Inspection Report No. 5 - RS-101(Classified)
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78-02820A001200050032-8
Release Decision:
RIPPUB
Original Classification:
S
Document Page Count:
2
Document Creation Date:
November 17, 2016
Document Release Date:
July 28, 2000
Sequence Number:
32
Case Number:
Publication Date:
September 29, 1966
Content Type:
MF
File:
Attachment | Size |
---|---|
![]() | 99.57 KB |
Body:
Approved For Release 2000
OPTIQ~IAk FORM No, 16
MAY 1952 EDITION
OSA GEN. REG. NO. 21
5010-107
Memorandum
DP78-02820A001200050032-8
EP 66-216
o The Files: Contract 4168, Task Order 2 DATE: 29 September 1966
25X1A9a
SUBJECT: Inspection Report No. 5 - RS-101
1. Project Description:
The RS-101 is a 2 - 24 Mc/s solid-state radio intended for
paramilitary operations. The semiautomatically tuned transmitter
produces 20 watts in the CW mode and 5 watts in the AM mode. The
receiver is capable of receiving AM, CW, or SSB signals. There
are provisions for a battery and either a synthesizer (OS/B-100)
or crystal matrix. The RS-101 weighs 10 pounds and is approximately
7 1/411 x 12" x 4 1/2".
2. Contractual Information:
Mr.
Mr.
a.
b.
Initial Cost:
Request for Procurement Action:
28 September 1965
6
c.
d.
Initiation Date:
Completion Date:
5
12 October 19
12 August 1966
Extension:
November 1966
e.
Deliverable Items:
Four service test models,
manufacturing
drawings, and production
specifications
3. Date of Meeting: 20 September 1966
4. Place of Meeting:
5. Persons Attending:
Agency Non-Agency
25X1A9a
6. Contractor's Performance:
25X1A1a
Mr.
Mr.
a. On schedule and expected to remain so: Yes
b. within obligated funds and expected to remain so: Yes
c. Satisfactory technical progress: Yes
7. Project Status:
" KCIIffIP.I .^.9'PKtit
25X1A5a1
25X1A
25X1A5a1
Approved for iel`ease ( I08e ~r l R -~ i 10d 60050032-8
Approved For Release 2000/08/1 ' P78-0282OA001200050032-8
EP 66-216
SUBJECT: Inspection Report No. 5 - RS-10l
7. Project Status:
The four service test model RS-101's are being fabricated.. All
PC boards for the receivers were complete and assembly of one receiver
also was complete. Mechanical piece parts are in various stages of
fabrication. The cast cases and front panels are being machined.
25X1A5a1l 1e front panel cover was changed from a fiberglas material to one
ted of aluminum. Allllllllllllllllll has also selected and will use the
25X1A5a 1~~ transistors as the final amplifier transistors in the RT-101.
An engineering model OS/B-100 synthesizer was tried with the RT-101.
The results were approximately equivalent to performance of the RT-101
when used with the OS-100. Also, a series of tests were run with the
RT-66P2 transmitter (equivalent to the RT-101 except in form/packaging
layout) reducing the input voltage down in various increments from 12 V
to about 9.5 V. The output power of the transmitter decreased to about
15 watts at 9.5 V.
25X1A5a1 _ does not foresee any schedule slippage regarding delivery of
the four service test units during mid-November 1966.
Dis uribution :
R&D Subject File
OL/PD/PCB/CAS
R&D LAB
OC-OS
E SB
Monthly (3)
EP Chrono
25X1 A9a OC-E/R&D-EP : jp/x3152 (29 Sept 66 )
Approved For Release 2000/08/16 Cl
X1 K. R C'-11Pi KN
20A001200050032-8
25X1A5a1
25X1A9a