SCIENTIFIC ABSTRACT KOTOV, A.I. - KOTOV, G.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000825410014-6
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: August 23, 2000
• Sequence Number: 14
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

.,-KOIQV4 Anatoliy Ivanovicht kand. sellkhoz. nauk; TITqV# V.I.9 red.;
-fO-KIDIK0-9-A-,-,-.P ra-,,- VIDONYAKI A.F.9 tekhn. red.
[Principles and particular aspects of forest management] Ob
osnovakh lesoustroistva i ego oi3obennostiakh. Kiev, Izd-vo
Ukr. Akad. sellkhoz. nauk, 1961. 3-18 p, (KIRA 140)
(Forost mnnagement)

ONOFRIYENKO, V.P., kand.tekhn.nauk; LEBEDEV, A.Ye., kand.tekhn.nauk;
SOLDATKIN, A.I., kand.tekhn.nauk; LOZOVOY, P.R., inzh.; PETRUKHIN,
B.A., lnzh.; ARBUZOV, V.A., inzh.; Prinimah uchastiye: FURYAN,
D.M.1 KONOPLYA, M.V.; KOTIOV, A.I.
Pilot-plant production of sinter with a basicity of 1.12 from
Kerch ore concentrates. Biul. TSIICHM no.10:17-22 '60.
(MIRA 15:4)
1. Ukrainskiy institut metallov (for lurman, Konoplya). 2. Kamyshbu-
runsk kombinat (for Kotov).
(rintering) (Kerch Peninsula--Iron ores)

KOTOV, A.I.; GRINTSER, L.I.
Possibility for using penicillin production wastes as ferments.
Spirt. prom. 29 no.6:14-18 163. (MRA 16tio)
1. Saranskiy zavod meditsinskikh preparatov.
(Penicillin) (Fermentation)

.K-QMv,--A.I., kand. tekhn. nauk, dotsent; WNW&ENKO, N.F., kand. tekhn.
rttLuk
Interaction of piles with the earth during the cathodic
protection of the system. Trudy LIVT no.47:34-40 163.
MRA 17r9)
KOTOV, A. I ttARESICEY, I. A.
"Microelet.-.ent Content in F(,-)od" - p. 46
Vo.venno Meditsinskiy Zhurnal, No. 1.0, 1962

KOT07 A,;,, podpol-kovnik meditsinskoy sluzhby; TALAN, f
, S
VOLMTS, M,T,
Content of vitamin C in soldiers' rations. Voer,.-zed. zhur.
no.303-55 165. (MIVA 18 -13 )

tekhn. nauk, dotsent; BONDARENKO, N.F., kand. tekhn.
nauk; nERPIN, S.V., doktor tekhn. nauk, prof.
Studying the stability of lateral resistance of a pile in electri-
cally stabilized soil. Trudy LIVT no.66:49-56 164. (RM 19:2)
1

KOTOV, A. L.
. .................,
Water econonq of oome plante in the Tiksi Bay region. Nauch.
dokl.vys.shkoly; biol.naW, d no.1:162-167 159. (MIRA 12:5)
1. Rekomendovana kafedroy fi;iologii rasteniy Moskovakogo
gosudarstvennogo universiteta im. H.V.Lomonosova.
(TIKSI BAY REGION-PUNTS-TRANSPIRATION)

VIDIUMIN3 S.M.; DUDIKOVA, E.D,; KOTOV,,,.A,.Ma -.,
Synthesis and study of polyarganostannanes. Zhur.ob.1-Ilim. 33
no.10:3274,--3277 0 163. OKMA i6m)

1-7
PHASE I BOOK UPWITATION 3OV/5457
Nauchno-tekhnicheakoye obahchestvo mashinottroltallnoy promyshlon-
Y108ti. 30ktZLYR totAllovedenlya I tormicheskoy obrabotkl =atal-
lov.
Xatailovaderifyo I termIchaskaya obrabotka ndtall'OV; trudy Sektal-i
metallovedonlya I termicheskoy cbrabotkI matallov (Physical
Metallurgy 6nd Heat Treatment of Metals; Transactions of the
Section of Physical metallurgy and Heat Treatment of Metals)
no. 2.14oacow, KmahSiz, 1960. 242 p. 6.000 copies printed.
Sponsoring Agencys Nnuohno-tekhnichaskoye ob2hoheatvo
nashinostroltalln-V pronyahlannoati. Tsentral-noya pravlenva.

Editorial Board; 0. 1. Pogodin-Aleksoyav, 7~u. A. (3aller, A. 0.
Rakhahtadt, and 0. K. Shroyber, Ed. of Publishing Houses 1. 1.
Lesnichenkoj Tech. Ed.: B. 1. Model I; MAnaging Ed. for Liters-
turn on Metalworking and Machina-Tool Y:alcingi V. 1. MItin.
PUPPOS21 This collection of articles Is Intended for metallurgists ,
mechanical, engineer&# and scientific research workers.
C43YERAas: IiWeolleotion contains articles describing recultz
of.recoarch conducted by members or rmo (Scientific Technical
Society) or the x3ohirso-building inlustr7 In the field of
physical metallurgy, and In the heat treatment of steel, cast
Iron,and nonferrous metals and alloys. We personalities are
mentioned. moot or extIcles are acac=9anled by Soviet and non.
Soviet rarereneas and contain conal,islons drawn from Investl.
gatlans.

TABIZ a C02MMMI
blanter, R. TO---' Doctor of Technical ScIencess Professor, and
L. 1. Xurnetsov and L. A. Matashop, rnglnearv. Softening and
Reorystallization Processes In Iron and Minkel Alloys
Trunin, 1. 1.. Engineer. Zffeat of Cold-WorkIng Conditions an
the Vindurance, or steel 12
Barnsht!y_n, 9. L., Candidate of Technical Sciences, and L. V.
Yo -k f
k
a
rxineer, N fact of Cold Working on the Structure
Z
1y
a
rt of the VT2 Titanlun Alloy 18
,.
,
an
g,
Kldlo, 1, .. Doctor of Technical Sciences, Professor. On the
Reasons for the ImDrovemant of Iron-Alloy Properties After High-
J~qquancy Qlanch Hardening 25
Doctor of Physic" and Mathem tic$, Professor.
-
:
r the Sigma-Phase Fration in All
ys 39
Conditions f6
Za"arovaa X. 1. Structural Transformations In Highly Coercl4t
Alloys 52
ft&odln-Aleka~yev_Q,_I., Doctor of Technical Sciences, Profasaar,.W
Candidate or Technical 3 , one an Idecassed].
UNot of the Klarostructure on the Davalop:xant of Reversible
Taciper-DrIttleness In Low-Carbon Manganese Steel 59
po8ceL,,&-Aj*k5&7sva~ X. M., Candidate or Technical Sciences, Docent.
jffjot-'jjf-3cYsa Xcitalldrecal Factors on Strain Aging of Construc-
tional Carbon Steel 67
Doctor or Technical Sciences, Professor, and E. 1.
XjMypk.U, Engineer. lxx4L3n:ng the ftheating T=perature In Forging

Physical Metallurgy and Heat Treatment (Cont.) SCV/5457 17
Cpnstructional Alloy Stools 84
T-khtin YU )J.p Doctor of Technical Sciences, Professor, and
F~Willdna, Engineer.- 'Gas Boronizing or Steel 92
4Lnl ~evioh. ~_B Candidate or Technical Sciences .4 A H
_jpoy, trigincer. Ther=chemloal Treatment or Cc ;.!n 33
;;'_~crqasing Their SLtrrace Hardness and Scale Resistance io6
X-Odzov, D. M.. Candidate of Technical Sciences. --is Porma-
ta-on_o_r-C"r_&_a'Zi During the 4tanoh Hardening or Steel and Their
Prevention Ila
W;ht.dt. A. G., Candidate of Technical Sciences, Docent, and
rt.
-&-cer. Tranaroruation, ?rope les, and
TT4V=a_nE-of_-]VIIoys of the Cu-41-Mn System Used for Springs I"
Xalinklna, Ye. I., Candidate or Tchninal Sclances. Determl-
nation- lot-evwrat%onal Properties of Tool Steel* and AllArls 16o
culy%_tv ~Al.* Dootor of Technical Sciences, Professor, S. L
hor,
Rustc= an to of Technical Sciences, Do ent. G-ff. Ore._
andi:~'P. Al.kay"v . Engi ... M. New Stools for via
Roat-94-Ars-f-Afit-11YO-y-h IT9
Geller, Yu. A., Dooicr of Technical Sciences, Professor, To. JPL ad
V. N.-LemakIno Engineer. Hardenabillty or L1107
197
Candidate or Technical Sciences, and K. Z. Shasnir-skov-
Transformers for High-Prequency
4p.bLations 220
Z,jjqv. Effect of
PoCedln-Aleksoyev. G. I., and V. V. Zaboleyev-
Ultrasonics on the structurv-pammro-n-Procasnes in natal Allcy~s 229
AvAnA= s Library or Conzroas (TH6T2-K34)

AKSBNOV, Yevgeniy Afanas Ivevich, inzh.: XOTOV, AlekBe7 Sikolayevicb, inzh.
Alliance betweea figures and electrons controls a cutting
macbines, IUn.tekh. 4 no.2:24-26 F 160.
(RM 13:6)
(Killing macbines--Numerical control)

KENKEVICH, A.N., kand.tekhaenauk.;,KOTOV, A.N.v imb.
Thermochemical treatwnt of copper and brass for an Increase In
surface hardness and scale resistance, Trudy Sek.metalloved.i teme
obr,met,NTO mash.pron, no.2:106-3-17 160. (MIM 14:10
(Diffusion coating) (Copper-Corrosion)
(Surface hardening)

RYZHOV, N.M.; KOTOVI A.N.; RAKBSH=l A.G.
Resonance apparatus for fatigue testing of sheet materials at
various temperatures. Zav. lab. 30 no.6051-752 164
(MIRA 17:8)
1. Roskovskoye vyssheye tekhnicheskoye uchilishche imeni
Baumana.

BOLISHIKH, A.S.; KOTOV, A.N.
The EDV-8 electrodynamic oscillator. Priborostroenie no.9:30 S '64.
(?,fIW,L 17: 11)

ANDREYEV) Pavel Alekseyevich; STILUMOVICHp K.I.., prof.) retsenzent;
KOTOV, A.P., kand. tekhn. naukp retsonzent; TYRYSIMUI, V.G.p
`~auc iVy7rFJea_._; VASILOYEVA, red.; TSAL, R.K., tekbn. red.
(Potary scrow compressors) Vintovye kompreasoMe mashiny.
Leningrai, Gos. soiu%noe izd-vo sudostroit. promyshl., 1961#
250 P. (Compressors-Design and constniction) MIRA 150)

BYALYY, L.A.; SHUR, A.B.; Prinimali Uchastiye.- KCr1QV,--A.P.;
RUSAKOV, P.G.; YEGOROV, N.D.; KOSMOV, V.A.; RYMIOV, N.F,
Investigating the time length for the flow of gases thrmlgh
powerful blast furnaces. Stall 24 no.1:14-17 Ja 164,~
(MIRA l7t2)
1. Leningradskiy politekhrAcheskiy institut i GherepowtskLy
metzMw-~Kicheskiy zavod,

NOTOVI A.P._-,_
Medical Expert Commission for the Evaluation of Work Capacity for
Invalids in Ccal Mining. Ortop. travm. i proton.. 21 no. 10146#40
160,, (MIRA 14:1)
(GOAL MINERS-DISEASES AND HYGIENE) (DISABILITY EVALUATION)

KOTOVI A.P.
Orthopedic corseta. Kiev, Cos. med. izd-vo USSR, 1947. 34 p. (Biblioteka praktichaskogo
vrachn)
1. Corsets. 2. Orthopedic apparatus.

KOTOVP A. P.
Kotov,, A. P. - "On the history of Soviet prostheses. Thirty years of prosthesis in
the Ukraine (1917 through 1947)," Uchen. zapiski (Ukre nauch.-issled. in-t
protezirovaniya)# Issue 1. 19489 P. 3-20p - Bibliog: V itemn
SO: U-4355,, 14 August 53, (Letopis 'Zhurnal Inykh Statey, No. 15, 1949)

KOTOV A. P.
Kot-ov, A. P. - "On the training method of hip stumps," (A new type of training
prosthesis), Uchen. zapiski (Ukr. nauch.-isoled. in-t protezirovaaiya)p Issue 1,
1948, p. 21-30
SOz U-4355, 14 August 53, (Letopi3 U-7hurnal 'nykh Stateyp Noe 15, 1949)
XOTOVI A.
Kotovj A* P, and Zinoviyev, M. Ve - "YAm1facture of medical prostheses and apparatusaq
with the application of waterproof cafiein glue," Uchen. zapiski (Ukr. nauch.-Isgl~d.
In-t protezir.ovani*s, Issue 1. 1948v p. 99-104
SO: U-4355, 14 August 53, (Letopis tlbtrnai Inyl..Ii sti~ey, 1,49)

KOTOV, A.P.. direktor- ,DOBRIN, Yu.G.
-
Management of convalescing patients following amputation. Sov.Lqed. 17 no.7:
42-44 JI 151. (Kta& 6:8)
7
I. Urrainnkly nanchno-isnieaovatellskly inatitut protezirovLnlya.
(Ak-.T
,,mtation)

MTOT, A.P.,_.professor.
w8WAM11e"-1:- hll~ -
Levels and methods of antputatIon In spontaneous gangrene. Ortop.
trav1m.protaz.,Hosk-va no-1:33-37 &-F 155. (MLELA 8: 10)
1. Iz Ukrainskogo nauchno-issladovatellakogo institute. prote-
sirovaniya (dir.-prof. A.P. Kotov)
(LNG. gangrene-,
spontaneous, amputation. level & methodlo
(GOGRM,
leg, spontaneous, amputation..Ievel & method)
(AMPUTNT101f. in various diseases,
leg, gangrene. spontaneous. level & method)

Clinical and functional peculiarities of thigh stumps and thbir
significance in the application of prostheses. Ortop., travm.
protez. 17 no-5:8-12 S-0 156. (HLPI 10:1)
1. Iz Ukrainekogo nauchno-tooledovateltakogo institute protectrovaniya
(dir. drof,. A&B.1atov)
AMPUTATION STUMPS
hip. role of clin. & funct. characteristics in application
of prosthesis femur, peculiarities & relation to wearing
of prosthesis)
(Yxm
amputation stump, peculiarities & relation to waring of
prosthesis)

KOTOV, A.P., professor; BOGDANOV. A.R.; GOLIM!iBYARG. Ye.H.
-, 1---_-,
Determining the length of pro3theeis following amputations of the
log at various levels. Ortope, travm. protez. 17 no-5:66-67 S-0 '56.
(MLRA 10:1)
L. 1z Ukrainpkogo riauchno-lealedovatellskogo Instituta protezirova-
niya, (1ir. - prof. A.P.Kotov)
(AMPUTATIONS OF LEG) (ARTIFICIAL L1103)

EXCERPTA MIDICA See 1~ Vol 5/3 PublIc Health Far 59
939. TlIF WAYS OF IMPROVEMENT OF THE WORK OF IINDUSTRIAL MEDIC-
AL 13OARDS (Russian text) - Kotov A. 11. - VRACILDELO 1957, 2
(183-186)
Medical Boards should consist of a full complement or doctors whose qualifica-
'tions should be higher than at present. Raising of the qualifications of medical
officers should be a responsibility of provincial hospitals and of the Postgraduate
Institute of the Ukraine Central Institute for Assessment of Occupational Labour
Disablement and its affiliates. It would be advisable to Include in the curriculum
of Medical Institutes some theoretical and practical work concerned with assess-
ment of working capacity of patients and to act up a chair of industrial medical ex-
pertise at the Kharkov University. The greatest shortcomings in the work of the
Medical Boards are to be found in the field of resettlement. Conditions of work in
various industrial and agricultura.1 establishments are not sufficiently studied.
The disabled are not always properly resettled. During the period 1950-1954 there
was no fall in the percentage of primary disablement due to occupational injuries.
Against the background of the steadily falling incidence of diseases in the country
as a whole. one could observe an increase in primary disablement. Itisthedutyor
Social Insurance authorities to investigate the causes of primary invalidism. and
not only deal with actual cases as they arise. Medical boards should be provided
with all means necessary for a number of investigations in this field. Better pri-
mary medical documentation of the cases is essential it the work of Medical
Boards is to be Improved and resettlement work made more efficient. M
t

KOTUV, A.Po,_,,prof. (Xhar'kov)
"Prinary amputations of the extremities following crushing or
avulsion" by V.D.Durmuahkin. Reviewed by A.P.Kotov. Ortop.
travm. i protes. 20 no.5:67-69 My '59o (HIRA 12:9~
(AWMT1011) (DURMASHM, V.D.)

KOTOV, A.P., prof.
Amputation systems and prostheses. Ortop.travm. I protez. 20 no.6;
90-93 Je '59. (MIRA 13:3)
1. 1z Ukrainskogo tsentrallnogo instituta ekspertizy trudooposobnosti
i organizataii truda invalidev (direktor - prof. A.P. Kotov).
(ARTIFICIAL LIMB,
coordination of amputation with plans for
prostheses (Run))

KWOV, A.P., -prof. (KharIkov)
"Problems in the theory of pronthesis constructlo:i." Reviewed
by A.P.Kotov. Ortap.travm, i prota7. 20 nc.?:72-?'I Jl 159.
(MIRA 12:10)
(PROSTINSIS)

MTOT, A.P., prof. (F[harlkov)
"Seventh session of the Central Research Institute of Prosthesis
Pitting and Manufacture." Reviewed by A.P. Kotov. Ortop.travm.i
protez. 20 no.9:77-79 S 159. (14IRA 13:2)
(PROSTHESIS)

KOTOV, A.P., praf. (Kharikov., Dinamovskaya, ul., d.2, kv.37)
Dynamics of invbLlidism in the sequelae of industrial trauma and
causes of Its variation. Ortop. trami protez. 22 no.1:65-68
ja 161. (MIRA 14:5)
1. Iz Ukrainskogo tsentralinogo instituta ekspertizy trudqsposobnosti
I organizatsii truda invalidov (dir. - prof. A.P.Kotov). ,
(INDUSTRIAL ACCIDENTS) (DISABILITY EVALUATION)

K(rIOV) A.P., prof. zasluzhennyy deyatell nauld UkrSSR (KharIkov)
I'Medical fundamentals of applying prosthesis" by F.A.Kopylov.
Reviewed by A.N. Kotov. Ortop., travm. i protez. 24. no-4:
83-85 AP163. (FROSIMMS) OUR& 16:8)

KOTOV, A.P., zasluzhennyy deyatels naki UkrSSR. prof. (Kharlkov)
Measures for tile provention of invalidism. Vrach. delo no*9:
1217-121) S'63. (IMA 16:10)
1. bkrairiskiy TSentroLlInyy nauchno-isaledovatellskiy institut
ekspertizy trudosposobnosti i organizatsii truda invalidov,
(UKRAIM-DISAMED)

-JQWV, A.P., prof., zagluzhennyy deyatell nauki UkrSSR (Kharikov,
~--Dinamovskaya ul. d.2, kv.37)
Dynamics of disability in diseases and injuries of the
locomotor apparatun and problems of its prevention. Ortop...
tram i protez. 24 no.8.*59-63 Ag 163. (MIRA 17:1)
1. Iz Ukrainskogo instituta ekspertizy tr-Lidosposobnosti i
organizatsii truda invalidov.

KOTOVJ, A.P,, zasluzhermyy deyatell nauki, prof. (Kharikov)
New WQ.*Imethods for the improvement of medical expertise on the
working capacity expertise in the Ukraine. Vrach. delo no.1: .
125428 Ja'64 (MIRA 17:3)

BYALYY, L.A.; KOTOV, A.P.
Determination of the duration of gas f1cw In a blast f:=-acc:
by the mercury vapor indication method. Stall 25 no.3:20--i-
204 Mr 165. (rMTRA 18:4)
1. Leningradskiy politlekhnicheskiv institut I ~'herep3-;et3'.--'Y
TteLallurgich,eskiy zavcd.

L 2 h231-6g. EWf(=)/VF(c)/ZP1P(n)-2/9PR h4A-h/Pa-4 DH
ACCESSION NR: AP50012.66 3/0089164/0171006/0448/0452.
AUTHOR: MnqjN M D chk* V I., F.. Blbkhin.- 0. L.
V. N. Dudnikov- Yin V.; Zhitltsov7V. A.. Woptev,"--'
r0 er,' D. L..;.Gab I
'WocW zlikin G. A.
V__A_ _-KELE. P_ LAnUMz_AL_hL;.1 K.G. A.;'Mer
(deoeas'ed)j Orakhov#TU. 1.1 Gergeyevs -IU-,A.l
.~Iyusarey. P--N.; Unhakaz_9--J& . F-q&~Le N- X,; ChqrnyX: V. Ya.:.Shmelev.
V, M. S .'.- ." ~ % .
L
TITLE: Small-olze atomic electric powerlinstallation TES-3
.At
SOURCE! Atomnaya energiya, v. 17, no. 6, 1964, 448-452
TOPIC TAGS-. small atomic power installation. portable)ltomtc power insW4417
tion - nuclear reactor, electric power generatlof~tM-3 reactor
ABSTRACT. The paper is a summary of the SSSR report 0310 at the Third Inkr:_~
on Peaceful Uses of Atomic Ene~ffZj~ Geneva, 1964. It
describes a movable amall-size atomic electric power installation with the water
.tooled and moderated TES-3 reactor (under 10,000 kw). It coasists of four
Cat-d 12
L i~MZ5-_
ACCESSION NR: AP5001266
blocks each of which -was assembled at the manufacturing plant, and which are4
placed on four self-propelled flatcars an caterpillar tracks. No housing is re-
quired for the installation. the only local preparation needed Is the radiation
protection. The results with a demonstiation model show a satisfactory agree-
ment between the theoretically expected and actually obtained parameterd cf the
installation. OrIg. art. has: 4 figures
ASSOCIA71ON: None
SUBMTTED- 00 ENCL, 00
SUB CODE: NP
NR REP SOV: 000 OTHER: 000
v.
C.'d

LEVIN, L.ra.; VANCHIKOV, V.A.; SHUR, A.B.; KArLOV, V.D.; BrALff, L.A.;
Prinimali uchastiyet RUSAKOV, P.G.; ANTONOV, V.M.; KOSTROV, V.A.;
-.KCTOV A.P.- TEGGROVY N.D.; BUGAYEV, K.M.; SOLODKOV, V.I.;
ffdW I BO F KOREGIN, A.V.; SAFOZHNIKOV, N.P.; TSUKANOV, VA;
VITOVSKIY, V.~.*?
Mastering the operation of high-capacity blast furnaces. Stall
23 no.9:?73-778 S 163. (MIRA 16:10)

DIYACHKOV, V.K., kand.tekhn.nauk; GOLOVENKIM, S.I., inzh.;
KOTOVo A.S., inzh.
Overhead carrying and pushing conveyer with an automatic
Addressing device. Mekh.i avtom.ptQizv. 16 no.10:22-24
0 162- (MIRA 15:2a)
(Conveying machinery)

GRDINA,, YU.V.; KOM., A.V.
Tempering of work-hardoned rails and their service. I--T. v7s.
ucheb. zav-.; chern. met. 7 no.2:129-130 164.
(MIRA 170)
1. Sibirakiy metallurgicheakiy inatitut.

KOTOY ,,,,.4nzh.; GOVOROY, A.A., knnd.t,3khn.nauk, dots.; GRDINA, YU.V.,
W, ',~!A'j
- ~oktor tnichn,raiik, prof.
Thermal wear ane. fatigue notches.
met. no-7:147-152 Jl '58.
(Rallroada-Rails)
Izv. vyas uchob, zavs; chorn#
(J~URA 11:10)
(Motals-Fatigue)

U MZMM-14 Du Cbming-tal; 4QgQ7A-Aj, [translator]; KOTOVA, A.F.
(translator]; * OWSHMOV, P. 1. 9.red.; RIMYWV, A.Y., red.:
KWOKOVSKATA, LA, tekhn.red.
[.Taiwan,- a geographical outline] Taivan'; geografichaskii
ocharko Pod red. P.I-$Gluehakova. Xoskva, lad-vo inoetr.
lit-ry, 1959. 328 p. (KIRA 12:9)
(Formosa-Desoription and travel)

SMII PAN'-SHOY (Stm Plan-shoul; LI 41-YANI (Li Wen-yen]; LI MU-GHZIMI
(Li Mu-chhh LYATOKHO V.P. (translator]; KOTOVLA.V.Ltranslator1;
BOGDANOV, G.A.[translator,; POTAPMO, F.I.R-ranslatorJ; SUB' TSZIH-
CHZHI (Sun Ching-chih]) otv. red. kitayskogo izdaniya; MIWIDV, A.F.)
otvo red.,- KMIKOVSKAYA, L.M.,, -uekhn. red.
[Central China] TSentrallvyi Kitai. Otv. red. kitaiekogo izd. Sun
Ching-chih. Dloskva,, Izd-vo inostr. lit-ry, 1961. 436 PO
(MIRA 14:10)
(China-Economic geography)

LY)II Zwll-TSAY [Liang, Jen-tslaij- KMAN WANI [Huang, Ylen);
SIMI' VEY-CHMI (Wei-cblengl). GATRIMV V.G.[trannlatorl;
KOTOV,_A.,V.[tranqlator)- KOTOVA A.F.ttranslator];
S~i-TSZn)-dm,Hi[&m cAqDg-chihj., red.; CIUWOZHUKOV, K.N.,
red.; MIKHAYLOV, A.F.,, red.; BELEVA, M.A., tekhn.red.
(Southern China]IUzbrqi Kitai. Otvat. red. Sun., Ching-chih.
Moskva, Izd-vo inostr, lit-ry,, 1962. 389 p. O-MU 15:8)
(China,, Southern-F-conomic gaograpby)

GRDIM, Yu.V.; KOTOVI A.V.
Tempering of cold-worked rail steel. Izv. vys. uchebe zav.; chern.
nwt. 6 no.4tl32-135 163. (KERA 16--5)
1. Sibirskiy metallurgicheskiy institut.
(Steel--Cold working) (Tempering) (Railroads-Rails)

. A"LITCIVY A.V,
,'-'~ethod3 for calculating qaantitative ani qualitativc indicoi of the
group fori,tation notworks of eloctrenic. talophono exclimnges. Sbor. trttd.
1111Tj nc.11:211-121,. 163. (11IRA 17:9)

0 RXI N A, Yi;
A--,t;-'_Ci -Aal rt-pr,,-ductlon ol. t,-,~ defc~-,. of .-ontac~'.
man3 :~u'-. out. cf rall hi&ad-z. !z-,r.vy.,j.ucheb.za,.,.;
51)
6
fat,.g,,ie in speci-
ihern.rnet, 8
(MIFA 18:8)
bli

X-OTQY,-Alekoandr Yakavlavich; KAFUSTIRA, V.S.. redaktor; SHIKIN, S.T.j,
tildfiff-cYis2jr redaktor.
[A qrstem of lessons with the solution of typical problems in the
primary school] Sistema urokov pri reshenii tipovykh zadach v nachall-
noi shkole. Moskva, Goo.uchobno-pedagogoizd-vo Ministerstva prosve-
shchaniia RSYM. 1954. 89 p. (HIM 815 )
(Arithmetic-Study and teaebing)

SCV/107-59-3-34/52
A!", HOR - Levin, L., Katunin, G., Kotov. B.
TITME: The Radio Receiver "Syurpriz" (Radiopriyemnik
"Syurprizil)
PERIODICAL: Radio, 1959, Ur 3 pp 40 - 42, p I of centerfold,
p L~ C) f cover NSSR)
D~S'T_' ACT Padio engineers of the. Saratov Industrial-Economical
Rayon have desiCned a pocket-size radio receiver
"Syurpriz". Production of this receiver has already
started. It is a superheterodyne with seven P-14
transistors and printed circuits. The polystyrene
case is 150 x 80 x ilufl, but d-es not cave adequate
mechanical strength, especi-ally at the lbudspeaker
openings and at the t~,.rtizig oial. The total weight
OWC
o~ the radio is 520 _' - ic provided by four
alcaline cadmium-nickel of type E24P-0.42
with a capacity of -:711)-h. The batteries
Z
1/3 may be charged from a I v ~c rriet,.-iork by means
3OV/10?-59-3-34/52
Radio Receiver "Syurprizlf
of a special reet'_fLor LT-2
resistors and ane a nominal out-
put of 0.1 watt, roquired. Tho
roceiver worlu., 0~, I o ii 111 kc ) and on
-in ferrite
niedium waves CV0 I t
consistinr i r""'I 7-600, provides a
antonna,
Sensitivity of not !,,1..,/:u for the long
.,- i ; ~'- -ange*
wave ranCe and 7 mv/ri wave r
There is also a j-1cly antennao The
adjacent-channeL 1b. The receiver
has automatic g4lin e~'_Ciciency factor
of 34 50'. The P-14 of t1rie converter is es-
peoially salected since the frequency to be generated
by it must not be lower thnn 2.1 mc. Experience
showed that it ts nosribl,'t to find one transistor
which meets this require!-,!,~nt, amor- seven P-14 transist-
ors. The two-sta-c I-Tf~ REIDlif4en ,,;Qrks with a fre-
3 quency of 465 kc. T_-~ d(-,tector stage contains one

KCTOV, B.. InBturktor-plnnerist (Vilinyus).
Publish literatime on glider building (letter to.the editor).
Kryl.rod-7 no.11:12 H 156, 1 (MMA 10: 1)
(Gliders (Aeronautics))

KOTOT, B., inatruktor-pla!iarist. (g.jilinyus).
I-- . 1
7hetory glider pilots. Kryl. rod. 8 no.40-4 Ap 157. (KERA 10:6)
(Gliding and sorring)

KOTOV,J,funingrad)
The PPT-2 converter. Radio no.404 AP 162. (MIRA 15s4)
(Slectric power supply to apparatus)

3Y47
S 181/62/00i~/001/014/052
B125/B104
~le 3,S-, /0 V3 1-3 krl ~rX)
AUTHORS: Balabanova, L. A., Bredov, M, U., and Kotov, B. A.
TITLE: Plasmon spectra in In and In5b
PERIODICAL: Fizika tverdogo tela, v. 4, no. 1, 1962, a6 - Bo
TEXT: The characteristic energy loss spectra of electrons passing through
free thin films of In and InSb were measured using a device and method
described by V. M. Ageyev, L. A.- Balabanova, and 1,11. J.1. Bredov (FTT, 2, 11~
1960). The films were vacuum-deposited on rock-salt crystals which were
then dissolved. 71hen evaluating such spectra, it should be considered
that the electrons can lose energy by successive excitation of one, two,
or more plasma vibration quanta, or by pair collisions. If there is a
group of valence electrons with sufficiently varyire energy, or if the
difference between the plasmon energy corresponding to the electron
vibrations in this group and the energy characteristic of band-to-band
transitions, it will be possible to observe the lines related to the exci-
tation of collective vibrations, If the assumptions made above are correct-
the energy losses of electrons clue to the e-xcitation of plac3ma vibratiolis
Card R13

3Y 7,
1 8~7
1
1/62/004/001/014/052
Flasmon spectra in In and InSb B125/B104
cause narrow lines in the energy spectrum of electrons that have
tr,.,versed the film. These narrow lines correspond to multiples of fw,
2 = 2' r
where o 47e N/m , N is the concentration of electrons involved in plasna
vibrations. The lines that follow correspond to the excitation of one,
two, three, and so on plasmons~ The plasmon spectrum --annot be observed
in practice when the plasmon energy lies in the spectral ranL,,-e correspond-
ing to band-to-band transitions~ However, if the lines n f%ta(n =
lie in this range, the plasmon spectrum will be observable~ Practical
observations will only reveal transitions between neighborinc; bands.
Transitions from the valence band to higher bands cannot be observed in
practice under real conditions. It is assumed that chiafly tLwisiticnsfrom the
ba%d below the valence band to the latter and to the conduction band Carl
be observed in practice provided the difference in energy tet-,.reen these
tyro bands is not too large (10 - 20 ev)~ Curves recorded on InSb show no
band-to-band transitions, but furnish two distinct lines cor.respondino to
0 .10 25 LIV
sim"le and double excitation of a plasmon with the energy Lj= 12,65 1
with the probability 0.95. The semiquantitative results of the neasure-
ments discussed here might show where investigations of the characteristic
energy losses of electrons can be oil -interest for solid-state physics'
Card 2

3 3L 7
V1 8 1 /.' '216 4,'C;~'1;'C 'I,
Plas-mon opectra in In and In5b B125/11M,4
1)
'lasi.-ia vibrations can also i;ivo informaLion on the ntu.,iber of vlectrk~.'~~;
involved in valence bindinU. There are Ij fi8ures and 4 v~fe're;-C,'S:
2 Soviet and 2 non-Soviet'. The reference to the 11nE;1irh-lanjuakr;e pub'-'-3c;,.-
tion reads as follows: B. GauthZ. 11hys. Rev., 114, 1265, Ir59-
ASSOC IATIOII~ :Institut poluprovodnikov AT; 035R Lenint;rad (Ilirtitute of
Semiconductors, AS USR9' Leningrad) V~
S~iBMITTED: July 11, 1961
.eiG. 1 . Characteristic energy losses in three different In sramPles. The
curve x-x-x- is similar to that for InSb. Ordinate: relative intensity;
abscissa: unerLy losses, ev.
Card 31AI -
'715

-Az
I MX~---gm-
., vg;-
WAWV
M, - NO-

.-.. . . . -- I. - .--- - - - : I . ~ - ~~ 11. .
. . .. - . . . I- .. - .- . - I v . I .
- ... .. . . . - --,-. I .. . -I .. . "U . ..

[010410106
0120~F66TOO-OTOO-4 i
SOURCF, CODE: UR
A Ra 6030139
AUTHOR. Kotov*p B. A. (Institut poluprovodnl-kov AN SSS1r0
Le
onductorss
Opr,: Institute Or STLIC
orator ;or tii8-=--a1-ZZ-er
TITIZ pulse geni i tekilika eksperimentat no* 41966 104-106
S(yURCE.. PriborY time .anairser
T,kGS: pulse generatorp
TOPIC
ABSTRACT- A pulse 71 Dit.
generator is
described which -all
%
has been used kE- te
in a time ?,4j0 -r C,1 /7406
analyzer; the '/7', /;J#
X? r, 1730 1
latter has been .44 is J.,
employed in 6/749
4.
experiments with fl
4,
inelastic scatter I I r"r,40$
ing of slow neutront e,;oj
The unit (see fig.)! In
C014)rises a slave
oscillator with a
delayed feedback
and a regenerative uDC:621,317-765*.4 ---
pb

70 -
vitz
2
cg
WX
ORR9.
gm
Ag
NMI.
:. . . . . . . . . .
-Av-X W-9 -O~N im -, um I ~ - - - - -
oun W,

KOTOV, B. F.
"Lom,onosov and Problems on Mechanics" from Worka of the Historical Inst. on
Natural Sciences and Engineering, Vol. 5, P. 52, 1955.

i ;.
-1 C. vi
Subject USSR/Engineering AID P - 5591
Card 1/1 Pub. 1OT-8 - 3/19
Author Kotov, B. I., Eng.
Title Primary crystallization of metal in the seam welded by
submerged arc-,
Periodical Svar. proizv., 11, 10-15, N 1956
Abstract The author describes the crystallization process which
occurs during the submerged arc welding of TO to 90 mm
thick 22K steel with the ZvlGA electrode in longitudinal
and ring-shaped seams. He makes several practical
suggestions as to the adaptability and effectiveness of
the method. Four tables, 4 drawings, 11 micro-pictures,
4 graphs; OOST standard.
Institution : Taganrog (Rostov Ob) "Red Boiler-maker" Plant
Submitted : No date
RIMH, L.D., Insh.; 9020T, B.I., inzh.; KOBRIN, T.H., inzh-
Converter steel produced by means of an o37gen blow. Met.
proirr. no-1:8-31 '59. (MIRA 13:6)
1. Zavod "Krasnyy kotellshchik."
(Bessemer P'rocess)
(oxygen- Indus trial applications)

27933 S/135/61/0W/010/002/C08'
A0061A10!
AUTHORS-. Kotov, B. I., Goncharenko, N. M., Filonov, K. S., Engineers
TITLE: Mech-zmization and automation of welding operations at the "Krasnny
Kotel'shchik" Plant
PERIODICAL: Svarochnoye proizvodstvo, no. 10, 1961, 14-17
TEXT: In order to fulfill the requirements of the current Seven Year Plan,
the Plant mentioned above must achieve an increased production of boilers mainly
through mechanization and au 'tomation of welding operations. '0,10. following main
fields of welding operations and achievements brought about aria enumerated:
1) Electric slag welding. This process is now being used for welding 221 mm thlo~.
metal; bi-layer metal; up to 90 mm thick austenite chrome-nickel shells; large
size shells of 40 - 90 mm wall thickness, 3,100 mm In diameter, up to 2,100 mm
length and 120 mm thick and 2,000 mm long panels. Welding is carried out with
devices A-3110 and A372M, austenite wire CB -iXiSH96 (SvlKhl8N9B) undpr TK3- 11T_
(TKZ-IJZh) flux. In comparison with multi-pass automatic welding the production
cycle when using electric slag welding was reduced by 35-410%, labor consumption
by 30%, power consumption by almost twian and flux consumptJon by a factor of' 220.
Card 1/3 A

27933 S/135/61/000/010/002/008
Mechanization and automation of welding ... A006/A101
2) Automatic and semi-automatic submerged electric-arc welding. The Plant
developed a number of automatic machines including a device with an automotive
column and a portal type machine for the welding of containers. Automated
welding was also applied for thin-walled large-size 1X18H9T (lKhl8N9T) steel
containers of 3060 mm in diameter, 10,780 mm cylinder length, and 6 mm wall
thlcXne5s. The operational temperature of the container wall was - 180 0C. The
welding of the cylindrical section was W%- automated, the panels were welded with
tractor TC-32 (TS-32) which had been redesigned. A machine w1th a Chain bevel-
Ing tool and a carriage, moving together with the welding to[,ch, is being used
for the automatic welding of frame-beam structures of boilers; a rotary type
machine with adjustable Inclination of the face plate Is employed for welding
flanges to 200 - 1,600-mm sleeves and pipes. Satisfactory results were obtained
with automatic building up with austenite steel of scaling surfaces of boiler
fixtures and high-pressure steam preheaters. Several units with a rotating
face plate were designed to fasten built-up parts of various sizes and weights.
3) Resistance butt welding of pipes. Resistance welding has been fully alito7-
mated and the following butt welding machines are being used: MCM-150 (msm-l"-0),
ACM-150 (ASM-150), AGM-300 (ASM-300), MCM-320 (I-ISM-320) and MCO-4oO (14'so-4oo)
At the recommendation of TsNUTMASh butt-welding of pipes by continuous flashing
Card 2/3
17113 3/135/61/0()0/010/C-o2/cc)8
Mechanization and automation of welding ... AOo6/Aio'i
was developed and introduced. From 1957 butt welding of Perlite steel pipes
was assimilated, eliminating internal burrs by oxygen-air blast. Presently
research is directed on butt welding of pipes with induction heating. 11) Flame,
cutting of metals is widely used. Manual and machine oxygen cutting is employed
for cutting carbon low-alloy and two-layer steels and oxygen-flux cutting fol,
cutting high-alloy steels. From 1957 the aforementioned operations have ,been
carried out with the aid of natural gas. With the assistance of the Rostov
NIITM, the Institute of Electric Welding imeni Ye. 0. Paton, NII'TVCh imen!
V. P. Vologdin, TsNIITMASh, and the Taganrog Radio-Engineerirg Institute, the
"Krasnyy Kotel'shchiklf Plant is occupied with a series of investigations and
projects including the weldability of new steel grades, the development of
efficient electrodes and welding fluxes. In the honour of the XXIT KPSS Congress
the Plant undertook to design the first '_`,; . 110 (TU-11C) boilel, ,;i t/ ur
steam capacity. There are 7 figures and I Soviet-bloc ho
X
Card 3/3

5/769/61/000/000/002/004
AUTHOR: Kotov, B. 1.
T IT LE: Automatic hard-facing of protective surfaces with austenitic steel.
SOURGE: Avtomatizatsiya i mckhanizatsiya svarki; novoye v 9varochnorn
proizvodstve na Taganrogskom zavode "Krasnyy kotel'shchik. " Comp.
by M.V. Korsunov. (Rostov) Rostovskoye knizh. izd-vo, 1961, 27-40.
TEXT: The paper describes the overlaying of austcnitic steel (AS) by welding
onto the seating surfaces of Ranges, covers, etc., and onto the protective interior
surfac2 s of two-layered water heaters (180 kgjcm2, Z250G), hi h p boilers (to 140
kg/cm , to 5100C), and petrochemical equipment (to 70 kg/cm~ _-30 to 5600C)
made of 7 standard steels (full-page table) 16 to 200-mm thick. The amount of
metal added varies between IZ g and 111.3 kg. The basic requirement for the hard-
facing (HF) metal are listed, including hardness, toughness, grindability, and corro-
sion resistance. Ferrite packing rings were sufficiently hard and wear-resistant
but were corrosion-prone because the Gr carbides in the ferrite formed electrolytic
pairs with the ferrite. HF with OX13 (OKhl3) led to increased corrosion and fiesura-
tion in the HF metal. Austenitic CrMo steel was found to be most satisfactory for
hardness (H) and corrosion resistance (GR). When the required AB is 150-180, use
is made of a 9T- I (TsT- 1) electrode with an OB-OXIBH9 (Sv-OKhl8N9) welding (W)
rod (R) and a TJ13-AT (TLZ-AT) electrode with a Sv-KhZ5NI3 W R (according to
All-Union Standard GOST Z246-54). On parts requiring HB=220-270 (up to 300), HP
Card 1/3 t

Automatic hard-facing of protective surfaces. . . S/769/61/000/000/002/004
has been done since 1957 with an austenitic TKZ-A electrode (E). HB was increased
without loss in CR by increasing the a-phase content. At first, a thin lining of austen-
itic steel was welded onto the base metal, but the procedure was too difficult and the
results disappointing, whereupon electric arc HF was introduced. In 1957 manual HF
was replaced by automatic HF under a special flux, TK3--Y (TKZ-U). the composition
of which is tabulated, and with the abovementioned Sv-Kh25Nl3 3-mm wire. The
TKZ-A E and the HP metal applie -d thereby are described in the sbornik "Spravoch-
noye proizvcdstvo, no. 3, 1959. of the TsBNTI (Central Scientific- Technical Research
Bureau) of heavy machine building. The basicity of TKZ-U flux protects the Cr. Mn'
Si, and Mo against burning off. It aids in maintaining a stable arc and forming a
smooth weld. After congealing the slag is readily removed. HF must be done in a
reverse- polarity d.c. welder. The W must be done in 2 or 3 layers, Metallography
showed the facing metal to have a dendritic structure as in cast metal. The heat-
affected zone is 3 to 5 mrn wide, 2 to 2.5 nun deep. The facing metal is dense, with-
out defects. The we ld-to- parent- metal transition is gentle (Z cross- sections). The
first W layer is shown by spectroscopy to have little Gr (0. 7-2.910) and Ni (1.5-3.07o)
near the parent-metal boundary, increasing to 719 Cr and 10-121ONi farther away from
it; the second and third layer have a normal content of Gr (12-Zl7o) and Ni (12%). The
variation in RB from 107 in the first to 91-95 in the second and 75-81 in the third layer
is interpreted. The variations in chemical composition and H throughout:the 3 facing
layers are tabulated. It is demonstrated that the mutual mixing of the facing metal
Card 2/3

PIVOVAROVA, Z.K., inzh.; DONTSOVt Ye.P., inzh.; ROSTENKO, V.R., inzh.;
U_TOV,_B_._I., inzh.
Mechanization of the production of water glass for electrodes.
Svar. proizv. no.504 Yj 164. (MIRA 18%11)
1. Taganrogskiy zavod "Krasnyy koteltshchik".

KOTOV, B.M.
Direct-current PPT-2 transformer. Prib. i tekh. eksp. 7 nr,.2:
177-178 Yx-Ap 162. (KRA 15:5)
(Electric transformers)

T';,'!.IOF:YEVA, 11.7.~ KOMV, B.V.; SIVRPATTY, V.A.j PRAVEEDNIKOV, A.U.
0
FI'll of certsin Irm-liated nit~riles. OPt. i sy-ktr~ 18
no.5-,8142-645 NV 165. (Mil:'A 18:10)

VOYTSZMVSKIY, B.V.; KOTOT, Me.
Optical investigation of the detonation spin wave front. Izv. Sib.
otd. All SSSR no*4:74430 158. (j4rRA 11:9)
l.Inatitut gidrodinamiki Sibirskogo otdelenlya AN SSSR.
(Explosions)

'I.&,MITROPANOV, V.V.; TO IYAN, Me.
VOYTSMOVSM, M.;,,MVa~T WE
1".
r
Optical iuvestigatlon of transverse detonation waves. Izv.SIb.
otd. AN SSSR no.9:44-51 158, (UM 11111)
1. Sibirsbys otdoleniye AN SSSR,
(Riplosions)

I D. A.
KOTOVI
IfFiber Purifier for a Sow Fiber Separator." ',:.-n Hli,-he-r :-~ducatian USSR, Tashkent Te~:tile
Inst, Tash-kent., 1952
(Di3sertation for Vne De-r, ee of Candidate of Technical Scionces)
60: 11Kniz,hriaya Dotopls', 141o. 32, 6 IM',r 55

ROGANOV, Boris Ivanovicb, doktor tekhn. nauk [deceasedl; DZHABAROV,
Gafar Dzhabarovich, kard. tekhn. nauk; KOTOV, Dmitriy
Andreyevich, kand. tekhn.nauk; BALTABAYEV, Sultan Dusayevich,
kand.--tekhfi. nauk; SOLOVIYEV, Nikolay Dmitriyevich, inzh.;
DORMANR I.M., retsenzent; DUKHOVNYY, F.N.., red.; SOKOLOVA,
V.Ye., red.
[Primary processing of cottonj Pervichnaia obrabotka khlopka.
[Byl B.I.Roganov i dr. Floskva, Legkaia industriia, 1965.
485 P. (MIRA 18:12)

KOTOV, D.A., katd.tekhn.nauk
Using grates for separating notes in. eaw gins. Sbor. nauch.-ioul.
rab. TTr no*4:5843 '57. (MIRA 11:9)
(Cotton gins and ginning)

KOTOV, FA., brigadir
- ------
Make persist-nt efforts for the adoption of new developments.
Ugoll Ukr. 5 no.10:17 0 t6l. (MIRA 14:12)
1. Kompleksnaya kmbaynovaya brigada shakhty llo,10-bis txeita
"Snezhnyanantratsit".
(Donets Basin-Coal mininr. maWdnery)

KOTOV, F.F.
Waste purification structures of the Asha Wood Chemicals Combine.
Gidroliz. i losokbim. prom. 17 no.6s24-25 164. (MIRA 17:12)
1. Ashinskiy lasokhimicheskiy kombinat.

KOTOV, F.
~. 4.7 ''
Great rise in the welfare of workers in the GermAn Democratic
Republic. Sote.trud no.10:'84-96 0 157. (MIRA lo:11)
(Germany, East--Economic conditions)

EuNi, I;.
lalcor producti7ity iz a den-le!W? ftiCtor Of
industrial
6;1~ovj,ll In t`.i, soven Years. Sutg.trud 4 no-1:9-17 Ja t59,
(MIRA 12:2)
(Labor productivity)

ZAMIN, N.H., kand.okonom.nauk; ZMMSKIT, G.K.t-KOTOT, F.I., kand.
ekonom.nau1c; ROSHCHIN, T.T.; HKDYMM, H.If.-;-rad-.j-tMSITHOTA,
Te.S., tekhn.red.
[Planning the training and distribution of the labor supply in
the U.S.S.R.] Planirovanie podgotovi-i i raspreaeloniia rabochikh
kadrov v SSSR. Koakva,-Gosplanizdat, 1960. 150 p.
(HIRA 14:3)
(Ranpower)

KOTOV, Fedor Ivanovich; KEWTMV, H,K,, red.; PONOMAREVA, A.A** takhno
red.
(Problems of labor in the seven-year plan] Voprosy tnida v
semiletnem plane. Moskva, Gomplanizdat, 1960. 209 p. (MIRA 13.-5)
(Labor and laboring olasses)

KUDRYAIJTSEV, A.S.,, prof.,, doktor ekonom. nauk.. zasl. deyatell nauki i
tekhniki RMSR; LYASNIKOV, I.A.p dota.; KOSTIN, L.A.p dote.;
PUNSKIY, Ya.M., profi,-; PETROCMIKO, P.F.,, kand. ekonom. nauk;
GURIYANOVI S.Kh., dots.; KURM, N.I.j st. prepodavatell;
-KOTOV,-F.I.-, dots.; RDIIZOV, K.S.p kand. ekonom. nauk;
TOLYAKGV~ I.A., starshiy prepodavatell; BEZRUWV# Beff.9 retses-
zent; KOPYLOVAg L.P.,, red,;.ANDREMA, L.S., tekhn, red,
(Labor economics in the U.S.S.R.) Ekonomika truda v SSSR. 2..,
perer. izd. Moskva, Izd-vo 'NeSPS Profizdat, 1961. 623
(MDRA 15:2~*
(Labor and laboring classes)

, F
~nl O-V .. !odor Ivanovich; EYDELIM, B.I., red.; BAZLOVA, Ye.M.,
inlad'shi:~ r6d.-
(Problems of labor and wages during the period of transi-
tion to cormunism) ProbleuV truda i zarabotnoi platy v pe-
riod perekhoda k kommunizmu. Moskvaj Ekonomizdatj 1963.
335 P. (MIRA 17:1)
(Labor and laboring classes) (Wages)

KOTOV,..,G.; POPRAVKO, L. (Zhitomir)l BOYKOv P. (Kiyev); BEIRG, I. (Simferopol)
They are from the Ukraine. Pozh.delo 9 no.11:26-27 N '63.0-URA 17:1)
1. Zamestitell nachallnika uchobnogo otdela KharIkovskogo pozharno-
tekhnicheskago uchilishcha (for Kotov).

KOTOV,__q,____.
Keeping in touch with alumni. Pozh.delo 6 no-5:27-28 My '6o.
(MIRA 13:8)
1. Zamestitell nachallnika uchebnogo otdela Kharlkovskogo
pozharno-tekhnicheakogo uchilishcha.
(Kharkov-Fire prevention-Study and teaching)

KOTOV, G., gvardii polkovnik; LETUNOVSKIY, V., mayor
Erecting a floating bridge in winter. Voen. vest. 4,1 no.3:
87-89 Mr 62, (MIRA 1514)
(Pontoon-bridges)

KOTOVy Go
Gjqd training produces good results. Pozh.delo 9 no.5t27 My
163. (KIRA 160)
1. Zamestitell nachallaika uchebnogo otdela kharlkovskogo
pozhamoootekhnichaskogo uchilishcha.
(Fire prevention-Study and teaching)

XOTOV, G.A.. inzh.: SMV, O.V.. inzh.
Housing construction with the participation of amateur builders.
Mekh.stroi.14 no.10:31-33 0 '57. (KIRA 10:12)
(Building)

- KOTOV, G.A., inzh.
Organizing the operation and repair of building machinery;
operational experience of the Voronezh Economic Council.
Mekh.stroi 15 no.7:15-17 JI 158. (MIRA 11:9)
(Voronezh Province--Building machinery--laintenance and repair)

KOTOV, G.A., Inzh., red.; PRMOVA, Y.Y., red.izd-va; RYAZANOV, Foyeep
fC-khn.red.
(Temporary instruction for constructing and using tracks on
wooden ties for Si 78-60 building tower cranes] Tremennaia
instruktsiia po ustroistvu I ekspluatatsii rellsovvkh putel
na dereviannykh shpalakh dlia stroitellnykh bashennykh kranov
:21 78-60. Moskva, Gos.izd-vo lit-ry po stroit., arkhit. i
atroit.materialam, 1960. 44 p. (MIRA 13:10)
1. Russia (1923- U.S.S.R.) Gosudarotvennyy komitet po delam
stroitel'stva.
(Cranes, derricks. etc.)

KDTOV, G.A., inzh.
Temporaz7 instruction on making and using crane ranways
Makh.stroi, 17 no#433 of cover Ap 160. (MIRA 13:6;
(Cranes. derricks, etc*)
-.714,11.1
~'e
'-!~: ~ 16

KOrOV, G.A.y inzh.
ResUlts of the all-Union competition for the
load limiters for cranes. Wkh.atrois 19
(Cranes, derriekap etc.-~Equipment and supplies)
best,examp-les of
no*7s27-29 Jl 162.
OIRA l5S7)
VA,rAv r-,

KOTOV, 0.
Studies of economic differentiation prevailing on farms. Samqrn, 1927, 46p.
Cyr.4 RD695
1. Agriculture-Economic aspects-Russi.a.