SCIENTIFIC ABSTRACT KUZNETSOV, B. A. - KUZNETSOV, B. F.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000928120001-8
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: June 20, 2000
• Sequence Number: 1
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT


mtWY of "tigas lu $11'rer chloride.
no.3;1034-1044 1(j, 156. Zhw-t6kh-f1z. 26
(Silver Chloride) (Deforx&tjong (Xechanice)) (KESA 9:8)
~j -k;,-i 3.4
Crtagory : USSR/Solid State Fhysies - 11ochmical Froportios of E-9
Crystals ani Folycrystallino Corpounds
Abs Jour : Rof Zhur - Fizil7a, No 3, 1957, No 6779
Author : f(uznotsov, B.A.
Title : StRy of-Streasos in Silvor Chloride Crystals During Elesto-
Flastic Bending.
Orig Fub : Zh, tokhn. fiziki, 19563, 26, 1,!o 7, 1611-1621
Abstract : Coexse-gkcin plates of silver chloride I inr. thick rnd 7 --
7.5 rr. kido were bant by application cf a force lying in the
plane of the plate. Ey detomining the optical path dif-
fcronco at the points locrtod on the transverse-soction line
of the specimen, the distribution of stresses vicro studied
Alonu- this line. Upon trrnoition to the plnrtic region In
wooth nrocl.;-.ann, the stresses on the edges become less thm
In the sbetions located closer to the neutral axis. In
grooved npecirnens the incroaso in tho degree of plastic do-
fori2rtion cmison Pn increase in the ntrouses at the apex of
the groove. The presonev of a groovc Increceas strongly
the yield point of the crystal in banding.
Card 1/1
V, [1),
V A

SOV/137-58-11-23399
Recrystallization of Cold- rolled Steel Under Rapid Induction Heating
resulting from the various degrees of solubility of C in ferrite at different tempera-
tures . High plastic characteristics were attained by heat treatment of the metal at
temperatures ranging from 690 to 7100C. the duration of the entire cycle being
0.5-1 second.
A.V.
Card 2/2

-Irn"T owl A "x-I--v"---..,.
M fill ."W
Polarization mthod of investigating small plastic deformations.
Zav. IAb. 23 no.5:610-611 137. (MM 10:8)
I, Yauchno-leeledovatel'skiy instItut. tokor vysokoy chastoty
IMBI T.P. volosdiuss
(Deformations (Mechanics)) (Polarixation (Light))

.j4T.;WSDV. B.A.
Rearystallization of low-carbon steel during quick induction
heating. Metalloved i obr. met. n0-2:28-35 7 158.(MIRA 11:2)
(Steel--Heat treatment)
. (Solidification)

AUTHOR: Kuznetsov, B.A. 129-2-6/11
TITLE: Recrystallisation of Low Carbon Steel in the Case of
Rapid Induction Heating (Rekristallizatsiya malouglerod-
istoy stali pri bystrom induktsionnom nagreve)
PERIODICAL: Metallovedeniye i Obtabotka Metallov, 1958, No.2,
pp. 28 - 35 (USSR).
ABSTRACT: The processes taking place during heating of work-
hardened metal have been studied in adequate detail. However,
most of the obtained data relate to experiments in which the
material was kept at the annealing temperature for a relatively
long time and the heating speed to the given temperature was
not taken into consideration. Investigation of the influence
of the heating speed on the recrystallisation process of
certain non-ferrous materials was carried out by M. Spevak
(Ref.1) who heated the specimens rapidly by means of passage
of an electric current; he arrived at the conclusion that the
grain size after primary recrystallisation was strongly
dependent on the heating speed. This is attributed to the
fact that,with increasing temperature,-'V-he speed of formation of
crystallisation centres increases faster than the speed of
growth of the grains and therefore, the primary recrystallisation
Cardl/5 structure will be finer in the case of rapid than in the case

129-2-6/11
RecrystalliBation of Low Carbon Steel in the Case of Rapid
I.nduction Heating.
of slow heating. Yu.M. Bogatyre;v and S.M. Gamazkov (Ref. 2)
published data on the recrystallisation annealing of the
steels 10 and lXl8E9T in the case of rapid heating by means
of electric current. For the steel 10, satisfactory ductili8y
properties were obtained on heating for 1 see to 800 to 850 01
followed by cooling in air; the results were much less fav-
ourable if the cooling was effected by quenching-i:n hot-water.
The authors (Ref.2) did not study the influence df rapid
heating and accelerated cooling on the process of ageing of
the steel. The investigations carried out by the author of
this paper aimed at elucidating the features of the re-
crystallisation process of the steel 08 in the case of rapid
induction heatinz and also of establishing the influence of
various factors--(heating speed, heating temperature, cooling
speed) on the properties of annealed steel.. The specimens
consisted of 0.5 mm. thick cold-rolled sheet (with a reduction
of 80%) with the following composition: 0.12% C, 0.31% Mn,
0.028% S, 0.012% P and traces Si. Induction heating was
effected by mean of a loop inductor with an iron core,
Card2/5 permitting . - -, .- uniform heating o ,f an area of 30X150 mm.

129-2-6/11
Recrystallisation of Low Carbon Steel in the Case of Rapid
Induction Heating.
The inductor was fed from an 8 000 c.p.s. rotary generator.
The heatingotemperature of the specimens was varied between
600 to 900 C and the heating time varied betweenO105 and
10 see. The cooling was effected in water at 15 C, in air
and in air for 6 to 12 sec followed by quenching in water;
a part of the specimens were heated in the furnace for 10 min.
The processes taking place during heating of the work-hardened
steel were studied on the basis of data of metallographic and
X-ray structural analysis, hardness and microhardness tests
and also tensile and stamping tests. Fig. 1 shows the depen-
dence of the temperature of the beginning and the end of re-
crystallisation on the heating speed and it can be seen that,
with increasing heating speed, the temperature of the begin-
ing and the end of the primary recrystallisation increases
and this increase slows down in the range of elevated tempera-
tures. It can be seen from Fig. 2 that the grain size
increases only slightl with increasing temperature during
rapid heating (Curve 15. The changes in the structure of
the steel during rapid induction heating can be gauged from
the microphotographs reproduced in rig. 3. Hardness tests
Uard 3/5

129-2-6/11
Recrystallisation of Low Carbon Steel in the Case of Rapid
Induction Heating.
have shown that for obtaining good ductility properties
after induction heat treatment, the heating temperature should
be sufficiently high and the cooling speed relatively low.
The mechanical properties of recrystallised steel strip after
various heat treatment regimes are entered in Table 1. The 0
change in the mechanical properties of strip heated to 880 C
with a heating time of 2.5 see as a function of time for
durations of up to 14 days are"entered in Table 2. it was
found that after short-duration heating, the change in the
hardness as a function of time depends not only on the heating
temperature and the method of cooling, but also on the heating
speed (see Fig.4); comparison of the individual graphs re-
produced in Fig. 4 leads to the conclusion that the change
in the properties of steel as a function of time is influenced
by the removal of the residual~type II distortions and dis-
persion hardening and an increase or aecrease in hardness will
take place, depending on which of these two processes is pre-
dominant in the given time interval. Investigation of the
hardness of specimens subjected to various heating and cooling
Uard4/5 regimes indicate that there is a relation between'the changes

129-2-6/11
-Recrystallisation of Low Carbon Steel in the Case of Rapid
.Lnduction Heating.
in the ductility properties of recrystallised steel, caused by
changing over from one regime to another, bitd,the changes
in the structure and presence of type II aiijbortions. Of
great interest are theohardness values of specimenr, after
rapid heating to 650 C and cooled in water. Immediiitely
after cooling, their hardness equalled HV = 120 ; after 3
days, the hardness decreased to Hv = 110 and then remained
almost unchanged. Such a recrystallisation annealing may
prove useful for a continuous removal of the work hardening
of cold-rolled steel strip using HF heating.
There are 4 figures, 2 tables and 3 Slavic references.
AVAILABIE: Library of Congress.
Card 5/5

KOWSOV, B.A.
----------------
Using the electromagnetic method for tenting the quality of case
hardening. Stan.i instr. 29 no.12:27-29 D 158. 04IRA 11:12)
(Case hardening-Testing)
- ___ --IN

KMMSOV# B*A., lnzh. I
Determining frequency characteristics of strain gages. Ugoll Ukr. 3
no.1105 N 159. (Strain gages) (MIn 13:3)

-KMMITSOV, B.A.
Determination of residual stresses by the optical polarization ;
method. Za-*lab, 26 no.2!20&-209 16o. (MI11i 13:5)
(Strains and stresses)

KUZNETSOV, B.A.
Strai"gauge amplifier with a half-wave phaae-isensitive
detector. Avtom.i prib. no.lt92-93 Ja-Mr 162. (NMA 15:3)
1. Donetskiy politakhnichookiy institut.
(Amplifiera (Electronics))

MROZOVV P,.A.; KRASNIKOV, Yu.G.
TranBlitorized.11time delay" unt.. Avtom. I prib. no.lt43-45
ja-Mr 165. (MIRA 1M)

T;,;:, - 0 %",!% -, I'.
,
R

GOrd 112

pi

7f7

ACC NR,
AT7002103 SOURCE CODE: UR/0000/66/000/000/0164/016!i
AUTHOR:, Kuznctsov, B A
ORG: none
TITLE: Investi~,ation of initial stage of plastic deformation in polycrystalline
metals
SOURCE: Vsesoyuznaya konferentsiya po polyarizatsionno-opticheskomu matodu
issledovaniya napryazheniy. 5th, Leningrad, 1964. Polyarizatsionno-opticheskiy
metod issledovaniya napryazheniy (Polarizing-optical method of investigating-stres-
ses); trudy konferentsii. Leningrad, Izd-vo Leningr. univ., 1966, 164-169
TOPIC TAGS: crystal dislocation, plastic deformation, polycrystal, optic
measurement
ABSTRACT: By virtue of the photoelastic coating method which permits the study of
distribution of'elastoplastic deformations down to the size of individual polycrys-
"alline metal grains, the author has investigated these deformations in austenic
rust-proof steel lKhl8N9T and 'titanium. The samples measuring 2.5 x 0.5=1 and 30M
in length were polished, etched, and covered by ED6 eopzy resin 0.03--0.08rn th-ck.
The accuracy of'determination of maximum dislocations and direction of principal
deformations were 0.5 x 10-4 and 10, respectively. It was established that the
1/2

ACC NRt AT7002103
clastoplastic deformations
in different lKhl8N9T steel grains have wide magnitude
and direction'distributions. The ratio of maximum to minimum dislocation was 7-10,
and the principal deformations had directions varying in the range 25--30* (when
average sample elongation was 1.2%). In titanium, plastic deformation is maxinum at,
slip lines. Maximum value of plastic deformation shift occurs on the boundaries
of plastic regions and is of the oider of 1.7 x 10-2. Orig. art. has: 9 figures.
SUB CODE: ll/ SUBM DATE: 14Jun66
Card 2/2
A~

KUZI&'TSOV, B.A., knad.tokhri.nauk
Taking into account the thread friction in designing knitting
machine systems. Izv.vys.ucheb.zav.; tekh.leg.prom. no.6:92-98
,61. (MIRA 14:12)
1. -Xiyevakiy tekhnologicheskiy institut legkoy promyshlennosti.
Rekomendovana kafedroy mashin i apparatov.
(Knitting machines)

KUZNETSOVp B.A.p kand.takhn.nu*
Tbroading the needles of warP knitting machinOO& IzvovYvo
uchob.saveltekh.log.prom. no.2:90-98 162. (HIRA 150)
1. Kiyevokiy tokbnologioheakiy institut legkoy pramyshle=osti.
Rokomendovana. kafedroy mashin i apparatov legkoy proaphlonnosti.
L (Knitting maohines)

KUZNF,TSUVj B.A.0 kand.tekhu.nauk
of the looper system of high-speed varp knitting machines*
Izv.vyo.ucheb.zav.; tekh.log.prom. 3:105-116 16Z. (KRA 15-6)
la Kiyevskiy tekhnologicheskiy institut legkoy promyshlennosti.
Rekomendovana. kafedroy mashin i apparatov legko'y promyshlennosti.
(Knitting machines)

Se ianc.
Ma.mal
M loskva
prir&
11 nthly List of Russian Accessions, Librar7v of Congress, August 1952.
.
o UNCLASSIFIED.
.

~h

Apr
*Review of B. A. Khznetsov's Book, 'The Mammi-il a
ct Kazakhstan," L. S. Berg, Acad., PP
alt:iroda- Wo,
Notes, that 226-page book is the result of many
years of field work by the author in Kazakh tan,
and of detailed study of collections in the.
Zool Mast, Aced Sci, Leningrad, in Moscow Zool
*38 4nd.in-otber local museums. Believes initial
gBaptera on the history of Kazakhstan -1s am
57/49T67
UM/Nedicine - Literatum (Coutd) Apr 49
presented in too much detail. Disagrees with
author's aual~xls of cl-I ic cl--- s in Kazakh
higbIands.- author states this area became drier,
forest belt shrunk, certain tree types vanisbod,
etc. Nevertheless, book is considered an
outstanding achievement in the faunal geography
of Kazakhstan.
P; 57AWO

- -- --- - -
KUZNETSOV, B.A.
Ocherk zoogoograficheskogo rayonirovaniya SSS-R (Outline of the
zoogeographic Districts of the USSR) Pod. red. S. 1. Ogneva. Moskva, Izd-vo
?4Dskovskogo Obahchestva Ispytateley Prirody, 1950.
171+ p. tables (Materialy k Poznaniyu Fauny i Flory SSSR. Vyp. 20 (MV))
So: N/5
729-913
A9

KuzN3TSOV, B. A.
Tarakul Sheep
"Karakul; economic and technical information." A. S. Kantsepol I skiy. Reviewed
by B. A. Kuzneteov. Kar. i zver., 5, No- 1, 1952.
1
9. Monthly List of Russian Accessions, Library of Congress, jjinA -1952, Uncl.

The Cmdttee cm Stalin Prizes (at the Council of Ministers UEW) in the fields of
science and inventIms anmmww that the following scientific vorksp popAar acien-
tific books,, mA textbooks have been submitted for competition for Stalin Prizes for
the years 1952 and 1953* (�2yatstM Wturs, MDwmp No. 22-Wi 20 P*b - 3 Apr 1954)
Nam
Title at work
Namimted by
KUZNCSOV, B.A.
mElemente of the Study of
the Pelt and Fur*Rav
Materials Trade*
Moscow Pelt and Fur Institute
SO', W-306o4,, 7 July 19%

KMNHTSOV, B.A.
Naterials an mammals of the lithuantan S.S.R. Elul. MOM Otd.
biol- 59 no.4:7-16 il-Ag 154* (=A 7:9)
(Lithuania-Mamals) (Kamals-~-Lithuanla)

-XW="Vv,,Bovix-AlekwassdPvwioh, professor dohor biologicheskikh nauk;
KRITWIN, B.L. rectaktor; GOLUBKOTA, L.A., tekhnicheskiy redaktor
[Karakul and broadtall (fundamentals of the trade)] Xaraicall L
smushics; oanovy toyarovedeniia. Moskva. Isd-vo takhn. i adon. lit-ry
Po voprosam sagotovok, 1955. 302 P. (HLRA 9M)
(Yur)

KUZNHTSOV. Boris Aleksandrovigh; OGNIV, S.I., red.
.
(Animals of Kirghisial Zvari Kirgisii. Pod red. 8.1.0basyse
Moskva, 1958* (MIRA lls4)
(Kirghizistan-Zoolou)

ZUBIN, A.M., kand.biolog.naukt--XVP,=40y*,..B#-4.. prof. 9 doktor biolog.
nauk; KGWOT. A.M.. kand. eel I skokhoz.nauk; PURIM, Ta.A., knnd.
takhn.nauk; CHATSXIT, P.I., kond.takhn.nauk; SEMOMA, T.A.,
kand.takhn.nauk; BARYKIN, A.M., kand.tekhn.nauk; LOSWA, N.L,,
kand,takhn,nauk [deceased]; RUKYAUTS3V, M.Z., starshiy nauobVy
sotrudnik (deceased1l LAPIDUS, L.Q., starshly nauchnyy sotradulk;
FRUM19 Te.B.. kand.tekhn.nauk: KHMINITSKATA, Te.G., mladshiy
nauchayy sotrudnik; KATAYEV, V.P., kand.okonom.nauk; XLYAGINA, H.I.,
red.; HAVY.VOV. S.F.. red.; HINAUVA, T.M., red.; PIMANNIKOV,
H.Hap red.; XNAKNIN, H.Tep tekhnereds
(manual on fur and sheep pelt garment manufacture] Spravochnik po
makhovoi I ovehinno-shubnoi promyshlennoisti. Vol.2ARaw materials.
Semifinished and final products. Production technolopff] Syr1e.
Polufabrikaty i isdsliia. Tekhnologiia proizvodatva. 1959. 631 P.
(KIRA 13:3)
1. Nauchno-issledovatellskiy institut mekhovoy prowyablennosti
(NIDW) (for RuWantsov, Lapidus).
(Rides and skins) (Fur-Handbooka, manuals, etc.)

KAPLIM, Aloksey Alekseyevich;MWETSOV, B.A.. prof., red.; MKAGRKGTA,
G.G., red.izd-va-, PAVWVSKIYO"-A-'.'A*--,,-'- telft, red.
(Soviet furs] Pushnina SSBR. Hoakva. VneshtorOsdate 1960.
451f p. (MMA 13:5)
Opur) I
I
I

ILUMTSOV# B.A. , prof.
Reconstruction and enrichment of the fauna of the Soviet Uniow
Blol. v shkole no*3t68-76 3-0 160. (MIU 1111)
1. Mookovskaya mallskokhozyaystvannaya akademiye, imeni K.A.Timl-
r7axevaq
(Wildlife, Conservation of)

KUZNETSCV* B&A& doktor biologicheskikb nauk; FOLOWEVA, V.S.,
nauchnyy sotrudnik
Commercial properties of processed and dyed pelts of black pure-
bred karakul* Nauch.-isal.trudy NIDT no.10:11-24 160
(KERA 14:4)
(Karakul sheep)

KUZNETSOV., B,A., profp
FUr ;Cmdnc; in our country. Biol. v ohko2e no.6:66-73
(IqRL 14111)
L 14ookovokaya sellokollozyaystvamaya akademiya imeni
K*A* Timiryazeva,
(Fur farming)

KAPLIN, Aleloey Alakseyevich; KUMN~ZTS -~, profop red.;
YERMACHKOVAY G*S,p reZizd-va; TSAGURITAp G.M.0 tekhni
red.
[Soviet furs] Sovatskaia pushnina, Moskvap Vneshtorgizdats
1962. 509 p. (Fur industry) (MIRA 15:4)

KUZUETSOVO B.A., doktor biolog.naukj FOLOWYFVA, V.S., "shiy nauchM
65tftiahik
Comercial oh)traoteriatice of dressed and dyed skins of joal karakul
and astrakhan lamb. Nauch.isal.trudy kIMP no.11:51-70 162.
(KmA 16:5)
(Fur-Grading)

XTMMTSftV.-Wjjj j1jjj"djWjgQ doktor biol. aauko prot.; GAMVOY,
. . ................. .............
GVgOn27 Vasill-YOvich, kands aellkhox. nauk; FXbd9OvA, N.J.,
red.j GOLMOVA,' Lk, tekhn. red.
(Jisather raw materials; fundamentals of the commercial stmb,
of materials, evaluation of quality, and primary processing]
Kozhevennoe syr1e; oanovy tovarovedenila, otsenka kachestva
i pervichn.aia obrabotka. Moskva, Zagotizdat, 1963. 241 p.
(MIRA 16:9)
(Hides and skins) (Leather industry)

KUZNETSOVj_~.A.,,doktor biolo~. nauk, prof.
Pat accumulation In the body of mammals as related to the
ecology of animals, Izv. TSKRA no.6:120-125 162.
(MIRA .16 t 6)
(Pat) (Mammals) (Zoology-Zcology)

-0274E,TSOV, Bo.ris Aleksamlrovich; CIIMIOV, AnatoRy Zinov'yevich;
PETROVSWA, L.P., red.; GMINA, T.D., tekhn. red.
(Zoology courool Kura zoologii. Moskva, Cos.izd-vo
I'Vashaia shkola," 1963. 357 p. (MMA 16:12)
(Zoology)

-KUZNETSO _,B.A,s-;prof., doktor biol. nauk., red.; KOZHMIKOVA, T.N..,
a ROV-S
red,
(Marmal on the purchasing of wool, peltry, fur and leather
rew materials] Spravochnik po zakupkam. sbersti, pushniny,
mekbovogo i kozhevennogo syrlia. Moskva,, 1964. 150 p.
(MIRA 17:6)

KAPLIN, Aleksey Alekneyevich; KUZNETSOV, B.A.,, red.
----------------
(Fur market of capitalist countries; fur production and
trade) Puehnol rymok kapitalisticheskikh stran; prolz-
vodr'-wo i torgovlla mokhami. Moskva, Vneshtorglzdat,
1965. 369 P. (MIPA 18:4)

f
MOM
AUTHOR: Kuznet9ov,-B.A*
ing the initial stage of 51adtic -de-fo-rm&tion-of---
"LE: concernt
poiycrystals
1 C4 and top half
!~CE: Ali SSSR. Doklady*, v.
i inseart flacing 1.). 54
-yStal' i)last
'AGS - pclycr t i (7 steel,
~c crystal', qra.Ln strucl.,ire
t s t acie c as of metall.Lc
(-0 a t i na
A
"he :1~'
N
1r,
-7
Th(
no, 1, ~i.L ck The sample was -d, s
cc-d

L 161,90-65
ACCESSION NR: AP4049128
10-4
kbSOCIATION: None
Card 2/3

~--D: 37May64
SUb -'ODE: LV211,
Card 3/3
ENCL: 00
NIR RFIF OTHER: 000
P%6,*
7V -1~7~

KUZNETSOV, B. A., kand. fiz.-matem.nauk; ZIMIN, N.V., lnzh.
Quenching of bearing rings in high-frequency induction heating.
Trudy NIITVCH no.1/2s94,-100 160. (MIRA 17:7)

KUM11"MOV, B.A.; TARASOV, V.I.
Determining the rate of unloading of a loader with a rocker-arm
bucket. Fiz.-tekh. probl. ra2rab. pol. inkop. no.5:106-114 165.
(MIRA 19:1)
1. Gornyy instituto Dnepropetrovsk.

SHIIJRMAN, Ya.P,; TSIBROV, M.A.; YUZNETSOV, B.A.
Apparatus for programmed composition. NTI no.12:55-60 165.
(MM 19:1)
. 11 .!, 4, - - - - -

L 01288-67 FWT_ (1)
ACC NR1 AT6010476 SOURCE CODE; UR/2694/64/000/138/0130/0135
AUTHOR: Siunov, N. S.; )Kuznetsov, B. A.
ORG: none
TITLE: Allowance for skin effect in cast-aluminum squirrel-cage rotors
SOURCE: Sverdlovsk. Ur l'skiy politekhrxicheskiy institut Trudy, no. 138, 1964.
Issledovaaiye elektromagnitnykh i elektromekhanicheekikh protsessov mashin
peremennogo toka (Research on electromagnetic and electromechanical processes in
a. c. machines), 130-135
TOPIC TAGS: electric motor, induction motor, skin effect
ABSTRACT: So far, the design of high- starting -torque shaped- c onducto r deep-slot
.induction motors has been based on the formulas for copper conductors. At present,
some Soviet-made motors (up to 100 kw) havc cast-alun-dnum squirrel cages. The
skin effect in aluminum -conductors -is4ess pronounced than in copper ones. - Hence, a
different slot cross-section shape is needed. The article presents formulas and
curves (plots of starting parameters vis. slot depth, starting -los a -reduction factor vs..
slot depth) for designing high- starting -torque deep-slot induction motors. Orig. art.
has: 3 figures and 24 formulas.
SUB CODE: 09 / SUBM DATE: none / ORIG REF: 003
Card 1 / 1

KL I'!,.'--; TS 07-1, B. A.
Kuznetsov, B. A. "The analytic deter:unation of the proftctivity of an oscillating
conveyor", Izvestiya Dpeprooetr. gornogo in-ta Im. Arte,,a*, Vol. U, IA-I-, P. 95-
1()L.
VIO: L4631) 16 Sept. 1953, (Letopis 'Zhurnal Inykh Statey, i.o. 2h, 1),,))

BILICHENKO, N. Ya., dotsent, kand.tekhn.nauk; KUZNETSOV,, B.A., dotsent, kand.
tekhn.naukj SHTOM4AN.9 I.G.j, d6ktbr-teIft;-nauk-------
'Resistance on the deflector drums of belt conveyers and sprocket
scraper conveyers. Vopo rude transpe no,2:123-.127 1957*
(MIRA 24:4)
1. Dnepropetrovskiy gornyy institute
(Conveying machinery-Testing)

KUZNETSOV, B.A., dotsent, kand.tekhn.nauk; VYSOCHIN, Ye. M., aspirant
Relation between,the material conveyed and the performance of
continuous-operation conveyer scales. Vop. rud. transp. no.2:153-
158 1957. (MIRA 14:4)
1. Daepropetrovskiy gornyy institut.
Cc ave ying machinery)
tales (Weighing instruments)

RENGEVICH, A.A., dotsent, kand.tekhn.naukl Zf!~~T~OV, A., doteent, kand.
' __FL _ __I
takhn.nauk; BILICHENES N. Ya., doteent, kand.f4ikhn.naukj BRAN.. I.
gornyy inzhener; KLIMOV, V.V., gornyy inzhener.
Mine dynamometer car and its apparatus. Vop, rud. transp,
no.2:183,-217 1957. (MIRA 1414)
Ye.,,
1. Dnepropetrovskiy-gornyy institut.
(Mine railroads-Testing)
(Dynamometer)

KUZNZSOV, B. A.
010106-
Readers' response to B.L. DavydovIs article 'The most
advantageous scriLper conveyor parameterew (Ugoll no-7.
1955). ugol' 32 no.4:40-41 Ap '57. (MBA 1025)
1. Dnepropetroveldy gornyy institut.
(Mining machinery)

LlkbV, V.V., kand. tekhn. nauk; ZNLHNSKIY, N.M., kand. tekhn. rmuk;
kand. tokhn. nauk.
"Ifining onginoering" by M,K. Orishin. Revlowad bjv V.T. Xullkov,
N.M. Zolenskii, B.A. Kusnotcov. Gor. zhur. n0.2:78-80 P 158.
(MIRA 1113)
1. Ihiapropetrovakiy gornyy inatitut.
(Mining onginooring)
(Griehin, M.K.)

XIMMSOV, BqA., dots, kand.tekhn.nauk.
Geometric parameters of vheel contact with rails. Rauch. dokl. v7s.
shkoly; gor. delo no.3:226-231 158. (min U-.9)
l.Predetaylena "fedroy rudnichnogo transport& Dnepropetrovskogo
gornogo instituta im. Artems.
(Mine railroads)

PMRM, D.P., kand.tekhn.nauk; KLMNWSOV B A., inzh.
Conversion of mechanical characteristics in a mine hoisting ind~ctjon
motor by neane of a saturation choke in the stator circuits Isve
%".muchebozavs; gor.zbur. no-5:64-78 ' 58. (MIRA 1211)
1. Donstakiy industriallWy Institut.
Nina hoiating-Blectric drive)
(Blectric motors, Induction)

KUZNETSOV, B.A.
Geometrical theory for inscribing the figure of a train in curved
mine railroad tracks. Nauch. trudy HGI no. 20:166-182 '58.
(MIRA 11:8)
(Mine railroads)

TASILITST. Nikolay Vasillyevich. dotsent. kand.tekhn.nauk;P0LTAK0T, N.S.,
prof.i rstsen%ent;.SHTOKKA1,,I.G., prof,, doktor tekhn.nauke
rateanzent; BAKHURIK, K.r., kand.takhn.nauk, ratsenzant;.KUZW5OT-q
B,A,-, doteent, kand.takhn.nauk, reteenzant; BILICHENKO, N,Ta.,
doteent. kand.takhn.nauk, rateanzent; RNGKTICH, A.A., doteent.
kand.takhn.nauk, rateensent; KOZLOVSKIT, S.I., dotsent, kaud.
tekhn.nauk, retsenzent-, INVNEVICH, A.V., dotsent, k9ud*tekhn.uauk,
otv.red.; GAM, T.N., rad,isd-va; SEIKLTAR, SeTaos tekhn*rade
(Transportation and storage in ore dressing and briquetting plants]
Transport i sklady na obogatitallnykh i briketnykh fabrikakh.
Moskva, Goe.nauchno-takhn.izd-vo lit-ry po gornoma delu, 1959.
341 p. (MIRA 13:2)
1. Zaveduyushchiy kafedroy rudnichnogo transporta Dnepropetrovskogo
gornogo institute, chlon-korrespondent AN USSR (for Polyakov).
2. Wedra rudnichnogo transport& Dnapropetrovskogo gornogo institu-
ta (for Shtokman, Bakharin, Kuznetzov, Bilichanko, Rengavich). 3. Xa-
fedra radnichnogo transport& Koskovskogo gornogo instituta (for Yev-
navich).
(Ore dressing) (Ore handling) (Conveying machinery)

V~' T F - ---v-
T -1 ' I
ALE:KSAHMOV, B.F., inzh.; BALYKOV, V.M., inzh.; BARANOVSKIY, ?.I., in-zh.;
BOGUTSCIY, N.V., lnzh.; BUNIKO, V.A., kand.tokhn.nauk, dotsent;
VAVILOV, V.Y., insh.; VOLOTKOVSKIY, S.A., prof., doktor tekhn.nauk;
GRIGORITEV, L.Ta., inzh.; GRIDIN, A.D., inzh.: ZARKAN, L.N., Wh.;
KOVALEV, P.F., kand.tekhn.nauk;.~~qpV,_.#,,A.,, kand.tekbn.nauk,
doteent; KUSNITSYN, G.I., inzh.; LATURN, AJ., inzh.; LEYBOV.
R.M., doktor tekhn.nauk, prof.-, LEYTHS, Z.H., in2h.; LISITSYN, A.A.,
inzh.: LOKHANIN, K.A., insh.; LTUBIMOV, B.N., inzh.; HASKOVICH,
K.S., lnzh.; MALKHASITAN, R.V.; HILOSMIN, H.M., inzh,; HITNIK,
V.B., kand.tekhn.nauk; MIKIMUV, Tu.A., inzh.; PARAMONOV, V.I.,
inzh.; RCHANOVSKIY, Tu.G., inzh.; RUBINOVICH, Te.Te., insh.;
SAMOYLYUK, N.D., kand.tekhn.nauk; SHEKHOV, V.K., inzh.; SKUDY-
RZY, A.Ye., kand.tekhn.nauk; SNAGIN, V.T., inzh.; SHAGOVSKIT,
Te.S., kand.tekhn.nauk; FETGIN, L.M., inzh.; FREHMI, B.B., insh.;
FURKAH, A.A., inzh.; KHORIN, V.N., dotsent, kand.tokhn.nauk; CHET-
VIMOV. B.M., inzh.; CIUMNIKHIN, S.I., inzh.; SHEMOVNIKOV. V.N.,
inzh.; SHIRYATSV, B.M., inzh.; SHIMMIN, N.F., kand.tekhn.nauk;
OWILIBERG, I.L., inzh.; SHORIN, Y.G., dotsent, kand.takhn.nauk;
MUONHAN, I.G., doktor tekhn.nauk; MMIS, N.A., inzh.; TOPIRM,
A.M., glavnyy red.; TOPCHITZV, A.V., otv.red.toma; LIVSHITS, I'I.'
zameatitell otv.red.; ABRAMOV, V.I., red.; LADYGIN, A.M., red.;
MOROZOV, R.N., red.; OMMNOY, H.I.. red.; SPIVAKOVSEIY, A.O.,
red.; FATBISOVICH. I.L., red.; AREHANGMISKIT, A.S., inzh., red.;
(Continued on next card)

AIJKSANDROV, B.F. ---(continued) Cm rd 2.
BELTATZV. V.S., Inzh.j red.; BUKWOVA, L.I.. inzh., red.;-VLASOV,-
V.K., insh., red.; GLADILIN, L.T., prof., doktor tekhn.nauk, red.;
GR TSOV, N.V., inzh., red.; GRECHISHKIN, P.G., inzh., red.; GOH-
CHARIVICH, I.Y., kand.tekhn.nauk, red.; OUDALOV. V.P.. kand.tekhn.
nauk, red.; IGNATOV, N.N.. inzh., red.: LOKAKIN, S.M., doteent. kand.
tekhn.nauk, red.; MMYNOV, M.V., dotsent, kand.talhn.nauk, red.;
POVOLOTSKIT, I.A., inzh., red.; SVETLICHM, P.L., inzh., red.;SAL'-
TWICH, L.A., kand.tekhn.nauk, red.; SPERANTOV, A.Y., kand.takhn.
nauk, red.; SHLIfLiM, G.A., inzh., red.; ABARBARCMZ, F.I.. red.izd-va;
PROZOROVSKAYA, V.L.. tekhn.red.; KONIRATIn"IA, M.A., tekhn.red.
[Kining; an encyclopedic handbook] Gornoe delo; entsiklopedicheskii
spravochnik. Glav.red.A.M.Terpigorev. Chleny glav.redaktaii A.I.
Baranov i dr. Moskva, Gqs.nauchno-tekhn.izd-vo lit-ry po ornomu delu.
Vol-7- (Mining machineryi Gornye mashiny. Redkol.toma A.V.qopchiev i
dr. 1959. 638 P. (Mining machinery) (KIRA 13:1)

,-~-KU4"JNETSOV) B.A.0 kand,tekhn.nauk
Traction qualities of twin-drum, electric motor stationo of a
belt conveyer with an independent drive. Vop. rud. transp.
no.3:93-107 19599 (MIRA 3-4:4)
1. Dnepropetrovskiy ornyy institut.
fConveying machinery)

KUZNETSOV, B.A., kand.tekhn.nauk
Problems in the geometry of coupling and buffer units of mine
rolling otock. Vop. rud. tranop. no.3:179-214 1959.
(MIRA 34:4)
1. Dnepropetrovskiy gornyy institut.
(Mine railroads)

KUZNE,TSOV~-B.A,-,-k - d-
-- I--- !~an .
Checking the flexure angle of the bearing rope on the swivelling
ohoes of suspenoion cableways. Vop. rud. tranap. no.3:373-375
1959. (MIRA 34:4)
1, Dnepropetrovskiy gornyy institut.
(cableways)

Apparatus for qqtermining the.effioiency of reductors. Izv.;
ucheb, za,~*; gor* zhuis noJS105~-109 160. (MIRA 14t5T*
1.,.Donetakiy industriallnyy institut Rokomendovana kafedroy gornykh
ppr?d. (BlectrIc testing-.-!-Equipment and supplies)
(Mining machines-Testing)
0

.,,,KUZUET,WVt ]3.A,j-kand-*-teMnaW
Geometric and kinemetric problems in inscribing a train at the-eross-
over sections of the tracke Vope rud, ta%up, noo4:231-243 160.
(MM 14:3)
1. Daepropetrovskiy goruyy inatitut Im. Artema.
(Mine r-tilroads)

KUZRETSOV B.A bLnd tekhn.nmk; PODOPRIGORAv A.S.; inzh.; DMIA9 A.K. v inzh.
WON A
1F.Te:, insh.
Research on the Interaction of a wheel and a rail. Vop. rud.tranap.
no.4:244-#0 160, (MIRA .14:3)
1. Daspropetrovskiy goruyy institut, im. Arte"a.
(Mine railroads)

KUZRETSOVV B.A.v k&zd.tGkhn.naukj PODOPRIGORAt A.S.j insbj BrLUt A,K,j inshe
it MAU- Immot.
He searob on the proos a s of a w heal slipping onto a r ail. Vop. rud.
transp. no.W*-299 160. OWU 140)
Is Abspropetrovskiy go inatitut im. Artem.
rTxmine milroadi

~--KUZffETSOVq BiA.jkand,tekhn,naukj POLUUNSKIY, $.A,, inzh.
~-- -1-1 - 11
Dynazion of the operating assembly of a loader with a rocker arm.
Top.rad. transp. no.4s368-378 160. (KCRA 34:3)
Ii Daspropetrovskiy gornyy institut im. Artema (for Kuszetsov). 2. In-
stitut gornogo dela AN USSR (for roluyanoldy).
(Ore handling-Equipment and supplies)

PODOPRIGORAp Mop inzh*j KMNETS2~U~., kand. tekha. nauk
Determining the reoerve otability of care to derailment. Vop.
rud. transp. no.5tI50-155 161. (MIM 16:7)
1. Dnepropetrovskiy rnyy inatitut.
~ Wne railroada)

- KUZNETSOV, B,A,v kand, tekhn. nauk
Angle of a profile of worn wbaels of mine rolling otock.
Vops rud, transpe no*5t:L56-163 161. (MMA 16:7)
1. Dnepropetrovskiy, gornyy institut.
,,Car wheele) (Mechanical wear)

MNMSOVp B.A.,v kand. tekhn. nauk; BILAN, LYO., inzh.
Resistance to notion of Individual cars on curves. Vop. rud.
transp. no.5t164-2M 161. (KIRA 16:7)
L Dnepropetrovskiy prnyy institut, (for Kuznetsov).
2. Institut gornogo dela AN UkrSSR (for Bilan).
(Mine railroads--Curveo and turnouts)

KUZNETSGVp B.A.p kand. tekhn. nauk
. ..... "Womme -
Equation of wtion of an ore train, Vope rude transpe noo5:
202-209 161. (KEU 16:7)
1. Dnepropetrovskiy gornyy institute
(Mine railroads)

POLYAKOV, N.S.; RENGEVICH, A.I., kand.takhn.nauk; XG-IIETSOV. B.A,, kand.-
tekhn.nauk; KLIMDV, V.V., inzh.; BILAN, I.Ye., inzh.
Normative data for fulfilling haulage estimates of electric mine
haulage and for designing mine rolling stock. Vop. rud. transp.
no.6tl63-180 162. (KHU 15:8)
1. Chlen-korrespondent LN UkrSSR (for Polyakov). 2. Dnepropetrovskiy
gornyy inatitut (for Rengevich, Kuznetsov). 3. Institut chernoy
metallurgii A.N-UkrSSR (for Klimov, Bilan).
(Mine railroads)

RENGEVICH, A.A.0 kand.tekhn.nauk; SHAKHTARI, F.S., inzh.; MODIKO, K.P.,
inzh,; YUSHCHENKO, A.I., inzhs; GALUSHKO, H.K., kand.tekhn.nauk;
KUZffETSGV B.A., kand.tokhn.nauk; KUDELYA, G.Ya., lnzb.;
insh.; OKHRIMCHUK, O.Kh., takhnik
Causes of the breaking of axles-of electric mine locomotives.
VOP. rud. transp. no.6tl92-203 162. IWRA 15:8)
1. Dnepropetrovskiy gornyy institut (for Rengevich., Kusnetsoi,
Kudelya, Makheda, Okhrimchuk). 2. Donetakiy nauchno-issledovatellskiy
ugof'nyy institut (for Shakhtarl, Galuahko). 3. Alek8androvskiy
mashinostroiteltnyy zavad (for VolodIko, Yushchenko).
(Mine railroads) (Axlen-Testing)

BILAN, I.Ye., insh.; kand.tekhn.nauk
Using the modeling method to determine the resistance to move-
raent of individual mine care on curves. Vop. rud. transp. no.6:
334-342 162. (MIRA 15:8)
1. Institut, chernoy metallurgii AN UkrSSR (for Bilan).
2. Dnepropetrovskiy gornyy inatitut (for Kuznetsov).
(Nine railroads)

KUMTSOV,__.P.A.,, kand.tekhn.nauk
Stability of cars on entering a curve, Vop, rud, transpo no.6.,
360-372 162. (MIRA 15t8)
1. Dnepropetrovskiy gornyy inatitut.
(Mine railroad--Cara)

PODOPRIGORA, A.S., inzh.; KUZNETSOVI_B.A., kand.tekhn.nauk
Designing inclined tail-rope haulage spurs. Vop. rud. transp.
no.6072-385 -162. OURA 15:8)
1. Dnepropetrovskiy gornyy institut.
(mine railroads)

KUZUETSOVO B.A., kand.takhn.nauk; URSHAVSKIY, A.M., inzh.
Geometric parameters of trucks for mine haulage equipment in open
pits. Vop.rud. tranap. no.6s385-409 162. (MIRA 1518)
1. Dnepropetrovskiy gornyy institut.
(Mine railroads)

KUZNETSOVF B.A., doktor tekhn.nauk
Movement of a two-axle electric locomotive around a curve while
pullIng. Vop. rud. transp. no.7sl72-182 163. (MMA 160)
1. Dneprdpetrovskiy gorny7 institut. .
(Mine railroads-Curves and turnouts)

KUZNETSOV, B.A... doktor takhn.nauk
Standards for the radii of curves for two-axle mine rolling stock,
Vop, rud, tranap. no.7s254-269 163. (MMA 160)
1. Dnepropetrovakiy gornyy inatitut.
(Mine railroads-Curves and turnouts)

POLYAKOV, N.S., doktor tekhn. nauki,,KUZUETSOV, B.A., kand. tekhn. nauk;
BILAN, I.Ye., kand. tekhn. nauk
Additional resistance of mine cars resulting from the curvature
of the track. Ugoll 38 no.108-39 Ja 163. (MIRA 180)
1. Otdelenlye gornorudnykh problem Instituta elektrotekhniki
AN UkrSSR (for Polyakov Dilan). 2. Dnepropetrovskly gornyy
institut (for KuznetBov~- 3. Chlen-korrespondent AN UkrSSR
(for Polyakov).

OXUI"V* v4st, ILA,
31- ~-'
Omajdafttim '~r OWMt dUplaamMt in n)t
=, with - out
AlW31hum C"* rll~ UV410 1,011takhe Itat. no$
LNUU9 *4 1391 -
(MT-RA .191).)

3
Morozov,'R.
soLjRCE CODE:
AUTHOR:
P ; &Ujnatsoys,,.,B!!. A.; Krasnikov, Yu. G.
ORG: none
TITLE: Time del transistor element
SOURCE*. Avtomatika I priborostroyeniyes nos 1, 1965P 43-45
TOPIC TAGS: flip flop circuits silicon diode, automatic control, transistorized
circuit
'-Transistorized control systems often require prolonged;~:
'ABSTRACT:
,,temporary signal delays~ with a time delay element being used for*
this purpose. The known time delay elements) however, have a
~number of shortcomings: low tempe;rature stability, impossibility;
4of obtaining prolonged time delays, considerable dependence of
!time delays on fluctuations of supply voltage. Therefore, the
;Ukrainlan Scientific Research Tube Institute has developed a TIME~
DELAY element free of these shortcomings. In this element the
:time delay is determined by an integrating network R, R, C whose
,output Is connected via a silicon diode to a flip-fl6p ::- the
,output element. Prolonged time delays can be achieved since the
icapaoitor discharge current is not the flip-flopts Input current,
Iso that it does not energize the flIp-flop! Instead, the flip-
'flop is energized by a special pulsed voltage generator connected
;.to, the second plate.-of -the. capacitors Thereforeq capacitance C...-,:

L 23900-66
ACC NRs AP6014963 7-
jean be made .sufficiently small Idespite high magnitudes of renis
'tance R . 'Laboratory and operating trials of the new elements
:Showed ?hats In the presenoe of,an ambient temperattire of 180C
iand fluctuations of +25% In the supply voltage the deviations of-,
.time delay did not re rose-'
eieeed +(1.0 1-5)%; when the temperatu
.~to 650c, with supply-voltage fluctuations remaining the sameq
4these deviations reached only +ji-5-2-OM Currently the new.,A.,,.",
iTIME DELAY element is sucoesafn ly operating in a contaotlestj,'.,-.-.
__~illets.ln a
isystem for the automatio oontrol.of p~eroing.,~r
Continuous tube-rol1ing'__ins'iiii"ion-.- Orig, art, has: .2 rig'ur,s`s`.___ 0.
SUB CODE: 09 SUBMDATES-.Inone'

KUZNETSOV, B.A., inzh.; MOROZOV, R.P.) inzh.; ISAWHENKO V.N., in-zh.-
All-purpose source of low voltages. Priborostroenie no-3:17-19
Mr 165. (MIRA 18:4)

~'ACCESSION NRt AP4040423' 8/0302/64/000/002AO22/0025i
il-AUTHORs Norozovs R. P.1 Savchanko, Ve N,
liTITLHi Time-delay elemenk for contactlesa transistorized control
1;! systems
SOURCEt Avtomatika I priborostroyaniyet no. 2. 1964, 22-25
TOPIC TAGS1 contactlesq control system, time delay stability, time
duration. control system time delay, time delay element
ABSTRACT: Several variants of improved tima-delay elements and their
basic circuits are described, The firqt circuit uses a transistorized
wo-stage amplifier and a diode an the output keys This circuito to-,-
Rather with other contactless logic elements, makes It possible to
achieve hiRher time delays of the control system (as compared Vith
e'lactromechanical relays) without affecting the performance of the
a yo taut Because of certain disadvantages a second highly stable tLaelft
,delay circuit was developed.(nee Fig, I of the Enclosure). It repro-
sents-ad intagmtor-suplifier with high amplification using transistors,
T2~T,5* Transistor Tj is a logical NOR circuits The amplifier
1/ 3

ACCESSSION NRt AP4040425
I(T and T with capacitive negative feedb;ck (capacitor CI) to the
3 4)
basic element ensuring time delay. According to experiments, a time
delay of 7-10 sec can be achieved with the use of this circuit at
an ambient temperature In excess of 46C* Voltage-supply fluctuations
of +30% produce an error in time delay not exceeding �0,3Z, For
ithe case where there is no requirement of high temperature stability$!
a third variant of the time-delay circuit has been developed. This t
71cLrcuLt produces time delays of 10 soce In the fourth variant do-
scribed# temperature Increaseaup to 70C produce a tLme-delay error not,
SZwhile the error caused by voltage fluctuations of �30%
,,does not exceed 3%9 OrLg. art. has: 4 figures.
A
none
~ASSOCIATIONt
SUBMITTEDI 00 ATD PRZSSt 3066 ENCU 01
NO REP SOVt 000 OTHERI 000
'ISUB CODBo Wt JX
2/3,

"CESSION NRt AP4040425
M rc
1* High-stabLlLty time-
(4.
element vLth integrator-
amplifier and voltage diagram
'0
Card 3/3
SNCLOSURES 01

K10,7=07, B. B.; GRYA711OV, A. 1.
Afforeutation
Leaders in shelterbelt forestry. Dost. sellkhoz. No. 3, 1953.
9. Monthl List of Russian Accessions, Library of Congress, June 1953, Uncl.

ALEKSZYZV, 0.1.; SVISHCHEV, V.A.; KMNZTSOV, B.D. ,
Experimentation on elaotre-hydraulic boring. Izv. AN razakh. SSR.
Ser. gor. del& n9,1:58-68 '39. (MIRA 12:9)
(Boring) (Electricity in mining)

, . ~. , --- , - E . )
"The effect of energy gaps an the spectra of channels in the fission process."
report submitted for Intl Nuclear Data, Sci Working Group Mtg, MA, Vienn ,
9-13 Nov 64.

M
ILIIH, B.P.;,~=HITSOT, B.7.
The SSM-12 mounted tweleve-row beat planter.
no.6:51-53 160.
I (Sugar beeta)
(Planters (Agricultural machinery)
Blul.tokh.-okon.inform.
(HIRA 13:1)

KMNETSOV, B.F.
The 2,qPS4 beet'planter with a sprout thinning device. Biuletekho-
okon,info=*Gooonaucho-iosloinstonaucho i telcb.informe no.4:67-69
162. - (MIRA 1517)
(Planters (Agricultural machinery))

RUZNETSOV, B.F., inzh.
Sugar beet planter with a device for thinning the sprouts. Zrakt.
i. selkhozmash. 32 no-3:34-35 Mr '62. (MIRA 15:2) 1
1. Vaesoyuznyy nauchno-issledovatel'skiy institut sel'skokho-
zyaystvennogo mashinostroyeniya.
(Planters (Agricultural machinery)) (Beets, Sugar)

AIX&SANDROV, V.I.$ inzh.; KUMMOV, B.F., inzh.
Types of tractor-mounted vegetable and sugar beet plantoro, Trakt, i
sellkhozmash. 32 noil2-.28-30 D 162. (MIRA 1633)
1* Voesoyuznyy nauchno-issledovatellakly institut sel'skokhozya:yvtY9nnogo
mashinostroyeniya. -
(Planters (AgricWtural machinery)) (Vegetable gardening)
(Sugar boots)