SCIENTIFIC ABSTRACT KAZAKOV, N.F. - KAZAKOV, S.P.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000721310006-1
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: June 13, 2000
• Sequence Number: 6
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

t 2(-054,65
ACCESKON NR: All,*,10084L;2
ASSOCIATION: nonc
SUBMI -if ED., 071-lar62 MICL: 00
NO REP SOV: 003 OTHER: 000
SUB CODE:
Card 3/3
R-4

f f.-, ;4.c,n bnn,ii ng I,' P': r. pro * ";,r.
3 '63.
-,nn(w n-irk!
W"Vne

KAZAKOV, N.F., doktor tekhn. nauk, prof.; NOVIKOV,
I.A., inzh.
Diffusion welding of magnetic alloys. Vest.
mashinostr. 43
no.lOz84-86 0 163. (MIRA l6tl-I)
R;4,

KAZAKOV, Nikolay ~Iedotovich,- doktor teklin.
nauk; USFAKOVA,
Svetlana Yevgen-ry-6-VMj kand. tekhn. nauk;
TYULIKOV, M.D.,
red.
[Diffusion bonding in a vacuum of some brans of
high-
alloyed steels) Diffuzionnaia svarka v vitkuume
nekotorykh
marok vysokolegirovannykh stalei. Leningrad,
1964. 18 P.
(1-111RA 19:3)

CHARUKHINA, Kira Yevgenlyevna, inzh.; KAZAKOV,
Rikolay Fedotovich,
doktor tekhn. nauk, prof.; FOLISHCHUK, G.V.,
red.
[Diff'usion bonding in a vacuum of diversified
metals] Dif-
fuzionnaia svarka v vakuume raznorodnykh
metallov. Lenin-
grad, 1964. 22 p. (MIRA 18:4)

ACCESSION NKS AP4042220 ?S/0135/64/000/007/0013/0015,
.AUTHORi Krivoshey, A. V, (Znginear); Kazakov, W, F. (Doctor of
tech-
q
1,nical scienlies)
TITLE: Vacuum diffusion welding ~f some refractory metals
JiSOURCEt Svarochnoye proizvodstvo, no. 7, 1964, 13-15
:TOPIC TAGS: welding, refractory metal welding, diffusion welding,
,vacuum diffusion welding, niobium welding, molybdarium welding,
tung-
Aten welding. niobium molybdenum weld, porous metal welding, 4isaim-
!ilar natal welding
'ABSTRACTs The feasibility of vacuum diffusion welding of similar
and'
Idissinilar refractory metals, porous refractory metals, and metals
:with.different expansion coefficients has been investigated. It was
;found that niobium can be successfully diffusion welded in vacuum
at
1400C.under a 1 kg/m=2 pressure maintained -for 5 min, but in
molybdA-1
,nun welded at 1600C with a I kglmm2 pressure lack of fusinn
'sao,ob-
serv". With a. molybdenum insert 50p thick', a sound welo was
-,btainadJ
'Good quALlity welds; Ln tuagAten wiare obtained with the use of a
molyb-
I
1:Card

IACCESSION HR: AP4042220
Idenum foil insert. Tungsten was successfully welded to molybdenum
at'.
2000C under a 1 kg/mmi2,presiure waintained for 10 min. 1p diffusion
ff
welding of metals witb,di erent expansioi coefficignts, e.p,.
niobium.,
to 40Kb steel,, molybdenum to 45-steel, and molybdenum to lKhIBN9T
steel sound veld r, wi-th good penetration,were obtained a~ 1100C
under
a I kg/mm2 presisure tiaintaLned for 20 mtn and withoqt using an
insert.
Plateb of zirconium 0.1. mm thick were welded to
manganeqe-galladiuni
-alloy plates of' the same thickne 'as at 850C under a I kg/mm
pressure
maLntaLned for 30 min. No Weld.cracks were detected in spite of a
great difference in the coefficient of linear . expansion and the
weld-,
Lng's being per;'ormed without.'benefit of an insert. Airtighr welds
weie obtained between copper and molybdenum, tungsten, or rhenium..
Good results were also achieved in the diffusion welding of porclis
niobium to dense molybdenum, performed at 1400C under a 0.5-kg/mmz
press.ure maintained for .10 min. . The: nidbium porosity was not
inq)aired.
Similar results. were obtained in welding porods tungsten or,
molybde-
num-to nickel. Orig. rt. hast 7 figures.
/a
JASSOCIATIONt NILDSV
12/
Mosgoi!sovnarkhoz

KJIUDYSHEV, Anatoliy Fedorovich;,KAZAKOV, N.F.P
red.
[Diffusion bonding in vacuum of parts and
weldments of
electric vacuum equipment] Diffuzionnaia svarka
v vakuume
detalei i uzlov elektrovakuumnykh priborov.
Leningrad,
1965. 20 p. (YIIRU~ 18:5)

L 26108-65 D?1- (n)/Fr-?'(n -2/04A
(d)/~91P(v)A/L'4P(t)/EVP(k)/EWP(b) Pf-h/Pu_~j
ACCESSION AT'40117112f) T TT-,(r.) ?.%_T*V/jL1/Tf?j/7,-,
__AVT_1-10R- ]~~a --ko~ - N,-F
_~~q v- ----Kr-jv6!-;he Y-0; G~ - _is~Lpv~, V. 1.1 Y~r
- . M p -_ --T
w 4TA-41 - 5& o L. A., A. _V.
Kasatkin, N M D-Vo B;dy-ako~ q5-
TITLE: Vacuum diffusion welding of bimetallic rtrips for thermostats
if
SOURCE: Tsvetnyy metally, no. 10, 1964, 66-67
TOPIC TAGS: diffusion weldhig, vacuum diffiislon welding,
thermostnt, bimetn].
manganese alloy, clad metal/ alloy 75GND
ABSTRACT: 'flie authors, wsed the voct.-LIM diffkislon welding
mcthod developed bv
Prof. N. F. Kazakov (Diffu7ionnaya qv,,j-*,,a v val(11111pe.
mcqaljov, spj!ivo,,- I no-M,11
1-:6. NIL DSVMI, M., 196-21 W prepare stmiples of lite rni os tal
nivl~ls Thr r(n-
sisLed of fo ur operatiors; 1, cold rollipgl of the component motAR
into strips of frivcn
tt~ Lll~ ~J., (-1 al""'e- 3 cle;4nirij, 1"d fl
'LJ -1. ~:LL %veldinw of t1if, 'md :1,,tl ve
Tho vomnumni p'Umie-ki wt-3j-V- voUl'u'led at ttlez laboratoriw_t
i-M
Ln o-Rpspa n - Tf
A.losgorsovnarkhoz, using an SDVU-6 vacuum diftnoton
thermostat metal obtained were tested for specific bending at the
TsNHChM (Central
--Curid- 1/2
r1pU V,

77~-
1, 261o8-65
ACCESSION UR: AP4047426 6Z
Scientific lleseamb InsUtuto of Ferrous Metallurgy), One of the
tested compositiom
(the III rh -mi:L[i galle-q e alloy 75( INI) plus m,)!jj~~um~,jyne
found to meet the maximmy!
(Lq li~C~e!-Aing A 0. 151) ('). The experlynontal vork
pecl
)P,,1 Sr -Vfusion permit-q 11 substariltal
11 o rT- I I -
process of flll(trl~T ll('W bTiMdO Of Lilt) rmo,4, tat metalti and
an appreciahk, s,--,wim-, of
and development cosLi. Orig. art. has: I figurc and I formula,
ASSOCIATION. none
SUBIN111,71 Ek): ",q" ()(I SUB (")DE- `V
,40 RFF SOV: 001 OTHEA: 000
Cord 2/2

L 1645-66 E?A (a)-2/EWT(m)/EWP(Y)/T/EWP(t)/EWP(k)/MP(b)/EU (c)
JDIM
jAcCEssioN Nn: AP5021622 UR/0286/65/000/013/0102/0103 i
62i.791A
I ~ r i
46
AUTHOR: - Kazakov, IV. F-'; Krivoshey, A. V.; Sudenkov, Ye. 0.
,y
TITLE: Method for diffusion bondin r materials in gas atmosphere.
Class 49,
No. 172606
V f,
JS(MCE: Byulleten' izobretenly I tovarnykh znakov, no. 13, 1965,
102-103
TOPIC TAGS: joining, bonding, material bonding, diffusion bonding
ABSTRACT: This Author Certificate Introduces a method for
diffusion bonding of ma-
terials in gas atmosphere. To increase productivityand improve
bond quality, the
bonding is carried out in an atmosphere vhich promotes the
formation of the bond.
For example, bonding of a metal to nitride is done in nitrogen,
bonding a metal to
carbide is done in hydrocarbon. [AZ]
iASSOCIATION: none
suBmiTm: o5mar63 ENCL: 00 SUB CODE- HK
NO REF SOV UXUR: 000 ATD PRE35: Tv T-2
Card 1/1
a
gt&
-.j

S
L 14460-66 EWT(m)/El~*t.y)/T/EWP(t)/EWP(k)/EWP(b) JDIHM
ACC NR: AP6002967 ~SOURCE CODE: UR/0286/65/000/024/0136/013Ei
INVENTOR: Kazakov, N. r.; Krivoshey, A. V.; Sudenkov. Ye. G.
ORG: none
TITLE: A method for vacuum diffusion welding of metals. Class 49,
No. 177259
SOURCE: Byulleten' izobreteniy i tovarnykh znakov, no. 24, 1965, 136
TOPIC TAGS: vacuum welding, diffusion welding
ABSTRACT: This Author's Certificate introduces a method for vacuum
diffusion weld-
ing of metals. The components are individually preheated. Welding
time is reduced
by heating the components at different temperatures so that the
metal is vaporized
from the surface of the hotter compcment and the metal vapor is
condensed an the
surface of the cooler component.
SUB CODE: /3 SUBM PATE: 07Apr64
'Card 1/1
---621.791.66-982
!Vla

PTI/E (k) -A 1MV1
V)/M'(Q/L VP 1)
ACC NRi AP6034765 SOURCE CODE1 UR/0407/66/000/001/0062/0066,
AUTHOR: Kazakov, N''. F. (Nikolayev)i Kvasnitakiyj V. F.; Safonov,
A. I.; Yermolayev,
G. V.
ORG: none
TITLE% Vacuum-diffusion bonding of the surfaces of E1602 nickel-base
heat-resistant
alloy
SOURCE: Elektronnaya obrabotka materialov, no. 1, 1966, 62-66
TOPIC TAGS: nickel base alloy, high temperature alloy, diffusion
welding, alloy
dif f usion welding, alloy vacuum welding, vacuum weldin g te
chnology/E1602 alloy
ABSTRACT: Experiments have been made to deternine the optimum
conditions for
vacuum diffusion bonding of the surfaces of E1602 nickel-base
heat-resistant alloy,
The bonding was done at 1373, 1423, 1448 and 1473K under a specific
pressure of 1.0,
1.5j02~0t. 2 5 3.0 and 3.5 kg/mm2. The machined specimens were
annealed in avacuum
of .r: h. 3- 10-2 n/m2) at the bonding temperature for 3 min,
pressed and held
together for 6 min under a given pressure and then air cooled. The
best results were
obtained at bonding temperatures of 1423-1448K under a specific
pressure of
2.5-3.0 kg/mm2, a holding time of 6 min, and a vacuum of not less
than 10-4 tor.
The better the faying surface finish and the shorter the time
between their machir-ing
and bonding, the higher was the bond strength. The bonds made under
optimum conditiol
Card
"V

L 08538-67
_ACC_W_AIF6_0S4_i6_5
had a tensile strength of 72.0-76.2 kg/mm2 and an elongation of
37.3-45.6% at room
temperature; the corresponding figures at 1073K were 35 kgjmm2 and
27%. All these
indices corresponded or were close to those for the base metal.
Diffusion bonding
with intermediate nonmelting nickel inserts 7.1 mm thick was done
at 1423K with a
holding time of 6 min. The tensile strengt 16f these bonds was 80%
of the strength
of the base metal at room temperature and 100% at 1073K. Annealing
for 8 hr at the
normal operating temperature of E1602 alloy (8000 did not affect
the tensile strengt:
and ductility of the joints. But the streas-rupture strength was
appreciably lower
than Pat of the joints without inserts. The mechanical properties
of the jointe wit
nicks% inserts can be increased by decreasing the insert thickness.
Thin melting
ioil and electrolytically or vacuum-evaporated intermediate films
can be used to
ensure satisf0 tory contact in low-pressure (about 1.0 kg/mm2)
diffusion bonding
of thin-sheet structures, Orig. art. has: 6 figures.
SUB CODE: 13 SUBM DATEs none/ ORIG REY: 003/ OTH REP: OOl/ ATD
PRESSIZ 5103
Cntd 2 2,

ACC NRa AP70011206 SO---- 159
URCE CODE: UR/0407/65/000/05-/0154/0
iAUT11OR: Kazakov, N. F. (Moscow); Nichushkin, V. V. (Moscow)
IORG: none
7TITLE: Determination of the conditions of vacuum-diffusion
bonding of VT1-1 titanium
~SOURCEt Elektronnaya obrabotka materialov, no. 5-6, 1965,
154-159
TOPIC TAGS: titanium, vacuum diffusion titanium diffusion
bonding, diffusion
bonding condition, 6onded joint strength/VT1 titanium
ABSTRACT: Specimens of VTI-l commercial-grade titanium were
diffusion bonded in a
vacuum of 10-1-10-11 tor at a temperature of 650-IOOOG under a
specific pressure of
0.1-1.5 kg/mm2 with a holding time of 1-25 min and cooled to
100-400C in vacuum.
The results of tension tests showed th, of 10-3 tor in
-it the joints bonded in a vacuum
the 750-950C range under a specific pressure of 0.2-0.85 kg/mm2
have a tensile
;strength of 55-57 kg/mm2' equal to that of the base metal
annealed at the respective
I bonding temperature. The maximum tensile strength (60 kg/mm2)
was achieved with
MM
~bonding in a vacuum of 10-3 tor at 800C under a apecific
pressure of 0.7 kg/ 2
a holding time of 8-10 min, and cooling to 200C in vacuum. The
strength of the
joint is determined mainly by the specific pressure and
temperature of the bonding
,process. Generally, the specific pressure is 60-70% of the
yield strength at:the
1~qFd 1 2

1 ACC NRz AP7001206
bonding temperature. The diffusion-bonded VTl-1 parts tested
to destruction failed
in the base metal. Orig. art. has: 8 figures. IMS)
SUB CODE: 13/ SUBM DAM none/ ORIG REF: 0051 ATD PRESS: 5110
_r,
Card

ACC NR% ArToo6686 (A SOLICE CODE: UR/0145/66/000/010/0178/0180
AUTHOR: Kazakov, N. F. (Professor)
ORG: None
!TITLE: Fourth Intercollegiate Scientific and Technical
Conference on Vacuwn Diffusion
Welding of Metallic and Nonmetallic Materials held in Moscow,
27-31 May,1966
SOURCE; IVUZ. Mashi-nostroyeniye, no. 10, 1966, 178-180
4 0't"C/C
.TOPIC TAGS: vacuum welding, diffusion welding,,GaientJFr:4L*
conference
ABSTRtICT: The Fourth All-Union Scientific and Technical
Conference on Vacuum Diffu-
sion Welding of Metals, Alloys and Nonmetallic Materials held in
Moscow 27r31 May
60' was attended by 600 representatives of institutes and
special design offices from
11479 cities, 18 ministries and 160 enterprises wid
organizations. The conference opened
6ith a report by Doctor of technical sciences, Professor N. F.
Kazakov titled " iffu- I
I D A
A
Sion Welding of Metall-ic and Nonmetallic Materials, Application
in Industry and Pro-
:spects for Development". The advantages of vacuum diffusion
welding over conventional
juethods are discussed and it is pointed out that the new method
may be used for weld-
iing materials which cannot be joined in any other way, e. g.
steel with cast iron,
~aluminum, tungsten, titanium, cermet and molybdenum; copper
with aluminum and titanium;!
gold with bronze; platinum with titanium; silver with stainless
steel; bronze with r
Card 1/2
R1,
ff
6

ACC NR, AP700 686
ivarious metals; ceramics with Kovar, copper and titanium; glass
with metals, etc.
r1ore than 200 industrial enterprises, design offices and
scientific organizations in
,the Soviet Union are presently making successful use of this
welding method. More
than 200 experimental and industrial vacuum diffusion welders are
presently in opera-
,tion. A report was given at the conference by Candidate of
technical sciences V. S.
Savchenko on the plan for production of diffusion welders for
1966/70. Various re-
ports were also given on the use of diffusion welding in the
vacuum tube industry,
'gear cutting, production of turbine blades, making electrical
contacts from precious
petals and alloys, etc. Other reports were given on the use of
diffusion welding for
Ijoining nonmetallic material8 and metals with nonmetals, the
state of the art and pro-
Apects for development of diffusion welders, development of
specialized !diffusion
~relding installation's and methods of nondestructive quality
control. The names of the
authors are listed. Seventy-six reports in all were given. The
delegates to the
,!conference visited the "Kalibr" Plants of the Ostaakinsk Heat
Processing Combine and
,~the Scientific Research Laboratory of Problems in Vacuum
Diffusion Welding where the
method was demonstrated with application to components made of
various metals, alloys
and nonmetals.
SUB CODE. 13/ SUBM DATHt wui66
Card 2/2

KAZAKOV, Nikolay Fedotovich, doktor tekhn. nauk,
prof.; KRAPUKHIN,
[Diffusion bonding in vacuum o.L metallic and
nonmetallic
materials] Diffuzionnaia svarka v vakuume
metallicheskikh
i nometallicheskikh materialov. Leningrad, 1965.
31 p.
WIRA 18:7)

KAZAKOV, N.G., kandidat tekhnicheskikh nauk.
khe most important problems in machine building: a congerence on
over-all mechanization and automation In machine building. Vest.AN
SSSR 26 no.12rlo4-107 D 056. (HUIA 10:1)
(Machinery inaustry)
Ell-,
4
R

BOGOMOLOV, V.D. [Bohomolovp V D.); KAZAKOV, N.I.;
LIMN, G.Ye. [Linov,
IIIE 11 FADEM, I..P iFadieiev., i.F.]; vomov, i.P.;
ZVYAGIN
S.D: ZvliaLhin,, S.D:I; CHUDNOVSKIY, P.I.
[Chudnovetkyi, P.I.1;
ROMAMHENKO, V.mq
In the economic councils of the Ukraine, ,h,prome
no*3.84-87
JI-S 163, (NIRA 16:11)
1. TSentral.Inoye byuro tekllikicheskoy informatsii
Ilbskovskogo
gorodakogo soveta narodnogo khozyaystva (for
Bogomolov, Kazakov,,
Linov, Fadeyev).

-

-
t W IOL'
OGA
r
_F 9
a
1 K L' -N P- Q a J---

-KfISIS A~ 'Is mpi I

so

00

S1-U& Mani 111~!ar
for Amembl
1
004

1. vtbras"% of T
WrWing of
0

rramm N. L Karalia At to
Dola tWeldinu;. Autt. 194 . 27 .2

o:

Rumiall.)
welditut tviWo
t'lu
e
u
l
06

ruct lon of a ha
a
r
on
=d

toot to facilitate such operation
00

'3

0

A
y
rn-lon
o
5
n
ndililit
s.
U IL at
0 1. It 19
0004 00000 000040
lease *0000:::::::00004000100*000606&6oo
I A I a a a
NOW
LP
I p p
4 3.
i
1-00
-99
and
nnor
1111 -00
a
pit. 0
Zoo
1300
coo
too
Isoo
00
"to
Do 0
U60
*00
a, 2
5 1 - v 4 it 'A I 'w
UD n I -
00 0000000000900 0099940
0*0 A

0 0 OWPOIT-6 M-TW--- 11
10 to u I Is to 0 IS )A 15 It v isTit V 4u 13
& L. 1. 1 14 T j , 9 1. -1
a A AA T"
60 U
0041
go
0011
go a
004 1
00 ;, 12.?At. 312. 1.1, WOlding ftnd V"t"nj'
got N I. Kankov. Arlogell"Oe DOO (WO
inu, Rept. 1947.1).27-30. 1111"lull
090,
000 ...
90
too
as*
a,**
-00
too
Zoo
I-e
r0:
ueo
OCA
0 0 0 6 0 0 o k 0
0 0 *_q o o 0 0 Ole 00 0 -0 0 0 0 0- 0 0 a * 0 0

F
1~410 0 0 0 0 0
1, WW

0 0 st 0 9 w

4p 0
41 a a 0 0 0 9 0
~
'

-r 0

00 4

L
L
AA 0 %E M it

:

4< Fee

0

f

00

00

'
00
,

all.
:* !

Detalls of Melit" and p"dw-
t6- *1 COMM"Vial Squ
at far Aa.
b1
4 W
r

as
.00

-
Arl
y a"
q
r Karakow.
oge IVA-
-xvioc 40 1 lillagi. no. 3.1947.
31
32
l

As

'

P
-
. t
n Lmdgm)

no*

dialtranw.

no

*a-

see
AA
if
I L ARIVALLL*'K.L LITIVAIL01 CLal%lNc.TNp
Avilo
%too[ Wallis ICU" U111
t
a a 4
0 0 a
An dl u 0 Kimono T-8--in
see**** 0 0 0 19 0
0 p 0 0-0-0 0-0 0 0 0 0 0
.1"0f
roe

KAZAMV, N.L. inshener.
Use of compressed air In assembly and welding attachments.
Vest.
mash. 27 no.3:68-72 147. (MLRA 9:4)
(Pneumatic tools)
STAND FC LISS
,Y )R Ti;!~ I F,'rJLY MD ISIDING OF TM7, "IDS c-
23-;3~5T. M 14MMOU). The procoditra for flic vzccul;ly vnil
-0n,
wc1d.11nC of the aidas of railway w63=0 and 6 CKOIV-7- St
''
for holding tho sidos which wesure apprordrately 27100 x 3:
x 100 im. are described.
1myodirl- sourca clipping

I'Al 49T30
Welding - Eq,tipment
Welding - Apparatus
Jul 48
"Welding AssembLy Equipment," N. I. Kazakor), Engr,
21 pp,
"Aytogeanoye Delo" No 7
Describes various templates, adjustable stands, eto.
IMK 12-/49T.3-0

.:-.. I- . .. ,...I . -1 ;- - -'~` ,
. Oll -- f. MEMEM=
KAZAKCV, I.I.I.
30313
ncrmalizatsiya ilyemyentov sborochno svarochncy csnastki, Avtogyen.
dyelo, 1949 No lc%
s. 26
SCP LETOPT"I No. 34

KAZAKOVI NPI., inzhener.
..'m
Turning units used in forage harvesting.
Sellkhomashina no.3,
17-18 Xr 156. (MIRA 9:7)
(Agricultural machinery) (Hay--Harvesting)

-- - - ; . , - . , ~ ~ -.- - : - - . ~ 1, 7
XAZAKOV. N.I.. inzbener.
~. - ~
The number of
12-17 D 156.
cutter bare in one mower.
Sallkhosmashina no.12:
(HLRA 10t2)
(Mowing machines)

GRU14-GRZHIMAYLO, Sergey Vladimirovic AKOV, N I inzh ,
retsenzent;
VABILITEV, S.A., inth., r d.:50 te;.;;.red.
[Analysis and principles of design of transmission
eleuental
Raschet i oenovy konstrmiroveniin elementov privodov.
Moskva,
Goo. nauchno-takhn.izd-vo mabhinostroit.lit-ryt 1958.
335 P.
(Gearing) (MIRA 12:2)

IF ill
Ire
t fit I
14 B
to

T 7
h A
o",
Mx 4
.%:14 0.
Mon -
ULN
go,
41
jj M1.4
I I
rl

" t - - a
.."A
P

-
,

of- a u

%.

0.

0

--
I"
U
S

at

i
A

11SH

r,"
H 14,

1

4 A a r.1

4

s/148/61/000/011/001/018
E071/E180
AUTHORS: -Kazakovs__BJ-., and Filippov, S.I.
TITLEi Kinetics of oxidation of carbon in liquid steel under
conditions of electromagnetic stirring
PERIODICAL: Izvestiya vysshikh uchebnykh zavedeniy,
Chernaya metallurgiya, no.11, 1961, 15-21
TEXT: The influence of magnetic stirring on the kinetics of
oxidation of carbon was investigated on a laboratory apparatus.
In preliminary experiments, using mercury as a liquid metal, the
most suitable position of a stator (from a two-pole motor) and
the necessary voltage to obtain an energetic rotation of the
metal
in a small crucible were established. Carbon dioxide was chosen
as an oxidising gas. Heats were treated at C02 flow rates of 75,
125, 200 and 323 mp/min. As a starting material soft iron and
V//
pAg iron smelted from electrolytic iron were used. 'Astractor's
note. Electrolytic iron contains no carbon; how can it give pig
iron?] The weight of a charge was 300-350 9 (the diameter of
the magnesite crucible 31 mm). A nozzle of 3 mm diameter was
30 mm above the surface of the metal in all heatsi the position
Card 1/ 5

Kinetics of oxidation of carbon S/148/61/ooo/oli/ooi/o18
E071/El8o
of' the metal in respect to the stator and heater was also
constant.
ALtogether 28 experiments were carried out with and without
siirring the metal, at temperatures of 1540-1570 OC. In some
heats the metal was ntirred in both directions. Kinetic curves
of
decarburisation vere oNtained for each series of heats with a
gi-ven rate of supp.Ly of the oxidising gas. In the range of
higher
carbon concentra.,.,lons (up to about 0,20,11) the experimental
points
ottained with and without stirring fell on the same straight
line.
The experim,,:ntal results agreed well with the kinetic equation
for the dijcarburisation of metal at carbon contents above the
critical concentration;
d[C] 1 W P
d T VM 2
The rate ~jf oxidation of carbon d[C1 le/cM3 min is
d T --
determined by the rate of blowing the oxidising atmosphere
(k- cm3/min), the content of oxidant (PO 2. mole/cm3) and the
volume
of the metallic bath (V, cm3). The coefficient expressing the
Card 2/5

Kinetics of oxidation of carbon ...
s/l48/6i/ooo/oll/ool/oi8
E071/EI80
utilisation of the oxidant reflects the flow characteristics
vf the oxidant stream and the surface conditions of the metal.
In the range of carbon concentrations above the critical, the
rate of decarburisation is independent of stirring, atid the
limiting factor iB the transfer of oxidant from the stream to
the
reaction zone. At carbon concentrations below the critical, the
limiting factor is the transfer of carbon to the reacting
surface
and the experimental results conform to an equation:
d[C]
d T = Yc . S/VM [C] (2)
Yc = -2.303V /S log f'C3 (3)
M A -1
T.ae rate of decarburisation depends on the reacting surface of
Cie metal (S, cm2), its volume (VM, cm3) and is directly related
to the concentration of carbon CC3, mole/cm3. The effect of
stirring can be evaluated from the ratio K of the diffusion
coefficients of carbon in liquid metal, with (yc) and without
(y.)
Card 3/ 5

Kinetics of oxidation of carbon ... s/148/61/000/011/001/018
E071/El8o
ntirring.. corrected for the change in the surface area of the
bath
K = Ycly,
The influence of electromagnetic stirring can be presented by a
general equation expressing the dependence of K on the voltage
applied to the stator (tJ) :
K = A - Un + B (5)
where A and B are coefficients, n is the power index. Under
experimental conditions n < 0.5. AccordinZ to experimental
data (Fig.6) the influence of stirring depends on the applied
v3ltage and the rate of supplying oxidant to the metal.
Electromagnetic stirring can also speed up other refining
processes providing the concentration of an admixture is below
the critical one. 1.M. Kirko is mentioned in the paper in
connection with his contributions in this field.
There are 6 figures and 5 referencess 3 Soviet-bloc and 2 non-
Soviet-bloc. The English language reference reads as follows:
Rof'.1. S. Fornander, F. Nilsson. J. of Me ta Is, v. 1118, no.
1-2, 1950.
Card 4/5

s/A8/6i/ooo/oii/ooi/o18
Xinetics of oxidntion of carbon ... E071/El8o
ASSOCIATION: Moskovskiy institut stali (moscow steel institute).
SUBMITTED: June 15, 1961.
Fig.6 The influence of stirring on the decarburisation of metal
at carbon concentrat*ions below critical. Rate of supply
of C02: 1 - 75 mt/min; 2 125; 3 200; 325 mf/min.
ff
5 7-A TOR, V
V04-TACLO' ON
Card 5/5

KAZAKOV, N.I.J. takhnik; AARSKIY, B.S., inzh.; KOVALENKO, N. Ye.,
inzh.
SADOVOY, M.G., inzho
Using metal falsewo*k and a concrete placer in the lining of
galleries.
Shakht. stroi. 5 no.6124-26 Je 161. (MIRA 14:6)
1. Leninogorskoye shakhtostroyupravleniye.
(Mine timbering)
R

K.I, EOVAIEIMO, N.Ye., inzh.;
AMIRSKUY, inzh., L i -
_, inzh.; I
SADOVOY, M.G., jnzh.
The LPBU-2 pneumatic conczete placer for tunes.
Mokh. stro".
19 Do.5!24--25 My ~02. WIRA 15:5)
(Concrete corLstruction)
(Tunnel lining)
M
x"

KAZAKOVp N.I., tekhnik; AMURSKjy.* B*S.,inzh.,-
IMVALENKo, N.Ye., inah;
---- - - - --b-=VDY , M.G...inzh.
Drilling rig with automatic devices for bore hole
sinking.
Shakht.stroi. 6 no.2112-16 F 1629 (MIRA 15:2)
1. Leninogorskoy.-j shakhtostroyupravieniye. ;1
(Rook drills'
j

. . ~ -~ I -:: , ~,17: - -Ii~lr R;2;47~ ~e., P; ~, , , ~ - .
- KAZAKOVP-N.I.j,.--tekhnik
&stoning cables in mine shafts. Shakht. stroi. 6 no.5:27-,w My '362.
(MIRA 15 :7)
1. Leninogorskoye shakhtontroyupravlenip.
(Electric cables) (Electricity in mining)

KAZAKOV,..N.I., gornyy tekhnik; AKJRSKIY, B.S., gornyy
inzh.; KOVALENKO,
N.Ye., gornyy inzh.; SADOVOY, M.G., go..Vy inzh.
Support and drill steel holder for core drills.
Gor.zhur.
no.8:67-68 Ag 162. (~aRA 15:8)
1. Leninogorskoye shakhtostroyupravleniye.
(Core drilling-Equipment and supplies)

KAUKOV, N.I., ornyy tekhnik; YUNOVICH, M.I., gornyy
inzh.;
RUDRYAVTSEV,, Yu.I., gornyy inah.; SMOLDYREV, A.Ye..,
kand.tekhn.nauk; MARKOV, Yu.A., gornyy insh.;
KURBATOV, A.K.p
gornyy inzh,
Study of the operation of a hydraulic hoist in the
"Belkina-
Ventily,atsionnaya" Mine. Gor. shuro no.6:43-47 Je 162,
(MIRA 15:11)
1. LeninogWakoye ahakhtostroyupravlaniya (for Kazakov).
2. Vessoyuznyy rAuohno-issledovatellskiy institut
tavetnoy
mete.llurgii,, Usti-Kamenogorok (for Yunovich,
Kuftyavtsev).
3, Inetitut gornogo dela im. Skochinskogop Moskva (for
Smoldymvp Markov, Nurbatov).
(Loninogorok region (East Kazakhstan Provinoo)--Mine
hoistime

KAZAKOV, j4j.."Iektoromekhanik
Remote control of an electric drive using one line,
Energetik
10 no.6:24-25 Je 162. (MIRA 16:3)
(Remote control) (Electric motors)

KAUKOV, N.L., takhnik; KOVAIAM, N.Ye., inzb.
- C-
New supporting drill-steel bolder for core drills.
Shakht, atroi.
7 no.1:22-23 Ja 163. - (MIRA 16:2)
le Leninogorskoye pbakbtostroyupravloniye.
(Boring machinery-Equipment and supplies)

KAZAKOV, N.I., tekhnik
Remote control of an electric motor usinR OnP- line.
'Jhqkht.strI7,4
7 no.5;25-26 My 163. (M:RA 17:4)
1. Leninogorskiye shakhtostroitellnoye upravleniye,
Vostochno-
Kazakhstanskiy sovet narodnogo khozyaystva.
-P

l.. KAZAKOV, N. P.;DDRISCV, N. P.
2. USSR (600)
4. Ceramic industries
7. Perfecting the technology of faience sanitary products.
Stek. i ker. 9, no. 9, 1952
9. Monthly List of Russian Accessions, Library of Congress, Januar7
-1953. Unclassified.
-R4
Q

IV.
bow
WAW7 &,,*,
Is&
&
.111.h

P T
CEUMICOV, Ye.A., akademik, glavVy redaktor; AXOPOV, S.A.,
redaktor; ARTOBO;-
L&VSKIY, I.I., redaktor; ACFmRKA , N.S., redaktor-,
BZZP!HOZVANNYT. 1.M.,
redaktor; GUDTSOY. N.T., redaktor; DIWISHIN, V.I.,
radaktor; Y3CFB3MOV,
A.I., redaktor; ZLPLROZHZTS. V.K., redaktor; ZIMIN, A.I.,
redaktor; U.-
I OV, N4,. redaktor; KUTICHEY. H.V., redaktor; KOVAN, T.H.,
redakf'or;
K&046=114. Yu.P., redaktor; LIPGART, A.A., redaktor;
MALTSHBV, V.A., re-
daktor; YARTRUS, L.K., redaktor-, YARIIM03AU, L.K.,
redaktor; NIKOIAYICV,
G.A., redaktor; ODING. I.A.. rodaktor; PATON. Ye.O.,
radaktor; HARZIN,
1.K.. redaktor; RUBTSOV, N.N., redaktor; SAVIRIN, M.A..
redaktor; S1M1N-
CHRKO. I.L. rodaktor;SIRUZZ. S'7., redaktor; SH&KNI, N.A.,
redaktor;
SHE T,.L.N., redAktor; SNUKHULIX;i. L.Ta., samestitell
glavnogo re-
daktora, redaktor; TAKOYLIV, A.S., redaktor.
[Machins construction encyclopedic handbook)
Mahinostrosuie; entsiklope-
dichaskii spravochnik. Part 1. (IngineerUg calculations In
machime
coustruotiou] lushenernys raschety v mashinostroanii.
Moskva, Goo. rAuch-
no-takhn. izd-vo mashinostrolt. lit-ry, Vol. 1. no.l. 1947.
548 p.
(Mec%anlcal engineering) (mu 8:1)

1. KnZ,-,KC71r, N-- S.
1. US.,;,-,L (600)
r-
4. M;chimry in Industr7
7. Nei: technical processes :in the s:rvice of communict
construr--tion. Me"Ch. trud. r3b.
6 no. 11, 19.52.
9. Monthl List of Russian Accessions, Libr.-try of Congi-ess,
March 1953, Uncl.

r% , ! _ " -, ,- ,. -- )
p -1 - -. -
mr, =%f -O.I.PuL 5h
Ro,,,idcavp G.I. Kaz akov., N.Sh.,," The Fact,)rs of
A.iemiatt.'Veteri.nariya,,,Ilo.2-3,i94),)
SO: Proceedings of the All-Union Instituteof
19,No 31,1952
L3callty in Infectiour Equine
Experimental. Vetcrinary 14adicine,Vol.

rAZAIC _jj
At the Ordshonokidze Plant Staro-Kramatorek. Izobr. v
SSSR 1
no.4:38-39 0 156. (MMA 10:3)
(Iramatorsk-Hachinery industry)

IANOV. P.K.; ANDRIANOV. S.M.; B)REZIKOV, B.S.; GOLOVKO. V.G.
[Holovko,
V.H.1; DCBROVOLISKIY, A.V. [Doborovollalkyi, A.V.~ 1; DOVGALI, M.F.
[Dovhall, M.P.]; YELIZAROV, V.D. CIElizarov, V.D.1; ZHIZIZRINSKIY,
V.H. [Zhyzdrynalkyl, V.M.3; ZVXIIIGORODSKIY. 0.M. [Zventgorodalkyt,
O.M ] ZAYCHRIKO, R.M. [Zeichanko, R.M.1; IVANENKO, Ye.l. [Ivanenko,
13.i.i; KCW, A.M.; KOSIYANOV, O.M.,--ZAKUWVwQ.I.; KOSWO, S.K.;
KLIHNIKO, T.A.; KIRIYAKOV, O.F.; KALISHUK, O.L.-, LKLICHENKO, M.T.;
LEB3DICH, M.V.- MIKRAYWV, V.0. [Yqkhailov, V.0.1; MOROZ. 1.I.;
HOSHCHIL', V.K. (Hoshchilt, V.1U.J; 11XP(3ROZHNIY, P.S. (Neporozhnii,
P S ]~ NMATNIY, S.H. [Nazdatnyt, S.M.]; NOVIKOV, V.I.; POIJWGI,
S:K: Polevoi, S.K.1; PER121UMT, H.S.; PUZIX, O.Ye. (Pazik. 0.3j;
RADIN K.S.; SLIVINSKIY, 0.1. [Slivinallgri 0.1.1; STANISIAVSKIY,
Afif t8tanielavBlkyl, A.I.1; USPENSKIL V.L Dapenalkyi. V.P.I:
KHORKHOT. O.Ya.- KHILYUK, F.P.; TSM14KO, M.P.; SHVvrS' V.I.;
HATOICHEVSKIY. V: (Mallchevalkyi, V.I, red.: ZELNNIOVA, Ye. Delen-
kova, R.1, tekhn.red.
[The Ukraine builds] Ukraine buduie. Xyiv, Derzh.vyd-vo lit-ry
z budivnytatva i arkhit., 1957. 221 p. (MIRA 11:5)
(Ukraine-Construction industry)
~~"q 0~1!'j:'
~N

Author: P. Kazakov
Title: "On the Question of Danube ?isheri,~s"
Source: Sofia, Ribno Stopanstvo, No 5, 19t---'g pp. 13-16
Description: Article covers in detail the importance of
Danube fishing as the second largest source of Bulgarian
fish supply, describes the conditions and problems encountered,
calls for measures to improve results, describes the different
tyTes of fishing, and organizational meesu-res
lb e A
vc, i=,:-rove "outer" lishing and "4=ez"
fishing (in canals, swamps, and bays). ZIn toto

KAZAKOV, P. (g.Khotikovo. Moskovskoy oblasti)
In our plant In Khotlkovo. Izobr.i ratn. no-1:7 Ja
160.
(14IFIA 13:4)
(Kbot1kovo-Blectric industrifin-Tochnological
innovationd

VIKHMAN, A., SAVELOYEV, V. (Atkhangellsk); DIGTYAREV, N.; RYABENKOV, Ta.;
WWROVSKAYA, Z. - XULAGIN, N.; GROMADCUM, A. (g. Shakhty); KW1KO,:3.
(g.z,qporozh'ye) ; - STROGANOV, 3. (Iralinirgrad); KAZAKOV, P.;
MAK&ROV, L. (Dnepropetrovsk); ABRAMOVA, V. (Grndno); MDTCHEM, V.
(Kiyev): KRASNOV. A. (g. Allmotlyevak): KAPLAN, Ta.; KASATKIR. I.
(Taroslavl').
Letters to the editors. Sov.profsoiuzy 16 no.4:44-49 F 160.
(KIRA 13:3)
1. Chlen zavkoma, predeedatell 1comisaii okhrany truda moskovskogo
zavoda "Blaktrouvot" imeni P.N. Yablochkova (for Vikhman). 2. Glov?W7
Inzhner Kuchurganskogo cherepichno-kirpichnogo zavoda, solo Sokhall-
skoye, Rozdellnyanskogo rayona, Odesskoy oblasti (for Dogtyarev).
3. Dorozhnyy komitet profeesionallnogo ooywa rabotnikov zhelezno-
dorozhnogo transporta, Sverdlovsk (for Bobrovskaya, Kulagin). 4. Novo-
trubnyy zavod, g. Pervourallsk (for Ka2akov). 5. Prodsodatell post-
royochnogo komitota .5--go stroyrayona tresta "Allmotlyevneftestroy"
(for Krasnov). 6. Predsedatell ob"yedinennogo postroykoma tresta
"Ehabarovskstroy" (for Kaplan). 7. Predsedatell tsekhovogn komite-za
otdola glavnopo tekhnologa Yaroslavskogo motornopo zavoda (for
ragatkin).
(Wficiency, Industrial) (Trade unions)
M.

KAZAKOVY P.
Introduce 'Escapon" (Ponamarev's synthetic rubber) in
industry.
NTO 4 no.12:40-43 D 162. (MRA 16:1)~
(Rubber, Synthetic)
_M7

KAZAKOV~ P.; KIIRK3TIN, N.
Gold below the slope. NTO 5 ro.1108-40 N 163. (MIRA 16.,11)
1. Spctsi&I'nyya korrespundenty zhurtiftla
"Nauchno-taklinicheakiye
obehohestva SSSRII.

KAZAKOV, P.G.
Device for punching holes in stone walls. ILqts. i izobr.
predl. v stroi.
no.56:7-9 153. (Boring machinery) WaA 9:7)

KAZAKOV, Peter, ing. (Banja Luka)
Production of laminates and plywood. Kom ind 10
no.12:477-435
D 161.
1. Institut za homijaku preradu drveta,, Banjo,
Luka.

KAZAKOV. Patr Gordeyevich; MMCHANOV, H.P.p red,; MKIIOVA, N.11,l
takhn,red.
[Parallel projections and methods for solving construction
problems; teachers' monuall ParallelInye proaktgii i metody
resbeniin konstruktivnykh sadach; posobie dlia uchitelei. Moskva.
Gos.uchobno-pedat-.og.izd-vo H-va proav.RSFSR, 1960. n4 p.
(H nU 14; 2)
(Geometrical drawing)

*-A 1-1-L-W U. A. a. K
% ttm
Ar I "Ptst
_ ,I
ALI 0!
e-0 4- 0
0 of a a OF ap
Igo AN01 dim Copipt
*oil Replacing alumInum vulfst* and the
with Chrmw. P. M Kax*k V mtv=4-,_~
00
Wave pto".
1439. No. 10, 115--l'be iuc1PeW6vr lvt0d%lc
wo.te prodmct Of NaoCrA Production trosn Cr ore)
is rrcommen&A for oir proilucilou of A1(ArO)j, which
f: is umd In the "Iskuld. til vulerpoof Sextalai. Chfuntal
contains 12-13%01 AAA.
UOU of chrontal Into AIWO), Is described.
0
&I11-ILA AST-LIWKICAL LITtRAILON CLASUPKAT"
-1 no a -1. 0 1 #as, .1. Q.. cot
,
u
0
.
~60 0 0 0 Cs e 9 0 0 0 0 0 0 0 0 0 0 4
9.,-
6s a A 110. f di-, i _171 ia Cs. -1. 1
Y_ Is S a 4 11
we
0006 0
0 0100 0 0 0 0 0 0 a 0 0 * 0 00
so
-00
.00
lee
.00
.00
is
W&O
WOO

KAZAKOVY P. I.1.: NYister K~d Scl ((Ilsr,) -- "Aspects of
respiration .!n rchizzoplircnia
patients an~ chaik-,ep in it with activo therap ".
Kaybyrw-,v, 1~59. 2~ p? (Stalin-
gmd Stnto M-:~d Tnst), 200 copies (n T"O 16, ll,'Tll~ 110)
I

URTUPOV, Tu.S.; IVAN(YV, Yu.N.; GUSHVIL, Te.N.;
KLZAXOV, P-H-
Professor Mikhail VLmillevioh Bergievskil.
Us.-med.shur. 40
no,2:92-94 Kr-Ap 139. (HIPA 12: 11)
(LMRGIXVSXII, HIKUIL VASILINVICH, 1898-)
:4-
A

SHVETS, V.B., kand.tekhn.riauk;-K-AZAKOVj, P.P.,
inzh.
Testing soil for displacement by forcing it to
bulge out in the
field, Transp. stroi. 12 no.5:38-40 My 162. (MIRA
15:6)
(Soil mechanics)

SHVETS, V.B. (Sverdlovsk); KAZAKOV, P.P. (Sverdlovsk)
Using field methods to determine the resistance of soil
to shear.
Oan., fuad. i A-ekh. grun. 5 no.ltl5-17 163. (KRA 160)
(Soil mechanics)
U 5"'A
Nr

KAZAKOV, P.P.; FILIPPOV, A.F.
Calculating the specific beat of the electroaluminothermic
process for
the production of ferroboron. Izv. vya. ucheb. zav.i chern,
met. 8 no.7s
63-68 165. (MIRA 18s7)
1. Moskovskiy Institut stal- IL SpIsVcv,

KPLZAKOVJ, P.P.; RADILOV, S.V.
Mothod for detormining aufleepttble beads in metallurgleal slftgs.
Zav. lab. 31 no.9:1112-1113 165. (MIRA 18:10)
1. Hovolipetskiy metallurgicheakiy zavod.

KAZAKOV, P.P.; KHRYUKIN, D.Z.
Using aluminum chips in the production of
ferroboron. Stall
25 no.3:242 Mr 165. (MIRA 18:4)
1. Novolipetskiy metallurgicheskiy zavod.

KIRTUKIN, D.141: -.", fi.~Qlv ~. ~ 1.~7GINT~;Ev, lj~
aluminwin --chips instvoand (~f powler in producing
ferro-allop.
tokh.inform.
18 no.946-7 S 165. (MIRA 18?10)

SHVETS, V.B.; KAZAKOV, P.P.
Measuring the deformation area in cohesive soils; field
studies.
09n., fund. i mekh. grun. 7 no,4tlO-12 165.
(M,IRA 18?8)
~4

ZAJ

Kt~,,AKOVP P.P,; S'TAIRLIVOYTOV, Ye.T.
Develcping boron ore for ferroboron melting.
Wul.takh,--elor,
1.
inform. Gos. nauch.-iasl. ins t. nauch. i tekh.inrom.
18 no.5:4-5
Yq 165. (MIRA 18:6)

k d
-Lit n jjZjL7 Ii -7T!"
1 J.-,/ JD
ACCESSION NR; AP4045702 .1/0193/64/ODO/OD9/0008/0009
AlTHOR: TraDeudkov, P. V.; Kazakov, P. P.
TITLEs Application of boron-containing alloys
-777777~~----
SOURCE: Byulleten' tekhn1ko-ekonohdcheskqy Worrateil, no. 9j 1964s 8-9
TOPIC TAGS: alloy steel, -~!lumin4 alloys chrmium alloy, nickel
alloy, silicon
alloy, fhrrocchromeboron, B-41 ferroboral, BA2 ferroboral, BNKCh
forrosilicoboral,
boron alloy, boron addition,.ferroboron
-=RhCTi The Novollpatnkiy motallurgichoskiy zavod (Novollpetskiy
Motallurcicill
Fiwjt) makes boron-containing alloys wltl~ small addItionc of
chrorr3la-M, r.-Iclcel,
silicon, and alumintLm- The lzhevskiy m9tallw-glaheskiy kombinat
'~Izhevskiy MaLal-
J_Urgical,Gombine) and the Kuznets y metallurgicheskiy kombinat
(KLLznetskiy Mietal-
-J"ir~c4q,~pmbine) use -BAI-,.and BA21errotKtral for alloying
purposes. The latter la
also used in the MDuenergo, Lenonorgo, md Dozibasseni)rgo powor
Bystems. The
,~Klkovpki katomobile Plant), "Rostael' r.-ash,
Gorlkovskiy avtomobilIny*y zav"
and "Yrqsn 3way" uns BILMITerrosilicoboral for the inoculation of
fiaallesb1y
Y*Y A
cast lion. The best hordenability of steel iv attained with a boron
addition of
Card 1/2

L 16554-65
AMMMON NR., AR40,45702
0.0011-0-007%. The voar resiatance of pouer-aqulpmont parts
exposed to abrasion
is improved with the addition of 0.7-1.1% boron along with other
elements, par-
ticulariv nickel. The higb-temperature Arength of steal and
alloyu in improved
by the a'ddition of BZWI'~Ibr ZhBlerroboron. The hardenability,
hardness, "'d keen~-
ness of high-speed stainless steel is imrovei with the addition
of uP to 5% of
boron, as in tho mnufacturo of the EI26-~':?~'~ RPIp '~-RK5~Iand
RK10"steol. Uso of tto
now ferrochromobcron developsd in recent years will save 20,OM t
of metal annual-
ly at the Anzhero-SudzhenDkiy zavod ugollnogo mashinostroyeniya
(Anzharo-Sudzhon-
Wdy Coal Mao-hinery ?I-nt) -a-on--- Itt iz -an ed tImt in arl.ta
of the
of tho-a-ap3-ication-of-boronp~-boron--compounda.*
boron-ccintaining farroalloy-e-and
master alloys in the national econony, such application is an
yet inadequate.
ASSOCIATIONs Nonu
SUMMED: 00
ENCL 1 0)
SUB COM HM
NO REF SW: ODO
01"M I WO
Cord 2/2

KAZAKOV, P. T.
"Cysticarcosis of tho Armored Tapeworm (Taoiia Solium)
in :-Ilan." Dr Med
Sci, First l4ningrad Medical Inst, Uningrad, 1?53-
(RZ!Oiol, No 3, Oct SW
Survey of Scientific and Technical Dissertations
Defen'ded at U33R Hiqher
Educational Tr4stitutions (10)
SO: Sum. No. 481, 5 May 55
W,

KAZAKOV, It.
First rapublic conference of oemiprofesniolugi maliral
pernonnal of
the Tatar S.G.R. Zdray.Roo.Yoder. 3 no.2:48 V 159.
(MIRA 12:2)
(TATAR A.S.S.R.-PUBLIC HRAINH)
p- %
g
a

- I "--. 11~~,.~~ I -..,
, Z~, lz~ - .- -
BORISEVICII, D. (Gomel'); KAZ40Vj_S..SBresQ
Growing ranks of volunteer firemen. Fozh.de7o 7
no-11:27-28 N
161. (MIRA 14:11)
(White Russia--kire dxtination--Societies)

7 ~ -, , I
, A -,%. V , ') . A .
Kurs sfericheskoy . Astronvaii, 1940.

Vychisleniye trayektoriy tsentrov tyazhesti
art*lleriyakiRh anaryar3ov. Prik].
matem. 1 viekh., 0, (1945), 129-138.
SO: Mathomatics in the USM, 1917-1947
edited by Kurosh, G.
Marl,ushevich A. 1.
Rashevski,v, P. K.
Moscow-Lenint7ad, 10,48

I.K j
KAZI OVP S.B.; ANDIRUSKW; V.1,
Spec~--q,rraphic investigation of petrolc~um
t,,-)Ig T
1: . !
. e nenillte serbs if the Dolina fleld. Nef-tegas,
t
genf-",'. 11, , '(,.- I "A
-). 4 158--62 163
1. Llvovrkiy institut geologii I polamylill iskopty
L'k--rSSl, i Neftepromplovoye iiprhvleni)-j

th'i 'Icivo- itko,: ;knt v I lilo 'Ci". ~7:
i-or V', c :,.c
'jkrS.':. V.-. Porfirlyovy-,-a i-
c r I i ov v..

KRAYUSHKIN, V.A. [KrainBhkin, V.0.]; KAZAKOV, S.B.;
ANDRUSECHKO, V.I.
Ash from the Menij*te series in the Dolina field
containing oils.
Dop. AN URSR no.l.-102-104 164. (MIRA 1714)
1. Institut geologii goryuchikh inkopMemykh AN
11kr,")SR. Predstavleno
akade-,tikom AN 1TkrSSR V.B.Porfir'YevYm LPorfirliev,
V.B.).

0,AY1jS'1Kn1, V.A. [Yxaiushkin, V.0.]; IKAZAKOV, S.B.;
POVOOVICH, V.I.
[povkhovych, V.I.)
Trace mntals in the oils from the Menilite series of
the Borislav
undertirust. Dop. AN URSR no.3:354-358 165. (MIRA 18:3)
1. Institut geologii i geokh1mii goryuchikh
iskopayemykh AN UkrSSR.
31-

SOBKOP M.Ya., dotsent; YJLZLKOV.,
Content of macro- and microelements in
goiter-changed and
normal thyroid glands in the residents of L'vov
ProvInce.
Vrach. delo no.6024-125 J9163. (MIRA 16:9)
1. Kafedra neorganicheskoy khimii (zav. - kand.
mod. nauk,
dotsent V.P.Guoyakov) L'Yovskogo meditainakogo
instituta,
spektraltnaya laboratoriya. (zav. - S.B.Kazakov)
InsLituta
geologii i polezmikh iskopayemykh AN UkrSSR.
(LVOV PROVDCE -GOITER) MINMLIS IN THE BCDY)

KAZAXIJOV S.D,
1. - -
"~~c tion of the adrenal cortex in obesity and its relation to
theraoeutic nutrition. VOP-Pit- 17 no-3:48-55 My-je le IRA
B. (m 11:6)
1. 1z otdaleniya bolezney obmena veshchestv (zav. - prof. M.N.
Togorov) Kliniki lechabnogo pitanlya Instituto pitanlya AMN SSV,,
MOO-vo.
(DIETS, In var. die.
obesity, off. on adrenal cortex funct. (Rua))
(ADRENAL GORTRZ, in var. dis.
obesity, off. of diet ther. (Rua))
(ONSITY, therapy,
diets, off. on adrenal cortex (Rua))
a "FT's 0-:6

KAZAKOV, S.I.
Standardization of spring mechanisms. Dot. khor. Igr.
no.1!41 155. (IOAA 10: 2)
1. Konstruktor Nauchno-ineledovatellskogo Inatituta
igrushki.
(SpriW (Mechanism))
',1- 5'.

XAZAKOV, S.P.
SED-10 clamp for trimming the ears of
working dogs.
Vaterinariia 32 n9.6:62-63 Js 155. (MLRA 8:7)
(VEMINARY INSTRUMITS AND APPARATUS) (DDGS)

1. KAZAKOV, S. P.-, MARKIN, M. A.
2. TJSSR (600)
4. Nozzles
7. kiltipla-chaiael no-zle with mechauical vibratom D*5t. sellkhoz.
no. 2, 1952
9. Monthly List of Russian Accessions, Library of Congress, January
-1953. Unclassified.

Testing sprinkler apparatus and machines and caZeulating their
hydr&ulic
power. Nekh. i alsk.sellkhos. no.4:40-46 Ap ()MU 6:5)
(Sprinklers)

- -LUUM, S.P., kandidat takhnichaskikh nauk.
Practical placement of sprinkler noules. Gidr.i m@1. 5
no.4:37-44 Ap 153.
(MMA 6:5)
(Sprinkler irrigation)

KOV S . P. G a r.0 id ate )f rt-ch an ical Sciences a nd V.,
Doc-'%.or of ACy-icultural
Sciences, All-Union Sciontific 16-,seareb Distituto of
Ilydrot.cchnics w-16, 1'.ollortitia.'i
Sprinkl!n~:, as a Agans of Protection against Larly Auttum. irosts"
L2~~d Ordona 'vkokhozm-yvtvf,-nnvkh EAtik Imeni 'V'. 1,
lio 1, 1956, Pr, 30-33, 'Uncl
Pv~-
- - - - - - - - - - - -

I'A
IBAD-ZAIX, Yu.A.; XAZAXOV, S*P,
Studying hydraulic monitor jet@, Dokl,,AN Azerb.SSR 12 no.12:913-922
'56. (HLRA 10:8)
l.Inatitut energetiki Akademii nauk Aserbaydahanskoy SSR. Pred-
stavleno akademikom Akademii nauk Aserbaydthanskoy SSR Z.I.
Xhalilovyz.
Pets--Fluid dynamics)
(Oil well drilling)
Ae
"RT"'9-

SURKOV, V.D.; FXDORDV, N.Ye.; KAZAKOV, S.P.; GORBA'"OV,
A.V.
Investigating the flow of cbeene curd In pipes.
Izv.vye.ucbeb.
zav.: pishcb.tekh. no.6:88-94 '58. (MIRA 12:5)
1. Aoskovskiy tokbnologicbeakir Institut myasnoy I
molocbnoy
prorwahlennosti, Kafeara protseasov i apparatov.
Kafedra gidravlikii
gidravlicheskikh rianhin i Kafedra takhnologii noloka.
(Cheese) (Fluid dynamics)

GORBATCrV, A.Y.; UZAKOV, S.P.
Investigating some physicomeohanical properties of
ground meat.
l5wrys.uchebaiv.; pishch.tokho no.5:117-125 159.
(MIRA 13:4)
1. Moskovskiy tekhnologioheskiy institut myasnoy i
molochnoy pro-
myshlennosti, kafedra protsessov i apparatov
pishchevy-kh proiz-
vodstv.
(meat)
T,

FM)OROV, N. Te.; GORBATOV, A.V.; -KAZAKOV, S.P.;
ROGOV, I.A.
Criterion equations of the flov of viscoplastic meAt
products in
transportation tubes. lzv.vye.ucheb.zav.; pishch.tekh.
no.l:.
117-121 160. (MIRA 13'6)
1. Kafedra protsesoov i apparatov pishchpvykh
proizvodatv
Mookovskogo tekhnologicheakogo instituta mrannov I
molochnoy
promyshlennosti.
(Meat) (Hvdrodynamice)

YAZAYOV, S.F., dotsent
Driving tunnels under the Ice in Oreenland. 17v. vys. ucheb.
zav.;
gor. zbur. no.11:43-46 161. (MIRA 25-1)
(Greenland--'runneling)

UZAROV. S p , V G,
Participation c..' the Ilydropbysic-al Institute of
the Academy of '
Scierces of thp Uf,S S It, in the scientific
conference on measure--
.cnt mothodr and apparatus for hydraulic research
held in Kiev,
Trudy 1.',I;1 '23!167-171 161. 0-11IRA 14:11)
(Hydraulics)
(Waves)

913EAGARDT, S.S., dots.; KAZAK2YjL.~;-F-,,ciO`ts-;
PISAJiEVA, assist..;
BESKIN, jff'.pr4o'd.
(Collection of Iroblems on the strength of
materials for the
Independent work of students) 31x)rn1k zadanii po
soprotivle-
niiu materialov dlia anvostointellnoi raboty
studentov.
,..LRA 18:4)
Sverdlovsk, 1962. 144 p. (%'T
1. Sverdlovsk. Go M y institut.

GUSF.Vx A.M., doktor fiz.-matem.nauk) otv.red'j
KAZAKOV) S.P ., kand.
takhmnauko red.; BOVCHXOVSYAYAj T.V.,,
kund.fi7.-mntoIr,nauk.. rfd.;
YUMINL) N.K., red.; FELIMIUM-11, A.I., md.izd-va;
M=OVA, T.P.t
tekhn.red.
[Modeling of atmospheric and bydrospl-oric phenomena]
Nedelirovanie
iavlenii v atmosfore i gidroafere; trudy. Koskva,
Izd-%,o kkai.nauk
SSSR, 1962. 183 p. ~MIIEA 16.1)
1. 14ozhvedomstvemVa konferentsiya. lst,, 1960. 2.
Institut
prikladnay geofiziki A14 SSSR (for Gusevq
Bonchkovskaya).
(Meteorological research) (lVdrology.- -Research)