SCIENTIFIC ABSTRACT KOZLOV, P. V. - KOZLOV, V.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000825830010-4
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Sequence Number: 10
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT


AUTHOR,
EW dVENT(l) ZEPF(n)-;)IT
AP6001879 SOME COM, LM/0190/65/007/012/258/2ii~
q it , 5rS*-- 4q I I s' -5,
Vasilevskaya, L. P.; Bak2jev, N..F.;.K0Z1ov' P. V.
ORG: none
TITLE: Effect of thermal history on the kinetics of spherulitic structure formation
SOURCE: Vysokomolekulyarnyye soyedineniya, v. 7, no. 12, 1965, 2178-2179
19/1 q 1 5-
,TOPIC TAGS: polymer structure, spberulite crystallization 4L
U
ABSTRACT: A study has been made of the effect of -the melt temperature (TO to 190C)
on the linear growth,of spherulit'es in p6ly(ethylene sebacate) 601. vt,,20,000;
mp, 75C). Crystallization was conducted under isothermal.conditions at 57C for
20 min. The results of the study~of polymer filmspecimens are given in Fig.- 1.
The drop inthe linear spherulite growth rate with increasing melt temperature indi-
cates that the molten polymer is a highly ordered system, and that the crystal growth
from the melt can proceed.not only on the molecular level but also by addition of
ordered aggregates of macromolecule.s.- Increasing the melt temperature leadew ap-
parently, to~ the breakdown of aggregates and to -a slow-down In the linear growth
rate of.spherulites. The nondependence of the growth rate on melt temperature at
1 tr." 4-7A A-1 .

L 9 86-66
ACC NRt ApOoI879

go -
F4
Fig. 1. Linear growth rate of spherulites
0 versus melt temperature

N M
JO
0 ~

Melt temperature, C
higher temperatures (1300 is, apparently,.due to the transition of the melt to a
state of maximum disorder. Orig. art-$ has.- 1figure., [Bo]
SUBICODE: 10 SUBM DATE: 1OAu965/ ORIG REF:' 003/ OTH REF: 004/ ATD PRESS:

o
l
r p
p

ACC NR: AP?003713 SOURCE CODE: UR/O 190 /67/009/002/0458/04?3
AUTHOR: Kozlov, P. V.
ORG: none
TITLE: Works of V. A. Kargih and his school in the fiold of high molecular
compounds (on the 60th anniversary of his bii-th and 45th anniversai-j of his creative
activity)
SOURCE: Vysolcomolckulyarny5ro soyedineniyal v. 9, no. 2, 1967, 458-473
TOPIC TAGS: polymer physical chemistry, polymer structure
ABSTRACT: The article sketches V. A. Margin's contributions to the field of hiF,1h
molecular compounds, in which he has been active since the --ge of 30, first at the
Physicochomical Institute im. L. Ya. Karvov Uiziko-~Miimichaskiy institut), then
from 1956 at Moscow State University im-. IT.' V. Lomon:Mv (Moskovskiy gosudarstvennyy
universitet), vrhoro he heads the Section of High 1-blecular Compounds of the Chamistry
Department, and most recently at the Institute of Petrochemical Synthesis, All SSSR
(Institut noftekbimichaskogo sinteza AN SSSR), where he is director of the Polymer
Structure laboratory (1-,boratoriya struktury polimerov). The principal trends in
the scientific activity of V. A. Kargin and his school are described independently
of the chronology of any paAicular research achievements and by classifying these
trends in accordance with the chief areas of polymer science. The follv--ing area's
Card V2

ACC NRt AP7008713
Are discussedt nature of tho polymor stato of matterl structure of amorphous poly-
mors, structure of crystalline polymers, polymerization processes, chemical proper-
ties of polymers, processes of dissolution of polymers and properties of their solu-
tions, and polymer electrolytes.
SUB CODE: . 07/ SUM DATE: none
Card 2/2

BARANOV, B.P., inzh.; KOZMV, R.A.
"' , ;
Iffect of the ki of current ised on the quality of antomati-
cally welded JoInts. Svarka 1:86-94 '58. 041RA 12:8)
(Electric welding-Equirnent and supplies)
(Weld ing-T e at ing)

AUTHOR: Kozlov, R.A., EnEineer 135-56-4-8/19
TITLE: Effect of "Welding Conditions on Hydrogen Content in 'I'Veld
Metal (Vliyaniye usloviy svarki na soderzhaniye vodoroda
v metalle shira)
PERIODICAL: Svarochnoye Pro'Lzvodstvo, 195a. Nr 4, pp 26-28 (USSR)
ABSTRACT: As iE~ known, one of the major causes of cracks in the weld-
ing of low-alloy and medium-alloy steels is hydrogen in
the weld metal. Th I drogen content continuously dimi-
nishes after weldine ZRaef 1,
9 22; therefore, the time
between the end of the welding process and the beginning
of analysia is 1-ery importa.0.. A method is described of
determining hydrogen content in seam and fused metal by
01pencil" sampleo ("karandashnaya proba") which were initial-
ly suggested by R,G, Raklimankulov in 1950. The "pencil"
samples were kept for 3 dayc in teGt tubes filled with
alcohol and fl-p- gazi collected in a tube was considered to
be hydrogen. The technology and results of the tests are
given in Tables I ~ .3 and illustrated by Craphi. Con-
clusionc are made thuT in automatic welding the hydrogen
content in fused ireta'_~ dependas on the welding -technology,
Card 1/2 the nature vf the ,,u7rent, the grade and calcination

135-58-4-8/19
Effect of Welding Conditions on Hydrogen Content in 'Neld Metal
temperature of flux, and in manual welding, on the technology
.of calcinattoa,, -.-he storage and packing conditions of elec-
trodes. Hydro.-en content in seam metal can not only increase
with increased arc voltage but also can decrease, depend-
ing cr. the grade *f flux. 1n manual welding the calcination
i-emperaTurrrs of electrodes ccnsiderably affecz the hydrogen
ccnten-~, ir lye"-'d i:j d m a t al .
Th,,Dr,~ are 3 talb'As. 2 gr.!.phs, 2 figures and 5 Soviet re-
ferences,
AVAILABLE: Libl-ary of Conf~reiqs
Card 2/2

25 (1) SOV/135-59-4-5/18
18 (7)
AUTHOR: Kozlov, R. A., Engineer
T IT LE: The Lffect of Hydrogen on the Formation of Cold Cracks in
'I'lelding Medium-Alloy Steel (Vliyaniye vodoroda na
obrazovaniye kholodnykh treshchin pri svarke 3rednelegirovan-
noy stali)
PERIODICAL: Svarochnoye proizvodstvo, 1959, 111r 4, PP 17 - 22 (USSR)
ABSTRACT: The article presents the results of an experimental inves-
tigation of the effect of hydrogen content in weld metal on
the formation of cracks in welded joints, at different
contents of alloying elements in the base metal. Chrome-
nickel-molybdenum steel of "MhN31,10 was chosen for the
study. Low-alloy wire 10GSIMT (steel E1581) and AN-42 flux
were used for automatic machine welding. Low-alloy elec-
trodes 48N-1 were used in manual welding. Full technolo-
gical data of the experiments with automatic welding and
with manual welding are given. The effect of hydrogen
Card 1/2 content was proved to be dependent on the carbon equivalent

SOV/135-59-4-5/18
The Effect of Hydrogen on the Formation of Cold Cracks in 'Nelding Medium-
Alloy Steel
in the base metal, and two graphs showing this interdepend-
ence were plotted (Fig. 6 and 7). These graphs are recom-
mended as a basis for calculating the permissible hydrogen
content in weld metal, and therefore the selection of
technological parameters. It was stated that in the case
of considerable alloying (carbon equivalent over 1~6)1
cracks may form even with low hydrogen content in weld metall
and more complex welding technology (with preheating, or
other measures) must be used in this case.
There are 2 tables, 5 photographs, 2 graphs, and 7 Soviet
references.
Card 2/2

82806
S/125/60/000/007/003/010
A161/AO29
AUTHORS: Kozlov, R.A.; Petrov, G.L. (Leningrad)
TITLE: Some Aspects of Welding With Austenitic Manganese-Aluminum Electwdes
PERIODICAL: Avtomaticheskaya svarka, 1960, No. 7, PP. 33 - 42
TEXT: Austenitic steel electrodes alloyed by manganese are since long be-
ing used in the USSR and abroad. The experiments described in the article were
undertaken to study the processes of recovery of silicon and carbon from oxides
in welding with electrodes containing a considerable quantity of aluminum. As
the ferrite content determines In a high degree the resistance of austenitic-fer-
ritic steel structure against hot crackings the ferrite content was kept on a
constant level. It was stated that to prevent hot cracking in steel with high
carbon content (0.68%), the alpha-phase content has to be raised to 4.7%. A
higher alpha content leads to abrupt drop of plasticity and cold cracking. The
effect of summary content of aluminum and silicon on the alpha-phase content in
weld metal at 19 - 21% Mn content is illustrated in simplified form in a diagram
(Fig. 8). It can be seen that the austenitizing effect of carbon in Mn-Al metal
is less strong than in Ni-Cr metal. To reduce the tendency to hot cracks weld
Card 1/3

82806
S/125/60/000/007/003/010
A161/AO29
Some'Aspects of Welding With Austenitic Manganese-Aluminum Electrodes
metal must have 0.5% of the alpha phase, and to prevent too high loss of plastic-
ity and '.toughness the upper limit of the alpha phase content must also be limit-
ed. This upper limit is at 3 - 4% for steel with high carbon content and 6 - 7%
for low-carbon steel. A new electrode grade has been developedcalled 9A-48"/18
(EA-48m/18), the composition nf which is not specified. As the industry cannot
produce welding wire with component contents within narrow limits, the coating
must be adjusted accordingly to the wire. The following summary conclusions were
made: 1) the quantity of silicon and carbon reduced in weld metal depends In di-
rect proportion on the quantity of dry residue of water glass and marble in coati
ing; 2) increasing carbon content in weld metal at constant alpha-phase content
raises the strength but reduces plasticity and t;.,k~ughness and hence raises the
tendency to hot cracking (pure austenitic weld metal with low carbon content is
sufficiently resistant to hot cracks); 3) raising alpha-phase content In austen-
ito-ferritic metal lessens hot orackinS, but higher alpha-phase content may cause
cold cracks; 4) manganese-aluminum electrodes produce weld metal with aluminum,
silicon and carbon content within comparatively narrow limits, and therefore the
coating composition must be different for a different composition of wire. There
Card 2,/3

82806
S/125/6o/ooo/ow/m/oio
A161/AO29
Some Aspects of Welding With Austenitic Manganese-Aluminum Electrodes
are 8 graphs and 9 references: 8 Soviet and I German. L~_
SUBMIIIED. January 11, 1960
Card 3/3

S/135/62/000/01 1/(.)o2/oo6
A0061A 10 1
AUTHOR: Kozlov-, 11. A., randidate of Technical Sciences
Tj'~-L7: lnvestigatLng the hydrogen brittleness of built-up metal
PI-7RIODICAT,: Svarochnoyc proizvodrtvo, no. 11, 1962, 10 - 13
LF/T: Results are prenentued of investigating the effect of hydrogen con-
tent upon the mechanical properties of built-up metal. Specimens with higher
hydrogen concentration were prepared by a new method. They were made of "pencil"
samples welded onto a groove in a cooled copper plate. To obtain specimens with
clil'fercnt hydrogen contents, electrodes were used whose coating moisture varied
all; "I re.;ult of' different roa.,;Um, conditions. The author studied the effect of
the hydrogen content upon the merhanical properties; the effect of the cooling
rate upon the hydrogen brittleness of the built-up metal, and the degree of ~1-
loying of the built-up metal upon the hydrogen brittleness. He obtained the
follo,.-iing results: At a hydrogen content in the built-up metal increased from
I
i to 7.3 cm3/100 S, the initial rupture work decreases by a factor of 10 - 12.
The 'Linal'rupture work decreases by a factor of 3 - 3.7. The maximum breaking
Card 1/2

S/135/62/000/011/002/006
Investigating, the hydrogen brittleness of... A006/A101
load is reduced by about 25r,,. At a higher hydrogen content the surface area
with a fibrous fracture is reduced. However, at a maximum hydrogen content the
100,5' crystalline fracture of the specimen could not be obtained. The elimina-
tion of hydrogen from the built-up metal by aging restores fully its mechanical
properties. By increasing the cooling rate of the built-up metal from 2.25 to
66 degrees/see at 5000C and at a nonstant hydrogen content, the initial rupture
work ir
sharply reduced and the maximum breaking load increases. At a cooling
rate as high as 66 degree/see and a hydrogen content increased to 9.0 CM3/100 g,
the inechanical properties of the built-up metal decrease abruptly; the initial
rupture work drops to zero and the fracture takes place in the elastic deforma-
tion z(,ne without noticeable traces of plastic deformation. At I - 2 cm3/100 g
hydrogen content and high cooling rates the built-up metal shows remarkable duc-
tile properties immediately after welding. An increase in the degree of alloying
of the built-up metal from 0.17 to 0.66%, referred to the carbon equivalent, re-
duces sharply the initial rupture work. The final rupture work increases at
first and then decreases slightly. There are 3 tables and 8 figures.
Card 2/2

ACCESSION NR:*AP4043440 S/0135/64/000/008/0012/0014
AUTHOR:Kozlov, R.A.; Candidate of technical sciences
TITLE: Effect of deformation rate and testing temperature on hydrogen
embrittlement of welded metal of the 1OCkNZNI-type
SOURCEt 5varochnoye pro~zvodstvo, no.-8, 1964, 12-14
1
TOPIC TAGS: hydrogen embrittlement, deformation rate, weld seam,
temperature brittleneas effect
ABSTRACT: The author has investigated the effect of the deformation
rate, and temperature on hydrogen brittleness of the weld seam by
uaing a raw method of preparation and testing of hydrogen saturated
specimons (Procedures for determination of hydrogen embrittlement of
~welds in metals, comp. 115varka" #3, Sudpromgis 1960). The results
ohow that the hydrogen embrittlement somewhat decreases with the
in creased rate of deformation. BuV6 even at high deformation rates
(impart bending of notched specimens) the hydrogen brittleness is
considerable. The brittleness appears at all investigated tempera-
tura3, from +100 to -196C. Lowering the temperature greatly increases
; Card 1/2

'ACCESSION NR! AP4043480
the tendency of metal to brittle fracture, the columnar fracture
becoming a crystalline one. Orig. art. has: 3 figures and 2 tables.
ASSOCIATION: None
SUBMITTED: 00
SUB CODE: RM
NR REF SOV: 006
ENCL: 00
2/2
i-Card
CrTHER: 001

ACC NR- AP7005678 (A) SOURCE CODE-:- UR/0413/67/000/002/0145~/Of49
INVENTOR: Kozlov, R. A.
....................... W-0-9~-
ORG: none
1TITLE: Steel for welding wire. Class 49, No. 190766
SOURCE: Izobreteniya, prgmyshlennyye obraztsy, tovarnyye znaki, no. 2,
11967, 149
TOPIC TAGS: welding',' welding wire, welding =464E I-T
Ak"Q I C;"o
ABSTRACT*- This Author Certificate introduces a steel'for welding wire which
improves the mechanical properties of the deposited metal. The steel
contains (%): 0.05-0.10C, max 0.7 Si, 6-7.5 Mn, 17-20 Cr,
17-19 Ni. 5-6.5 Mo, 0.7-1.2 V, 0.25-0.5 N21 max 0.025 S, and max
0.03 P. IMS]
ISUB CODE: ll..13/ SUBM DATE: 15A,1,40 ATD-PRESS: 5117
Card 1/1 669.151_786741292128 26124-194

KOZLOV, R.F.
High-stability source of constant voltage for measuring circuits.
lzm.tekh. no.3:18-19 Mr 160. (MIRA 13:6)
(Voltage regulators)

KOZLOV, R.M.
New school atlases. Geop. v shkole 24 no.4:29 JI-Ag '61.
(MIRA 14:8)
(Atlases)

qy,_Rostislav Polikarpovich;
GERASII-.OV, Vasiliy Ivanovich;-JJOZIt
. -, ...... .
PELESHUK, M.I., nauchn. red.; PATENOVSKAYA-,^ M.'I., red.
[Assembly mechanic for the equipment in coke by-product
plants] Slesarl-montazhnik po oborudovaniiu koksokhimi-
cheskikh zavodov. Moskvaj Stroiizdat, 1964.. 342 p.
(MIE1 17:6)

GERASIKOV, V.I., inzh.,- KOZLOV, R.P., inzh., spets. red.
[Installing the equipment of the by-product coke industry;
outline manual for the training of foremen and installa-
tion workers] Montazh oborudovaniia koksokhimicheskikh
tsekhov; posobie-konspekt dlia obucheniia brigadirov i ra-
bochikh montazhni4ov. Moskva, 1961. 158 p.
(KIRA 17: 5)
1. Russia (1917- H.S.F.S.R.) Ministerstvo stroitel'stva.
Upravleniye kadrov. Uchebno-metodicheskiy kabinet pri Vse-
soyuznom uchabnom kombinate. 2. Glavnyy tekhnolog Vsesoyuz-
nogo tresta po stroitel'stvu i montazhu koksokhimicheskikh
zavodov (for Kozlov).

KOZLOV, R.P.
Controlling silicoeis-cauaing dunt In layizV,, col-c ovenu.
13azop.truda v prom. 3 no.9:17 S '59. WMi, 13:2)
1. Glavmyy taldinolog troata Koksokhimmontazh.
(Coke ovano-Safety mamures)

KOZLgi, KI. V.
"Amilysis ()C th- Electricity Conslim-,tion )f 1',e-jjjjm,-C, jp-~bii eke t
Exot-iv.Joru witi) AC PL ~rl 1, izht~r ""'Ilic-ItAnn Dr, 'I roretxovsk
nier Sui ply."
Orl,,t, -),- La'nor Rod Bnnner "Ani.mT Inft. AmAenl Artler,. Dnqproratrovsk, 10 5
5
for the degree of CanrlHALP ~n
:30: Knl-.hriva 'letorls' No. 27, 2 julY 1955

'Nu
21
it
.4,
ip a,
or

J1

08
'

4
1
VA 4
.
8

h' ~a n .3
L; & A-
Ki :LIT rl .7)' ;002-2007

3/194 61/000/008/039/092
D20IX304
MTHORS: Dyr2ka, V.P. and Kozlov, ft.V.
TITLE; Synthc!:,iq of relay circuits of mining CLIS (STaB)
installations using time-delay relay
PERIODICA,L: Referativnyy zhurnal. Avtomatika i radioelelctronilca,
no. 8, 19GI, 47, abstract 3 V356 (V sb. Vopr. melethan-
iz. v gorn. prom-sti, iio. 5, 11., googortekhizdat,
1960, 103-113)
TEXT: The example of synthesis of the control system of a
one-way light signal in used for demoristratin~ the application of
the analytical method of synthesis of relay circuits with magnetic
delay (fixation) relays type Kr-,P~ (KDRF). It is shown that the
use of these relaya is of advantage in cases where short-time stop-
pages of power supplies arepossible. 6 references. f7j~bstracter's
note: Complete translation_/
Card 1/1

ACC N 6ooo633 SOURCE CODE: UR 0080/65/0,
-18/009/2002/2007
AUTHOR: Kbudyalcova, T. A.; Pavellyeva, Ya. I.; Kozlov, R, 'V.,
31 V-
ORG: qork Institute 111.1. jj. A. -11(]~ lov .0r, -r, .31(1
politelcb.nichaskly Lnatlt6~
TITI;C: Cbronocondiictometr1c analys-'s of- 1u irlTturfl of f-,1DIcrosilonne and
silicon tetrachloride
SOURCE: Zhurnol prlkladnoy khimli, -,, 36, i1n, Q1, 1961~, 2002-20,07
TOPIC TAGS: chemical ronnt-jon, -n 11 n r i r) a i I i c , i ~c c-r~ -~~ o 1) t iorr, n 1. cheti-t n, 0 1
n a. -,:L r3
a
17 -
ABSTRACT: In the case of a mixture of If.91CI-, ono SiC11,,, the h-
ysis
reaction procoods according to the ojj,,w1.Tfg-,qchejTje-
11.~Iiq:i~i M011
For tho analysia of' guch n Mxfmrp, Ulf)
on chronoconductomotric tlLratlon with hydroohloric ncidl, b-T:i
the fo7mation of sodiumi aceLate (JurinF tho hydrol-yald f)-,
SiC14, 3'odlum P-cotato roacts with iqdrochlov.ix acld in
Card A6.,28-1

XCC NR- Apwoo683
proportiona. The ovorall. reaction u-A-~!d -f'Qr ot' thn
following:
As a result of the reacticn, from one gram o tz,~~,ce rive
formed 5 gram moles of hydrochloric -nej~j. -,)-I tllf-, c)VOr_-~-Li - f4 t t;,, t, r ,I
I gram mole of SICI 91 vos 4 E.:ram molon of hydrochl.erlc aclld,
determining the amo4nt'-of b7drochloric acid flovraed In tho o~veraI2 ,,, P P. c -
tion, It Is possible to deteri,~Une the, compo.,vitton of t-f' from,
the amount of oxcess hydrochloric acid, It 113 ciall.med that Hie rrclpoa~,d
metbod of analysis can be used for the r.;nalys:1-i ol' ool~-,red flr~f, turbid
lndL),Stri&l inixtures of trichlorosilp.tia end tsJ1.1con
arta has: h. formulas, 1 figure, and Lablo:i,.
SUB CODE: 07/ SUB14 DATE: 05Apr63/ ORIG R" 016/ 0- 15 0

BC;Gc)YAVL-vN.:;Kl'f. inzhener.
Production developments at the '4oscow Trannformer Plant. Vest.elektroprom.
27 no.7:4-11 JI 1~6. (IMRA 10-8)
I.Moskoveny tranoformatornyy ~;avod.
(Electric motor~;--Vlbration)

KOZLOVI S,
ISM-acale investigatift of deformations in an anchored
sheet piling. Ybr. flot 23 no.9t4O-41 S 163. (MIRA 3.62 11)
1. Starshiy lnzh. Leningradskogo instituta po proyektiro-
vaniyu morskikh portov i sudoremontrqkh predpriyatiy.

GORPENYUKY H, A.; KOZLOV, S. D.; URBANOVICH, S. S.
KPI electrodea for the bard facing of cutting tools b7 the
submerged are method. Avtom. svAr. 15 no,11:66-:70 N 162.
(MIM 15: 10)
1. Kiyevskiy ordena Lenina. politekhnichoskiy institut (for
Gorpenyuk). 20 Kiyevskiy instrumentallno-mekhanicheskiy zavod
(for Kozlov, Urbanovich).
(Hard facing) (Electrodes)

- KO'"7LOVY S'D*
Batc~~ produ:~L-Lcn of cold weldLng Avtom, svar. 17 no.5.-
87 14Y 164. (MIRA 17911)
1. Kiyevskiy Ino tv, mental tw-mak-haniche skAy zavcd.

Ll
AUTHOR: Kozlov, S.F.
26782
S/1 17/6 1/ooopog/004/004
A004/A 10 1
Mrrra
New milling cutters for machining aluminum and other light alloys
~,IERI:OD---CAL-Masli~nostroi'uelf , no. 9, 1961, 35
Mvn
_: Thc author points out that for machining aluminum and other light al-
.oys high efficiency cutting tools are necessary which ensure a high labor pro-
6,_-c.,1,ivIty and quality of the parts machined. Several years of experience in
machining aluminum and other light-alloy parts of complex shape have shown that
the milling cutters having two carbide-tipped teeth of curvilinea
r shape per-
fo-.-n extremely well In terms of maximum feed, cutting forces, adhesion of chips
to the tjol surfaces, heat generation, and surface finish. The extensive use
of 5uch cutters at plants of the Leningrad Sovnarkhoz has proved their high ef-
ficiency. For example, in machining Silumin, the feed was increased by a factor
of 2 - 4 as compared with that for standard milling cutters having flat tool
Increasing the feed by 100%, the power consumption was lower by 10 to
W%, while the sticking of the chips to the tool cutting surfaces was completely
eliminated. The high surface finish obtained.with these milling cutters made it
ca-rd, 1/2

mllling cutters ...
26782
s/117/6i/ooo/oo9/oo4/oo4
AOo4/Aiol
to 61soenst, with such operations as scraping, grInding, lapping, etc.
Tiillng cutt-ers of the type discussed with cast bodies 1)0 - 200 mm in diam-
are -:!mD!er and less costly to manufacture than standard milling cutters
m'lllng hr-ads. There are 3 figures.

A~: 77777., -
L 17404-66 LWMANTWAMNeVi LJP(c) WH
ACC NR: AP6003761 SOURCE CODE: UR/0181/66/009/001/0003/0008
AUTHOR- Konorova, Ye. IA. Kozlov,~ S. F.; Vavilov, V. S. YIK
;fORG. Physics Institute im.P.N. Lebedev, AN SSSR, Moscow (Fizichesidy institut Alle.
MR)
1,441
TITLE: Ionization currents in diamond during irradiation by electrons with energies from
500 to 1, 000 Rev.
SOURCE: Fizlka tverdogo tela, v. 8, no. 1, 1966, 3-8
TOPIC TAGS: diamond, Ionizatt electron bombardment
on counter, impact Ionization
ABSTRACT: Earlier Investigations have failed to supply unambiguous conclusions concerning
the counting mechanism of diamonds, It is essential to establish the effectiveness of
high electrical fields and to estimate the lifetime of carriers in natural Soviet diamonds.
Consequently, using an electrostatic- accelerator supplying 10-6 to 10-i-seo-long single
and periodic electron pulses (rise time.10-7 see), the present authors showed that with
fields above 103 V/cm there Is a departure from linearity In the relationship between the
product of the drift velocities and the carrier lifetime, and the magnitude of the field (see
Fig. 1). The interpretation of, the results is based on the theoretical re 'sults of A.G.
Re V1 (Phys. Rev. 94, 526,1954) and B. 1. Davydov and N. M. Shmushkevich (UFN, 24,
caA -Z-

0404-66
C
CNRt "60037151
~
Fig. 1. Volt-ampere characteristics
rel. unitsl~ for oneof the samples th ele t
Wi c ron
energies at 500 kev.
0 4 6, "r 'V;
.. ..... V/cm.
19, 1939). The quantitative results are Infair agreement with the theory. It is shown that
the lifetime of electrons in natural diamond is 10-10 to 10-8 see, and for nitrogen con-w
centration above 1019 cm-3 the lifetime is determined by the N content. . Nitrogen
concentration was detemined by the-absorption coefficient of the 7.8ft wavelength. However,
Card 2/3

KOZbOV Sidor Fedorovich; PAAtUKEVICH, Aleksandr Ivailovich; KITSIS, M.S.)
I.S., red. izd-va; BELOGUROVA, I.A., tekbn.red.
[Hard-alloy cutting toolo for the machining of light alloyo]Tverdo-
spla"ye'rezhxiohchie Instrumenty dlia obrabotki legkikh aplavoy.
Leningrad, 1962. 22 p. (Leningradskii dom nauchno-tekhnichaskoi
propagandy. Obmen peredovym opytom. Seriia: Mekhanicheskaia ob-
rabotka metallov, no.25) (MIRA 16:2)
(Metal-cutting tools)

BOYKOV, B.V.; KOZLOV, S.O., redaKor; KARTAKINA, H., takhnicheek-ty redaktor.
rFiyinp, machinnfil Letatel'rore mashiror. Moskva, Izd-vo Donaaf, 1953,
154 p. (MLRA 8:10)
(Airplanes)

YERDEYEVAp SI.; YAKGVLEV# V*Bo; CHESNOVAj L.Ve; SHLYKOVA, S.A.,,_XQZLOV, S.G.;
KHRM-IOV, K.K. (Kiyev); TIGROYAN, S.T. (Yerevan); KROTIKOV, V.A.-'(j~-niff&ad)
In the Soviet National Association of Historians of Science and
Technology. Vop.ist.est.i tekh. no*10:180-187 160. (,',URA 14:3)
(Scientific societies)

~_' ~ C e). - -j- ~C 6z
SOKOLISKIY, Viktor Nikolayevich; IMLOV, S.G., prof., otv. red.;
BERKOVICII, D.E., red.izd-va; SIMCHENICO, G.N., tekhn. red.
(Solid fuel rockets in Russial Rakety na tverdom toplive v
Rossii. Moskva, Izd-vo All SSSR, 1963. 285 p.
(MLRA 16:12)
(Solid propellant rockets)

'c
BLAGOIII-JOVOV, A.A., akademik, red.; GRIGO'OYAN, A.T., dol-,tcr fiz.-
mat. naulk, red.; IDUSHYR., L.S., doktor tekhn. naul-, red.;
!:0,!N(jT,9T'YANOlKIY, A.A., tloktor fiz.-mat. nauk, r-1--O.;
j~WZLOV, S.G., prof., red.Ldeceased]; ~MOLOVA, "I.A., kandd.
teki-In. nauk, red.; SOKOLIS11Y, MI., kand. teklir..nauk., red;
rTZ,GltGV, A.S., kand. tekhn. naul-, red.; CHEKANOV, A.A.2
kancl. teklm. nauk, red.; 'r-lami. tekln. nauk,
rea.
lFrom the history of rocket engineering] Izz istorii raket-
noA. tekhniki. Mosk-va, Nauka, 1964. 254 p. (VIHA 17:8)
1. Akademi-ya naulr SSSR. Institut istorii yest~,stvozpianiya i
tekhnill,i.

KOMM, S.I., inzh.
Using electronic computors in developing technological proceoses
in tho manufacture of machinery. Vest.mauhinostr. 42 no*5:58-61
I-V 162. (MRA 15:5)
(Electronic calculating machines) (lkchinery industry)

I . I. T.; K021OV, S. I.
.L
2. U~;-:R (600)
4. Arctic Fox
7. 3tan-4ards for I'luf; for p-alts need revision, i wer. 6, 1.70. 2, 1'-53.
9. Monthly List of Russian Accessions, Library of Congress, -pril -1953. Unclassified.

KOZLOV, S.L(Yevpatoriya)
Immediate results of streptomycin therapy in osteoarticular tubercu-
losis in children. Klin.med. 33 no-12:58-66 D 155. (MLRA 9:5)
1. Iz Tevpatoriyokogo teentrallnogo detskogo klinicheekogo sanatoriya
(nach. kandidat meditsinskikh nauk A.P.Gushchin)
(STREPTOKTCIN) (BONES- JTUBJIRCULOS IS)

XOZIOV, S.I. (Yevpatortya)
Yunctional outcome of antibacterial therapy in octeoarticular
tuberculosis in children.[with summary in Anglishl Frobl.tub.
35 no.2:27-32 '57. (MIRA 10:6)
1. Iz TSentrallnogo klinichaskogo detakogo kostno-tuberkuleznogo
sanatoriya (nach. - kandidat maditainskikh nauk A.P.Gushchin)
(ISONIAZID, ther. use
tuborco,,Osteoarticular in child., with PAS &
strept0 cin (Rua))
(PARA-AMINOSALICYLIC ACID, ther. use
tubarc., osteoarticular in child., with isoaiazid &
streptomycin (Rus))
(STRMOMYCIN, ther. use
tuberc., oBteoarticular in child., with isoniazid
& PAS (Rua))

~>er- -C 11
__p_qpv. LggAfovich; KMDDSOVTSBY, N.G., rodaktor: XDGAN. F.L.
MZLOV, So --7
'VeGh-n =cheskiy'r'sdaktor.
[Repair of wooden bridges) Remont derevianrvkh mostov. Moskva.
Kauchno-tokhn.lzd-vo avtotransportnol lit-ry, 1955. 63 p.
(Bridges, Wooden) (MLRA 8:10)

K02I,M9 SsIat inzhenere
- -14~-
Wood treating plant. Avt.dor. 18 no.l124-25 Ja-F 155. WRA 8:4)
(Woocl--Preaervation) (Bridgeo, Wooden)

KOZWV, S.I., inzh.
Mobile wooden tower scaffolds to be used in repairing bridges.
Avt. dor. 21 no.5:18-19 My 158. (MIRA 11:6)
(Daghestan-Roads-Maintenance and repair)

KOZLOV, S.I., inzh.
Manufacture of reinforced concrete pileB during winter.
Avt. dor. 22 no.9:28 S '59. (MRA 12:12)
(Concrete piling)

ACC NRs AP6028337 SOURCE CODE: UR/0293/66/004/004/0574/0580
AUTHOR: Kozlov, S. I.; RaIK!j~Yu._P. ~133
ORG: none
TITLE: Evaluation of the coefficient of dissociative recombination in the lower
ionosphere
SOURCE: Kosmicheskiye iseledovaniya, v. 4, no. 4, 1966, 574-580
TOPIC TAGS: electron concentration, dissociative recombination, naftic:AM *11
chromospheric flare, x radiation
ABSTRACT: The coefficient of dissociative recombination at altitudes up to 1-100 kifi
is calculated using Western rheometer data on ionospheric absorption obtained during
the high-altitude nuclear explosion of 9 2yly 1962.\ythe calculations performed diffet
from Chose of iR. E. Le Levier (Journal of Geophysical Research, v. 69, no. 3, 1964,
p.481) in that the important process of ionization of the atmosphere by y-radiation
of fission products is taken into account. It is.shown that at altitudes up to
nu 100 km, the coefficients of dissociative recombination should be within the limits
of 1, 5.5-8 x 10-7 CM3/sec. Orig. art. has: 5 figures, 3 tables, and 4 formulas.
JEG]
SUB CODE: 04/ SUBM DATE: lODec65/ ORIG REF: 006/ OTH REF: 008/ ATD PRESS:*,

1.AICC NR ~X603516i, SOURCE 0DDETUKVO4l3[66_/GU07019XM
INVENTOR., ,Kozloi, S. I.; Oorbenko, 5. M.; Bakulina, R. I.; Kochetkov, Yu, V.
ORG: fione
'TITLE: transmitting and automatically registering information from
-in
equipmeni ope tion. Class 74, No. 1868 72
SOURCE: Izobreteniya, promyohlennyye obraztay, tovarnyye znaki, no. 19, 1966,
133-134
TOPIC TAGS: com ter, computer system, industrial automation, industrial instrumentl
ABSTRACT: An Aut or Certificate has been issued for a device for transmitting and
automatically re&~(Lstering information from equipment in operation. The device
consists of electiic-pulse summation counters, telephone numerical selectors, equip-
ment-condition triansducers, interval scanners, and an electrical-circuit commutator.
For the discrete automatic summation of.equipment downtime, the commutator, which
is in the form. of~ a relay scanner, is conne-ted through the normally closed contacts
of the time-lag *lay of the interval ocanni.-r's pulse pairs between the power supply
and the interv~l--~scanner~s brushes, the contact leads off of the identical sign
of which are connected to the electric-pulsesummation counters.
SUB CODE: 09/'SUBM, DAM 23Hay64/
UDC: 621.398:654.941

W-W
it~ 'N -1,- --A
-.-,.q~tx.-
g~,
RAI I
WM
w
.. M, N-G
X-9K
E'R
It0
w
pq-
r _: sm,
41
'14 s
"ejFR
M
RSTM AN C
.."0 D-th7o
kit
VI
ralf
f4
gmu zg~
..... tA

41) Z-
112-3-5748
Translation from: Referativnyy Zhurnal, Elektrotekhnika, 1957,
Nr 3, P. 100 (USSR)
AUTHOR: Kozlov, S.K.
TITLE: A-i~ree--6utier Holder (Proposed by Yu.A. Larionov)
(Trekhreztsovyy derzhatell)
PERIODICAL: Sb. rats. predlozheniy. M-vo elektrotekhn. prom-sti
SSSR, 1955, Nr 55s P-10
ABSTRACT: Three cutters are used simultaneously to machine
collector rings for 1'17' type stectric motors. Each
cutter machines one collector ring. The cutters are
held in a common holder, which is provided wlth screws
for adjusting the projection of the cutters. Machining
time is reduced by a factor of three. L.A.Yas
ASSOCIATION: Ministry of Electrical Industry of the USSR (M-vo
elektrotekhn. prom-sti SSSR)
Card 1/1

of
, ., v t
svar. 18 rin. 59- k'~l Pp tt',r
4
1. Inst3t,ut i-ttonli AR' 0'
yatsenko, 0 1 ci~ 0'!!l i kc-;tj. r
pu lte~rykh kon;!~~-iy n..-o.- T.' -~. -1 1,~, 'n -1 -1 -S.~ I e,~ nwi sk(~g-o
jnstitut.% V'Ln~r:ts!-f,v~

KOZLOV, S.M., ITIZ11.
j
Socialist competition in the enterprises of the oils, fat,s,
perfumes, and cosmetics industry of the Moscow City Economic
Council. Masl.-zhir. prom. 29 no.10;1-3 0 163. (MIRA 16:12)

~- KOZWT, S.M..,,inzh.; BELENIKIY, L.H.,inzh.
Use of collapsible pads in ship Imunching ijideways. Sudostroonie
26 tio.10:&~-67 0160. (MMA 13: 10)
(Ships--liaunching)

NFISVIZHSKIY, Oskar Abramovich, KOZLOY, Ser987 Nikhaylovich. , GIKPELISON,
A*Z.. reti.; GILINS011. P'.G.O t~*-~bd - - , ,
[Equipment of the ftment industrY in C"ahealoyakial Oborudovanie
teamentnoi ptomyehlannosti Chdthoolovskii. Moskva. Goa. izd-vo
lit-ry po stroit. materialam, 1957- 73 P. (MIRA 11-11)
(Czechoslovakia--Cement plante--Zquipment and supplies)

KOZLOV, S'll,
land profi.lograDh,, Trudy VITSKHOMa no,34:65-70 162.
(MIRA 16:11)

KOZLOV, SvyatoBlavNikolayevich; SNIRNOV, Mikhail Vasillyevich;
RAZI, Ivan Stepanovich; SIDOROV) Petr Aleksandrovich;
BEZDENEZFMKHP P.T.7 red.; SR1124IS, N.V., tekhn.red.
(Soviet military science] 0 sovetskoi voennoi nauke. 2.,
perer. i dop. izd. Moskva, Vaenizdat, 1964. 403 p.
(MIRA 17:3)

PASSEK, M.A., gornyy inzh.; PUGO, A.M.. gornyy inzh., DOKS. M.Ye.,
gornyy Inzh.; KOZLOV, B.H., goruvy inzh.
Underground iron quartzite mining In the Kursk Magnetic
Anomaly, Gor. zhur. no. 11:15-20 N 160. (MIRA 13:10)
1. Kombinat KMArudaO g. Gubk1n Belgorodskoy oblasti.
(Kursk Magnetic Anomaly--Iron mines and mining)

KOZLOV, S.S.
TDP 1 telemetering pressure gauge. Gaz, delo no.Irj.-4-,--47
163. (MJTIA 17:4)
1. Spotsiallnoye konstruktorskoye byuro

n n
U i ro i t v o ka b(, Ilnivkh iiIIII sviazi 11;l

Ilikolay Vasillye-vicli;
MA
KO-Z1,0V S . s. pred V?,,'-',Li ISK ITY
VC-1 red
[Colrmun~,aticns in PiTieline tran,-poj, tat Jon] Svla7l na ~-ru-
,riprovi3inum transporte. !.:(;~kva. lzl-v~, ~9c

KOZIDV, S.S., inzh.
,
WideniDg the control range of potentiometers. Avtom., telem. i
eviaz' 2 no.5:33 14y '58. (MIRA 11:5)
(Potentiometer)

28(l) r.
X-JOV/118-59-1-3/16
AUTHOR: Kozlov, Engineer
TITLE: Automation in Gas Extraction and Distribution (Avtomati-
zatsiya protsesov dobychi i transporta gaza)
0
PERIODICAL: Mlekhanizatsiya i 'I'vtomatizatsiya Froizvodstuva, 1959,
~ "Ll)
Nr 1, pp 12-18 (tfs~j I
ABSTRACT: The article stresses the importance of wider automa-
tion and remote control. of basic technological opera-
tions in the f-as industry. According to the Seven-
L C,
Year Plan, gas extraction and processing will reach
150 billion cubic meters by 1965. By that time about
26,000 km of new gas mains and side pipelines are to
be constructed. At present gas main supervisors are
only connected by telephone with the section inspec-
tors. All new gas mains to be put into service from
1960 onwards will generally have wider automated
technological processes and fully automatic dispatcher
Card 1/2

SOV/118-59-1-3/16
Automation in Gas Extraction and Distribution.
control. Gas mains are controlled predominantly by
the "TSDP" (Central Dispatcher Point) through the
"RDU"s (District Dispatcher Control), the "KP"s (Com-
pressor Stations). The automated "TsDP" is in charge
of up tol5"KP"s. The "RDU"s serve -as main section 90-
0
180 km long. For the first time, compressor stations
will be automated on the gas mains Stavropof-Moscow,
to be operated at the outset of 1959. All control
points will be connected with the "TsDP"s by communi-
cation lines. One two-wire line can carry up to 25
control point connections. The article describes in
general, the operationsof a gas extracting and distri-
buting unit provided with automation and remote control.
There are 2 photos and 4 diagrams.
2/2

- KOZLOV, S.S.,. iTah.
Remote control and nechnnization of natural ~-,,--s 1,roftctl-on 1r,
France. Mekh.1 avton.prolz7. 14 no.2:55-56 F '60.
(1417U
(Franc a.-Natural gas)

KOZLOV) S.S.
Hydrogeology of the Karamazar Hmmtains (Northern Tajikistan). Vest@
LGU 16 no. 6:139-143 161. 0AIRA IL4:4)
(Karamazar Mountains-Water, Underground)

KOZLOVP SZ.S2,~ [KOZIOVI S.S.] okl. villamormernok
Telemechanic s- .0
,7stem of gas and oil pipes in the Soviet Union. M ros
autorat 10 no.2:-'3-40 162.

*A, KOZLOV, S.S.
Some features of the changes of underground waters in the upper
hydrodynamic zone of the Kara-Mazar Mountsins and Mo ol Tau. Veste
IGU 17 no,18:18-24 162. Va-RA 15:10)
(Illurama RanEe-Waters Underground-Composition)
(Mongol-Tau-44ater., Underground-Composition)
~ .4~

RYABTSEV, N.I., red.; B4HIN, V-ye-, red.; VIGDORCHIK, D.Ya., red.;
IVANOV, N.P., red.; KNAPP, K.K., red.;-KQZLQVjj re .;
PROFERANSOV, V.P., red.; SLOBODKIN, M.S., red.; SHARDVATOV,
L.P., red.; BYKOVA, L.B., ved. red.; KORSUN, Ye.P., red.;
USHAKOVA, A.F., ved. red.; POLOSINA, A.S., tekhn. red.
[Gas equipment, apparatus, and fittings; reference book]Ga-
zovoe oborudovanie, pribory i armatura; spravochnoe rukovod-
stvo. Moskva, Gostoptekhizdat 1963. 469 P. (MIRA 16:4)
(Gas, Natural-Pipelines~ (Gas appliances)

~y S rgey Sargeyevich; SIDGROV, V.N., ved. red.; STAROSTINA,
IOK~~
U., tekhn. red.
(Remoto control in main pipelinos] Tolemokhanizatsiia
magistraltrWkh truboprovodov. Moukva, Gootoptekhizdat,
1963. '19 P. (MIfU 17:1)

ZHE14ARIN, V.A.; KOZLOV, S.S.
Present and future developments in the oil container industry.
Transp. i khran. nefti no.8:24~27 163. (MIRA 17:3)
1. Gosudarstvennyy komitet khimicheskoy i neftyanoy promyshlennosti
pri Gosplane SSSR i Glavnoye upravleniye po transportu i snabzheniyu
neftlyu i nefteproduktami RSFSR.

KOZLOV, Sz.Bz. (Kozlov,. S.S.1, okleveles villcunosmernok
Telemechanical system of gas and oil pipelines in the Soviet Uzdon.
Pt. 2. Meres autanat 11 no.2:51-57 163.

KOZLOV.,S.S.,; KOZLOVA, E.V.-, 11ARTIYA.11011A., G.I.
Gan cm-lent of tho underground vat~7~o in northern Tajikiotan.
Vest. Ik.,U 19 no.1.2,.~-'.'-8
.- 0 164 (14IRA 17 t8)

KOZLOV, n.T.; Ti-,WSYREV, G.D.; TALIROZE, V.L.
CuL-alytic, disintegration of certain oxygen-containing organic com-
pounds on stainless--steel. Zav. lab. 31 no.9:1113-1114 165.
(MIRA 18:10)
1. Inatitut khimichookoy fiziki AN SSSR.

KOZLOV S T.- KARPUKHIN, O.N.~ KARASEVA, Ye.A.
Pavill(jn "Sciencf)l of t1la Soviet jiFnt,lon z:f the. Ant.,5mAUona.1
exhibItLon nChemiGU7 in Industryg C(dnstruc~ticn and Agriculture.n
Prircda 54 no.12:3-5 D 165a 'M:Ri.. 18:12)
1. .7natiltut kidmicheskuy fizikl'. JN SEW, Movkwi (fcr Kczlov,
Karpukhla). 2. VseHoy-uzncy-e ,!ss'Y-.va
(i-c-r Karaseva).

KAZAPJIGVSKIY,, I.A.; LIPIKHIN, N.P.; KOZLOV,,,.S.V.--
Reaction of free hydroxyl radicals and oxygen with acetic acid
vapors. Izv.AN SSSR Otd.khim.nauk no.5:956 My 163. (MIRA 16:8)
1. Fiziko-khimicheakiy institut im. L.Ya.Karpova.
(No subject headings)

HEIM, S" . V.
Application of the Folcker-Planck equation to ci.em.J.cal
3') i le"
!7 : 1.
(", .- , I.,
1. li~itichrio-i-,!,~iledovatelfr,",iy in-.,-,itut
Ininni L.Ya.Mirpova.

1. B,""IYENK-0, 3.YA., KOMOV, S.YA., CHERNYAF~, N.
2. U,-,SR (600)
4. Hollow 3rick' Tile, Etc.
'I. Follow ceramic blocks mde from clays of the Voscow ra---Jon, 3.Yll. F~atliveako, 3.YA..
Foziov, YA. .11% Chernyak, Elul.stroi.tckh. 10 no. ~-, 19,1".
- ,"'p lin 1953, Uncl.
9. Monthly List of Russian Accessions, Library of Congress,

BATITMO, S.Ta., insheneri KOZWT. S.Ta., inshener; CHFJWAKe Ya*N,,
kandidat
Decorative ceramic brick for wall construction. Gor.kh02.Kook. 27
no.12:29-30 D 153. MU 6:12 )
(Bricks) (Walls)

Curtainlike tunnel kiln gates. Rats. i izobr. predl. v stroi.
no.7:74-76 '58. (MIRA 11:12)
(Kilns)

KOZWV, inzh.; SWIRO, A.M., inzh.
Automation and mechanization of technological processes at
the onter-riaos of tho buildb~r, materials industry In Moscow.
Stroi.mat. 6 n'o-1:10-13 Ja 160. 64IRA 13:5)
(Moscow--Building materials industry,Uquipment and supplies)
(Automation)
Ir4

ONATSKIY, S.P., kand. tekhn. nauk; IVAVO~I-DYATLOV, I.G., doktor tekhn.
nauk2 prof., retsenzent; GERVIDS, I.A., kand. tekhn.nauk, re-
tsenzent; KOZL-O-V-,J-IA--,-inzh., retsenzent; ROGCYVCIY, M.I.,
laureat Go-s-u-d-arstvennoy premii, nauchnyy red.; KOSYAKINA, Z.K.,
red. izd-va; TEMKI14A, Ye.L., tekhn. red.
[Manufacture of keramzit] Proizvodstvo keramzita. I-loskva,
Gosstroi-'Lzdat, 1962. 242 P* (MIRA 15:7)
(Keramzit)

KOZLOV, S.Ye.
Development and distribution of viticulture In the Crimea. Izv.
Krym. otd. Geog. ob-va no.5:225-231 '58. (MIfL4 14: 9)
(Crimea--Viticulture)

-7-
2 Z_
AUTHOR: Kaminskiy, L., Novozhilov, V., Novosellskiy, N. 2-1-7/9
TITLE: A Manual on the General Theory of Statistics (Xurs obshchey
teorii statistiki) by Kozlov, T.I., Ovsiyenko, V.Ye., Savin-
skiy, D.V.., and Smlrns~jy, 7-T-
PERIODICAL: Vestnik Statistiki, 1958, # 1, p 68-76 (ussR)
ABSTRACT: A team is reviewing a text-book on the theory of statistics
published in 1956 by the Moscow University and approved by the
Main Administration of Universities and Economical and Juri-
dical Vuzes of the USSR Ministry of Higher Education (Glav-
noye upravleniye universitetov, ekonomicheskikh i yuridiche8kikh
vuzov Ministerstva vysshego obrazovaniya SSSR) as a valid
text-book for use in economical institutes and faculties.
Nevertheless the text-book is criticized negatively. Only
a few subjeoteare dealt with in a satisfactory way, but on the
whole the work does not meet the standsrd of a good text-book.
Many essential statistical questions are not mentioned at all,
nothing was said about the organization of statistics in
people's democracies, in capitalistic countries and about in-
ternational statistical organizations. Other statistical pro-
blems are treated eithor too short or superficially. The im-
Card 112 portant role of the Russian statisticians in the history of

2-1-7/9
A Manual on the General Theory of Statistics by Kozlov, T.I., Ovsiyenko,
V.)6, Savinskiy, D.V. )and Smirnskly, V.I.
statistics is not pointed out sufficiently. The authors did
not comply with the general directions ~Fiven by the Statistical
Conference in 1954.
The task of the publishers is to eliminate all these de-
ficiencies in the second edition of the text-book.
AVAILABLE: Library of Congress
Card 2/2

AUTHOR: Kozlov, T. SOV/2-58-10-2/15
TITLEi out V 1. Lenin's '"ork 11~he Problem of Our Factory-Plant
il A.
Statistics" (0 rabote V.I. Lenina"Kyoproau o nashey
fabrichno-zavodskoy statistike")
PERIODICAL: Vestnik statiEtiki, 1958, Nr 10, pp 8 - 12 (USSR)
ABSTRACTs The article deals with the work of Lenin on industrial
statistics, which was published in 1898. In this work
Lenin criticized the statistical methods of the Czarist
regime and advocated centralization of statistigal work.
There are 2 Soviet references.
Card 1/1

KOZLOV,_T,4., prof.# doktor ekon.nauk, otv.red.; BREGELI, X.Te., prof.,
doktor ekon.nauk, red.; BUKH, Te.M., dotsent, kand.ekon.nank, red.;
ZHEBRAK, M.Kh., prof., doktor ekon.nauk, red.; ISAKOV, V.I.,
dotsent, kand.okon.nauk, red.; FRETMUND, Te.N.. dotsent, kand.
ekon.nauk, red.; SHEVCHUK. A.V., kand.ekon.nauk, red.; SHUMAN,
I.G., dotsent, kand.ekon.nauk, red.; SHCHAPINA, T.A., dotsent,
kand.ekon.nauk, red.; USTIYANTS, V.A., red.; HELENTIYEV, A.M.,
tekhn.red.
[Problems in statistics and accounting; a collection of articles
on machine accounting] Voprosy statiatiki i ucheta; sbornik
statei po mekhanizataii ucheta. Hook-va. Goa.stat.izd-voo Nc.2.
1959. 350 P. (MIRA 13:6)
1. Moscow. Aconomiko-statisticheakiy institut.
(Machine accounting)

KOZLOV, T.I.., prof., otv. red.j BREGELI, E.Ya., prof., red.; BUKH, Ye.M.9
red.; ZBEBRAKj M.Kh.9 prof*, redo; ISAKOVt V*I,p dots.9 red.;
FREYMUNDTv Ye,N,p dots., rod.1 SHUMAN, A.G.9 dots., red.; SHCHA-
PINA, T.A.v dots.9 red.1 SHEVCHUKq A.V., kand. ekonom. im*v red.;
SHENTSIS, Ye.M., red.; PYATAKOVAg N.D., tekhn. red.
[Problems in statistics and accountir4l Voprosy statiatiki i ucheta.
Moskva, Gosstatizdat, TdSU SSR. No.3-LCollection of articles on
labor productivity statistics in industry~] Sbornik statei po a*-.
tistike 1?roizvoditellnosti truda v proqrshlennosti. 1961. 145
(MIRA 14:4
la Moscow. Ekonomiko-atatistichealdy institut.
(Productivity-Accounting)

1)"OZLOV, T.I.,, prepod.; KULDIEINKOVA, Ye.Ya., prepod.; HACCI-FlINA
preFod.; LEPILIII:, V.N.; MELVEDEV, A.A.; A.A.
OVECall-1, 1.Ye.; FAVIT r)jQjF S. A.
,ti .0, I.S.; FI.YUMKII;, -
RASHKOVSKAYA, N.B.; RQ.:PMOV, F.G.; FROLOV) V.P, .,- YABLONTSK IY,
P. A. -
P.:Unual oil Leal Work til the la"Lloralory Oil thc) procez;---s
and apparatus of chemical !.echnologyj Rukovodstvo k p-ak-,i-
cheskim zardatiiarr. v laborntorli pa prot:,essam, J- apparatwn
kidmicheskoi takhrlologii. Izd.2., i dop. 1.'o-,I:va,
Khimiia, 19,4. 243 p. (mi.-~A 18-2)

KOZLOVI T.S.; SOKOLOVAI A.K., red. izd-va; FOSS, Yu.A., tekhno redo
(Society and geographical environment] Obshchestvo i geografi-
cheskaia areda; v pomoshch' uchiteliu geografii. Voronezh~ Izd-
vo Voronezhskogo univ., 1960. 83 p. (MIRA 14:12)
(Anthropogeograp1q) (Geography, Economic)

TARASOVA., Z. N.; KAFLUNOV., M. Ia.; I '-ADKT , B,A,
-~OZLOV, T. V.; NUUZEN N. A.; DOC
Interaction of sulphur and natural rubber under ionizing radiation.
Chem prum ll,no.1-1:601-604 N 161.
1. Vy-,,kwmy ustav prunVslu pneumatik, Moskva.

ACC NR, AP6033642 SOURCE CODE: UR/0018/66/000/010/0080/0082
AUTHORt Kozlov, Ve (Lieutenant colonel)
ORG: none
TITLE: Scanning for low-flying targets
SOURCE: Voyennyy vestnik, no. 10, 1966, 80-B2
TOPIC TAGS: aerial target, target tracking, radar target, optic scan-
niug, radar scanning,,,1=321~K
ABSTRACT: This article states that for*reliable scanning of airspace
at low altitudes target acquisition and identification stations are best
located on a natural or artificial elevation, away from wooded areas,
and should use an extra section to increase the height of the antenna.
Gun-laying radar is employed to increase the reliability of target ac-
quisition at low altitudes.
SUB CODEI 15/ SUBM DATEt none
1/1

KOZIDV, V. (Moskva)
Transistor radio using n-p-n and p-n-p t7pe transistors. Radio no-5:
45-46 My 160. MiA 13:12)
(Transistor radios)

ACC NRi AP6033642 SOURCE CODE: UR/0018/66/000/010/0080/0062-'
AUTHORt Kozlov, Ve (Lieutenant colonel)
ORGi none
TITLEt Scanning for low-flying targets
SOURCE: Voyennyy vestnik, no. 10, 1966, 80-82
TOPIC TAGSt aerial target, target tracking, radar target, optic scan-
ning, radar scanning JaM34aw
ABSTRACT: This article states that for reliable scanning of airspace
at low altitudes target acquisition and identification stations are best
located on a natural or artificial elevation, away from wooded areas,
and should use an extra section to increase the height of the antenna.
Gun-laying radar Is employed to increase the reliability of target ac-
quisition at low altitudes*
SUB CODEe .15/ SUBH DATER none
1