SOVIET HANDBOOK OF STATE STANDARDS AND TECHNICAL SPECIFICATIONS FOR FERROUS METALS

• Document Type: CREST
• Collection: General CIA Records
• Document Number (FOIA) /ESDN (CREST): CIA-RDP81-01043R004000170006-9
• Release Decision: RIPPUB
• Original Classification: U
• Document Page Count: 319
• Document Creation Date: December 23, 2016
• Document Release Date: March 20, 2014
• Sequence Number: 6
• Publication Date: November 15, 1959
• Content Type: REPORT

Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
.;
- zA? ? -.
k UNCLASSIFIED
CLASSIFICATION
w- .,
(Leave blank) STA
STAT
'AIR INTELLIGENCE INFORMATION REPORT
COUNTRY OR AREA REPORT CONCERNS
USSR
DATE OF INFORMATION
1957
DATE OF REPORT
15 Nov 1959
SUBJECT (Descriptive title. Use individual reports for separate subjects) r
(U) Soviet Handbook of State Standards and Technical Specifications for Ferrous
Metal,,
SUMMARY (Give summary which highlights the salient factors of narrative
unless report can be fully stated on AF Form 112. List inclosures.
This handbook lists the Soviet state standards
(GOST)J for ferrous metals. In addition, there
designations of various metals and locations
ducing metals in the USSR.
report. Begin narrative text on AF'Ferm 112a
including number of copies)
_
and technical specifications
is information on factory code
and designations of factories pro?
STAT
STAT
STA
7-4.7b5.
i
1
WARNING: This document contains information affecting the national defense of the United States within the meaning of the
1
Espionage Lams. Title 18, U.S.c., Section 793 and 794. Its transmission or the revelation of its contents in any manner to
an unauthorized person is prohibited by law. 1
i
4'
STAT
1
AF FORM 112 REPLACES AF FORM 112. 1 OCT 52. WHICH MAY BE USED
15 SEP 54
CLASSIFICATION
* U.S. GOVERNMENT PRINTING OFFICE : 1954 0 ? 315475
0441,01
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
IMITTMrijarnrrMr-lifized Copy Approved for Release @ 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Ite
AFIE01011.1112,-PARrH
i? ? iiii.RovEb
UNCLASSIFIED
COLAssIPICKnotO
AIR 'INTELLIGENCE INFORMATION REPORT
-
STAT
PAGE
OF 35 PAGES
The handbook:which is forwarded is entitled "Handbook of State Standards and
Technical Specifications for Ferrous Metals". The Preface, Table of Contents and
selected parts of this Appendix have been translated and follow. Certain sections,
are applicable to air requirements.
1. PREFACE:
This handbook of ferrous metals is intended for aiding in the correct selection;
and ordering of ferrous metals by builders, technologists, economists and supply
specialists.
The handbook should not serve as a basis for solving arbitrary controversy ,
over the 'use and acceptance of the product, nor for deciding the quality of products
which are to be used. This should be done on the basis of current Standards and
Technical Specifications.
The' reference book contains data on the assortment of most common profiles of
ferioussmet41s, and brief basic requirements of technical specifications in the pro-
duction 'and:stocking'of steel (chemical composition, mechanical characteristics,of
external appearance, marking and packing) as listed in Standards and Technical
Specifications up to 1 October 1956.
The handbook lists only the types, profiles and brands of steel most widely usedj
such as general purpose steel, and such special purpose steel as is most in demand.
The handbook does not give the types4 profiles and brands of steel which have
an extremely narrow field of use, such as for agricultural machine building, trans-
port machinery building, the electrical industry, etc.; likewise, data on steels
for metallurgical reduction (billets, rolling metal, strips for 3ipe, pipe for draw-
ing and cylinders, etc.) is not incluid here.
This book lists the profiles, dimensions and brands of steel which are specified
as certified up to 1 October 1956 in Standards and Technical Specifications.
Those profiles or dimensions of products which have not yet been put under pro-
duction in metallurgical factories by the above date are listed separately in the
handbook.
2. TABLE OF CONTENTS:
PART ONE. PIG MON AND FERROALLOYS
1. General instructions 13
2. Foundry pig iron 15
Pig iron, foundry, coke (State Standard 4832-49) 15
Pig iron, foundry, charcoal (State Standard 4833-49) 16
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND 32. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART, BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE. USAF.
UNCLASSIFIED
(CLASSIFICATION)
26_8657o-I * D. it.4ernitimpri MMUS OrtIVI
44.
3%.
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
vis ..1c=
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Ar. FORM 112,-PART
APPROVED I JUNE 1941
UNCLASSIFIED
-
(CLASSIFIC.ATIO10
AIR INTELLIGENCE INFORMATION REPORT
3 35
PAGE OF PAGES
,
Pig iron, foundry, chrome-nickel, coke, naturally alloyed (Ferrous Metals
Technical Specifications 5003-55) 16
Pig iron, foundry, chrome-nickel, coke, naturally alloyed type (Ferrous
Metals Technical Specification 3432-53)
17.
Pig iron, foundry, chrome-nickel, charcoal from Eastern Kimpersaysk ores
(Ferrous Metals Technical Specification 3431-53) ..18
Pig iron, foundry, special (State Standard 4834-49) 18
Pig iron, roller, charcoal (Technical Specification 634 19
3. Foundry pig iron for steel manufacture 20
Pig iron, steel-manufacturing, coke (State Standard 805-49)
Pig iron, steel-manufacturing, charcoal (State Standard 48-31-49)
20
22
4. Blast furnace ferroalloys 23
Pig iron, specular (State Standard 5164-49 23
Ferrosilicon, blast furnace (State Standard 5163-49)
23
Ferromanganese, blast furnace (State Standard 5165-49) . 23
Ferrophosphorous, blast furnace (Ferrous Metals Technical Specifications
3074-52) 23
Ferromanganate -phosphrous, blast furnace (Ferrous Metals Technical
Specifications 3135-52) 23
5. General Requirenents of Technical Specifications for pig iron and blast
furnace ferroalloys 24
6. Ferroalloys, electrothermical, metalthmnic and alloying metals 26
7. General requirementscf technical specifications for electrothermic and
metalthermic ferroalloys and alloying metals .26
Classification and chenical composition 27
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND 32, AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART, BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCIASSIFIED
0:Lmsuluxmr0
- ?
16-66570-I . COO'llit/1111047 Pft11171N1 411/PICt
Declassified in Part - Sanitized Copy Approved for Release @ 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
.01014 112440ART. ii
APPROVED' I'JUNE
immAwinib
(ClAssmATIoN)
AIR INTELLIGENCE INFORMATION REPORT
PAGE
op 35 PAGES
STAT
PART O. ORDINARY QUALM AND QUALITY
STEEL
I. Grading of Ordinary Quality and Quality Steel
A. Profile/Structural Steel
1.
Round steel
40
Steel, round (State Standard 2590-51), ordinary quality and quality
40
Steel, round, spring-coil (State Standard 7419-55)
42
Steel, round, tool (State Standard 1133-41)
'
42
Steel, round, tool, high-speed (State Standard 5650-51)
43
Steel, round, for file manufacture (State Standard 5210-50) '
44
Steel, round, for permanent magnets (State Standard 6862-54)
44
2. Square Steel 145
Steel, square, spring-coil (State Standard 7419-55) 46
Steel, square, (State Standard 2591-51), ordinary quality and qua1ii,y 45
Steel, square, tool (State Standard 1133-41) 46
Steel, square, tool, high-speed (State Standard 5650-51) 48
Steel, square, for file manufacture (State Standard 5210-50) .49
Steel, square, for permanent magnets (State Standard 6862-54) 49
Blank/billet, square (State Standard 4693-51), ordinary quality and
quality 49
Bar/pig, pressed (State Standard 4692-49), ordinary quality and quality 50
3. Bar Steel 52
Steel, bar (State Standard 103-51), ordinary quality and quality 52
Steel: bar, spring-coil (State Standard 7419-55) 54
Steel, bar, tool (State Standard 4405-48) 55
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND 32. AS AMENDED. as TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES, EXCEPT BY PERMISSION oF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCL4SSIFIED
(CLASSIFICATION)
18-55570-1 * U. Lsernmona ',germ's iwncr
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
I
47,
?
AFFORMA12--*ARTH
APPROVED 1 JUNE 19411
?:117.611
UNCLASSIFIED
(CLASSIFICATION)
AIR INTELLIGENCE INFORMATION REPORT
STAT
PAGE
5
OF 35 PAGES
0 I'
Steel;? bdr., 'foe rile. tabitfectute.. (State ? Staildb.ed '521.0-50 ' ' ' ? "
.-1?M
Steel, bar, for permanent magneta (State Standard 6862-54) 58
Steel, bar, for nut manufacture, (State Standard 6422-52), ordinary
quality and quality 58
4. Hot-rolled band,steel 59
Band, steel, hot-rolled (State Standard 6009-51), ordinary quality 59
5. Hexahedral/cubic steel 60
4tee1l hexahedral (State Standard 2879-51), quality
6. Angle steel ,.61
Steel, angle, equilateral (All-union Standard 10014-39), ordinary
quality and quality 62
Steel, angle,.unequilateral (A11-,union Standard 10015-39), ordinary
quality and quality .. .63
7. Profile/structural steel for shipbuilding (State Standard 5521-50).......64
60
B. Girders, Channels, Rails and Grooved
Steel
1. Girders, I-beam 65
Girders, I-beam (All union Standard 10016-39), of ordinary quality..
and quality steel 65
Girders, I-beam, light:-duty type .(Ferrous Metals Technical Specifica-
tion 2957-56), made of ordinary quality steel .66
2. Channels 69
Channels (All union-Standard 10017-39), of ordinary quality and
quality steel .69
Channels for rolling stock manufacture, made of ordinary quality
steel (State Standard 5267-50) 70
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 U. S. C.-
31 AND 32. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCLASSIFIED,
(CLASSIFICATION)
26-56,570-1 * V. V. 5oVIVIIVItN7 P51111/15 MICE
SI
1.;
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
?7,
4.. P.
0400440all
APPROVED 1;11.1NE ism
Fa
UbMASSIFIIEDil
4CLAXNWAW060
AIR INTELLIGENCE INFORMATION REPORT
PAGE
OF 35% MWM
t. A, a. ****** ** . ** **** ** 1, , . .
Channels for .shipbuilding (Stat6 Staiidaitt 5521-50)
-1,Crt
7Air,t
-
?.?73..? .....
74,
3. Rails, railroad and crane 72
Rails, railroad, wide-gage (State Standards 8161-56, 7174-54, 7173-54,
3542-47, 672.6.-53) of the types R-65, R-50, R-43, R,33 72
Rails, railroad, narrow-gage (State Standard.6368-52), of the types?.
R-24, R-180 R-151 R-111 R-8 .73
Rails, crane (State Standard 4121-52) of the types KR-120,,KR-100,..
KR-80, KR-701 KR-60, Kg-,50
4: Grooved-end-tongued steel
A
Grooved-and-tongued steel having plane profileWM(State Standard It;
74
4781-55)
Grooved-and-tongued steel having channel profile-/(State Stand-
ard 4781-55)
Grooved-and-tongued channel steel of the Larsen type (Ferrous Metals ? ,
Technical Specification 5154-.55) .76 -
C. Shaped Steel - Profiles Most Commonly Used
1. Steel, periodic profile, for reinforcement in reinforced concrete construc-
tion, hot-rolled (State Standards 5781-53 and 7314-55), carbon and low-
alloy 78
2. Steel, for window and clerestory transoms/casings of industrial buildings
(State Standard 7511-55), ordinary quality..80
Steel, for metal transoms/casings of industrial buildings (All-
Union Standard 10029-39) . .82
Steel, for transoms/casings of industrial buildings (Ferrous Metals
Technical Specification 2920-56) 84
NOTE THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 O. S.
31 AND 32. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE. USAF.
UkCLASS7T.ED
(CLASSiiriCATiON)
16-2-6.570-1 * C. Loremilicirtfl,atIs. wrier
Declassified in Part - Sanitized Copy Approved for Release @ 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
AFFoulti4Iiirru (CLASSIFICATIO()
APPROVED Ink ma
AIR INTELLIGENCE INVC3RMATION REPORT
? V ?
PAGE
44.1'1 fd4-' ftifita4:Ukai*d'a'a: '' (red:Nal:cal ? Siaeiitica--
tion 2317-49)
3. Rails, type R-5 for surface and suspension roadways of agricultural enter-
prises, T-rails and double-head rails (State Standard 5157-53), made.of.
ordinary quality and quality steel. 86
4. Steel, spring-coil (State Standard 7419-55)
5. Steel, for file and rasp manufacture (State Standard 5210-50) 92
6. Steel, for boring-bits, twisted and non-twisted (Technical Specifications%
Standard 8-18-50; Ferrous Metals Technical Specifications 2891-51,
3560-53, 4860-54)
7. Steel, boring, bit, hollow (Ferrous Metals Technical Specifications 2894751;
Technical Specifications Standard 6063-54). 94
94
D. Sheet/plate and Wide-bind Steel
1. Regulation of the supply and demand of sheet and wide-band steel of ordi-
nary quality and quality grades (general instructions) .96
2. Steel, thin-sheet (State Standard 3680-47), ordinary quality and
quality
Table of standard (stocked) sizes of thin-sheet steel 107
3. Steel, thick-sheet (State Standard 5681-51), of a thickness from 4 t.o.
60 millimeters, ordinary quality and quality 109
4. Steel, thick-sheet, carbon (State Standard 6423-52), of a thickness from
62 to 160 millimeters, ordinary quality and quality 112
Table of standard (stocked) sizes of thick-sheet steel 114-115
5. Steel, wide-band, universal (State Standard 82-51), ordinary quality
and quality
6. Steel, sheet/plate and wide-band, for shipbuilding (State Standard,
5521-50)
105
120
120
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND n. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART, BY OTHER THAN UNITED STATES AIR FORCE AGENCIES; EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCLASSIFIED:
(CLASSIFICATION)
16_156570.1 * U. $. GCVCiwj PRINTING orrtcr
neclassified in Part - Sanitized Copy Approved for Release @ 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
'Ara.? Mk. ??????
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
? , ^
'AF FORM 1127--PART II
APPROVED 1 JUNE 1941
ukiorksIFItD
(CLANIVICATION)
AIR INTELUGENCE INFORMATION REPORT
.00-S
STAT
?PAGE
OF ? PAGES
7. Steel, thick-sheet, ribbed, checkered (All-union Standard 10026-39), ordi-
nary quality .122
8. Steel, thin-sheet, corrugated (State Standard 3685-47), ordiziary4PalitY,
non-galvanized 123
Table of standard (stocked) sizes of sheet/plate steel; light roofing sheet,
dipped steel, galvanized, corrugated, tin plates and untinned iron Plate,'
electrotechnical, tIoned steel, lead-treated steel 124
E. Calibrated/ked Quality Steel
1. Calibrated, cold-drawn steel ..127
Calibrated, cold-drawn round steel (State Standard 7417-55) 127
Calibrated, cold-drawn square steel (All-union StandardliKTP
Calibrated, cold-drawn hexahedral steel (A.11-142171m 'Standard NKTP7130)129
2. Steel, round, having increased quality of surface finishing and pre-
cise dimensions, silver-steel (State Standard 2589-44) ?130
II. Basic Requirementa of Technical
Specifications and Chemical,Composition of
General Instructions.
Ordinary.Quality Steel
A. Profile and Shaped Steel, Girders and
Channels
.32
1. Steel, profile and shaped, general purpose 134
Steel, profile and shaped, general purpose (State Standards 535-52,
t and 498-.51) stocked according to mechanical characteristics
(Group A).
Steel, profile and shaped, general purpose (State Standards'535 -52,
498-51, and 502-41) stocked according to chemical compositicn -
(Group B)
134
137
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 U. S. C.-
31 AND 32, AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE. USAF.
UtioLASSIFIED
(CULSSIFICATION)
111-96670-1 *U. S. GOVERNMENT 1.1914TING OFFICE: 1951 0-919739
Declassified in Part - Sanitized Copy Approved for Release @ 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
'1
' AF FORM 112?PART 11
APPROVED 1 JUNE 194
-
UNCLASSIFIED
(CLASSIFICATION)
AIR INTELLIGENCE INFORMATION REPORT
PAGE' OP 35
STAT
PAGES.
2. Steel, .profile and shapeds special purpose 138
Steels: rounds for rivet/pin manufacture (State Standard 499-41),'
diameters from 8 to 40 millimeters in rods, and from .6:to 14
millimeters An, skeins/coils ?
Steel, round,, for rivet manufacture, for shipbuilding (State Standard
5521,-50)t 138
Steel, round, for boiler connections (State Standard 536-53) 138
Steel, profile and shaped, for shipbuilding (State Standard 5521-50) 140
Steel, profile and shaped, for bridge construction (State Standard
6713-53) 144
Steel, carbon, hot-rolled, periodic profile for reinforcement in rein.1,..
forced concrete construction (State Standard 5781-53) 144
138
'IL Rolled Materials of ?Lo*-alloy Steel
C. SHEET/plate and Wide-band Steel
1. Steel, sheet and wide-band, general purpose
Steel, thin-sheet, general purpose (State Standard 501-52), stocked
?
148
according to chemical composition, tested for flex in cold state148
Steel, thick-sheet and wide-band, general purpose (State Standard
500-52), etocked according to mechanical characteristics
(Group ... . .. 150
'Steel, thick-sheet and wide band, general 'puipose (State Standard
? 00-52.).1 ;stocked ac'cording to chemical composition (Group B) 152
Steel, thick-sheets general purpose (Technical Specifications 521), of
thicknesses from 60:to- 120 11 imeterss ' stocked according to chem-
ical composition-(Group B)
, .
152
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND V.. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES, EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE. USAF.
UNCLASSIFIED
(CLASS1FICA11010
16-55570-1 * S. GOVERNMENT PAINTING Of 'Mt
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
.11??????????
? AF FORM 112-4ART
APPROVED 1 JUNE 194$
UNCLASSIFIED
mosstnornoto
AIR INTELLIGENCE INFORMATION REPORT
' ? PAGE IO ' ? 35??? pixes? ?
2. Ste. sheet/plate and wide-band, special purpose 154
Steel, thicksheet, for boilermaking (State Standard 5520-50), in
thicknesses from 8 to 60 millimeters 154
Steel, thick-sheet, for boilermaking (Technical Specifications 714),
in thicknesses from 60 to 120 millimeters 156
Steel,Abick-sheet,.hearth- and boilermaking, for locomotive manu-
facture (State Standard 399-41) 156
Steel, thin-sheet/plate, for shipbuilding (State Standard 5521-50) 158
Steel, thick-sheet and wide-band, for shipbuilding (State Standard
5521-50) 158
Steel, thick-sheet and wide-band, for bridge construction (State
Standard 6713-53).... 164
General Requirements of Technical Specifications
for Profile and Shaped, Sheet/plate and Wide-band
Steel of Ordinary Quality Grade.
D. Thin-sheet Steel of Various Types
1. Steel, thin-sheet ro4fing-type, galvanized and dipped (graded according
to State Standard 8075-56) 169
2. Steel, roofing-type (State Standard 1393-47) 170
...?
3. Steel, dipped (State Standard 1386-47) 171
4. -Plate, untinned, burnished (State Standard 1127-47) .173
5. Steel, galvanized (State Standard 7118-54) 175
6. Plate, tinned (State Standard 5343-54) 177
7. Steel, tinned (All-union Standard 25; Steel Technical Specifications-2)181
STAT
?;:
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 U S C.-
31 AND 32, AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART, BY OTHER THAN UNITED STATES AIR FORCE AGENCIES, EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCLASSIFIED
(CLASSIFICATION)
15_66670_1 * u. s. uortRunun PRINTING OFFICE
0,4"
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Ltz
AE,FORIA;1124PART II
APPROVE IJUNE14S'
?
UNCIASSI.F TED: -
(cLASOMATION)
AIR INTELLIGENCE INFORMATION REPORT
PAGE
11
3 5.
PAGES
STAT
I I ,
APPENDIX
1 ? , ? , ? ? ? , .1 ,
Theoretical Weight and Calculation Data
1. Profile steel
Round steel (State Standards 2590-51, 7419-55, 1133-41, 5210-50,
7417-55) 183
Square steel (State Standards 2591-51, 7419-55, 1133-41, 5210-50,
and All-union Standard HKTP 7129)
Straight-angle bar steel (State Standards 103-51, 7419-55, 4405-482'
5210-50, 6422-52) 1e4'
Hexahedral steel (State Standard 2879-51, and All-union Standard
NKTP 7130) 188
Equilateral angle steel (All-union Stanflard 10014-39) 189
Non-equilateral angle steel (A--union qandard 10015-39). 192
2. Girders, channels and rails
'196,
Girders, I-beam (All-union Standard 10016-39). 196
Channels (All-union Standard 10017-39) 199
Channels for rolling stock manufacture (State Standard 5267-50) 202
Rails, railroad and crane 203
183
Rails, railroad,
6726-53)
Bails, railroad, narrow-gage (State Standard 6368-52)
Hails, crane (State Standard 4121-52)
3. Sheet/plate and vide-band (universal) steel.
Thin-sheet and thick-sheet steel
Wide-band (universal) steel 210:
wide-gage (State Standards 7174-54, 7173-541 3542-47/
203
204
205
206
206
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND 32, AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART, By OTHER THAN UNITED STATES AIR FORCE AGENCIES, EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCI:gSS IED
(CUSMRCATION)
16-58570_1 * L L SOMIllitlrf PRINTING MI=
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
? AF FORM 112?PART 11
APPROVED t JUNE 19411
UNCLASSIFIED
(CLASSIFICAT)ON)
AIR INTELLIGENCE INFORMATION REPORT
STAT
PAGE 12
OF 35
PAGES
III. Basic Requirements of Technical Specifications and
Chemical Composition of Quality Steel
A. Chemical.Composition.of.Quality and High-grade Steel
1 Structural Steel
Carbon, quality steel ?211
Alloyed, quality steel 216'
Alloyed, high-grade steel224'
Oty
Roller bearing steel 234
Machine (avtomatnaya) steel 234
Spring coil, quality steel 234
Spring coil, high-grade steel _236
2. Tool Steel
Carbon, quality steel 239
Carbon, high-grade steel 239
Alloyed, high-grade steel 241
High-speed steel 245
3. Special Steel
Stainless and acid-resistant steel 247
Sinter-proof and heat -reej,staht.q.keel 253
Alloys having high ohmic resistance II
259
Steels having special physical characteristics
Steel for welding rod 263
Other special steels 269
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 U. S. C.-
31 AND 32, AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMISSION OF THE DIRECTOR OF
INTELLIGENCE. USAF.
UNCLASSIFIED
(CLASSIFICATION)
norinccifipri in Part - Sanitized Coov Approved for Release
16-55670-1 * U SGovatio PRINTING err:cc
50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
-
....-Ixere"areer
,
-
? AF FORMill2PART II
APPROVED. IJUNE 1948
UkaASSFiED
(CLASSIFICATION)
AIR INTELLIGENCE INFORMATION REPORT
PAGE 3.3
t-Yr=
V1,nen
STAT
OF 35 PAGES
B. Basic Requirements of Technical Specifications
Profiled & Shaped Steel
1. Structural Steel
,
1 ? ...... rt., ISO?Ot
Quality, carbon steel
Steel for anchor chain
273
278
Carbon steel, stocked according to individual technical specifications
'280
Carbon steel, for diesel manufacture
'281
Alloyed Steel
'281
Alloyed steel for rivet manufacture
290
Alloyed steel, stocked according to individual technical specifications
291
Ball and roller bearing chrome steel
296
Machine (avtomatnaya) steel
299
Spring coil steel
300
2. Tool Steel
Carbon steel
302
Carbon steel, stocked according to individual technical specifications
306
Steel, boring-bit, hollow
306
Steel, tool, having special profiles
307
Alloyed steel
308
Alloyed steel, stocked according to individual technical specifications
312
High-speed steel
313
3. sp1 Steei
Stainless, heat-resistant steel and alloys having high ohmic resistance
315
Special steel, stocked according to individual technical specifications
323
Magnet steel
327
NOTE: THIS DOCUMENT CONTAINS INFORmATioN AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT, 50 U. S. C.-
31 AND M. AS AMENDED. ITS TRANSMISSION OR THE REVELATION OF ITS CONTENTS IN ANY MANNER To AN UNAUTHORIZED PERSON IS PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. EXCEPT BY PERMM1ON OF THE DIRECTOR OF
INTELLIGENCE, USAF.
UNCLASSIFIED
(CLASSIFICATION)
16_55510-1 * n. GOTLIZERT PaISTIS; MICE
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20: CIA-RDP81-01043R004000170006-9
Declassified in Part - Sanitized Copy Approved for Release ? 50-Yr 2014/03/20 : CIA-RDP81-01043R004000170006-9
- -
LT:att.
IWPr.
AFf FORM AIVF-1ART-
APPROVED1 JUNE INS
UNOLAS?ifttp
(CLAOsir1CATtott)
AIR INTELLIGENCE INFORMATION REPORT
is
PAGE
14. OF 35
PAGE - ?
Cold-drawn Calibrated Steel
Structural Steel
Tool Steel
Steel, stocked according to individual technical specifications
Machine (avtomatnaya) steel.
Ball bearing steel
Spring Coil steel
Special steel
329
333
..334
. ..336
337
338
Silver-steel and Polished Steel
.339.
Silver steel
Polished steel
Thin-sheet/plate Steel
1. Structural Steel
Carbon, quality steel
Alloyed, quality and high-grade steel.
Steel for aircraft manufacture
Steel, stocked according to individual technical specifications.
2. Tool Steel
340.
341
341
.345
.348
351
Special Steel
Stainless, acid-resistant and sinter-proof steel
Electrotechnical steel
Steel having special physical
char-e,,erbt4es.
Structural carbon steel
Thick-sheet/plate Steel
358
362
JO, -
.372
STAT
NOTE: THIS DOCUMENT CONTAINS INFORMATION AFFECTING THE NATIONAL DEFENSE OF THE UNITED STATES WITHIN THE MEANING OF THE ESPIONAGE ACT. 50 U.S. C-
31 AND 32. AS AMENDED. ITS TRANshussioN OR THE REVELATION OF ITS CONTENTS IN ANY MANNER TO AN UNAUTHORIZED PERSON Is PROHIBITED BY LAW.
IT MAY NOT BE REPRODUCED IN WHOLE OR IN PART. BY OTHER THAN UNITED STATES AIR FORCE AGENCIES. E
A 4
CI
a 0
c