FOIA
SCIENTIFIC ABSTRACT MARGULIS, D.K. - MARGOWSKI, J.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R001032320001-9
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
June 20, 2000
Sequence Number:
1
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
| Attachment | Size |
|---|---|
 CIA-RDP86-00513R001032320001-9.pdf | 4.29 MB |
Body:
Alternate Cutting Full Broaches (Cont.)
Call Nr: TJ 1250 M3
laboratory of the Chelyabinsk Tractor Plant and
called alternate cutting broaches. The book is in-
tended for engineerirg personnel acquainted with
broaches and broaching and may be used also by
students of engineering colleges.
COVERAGE: The alternate cutting broach design originated at
the metal cutting laboratory of the Chelyabinsk
Tractor Plant is preeently in use at other plants
like the KharIkov Tractor Plant, Kolomna Locomotive
Plant, and the KharIkov Transportation Machinery
Plant. Engineer P. P. Yunkin of the metal cutting
laboratory, Stalingrad Tractor Plant, is mentioned
as the developer of progressive broaches - an older
design. The alternate cutting broach design was de-
veloped by the author, D. K. Margulis, with engineers
A. A.Zalesov and S. A. Plekhanov. According to
the author the alternate cutting broaches 1) are
Card 2/12 significanily shorter than broaches of ordinary
AUTHOR: Margulis, D. K. Call Nr: TJ 1250 -M3
TITLE: Alternate Cutting Pull Broaches (Protyazhki
peremennogo rezaniya) Design and Calculation (Konst-
ruirovoniye i Raschet)
PUB. DATA: Gosudarstvennoye nauchno-tekhnichebkoye izdatel'stvo
mashinostroitellnoy literatury, Moscow-Sverdlovsk,
1956, 220 pages, 6,000 copies.
ORIG. AGENCY: Recommended for printing by the Technical Council of
the Chelyabinsk Tractor Plant.
EDITORS: Shabashov, S. P.; Tech. Ed.: Yermakov, N. P.;
Reviewers: Gavrilov, V '. N.,Eng., Kanashko, F.T.,
Eng., Katsev, Z. V., Eng.; Managing Editor, Ural-
Siberian Branch of Mashgiz, V. S. Kravtsov.
PURPOSE: The monograph considers the problems rf design, cal-
culation and manufacture technology of round and
Card,-1/12- spline pull broaches designed by the metal cutting
I . - r ^n' ' "T ". . ,
P, ". I I, I- , m T 1).
2. USSIP (600)
4. Drillir..~r am' Fcrin-
U
1. , 1 1 C' t;
7. Ra7,il driliin~ ~ " cast. Ir-m :-rrtr,. i 'Jistv. '~'. '--. ',) -,1,3.
9. Houthly List of Russian Accessions, Library of Congress, June- 1953. Unclassified.
MARGULIS, D. K., ZALFSOV, A. A-, KOSTENKO, -401. K.
Gear-Cutting Machines
Rapid gear cuttin,-,., Stan. i instr., 23, no. 1, 1952.
Dlonthly List of Russian Accessions, Library of Congress, x-Lay 1952. Lnclassified.
R)9 Pjjj~ a- /- I's D, A---~
mOT. A.A.; KOSTMO, K.L; HAMULIS, D.K.; DWYANOVICH, A.R., inzhener,
redakto!!; LOSKUTOT, V.V., kM=d&t-tethsiaheskikh nauk. retsentent;
DUGM. H.AL.. tekhnicheekiy redaktor.
(Diamondless dressing of grinding wheels] Pazalmaznaia pravka shlifovall-
nykh krugov. Pad red. A.R.Demlianovicha. Koskva, Goo.nauchno-tekhn. lzd-
vo mashinostroit. lit-ry, 1952. 77 P. [Microfilm] (KLEIA 7:10)
(Grinding wheels)
HARGULIS B.Ye. (Smolensk); MARNYANSKIY, I.A. (Rovno)% ORMOV, P.S.
il-zhevsk); ZYABLITSKIY, V.V. (Kalinin) M
Extracurricular work in mathematics. Hat. v shkole no.1:6j~-75
Ja-F 163. (MIRA 16:6)
(Mathematics--Study and teaching)
MURGULIS, D.Ye.
Simplified derivation of Grarer's fo=alae. Uch. zap. smol.
gos. peed. inst. No.10257-61 *62. (MIRA 17: 1)
,994~A~, B~Oris Y~MOYOvich; LAPKO, AJP., red,; YEPLKAKOVA, Yo.A.,
takhn.rea.---------
[systems of linear equations] Sistemy linainykh uravnenji.
Moskva. Clos.izd-vo fiziko-matem.lit-ry. 1960. c0+ p. (Populiar-
nye lektaii po matematiket no.34). (KIRA 14:2)
(Ldnear eqnations)
1. MCRJLISl B. E.
2. TISSR (6oo)
4. Kudryavtsev, V. A.
7. Brief course of higher mathematics, V. A. Kudryavtsev,, B. P. Demidovich.
Reviewed by B. E. HargulAs. Usp# mat* nauk, 8, no. 2p 1953.
9. Monthly List of Russian Accessions, Library of Congress, April -1953, Uncl.
MIARGULIS, B. Ye.
Calculus, Integral
Some shortcomings in the manuals of Acad. N. N. 1.uzin "Differential caicull..;" and
"Integral calculus." Reviewed by B. Ye. IM-ir-,ulis. Usp. mat. nauk 8, No. 1, 1953.
9. Monthly List of Russian Accessions, Library of Congress, June 1953, Uncl.
KARGULIS.B.Ye.
Some shortcomings in the establishment of a course In higher
mathematics vith regards to training hydrologists and climatolo-
gists in universities. Keteor.i gidrol. no.1:46-51 Ja 152.
(KLRA 8:9.)
1. Gosudarstvennyy universitot, Chernovtoy.
(Hydrology--Study and teaching) (Climatology--Study and teaching)
KHARAGORIYEV, S.Ye., inzh.;,MAMULIS,, B.P., inah.
Scrap-metal preparation shops in machinery plants. MasbAnostroen-le
no.4:5&60 JI-Ag 163. (MIRA 17:2)
1. Ukrainskly gosudarstvennyy proyektnyy institut stankostroitel'-
noy promyshlennosti.
KAPKOVA, Z.I., dotsent; MARGULIS, B.A.
Glinical course of food poisoning caused by Salmonella typhi-
muritp in children. Top.okh.mat.i det. 8 no.3:46-49 Ur 163.
(MM 16:5)
1. ITkafedry detskikh infektsionnykh bolezney (zav. - dotsent
A.D. Pevzner) Khartkovskogo meditsinskogo instituta i 21-y
Detskoy infektsionno bollnitsy (glavnyy vrach N.N. Yezhik).
(FOOD POJSOVING~ (SAMONELLA BIMTIONS)
POTOTSKIY, Mikhail Vladimirwrich,-. MARGULIS, A.Ya... dots., retsenzent;
SHOLASTER, N.N.,, dots., dots.,,
ratsenzent; SHABASHOT, T.K.,, retsenzent (Noginsk); NIKITINA,
N.I., red.
(What is being studied in a mathematical amlysis course]
Chto izuebaetsia v kurse matematicheskogo analiza. Moskva,
Prosveshchenie, 1965. 86 p. (MIRA IF,:8)
MARGULIS, A.Ya.
Isidor Aronovich Gibeh; obituary, Wo v shkole no*2:86 Mx-Ap 163o
(MIRA 164)
(Gibeh, Isidor Aronovich, 1883-1963)
MARGULIS, A.Ya. (Moskva)
In the secondary school section of the Moscow Mathematical
Society (34th year). Hat.v ilikole no.6281-M N-D t62.
(MIRA 16a1)
(Kathematies-Study and teaching)
I
I
I
I
I
MARGULIS, A.Ya. 0)reiKhovo-Zuyevo)
"Graphic method of teaching physics" by L.I.Reznikov. Reviewed by
A.IA. Margulis. Mat. v shkole no.2:71-72 Mr-A 162. (MIRA 150)
ll~
(Physics--Study and teachine
MARGULIS, A.Ya. (Moskva)
In the Moscow Mathematical Society. Pat. v shkole no.4:15-17
Jl-Ag 161. . (MIRA 14:8)
(Moscow--4-tathematical societies)
BEREUITSKATA, Ye.S.; Margulis, A.Ya.
Aleksandr IAkovlevidh Khirchin; obituar7. Yat.v shkole no.l:
77-79 Ja-F 160. (MIR-k 13:5)
(Khinchin, Aleksandr IAkovlevich, lR94-1959)
MARGULIS, A.Ya. (Orekhovo-Zuyevo)
Investigation of problems. Mat. v shkole no-3:90-93 1-47-Jo '59.
(1AIRA 12:9)
(Geometr7--Problems, exercises, etc.)
N\1
~j!
RNZNIKOV, L. I. (Koskva) .. MMULIS, A. Ta. (Orekhovo-Zuyevo)
Interrelation of mathematics and physics courses. Kat.v shkole no.l:
24-27 Ja-F '57. (MM 10:2)
(Kathematics-Study and teaching)
(Physics--Study and teaching)
MARGIRS5, A.U.
use of compressed wood in the muchinery Indu2try of K,,j7j-.ct2p,
Basin. Ma3hinostrol*lcll no.5:41-42 My 16~~ (,-1:7?
.. i;n t ."/
SITNIN, V.K., red.; BARNGOLITS, S.B.,
UA~~S ~A-,-red.; METT,
red.; SYCHEV,~N.-G-., red. -
red.; BYCHKOV, P.S., red.;
G.Ya., dots. red.;' KAZANTSEV,A.I. ,
- - 41,
[organization and methods for the economic analysis of the work
of enterprises; transactions) OrgAnizatsiia i metody ekonomiche-
skogo analiza raboty predpriiatii; trudy. Moskva, Gosfin-
izdat, 1963. 60'.S pe (MIRA 17:4)
1. Vsesoyuznoye nauchno-tekhnicheskoye soveshchaniye po or-
ganizatsii i metodike ekonomicheskogo analiza raboty pro-
,,myshlennykh predpr4Atiy. lst, Moscow, 1963. 2. Predsedatell
k0miteta ekonomiki i organizatsii proizvodstva tsentrallnogo
prkvleniya Nauclmo-tekhnicheskogo obshchestva mashino-
str'64tellnoy prorVshlennosti (for Nett).
-XAAPULIS~IA.Sh., otv. red.; MEDVEDEVA, R., red.izd-va; TELEGINA, T.,
t~. red.
(Daily accounting and control over the cost of production]
Ehhednevnyi uchat i kontroll za sebestoimostliu produktsi#
sbornik statei. Moskva, Goafinizdat, 1962. 95 p.
(costs, Industrial) (MIRA 16:3)
KONEV, Vsevolod Dmitriyevich; RUCHIN, Serafim Fikhaylovich;
14ARGULIS, A.Sh., red.
[organization of accLunting at enterprises; practices of
the Gorki Automobile Plant) Organizatsila ucheta na pred-
priiatii; opyt Gorlkovskogo avtozavoda. Moskva, Gosfin-
izdats, 1962. 77 p. (MIRA 16ill)
(Industrial management)
MARGULIS, A~Sh prof BLESEMIKOV A.M.; WSKUTOV; F.A.; BARNGOLITSj
S.B.; UVj N.L,; KOROTKOVA, L.,, red.; MAZURKEVICH, M., red.;
LEBEDEVp A.v tekhn., red.
(Economic evaluation of the work of industrial enterprises based on
their accounting records] Ekonomichaskii analiz raboty predpriiatii;
po dannym ucheta i otchetnosti. Avtorskii kollektiv pad rukovadat-rom
A.Sh.Margulisa. Moskva, Goofinizdat. Pt.2. 1961. 315 p.
(MIRA 15:6)
(Industrial management) (Accounting)
'we prof.. prepodavatell; BARNGCL'Ts, S.B., prepodavatell;
PATIOTA, A.T., propodavatel'; SHCHFMOY, S.A., prepodavatell-,
DITACHKOT, M.P.. prepodavatell; XOMM21TWA, A., red.;
FM~1, R., red.;, LKBEM, A.. takhn.red.
[Economic analysis of the work of an enterprise; based on accounting
and reports] Ekonomichaskii analiz raboty predpriiatii; po danjvm
ucheta i otchetnosti. Avtorskii kollektiv pod rukovadstvom A*Sh.
Margulies.* Moskva. Goafinizdat. Pt.l. 1960. 470 p.
(MIRA 14:3)
1. Tuesoyuzayy zaochnvy finansovo-okonomichaskiy institut (for
Hargulis. Barngollts. Pavlova. Shchankov. DIvachkov).
(Industrial management) (Accounting)
HARGULIS, Aron Shimonovich; KOROTKOVA, L., red.; LEBMET, A., takhn.red.
(Accounting in branchea of the national economy of the U.S.S.R.]
Bukhgalter&kii uchet v otrasliakh narodnogo 1-hoziaistva SSSR.
1zd-3-. perer. Koskva. Goefinizdat, 1959. h62 p. (MIRA 13:2)
(Accounting)
,.,,1 '4-
MiGULIS,' A. -
"
Accounting in the U.S.S.R. is a function of the state administration.
Bukhg.uchet. 14 Ei.e.161 no.10:16-24 0 '57. (MIRA 10:10)
(Accounting)
Y&RGITUIS. A.
"Analysis of the economic activity of enterprises.* Bukhg.uchet
15 no-10:57-62 0 156. (MLRA 9:11)
(Accounting) (Industrial management)
IWGULIS, A. SH.
Social Sciences
Accounting in branches of the natioral econo---y of the U.S.S.R. Moskva, Gosfirdzdiat, 1951.
9. Month List of Russian Accessions, Library of Congress, November 1952. U14CLASSIFIM.
A CC- I R%-A~ff-)-d
elements is taken Into account and Mustrative exxPples cover ths:J'ase of abort circuits and of
interruptions. Orig. art. lips: 50 formulas, 5 figures, and 5 tabf-as.
SUB COLIE, 14/ ISUBM DATE- 1',Tov641 ORIG D EF: 003
L Oh411-67 ENT(1) TG
ACC NR, AT6019748 SOtftd-E-C6D-E: UIR/319276-5~7o-66-/6ii/6-i-60/021-4~
AUTHOR: Margulis, A. M.
ORG: none
TFrLL: Estimate of the reiiability of constant redundancy circuits taking into acconint thc pos-
sibffitv that PA system parani-oter maij, go beyond the limits of tolerance
SOURCE- M~adenflya naLlk LAvivskov SSR. Inotitut elettroniki I wchi.Slitel'ney tvl~hnlki.
Avtoniatlka 1 .,yc!iis-iitellnn,)titekl)nika, no. 11, 196.5, 199-214
TOPIC TAGS: systen.i rellability, reliability theory, circuit reliability
ABSTRACT: Constant redundancy represents one of the methods for Improving systew ~'eli-
ability, t1w, follurc. '-)f aTIV Of 0)(3 ete-ments,however, results in a change in the output pari-
meters. The author invezsUptca. the determination of the probability of fallur,--free operstion
of constarit redundancy sys;~VrZ4 up f) .1 specific-time.. provided the output paremeter of the
system wiJilin kbe 1J-mAfj of tolerance. The solution Is presenteu and the case of sin.6.1
toler-qnce8 in the otu-put paranitters is discussed. The spread In cs~ individuai
Card-- J 42 TJTDC: 621. 37/39. 019. 3
Simplifying the treatment of Russian leather. Leg.prom. 15 Ci-e-161
no.3:46 Kr 156. (HLRA 9:7)
1.Glavay7 i=hener Kishinevskogo koshevennogo zavada No.l.
(Kishinev--Leather industry)
'ACCESSIOU NR: AT4038174
ithe course of the tests, and after the termination of the transistor
:reliability tests. The main parameters investigated are the proba-
:bility of correct operation, the average time of correct operation,
ithe failure rate, and the probabilitydistribution of correct opera-
ition time. These parameters are defined in terms of their mathe-
imatical expectation, variance# and confidence intervals. The main
1program and the subprograms are described. orig.. art. has: 2 Eigures,
~;10 formulas, and 3 tables,
iASSOCIATION: None
i-SUBMITTED: DATE ACO: 04Jun64 ENCL: Ob
0
!SUB CODE3 IE NR REF SOV: 003 OTHER: 000
Card 2/2
ACCESSION NR.- AT4036174 S/269~/63/005/004/0225/0235
,-AUTHORS: Zhdanova, Ye. K.1 HaF%ulis.. A. M.
TITLE: Procedure for processing the results of reliability tests
on element parameters
iSOURCE.- AN LatSSR4 Institut elektroniki i vy*chislitelinoy tekhnikio
I i
Trudy*, v. 5, 1963. Avtomatika i vy*chislitel'naya*tekhnika (Auto-
;mation and computer en4ineering), no. 6, 225-235
TOPIC TAGS: statistical analysis, transistor, quality control, re- i
liability, test method
;ABSTRACT: A program is developed for processing the initial statis-,
Itical material gathered on the reliabdity of transistors by means
iof a digital computer4- The processing program is applied to infor-
mation gathered during three stages: prior to the transistor testing,
;aftei each succeeding measurement of the tiansistor parameters during,
:;Card 1/2
MARGULIS leks~annjdrr L~~~Ilvovic~hh,- GLEBOVAY R.G., red.; SHCHEDRINA, N.L.,
__ L~
tekhn. red.; VLADIMIRSKAYA, L.S., tekhn. red.
[Benefits for medical vork-ers] LIgopy moditsinskim rabotni-
kam. Moskva, Gosiurizdat, 1962 62 (MITRA 15:7)
(IEDICAL PER;ON&~*
I_- MARGULIS, A.L.
Cousultatious. Zdrav. Boo.Ireder. 4 no.1:45-" Ja '60.
(KIRA 13:5)
(HKDIGAL PERSON NIL )
I -- - HARMIS, A,Le -
Consultation. Zdrav. Roe. Feder. 3 no.11:43-45 N '59. (MIRA 13:))
(HXDIGAL PMSOBMM)
MARGULIS, A.
Consultation. Zdrav. Ros. Peder. 3 no-3:47-48 Mr 159. (HIRA 12:4)
(MBDIGAL PMONIM)
MAFGULIS. A.L.
Consultation. %drav.Ros.Feder. 2 no.11:48 N158 (MM 11:12)
(KOICAL PERSOMML)
MARGITYLIS, A.L.
~~, w ... . .~ 7,--, - - '
. .
If,
-Sdrpv,Ros,Fed, 2 no.9:0-48 5158
.~Wz Consultation. ' (mv-~ 11:10)
(HOSPI-ALS-STHY)
MARGULIS, A.K.; SUMOVICH, S.G. . -
Assembly of adtlataled -,,recast reinforced concrete frames.
Prom.stroi. 39 no.8:11,15 161. (MIRA 14-9)
1. Urallskiy gosudarstvennyy prcyokbW institut (for
Hargulis). 2. Treat Tagilstroy (for Simkhoviah).
(Framing(Building)) (Precast concrete construction)
MRGULIS, A!'K.. inzhouer.
Efficient &&gambling crane. Kokh. stroi. 14 ne.2:25-26 7 057.
(Cranes. Derricks. etc) (KrRA 10:4)
K&RGUMS, A.K.. inshener.
~-~47-':.,. -- -
I-
Construction and methods for assembling precast reinforced concrete
silos. Nov.tekhA pered.opov atroi.19 no.1;9-12 Ja '57. (HLH& 10;2)
(Silos) (Precast concrete construction)
97-57-9-5/17
Joints of Reinforced Concrete Columns with Foundations, Their
Construction and Methods of Erection.
the calculated stress in 16 hoursp and 60% in 48 hours.
The 25,* strength is the lowest for the removal of the
saddle, and the 60% strength is the lowest for loading
the'column with-additional oonstructi.onalmmbera.
Theoretical allowances for discrepancies of assembled
reinforced concrete foundations are rather rigid; for
example, A 3 fnm discrepancy is allowed from the hori-
zontal level*of the footings, and 50mm between the
centres of columns. In practice, this cannot be
achieved in assembled constructions. The method using
a saddle gives high accuracy and allows disorepanc~
in the foundations of tip to 5 mm in all directions.
The following conclusions can be drawht (1) the most
economical method of jointing the column to the foot-
Ing Is bj grouting the column into the foundation re-
cess; '(2 the conditions under f-rhich the assembly
takes place should be taken into account In ah6osing
the methods of jointing columns to foundationsl
(3) where there is any play between the base'of the
column and the base recess It is advisable to set
& centre a column by means of a saddle searred by
Card 5/5 vertical bolts to the surface of the foundation. There
_:re 3 _~Lriares an,1 1 Slavic Reference.
I..' Concrotc-`roc -A columns-Joints 2. Concrete Joints-
. . - - , - cf-01 I'/
Joints of Reinforced Concrete Columns with Foundationsg Their
Construction and Methods of Erection.
placing of a columh int-o a footing recess by a-sans of
a removable saddle. 12he author of this article used
this method'of fixing in 1954 during the construction
of a sinele-storey building for the Amurkabell Factory.
Before positi6ning, the saddle was fixed to the bottom
of the colujhn. This saddle had four legs with adjust-
able'screv7s,, and an arrangement for fixing the columnis
ax16. The free space round the column was grouted In.
FI 6 *tV a detailed illustration of the removable
sagd*leg. TehSe weight of the saddle is approximately 100
kg, and it can be used for all standard reinforced
columns, including the biggest, which are 14.55 m high
and 11 tons in weight. The saddle can be assembled In
3-4 minutes and dismantled in 2-3 minutes. The centre-
in- of one columh is done by two men In 4-5 minutesp
tD
instead of by five men taking 100-150 minutes, as pres-
cribed in the work-norms for conventional methods.
Positioning of columns with this saddle takes 0.33 men
per h6ur,'whe'r6as the ordinary method requires 8.5 man
per hour - Le. 26 times more. The strength of t4e mix
Card 4/5 for the grout used in this method should reach 25,% of
97-57-9-5/17
Joints of Reinforced Concrete Columns with Foundationsq Their
Construction and Methods of Erection.
is difficult to'check. The above-mentioned centreing
difficulties have made it necessary t6 study other
means of jointin.~ columns to footings. The method des-
cribed by L. N. 6hdhipakir. and L. M. 7,opp In Beton I
Zhele!~obeton, 1955, Nr'6 (Ref.1) simplifies grouting,
bfit centreing still gibes considerable troublev forp If
not properly carried out, it creates bending moments.
An alternative development is illustrated in Fig.3.
Here the anchoring bolts are welded on to the column,
the column rests on the top of the foundation and is
grouted into the recess. During assembly, the column
is fixed to the foundations by short anchoring bolts.
This method again presents difficulties in the exact
positioning of the column. When the Leningrad Factory
for Reinforced Concrete Products was under construction,
the columns were positloh&d by Stal'mondazh Trust No-5
by means of jacks and a euiding frame (see Fig.4). A
column was positioned into a reces6, the bottom of which
had previously been exactly marked. Four transportable
jacks, fixed to the foundation, regulated the axial
positions of the column. A guiding frame "das used to
Carcl 3/5 fix the column into the recess. Fig.5 illustrates the
97-57-9-5/17
Joints of Reinforced Concrete Columns with Foundations$ Their
Construction and Methods of Erection.
column. Fig-2 shows the second alternative, which
does not require exact positioning of foundations and
allows for correction during ereotion. The column is
positioned by angle brackets on anchor bolts, secured
above and below the bracket by nuts. Rectification of
the position of the column can be made by adjusting
the top and bottom nuts. The shortcomings of this al-
ternative are the narrow allowances in positioning of
the anchoring boards, the exactness required in position-
ing the foundations and, finally, the difficulty of
producing columns with steel base details amounting to
300 kg per column. The method of setting and grouting
a column into a concrete base with the required base
recess is very simple, but requires the addition of
further steel details, dnd a high degree of precision
when the column is cast. The'centreing of the column
in the recess in two directions is very troublesome,
and'requires frequent repetition of centreing and check-
ing. Further, it is very difficult to concrete the
bottom of the recess when the column is centred, and
Card 2/5 the appropriate tamping of the concrete under the column
97-57-9-5/17
AUTHOR: Margulis, K (Engineer).
TITLE: Joints of Reinforced Concrete Columns with Foundations,
Their Construction P Iand Methods of Erect.ion. (Konstruk-
tsil, styka zhelezobetonnykh kolonn s joundamentami i
sposoby ustanovki kolonn)..
PMIODICAL: Beton I Zhelezobetont 1957.,, Nr.9. pp. 355-359. (USSR).
ABSTRACT: Two known constructibnAl methods of joining columns to
footings are described. The first method consists of a
steel grill foundation and holding-down bolts; the
second is a method whereby the fcot of the column rests
on the top of the foundation, and is anchored to it by
holding~-down bolts. The Kiev Proyektsallkonstruldaiya
I -developed a number of variations of the second
have 'L
method.' The variant shown in Fig.1 has two gusset
plates welded'to the ends of t-he main reinforcement
of the column# These plates should be strictly verti-
cal and of the same length. They rest on rolled steel
joists concreted into foundations, and are held down
by anchoring boards through angles welded to the gusset
plates. This first alternative is rather laborious and
requires approximately 150 - 400 kg of steel, vihich
Card 1/5 equals the whole weight of the reinforcement of the
MARGULIS, A. I.J* inzh.
Calculating bolted group joints. VGst. mashlnoetr~~ 42 n0.12:
25-28 D ;62. (KMA .16 ~- 1)
(Fastenings)
~/122/6o/0oq/0o,3/tO5/'015
Stresses in the conjuction ... A16i/Ai3o
the data that the cylinder shape with. conjunction r4dius can be presented by a
generalized dimensionless h factor having a clear correlation with the ce-
R2-
mean
factor. The values of this dimensionless general parameter and corresponding d-
are:
R 2 0.250 0.125 0.090- 0.050 O.o45 0.018 0.010 0.005 0.002
mean
r,-\-- 0.70 1.02 1.17, 1.57 1.65 1.16 ?.65 3.31 A-5
There are 6 figures and 1 table.
Fig. 1:
Card 3/3
255 2 43 15
a, "C' T !l ~1
oarri6d ~u+, c,' cnly
and thr,,iH :i i Ir aii.
Mcde'- w;~r,~ fz-,rr 'F- TR
3 ?,ro~ s a e :- vir, re ~)ca~r n F. -1 -A z 01 t. T- -I I - a,
a:-- r.,)- Y -,,r It. e c.,,- P-u r. one
d eta 1.1 15 a F: ~ 1-:2 le ti a v 7, r ~s ompennat-
n all 1'.) F-tli 1,-,k at freez-
Ing. wPl-~ i*IrA low-
.rl-;-.g In tr,,~ f f~ z i n, !7 a e
0 max 'tree!iG~ in -'r, r ~i D,,. tne lnn,~,r
SUrface, calcuia-~ed -,;sjriF, ;,y3.rn,~ T.,;tnodl '-n t~-.e cf 'nay f arjt~,r, where
R + r p
1. !n
and p Is the g,--.,ps n of
independent varia-!:)Ies and But 11'. V-ir-;~,d tr. f--:r1.htr analyiis of
mean
Card 2/.3
Al
2 5243
7.;
n,~ e r n s
pr r,e.
PERIODICAL: r-, -q a
:'EXT -3 0 7.
F;,
Val
Li
;art I
GONCHAROV, S.P.; KITSENKO. V.V.-, HARGULIS, A. I.: CHEMAVSKIY, L.G.:
;qw--
RZ&VSKIT, B.A., kandidat te~S~i'AAIMh nauk, redak-tor; IMMUS,
M. Te., inzhener, rodaktor; MATVFYEVA, Ta.M., tekhnichaskiy
radaktor; SOKOWVA, T.F., tekhnichaski7 redaktor.
Neasurements of atrains and stresses; handbook] lzmerenia
napriazhanii i usilii; spravochnoe posobie. Hosk7a, Goa. nauchno-
tekhn.izd-vo mashinostroit. lit-r7, 1955. 66 D-- (MLRA 8:9)
(Strains and stresses)
1A WTUMS 03 RI) YAt o m i can6 bfblec~L~ Physics - Physics of the Atom D-1
Abs Jour Ref Zhur - Fizika, No 1, 1958, 661
Author lkrgulis, A.D.
Inst
Title Level Shift of Atomic Electrons.
Orig Pub Uch. zap. Mordovsk. ped. in-ta, 1956, vYP. 3, 47-67
Abstract Survey.
Card 1/1
MARGULIS, A.
Po"fits for rural medical personnel. Swr. profsoiuzy 20
no,3:42-44 F 164. (MIRA 17:3)
1. Nachallnik otdela Ministerstva zdravookhraneniya SSSR.
IIARGULIES, Zygfryd, mgr inz.
- - --- - .. -, -.. ,----- --
Application of mathematical machines in the chemical industry.
Chemik 16 no.11:332-336 N 163.
MARGULIFS, Z~rgfryd, mgr inz.
Development trends of the petrochemical industry in the United
States and Western Europe. Chemik 15 no.6;192-194 Je '62.
1. Prosynchem, Gliwice.
IV,.RGULIE,S, Z.
"PrepL,raetion of Phthalic Anhydride" p. 505P (PT,)-Z:]?,ff3L Vol. lo,
No. 10, Oct. 1954, Warszawa, Pohnd5
SO: Monthly List of East European Accessions, (I-EAL), LC, Vol. 1,, No. 5,
MP-Y 1955, Uncl.
SOV/32-29-4-22/71
The OscillograDhic Testing Method for Magnetic-soft Materials
2 of which are Soviet.
ASSOCIATION: Moskovskiy energetioheSj,.jiy 4nStitUt (Moscow Power Engineering
Institute)
C~-~rd 5/3
SOV/32-25-4-22/71
The Oscillographic Testing Method for Magneti~-soft Materials
value of the induction and of the voltage of the field (which
corresDonds to the obtained loop curve) is computed. Tests
were carried out for determining the measuring errors at
toroidal samples of the steels E 31 and E 42 at inductions of
1000 to 116000 gauss and frequencies of 50 cycles per second.
The measurements were made at a ferrograph (manufactured in
the MEI) (Ref 2) as well as at a circuit diagram ferrograph-
ferrometer-wattmeter (consisting of the oscillograph E04)
(Fig 2). It is pointed out that the frequency error and also
the relative variation of the initial phases of the 1, 3 and
5 harmonics play an important part. The dynamic loop curve
(from the ferrograph) and points of the loop (from the ferro-
meter) for a steel sample E 31 at 14600 gauss and
R - 100 (Fig 3), as well as some test results (Table) are
x
c
given. The principal error in determining the losses at the
ferrograph as well as at the ferrometer is made in plotting
the dynamic loop and in establishing the loop area with the
Card 2/3 planimeter. There are 3 figures, 1 table, and 3 references,
25(6) SOV/32-25-4-22/71
AUTHORS: Kifer, I. I., Marguleva, V. U.
TITLE: 4
The Osc-.' ilographic Testing Method for Magnetic-soft llatr,-rriala
(Ob ostsillograficheskom metode ispytaniy magnitna-myagkikh
materiair,,,)'
PERIODICAL: Za-,odskaya Laboratoriya, 1959, Vol 25, Nr 4, pp 434-437 (USSR)
A3STRACT: Tille oscillographic method of testing ferromagnetic materials
(w-_'th a ferrograph) is not satisfactory; therefore it is re-
commended (Ref 1) to use the ferrograph not for measurements
but only for obser-ring the behavior of the samples. In the
present case the calibration of the oscillograph which was
necessary after every determination is eliminated, and the
conditions for increasing the measuring accuracy of the ferro-
graph are established. The former can be reached by using a
circuit diagram (Fig 1) which - simultaneously with recording
the loop curve - permits the measurement of the mean value of
and
at the measuring winding of the sample w.
the tension E
av
the amplitude of the voltage drop at the test resistance R.
) which is connected in series with the magnetizing
(device V
a
Card 1/3 , the maximum
and V
tes-. winding w
. After the values E
a
av
l
14ARGULE-SCU G,
i4, I ~~ ~, -, -
Separation of
2 in V in the
163. 4
1. Coniunicare
spin states of particles with maxim= spin
approximation hL4 ~ 0. Comunicarile AR 13 no.10:851-856
prezentata de academician G. Vranceanu.
-MARGYJIMCU, D., candidat in stiinte economice
"Profitableness and its patIs of prosperity in industrial
enterprises" by I. Iticovici. RqVieved by D. Margulesou.
Probleme econ 15 no.7:137-140 J1 162.
MARGUIES, E.I.
-- `.- rest. Ilzahinostroitall no.5:32 My 163.
(MIRA 16:7)
(Lathoo)
MARGULES, A.U.
T/rood p re o s in g s hop. h in r~z~, t rri -;' tI n o . L .1 ~2 164 1,!,,'.--,-' 17:7)
MARGULES, A.U.
Multiple machining of bearing caps on a drilling machine.
Mashinostroitell no. 505 Yq 164. (HM 17:7)
MARGULES, A. U.
---1----;.-.- ........ 1:11- .-, --.
Parts made of wood particles. Mashinostroitell no-11:30 N 163.
(MIM 16: 11)
HARGULESp A.U., inzh.
Mechanization of repair work. Mekh. i avtom. proizv. 17
no.8:28-30 Ag 163. (MIRA 16:10)
MARGULES, A.U.
Unit for separating shot from sand and dlast. Yashinostroitell
no.7:24 Jl 160. (MIRA 13:7
(Shot peening)
KkRGULES, A.U., inzh. VOLOVICH, B.M., inzh.
Modernization of equipment for reconditioning molding materials.
Mashinoatroitall no.1:9-10 Ja 160. (141RA 13:4)
(Molding mach i no a-Techno logical innovations)
HARGULES. Anton Urenovich;_YOIDVICH, Bentsion Kendelevioh; PMIIKO. T.D..
W6_e_nz"en_t_;A_jR_X__R_, P,Ya., red,
(Modernizing the equip=ent of a foundry shop; factory practicel
ModernizatBiia oborudovaniia liteinogo teekha; opyt zavoda.
Moskva, Gos.nauchno-tekha.izd-vo mashinostroit.lit-ry, 1960.
6o p. (MMAI 13:12)
(Foundries--Equipment and supplies)
25(2) SOV/117-59-4-22/36
AUTHOR. Margules, A.U., _ E'ngineer
TITLE. An Improved Brake for the Load Liftin;, Mlechanism of
Electric Tackles
P 37 (USSR)
PERIODIC,~L: Mashinostroitel5, 1959, Nr 4-
ABSTRACT: The short note describes and illustrates a char,.e in
the design of electric "TB-1" and "TB-2" tackles
produced by the Moskovskiy zavod "Krasnyy metallist"
(Moscow Plant "Krasnyy 11iletallist'.), which was carried
out at the Luganskiy teplovozostroitel"ny-y zavod
im. Oktyabr,skoy revolyi-itsi4. (Lugansk Diesel Locomo-
tive Plant imeni October Revolution) on the suggestion
of locksmith V.G. Gayvoronskiy of the plant's steel
foundry. The brake of the altered design works better.,
There is I diagram,
C-rd 1/1
The Improvement of Molding Machines SOV/1~17-59-2-22/27
the casting from the mold were comDlex and short-
lived. The new pneumatic vibrator (F-l'i'aire 2),
put into service in mclding machines. proved to be
much better and niore durable, Tl-iere are 2 dia,=ams.
Card 2/2
18( 7) SOV/1 1, ;?/27
AUTHORS: Margules,_A U., and Volovich, B.11J., Engineers
TITLE: The Improvement of Molding Machines (Usovershen-
stvovaniye formovochnykh mashin)
PERIODICAL: 1dashinostroitell, 1959, Nr 2, pp 39--40 (USSR)
ABSTRACT: In this article, the authors briefly describe two
-he Luzanskiy teplovozo-
innovations introduced in 41 0
stroitellnyy zavod (Lu-ansk Diesel Locomotive Plant).
1) The installation of an additional cylinder in
the reserve-throw mechanism of molding machines,
used for shake-up and separation of the mold from
the castina. The use of only one cylinder proved
insufficient and called for the manual help of
several workers. The installation of the second
cylinder was su gested by V.G. Gayvoronskiy and B,
11. Volovich. 2~ A new pneumatic vibrator suggest-
ed by V.G,. Gayvoronskiy. The ordinarY vibrators
used in horizontal moldin-, machines for separating
Card 1/2
The Improvement of the Drive of Punching Frames SC)V/117-58-11-4/36
the drive is a rubber-fabric hose with an outer diameter of
105 and an inner diameter of 65 mm. The roller supports are
protected by casings with felt packings (Fig. 3). There
are 3 diagrams.
1. Foundries--Equipment 2. Steel castings--Cleaning "~. Tndust-~--_~al
equipment--Performance
Card 2/2
SOV/117-59-11-4/36
AUTTIORS: Margules A U Volovich, B.M., Engineers
TITLE: The Improvement of the Drive of Punching Frames (Usovershen-
stvovaniye privoda vybivnykh reshetok)
PERIODICAL: Mashinostroitell, 1958, Nr 11, pp 6 - 7 (USSR)
ABSTRACT: In the shaped steel casting workshop of the Luganskiy teplo-
vozostroitellnyy zavod (Lugansk Diesel Locomotive Plant),
the forms are punched by using mechanical punching frames
driven by electromotors. The lifting capacity of the frames
is 5,000 kg, the power 14 kw. The mobila frame (Fig. 1) is
placed on 24 spiral springs and is put iilo vibrating move-
ment. The mold is placed by a crane on 1he frame, and is
destroyed by the vibrations. The V-shapid drive belt is
stretched under the influence of the chan;ing stresses. The
roller supports are insufficiently protec;ed against dust.
Fedotov, Volovich, and Koritskiy proposed replacing the
Card 112 V-belt drive by a reducer (Fig. 2). The flexible link of
building-lip of W o r n I I a r t s- o f 1, o a d -11 cr, V 7 - 1 C - 2 1 / -2; r
The vertically mov,_ng part of the boom is repaired by a
method sugge-sted by the foundry's mechanic, B.M. Volovich,
and repairman, A.Y.. DragunDV (fig. 2). The driving gear
of the swivel mechanism of the bridge charging crane is
built up to an additicnal life of 2 years There are 3
diagrams,
2. Weldtig-.-Applications
Card 2/2
The Modernization of Crane Equipment
separate gear (Figure 6 and 7). The magnetic mold-type crane
has also been modernized by replacing the hand-controlled
mechanism of the grab bucket by a special electric cogged-
gear drive (Figure 81. This had been suggested by A.N. Dra-
gunov, B.M. Volovich and A.Ye. Voloshin. The turning me-
chanism of the bridge crane has been modernized by improving
the construction of the lower bush (Figure 9). There are 9
figures.
AVAILABLE: Library of Congress
Card 212 1. Cranes 2. Crane equipmc t,41odernization
-21/35
'17-56- 0
clov-1ch, (V o 3 S
I - yacilines
U C" d ,,,,tin., . 1,, 11 mashinj
a r p,rt5 of Loa - a, y9mny
Of WOrn taley 9T"Zopo
-tlui laing znosIlennY?,h de (USS
TITLE' tanovieniYe -2 7 IOVOZO-
't-l ~ 1958, 1'r 10, pv all~-'J tep
Mash4 nos r the yutsii
.,I foundry of ya
re'70-0,,tyabr' 9ya
P Ste brls"y arts
tilra 0d imeni ()~Itya I ,Norn P
fA-v . ion planT, uilding '-P 1.1i
nyy r,13, - *L'rmall I
cds in I -
ABSTRACT: stroitO.1 tj'~J(' o no ~pa~ t ,LDport
-Diesel 1,0c'_ .),,n c) various me Vitter and re worn-011
itsiya' USP-5 _h, ne, for steel 45
is of
Revolyl C, )"is-~ing M~' Ided '3tr")
of 10a - ,sted. a vie I str'P f these
-4 WeldecL The lif e 0 rims and
IaLye The hamme The
'Yerom (f. a f te rward s when each
,.1jers LTed ~f ,,, ones. j
is a! Y 'r"-- that u eas'. diameter.
4. t _e I . d more
and r rPDa3.re espect to
I.ers -- be . r
b,_1 I r T" e Th e 6 Is c an rd ized WIT11
trao of are stand~L
card 1/2 grou 0
117-58-06-4/36
AUTHORSi Margules, A.U. and Volovich, B.M., Engineers
TITLEs The Modernization of Crane Equipment (Modernizatsiya krano-
vogo oborudovaniya)
PERIODICALs Mashinostroitell, 1958, Nr 6, pp 9-11 (USSR)
ABSTRACT: In the shaped-steel casting workshop of the Luganskiy teplo-
vozostroitellnyy zavod imeni Oktyabrskaya Revolyutsiya
(Lugansk Diesel Locomotive Plant imeni Oktyabrakaya Revol-
yutsiya), the equipment of cranes has been modernized. The
replacement of worm gears by cogged gears as suggested by
A.Ye. Voloshin increased the efficiency factor of the lifting
mechanism and the movement of the crane car by 4VI- to 9VA.
The diagrams of these mechanisms are represented in figure
1-2. The open cogged gears were replaced by closed cylindri-
cal reductors (Figure 3) to prevent sand, mud, etc. from
getting into the gear. The reductor drive has been modernized
by replacing the vertical reductor by a horizontal one
(Figure 5) as proposed by B.M. Volovich and A.Ye. Volohsin.
The lifting mechanism and the mechanism which closes the grab
Card 112 bucket have been separated by a separate ele'ctromotor and
Y K
AUTHCR: LarCules, 1.2 1-., - 2 E/
TITLE: Ceramic CututinF, Tools (h.ineralokeramicheski.ve -strwnnenty)
FEMODICAL: Stanki i Irstriiment, 1958, ilo.4, pp. 39 40 (USSR)
ABSTRACT: The SeoL,.etr.-; jf ceramic tjol ti,-,s, tf.eir fixino
Q
U
to the tool-holder ly bonding, or clampinC,, cuttinG speeds and
feeds as I)ractised at t1ie voroshilovCrad Diesel Locomotive
Plant (VoroshilovC.,,radskiy teplovozostroitel'nyy zavod) imeni
Oktyabrlskoy Revolyutsiy are illustrated and stated. The
cutting of components r,'ith a Rockwell C hardnesS of 46 is
carried out wIth a, 0.5 = do,pth of cut. A built-uD milling
cutter for cast iron is sl,=n. Tool bits cast-in into an
aluminium tool-holder achieve cuttinG specds of 1 000 m/min.
There are 6 fiGures.
AVAILABLE: j.ibrary of Cor-L_-ress
Card 1/1 1. Cutting tools-Ceramics
,1,-
, j (~ ", : I )- I -Ili
. -1 1 1 1". J.
1
IMMUMS, A.U.
Reconditioning spindle bevel holes in heavy milling m hines. Stan.
i instr. 28 no-5:38 MY 157e (MI-RA 10:6)
(9~indles (Machine tools))
66
AUTHOR: -Margules, A. U.
TITLE: The Repair of -bi~-iftling, Boring and Milling Machine
Spindles (Restavratsiya Shpindeley Sverlillnykh,
Rastochnykh I Frezernykh Stankov.).
PERIODICAL: Stanki I Instrument, 1957, No.l. P. 39. (U.S.S.R.).
ABSTRACT: The article describes the replacement of worn Morse
cone ends in tool spindles by means of butt welding
and subsequent machining.
ASSOCIATION:
PRESENTED BY:
SUBMITTED:
AVAILABLE: Library of Congress
Subject
Card 1/1
Author
Title
USSR/Engineering
Pub. 103 - 17/22
V1argules,,,'A,,,...,
Bimetallic worm gears, their production
Stan. i instr., 4, 42, Ap 1956
AID P - 5o46
Periodical :
Abstract :
A concise description of the process of making certain
bimetallic worm gears (used in traveling crane3 and in
metal-cutting machines), devised by Engineer Bershitskiy,
M. M. and used at the Voroshilovgrad Locomotive Works
im. October Revolution. Three drawings.
Institution : As above
Submitted : No date
RARGULANI. A. Kh.
"Kazakh skaya yurta j ~,- "
.., j.
report submitted for 7th Intl Cong, Anthropological & Ethnologic-ai Scien,!es,
Moscow, 3-10 Aug 64.
Now mterials on Chokcan Valikhanov. rest. AN Kazakh. SSR 13 no.12:
34-193 D 157. (IfIR-A 11:1)
1. Chlon-korrespondent AN TazSSR.
(Valikhanov, Chokan Ghingi~ovich. 1837-1865)
MARGULAN, Aelihe - _
-1- -
The most important memorials of the ~rouze Age in central
Kazakhstan. Vest.All Kazakh.SSR 12 no-3:18-33 Hr 156.
WR& 9-7)
l.Ohlon-korrespondent AN KazSER.
(razakhatan-Brouze Age)
-W&-of-Pelflcules, 10 ctu. >~ ;6' cti. of"'000-fj 11foid G5
cmulsion was exposed to the Berkeley i- bearn-.. 80 platcs
were seexched to detect deciys of Me A@ 'hyperon. Pr4&- 3d
tonte demys (22) of the Z + hi aficst bive been found;
2-prong stars are aZ.M".o,9ood exxtriples of-&*4ty--.
peron decay. 'The. qdafitles of the cmulsil&i are analyzed
froul the data. A total of 68 2-prong starg are tentatively,
(dentified as M --p +,,c- decays. A lifstogram shows
the distributtm-d! the ()Lvuluea ks caled. for these stars,
T, As Itypem Is -1114.42 :ii O-W m.e.v.
~11,e mass of the
IP - 2=mufm tltunhdmo~=
MARGROT, T.
Cytological findings during the healing of the inuured rat auricle.
P. 98, (Caskoslovenska Biologic) Vol. 6, no. 2, Mar. 1957, Praha, Czechoslovakia
SO: Monthly Index of East European Acessions (EEA1) Vol. 6, No. 11 November 1957
FEMOVCICP F.; MARGRSIMER,ji,
lk~
Exposure to ionizing radiations of the population of Croatia caused
by medical roentgenographic examinations. Arh hig rada 12 no.1:45-52
160.
1. !Pea bolnica. "Dr. M. StoJanovic" i Gentralni higiJenski zavod,
Zagreb.
(RADIOGRAPH
Printer-friendly version