SCIENTIFIC ABSTRACT LEVIN, A.I. - LEVIN, A.M.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R000929520001-3
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
August 23, 2000
Sequence Number:
1
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
![]() | 3.3 MB |
Body:
-Ucviw, Lid KWIYffj N.A.
Zleatrochemical oxidation of trivalent chromium in industrial
dichromate liquor@. Xhim.prom. no.9t642-644 S 162. (KMA 15:11)
. (Diobromates) (Oxidation, gleatrolytic)
POMOSOVP A.V.; IEVIN A.I.
Present state and prospects for expanding the production of
electrolytic copper powder. Porosh,met. 2 no.1:18-20 JTa-F
162. OURA 15:8)
1, Ural'skiy politekhnicheskly institut imeni S.M.Kirova.
(~btal powders) (Coppi-Electrometallurgy)
KARKAYFV, W.A.; LEVIN, A.I.; KOTOVSKAYA, N.L.
Pbotoolectrocolarimtric determination of trivalent chromiam
in industrial solutions. Zav.lab. 28 no.5s547-548 162.
(MRA l5s6)
1. Urallskiy politakhnichemkiy inatitut imeni S.M.Kirova.
(Chromium--Analysis) (Colorimetry)
LIVIXp AsIej IAZARKV, V.F.
CbM foamb-producing agent and ite effect on the formation of lead
?,uteo of a storage battery. Zhur.prikl.khim. 35 no.,ltl23-127 A
0 (MMA 15 31)
le UrallekLy politekhaichookiy institut imeni S.M.Kirova.
(surface-aetive agents) (Zlectrochemistry)
(Storage batteries)
IZVINI A.I.1 LICTSKIKHt Te.S.1 MMINj V.A.1 NOKMGp M.I.
Balance of bath voltage and vays to improve the operation of
electrolytic cells in copper electrolysis plants. TS"t, meto
33 no,lls52-57 N 062, (MIRA 15M)
(Copper-Riectrometallurgy)
LAZAREV, V.P., LFVIN, A.I.
Nature of the polaritaticn in the formation of 16ai frna le&d
sulfate. Zhur. fix. khIm. 36 no.k1318-13Z) JaI62
(MIKk 1,737)
1. Urallakly pal Itekbon A. cheek 1y InntItut imeni Kirova.
LEVIN A.L. insh,
4==I_ft~~
Preamplifier of a closed-circuit television aMmel, Vest. sviazi 23
no.W6-18 F 163. - (MIRA 16:2)
1. ~wlkovskiy televizionnyy ts4ntr
-(Television) jAmplififtV, Electron-tube)
IFINg A.l.j LRTSXlng U.S.; WIHIN# V.A.; NOHWWI M.I.
W~
Balm a of cell iroltMe and ways to sconomise electrIc power in the
electrorefining of copper, lzv&Vys* ucbob* sav.; Uvet, mato 5 120011
62-71 162. (MM 15:10)
1. Urallskiy pol-itakhnichookiy institut, kafedra telfhnologii elsixktro-
lrhi-49hookikh proizvodstv*
(Copper-Elogtrometallurgy)
MIN A I ,
Ways of accelerating the process of electrolytic copper refining.
TSvet, not, 36' no.ls22-28 JaL 062. (KIRA 160)
(Copper-glactrometallurgy)
IEVIN, A.I.;.NCKMG, M-L
Optimm awrent density in the electrorefining of"copper.
TSvet, note 35 no.9o29-37 8 162. (MIRA 16%1)
(Capper-nostrometaUurgy)
LEVIN, Aron losifovich; N%!WG, Mayor lzrallovichl U)TSKAYAt
., red.izd-Va; ISUNTITEVAt P.G.0 tokbn. red.
(Electrolytic refining of copper] Elektrolitichaskoe ra-
finirovanis medi; spravochnoe posobis elektroliznUao MO-
skyap Metallurgizdatv 1963o 216 p. (MIRA 17:1)
WIN, Aron-lonifovicb; LIARTSEV, P.D., red.; ARKHANGELISWA,
M.S.9 red.izd-va; YIXWLOVA, Y.V.2 tekbn. red.
[Tboorctical principles of electrochemistry] Teoreticheakie
oanorvy elektrokhimii. Mo--kvaj, Metallurgizdet 1963. 430 P.
Wu 16:12)
(Electrochemistry)
LEVIN, A.1.0 doktor tokhm. nauk; FROSTAKOV, M.Ys.t kand. tokba. nauk
Passive film on nonferrous and fezTouo metals, Zb=,
VKHO 8 no.5:524-529 163. (MM 1711)
LETSKIKH) Ye,S.; LEVIN, A.I.
Anodic processes in the electrolytic refining of copper. Met.
met. 36 no,7t29-35 n 163. (MERA 16:8)
(Copper-Blectrometallurgy) (Passivation)
~ ;I LEVIN., A.I.;,-,LZMKIXH, - Ye.S.
I'1 I
Intarunivqklly conference on the electrodeposition of nonferrous
Metals * I * Mt. 36no.lOs82-U 0 163. (XMA 16 112)
tv
tzvIN' A. I.
Devolopmen1lin the electrochemical scienco and technology in the field
of the electropreelpitation of metals, Mot, mt. 36 no.12YI9-24 D 063.
(MIFA 1712)
..t%
LEM,. A. 1. (Ural Polytechnical 1nstitA-e!riq-__S_-__9-
"Development of electrochemical science and technology in fields of electro
deposition of metals and technical. progress." Electrolytic means are used at
present to obtain compact metallic deposits, refined metals, metallic powders and
alloys and protective and decorative coverings. Development of electrochemical
technology proceeds in the direction of further increase of current densities through
application of newp Improved types of electralyzers and electrodes, use of more
effective additional agents, methods of feed and circulation of electrolyte, appli-
cation reversing, pulsating and alternating current, as well as new e2ectrolytes, new
conditions of electrolysis and new electrochemical processes.
Report presented at the Intervuz Conference on Electrodeposition of Nonferrous
W-taln, Ural Polytecbnlcal Institute Im S. M, Kirov, Sverdlovsk, held from
27-30 May 1963-
(Reported in Tsvetsyye Metally, No. 10, 1963, pp 82-84)
JPRS 24,651 19 May 64
LEVMj A. I.
"Means of Intensification of electrolytic refining of copper" - indicates it is
possible to outline the following main directions of works In this field: increase
of temperat*re of electrolyte to 60-650C with simultaneous closing of the mirror electro-
lyte; suppo4ng of concentration H2SO on a level of 200 9/1, and CuSO4 5420 to 140 G/1;
owing to increase of quality of servicing of baths a decrease in interelectrode distance;
during abundant slime formation chang! of direction of the circulation of electrolyte
in baths downward; introduction of sediment and filtration of -electrolyte; improvement
of quality of matrix sheets and anodes; use of anodes with lowest possible quantity of
lead and nickel# facilitating passivation of anodes; introduction of continuous dosage
of additional agents in optimum concentrations; lowering of concentration of nickel
in solution.
Report presented at the Intervuz Conference on Electrodeposition of Nonferrous
Metals, Ural Polytechnical Institute im S. M. Kirov, Sverdlovskp held from
27-30 May 1963.
(Reported in Tovetnyye Metally, No. 10, 1963, pp. 82-84)
im 24j651 19 May 1964
LZMj, A. 1. (Prof.-Doctor)
"The influence of superficially active materials on the process of passivation
of a lead electrode"
Report presented at Oic Intervuz Conference on Electrodeposition of Nonferrous
Metals, Ural Polytechnical Institute Im 11. M. Kirov, Overdlovnk~ hold frcm 27-30
May 19b3.
(Reported in T~vetnM Metally, No. lo, 1963, pp. 82-84)
JPRS 24,,651 19 may 64
chi NOMBMGP moyer lzrailevieb
IZVDI, Aron 106ifov' r t tarAbOok for an
,,Iticheakoe ra-ft-
jr,jectrolytic I't'r"ng Of coppe
gleotrolytic c9ll operatorl gleictri e elektroll=ikse
nirovanie medl; spravochnos posobi (KRA 17 t 12)
Moskval metailurgizdato 1963. 216 p,
U,VlNv Aele
Ej~j-trojhydrauj.Ac
spend regolatiOno
dc --InR6 Or cteP'ezp
fend dr,Vs vIth a '44'l 113-.2-1 C' '&~-
i instr. 35 niolfi. I
'"'* A flGT.-
St k. - I
GURYLKV, V.V.1 LEVIN, A.1 0.; NASAKINA, M.B.
Use of ultrasonic waves and reversing current in the
electrodeposition of copper from a pyrophosphate electrolyte.
Zhur.prikl.khim. 37 no. 5tlO53-1057 Pq 164. (MIRA 170)
1. Urallskiy politekhnichaskiy Institut imeni S.M.Kirova.
ITNI,-, A.I.; 'I*,K,',:I!,
N, V.A.
I
TISIng CI'L-IrMp-1-tYFe eleCtV-')l-!t'C CellS for t~~a
refining of colper. TS-iet. mot. 37 no.6ilP,.-22 Je 164.
("liv, 1,7:9)
KOCHEROV, V.I.; LMKIKH, Ye,S.; KUKHRI, V.A.; 1XVR1, A.I.
Bath voltage balance and waya of perfecting copper foil pro-
duotione Izv, vyse ucheb# zav tovet, mot. 7 n0-5139-44
164 (MIRA 18sl)
1. Kafedra takhnologii elektrokhimichosklkh proizvodstv Urall-
skogo politekhnicheskogo institute.
MUKHIN# V.A.1 t~.V~I,.A.I.
Studying the effect of chlorine ions on the quality of
cathodic copper in the intensification of electrolysis,
TSvet. met. 37 no.1106-37 N 164. (KMA 18z4)
LEV-,tj A.I.; WFINIAT, V.F.
Ef fect of fatty &,Juo rjn t.~e I fJon rX rrba it fr~,r
chloride elactrolyt"no Zhur.j,-rjkI.kMm. 37 -;,i,
164,, (m 1 ~ ~'), )
1. Ural I ski. v pnlli t,ikImI'-I.P4,j,,f VW, Imf ri,
LF.vIN, A.I.,- V.F.; KUHIN, V-A-
aux,li#,-y pa-,t.3 ,3P a stcragj battery uging
Electrolytic lead '~:;atlng Of
S.,ilramine electrolytes. Zhar, pr1kl. kh'J6m. '18 no.7il%9-2.5774 Jl 165.
(MIRA 18:7)
1. Urallskiy politekhnichesk-L-Y ins".1tut.
10 ARKHIPOV, A.Ya.; ALTAYFVA, N.V.; BAYBULATOVAI Z-K-; VISXOVSXIY, Yu.A.;
GOLENKOVA, N.P.; KRAVCHENW, M.F.; KUPRIN, P.N.; 110&_A.I.;
POL1379R, L,A,; SEWVt V.N.; SIRKEV, I.P.; USHKOp K.A.;
SHOWBOV, V.V.; PrWmali uchastiyes RODIONOVA, M.K.; CHELITSOV,
Yu.G.; KUZNETSOV, Yu.Ya., kand. geograf. nauk, nauchnyy red.
[Geology and oil and gas potentials of the south of the U.S.S.R.;
Kara-Bogaz-Gol (Gulf) r gion (eastern part of the Middle Caspian
oil- and gasAsaring ba:ln).) Geologila I neftegaxonoanost' luga
SSSR; Prikarabosaste (yostochnaia chast' Srednekaspilskogo nefte-
gasonomnogo basseIna). Leningrad, Nedra, 1964. 300 p. (Trudy
Nauchno-isaledovatellskoy laboratorit geologicheskikh kriteriyev
otsenkI perspektIv neftegazonoanosti no.12).
LEVI III_ A. L.
Some diagnosticany important nymptoms of vasomotor rhinitla. Zhur.
Uah., nos. i gorl. bol. 24 no.5:48-53 S-0 164.
(MIRA 18:3)
1. Iz kafedry bolezney ukha,, gorla i nosa imeni zasluzhennogo
deyatelya nauki prof. L.T.Levina (zav. - prof. V.G.Yermolayev)
Leningradakogo Ordena Lenina instituta usovershenstvavaniya
vraoheye
3/103/61/022/009/013/014
D206/11304
AUTHORSt Korobochkino B.L., and Levin,A.L. (Moscow)
TITLEs The influence of dry fr%ttion in guiding rails on the
stability of the hydraulic follow-up systems in auto-
matio cutting machines
PERIODICALs Avtomatika I telemekhanika. v. 22, no. 9, 1961,
1253 - 1256
TEXTt In the present article the authors analyze the problem of sta-
bility and of dry friction In %he follow up systems in these instal-
lations on a krictly theoretical basis. For increased accuracy in
determining the behavior of the system in an oscillatory state, the
saturation characteristics of the piping is introduced.,.aa condi-
tioned by the finite pump output. In solving the problem, use was
made of the electronic analogue (MY-M). To evaluate the accuracy of
the results obtained the same analognalk. was used to obtain the so-
lution of the Vyshnegradskiy problem which was in complete agree-
Card 1/5
8/103/61/022/009/013/014
The Influence of dry friction D20*/D304
ment with the solution of this problem given by A*A. Andronov and
A.G. Mayer. The present article is restricted to analyzing the in-
fluence of dry friction and that of saturation resulting from the
finite output of the pump. The linearized equation of the system
with linear Input function, i.e. with constani velocity of the
pro" without friction, has the form of
d3 d2 dl + d
L + M L.-4+ D irt D ff + R (1)
dt dt
In it L - a factor characterizing the influence of compressibility
of the fluid and elasticity of piping; N - the mass of the working
part of the machine; D - the coefficient of intepal dampingj 2 -
stiffness coefficientj R - the constant component of cutting speed;
6 - copying errorl y - coordinate of the probe tipj 6 = y - x,
where x - coordinate of the moving part of the machine. The analy-
sis of stability of such a system reduces to the Vyshnegradskiy
problem in the theory of servos without power amplification. The
Card 2/5
S/103/61/022/009/013/014
The influence.of dry friction ... D206/D304
authors -reduce the system to a dimensionless form of
P - (At P, - -rAl.?/ (5)
L; V _17 H
'where 5 and 'IP are dimensionless coordinates of the system and v a
dimensionless time. Since the pump output is finite, the velocity..
of moving arm cannot exceed
Q
w:k (6)
Xmax: - F
where QP is the pump output and P - the area of the piston. Eq.
(6) in dimensionless form can be written as
oQ
(Ad IT) Imax: - _PF_j R, (7)
MaX
The values of parameters ultimately obtained are shown as a fami~yl
Card'3/5
S/103/61/022/009/013/014
The influence of,ary friction DZo6/1)304
of curves in Fig. 2b with the limits of stability shown in Pig. 2a
for various initial displacements of cutting head from neutral. Th4~'.
same Fig. 2 shows the hyperbola of Vyshnegradskiy (Curve Ap Pig.
2b) and tke limits of stability region as obtained by A.A. Andro-
nov and A.G. Mayer (Fig. 2a). It is dtated in boncluaion that the
results by Andronoy and Mayer (Ref - 2 1 Zadacha Vyshnegradekogo, v
teorii pryamoregulirovaniya (The Vyehnegradakly 11'roblum in the
'Theory of the Control without Power Amplification) Avtomatika i
telemekhanika, v. VIII, no. 5# 1947) cannot,be applied directly to
the problem of stability of a hydraulic follow-up system of an au-
tomatio cutting machine# if the dry friction has to be taken int6
accountp and that the analysis of ouc)i a system witli the limitation
introduced by the finite output capability of the pump, has produ-
ced conditions for absolute stability as a function of its parame-
ters and of the pump output. There are 2 figures and 4 Soviet-bloc
references.
SUBMITTEDt August 159 1960
Card 4/5
LEVIN A. L . ordinator
Surface intranasal novocalne block in the treatment of vanomotor
rhinitis. Vast, otorin. no.5-134-37 061. (MIR-k 14:12)
1. Is kliniki bolezney ukha,, nosa i gorla imeni zaaluzhennogo dayatelya
nauki Prof. L. T. Levina (sav. - Prof. V. G.7emolayev) Instituta
usovershonstvovaniya vracbey i Ob"yedinennoy bollnitsy imeni V. I.
Leninal Leningrad.
(NOSE-DISEASES) (NOVOCAINE)
13VIN, A.Le; 7ROITSKAYA-TREGUI30VA, T.P., kand. mod. nauk
Roentgenological study in the diagnosis of vasomotor
rhinitis, Vast. oto-rins 25 no.4:39-42 Jl- 163.
VA 17:1)
1. Is kliniki bolezney ukha, nosa i gorla (zav, - prof,
V.0. Yarmolayev) i kafedry rentgenologii (zav. - prof.
Sh.I. Abramov) TAningradskogo ordena Ionina inBtituta
uoovershonstvovaniya vraohey imeni S.M. Kirova.
rin r,
c; Ul t 0 Zd'
70MIN, N.D.. otvatstvonVy rodaktor; LIVIN, A.M., rodaktor; IGNkTOVICH,
VW;.--PkVLOT. N.P., takhni-
T.M., roaaktor; SKOTRONOKs A.L. r=4--
chookly reaAktor.
Cftltsale price list no6l for prodttotion work in printing plants]
Prolskurant no.l. optoyrth toon na produktollu poligraflohookM
r dpritatil. Moskva, Goo. Isd-vo Olskusotvo.* 1932. 231 p.
XIC"roflim] (MM 8:2)
r
1. Basals, (1923- U-3-3-R.) OlAvuoye upmlonlys po Was poliva-
flatmakoy prox7shlennosti, UdAtel'sty I knlxhnoy torgovIl.
(Printing industry-fahl*m and roady rockonerm)
SIMANOVSKAU, R.I.; 1jvjNj-",.4-~STPIKA, X.I.
Technical and economic Indices of the production of sulfur dioxide
and portland cement from phosphogypona. LTrudyJ Niuiy no.16o:181-206
058. (MIRA 12:8)
tKazakhatan-Orpsum) (Sulfur dioxide) (Portland cement)
LEVINO A.M., inzh.
Slantle coupLinji for th,,j diract drive of mfrlpv~tor cunixeB.-ors.
Kholatokh-,40 no-3:1,5-47 114Y~-Jo '63- (14IRA 16:9)
(Youcov--Compressors-',i~ranamission devices)
f ~- 1 14 fl-i
,~i
.-
I I-I Ui
- - A
'ill
.. P
SOV/1 37-58-9-18441
Translation f rom: Referativnyy zhurnal, Metallurgiya, 1958, Nr 9, p 37 (USSR)
AUTHOR: Levin, A. M.
TITLE: On the Mechanism of Effervescence of Steel (0 mekhanizme
kipeniya stali)
PERIODICAL: Tr. Sibirsk. metallurg. in-ta. 1957, Nr 4, pp 119-141
ABSTRACT: To solve the question of the location of the development of
the oxidizing reaction of C, the critical sizes of the bubbles of
CO corresponding to the equal probability of their formation
In the bulk of liquid steel (BLS), on the interface between the
metal and the slag (IMS), and on the solid surface (SS) are
compared. At the IMS, under the most favorable conditions
(size of the angle formed between the convex slag layer and
the horizontal surface being 1200, and the surface tension of
the slag being one-fourth that of the metal) the critical size
of the nucleus Increases 20-fold as compared to its size in
BLS; on a smooth SS it is still lower (at a contact angle of
1400 it is only one-fifth). The nuclei formin on these inter-
faces as well as in BLS are very small (1* ICr - ZO* I cm
Card 1/Z and cannot grow spontaneously because this requires
z _;M
SOV/1 37-58-9-18443
On the Mechanism of Effervescence of Steel
super saturations thousands of times greater than the existing ones. Only on
a rough surface with pares of > I ~L is the appearance of nuclei capable of
growth possible. The surface oxidation of C is dependent on the presence of
porous particles on IMS. To verify these conclusions the composition of the
metal was determined at different depths in the batht of an electric arc
furnace of ZO-ton capacity. The variations of the concentration of C, Mn. P.
and S in the oxidizing period rarely exceed the analytical errors. The non--
uniformity in 0 content (( 101 top - 101 bottom)' L 01 mead. 100 attains
501,70 and decreases witn an increase in the intensity of effervescence. In
the upper levels of the bath , the excess [ 01 (above the equilibrium with
C) is approximately constant independently of the time of the addition of
the ore, which testifies to the predominance of the development of the
reaction on the floor of the furnace.
1. Steel--Carbonization 2. Slags--Surface tension 3. Furnaces S~ P.
--Performnce
Card Z/Z
SOV/ 137-58-8-16527
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 8, p 42(USSRI
AUTHORS: Levin, A.M., Kramarov, A.D.
T ITL E! Smelting of Electrical Steel From Blooms Containing Ni (Opyt
vyplavki elektrostali iz nikel'soder zhashc hey kritsy)
PERIODICAL: Tr. Sibirsk. metallurg. in-ta, 1957, Nr 4, pp 142-157
ABSTRACT: A 10-ton basic arc furnace was employed for smelting four
batches of Cr-Ni-Mo steel. Two batches were smelted in ac-
cordance with standard procedures, whereas the smelting of
the other two batches was carried out with a charge containiny
60 and 6416 of blooms with the following composition: 82.5-86.876
Fetotal, 0.99-1.061,16 Ni, 0.19-0.3876 Cr. 1.65-1.86176 C. 0.09-
0.1ZO/o S, and 0.17-O.ZZ% P. The nonmetallic components of the
blooms amounted to approximately 20% and contained up to 45%
SiO?. The technology of experimental smelt,ngs differed from
the standard procedures in the following respects a)introduc-
tion of 200-400 kg of lime and 100 kg of Fe ore into the charge,
b) addition of 500 kg of lime and 150-200 kg of ore during the
melting stage; c) discharging the slag twice during the melting
Card I/Z stage-, d) a P content of 0.067 and 0. 1 161o after fusion.
SOV/137-58-8-16527
Smelting of Electrical Steel From Blooms Containing Ni
e) introduction of an oxidizing stag in amounts equivalent to 41.7 and 36.97o;
f) a reduction in Mn content to O.OZTo at the end of the boil stage; g) a reduc-
tion in S content to values of 0.064 and 0.0731o after fusion. and 0.031 and
0.02976 prior to the beginning of the finishing stage; h) reduction in Ni con-
sumption by 5 kg/t of steel and an increase in the consumption of Fe-Mn by
8 kg/t of steel; i) increase in the time required for smelting of I ton of
metal, under current from 37 to 46 minutes; j) a 30-3519 increase in con-
sumption of electrical energy coupled with a reduction in output of liquid
metal from 95 to 8016. The finished metal of the experimental smeltings
was characterized by an increased P content and a reduced concentration of
gases and nonmetallic inclusions. As evidenced by macro inspection, sus-
ceptibility to flakes, mechanical properties of longitudinal and transverse
specimens at normal and reduced temperatures, by anisotropy and temper-
brittleness tendencies, the metal produced in experimental smeltings does
not differ from metal obtained by standard smelting methods.
1. Steel alloys--Production 2. Electric furnaces--Perfon-nance A.Sh.
3. Steel alloys--Properties 4. Nickel-Metallurgical effecta
Card Z/Z
sov/137-58-9-18574
Translation from: Referativnyy zhurnal, Metallurgiya, 1958. Nr 9. p 57 (USSR)
AUTHOR: Levin, A.M.
TITLE: The EYe7t of (:'onIdiItions of Wetting on the Process of Stir-
ring of Steel During Boiling (Vliyaniye usloviy smachivaniya na
peremeshivaniye stali pri kipenii)
PERIODICAL: Tr. Sibirsk. metallurg. in-ta, 1957, Nr 4, pp 171-178
ABSTRACT: Dimensions of bubbles breaking away from the bottom of a
steel smelting furnace were calculated for various conditions of
wettability of the furnace bottom by liquid metal. The volume
of the bubbles increases proportionately with the third power of
the contact angle 'Pand amounts to 10-800 mm3. By taking this
function into consideration, the well-known formulae for the
volume of the bubbles evolved and the degree of agitation of
metal produced by the bubbles were further refined. It is dem-
onstrated, by means of a specific example, that as the angle 44
varies from 200 to 1400 the volume of the bubbles appearing on
the surface increases approximately three-fold, while their
capacity for agitation of the molten njetal increases by 50%.
Card 1/1 1. Furnaces--O&ratlon 2. Metn1s (L quid)-Performnue S.p.
3. Mathematics
SOV/ 137-58-10-20613
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 10, p 39 (USSR)
AUTHORS: Levin, A.M., Danilov, P.M., Yeremenko, S.N.. Pravdina, T.E.
11_~
TITLE: Oxygen, Nonmetallic Inclusions, and Certain Problems of the Tech-
nology of Eltctric Steelmaking (Kislorod. nemetallicheskiye vklyu-
che.n,iya,i:riekotoryye vopros~ tekhnologii clek~roplavki stali)
PERIODICAL- Izv. vyssh. uchebn. zavedenty. Chernaya metallurgiya,
1958, Nr 1, pp 55-74
ABSTRACT: Specimens of metal were take du 1 13 heats of various
steels in 30-t electric-are, furnaces. [0 was determined by
the Herty method and by vacuum melting, the nonmetallic in-
clusions (N1) were determined by electrolytic and metallo- -
graphic methods. It was established that in low-carbon steels
(LCS) [ 01 at the end of the oxidizing period attains 0.0656, but
declines to 0.0256 when ready for tapping, and further to 0.0176
during tapping. In medium-carbon steels (MCS), 1 0 1 was
0.041-0.0116 at the end of the oxidizing period and dropped to
0.01jo when it was time for tapping. In high-carbon steels (14C.S)
0] fluctuates in the vicinity of - 0.0176 during the entire heat,
Card 112 and approximates 0.005% when ready for tapping. It is found
SOV/ 137-58-10-20613
Oxygen, Nonmetallic Inclusions, and Certain Problems (cont.)
that only in the LCS did ( 0 1 diminish to less than equilibrium with C during
period of Fe-Si and Al deoxidation, while in all other cases it was higher
than the values in equilibrium with C. The most pronounced diminution in( 01
occurred during the slagging off of the oxidizing and the making of the white
slag. Upon deoxidation of the Si, the LCS first displayed a pronounced dim -
inution in [01 , which later slowed down or ceased completely, while in MCS
a smooth drop in[ O)was observed, and in 14CS there was no change in ( 0 1 in
the ma ority of cases. During tapping there was a pronounced reduction in
I ij
(0 n the LCS, a less pronounced reduction in MCS, while both decreases
and increases in [0) were observed in HCS. On deoxidation, the Si contents
of NI in LCS rose on the average from 0.0038 to 0.028816 and then declined to
0.0116 at the time of Al addition, subsequently rising to 0.02921o, and declin-
ing again to 0.0116 during tapping. A similar regularity was also observed in
MCS, but in 14CS the NI contents fluctuated - 0.0071o, did not increase after
Si deoxidation, and increased after Al deoxidation to less than 0.01016. The
data obtained are taken as good cause for recommendation of intensified
deoxidation of the steel at the outset of the reduction period by use of com-
plex deoxidizers and addition of Fe-Si to the slag in addition to Fe-Si, as
this makes for a shorter heat. Bibliography: 7 references.
1. Steel--Production 2. Induction furnaces--Operation 3. Steel A.Sh.
Card 2/2 --Impurities 4. Oxygen--Performance
SOV/ 137-58-9-18620
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 9, p 65 (USSR)
AUTHORS: '.~e~~~amarov, A.D.
TITLE, The Minimum Silicon-carbon Ratio in Killed Steel (0 minimal'-
nom sootnoshenii mezhdu soderzhaniyem kremniya i ugleroda v
spokoynoy stali)
PERIODICAL: V ob.: Staleplavil'n. proiz-vo. Moscow, Metallurgizdat,
1958, pp 3-10
ABSTRACT: A theoretical analysis shows that the minimum amount of Si
needed to deoxidize steel depends upon its C contents: When C
rises from 0 to 0. 1~9 it increases from 0 to 0.0816; when the C
content is 0. 1-0. 16016. 0.08'16 Si is required, while with 0. 16-
0.3059 C the Si requirement is 0.08-0.231a. and with 1.4-4.316 C
the amount of residual Si diminishes from 0.23 to hundredths of
a per cent. To verify the theoretical conclusions, experiments
are conducted on the deoxidation of carbon steels of various
compositions melted in an 80-kg electric furnace with 180-kva
transformer. 130 experimental ingots of 2.2 kg weight were in-
vestigated and confirmed the theoretical principles established.
Card 1/2 The experimental and theoretical curves of ratio of ingot
SOV/137-58-9-18620
The Minimum Silicon-carbon Ratio in Killed Steel
I , density to C and Si contents are similar in quality and in good quantitative
agreement.
L. K.
1. Steel--Proceasing 2. Carbon--Theory 3. Silicon--Theory 4. Steel--Test
results
Card 2/2
18(5)
SOV/146-59-1-8/19
AUTHORSi Candidate of Technical Sciences; Tedir,
io.I.i Glazovo A.N.; Monastyrskiy, V.Ya.; Chernenkop A.D. and
Alyavdinj V.A., Engineers
TITLEs Metal Refining In Intensified Smelting of Structural Electric.
Stooll(Rafinirovaniye metalla pri intensifikatsii plavki koh-
struktsionnoy elektrostali)
PERIODICALt Izvestiya vysehikh uchabnykh zavedenly - Chernaya metallurgiya,
-1959, Nr 1# pp 71-81 (USSR)
ABSTRACTt Comparative tests were carried out on kinetics of harmful im-
purities with the use of conventional and experimental methods
of structural steel smelting. The basic peculiarities of the
experimental technplogy which caused intensification of smelt-
ing and reduced tho.-smeltlng time by one hourl ~ncludedt do-
phosphorisation during the smelting processi use of gaseous
oxygenj termination of smelting combined with oxidizing blow-
ing-throughl reduced quantity of burning-out carbonj preliml-
nary deoxidation with silioo-manganess and early addition of
forromilicon plus ook* duAp and ferrochrome; metal treatment
Card 1/3 by slag of the Same metal at the moment of discharge. Results
SOV/148-59-1-8/19
Metal Refining in Intensified Smelting of Structural Electric Steel
of the tests- were compared and the following conclusions were
mades Dephosphorization did not depend on the basicity of the
slag and on the temperature, whereas the ferrous oxide content
bad a strong effect on phosphorus distribution between the
metal and the slagl due:to metal treatment by slag of the same
metalp the desulfurisation rate In the test method was higher
than In the conventional technologyj a strong effect of ferrous
oxide on the desulfurisation coefficient in the ladle was ob-
served and therefore slag deoxidation prior to the discharge
was imperative. -The decrease of burniflg-out carbon did not
.Indrsase the hydrogen content, -Preliminary deoxidation and
early addition of ferrosilicon dust caused speeded-up elimi-
nation of oxygen. Prior to the addition of agents with higher
reducing capacities than those of carbon, the oxygen content
depends on the carbon content and# in the case of "l2KhNZA"
steel on the silicon content. Mixing-of the metal with the
slag caused a decrease of the oxygen contept during the dis-
charge# The determination of non-metallic Impurities was
carried out by Engineer S,N. Toremenko# who stated that# In
spite of the shortened reduction times intensified deoxidation
Card 2/3 created favorable conditions for eliminating impurities. The
i3OV/133-59-4-10/32
AUTHOR: . 1-evin A.M. Docent,. Teder, L.I., Monastyrskiy,V.Ya.,
W2'o~v,. ~., ~lyavdin, V.A., and Chernenko, A.D.,
Engineers
TITIS: Intensification of Smelting Structural Electric Steel
(Intensifikatsiya plavki konstruktsionnoy elektrostali)
P&RIODICAL: Stall, (1959, Nr 4, pp 323-327 (USSR)
ABSTRACT: An investigation of the possibilities of intensifying the
electric smelting process carried out on the Kuznetsk
Metallurgical Combine during 1956-1957 is described.
For this purpose 100 heats of structural steels were
carried out (table 1) in which the following methods
of intensification of smelting were tested: 1) the
use of oxygen for the oxidation of admixtures;
2) combining of the end of the malting period with the
beginning of oxidation; 3) dephosphorisation of metal
during melting;
4
decreasing the amount of burned out
.
carbon (up to 0 2% ; 5) intensification of the
~
deoxidation by the use of a preliminary precipitation
deoxidation with complex deoxidants and with an addition
of powdered ferrosilicon after the making of a reducing
Card 1/3 slag together with povxlered coke; tapping of metal
0
"Ov/133-59-4-10/32
Intensification of Smelting Structural Electric Steel
together with slag with an energetic stirring;
6) intensification of the desulphurisation process;
7) intensification of alloying by starting it at the
beginning of the reducin6 period. The comparison of
changes in the compooition of motal and slag during
smeltinE; by the u6ual and experimental practices for
steel 40Kh is (,,iven in Fig 1 and 2 rospectively, the
comparison of mechanical properties of metal produced
by the usual and experimental practices - table 2.
Mean duration of the individual smelting periods and
whole heats - table 3. It is concluded that the
experimental technology of caelting electric structural
stools can be used wita advantage. The investigation of
the metal produced by the experimental technology
indicated that it is of satisfactory quality which was
confirmed by a considerable decrease in the proportion
of out of grade steel (from 0.872 to 0.186%). The mean
duration of a heat is decreased by 1 hour which under
operating conditions of the melting shop on the work
Car(i 2/3 increased the productivity of a furnace b7 14% and
SOV/133-59-4-10/32
Intensification of O"Meltins Structural Electric Steel
decreases the specific power consumption by 80 kwhr/ton of
steel. There are 2 figures, 3 tables and 11 references
of which 9 are Soviet p I German and 1 American.
ASSOCIATION: Sibirskiy bletallurgicheskiy Institut i Kumetskil
Metallurgicheskiy Kombinat (Siberian Mietallurgical
Inatituto and the Kuznetsk Lletallurgical Combine)
Card 3/3
DAM&ROVg A.D.1 TMATOGUZGVt N.V.; ZLRVINp Te.Ya.; TIKCRH&Nv V.P.1 LEVINg
.A.M.; GUM9 i.K.
Yaking manganese alloys from Una deposit mangenese ores. Izv. vys.
uo,heb, say.; chern. met. no.1246-54 160. (KIU 14: 1)
I
I. Sibirskiy zetalIurgioheekiy institute
(Una Valley-Mauganese ores)
(Hapganese alloys-Metallurgy)
ZARVIN, leeraol KUWQVp A4D~; TOLOTOGUZOV9 N.V.; GUROV9 A.K.1 -IZVINj -AvMv-j-
TD#49RKAJI# V*P#
'Use Qf silloomanganoe. made of Us& ores for the reduo#ion of
steelo Isve vpe uobebo sav*; cherne mete U9912155--62 160o
1. Sibirsidy metallurg4oheskii iwtitut. (KMi 14il)
Usa Vs.U9v--QmdeMsltir)
MlicaWmanganese anoys)
GUTERMAN,, B.L.; LEVIN,_A.M,.-
Technical and economic evaluaticn of the process of simultaneous
production of phosphorus and aluminous cement. [Trudy) NIUIF
no.164tlO3-104 159. (MIRA 150)
(Cement industries) (Phosphorue industry)
EMORAL, Fedor Prokoplyevich; FILIPPOVp Anatoliy Fedorovich;
1RAKWVp A.D., prof., doktor tekhn. naukp retsenzent;
TOLSTOGUZOVj N.V., dots., kand. tekhn. nauk, retsenzent;
LEVIN, A.M... retsenzent; VISWAKOV, A.Vop retsenzent;
WST'rx--P retsenzentj SHVEDOVp L.V.p red.; ROZENTSVEYG,
Ya.D.p red. izd-va; MIKHAYLOVA, V,V,, tekhn, red,
(Calculations on
alloys]Raschety
Izd,2e, ispr. i
(Steel-Electrometallurgy)
(Iron alloys-Electrometallurgy)
the electrometallurgy of steel and ferro-
po elektronetallurgii stali i ferrosplavov.
dop. Moskva, Metallurgizdat, 1962. 230 p.
(MIRA 15:12)
LEVIL-Awb4i GLAZOV, A.N.; VERSHININ, V.I.; DANILOV, P.M.; PASHCHENKO, V.ye,
Characteristics of the production of catalyzer steel with a low
addition content, Izv, vys. ucheb. zav.; chern. met. 8
no.lOt62-68 165. (MIRA 18:9)
1. Sibirskly metallurgicheakly institut i Kuznetakly metallurgi-
cheskiy kombinat.
LEVIN, A.M#; SALIKHODZHAYEVp S.
Developing and tooting a burner with a metal not emitter.
Gaz.prom. 10 no.2t14-18 165-
(MIRA 18i12)
1. 95Ai -6 F'A'P(M)/jFPE41 13.) - P'4EX24 t )/-UR(b)/UACh) WRC Q) JD/jG
A%.,-- NKS-AP5026783- - -----SOURCE- CODE UR/0286/65/000/017/0069/0069
INVENTOR; Levino Ao ;Ms; El'sanovich, V. N.; Zhorova, L. P.
ORG;- none
TITLE: 'Tantalu2:18se alloy. Class 40, No.. 174366
SOURCE: Byulleten"izobreteniy I tovarnykh znakov, no. 17, 1965, 69
TOPIC TAGS! tantalum alloy, niobium containing alloy, rheniul?1ontaining alloy
17
ABSTRACT: This Author Certificate Introduces a tantalum-base alloy.vith improved
physicomechanical and technological properties containing 25-352 niobium and
1-10% rhenium. JAZ)
SUB CODE: ll/ SUBR PATE: 25Jan64/ ATD PRESS: 114161-
UDC: 669.294-S
--.L0231"7 ENT(I)/r I
ACC Has AR6oi6569 SOURCE COM UR/0196/65/000/012/TO19/TO
AUTHOit Uvin, A. X. -, Bryukhanov, 0. N.
TITLE: Iffect of radiative reflux from a heated component on the operating at&-
bility of Infrared San burners
SOURCE: Refs sh. Elektrotekhnika I energetiks, Abe. 12T75
REP SOURCE: Ob. IspolIz. gaza v nar. kh-ve. Vyp. 3. Saratov, 1965, 170-174
TOPIC TAGS: IR radiation, IR source, radiation effect, radiative beating
ABSTRACT: The authors study thet effect which radiative reflux from the article
being heated has on the warm-up of ceramic plates and the operating stability of
infrared beaters. Matural gas was used in the tests. The specimen used for best
Ing was a 1 = plate made from grade 3 steel. Ceramic plates perforated with hol;s.,
1.55 = In diameter were tested. The results of the study show that an Increase In
the beat radiated tW the specimen and an increase in the temperature to which the.
plate Is.beated results In the possibility of flame breakthrough and reAuces the
reliability of 1~,-ftared burner operation. Radiative reflux diwing drying and other
types of law-tem-l-erature treatment has no effect on the stability of bumer opera-
tion. 3 illustraMonsq bibliograptW of 4 title@. (Laboratory of Oas Devices].
L. Tragova. EWL'uslation of abstract] 7
SUB CODR;
wd 112 6 ~2 UDC; 662.95jL.2
L 08193-67 . EYr(m)/EWP(W)/EWP(t)/E`rk L~P(c) JPIJG,_
ACC NRI AF6030502 (A)- SOURCE- CODF..- -ti~-161'i~Ialoo-olOO~lOl-f770'fid
4
AUTHIOR: TAvin. -A.- M. iZhor~ova, L. P.; Elmanovich, V. 11.
ORG: Moscow Institute for Stool and A110,73, Dopartinont of the Metallurgy of
Nonferrous, Rare, and Radioactive Metals (Rokomondavana kafodroy motallovodeniya
tsvetnykh, rodkikh i radioaktivny,ch motallov Moscovskop instituta stali i splavov)
ITITLE: Effect Of Alloying olemonta on the electric resistance of a tantalum-niobium
jalloy
SOURCE: IVUZ. Tsvetnuya motantwgiya, no. 4, 1966, 117-120
TOPIC TAGS: eleotri~ resistance, tantalum containing alloy, niobium containing alloy
ABSTRACT: The choice of a tantalum-niobium alloy wa5 dictated by the fact that these
metals have a resistance at 200 about 2-5 times greater than that of tungsten and
riolybdenwn, and that -they recrystallize without an Increase in brittleness, since the
.solubility of gases in them is groater. In addition, tantalun and/niobluz-i have bettor
A.
industrial properties than tunGston and molybdonum; the ductilitAf a tantalun base
alloy romains high with the introduction of any desired amount of niobiun. A tantalum
alloy with from 30 to 35% niobium has bo~in found exporimontal1y to have the higha3t
spe2i.fiAhesista~c'D0of any binary alloylo'f the Ta-Nb syston. The electric resistance
of this alloy at 20 is 20 microohm-cm, and at 15000. 90 microohm-cm. Alloying
1/2 uDc. 669.o1
L 0819347
AP6030502
elements wore Me, Rep V, Zr, and Ti. that is, metals which Form nolid rollitions w1th
tantalun and niobium. 7ho alloying olomontn wore added to the 1,ano n1loy in tho
following amounts: 1-10% 119- 2-5% ljo; 2-10*,4o V.- 5-20% Zr; and 5-20% Ti. It wa,, found
that addition of M21jbdenum~lEhonium",Ind vanadiur~,- amount- Orre-ponding to Uio
increase in bhttlenoss,
chosen upper limits leads to a marked ~1' Exporiments wore
carried out on tho electric resistance of alloys containing rhonium, molybdenum,
vanadium, and titanium. It was found that the highest specific resistance at 15000
was exhibited by an alloy containing 4% Re, and 3.5% V (105-110 microohm-cm). The
overall conclusion is that those alloys show promise for uso as heating elements in
electric vacuum equipment@ 'Orig. art# has., 4 figures and I table.
SUB CODEs 11/ SUBM DATEs'.,25Fob65/ ORIG REF-. 001/ OTH REF-. 001
electrical recietanoe alloyn
dda
ACC N" AP7002868 SOURCE COD91 UR/0149/66/000/006/0146/0149
AUTHOR: Levinj AdMa Zhorova, L~P,
On: none
TITLE: Effect of alloying elements on the d.eformability of rhenium
SOURCE: IVUZ. Ts'vetnaya metallurgiya, no. 16, 1966, 146-i49
I
TOPIC TAGS: platinum containing alloy, yttrium containing alloy,
vanadium containing alloy, rhenium base alloy, molybdenum containing
alloy, tungsten containing alloy$ zirconium containing alloys titanium
containing alloy, niobium containing alloy, tantalum containing alloy,
alloy cold reduction, metal deformation, solid solutions solubilityt hardness
ABSTRACT': Ingots of rhenium, alloys containing 1.28 and 3.33% Mo, 1.08 and 9.31% W,
0.9 and 1.4% Nb, 0.5 and 1.14% Ta, 0.63 and 1.0% Zr,'2.94 and 27.3% Ti,
17.73 and 38.52% V, 0.3% Y, or 1.86 and 5.7% Pt were melted from 99.98%-
pure electrolytic rhenium powder in a nonconsur-tble electrode are furnace
'in a helium atmosphere, and investigated to determine the effect of
individual alloypg elements on the alloy structure and deformabUity.
card 1/2 UDC t 669.849
ACC MRs AP7002
All alloys i ntained eibotit 0 01Z 02 and 0.005% H2- Aft6ys containing
9.31% S li2co Mo, 5.7% Pt, 0:63% Zr or 0.3% Y were found to be single-
phase sol disolutions of these elements in rhenium. Alloys containing
0.9 and 1.4Z Nb, 1.0% Zr, 1.14%Ta or 2.94% TL had a two-phase structure*
:The solubility of V and Pt In rbenium reached 12 and 60X, respectively.
Ja, Nb, Zr, Ti, and Mo had a low solubility in rhenium. Ti and Zr
additions produced the highest increase In the hardness of the inveati-
.gated alloys. Nb and Ta additions produced a somewhat lower hardness
increase, while Mo, W and Pt additions, especially in small (up to 2%)
amounts, produced almost no increase. Rhenium containing 0-0102 and
0.005% H2, are-melted in a pure helium atmosphere, sustained a cold
zeduction of about 9%. The addition of 1-9% W, 1.0% Zr or 1-3% Mo
rincreased the permissible cold reduction-to 23-26%, 19%,and 17-19%,
t:respectively. Nb, Ta, V, Y, and Pt additions in amounts up to several
,percent have practically no effect on the deformability of rhenium. The
!majority of the investigated alloying elpments increased the work
1,hardening of rhenium in cold rolling, although no direct relationship
.between the work hardening and deformability was established. For com-
1plete stress relieving, work-hardened rhenium and its alloys should be
lannealed in.a vacuum or in hydrogen-at 1800C for 0.5-2 1w. (WA-881
...i - .. ... -- . *_ -1 1 . .- . . [MS)
SUB CODE: 11 9 13/ SUBM DATEs lhHar65/ ORIG REFt 001/ OTH REFt 002
ATD PRESS: 511h
Card 2 /2
LIMP 1461 TTMI~
cr tift It off -- - - ftt~v mv no- s2WQ06
% omm lasu)
--, I - . -.- ~- .
- -- - - - - -- -- - - - - - ---- -- ---
L"Virl. A. :.,.
Mr., Aerophysiological Dept., Ukr. Inst. 30cialist Aericult, -,r0, k-har'yOvl 1~4' 1.
"Concerning the Nourishaent of the Spring Wheat by Aneral -iaterial
Through the Leaves," Wk. AH, 28, 110- D, 191W-
LXVIN, A. H.
Oak
Vegetative propagation of the *cher,-y" oak b.-1 rooting slips. Let. khos. 5 no. 6. 1952
9. Monthl List Of Russian Accessions, Library of Congress, Augusto -195A,2Uncl.
66 Z7
USSR/ tiva`t//U'~ ~ns":-~4tatoeso VegeW--`,%sj Melons,
Abe Jour : Ref Zhur - Bioli.. No 3) 1958, loB62
Author : Lavinj, ASH.
Inst, Fruit and Vegetable Institute 'men' Michurin
M-3
Title Composition of the Proceeding Fertilizer Used on Melon
'Crops&
OrIg Pub : Tro Plodoovoshchn. in-ta, im. i.v. michurina., 1956., gs
245-251
Abstract : In w9eriments conducted in the Fruit and Vegetable Ins-
titute from 1949 to 1952 it was determined that PC.. vhen
applIed in the holeep has a positive affect (in 1952 the
increase in cantaloupe yield comprised 55% above the
1,36*1 centnere/heatare harvest aehieved vithout fertili-
zation). Adding-N or MI to the holes gave insignificant
yield increases and caused some of the plants to fall
Card 1/2
-Uej,
7 15 1 9
3v 1 - I
r L la I i~a2n;.
q ri ti- 1, A
t' L
,tJ.t 11
1% tA!1 1- -A
the yl,~ LA
If
j-jr-) ;-,,s t ty" -",e
L -
:;oatrib tjl~
s re ~:Znter,~. In towori uy 1 . 1,6.
In w3aon;
q;; 0e a 3 : .1 of 5-4~->-
r ro.~,j ja -j
A
7(1)
AUTHORSt Voltftovich, s. r., Turchin, F. v., SOV/64-59-2-5/23
roffe, YA. A.* Levin, 1. )J.
TITLIt Prospects of the Production and Application of 11ineral Fertilizers
in Mat Siberia (Perepektivy prolavodetva i primmeniya
mineralInykh udobreniy v Vostoohnoy Sibiri)
PERIOMCALs Xhimicheskaya promyshlennost', 1959, Nr 2, pp 112-115 (USSR)
ABSTRAM If all seed areas in East Siberia (ES) were to be supplied with
mineral fertilizers (W) in the normal do9age, a yearly amount
of 40WW T of N 2# 426M T of P205, and 514000 T of X.0 would be
necessary. Data concerning this subject published by the Sovet po
izuoheniyu proizvoditellnykh sil prl JW SWR (SOPS) (Courcil for
the Study of Productive Forces at the AS USSR (SOPS) are lower
because woods and meadows were not taken into aocount.With respect
to the industrial development in CES1 for the coming 7-10 years a
yearly amount of 60000 T of N 21 100000 T of P105' and 60000 T of
K20 would be necessary for a systs--matic supply an4 to
pre-calculations for the year 1975 (for 6600000 heotaras)
CILrd 1/3 205000 T of N2, 211OW T of P 205t and 1WOOO T of K 20' The
prospects of the Production and Application of Minerva SOV/64-59-2-5/23
rertilizers in East Siberia
assortment of the (UP) should consist mainly of concentrated (MF)
in order to reduce transportation costs. The high percentage of
tiansportation costs in the price of simple "rphosphate its
illustrated in a table for 3 works of fertilizers (Table). Besides
ammonium nitrate,'ures (with 43% 52) Lis an important Iff as well as
the combined nitrogen-phosphorus-potansium fertilizers are an
important bratich of production; in this connection nitric acid
treatment of phosphates to nitrophon and nitrophosks. is of special
interest. For the development of a pbo8phorus fertilizer industry
by extraction of phosphoric acid from natural phosphates only
the remote Norillsk complies with The corresponding prerequisites.
The following deposits are taken into consideration for the
production of UP in XSs The problem of exploitation of the gypsum
deposits in the Irkutsk and other areas has still to be
investigated. The phosphorite deposits at the latanga, the &"& of
the tributary of the Ten1sV%Ia&m=n&y& TmWiska (Ref 1), which
an already being exploited, as well as the areas near Slyudafflra
and on the Lek* Baykal, the phosphorite deposits between the
Card 2/3 Angara-11i district and the Bratsk Elootric-power Statio~ as well
Prospects of the Production and Ipplication of Mineral SOV/64-59-2-5/23
Fertilizers in East Siberia
as the biggest phosphorite deposits of Mdbiny and Kara Tau. The
'three power plants in Bratsk, Krasnoyarsk, and Tenisask. are
regarded as the basis of the production of concentrated fertilizers
from electrothermal phosphoric acid, the capacity of wbLdh is
computed. Potassium fertilizers will not be produced in 19 before
1965, tbey will be supplied from Beremni" and Solikamsk. Borine
fertilizers may be produced from the Kara Ton phosphorites
containing 36% P205 and 7-8% I~BO3 * According to approximate
calculations, capital investment for a complete supply of ES with
nitrogen- and phosphorus fertilizers will be approximately 4 billion
rubles. If potassium and phosphorus prospecting proves to be
successful and the necessary industry will be built up in ES, -the
total sun of oapiW investment will rise to about 5,2 billion
rubles, There are 1 table and 4 Soviet references.
Card 3/3
LEVINO A,M,; TSYPINA, E.I,
Economic analysis of 6uperphosphate producticn. [Trudy) IGUIF
yto-16404-95 '59. (MIRk 15:5)
(Phosphate industry)
LEVIN, A.M.; PIMENOVA, R.I.
Prospects for the production of sulfuric acid by the use of
oxygen and high-concentration sulfur dioxide. (Trudy) NIUIF
no.164t95-96 159. OCRA 15:5)
(Sulfuric acid industry)
LEVIN A*M.; IVANOVA, T.H.
~-',
Technical and economic comparison of different forms or a
,pplying
and methods of preparing toxic agricultural chemicals. Trudy
NIUIF no.164t99-101 159. (MIRA 15s5)
(Insecticides)
LEVIN, A.M.; IVANOVAv T.N.; GOLOVANEVA, A.N.
Prospects for the production of arsenic agricultural chemicals.
(Trud.Yl NIUIF no.164slOl-103 '59. (MIPLA 15:5)
(Arsenic) (Agricultural chemicals)
LAR
m
LEVIN# L.Me kand sallskokhovai0tv'ennAh nsukj SOKOLOVA, Ye.P.9 kand.
' Zi~;ic;e-skikb nmik
Effect of fertilizer application during planting on corn developmnt.
Agrobiologiia, no.2s290-292 Mr-Ap, 162. (KERA 15 s4)
I* Plodoovoohcbnoy institut imeni IsVeMichurinap Hichurinsk.
(Corn (Mmise)-fortilizers and manures)
ROSOTSIXIT, I.L.1 LVIN. A*X.
Compressible ps flow without separation In a diffuser at subsonic
velocities. DepeAN t= noAs50-55 048. (MM 9:9)
1.1natitut gldrologit I gidretakhniki Akadeall nauk Ukrainalkol Role
Pr*dstavleno, dlyinim ohlepon AN URDR GeTeProskuroyu.
(Gas flow) (Diffusers)
13
S"--JdMhL&jG Pli~d" *I Md bc6*&AW4V FOIVA ID VUM
"Odowswi I km
states that investigations, descriVed in wdsting literature# on
dif fuseiv do not clearly answer the question ooncerning the location of the point of
hreakof!' for various angles of widening and that most exptl worts show that breakoff
occurs :'or a certain vilue of the angle widening in a diffuser and do not indicate
at what distance from the point section breakoff occurs at this angle. Iolves the
problem., Presented by Arad A. I. Wakrasoy 1.4 Jul 1952
254T100
LEVIN, A.H.
Method of'calculating the accumulative capability of gas Piping
"RABOTA ILKONSTRL=IYA GAZOVYKH PECHEV (operation and Construction of Gas ovens),
Academy ctf Sciencesp ukrainian SSRj 1953, p. 28.
UnN, A.M., kandidat tekbnicheskikh nauk.
- Im. am% 0 low 0 0 4OZA
Method for calculating the storage capacity of gas pipes.
Trudy Inst.1sp.gasa AN UM 1s28-29 t53. (MIft 9tO
(Gas pipes)
WIN, A.M., kandidat tekhnicheskikh nauk; SIGAL, LTS., Inshener.
I
WUWN%rvw?m
2ffect of furnace draft on the operation of gas injector blow pi-
pes. Gor.khos.Nosk# 28 n0-9:23-27 5 154. (VI-DA 7:10)
(Burners) (Boilers)
0-=Angj;n" rowcbwdcs
Hyd
Card' I 1A.
Authors
I -Levin, A. -M.
Title, .1 Hydraulia jump and boundary layer separation
Periodical DAL AN SSSRj 961 Ed# 6p 1121 - 1124, June 1954
Abstract t It was experimentally established that the transition of a flow from tur-
bulent state into stable is a favorable condition for the origination of
the complex phenomenon called the hydraulic jump. If the free surface
of the stream increases sharply and the pressures are nonuniformly die-
tributed in depth then we have a hydraulic jump with surface roller even
during calm condition of the stream prior and after the hydraulic jump.
Three Teferences.
Institution i Acad., of Sao Ukr-=j Institute for Utilization of Gas
Presented by i -Academician A.,I. Nekrasov,, March 17, 1954
I SOV/124-57-3-Z923
Translation from- Referativnyy zhurnal. Mekhanika, 1957, Nr 3. p 41 (USSR)
AUTHOR. Levin, A. M.
TITLE: Investigation and Design Calculation of Ejector-type Gas Burners
for Industrial Furnaces (looledovaniye i raschet inzhektsionnykh
gazovykh gorelok dlya promyshlennykh pechey)
PERIODICAL: Tr. In-ta Ispol'zovanlya gaza AN SSSR, 1955, Nr 3. pp 67- 101
ABSTRACT: A hydraulic method of design calculation is described for ejectors
equipped with a cylindrical mixing chamber for subsonic velocities
of gas flow. The results of an experimental investigation of a gas-
injection nozzle cited in the paper agree very well with the calcula-
tions. A nomogram designed for a natural-gas - and- air -mixture
injection nozzle is included to facilitate the solution of the pertinent
equations for the ejection flow. Bibliography: 18 references.
Yu. A. Lashkov
Card 1/1
LIVIN, O.X.
Increasing the capacltjr of lov preamwe gn-pipe systo- nod savIng
metal In their mawdacture, Tiffift AN URfM 26 n0-2:53-35 r 133.
(Gas pipes) WEBA 8:4)
-- LEVU, A.X.
Calculated gas pressure In low pressure systems* (ks.prow no.1:24-
30 A 156, Oau lo s i)
(Gas distributlon)
0
Z,etllv" a, ~,-' ;
Lgyjli, A.M.. GIMCHUMU. G.M.
..... ... - ~ -34 Ag 157.
utilizing of methane from mines. GA crom-vo-8:11 (MLRA 10: 7)
(Methane)
LEVp[L A. M.., (Cand. Tech. Sci.)
"Combustion of Gas in Atmospheric Burners"
(Tbaoj7 &A Pmetice of 0" CombustIOD; TMUMOtIalm CC & SCIOntif Ic "
T*a"aal VA*tU*) Lmlev"s Gw%qP"khlzfttv 1958- 343 V-
Lj V i ~) A P/I -
UMN. "1,.H.; IURUTIV, VAS; PAMOTSlay, A.Ve :) gas operation*
0 hroon water heaters from b&rd'fOgl t' (XIRA Ilt2)
ChAnIgIng Our* 158
as. prom. U0.2t20-23 7 lWater heaters)
JAVIN, A.H.
. Trudy, In t.16p.gass
Utilization off gks in wmicipal econor7 11
AN UIAMI no.61.3-15 158. (XIA 12:8)
(Gag burners)
AUTHORS: Levin, A.M. and Baum, V.A. SOV/21-58-10-8/27
----------
TITLE: The Dimensions of the Recirculation Zone in the Abrupt En-
largement of the Flow (Razmery retairkulyatsionnoy zony pri
vnezapnom rasshirenii potoka)
PERIODICALt Dopovidi Akademii nauk Ukrainelkoi RSR, 1958, Nr 10, pp 1064
- lo66 (USSR)
ABSTRAM The authors investigated the length of a recirculation zone
originated in discharging water from a cylindrical nozzle
into a circular cylinder of a larger diameter. The water
discharge varied from 0-5 to 10 cu m per hr. With an increase
in Reynold's number from He a 10000 to He a 509000# the
length of the zone increases, first rapidly and then more
gradually. At Re> 50,000 the length of the recirculation
zone is independent Of the Re-value. The authors derive an
empirical equation which shows the dependence of the relative
length of the recirculation zone on the ration of diameters.,
h=-CL-- : I = 9 , i~' V74 TiT7
Card 1/2
SOV/21-58-10-8/27
The Dimensions of the Recirculation Zone in the Abrupt Enlargement of th*
Flow
Experimental data agrees closely with the curve constructed
according to this formula. There are 2 graphs and 1 table.
ASSOCIATIONt Institut ispoltzovanlya gaza AN UkrSSR (Institute for Utili-
zation of Gas of the AS UkrSSR)
PRESENTEDt By Member of the AS UkrSSR, N.N. Dobrokhotov
SUBMITTEDs April 22, 1958
NOTEt Russian title and Russian names of individuals and inst1tu-
tione appearing in this article have been used in the trans-
literations
1. Fluid flow-Reyolds number effect 2. Nozzles-Performance
3. Mathematics
Card 2/2
LIVIS, A.M., kand. tekhn. nauk.; DkNIUVICH, Yu. I., insh,; HATMOV, G.P., inzt,
Gas dryer, Gor, khos. Hook. 32 no.lOt23-25 0 138. (min IIS11)
1. Illotitut illpollsovaniYa gasa, AN USSF4
(Drying apparatus)
is 093*41NMI,
loste Ovo-jv-sa
vd#j-j *2 avomj*4*2
11*111, 14A11 .9911-7gad
Stvwl
"i
1.6
4-.1w. out to awurs 1:.iv1Oj v I* OfTio;-olowl %/C
ITS
iv 041
votore zO, 0 lasted soxvi
0
;Xv Ofe J's 440
:
.
%W3 -8
fulvile .4 " 1.1 2o& "t
**ext *vt go "Yozeme at"JO 1041woo,
1--- .1% AT) A.W""it 0-.J%~V4% I , V443 It -0
it mw~q 84 fri-mm
**.As so 0. it eg.** SIT. #*%-It "wo-OT9 *0 A,
.^-* N .1% is lues-96 0" A*$ gym"
9-taosea wrluripit
'6%
xJV%#*jjj1 4.0-Upp jo, "Istoplost 6"13 ire
*.$vvu# .1% jo vallist"10 *%% %%041 0"99 VSOXTQ.,.-J1 , 1, '1
I *M&-Wt Do ft
I
S wallestwetel
Go^%viecret %v 41tov1vv-* is "torm Out
.'41 ve vowofw (In . .
.2:, evir.-Mvia .2
'Pow"t wltt to ev-listm ant.""a ad
0-ISA01021 *n ;0 o1 ..A %Set SO T.U0104 w;vjwSx -A -a
O"OS *%***%Its aides is W" *%jlqWu4
1"I OR 1"^& I.Mvw I'SRO *"" JaMut-'D -a
'to SAW Ot"I Pvt. MWIJV4 .."2041004" SO %I
W.91^4 JO ottIT01"do INMOS so
vj~. OTT Steel* ftrv**& or% wt TORTWO, '.%ftTt14m1 OTT So woom
a Is ~"stt"*Ot VIVO eloo,%ifte, Swome jo gove
wed,68104 IT-evo O""Orwo &U -4somp"Sedi" so
evvu"jlt:) *Avf~ft milur" Avowtwima wn pm
98.1jeft %1~69 vj 4* se-tillu"Osses is menvalpisdes on"
%% to
. wa , p t-c 4 joqmOot us "afttv4n wv item ***
OV1JVVVOJ;.v :9 VOTIA TIT) ~66"veft %Wsnwwt
t
90wrojeodws *" a* moof-v1*048 #see& 4o, Somodfres STU 643fw2m
0-0, U MI *ZJ94 koomm nT31cvvm
wor"TOW QAIV%W-JOJV*I) flowtol"if posex is O"orojow: ITM4
-4-".4c
--.4ftjZ 7-
LVIN9 A.M.
-
Increasing the gas Pressure with contribute to a saving of metal
in pipes.-Gsz. prom. 4 no.11.029-31 159. (MIRA 13:2)
(Gas, Natural-Pipellnes)
I )UMVSKIT# A.*To
Ylameless radiation injector burnerso GazoProso 5 noo3s
2o-24 Yx 160. (KM 13s6)
(age burnerm)
S1128V611000100310041008
A054/A127
AUTHORS: Levinp A. M., and Bryukhanov, 0. N. k-00
TITLE: Drying cores by means of infra-red gas burners
PERIODICALt Liteynoye proizvodstvo, no- 3, 1961, io
TEXTt In drying small-size cores, tests were made to replace the
electric infra-red lamps by infra-red gas burners, ow-3 /GII-3/ type,
400 1/h Capacity, 3P320 kcal/h temperature load, 57 - 60% of the total ra-
diation heat produced by the burners is reflected from ceramic plating heat-
ed to 800-9000C) ,. Infra-red gas burners are more reliable than electric
lamps and have also a higher radiation capacity (9 koal/sq cm), while the
dryin costs are reduced 6 - 10 times. However, when placing the test spec-
imen fmade of sand-olay mixp with a 8.5jet humidity content, and D - 66 mm,
H - 22 mm) at a distance-of 200 mid from-the burners, under a gas pressure
of 156 - 172 mm water oolumn,-with a surface temperature of 2200C, for a
period of 20 minutes, the core center was not dried. Upon raising drying
time, the core-edges got burnt. Setter results were not obtained even when
Card 1/2