CABLE TO RUCSC/SAC OFFUTT AFB OMAHA NEB FROM NPIC WASHDC

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A001000040101-5
• Release Decision: RIFPUB
• Original Classification: S
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: February 27, 2007
• Sequence Number: 101
• Publication Date: November 19, 1965
• Content Type: CABLE

Approved For Release 2007/03/01: CIA-,RDP78B04558A001000040101-5
P 192
FM NPI? ASH1DG 1,65 NOV 19 37 Z
TO RUCSC/SAC O :
UTT AFB OMAHA NEB
RUCVAA/4 080 wt3 OL 19 BARKSDALE AFB LA
RUCVAA/2D RT ,
S B
ALE AFB LA
RUEKDA/DIA WASHDC
RUECYH/NAVRECONTECHSUPPCEN SUITLAND"`D
RUEPIA/CIA WASHDC
RUWBKN/15TH AF MARCH AFB RIVERSIDE CALIF
RUWGAA/2 AF BARKSDALE AFB LA
BT
S E C R E T CITE NPIC 5957.
SECRET
OUT57222
22 N
DISTRIBUTION
Cy No. Office
Ue
ADMIN
SEC BR
P&DS
CSD
1PD
PD
15TH AF (FOR DI) q SAC (FOR DIM/GOLDEN TREE/DOCR, DM 4) 2D AF (FC~R-qY~--Ps~
PSD?ICB
~ TID
1. CAMERA B 7 WAS USED IN MISSION 8056 FLOWN ON 16 NOVEMBER _
1AD
1965. PROCESSING WAS ACCOMPLISHED BY NAV RECON TECH SUPPPCEN. I-
2. ORIGINAL NEGATIVE:
SPAD I
A. THE EXPOSURE WAS ADEQUATE AND THE RESOLUTION IS GOOD NSA-LO
1 DIA-AP.
EXCEPT WHERE DEGRADED BY SMEAR POSSIBLY CAUSED BY VIBRATIONS
IN THE CAMERA.
B. 9R SIDE: TWO ROLLS OF MINUS DENSITY DOTS, LOCATED
0.6" FROM THE INBOARD EDGE, 2.5" FROM THE OUTBOARD EDGE, AND
1.6" APART, OCCUR THROUGHOUT THE MISSION. AN EMERGENCY CUT
WAS MADE ACROSS FRAME 1322 DURING PROCESSING. THE CUT WAS
REPAIRED WITH CLEAR MYLAR TAPE AND A HEAT SPLICE. MANY PLUS
AND MINUS DENSITY STREAKS PARALLEL TO THE MAJOR AXIS, ARE
PRESENT FROM FRAME 1322 TO THE END OF THE MISSION. WAVERING,
IRREGULAR PLUS DENSITY STREAKS OCCUR ON EVERY FRAME BETWEEN
1399 AND 2413. HEAT SPLICES ARE LOCATED BETWEEN FRAMES 496/
497 AND THROUGH FRAME 1182. MANUFACTURING SPLICES ARE PRESENT
ON FRAMES 1041 AND 1660.
ATd m copy
SanItIzed
1
! _~_ PAG
DIAXX-4
 Approved For Release 2007/03/01: CIA-RDP78B04558A001000040101-5
C. 9L SIDE: WAVERING PLUS DENSITY STREAKS OCCUR INTER-
MITTENTLY NEAR THE INBOARD EDGE DURING THE FIRST 500 FRAMES
AND FROM FRAME 1086 TO 1101. NUMEROUS PLUS AND MINUS DENSITY
STREAKS PARALLEL TO THE MAJOR AXIS OCCUR INTERMITTENTLY THROUGH-
OUT THE MISSION. AN AREA OF FOG LOCATED NEAR THE OUTBOARD
EDGE AND IN THE TAKE-UP CORNER OF THE FRAME IS PRESENT ON FRAMES
1209 249 AND 341. HEAT SPLICES ARE LOCATED THROUGH FRAME
1083 AND BETWEEN FRAMES 1122/1123. A MANUFACTURING SPLICE
IS PRESENT ON FRAME 560.
D. BOTH SIDES: EDGE FOG IS PRESENT ALONG BOTH EDGES.
ROLLER CHATTER OCCURS ALONG BOTH EDGES BUT IS MINOR AND INTER-
MITTENT ON THE OUTBOARD EDGE. A FEW PINHOLES AND EMULSION
BLISTERS ARE NOTED DURING THE MISSION. THE LAST TITLED FRAME
IS 2507.
E. THERE ARE NO MAJOR CAMERA OR PROCESSING MALFUNCTIONS
EXCEPT AS NOTED ON THE 9R SIDE.
3. POSITIVE:
A. THE PI SUITABILITY IS GOOD WHERE NOT DEGRADED BY
SMEAR. THE PI'S SPECIFICALLY MENTIONED THE PRESENCE OF SMEAR
IN THE 1R POSITION.
B. THE PRINTING AND PROCESSING WAS GOOD.
C. CLOUDS OBSCURED OR DEGRADED APPROXIMATELY 25 PERCENT
OF THE MISSION.
S E C R E T
1