Trip Report - AS-3
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78-02820A000500020018-5
Release Decision:
RIPPUB
Original Classification:
S
Document Page Count:
2
Document Creation Date:
November 17, 2016
Document Release Date:
March 10, 1998
Sequence Number:
18
Case Number:
Publication Date:
April 17, 1959
Content Type:
TRIP
File:
Attachment | Size |
---|---|
![]() | 218.1 KB |
Body:
Approved For Release 2000/09/
25X1A9a
25X1A5a1
25X1A5a1
The Piles - ID-122, T.O. 1
P78-02820A000500020018-5
59 a visit was sade to
gy, to monitor the
t
t of Automatic Agent 8et,
corning this program were:
3
2. The contractor we. told of the arui
had been encountered during the preliminary
15 to 27 Mnrch 1959. Principal among these was coder unreliability,
evidenced by erratic spacing between dots and dashes. The contractor
was told that the tun electrical defects which arose during the tests
together with the coder faults, must be remedied in the remaining
.it prototypes. On one unit (Serial 514) RF was leaking back into
the keying amplifier and causing improper operation, and in the other
(Serial 515) the pit-output inductor was intermittent.
25X1A5a1 3. said the coder problem was probably due to incon-
sistent tape advance, especially when ttimilliSH key is depressed. In
one of the coders recently completed at this effect had been
quite pronounced, and a remedy is now being investigated.
was told that unless the remaining coder* could be r
their use by unskilled operators, we could not cons
coder icL2Hantity. He said he had already discussed ad
25X1A5a1 anotherillimmtanical engineer, the possibility of providing k
overtravel so that the tape advance wae not so intimately related to
the speed and extent of the key downstroke.
4. 1111has encountered, in re-delivery chcka of see. of the
transmitters the same RP feedback problea noted by as in our field
tests. 3110111Itelephoned on 10 April, in fact to any that the
two A- s ems due that day mould not be S ready teceuse this problem
had arisen.) The contractor had found that the field expedient used
by as (installation of an RP choke in the keying line) has eliminated
that feedback, and the eight keying amplifiers being assembled at
are being rewired to include this aodification. The inductor trouble
has never been encountered atM and was not present in the four
tranenitters checked by the writer. was told we would watch
closely for this problem in future field tests and advise him if it
arose again.
Approved For Release 2000/09/11 78-02820A000500020018-5
25X1A5a1
25X1A5a1
25X1A5
25X1A5
25X1A5
25X1)
25X1P
25X1A
Approved For Release 2000/09/f R gRDP 78-02820A000500020018-5
i".
?5X1A5a1
25X1A5a1
25X1A5a1
25X1A5a1
5
told that our tests revealed other
of the OS3 which would have to be remedied before the eqyip-
d be produced
ityi
It freqoently ono to two tnute to tuns
up the trans-
ittr simply beeause rota ing t output inductor by
means of the knurled thumbscrew is such * slaw procedure
Operational unite will have to have either a low power (less
than 1 watt) TOE position or, preferably, 6 fester method
for sweeping throu0 the induotance range, such as a sliding
contact on the coil.
b. The absence of break- appeal A unne li tion
on more flexible operation, Minor wiring ehng.s could be made,
it appeared, mhich would allow the operator to har ti.
station *between dashes* on menual CW? and immedietely a
releasing the IDT or MC button. This change mould also ce
the number of function switch po5itione from 3 to 2.
c. Operational AS-3 systems must include a soeket end the neceeeery
ci work with the 0S-4 Agent VFO recently developed
by
6. Additional changes are sure to aril,* a*
tieue, the contractor was told, but he was invited
solutions to the zbore p?Ub1*$dI since it was like
solved prior to produetion. vaid that
several layout changes prior to production, in order
and make the eomponents of the transmitter more readily aoc.sdb1s. The
present design ia not reproducible, except at high cost and in limited
quantity, he said. When pressed for an estimate of redesign time, he said
that it uould take about 6 months to ooze up with a final layout and build
one or two systems, but that production in lot* of 20 or so per month could
begin about 90 d*ys later. This estimate compares with
months for delivery of production AS-3 leas is* ven bj
13 Mareh. The writer wee unable to see on
was busy all day on a rueh re rt for
tional tests con-
thinking about
vould have to be
25X1A5E
' went to make 25X1A5E
lify assmably
on 25X1
25X1P
25X1A
7. TWo additional 0-3 mysteme. less 4G suppliee, ivsr delivered to
writer, who observed their final cheek-out tests. Six extra cartridges
ld that st least one would be sent to
for their use with toe magnetic CI-S Cod.r/K.yez.
button:
SOO Subject File /A6mth1y Report
OC-0 0C-2/CT-OR
R&D Lab Er Chrono
Approved For Release 2000/0a11
00-E/ROD-WWJS:wlj Ap
25X1A9a
78-02820A000500020018-5