nauk
Calculating parameters for the beating-up process. Stor. nauch.-
isal. rab. TTI no.3-.75-82 156. (MnU 11: 9)
(Looms)
VASILICHEITKO, V.F., kand.tekhn.nauk
CauseR of'streak formation in connection with beating-up, Tekst. prom.
18 no.6:25-26 Je 158. WDU 11:7)
(Weaving)
VASILICBMIKO. Vasiliy Nikolayevich; HAUMOV, V.A., retsenzent; AKSENOVA,
- - --l- l-AVI9---.-
a., red.; Kff q M,T., teklm.red.
[Investigating the beating-up process] Issledovanie protsessa
priboia utka. Moskva, Gos.nauchno-tekhn.izd-vo lit-ry po legkoi
promyshl., 1959. 157 P- (KIRA 12:12)
(weaving)
AKIMDVA, T.I.; VABILICHENW, V.M.
Selecting efficient parameters for fabric filling. Izv.vys.
uchob.sav.; toMi.tokst.prom. no.6:80-85 159.
- (MIRA 13; 4)
1. Thshkentokiytqkotil'Wy institut, Tashkentskiy tekotil'twy
kombinat.
(weaving)
. - f
-k F~, -, i T 0 ~ I v ~--, "', 'I I fI i ,
- V- k -, - - - - -1 - I '. vIF
VABILICHIM. V.N., kand.tekhn.nauk.
- -
Role of the ratchet in the weft beating-up process. Tekst.prom.
17 no-9:29-34 S '57. (MIRA 10:11)
(Looms)
f - , '-- - I ..
- F , -,/, ~, 11 - 14 ~ ~ -
-- - ;~-,i - -
VASILICHENKO, V.N.,.kand.tekhn.nauk.
Effect of loom speed on conditions of beating-up the
waft yarn. Tekst.prom. 17 no.12:21-26 1) 157. (MIRA 11:1)
(Looms)
VASILICHMMO, V.Y., kand, tekhn. nauk, dots,
' '
Iffect of fabric filling on heddle conditions of weft thread,
Izv. vys, ucheb, zav,; takh. teket, prom, no,1:122-'13.0 158.
(XM 11:5)
1. Tashkentskiy tekstil'W Institut.
(Weaving)
VASILIGHENZO. V.14.
Conditions for beating-up depending on yarn numbers. Ixv.vym.
ucheb.zer.; takh.tekst.prom. no.2:106-112 158. WRA 1:5)
1. Tashkentskiy taketillnyy Institut.
(Weaving) (Yarn)
VASILIGHM' MO Vasiliy Hikolayevich- NAUMOV. V.A., rateenzent; AKSKNOVA,
~T
' lekhn.red.
1 0 5,
[Study of the beating-up process] Isaledovanis protsessa
priboia utka. Mookva, Goo.nauchno-tekhn.izd-vo lit-ry po lagkoi
promyehlannosti, 1959, 157 P. WRA 14:1)
(Looms)
si-l" 'Icn5 n
S r c, d u c o r r i -a 1 -, , ~ -,, 4-n the 111hpcelinka ~7a:
j
propi. 0-D 3 . 0 PA I? - 12
n lai
L 1995-66 EWT(I)/W(m)/~W MI(h) IJP(c) JD
/BWP(b)/T
1ACCESSION DR: AT5oi3692
tW2613/64/OW/03Q/0078/OCST
'AUTHOR;-- Vagillcheuk0p, V- P.; UYbop Lo Ya. W
iTITLE: The electroluminescent capacitor aqfy; electric circuit element
44 %-r
1964.
SOURCE: All EstSSR. Tt Trucv, no- A
Iniya p0 Iyuminestsentsii (Research luminescence), 78-8T
ITOPIC TAGS: luminorp_jLn~PjfidTCtic materialp clectroluminescence,
llute,nescent capaoitorp electric circuit analysis
electro-
ABSTRACT: The purpose of the investigation was to study the electric character-
intics of the electroluminescent capacitors and to conatruct from the resultant
data a more accurate equivalent circuit of t:hia capacitor. To this end, the au-
thors conaidered the dependence of the gl(ni of the electroluminescent capacitor i
(brightness waves) on the exciting current and on the voltage. The luminor used
-was ZnS-Cu)CljAIj which produces green glow, and the dielectric was epoxy resin ED-~
or the epoxy lacquer EIID-096. The electroluminescence was excited with a ZG-2A audio
c
generator in the range from 200 to 5000 cPs, at voltages up to 200 V. A scliemati
diagram of the test circuit and the simplest equivalent circuits of the capacitor
are shown in Fig. 1 of the Enclosure. Criteria for the cancellation of the capa- i
t
citive component of the currents through the capacitor are established. An examiniva
Cardl/4
L 1995-66
ACCESSION 0: AT5013692
tion of the voltage-ampere characteristic confirms the presence of ap junction-a in
the grains of the electroluminor. It is concluded from the results that a more ac-1
curate description-of the electric characteristics of the electrolumineacent
capacitor can be obtained by the equivulent circuit shown in Fig. 2 of the Encloaurd.
The relative values of,the circuit elements are briefly discussed. "The authors
thank K.-S. K. Reb~g,~6d _Ta1_1xU * - a discussion of the results and for
supplying the capacitor samples." Orig. art. has: 7 fi~3ures and 1 formula.
ASSOCIATION: none
SUBMITTED: OlOctO4 ZICL: 02 SUB CODE: OP
NR REF SOVt 005 OTHER: 005
Carde4
:.q~, ~FAA1_,*1_,1;,C,~f1`-,,
IMP
�V-w
Own
L _1995-66
A-C--CE,SSlom NR: AT5013692
ENCLOSURE. 01
EM
ac.
C.
C.
R,
C
L
Fig. I. Diagram of circuit for the compensation op the capacitiye current
througli the electrolumineecent capacitor (left)
circu and Simplest equiValent
its of electrolumineacent capacitor,
L 1995-66 t
r - --- - - - - --- - I- - -- ~------ -I------,--- -
JACCESSION HRt AT5013692
.11
4
1, . EXCLOSM.'i 02
0
L 60L-1-1-65 E67 (m)/FWP (b' ir
ACCESSION PIR: AP50~~-,~
TITLE: Elec t ro luml ne ~s ce n -
_,'-i FI la p I ~t
;TOPIC TAGS: luminor, in u ~-'Jopt'-c Tot.,arlal, Plectr-jlumlnes-
_c s if ide
cence, sounding pulse effect
ABSTRACT: The aut~,,ors excitei ele~~',
by app 1 v a cz a w ~7
s -u a r r- w a -a.,.a
w
Card 1/3
r P: s -u I t sa rp F hc~vn
'Iva
Card 3/3
,r&lert circuit,
TOPIC TAGS: -lectrol-c-," I negcent apa,~Jtor. equ,
-.7- K
L 348648-55
ACCESSION Iffti Ap5oo5o56
~,-i~t4 r)n-A 4,- me chan s=. The ~se
pl,ylagg t~ie -ap:~-ltor aqMpLes
ABSOMMON: None
SU7N-,a=l' 03APr'6-'
HR REF SOV: 00 5
E!--r_ L 101
0r!7KKF
SUB CODE: OP, EC
t
.Fig v6it-wpere cbaracteri-stics- (left) -and equivalmt cjxcuit (right)
Off electrolu-dn---qcE--.t capac-itor
3
VASILIMMO, V.S.
New design of a water-spra7ior, device mounted in the quenching tover.
Koko i khim. no.11:33-34 160. (MIRA 13:11)
1. Zhdanovskly koksokhtmicheekiy zavod.
(Coke Ind-ftstry-Squipment and supplies)
BERMANT, Ye.Ye,; VASILICHENKO, V.S.
organizing the production control in plants. Metallurg 8 no.11:
34 N '63. (MRA 16.12)
1. Nachallnik laboratorii organizatsii proizvodstva i truda
zavoaa "Zaporozhstall" (for Bermant). 2. Zameatitell nachall-
nika proizvodstvennogo otdela zavoda "Uporozhstal"I (for Vasill-
chenko).
L 46582-66 E "IT (m)
-N,R-t- --
014531 SOURCE CODLs U1V.0O8l,/65/OOP/Ol9/MO13/MO14
AUTHORs Yusupov, A. N.
TITLE: Effect of structural and mechanical properties on swelling and stability
of gasosilicon mixtures
SOURCE: Raf. zh. Khimiya, Abs. 19M135
REF SOURCE: Tr. 41ma-Atinek. n.-i. in-ta stroit. materialov., 8b, 6(8)j, 1964p
202-207
T6P.*,G TAGS: cement, concrete,- plastic strengthp porous foam ceramic, surface
active agent
ABSTRACT: The main factors determining the stability of gaso silicon mixture in
the production of geso silicon concretel5dre the excessive pressure of hydrogen in
tho nuclear cells,, plastic strength, surface ten8ion and the height of the mixture
layer. The analytical dependence between the excessive hydrogen pressure in the call
the plastic strengthl the surface tension, the radius of the bubble and the pressure
of the mixture layer is determined. Authorn eummary.
SUB COM l1/ SUBM DATE: none
G~,d.
_
L
VASILICHENKC, V.V.
1'-*-4~,~li;.~~a~-"~~;,.k.~4~~,,~,,~ _r
Shade-type .double doors for drying chambers. Der. prom. 11 no.8:26-27
Ag 162. Off RA 17:2)
1. Rostovskaya-na-Donu bayannaya fabrika.
ANGARSKAYA, M.A.; VASWCHWO, Ye-A-;-'sCKOLOVA, V. Ye.
Hypoazotem-lo and diuretle effect of somo apecf,,ea of D-njn,,~~In7-a.
Rast. res. 1 rio.4:51a.-548 3 65 OVIF~. 119,.-1)
1. Miar'kcvskiy nauchno-issledovatallakly khlmikr,--V,,a--.9rxts-,V-
ticheskiy institut. Submitted Jmie 20, 1.965.
AUTHOR: - __Vazi1_'chenko, lu-Aj, Engineer SOV/110-59-3-13/25
TITLE: The Heat Transfer Coefficient of Radiators Cooled with
Transformer Oil (0 !,.oeffitsiyente teplopeive-dachi
kaloriferov pri okhlazhdenii transform tornogo masia)
PBRIODICAL:Vestnik Elektroprom;yshlennosti, 19599 Nr-3, pp 4,6-52 (USSR)
ABSTRACT: Now that the losses in a transformer may be as much as
1000 kW there is a great need for compa~~t air-oooled
radiators. For cooling transformer oil usee might- be made
of some of the galvani5ed steel radiators produced for
heating systems arA although the properties of such
equipment when operating with hot water or steam are well
known their use for the cooling of transformer oil has
not been studied experimentally. This article gives a
theoretical analysis of heat transfer from water and
transformer oil to the inner tube walls of radiator type
KFS and from its ribbed cooling surfaces to the air;
heat transfer coefficients are determined for the case
of cooling transformer oil. Thu formula recommended by
the All-Union Scientific Research Institute of Sanitary-
Card 1/4 Technical Equipment for the heat transfer coefficient of
SOV/110--59-3-13/25
The Heat Transfer Coefficient of Radiators Cooled with Transformer
Oil
these radiators is quoted.. The tests were made wliilst
cooling water and the range of validity is given.
A somewhat modified formula (2) is then given which, can
be used to calculate the heat transfer coefficient of the
radiator when transformer oil is cooled provided that the
heat transfer coefficient from the transformer oil to
the tube wall and from the ribbed surface to the air are
known. The first of these may be calculated from known
equations and the latter determined from results obtained
when the rad-iators are used to cool water. The
calculations are then made. It is first shown that
because of its higher viscosity transformer oil must
flow 1.75 times as fast as water to give the. same
Reynolcls number. Determination of the heat transfer
coefficient from tran former oil to the tube walls is
then quite straightforward. To determine heat transfer
from the finned tubes to the air, heat transfer
coefficients are determined for various rates of water
and air flow, the results of the calculations are given
in Table 2 and Fig.l. Heat transfer coefficients from
card 2/4 water to the tube wall are given in Table 3. Heat
SOV/110-59-3-13/25
The Heat Transfer Coefficient of Radiators Cooled -flith Trans'Lor--er
Oil
transfer coefficients from the ribbed surface of the
radiator to the air are given in Table 4 and from
transformer oil to the tube wall at an oil temperature
of 700C in Table 5. Then heat transfer coefficients for
radiators with various rates of air and oil flow are given
in Table 6 and are also plotted in Fig.2 for various
values of Reynolds number. From comparison of figures 1
and. 2 it is conqluded that for values of Reynolds number
greater than 10't the curves are practically the same
for water and tran former oil though, of course, it should
be remembered that the oil must flow faster to give the
same Reynolds number. The analysis shows that when the
speed of the liquid in the radiator tubes is low
Card 3/4 artificial turbulence occurs which improves heat transfer
The Heat Transfer Coefficient of Radiators
Oil
from the liquid to the walls.
efficient the oil speeds must
There are 2 figures, 6 tables
SUBMITTED: 23rd December 1957
Card 4/4
SOV/110-59-3-13/25
Cooled with Transfomer
For the coolers to be
be relatively high.
and 2 Soviet references.
TASILICHEM, Yu.A., inzh.
Coordination conference on transformer cooling. Vest.elektroprom.
31 no.6:78 Je 160. (KM 13:7)
(Electric transformers--Cooling)
VASILICHIKOVP N.V., kand. tekhn. nauk
I-
Study of the safety factor in usimg the radioactive method to
classify the operation of breaking and drilling hammezvo
lauch. soob. IGD n;126-131 '61. (MIRA .1614)
Boring machinery)
adioisotopes-Safety meaaurso)
R
Leonid Alekseyevich. doktor teklinicheskikh nauk;
Aleicsoy Yemellyanovich, karAidat fiziko-matematicheskikh nauk-,
SHTEM1930K. G.Yu., Inzhener, vedus~chijy redaktor-, Yjj~" "I - I
%imUmMinzhener, vedtLshchiy redaktor; TOLCHINSKIT, Ye.g., Inzhener',T_
red0-tor
CDovice for determining specific heat and coefficient of hw,
conductivity of materials. Resistance thermograph for isothe mic
charabers] 5--b-end dlLa opredelenlis udel'noi teploomkostt i koeffi-
taienta. teploprovodnosti materialov. Termograf sporotivleniis
dlia izotermichookikh kamer. Moskva, 1956. 12 p. (Pribory i stendy
Tome 4, no. 2-56-482) (IMRA 10: 10)
1. I4osccw. institut taklmiko-ekanomicheekoy informstaii.
(Heat--Transmission)
to" Yladim roviA; OSTROVSKIY, Alekoey Yemellianovich;
JaURIZOMM Y. Tgo t
1ASILICHIM, Z.H., inzh., veduBhchly red.; TOWHINSKOY, Ye.M.,
insho, r~6d.; PONCkM7, V.A., tekhn.red.
[Electron-beam seconds counter. Photoelectric recording seismic
inclinometer] Blektronno-luchevoi sekandomer. Seismonaklonomer
a fotoelaktricheakoi registratsiel. Moskva, 1956. 14 p. ( Pribory i
stendy. Tema 1. NO.P-56-495) (MIRA 11:5)
1. Moscow. Yeasoyuznyy institut nauchnoy i tekhnicheskoy informateli.
(Blectroaic instruments)
BUDZj5sxj-r,Ojeg 7dislavovich, kandidat tekhnichaskikh naukr; MORGUIJ,~Vn. Nina
Hikoloyevne, ~:endidat tekhnicheskikh nauk; SVXDS-O'HYFT.,, Wk-olay
ivanovich, kandidat tek-hnicheskikh ceuk; UkLITSCV, A-AY.. glavm~7
redijktor- VA Inzhener, rodnktor; 116Lit.!:Ai~;.I, 7.A-
tokhaic redaktor
[To HIIChK-1 (Cuntral. Scientific Research Iinstituto of ForrouR
metallurgy) tungsten-molybdenum thermocowle] Vol' f rouz-moli'cdeno-
vala termopara TsIIIIChH-1. Moskva, Akad.nauk SEWS11, 1956, 16 p.
(Pribory I stendy. Tema 4, rin. P-56-524) (HUA 10.-J0)
(Tharmocouples)
LIBEROV, Bo'ris Isaakovich, kand.tekhn.nauk;-XAS141CHENKO.,..Z.,R,, inzh.,
veduahchiy red.; SHIRNOV, P.V., lnzh., red.; PONAMAREV, V.A.,
takhn.red.
[Using high-viscosity cracking residue and cracking gas In
furnaces of cracking inst1lations] IspolIzovania vysokoviaskikh
kroking-oatRtkov I kraking-gaza v pechakh krokin-ustanovok.
Moskva, Filial Vaes. in-ta nauchnoi I tekhn.inform., 1956. 23 p.
(Informataiia o nauchno-isaledovatellskikh rabotakh. Tema 28,
no.I-56-198) (MIRA 10:12)
(Cracking process--Waste products)
Al
ff
PEPE-
NEUSYTIN, A.M., Inzh., ved. red.; SENKEVICH, I.V.* inzh.,, ved. red.;
V,&U-T,'Q;;NXO,Z.N.,inzh..,ved.red.;
MORDVINOVA.,N.P,,inzh.,,ved.red.;
SOROKINA,T.M., ekhn.red.; SMIRNOV,B.M., tekhn.red.
(Automatic control, remote control, and electric protection
systems] Sistamy.avtomaticheskogo i talemakhanicheakogo
upravleniia i zashchity. Moskva, Filial Vses. in-ta nauchn.
i tekhn. Informateii. 1957. 3 v. (Peredovoi nauchno-tekhnichs-
skii i proizvodstvennyi opyt. Tema 42. Nos. P-57-1/1, P-57-12/4,
P-57-59/11) (MIRA 16:3)
(Automatic control) (Remote control) (Electric protection)
VASICHEV, B.N.; IL'INA, V.A.; LATYSHIT, V.K.; PLISKIN, Yu.S.
Scintillation counter for recording X rndiation. Pr1b.i takh.
eksp. no.2:51-56 Mr-Ap 160. (MIRA 13:7)
1. TSentrallnyy nauchno-lusledovatel '0 kiy institut chernoy, metallurgii.
(Scintillation counters)
(X rays)
S/137/61/000/012/082/149
A006IA101
A
UTr
HORS: Vasichey. B_ K_,-Latyshev, V. K., Pliskin, Yu. S., Felinger, A. K.,
'Liii Echenko, A. A., Farfell, Yu. A., Lebedev, 0. P., Ivarov, V. I.
TITLE- A device to measure the thickness of hot rolled metal
PERIODICAL: Referativnyy zhurnal, Metallurgiya., no. 12, 1961, 13-14, abstract
12D92 (V ab. "Radloakt. izotopy I yadern. izlucheniya v nar. kh-ve
SSSR, vol. 3" Moscow, Gostoptekhizdat, 1961, 205, 206)
TEXr: An Instrument for measuring the thickness developed at TsN11IChM,
is based on the method of dynamic compensation. The device consists of a receiv-
ing~unit, a container of the measuring source, an-electric driven clamp, a feed
unit, a recording and an indicating unit. .,To control the operation of the device
a coarse-wedge sector is mounted. The device is employed in a thi,;.kness range
from 14 to 44 mm; it can however be designed for any range within 5 to 50 mm.
In the case of the given model the device is an indicating one. It is intended
to be incorporated into the programm unit, controlling the clamping screws of
the mill, as a correcting device on periodic-rolling mills, and as an indicator
in an automated reduction control system on continuous mills. The aacuracy
Card 1/2
S/137/61/000/012/082/149
A device to measure the thickness ... A006/A101
of the device Is + 0.1 mm on the whole range; the -operational speed is one
measurement per second.
N. Yudina
[Abstracter's note: Complete translation]
Card 2/2
S/137/61/oo)/6i I /09-55/i2l'
A0601A 10 1
AUTHORS: Vasichev, B. N., Valov, A. N., Pliskin, Yu. S.
TIM. Measurement of small radioactive metal siamples
PERIODICALi Referativnyy zhurnal, Metallurgiya, no. 11, 1961, 36, abstract
11.1247 (V sb. "Radioakt. izotopry I yadern. izlucheniya v. nar. kh-ve
SSSR V. 3", Gostoptekhizdat, Moscow, 1961, 210-213)
TEXT: The authors set forth the principles of construction of an apparatus
for measuring small radioactive samples of metal. Gas Ionization counters have
a counting efficiency of -j1% at a V-crjantum energy level of I Mev. When the
specimen is completely encompassed by the radiation detector (10 - 4'1L), an ir-
crease in the counting efficiency may be attained by raising the number of
counters encompassing the specimen, but this leads to a reduction in the relia-
bility of the apparatus and to an increase of background. Greater possibilities
are provided by the use of scintillation counters possessing a high counting
efficiency. One of the best scintillants is NaI, activated with Tl. 7-n the
apparatus worked out scintillation counters were used as the radiation dete.,tors,
utilizing large NaI(T.1) crystals (d - 90 mm, L = 85 mm) and (DDY-24 (FE-U-24)
Card 1/2
5/137/61/000/011/096/123
Measurement of' small radioactive metal samples Ao6o/Aioi
photoffraltipliers. The scintilhtion counting efficiency of the fjal(TI) orystal
of indicated dimensions constitutes 11180% in registering the V-radiation of Co60.
The apparatus uses a circuit with two 21L--counters with a disk-shaped specimen
between them and a delay for the pulses of the second 2c-counter. The use of
two 21-counters makes it possible to Increase the count from the specialen, find
the use of the delay - to select the upper threshold of' discriminatlon ~orre-
spording to an energy of 1.4 Mev. Sources of background in the scintillation
counter may be dark noise of the photomultiplier, radioa~2tlve lmp-uritles, the
natural radioactivity of the materials, and cosmic radiation. Various methods
of background-suppression are described. it is pointed out that the apparat"As
may be used for determining the activity of samples of metals oon-taining the
isotopes Co6O, Ru103 and others. To check the stability of operation of the
apparatus, the counting rates from a specimen containing the Co6O isotope were
measured for 8 hours. The photomultiplier was fed from a high-voltage reCtifier
of the counting circuit "Floks". The counter and the electronic blook of the
apparatus were connected to the power grid through a ferroresonant voltage-
stabilizer of the C314-220-0.5 (SEI-220-0-5) type. The apparatus elaborated
makes it possible to carry out the radiometry of metal specimers havirZ a specffi-~
radioactivity 5 times lower than that admissible according to (USSR~sanltary ncor.
rAbstracter's note. Complete translation] Z. Fridman
Card 2/2
Y
SInTVA YEV . V. S. VASILICILIKOV, F.Ya-,
Using graphs to solve some transportation problems. IZVOVYS*Uch.-
zav.; stroi. i arkhit. 5 no-4:109-116 162. (MIRA :L-,-:9)
1. Ku-ybyshevskiy inzhenerno-stroiteltnyy institut imeni ',Iikoyana.
(Transportation, Automotive)
FINKEL 'SHTEYN , 6h.P.; W,jv,
Density of the sedimentary -oc~-6 of -~he '),-,-khL:d&rya deprc-s34Tr,.
Neftegaz. geol. t geofiz. 164. kMf::;A 117.,61
1. Sradneaztatakly filial. Vae5nyumogo nauchno-leclodovat(Almkogo
instituta prlrodnogo gaza.
az=-V~-
VASILICHIKOV, I. V.
GODNEV, I. U., SVERDLIN, A. S. and IIASILICHIKOV, I. V. CA: 41-2243/1
J. Phys. Chem. (USSR) gQ, 8034 (1946)
Temperature dependence of the 0 index of powder
gases.
VASIlLHIKOV, I. V.
I. N. GODINEV, ZhFKh 20, 833-9, 1946
.1 ~j- --- 1. -,:_ , "
VASILICHIKOVP I. V.
GODNEV, I. N.' SVERDLIN, A. S., and VASILICHIKOV, I. V. CA: 41-22441
J. Phys. Chem. (USSR) 20, 803-9 (1946)
Temperature dependence of the 0 index of powder
gases.
MOROZOV, V.I.. VASILICHIKOV. I.V.,
SVERDLTN. A.S., GODHEV, I.N.
Molecules
Force constants and action coefficients of the formaldehyde molecule. Zhur.fiz.khim.,
16, No. 6, 1952.
Monthly List of Russian Accessions, Library of Congress, November 1952. Unclassified.
HOROZOV. V. I.. VASILICHIKOV, I. V.
SVERDLIN, A. S., GODNZV. I. N.
Formaldehyde
Force constants and action coefficients of the formaldehyde molecule# Zhur.fiz,khim,,,
16, No. 6. 1952.
Monthly List of Russian Aceessions, Ubrary of Congress, November 1952. Unclassified.
F-- interactiou of ths fam-
~d
S'."d ; ~
S
avo). Zhur. Fis. Kkim. 26, -M-5(IWa)--Fo"m C*nzU-
i'thl coca,. of jilterac6oo rc cAlcd. fros. tht vibratiotud
specua of ItC'Oil and PCOM 1. J. llikenuAn
S0V/ 13"t - 57- 10 - 19033
Translation from: Referativnyyzhurnal, Meta I lurgiya, 1957, Nr 10, p86(USSR)
AUTHORS- Anisiforov, V.P., Granovskiy, S.P., Vasil'chikov M V.
TITLE: Helical Rolling of Round Periodically Recurrent Profiles, Balls,
and Gears (Pope rec hno -vintovaya prokatka kruglykh periodi-
cheskikh profiley, sharov i s'hesteren)
PERIODICAL: V sb.: Ratsionalizatsiya profiley prokata, Moscow, Profiz-
dat, 1956, pp 296-318
ABSTRACT: The TsNI1TMash has developed a production process for the
rolling (R) of round periodically recurrent shapes. Appx. 10-
3016 saving of metal has been attained in this way. The R is
performed by three rolls, tapered or disc-type, at an angle-of
1200 to each other in the working stand of the mill. As the billet
advances, the rolls converge and separate in accordance with the
rh;;ne of a repeater guide, and the helical rolling process is per-
formed. The use of longitudinal tension on the billet makes it
impossible for porousness to develop in the axial zone, and this
is confirmed by appropriate tests of the mechanical properties
and structure. In addition, the fiber structure follows the exter-
Card 1/2 nal shape of the product. The R results in a rise in the
SOV/ 137 -57-10-19033
Helical Rolling of Round Periodically Recurrent Profiles, Balls arid Gears
mec han-Icall properties and this makes -it possible to increase the load on the
product.. A 2- roll bel-cal rolling mill with helical pass grooves is used to
produce balls 1-211 -,r, diam. for roller bearings, as well as the production of
40-80 n-im m,.I,'L3ng balls. These mills are analogoue to piercing mills for
tubing, When ased to manufa,~ture ball-bearing balls, the output capacity of
suc-h ~ m2ll ,5 3 t.,mes as great as that of a horizontal upsetter and affords
metal savings of 15 - ZO%. -in manufactu ring milling balls, the labor involved
is cut to a fifth or a s~xt~- in add--itior-, a desc ro-ption of 2 -industrial gear-R
mills is presented. Gear manufacture by R makes for better metal in the
gear ( rowr-, aE the labers of metal in the tooth are not cut but bent to comply
with the tooth profile The strength of the teeth is 50% higher than in milled
gears.
S. G.
Card Z/2
VASIL'Ci.!FOV V.
"Invesil-iaation of the "ethod of --~4d o~' tne leet- of 'jears an,4 Util~zatisn o--' an
Industrial IIJ11.11 l;'In Transport and Heavy "ach-ine Wilding, C'entrril ici Inst
of Technology and Vachine (TS111ITIlash), Moscow, 1953
(Dissertation for the Degree of Candidate of Technical 3ciences)
SO: Knizhnaya Letopis', No. 32, 6 Aug 55
OISOI a."mone," or Wheeb. A M. V_ VA411.
PhAriny. and &L im,
rich. I 111M' elt,
--rM -3-27. 1 frarisSIM tram Ve,#tnlk MmIt
V. 3e, p. 575
no. 3, Mar. 1955. p. SI-W; no, 9, Sept. 1955, p. 41-44.)
Production procm for the hat-miling of pars with a quality
mAircly satisfactory for triginvering purposcii. Etiagranis. graph.
USSRI Engineering - Metal workina
Card 1/1 Pub. 128 - 17/35
Authors I Kuztminp A. D., Cnnd. Tech. Se.; Vasillch~kov, M. V., Cand. Tech. Sc.;
and Barbarichp M. V., Engineer "NOW-IM61W
Title I Contact fatigue of the teeth of Pears made jpy hot rolling
Peric4ical R Vest. mash. 35/3, 53 - 56, Mar 1955
Abatract I An account is given of studies made of the microstructure of gear wheels
made by the process of hot rolling, a process which has enormously sr~eeded
up the production of these wheels. Tests were made by which it was sho-.m
that the surface toughening of the teeth of the wheels, resulting from the
plastic deformation of the metal during the rolling, considerab3y increases
the resistance of the teeth to fatigue, making them superior to teeth cut
on the mJ-11ing machine. Illustrations; graphs.
Institution
Submitted
V 153010- Inditstrial Pro-doction' o-f 'Cylindiical Ccars:by Ilot
AnIling. Ix oppa proinydifennoga prolevod-1ve fg-ilindriche.
Aikh ru I - tki. (Bus
_ jcj
sian.) A. D. ,Iykh Wen metedam gor;arhef proL. -
Kuz'rnin and A V. Vaiii'chikov. Wan& mwhifwt
roenM,,v, 35, no. 9,
Weav and sutngth tuts sbow that tho geay t"th of gea" thlu
Produced nre stiperfor to milled ones. I)iagrams, photograpb;,
table, graph.
- -M
kandidat takhnichookikh nauk; RARBARICH, M.V.;
2"mme-&Y, F.P.
Thread-rolling Jack screws, Avt. i trakt.prom. no-11:27-30 N 056.
(MLRA 10: 1)
1. TSentrallny7 nauchno-iseledovatellskiy institut takhnologii i
maohinostro.reniya. (Lifting Jacks) (Machine-shop practice)
PHASE II BOOK EUWITATION 494-11
Smirnov, V. S.; AniBiforov, V. P.; VaBillchikov, M. V., Granovskiy, S. P.;
Kazanskaya, I. I.; Kuzlmin, A. D.; Mekhov, N. V.; Pobedin, I. S.
Poperechnaya prokatka, v mashinostroyenii (Cross Rolling in the Machine-building
Industry) Moscow, Mashgiz, 1957. 375 P. 4,500 copies printed.
Ed. (title page): Tselikov, A. I., Corresponding Member) USSR Academy of
Sciences, and Smirnov, V. S., Doctor of Technical Sciences, Professor;
Ed. (inside book): Kamnev, P. V.; Ed. of Publishing House: Leykina, T. L.;
Tech. Ed.: Sokolova, L. V.; Managing Ed. of the Leningrad Branch of
Mashgiz: Bol'shakov, S. A., Engineer.
INTROIXJCTION
In this book, which is devoted to the study of cross rolling and helical cross-
rolling processes in the Soviet machine-bu-41ding industry, the authors discuss
very systematically and in detail the principles, theory, aud technological
aspects of roll forming of balls and gears as well as the rolaing of period-le
shaped stock.
Y3
Cross RollIng In the Machine-building Industry 494-11
The terms cross rolling (poperechnaya prokatka) and helical cross rolling
(poperechno-vintovaya prokatka) require a brief explanation here. By cross roll-
ing,, the Russians understand a rolling process in which two pe-rallel rolls re-
volve in the same direction, their longitudInal axes being parallel to the axis
of the work. The term helical cross rolling denotes P_ rolling operation between
cone rolls, the axes of which are slightly inclined to opposite angles, thus
producing a helical advance of the work. Die rolling in this case is a special
type o:e helical cross rolling in which helically grcoved rolls are used, instead
of plain tapered ones, to produce shapes such as balls,, rollers, annular shapes,
periodic profiles,, etc. The rolling of bearing balls is said to have already
replaced the ball-pressing method in the USSR, increasing produr-tivity 2 to 7
times, and saving 10 to 25 percen:k, in expensive aUoy steels. Gear rolling is
reported to be a current development project in the USSR. Rolled gears are said
to have been successfully produced to grade 3 accurar-y with a grade 7 to 10 sur-
face roughness. Methods for determining rolling forces, stresses, torque, and
power, based on modern concepts of the theory of plasticity and strengta of
materials, are discussed, and formu2as derived. All the methoft involved in
these rolling processes are discussed with great clarity, Fmd case histories and
specific examples are included. According to the authors, the mechanical
C=&WOIW
a/3
Cross Rolling in the Ylaahine-buildL-Ag Triiii t,-
y 494-11
properties of press-formed parts or of paxts me/.-hkaed frm paricd:L3 rolled stock
are considerably higher than those m-Az frm .!ownratitx Um jilr.~a rolled stock,
not to mention a 20 to 30 percent saving in meterial.
The development of the theoret-Ical prim1ples &~-A the tecla%alcglazZ processes
of cross rolling and helical cross ralling In the USSR is said to have been
carried on Intensively since 1942. The theory w&S developed by V. S. Sm4-=ov
on the basis of experiments conducted at the Urallskiy politeklLnIz-heskiy institut
(Ural Polytechnic Institute) and later &t the y politekhr-Icheskly
institut (Leningrad Polytechnic Institute). The development. of maihimery aad
equipment for cross rolling and helical cross ralling ws ampervised by
A. I. Tselikov at the TsNIIBWh (Tsentrallnyy nauabno-issledovatellskiy institut
tekbnolog:Li I maBhIaostroyeniya, - Central Scientific Research Institute of
Technology and Machinery). Some machine-building plants., e.g... the Gorlkovskiy
e,vtcmdbU'nyy zavod (Gortk4.y Automobile Plant), have developed cross-rolling
mills of their own design. The contents of tW-s book are reviewed belov.,
chapter by chapter.
C
3/3
SOV/122-58-6-16/37
AUTHOR: ~hikkolr, M-V., Candidate of Technical Sciences,
Volkov, M-.M-and-Barbarich, M-V., Engineers
TITLE: The Rolling-on of Teeth in the Fluted Pins of cotton
-spinning Machines (Nakatka zublyev riflen,7kh tsilindrov
khlopkopryadil'nykh mashin)
PERIODICAL: Vestnik Mashinostroyeniya, 1958, 14r 6~ pp 45-46 (USSR)
ABSTRACT: A process for cold-rolling the teeth in fluted pins for
cotton-spinning machines developed by the TsN!ITMASh
Institute is described. In these components, the flutes
have a varyin6 ~-Atch. The rolli-n- roller, of a diameter
which is a multiple of the coo-ponent diameter, mu5t have
teeth repeatinr several timcs the cycle of pitch
variation in the component. To avoid the need. for a
precise relation between several rollers, only one roller
rolls the teeth. The other t~,.,o in a 1-11-pp-rollor unit
clear the teeth and simaltaneotisly cu.6fdce-roll the neck
sections between the fluted len-ths of the pin. The
correct choice of the diameter of the flu-11-ed sections
before rollinF proved to be the main factor in ac~_ievinC
good accuracy. Tests carried out at different surface
speeds have shown the best speed to be about ) ralmin. The
Cardl/2 flute rollino roller was itself produced by a rollinS
SOV/122-58-6-16/37
The.Rolling-on of Teeth in the Fluted Pins of Gottcrsqpinnin,'~-
Machines
process from a master corponent. The latter was made of
ShKhl5 steel, hardened to 50-51- Rocevell U. The master
was compressed between 3 blanks of rollinC rollers. The
master has a tapered entry --ection and is drawn throur-h
between the roller blanks. These blanks were made of
0.45~ro carbon steel or of low-alloy medium carbon steel.
After the rollinC operation, they were heat-treated and
polished. The height of the teeth in the master and the
rolling roller exceeded that of the component by 0.2 mm.
The resultant -Dressure during the component rolling
operation was measured. nven rollin- flutes of 35 mm
length together with 2 plain neck sections of 75 mm lengths
each, the total pressure amounted to 6 tons. Without the
surface rollinG of the necks the pressure amounted to
4.8 tons. There are 3 figures.
Card 2/2 1. Rolling mills--Applications
VASILICHIKOV, 14.V.., VOLKOV, H.H.; NRYLER, B.A.
New techniques for making billeto for worm-gear cutters. Stan.i
inatr. 10 nn.l;!7-9 Ap 159. (MIRA 12:6)
(Gear-cutting machines)
1,
-4AWaCjiIxCy,m.v.; VOIEDVP memo
HDt rolling of long threads Y,th a coarse pitch on hotlow shapes.
Xuz.-shtam. proixv. 2 n0-11:7-10 N 160. (HIM 13: 10)
(Rolling (Wtalwork)) (Screw Vireads)
S/122/60/000/007/007/011
A161/AO29
AUTHORS: Vasil' chikpy,-IL-Y, Candidate of Technical Sciences; Barbarich, M.
-V.7 -Candidate of Technical Sciences; Kapitonov, I.M.,'-Engineer
T=: Producing the No4ikov Gears by Hot Rolling
0
PMUODICAL: Vestnik mashinostroyeniya, 1960, Nc. 7, pp. 46 - 49
TEXT: . The described experiments were undertaken to find out if the point-
contact Ni)vtkdv gears could be generated by hot rolling process used already in
the industry for conventional Involute profile gears. The load capacity of Novi-
kov gears produced by cutting has been studied at the Gear Department of TsNIITM-
ASh, and therefore same gear dimensions were used in the experimerylts with hot
rolling to compare mechanical properties. TeNIITMASh used special milling cut
tersjor Novikov pinion and gear wheel (Figs. 1 and 2, respectively), with dif-
fereXt tooth contour are radii. The hot rolling UkEMM-58 (TBKBMM--58) machine s
shown in a photo (Fig. 4) with a gear blank Installed betwee-n--UTe-bottom kind -
ing) rollers. Rolling on long blanks with subsequent cutting Into single gears
(as is practiced in rolling involute gears) was not possible because of slipping
of the blank on the standard indexing pinion. Slipping caused either a wrong
Card 1/2
Producing the Novikov Gears by Hct Rolling
S/122/60/000/007/007/011
A161/Ao2g
tooth number, or distorted teeth (photo, Fig- 3)- Success was achieved with sin-
gle gear blanks In the mentioned TBKM4-58 machine with a pair of indexing and
roughing rollers and a pair of sizing finishing rollers above the Indexing,
Blanks were heated in an annular induction heater (marked n2" in Pig. 4) to
1,100 - 1,1500C and moved into the bottom indexing rollers.("3") mounted on mo-
bile carriages. Then blanks with roughly rolled teeth were passed into the siz-
ing rollers ("4"), The outline of rolled Novikov gear teeth is shown in a dia-
gram (Fig. 5), where,line "I" Is the outline after roughing and line "2" after
sizing, and a photo (Fig. 6). With gears with 6.5 mm high teeth the total rolling
time in both roller pairs was 20 see; the heating took 40 see, the passing from
the roughing into the finishing rollers 10 see, i.e., the total production time
of one gear was 70 see. The initial blank diameter has to be smaller than the
finished gear diameter, for no metal is removed and the tooth addendums are form-
ed from metal squeezed out of the grooves. The article Includes details of hot
rolling process and calculation formulas for dimensions of gears with convex and
concave tooth outline. Rolled gear teeth had smooth and sound surface (finlsb
n6l'); the tooth metal structure was finely grained and dense,-# the outer gear
and pinion diameters error was between -0.10 and +0.15. There are 6 figures.
Card 2/2
S/162/60/OGO 101110021016
~l 6, /,Or 29
AUTHORSi Vasil cchikov,_k.1~,,_,_.Volkov I M.M.
TITLE! Hot Rolling of Long Large-Lead Thread on Hollow Work
PERIODICAL8 Kuznechno-shtampovochnoye proizvodstvo, 1960, No. 11, PP-7-10
TEXTs The VNIIMETMASh institute has developed a new method and a
mill for hot rolling of mine propping bolts with round thread. The rolling
process is called "poperechno-vintovaya prokatkall (helical cross rolling),
its essence is illustrated (Fig,, 3),, Up to now these bolts were cut. The
new method raises the product-11vity by 25-30 times, eliminates metal waste
into chip, and cuts the coat of a bolt from 6-7 rubles to 4-5. The first
mill is working at the Toretskiy mashinostroitallnyy zavod ugollnogo
mashinostroyeniya (Tort_zv Plant of Coal Mining Machinery). The article
includes the drawing of a roll (Fig., 4) and a calculation formula for the
roll width. Experiments were carried out with rolling on a mandrel and
without mandrel and it was stated that the mandrel had practically no
effect on the deformation process in thick-wall screws due to the increas-
Card 1/4
$/'L62/60/000/011/002/016
A161/1029
Hot Rolling of Long Large-Lead Thread on Hallow Work
ing inner diameter of the blank, but when the blank wall was not thick,
the mandrel was necessary, The rolling process parameters for the round
thread "136 x 32" and "130 z 32,~ on blanks of 30 F9JI (3OG9L) steel are
given. The experiment~illy established dimensions for cast hollow blanks
are? a) for 11136 X 32" thread - outer diameter (D) 123 mm and inner dia-
meter (d) 45 mm; b) for 'l-JO x 32" thread - D - 117 mm, d- 42 mm.. Blanks
are heated at the Tortsy plant in a fuel oil firing furnace, the thread
rolling temperature is 950 - 110500C. in order to facilitate the feed of
the blanks into the mill the blanks are bevelled on 30 mm length with a
200 taper angle (see Fig. 4 "ix"), Hot-rolled ateel blanks are used as
well. In this case they are of 40/ (40Kh) alloy steel with D - 90 mm and
25 mm taper.('O'K") with 150,, Axial ilongation of the blanks after rolling
is 8-10%. The metal in the rolled thread is improved comparing to a cast
structure; it becomes fibrous on the outside (Fig. 8). The rolled thread
surface is smoother than a cut surface and rolled bolts are easier to
retract in the mine. The rolling mill is not described. The dimeneions
Card 2/ 4
S/18"/'CO/000/011/002/016
A1617AO'J29
Hot Rolling of Long Large-Lead Thread on Hollow Work
and elements of the profile of the rolls are given. There are 8 figures
.and 3 tables.
Figure 3:
1_3
Card 3/4
S11821601000101110021016
A161/AO29
Hot Rolling of Long Large-Lead Thread on Hollow Work
Figure 8-
J0. 9
R
Figure 4-
4/4,
PHASE I BWK MCMITATION SOV/16044
Rokotyan, Ye. S.j Doctor of Technical Sciences, Ed#
Prokatnoye proizvodatvoj opravochnik (Rolling Industry; Handbook)
v. 2. Mosqowp Ketallurgizdat, 1962. 685 P. 8500 copies
printed.
Authorat P. A. Alcksandrov, Doctor of Tochnical Sciences;
V. P. Anisiforov, Candidate of Tachpical, Sciences; V. 1. Bayrakoyj,.
Candidate of Technical Sciences V, Barbarjp~~ Candidate
of Technical Scienceal B. P. Bakht`MOv-,-V-a-n-d-idate of Technical
Sciences Idec"'Id B. A. Bryukhanenko, CandAdate of Economic
a a
Sciences;tg. V. V~ascKERoV, candidate of Technical Sciencesj
A. I. Vitk -n-,Wo-t-o-Vo-f Technical Sciences; S.1 P. Granovskiy,
i i
Candidate of Technical Sciences; P. 1. Grudev, Candidate of
Technical Scienceal 1. V. Guninj, Enginearl tt.;Ya. Dzugutov,
Candidate of Technical Sciences; V. 0. Drozd,tandldate of
Technical Scienceal N. F. Yermolayev, Engineeil 0. X. Katsnellsong
Candidate of Technical Sciences; X. V. Xovpey, Engineer;
M. Ye. Migayenko, Engineer; N. V# Litovahenko#' CandUlate of
Te4hnical SoUnosol YU& N* Matveyev, Candidate of Technical
Card 1/14
4011ing In Idustry; Handbook ZOV/6044
sciences; V. 1. t1eloj3hko, Candidate of Technical Sciences;
N. V. Melchovp Engineer; A. K. Ifinburg, Candidate of Tech-
nical Sciences; V. D. Nosovo Engineerj B. 1. Panchenko..
Engineer; 0. A. Plyatokovskiy, Candidate of Technical
Sciences; 1. S. Pobedins Candidate of Technical Sciences;
1. A. Rrlymak, Profesoor, Doctor of Technical Scidnees
Edeceasedj; A. A..Protasov, Engineer; M. M. Saflyan,
Candidate of Technical Sciences; N. M. Fedosov, Professori
S. K. Filipov, Engineer tdeceaoed]; 1. K. Filippovp Can-
Aidate of Technical Sciences; 1. A* Pomichav, Doctor of
Technical Sciencenj N. Yu. Shifrin, Candidate of Technical
Sciences; E. R. Shor, Candidate of Technical Sciences;
M. M. Shternov# Candidate of Technical Sciences; M. V.
.Shurale*,'Engineerj 1. A. Yukhveta, Candidate of Technical
Sciences; Edo. of Publishing-Houset V. M. Clorobinchenkop
R* MO lubohik# and V. A. Rymov; Tech. Zdos L. V. Dobuzhinskaya.
PURPOSEs Thin hi%ndbooklis intended for engineering personnel of
matallurgicalland machine-building plants, solent1fle research
Card 2/1~
Rolling Industry~ Handbook SOV/6044
..16stitutesp a~d planning and design organizations. It may
also be used by students at schools -of higher education.
COVMIAC3: volura~ 2 of the handbook rovieuo problems connected
th the prcp&ration or metal for rollinj~,tha quality and
n~ality contr6l of rolled products, and designs of roll
passes In mar6hant mills. The following topics are dis-
cuscods procoosoz of manufaoturing-sedifiniahad and finished
rolled products (tho rolling of blooms, billets, shapeup beamop
rails, strips, vira, platen, ohecto, and the dratring of steel
viro), hot-dipped tin Plates, lacquered plates, floor plates,
tubes made by difrerent methods, and special typos of rolled
products, Problems of the organization of rolling operations
are rovicrod, and types of rolled products manufactured In the
USSR are shown. No pqrsonalities are mentioned#', There are
no references.
TA OF~ CORPMS:(Abridged s
Oard 3/ 14
Rolling Industry; Handbook SOV/6044
Ch. 58. ears and Coarse Threads
1
i
O
L
~
f =?
M
_
lc
~k A u d AA , V,,; 'I ft r br i a h,
a
s
0v
t~
~-V -
~V
~
60
Ch. 59. Manufacture of Rolled Wheels and Tires
(ig. YU. Shifrin;,)
578
Part XI, Ortanization and Planning of Rolling 607
Ch* 60o Organization of Work- and Remuneration. Management
of the Rolling Shop (I, A, Prlymak) 607
Ch* 61, Recording and flanning of Rolling Mill Production
(B. A. Bryukhahenko) 615
Part XII, Types of Rolled Stock
Ch. 62, Structural Steel (B, I, Panchenko) 619
Ch. 63. Steel Plates and Sheets (B, 1. Panchenko) 649
card 131/14
VASILIGHIKOV, M.V.; VOLKOVP M.M.; MEYLER, B.A.
Lateral-helical rolling of hobbing-cutter billets. Stan. I
instr. 34 no.11:12-14 N 163. (MIRA 16:12)
TSELIKOV9 A.I.0 akadendk; 11 -14,,V., kand. tekhn. nauk-
New advanced technology is tYe basis for the automation of 0
production processes. Makh. i avtom. proizv. 18 no.10t
1-4 0 164. ()CM M12)
fit, L d
fatrl- r~,--da frc,:n
tek5t. from. na.4:164-
t 65 -
VASIL'CHMV, N. V.: MAs. er Tech Sol (disa) -- "A n(rw mothad of lnvostUintinv
mining. machinery operating by blovs". Moscow, 1958- 12 pp (Main Admin of
Sol Res and Design organizations of the Gonplan IISSR, All-Union Sci Res Coal
Inst VUGI), 150 copies (KL, No 2, 1959, 120)
AUTHOR: Vasillchikov, N.V., Engineer SOV1122-59-1~-11128
TITLE: -itw-Maazu-fe-me-nT--oTDisplaoement by the Method of
Radioactive Radiation klzmereniye peremeshcheniy metodom
radioaktivnogo izlucheniya)
PERIODICAL: Vestnik Mashinostroyeniya) 1959) Nr 1+, pp 4-6-1+7 (USSR)
ABSTRACT: An installation is illustrated (Fig 1) and described in
which an air/vacuum hammer ram piston was covered with a
source of gamma radiation containing cobalt 60. A
scintillation counter consisting of a single crystal of
NaJTI and a photomultiplier (FEU-19m) were placed outside
the hammer in order to detect the ram displacement inside
the hammer so as to produce an indicator diagram on the
screen of a cathode ray oscilloscope. As the ram is
displaced, the intensity of irradiation of the
scintillation counter crystal changes, which causes a
change of voltage across a load resisuance. The voltage
is transmitted through a system of RC filters to the
amplifier of the vertical set of deflecting cathode ray
tube plates. The other set of plates receives its signal
from a strain gauge carrying membrane transmitter
Card 1/2 designed by the Institut Mashinovedeniya (Mechanical
11
SCV/122-59-4-11/28
The Measurement of Displacement by the Method of Padioactive
Radiation
Engineering Institute) AN SSSR. Although the curve of
the displacement detector is non-linear, it has a linear
working section. The time constant permits the
recording of events down to 0.1 millisecond duration.
For short stroke applications an external radiation
source located along the stroke may be preferable.
There are 2 figures.
Card 2/2
PHASE I BOOK MIPIDITATIOff SOV/4487
Akadeniya nauk SSSR. Institut mashinovedeniya. Seminar po teorii mashin i
me~hani2nov
Trudy, t. 20, vyp. 80 (Tran actions oi the Inatitute of the Science of Machines,
Seminex on the Theory of Machines and Mechazzism, Vol. 20, No. 80).
Moscow, 1960. 80 p. Errata slip inserted- 3,500 copies printed.
Editorial Board: I.I. Artobolevskiy (Rasp. Ed.) Academician, G.G. Baranav,
Professor, Doctor of Technical ScienIces, M.L. Bykhovskiyy Doctor of Technical
SciencesJ V.A. Gavrilenko, Professor, Doctor of Technical Sciences, V.A.
Zinov'yev, professor, Doctor of Technical Sciences, A.Ye. Kobrinskiy, Doctor of
Technical Sciences, N.I. Levitskiy, Professor., Doctor of Technical Sciences, N.P.
Rayevskiy, Candidate of Technical Sciences, L.N. Reshetov, Professor, Doctor of
Technical Sciences, and M.A. Skuridin, Professor, Doctor of Technical Sciences;
Ed. of Publishing House: V.A. Sokolova-Chestnova; Tech. Ed.: B.G. Tikhomirova.
PURPOSE: This collection of articles is intended for technical personnel interested
in the theory of machines and mechanisms.
C ard 14
Transacti=B of the Institute (coat.) SOV/4487
COVERAGE: The collection contains four articles submitted to the Seminar on the
Theory of Machines and MedUnisms. The foreword to the collection w" written
by T.I. Artobolevskiy,, AcaWcian, Scientific Director of the Seminar. Included
in the foreword are summaries of the four articles. References acccmpany three
of the articles. Ali references are Soviet., with the exception of one translation
from English.
TABLE OF CONTENTS.-
Foreword
3
Sklyadnev, B.N. Application of Chebyshev's MeViod to the Design of a Conical
Mechanism for the Measurement of Areas by a Light Beam 5
The author describes methods for determining optiam parameters of a
conical mechanism by.twing Chebyshev's theory,6f the optimum approxima-
tion of functions. The "conical mechanismVis a cone-shaped inp~rttneut
with three optical tubes and e, photomult6plier tub* . The naonical
mechanism" is used for constructing Vilse-counting devices for more
accurate measuring and checking of planefigures.
Card 2/4
Transactions of the Institute (Coat.) SOV/W7
J.Vasil, chh1kov N __ Meas=4-meat or Displacements by Means of Radioactive
Isotopes in Closed Container* Under Pressure
T,he author discusses the problem of recording linear displacements of
machine parts not connected with others (e.g., piston of an elee-tro-
pneumatic hammer).
Gerts, Ye. V., and G.V. Kreynin. Design of the Double-Acting Pneumatic
Piston-Type Actuator
The authors describe the method of designing (using dimensionless
parameters) a double-acting pnematic piston-type actuator working
with pressures of 5 -6 absolute atmospheres. The methods used in
experimental investigation are examined and a comparative analysis
of design and experimental data is g0eft. *
23
36
Lyudmirskaya, I.B. Application of Digital Computers for the Synthesis
of Four-Bar Linkage-Type Computing Mechanisms 64
The author emphasizes the importance of digital computers in making
it possible to develop new methods for finding the acceptable variant of
Card 3/4
Transactions of the Institute (Cont.) SOV/W7
a mechanism. Two methods of the synthesis of four-bar linkages are dis-
cussed and preparatory work for their solution by computers is described.
The author concludes that the method of the quickest triggering action
may be used to determine a kinematically sound mechanism.
AVAILABIZ: Library of Congress
'VK/wrc/m
Card 4/4 u-18-6o
IVANOV, Konstantin Ivanovich; GLAZLTNOV, Vcevolod Nikolayevich;
NADION, Mikhail Fedotovich (deceased); BROWUKOV, D.M.,
doktor tekhn. nauk, retsenzent; VASILICHlKOV, IT.V.p kand.
tekhn. nauk, otv. red.; KOSTOIIIYW,, A--.Y'a-.-,--redLizd-va;
LOMILINA, L.N., tekhn. red.
[Modern methods of hard rock drilling] Sovremennye metody
bureniia krepkikh porod. Moskva, Gosgortekhizdat, 1963.
191 P. (MLRA 16: U)
(Rock drills)
VASILICHIKOV', D.V,, rifarent
Prospects of mining diamods from the bottom of the sea off the coast
of South-West Africa (from "Diamond News and South African Jeweler,
noZ5 1962; "The Mining World and Engineering Record, no. 4560.,
19 Z. Gor. zhur. no.3:68-69 Mr '63. (MIRA 16:4)
Carcs
L lbb94--t6
ACCESSJON NM, AP4048460
chemical properticE are studied ior the first time. 'ILTkise stui~iieki sholwe-l that ;],T--,e Of
,hese. est:ers have propertieg as plasticizers and can b-e used with dolr.-inyl c.hloride,
6;
7,PT.Plr'l'4~-'-h-'llLfh nr)t-lf--- SOV (Institute of fletrocheinicai
Processes)
SUBMITTED: 19F(ib. 64 ENCL: 00 SUB CODE: OC
NO REF SOV: 009 OTHER: 000
2/2
Card
VABILICHIKOV, N.V.
Treasures of underwater storeroms. Priroda 53 m.2-.26-31
164. (MIRA 17:2)
1. Moskovskiy gosudar.,tvennyy universitet im. Lomonosava.
BUCHNEV Valerlyan Konstantinovich, prof., doktor tekhn. nauk,
tdeceased];
BROMIIKOV, Dmitriy Mikhaylovich,, doktor tekhn.
nauk; VASILICHIKOV
kand. tekhn. nauk;
ZEN, Georgiy Aleksandrovich; SHUSTOV, flikolay Vasillye,.rich;
IVLWICH, lzraill Izrfjylovichp inzh.j DFNlDYUKp G.P., otv.
red.; BURTSEV, L.I., otv. red.; KOROLEVA, T.I., red. izd-va;
OSVEYRIKO, V.G., tekbn. red.; PROZOROVSKAYA, V.L., tekhn. red.
[Fandbook on drilling'boreholes in underground workings]Spra-
vochnik po bureniiu shpurov i skvazhin na podzemnykh rabotakh.
(By] V.K.Buchnev, i dr. Moskva, Gosgortekhizdat, 1962. 271 p.
(Boring) (MIlU 15:12)
ACC NRi -AP6034007 -~6UIfCg-CO'DE:--Lii~/62i3/6'~/006/005/0823/0829
AUTHOR: Vasil'chikov, N. V.; Pavlidts._..Xqt_A~; Slovinskiv-Sidak. N. P.-
ORG: -InstituLe-of Or anD1Q,&y,__AN__55$R (Institut okeanologii AN SSSR); 4qscow State
.Univer6itY_.iM.j4. Vj_..Lomon_osova (Moskovskiy gosudarstvennyy universitet);
�Acentific_Res'earch Institute (Tsentral'nyy
nauchno-issledovatel'skiy institut chernoy metallurgii)
TITLE: Vanadium titanomagnetite pfacers on coastal beaches in the Far East
SOURCE: Okeanologiya, v. 6, no. 5, 1966, 823-829
TOPIC TAGS: geologic surveying, geomorphology, ocean floor topography, vanadium. I
placer, beach, MMF Pe 44-0ce.
ABSTRACT. The existing titanomagnetite placers of coastal beach moraine genesis
found in the Far Eastern USSR from large deposits of vanadium ore.. Placers of this
type have a number of'accumulative formations (with different titanomagnetite con-
tents) stretching in bands approximately parallel to the shoreline. Reserves of
this useful mineral in some of the placers have been tentatively estimated at millions,-
of tons. However, the regenerative ability of modern placers should be taken into
consideration. Owing to the looseness of the ore body and the surface bedding of the
deposits mining from such placers is comparatively cheap and simple. Orig. art. has:;
3 figures and 2 tables.
SUB CODE: OS/ SUBM DATE: O2Mar66/ ORIG REF: 007/ OTH REF: 003/
-ard _- 1/1 UDC: 551.351(571.6)
VASILICHIKOV, S.A., lnzb.,4 KROSMV, bizbe
'InvestigaUng the packing vapacity of light paaking !m a
flange joint* Ditmo i neft-o mashinostr. no-PI7-18 N 164
(MIRA 18s'O
L 04844-67 EVIT(l) -GI
ACC NRe AP7000249 SOURCE CODE: uR/0213/66/006/003/0519/0528
AUTHOR: Vasi I&Mtovj Ye. I.: Shumiloyd A. V.
Vchikov, N.
ORG: Department of Oceanology, lbsco%l State University Im. M. Ve Lomonosov
Obskovskiy gosudarstvenyy universitet, Kafedra okeanologli)
TITLE: Redesign of the 'Okean' hawser winch into a cable winch
SOURCE: Okeanologiya, v. 6, no. 3, 1966, 519-528
TOPIC TAGS: winch, connccting cable
ABSTRACT: The redesign of the "Okean" hawser winch into a cable winch has been
described In detail, accompanied by seven detailed diagrams and phtotgraphs.
Detailed directions are given for splicing the cable (a method developed by the
All-Union Scientific Research Institute of Geophysics); the diameter of the cable
fo all infents and purposes is not enlarged at the splicing point and there is no
change of the mechanical and electrical'characteristics of'the cable. The
redesigned winch and the mentioned splicing method have successfully withstood all
tests. Orig. art. has: 7"figures. rJPRS: 37,05Q7
SUB COM 13 / SUBM nATE: 08 Apr 65
Card 1/1 Ms 551.,46.o73, 621.866
VAUILI -h~A~Z Samenovich; SOLOV'YXV, N.I., red.; MONIKOVA, A.N..
tekhns red@
Division commander Shchors) Hachdiv Shchors; boavoi out'. Moskva,
oen.i-zd-vo H-va obor. SSSR, 1957- 115 P. (MIRA 11:2)
(Shchors, Nikolai Arleksandrovich, 1885-1919)
., Y.Yu.o SHORYGIN, V.A.; VASTLICHIKOVA., I.A.
IXORNIKOVA v
Growing calcite single crystals under hydrothermal cond-itims.
Rcst krist. 4892-94 164. (MIRA 17:8)
VASILICHIKOVA, S.Is
Comparative study on the improving action of chemicals on
soda Solonetz soils. Pochvovedenie no.6:49-53 Je 165.
(MIRA 18:11)
1. Tadzhiknkiy nauchno-issledavatellskiy institut pochvo-
vedeniya. Submitted Jan. 2, 1964.
" . r
, -, I , ) I ", I
VACTLICIT."OUA, ~r. " . YITTr' rj7 ,
Azot ',' Zlidkillh Produktak-h ~olvkcnscvf~niyr- Kr-shnirzkilkh
Goryuchiyr- -Slintsy, lo,?/;., 170 2,512 rc -~,23
SO:
Gory-uchiye F-lantsy ~* 1-0114-35, TiT .,-71
G .7 4
tll, TI 7-
Gazy 17n-i Tll ol-sov,-nlyp-
SO:
GoMichiye SlentFy ~' 10/74-35, TIT F71
A-
Vr,sj3:tch-lkOvR, V- F-; 7~-- I'
Fjziko-Khi,Acheslmya Khar,~kteristikR Kashpirskoy -;~n(A-y
Goryuchlye Slantsy, 1934, No. 1, 50
SO: Goryuchiye SlaritsY 1'0- 1934-35 TIT .871
.G74