CAMERA B 7 WAS USED IN MISSION 8101 FLOWN ON 14 JUNE 1966.

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A000600190050-1
• Release Decision: RIPPUB
• Original Classification: S
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: April 8, 2008
• Sequence Number: 50
• Publication Date: June 16, 1966
• Content Type: CABLE

Approved For Release 2008/04/08: CIA-RDP78B04558A000600190050-1
OUT58824 I
25X1
25X1
S E C R E T 161427Z CITE 17490
1. CAMERA B 7 WAS USED IN MISSION 8101 FLOWN ON 14 JUNE 1966.
PROCESSING WAS ACCOMPLISHED BY NAV RECON TECH SUPPCEN.
2. ORIGINAL NEGATIVE:
16 JUN 1966
- - - DISTRIBUTIM
COMPARED TO CAMERA B 125 AND MOST OTHER CAMERAS FROM THIS SYS CY o gfflc~ Action
BUT COMPARABLE TO WHAT WE HAVE BEEN RECEIVING FROM CAMERA B 7 FI
7- os
MI. R . -.---
F. 9R SIDE: THERE IS A ROW OF MINUS DENSITY DOTS 0.55" ItEC
gcL'. OR Y, ,.._....~,..
P&D3 -
FROM AND PARALLEL TO THE OUTBOARD FORMAT EDGE ON THE FIRST 250 --[ cSo
IPD
FRAME..,'. THE SPACING BETWEEN THE DOTS IS VARIABLE. THERE IS A- PQ
P5D
CONTIPUOUS FINE PLUS DENSITY STREAK 0.7" FROM AND PARALLEL TO -ICB
11D
SAME FORMAT EDGE ON THE FIRST 425 FRAMES. PLUS DENSITY SPOTS IAD
CAUSED FROM ROLLER CHATTER ARE MINOR BUT INTERMITTENT IN THE 0 OA G
DIAXX-4
BOARDER THROUGHOUT THE MISSION. THERE IS ALSO MINOR TRACES OF 0 AD
N
CHATTER ALONG THE INBOARD FILM EDGE ON THE LAST 500 FRAMES. TH
IS A PAIR OF PARALLEL STREAKS OF FOG NEAR BOTH FILM EDGES OCCUR
Ism
Ado
40.0" AFTER FRAME 1596. THE STREAKS IN EACH PAIR ARE 0.5" APART. $UAW
THE PAIR AT THE OUTBOARD EDGE ARE 0.5" FROM THE FORMAT EDGE. THE
OTHER PAIR ARE 3.0" FROM THE INBOARD EDGE. BOTH PAIRS APPEAR ON
THE SAME FRAMES AND ARE ALWAYS IN THE SAME AXIS, ADJACENT TO EACH
OTHER.. THE MARKS ARE VERY FAINT ON FRAME 1596 AND BECOME PRO-
GRESSIVELY DARKER. THERE IS A MANUFACTURING SPLICE ON FRAME 39
Approved For Release 2008/04/08: CIA-RDP78B04558A000600190050-1
 Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190050-1
0
0
AND A HEAT SPLICE ON FRAME 810.
C. 9L SIDE: THE FIRST 20 FRAMES AND FRAMES 657 THROUGH
1216 CONTAIN WHAT APPEARS TO BE PROCESSOR INDUCED ABRASIONS ON
BOTH THE EMULSION AND SUPPORT. THESE ABRASIONS ARE MINOR AND DO
NOT I'gHIBIT INTERPRETATION. THERE IS A REPAIRED TEAR IN FRAME 23
AND EIGHT HEAT SPLICES THROUGHOUT THE MATERIAL. A MANUFACTURING
SPLIC' IS LOCATED IN FRAME 881 AND A BLISTER OR EMULSION DEFECT
LOCAT'D IN FRAME 1624. MINUS DENSITY DOTS CAN BE DETECTED RANDOMLY
THR OUI'3HOUT.
'). BOTH SIDES: THERE ARE 1753 FRAMES ON EACH SIDE.
THERE WERE NO MAJOR MALFUNCTIONS.
3. POSITIVE:
!k. THE PI SUITABILITY IS POOR COMPARED TO THE MATERIAL
ACQUIRED FROM CAMERA B 125. IT IS SUGGESTED THAT CAMERA B 125
BE USED WHENEVER IT IS AVAILABLE.
13. THE PRINTING AND PROCESSING OF THE REPRODUCTIONS ARE GOOD.
C. LESS THAN 5 PERCENT OF THIS MISSION IS DEGRADED BY CLOUDS
OR GROUND HAZE.
S E C R E T
:END OF MESSAGE:
Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190050-1