INDEX TO INTERNATIONAL CHINA EMBARGO LIST

• Document Type: CREST
• Collection: General CIA Records
• Document Number (FOIA) /ESDN (CREST): CIA-RDP62-00647A000200060002-3
• Release Decision: RIFPUB
• Original Classification: S
• Document Page Count: 90
• Document Creation Date: December 9, 2016
• Document Release Date: July 11, 2000
• Sequence Number: 2
• Content Type: LIST

Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
I ND E X
TO
INTERNATIONAL CHINA E1,ARGO LIST
This document tells which item number or numbers on the International
China Embargo List covers each item listed on
(1) the China Special List;
(2) The International List as of August 15, 1954 (CoCom Doc.
700.1, .2 and .3 and amendments 1-16 thereto);
(3) the revised International List (CoCom Doc, 1700.1, .2 and
.3, as amended).
It will be noted that some items appear only on the international
China Embargo List (ICEL) while other items appear both on ICEL and
on the appendix. Where part or all of an item which appears on ICEL
also appears on the Appendix, the ICEL number is marked with an
asterisk. This technique was adopted as a simple method of indicating
which items are subject to CoCom Doc. 471 (Revised) exceptions pro-
cedure. Actually, therefore, the appendix covers all items for which
the source is either CoCom Doc. 700.1, 700.2, as amended, or CoCom
Doc. 1700.1 or 1700.2, as amended.
Conversely=, no item which is covered only by CoCom Doc. 700.3,'-CoCos
Doc. 1700.3 or the China Special List, appears on the appendix. (Items
which appear on Doc. 1700.3 Amendment 17 which were formerly on Doc. 700.1
or 700.2, however, will appear on the appendix since they are still
subject to Doc. 471 (Revised) exceptions procedure).
*DOC Exempt Letter On File*
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Appri ' ? or Release 2000/08/23: CIA-RDP62-00647A000-200060002-3
l.idex to International China Emba,p List
Metalworking Machinery
CoCom Doc. 700.1
ICEL
CoCom Doc. 700.2
ICEL
as amended
ICEL
Appendix
as amended
ICEL
Appendix
1001
0001*
0001.29
2002
0001*
0001.36
1002
0001*
0001.30
2006
0001':
0001.37
1003
cool*
C001.31
2007
0001',
0001.38
1006
C00l*
0001.32
2015
0001*
C001.14
1007
0001*
C001.33
2016
cool*
0001.28
1008
0001*
0001.34
2017
0001*
0001.15
1009
0001*
0001.35
2019
cool*
0001.16
1015
C001's
C001.13
2035
c001f-
0001.10
1016
Cool
0001.14
2036
00013:
0001.11
1017
C001*
0001.15
2050
0001'
0001.40
1018
cool*
cool.16
2051
cool's
0001.39
1019
0001,:
0001.17
2052
0001*
0001.39
1020
cool*
0001.18
2060
cool*
0001.50
1021
0001*
0001.19
2066
cool'
cool.63
1022
cool*
0001.20
2070
0001*
0001.52
1023
0001-s
0001.21
2071
co01'
0001.61
1024
0001*
0001.22
2072
0001%,
0001.54
1025
0001"*
0001.23
2085
0001*
0001.51
1026
0001%,
0031.28
2086
0001s
0001.62
1027
cool*
0001.24
1035
0001%
0001.1
000om Doc. 700.3
1036
0001x-
0001.12
as amended
1037
cool*
0001.2
1038
0001*
0001.3
3001
0001*
--
1040
cool*
0001.4
3006
cool*
--
1041
0001,
0001.5
3015
Coop
--
1042
0001::
cool.6
3016
0001s
--
1043
0001':
0001.7
3035
0001*
--
1044
0001*
0001.8
3066
0001*
--
1050
0001*
0001.42
3070
C002
--
1051
0001'*
0001.43
3071
0001*
--
1052
C001*
0001.39
3072
0001*
--
1053
0001*
0001.41
1060
cool--
0001.44
1061
c001-
C001.46
1065
cools
0001.55
1070
cool*
C001.52
1071
Cool':
0001.53
1072
cools
0001.54
1073
cool*
C001.59
1074
0001-
0001.45
1085
0001*
Co01.60
1086
0001*
0001.58
1087
coop
0001.47
1088
cool'
0001.48
1089
0001*
0001.26
1090
0001*
0001.49
1091
coop
0001.27
06
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Apprcir Release 2000/08/23 :-CIA-RDP62-00647A000200060002-3
index to International China Embargo List
Metalworking Machinery.
COCom Doc-1700.1
as amended ICEL
ICEL
Appendix
CoCorm Doc. 1700.3
as amended
ICEL
Appendix
1001
0301*
0001.29
3008
0001,,
0001.34
1002
0001*
0001.30
3010
0001*
0001.13
1006
0001*
0001.32
3011
0001*
0001.14
1016
c001-
0001.14
3012
C001*
0001.28
1017
cool*
0001.15
3017
0001%*
0001.15
1019
0001-
0001.17
3018
0001*
cool.16
1021
0001%
0001.19
3034
0001*?
0001.1
1022
c001%~?
0001.20
3050
cool*
C001.40
1023
0001,,
0001.21
3055
0001"-
0001.50
1025
0001-:
0001.23
3067
0001':
0001.63
1027
C001%:
0001.24
3068
0001*
0001.63
1039
00014*
0001.10
3072
00014'r
C001.54
1040
Co01*
0001.4
1041
COOL'S
C001~5
1042
00013
Cu01.6
1043
0001'
0001.7
1044
0001'*
0001.8
1050
0001*
0001.42
1051
0001*
0001.43
1052
COOL'S
0001.39
1053
0001
0001.41
1065
0001*
0001.55
1070
Co01*
0001.52
1072
cool*
C001.54
1073
Cool:
0001.59
1075
c001*
Coo1.9
1080
cool,
0001.56
1081
00014,
0001.57
1084
0001*
0001.25
1086
00013
0001.58
1087
Cool*
0001.47 and 0001.63
10,018
0001*
C001.48
1089
cool=
0001.26
1090
0001%*
0001.49
CoCom Doc. 1700.2
as amended
2001 COOL'S
C001.29
2002 0001*
0001.36
2003 Cool*
C001.31
2050 C001411-
0001.40
2052 cool*
0001.39
2070 Co01*
0001.52
2074 0001'
0001.53
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
Index to Iiternatiolal China Embargo List
Chemical and Petroleum Equipment
COCOH Doc. 700.1
as amended
ICEL
ICEL
Appendix
COCOM Doc. 700.2
as amended
ICEL
ICEL
Appendix
_
1101
C101*
0101
2101
C120*
0120
1102
0102*
0102
2110
C335*
C335
1103
C103*
0103
2130
C339*
0339
1106
C104*
C104
2131
C340*
C340
1107
C105*
C105
2132
0340*
C340
1109
0106*
0106
2136
C338*
C338
1110
C107*
C107
2141
C118*
0118.
.2
1112
C109*
C109
2142
0119*
0119
1113
C110*
C110
1116
C111*
Cllr
CCCOM Doc, 700.3
1118
C112*
C112
as amended
1120
C114*
0114
1123
C115*
C115
3101
0120
- -
1124
C116*
0116
3102
C122
-
1127
C336*
0336
3105
0121
- -
1130
C337*
C337
3110
0104*
- -
1131
C338*
C338
3127
0336*
-
1132
C339*
C339
3131
C338*
- -
1133
0340*
C340
3140
0118*
- -r
1134
C340*
C340
3143
C123
- -
1135
C340*
0340
31"
C124
-
1140
C108*
0108
3150
0309*
1141
0118*
0118.1
1145
C553*
C553
{
1146
C327*
C327
1150
g126*
C126
1151
128*
0128.1
1152
C127*
C127
1153
0128*
0128.2
1154
C602*
0602,5
1155
C128*
0128.3
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : Li-ftCfP&2,10647A0002D0060002-3
Index to International China Embargo List
Chemical and Petroleum Equipment
COCOIVI Doe. 1700.1
ICEL
as amended
ICEL
Appendix
1101
C1ol*
ClOl
1103
C103*
0103
1106
cio4*
c104
1110
C107*
C107
1112
C109*
C109
11181'
C112*
C112
1118!
C113*
C113
1125
C117*
C117
1130
C337*
C337
1131
C338*
C338
1132
C339*
C339
1133
c34o*
C34o
1142
C119*
C119
1150
C126*
C126
1151
C128*
C128
1152
C127*
C127
1153
C128*
C128.2
1154
C6o2*
C6o2.5
COCOM Doc. 1700.2
as amended
ICEL
ICEL
Appendix
2129
2133
2154
COCOM Doc. 1700.3
as amended
C339*
C34o*
c602*
ICEL
C339
C340
c6o2.5
ICEL
Appendix
3107
C105*
0105
3120
C114*
C114
3124
c116*
0116
3142
C119*
C119
3154
C602*
c602.5
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 FCRET -- 6
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
Electrical and Power-Generating Equipment
ICEL
1201 C201*
1202 C202*
1210 C203*
1250 C604*
1255 C204*
1256 C204*
1260 C208*
1265 C204*
CoCom Doc. 700.2
as amended
ICEL CoCom Doc. 1700.1 . ICEL
Appendix as amended GL
C201
C202.1
0203
0604
C204.2
C204.2
C208
C204.1
C203*
2201 C201* C201
2210 C202* C202.2
2250 C204* C204.2
2251 C204:* C204.2
2255 C204* C204.1
2260 C041* 0401.7
2265 C205* C205
2270 C206* C206
CoCom Doc. 700.3
as amended
3201 C201*
3250 C201*
3260 C207
3265 C205; C208* --
3267 0205; C208* --
1255 C204*
1260 C208*
1266 C205*
CoCom Doc. 1700.2
as amended
2265 C205*
2270 C206*
CoCom Doc. 1700.3
as amended
3202 C202*
3256 C204*
3265 C205*
C208*
Appendix
C203
C204.2
C208
C208
C206
C202.1
C204.2
C205
C208
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Ap16d For Release 2000/08/23: CIA-RDP62-00647A000200060002-3
Index to International China Embargo List
General Industrial Equipment
CoCom Doc. 700.1
as amended
ICEL
I CEL
Appendix
CoCom Doc. 1700.1
as amended
ICEL
ICEL
Appendix
1301
0-302*
C-302
1305
c-306*
C-306
1302
c-64o*
c-64o
1321
C-318*
C-318
1305
C_3o6*
C-306>.
1322
C-313*
C-313
1310
C-323*
C-323
1325
C-31Q*
C-310
13
-
-
C-303*
C-303
1350
C-321*
C-321
13
15
0-307*
C-307
1354
C-328*
C-328
1321
C-318*
C-318
1355
C-326*
0-326
1325
c-3 10*
C-310
1380
c-387*
C-337
1330
C-32Q*
C-320
1385
c-636*
c-636
1331
C-320*
C-320
1386
c-oo1*
c-ool.64
1332
C-320*
C-320
1387
c-636*
c-636
135 0
C-321*
C-321
1351
C-309*
c-309.1
OoCom Doc. 1700.3
1355
C-326*
C-326
as amended
1360
C-322*
C-322
1374
c-636*
C-636
X302
C-302*
C-302
1375
C-324*
C-324
3323
C-3J.0*
C-310
1360
C-337*
C-337
1381
C-309*
C-3093
1385
C-438*
c-638
1386
C-001*
c-ooi.64
1387
c-636*
c-638
1388
C-526*
C-526
1390
c-64o*
c-640
1395
C-325*
C-325
CoCom Doc. 700.2
as amended
2301
C-308*
C-308
2325
C-310*
C-310
2326
C_319*
C-319
2350
C-309*
0-309.2
2351
C-322*
C-322
2354
C-328*
C-328
2355
C-329*
0-329
2375
c-636*
c-636
CoCom Doc. 700.3
as amended
3301
3321
3323
3351
3374
3380
3381
3385
c-640
C-311
C-310*
C-309*
C-636*
C-316
C-317
C-64o*
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 ApO&V9ffFor Release 2000/08/23 : CIA-RDP62-00647A0002'00060002-3
Index to International China Em.._.rgo List
Transportation Equipment
CoCom Doc. 700.1
ICEL
CoCom Doc. 1700,1
ICEL
Appendix
as amended
ICEL
Appendix
as amended
1401
C-401-
0401.1
1401
0401*
C401.1
1405
C-401*
0401.2
1405
C401*
0401.2
1410
C-401'
0401.3
1410
0401'
0401.3
1415
C,4cl*
0401.4
1415
0401-
0401.4
1425
C-401%
0401.7
1416
C401*
0401.4
0401.5
430
1
c-605'
C605
6
-
1435
C-401*
0401,7
1417
0401'
-
C401.
1450
C-403*
C403
1425
0401-,
,
C401-7
1470
0404
C404.2
1430
0605*
0605
1475
C-404*
0404.3
1435
04013,
0401.7
01
7
1480
C-404*
0404.4
1441
C401*
.
04
1485
C-401*
0401.8
1450
C403*
0403
1490
C607*
C407
1471
1481
0404*
Ch.06*
0404.1
0406
CoCom Doc. 700.2
1485
C401*
0401,8
as amended
2
1700
Doc
2401
C-402*
C402
.
.
CoCom
as amended
2405
C-401',
0401.2
2415
C401~?
0401,6
2401
C402*
C402
2
1
2440
C-401*
0401.7
2405
0401*
.
040
6
1
2470
C-404%,
C404.1
2415
0401':
.
040
6
2475
C-405*
0405
2416
C401*
0401.
2480
c-406*
0406
2450
0403-`
C403
2479
0404
0404.2
CoCom Doc. 700.3
as amended
CoCom Doc. 1700.3
mended
3450
C-403'
as a
01*
6
C401
3451
C-403*
3415
C4
.
2
3470
C-404?
3430
C602*
1y
C60
3471
C-404*
3441
C40
3475
C-404
3470
0404*
0404.1
2
0
3477
0405*
3472
0404
4.
04
3485
0-602*
3474
3477
C404*
C405*
0404.3
0405
3479
0404*
C406.4
3481
C406*
0406
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : tP62-00647A000200060002-3
Index to International China Embargo Ust
Electronics and Precision Instruments
CoCom Doe. 700.1
as amended
ICEL
ICE.L
lppendix
CoCom Doe. 700.1
as amended
ICEL
ICEL
'ippendix
1501
C-501*
C-501
1583
C-543^
C-543
1502
C-502-"
C-502
1584
C-5443"
C-544
1505
C-513,"
C-513
1585
C-908*
C-908
1507
C-503*
C-503
1586
C-5453"
C-545
1509
C-508*
C-508
1587
0-6423"
C-642
1510
C-509?
C-509
1589
C-531*
0-531
1512
0-508*
C-508
1590
0-5463"
C-546
1514
C-510
C-510
1591
C-5473
C-547
1515
C-508*
C-508
1592
C-5487
C-548
1516
C-5o4'*
C-504
1593
C_549"
C-549
1517
C-505%"
C-505.1
1594
C-5303"
C-530
1518
C-511^
C-511
1596
C-558"
0-558
1519
C-506-,
0-506
1598
C-559",
C-559
and
and
1599
C-525"
C-525
C-5073"
C-507
1520
C-505
C-50.2
CoCom Doc. 700,2
1521
C-514*
C-514
as amended
1522
C-5303"
C-530
1525
C-520T
C-520
2517
C-505*
0-505
1528
C-530;;
C-530
2519
C-507*
C-507
1531
C-530-*
C-530
2521
0-5183"
C-518
1532
C-5303"
C-530
2522
C-519"
C-519
1533
c-53271
0-532
2535
C-515*
C-515
1537
C-5173"
0-517
2541
0-528
C-528
1541
C-5237
C-523
2544
C-526-"
C-526
1544
0-5283"
C-528
2545
C-521*
C-521
1545
0-5283"
C-528
2546
C-521-"
C-521
1548
C-529-`
C-529
2570
C-551;"
C-551
1549
C-5243"
C-524
2580
C-5523
C-552
1552
C-527*
C-527
1555
C-522T
C-522
CoCom Doc. 700.3
1558
C-521%"
C-521
as amended
1561
C-536;"
C-536
1563
C-533*
C-533
3519
C-5073
-
1565
C-534-"
C-534
3525
C-506*
-
1567
C-547^
C-547
and
1569
C-5353"
C-535
C-5073"
-
1571
C-5373
C-537
3 526
C-520="
-
1573
C-530;:
C-530
3535
C-516
-
1575
C-539*
C-539
3561
C-5303
-
1577
C-907
C-907
3580
C-530*
-
1578
C-540;:
C-540
3581
C-5523;
1579
C-542;"
C-542
1582
C-3303
C-330
SECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Relea-se 2000/08/23 : 44 62-00647A000200060002-3 10
Index to International China Embargo List
CoCom Doc. 1700.1
as amended
ICEL
ICEL
:> endix
CoCom Doc. 1700.2
as amended
ICEL
IC EL Appendix
1501
C-501-
C-501
2568
C-55011 ~
C-550
1502
C-502'
C-502
2580
C-552':
C-552
1507
C-503;:
C-503
1509
C-508
C-508
CoCom Doc. 1700.3
1510
C-5095
C-509
as amended
1514
C-510%
C-510
1516
C-504
C-504
3517
C-505-
C-505.1
1517
C-505'
C-505.1
3519
C-5o&c
C-5o6
1518
C-511*
C-511
and
an 11
1519
C-507%
C-507
C-507-
C-507
1520
C-505*
C-505.2
3522
C-519-
C-519
1521
C-514;*
C-514
3529
C-530-
C-530
1525
C-520-%
C-520
3535
C-516
-
1529
C-530
C-530
3544
C-521*
C-521
1533
C-532*
C-532
and
and
1537
C-517-,
C-517
C-528
C-528
1541
C-523*
C-523
1544
C-528-=
C-528
1 545
C-528,
C-528
1548
C-529*
C-529
1549
C-524*
C-524
1555
C-522,
C-522
1558
C-521-,
0--521
1559
C-521**
C-521
1563
C-53311
C-533
1565
C-534'
C-534
1571
C-5375
C-537
1572
C-538;
C-538
1577
C-907'
C-907
1579
C-542,,
C-542
1582
C-330*
C-330
1584
C-544-
C-544
1585
C-908%,
C-908
1587
C-642-,
C-642
1589
C-551%,
C-551
1590
C-5463:
C-546
1591
C-547?
C-547
1593
C-549"1
C-549
1594
C-530`
C-530
1598
C-559*
C-559
' T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 SCf'ACRB!42T00647A000200060002-3
International China Embargo List
Metals, Minerals and their Manufactures
CoCom Doc. 700.1
as amended
ICEL
ICEL
Appendix
CoCom Doc. 700.3
as amended
ICEL
ICEL
Appendix
1601
0601*
C601
3635
0609
1605
0602*
0602.1
3650
C619*
1615
0603::
0603
3651
C620
1620
c625*
0625
3655
C622*
1630
0602%,
0602.3
3660
c626
1631
C6o6*
c6o6
3663
C643
1635
0602*
0602.4
3665
C629
1636
0608*
c608
3670
0634
1641
C610*
C610
3680
0639*
1645
C611*
C611
3690
C642
1646
C612*
0612
1648
C613*
C613
CoCom Doc. 1700.1
1649
C614*
0614
as amended
1650
C615*
0615
1653
C618*
0618
1601
0601*
C601
1658
C623*
C623
1605
C602*
0602.1
1661
C624*
C624
1615
C603*
C603
1666
0627:,
0627
1630
C602*
c6Q2,3
1667
0628-*
0628
1631
C6o6*
C6o6
1668
C630*
C630
1635
0602*
0602.4
1670
C631*
C631
1636
0608*
C608
1671
c632*
0632
1648
c613*
C613
1672
C617*
0617
1649
0614*
0614
1675
C633*
0633
1650
0615*
0615
1679
0635*
C635
1653
C618*
c618
1680
C641-14-
C641
1654
C621*
C621
1691
0641;:
0641
1655
C622*
C622
CoCom Doc. 700.2
1658
C623*
0623
as amended
1661
C624*
C624
1668
C630*
0630
2601
0601*
C601
1670
C631*
C631
2610a
0602*
0602.5
1671
C632%*-
C632
2610b
0625*
C625
2630
C602*
0602.2
CoCom Doc. 1700.2
as amended
2635
0600*
C608
2640
06163:
0616
2601
0601%:
C601
2650
C61%**
0619
2635
C6o8::
C608
2655
621*
0621
2671
C637*
C637
2666
0632::-
0632
CoCom Doe. 1700.3
2667
0630*
C630
as amended
2671
C637*
C637
700
CoCom Doc
3
3601
C601*
--
.
.
as amended
3634
0602*
0602.4
3640
c616*
c616
3601
0601*
3641
0610*
C610
3610
c602*
3650
C619*
0619
3625
C602y
X652
0615*
C615
3630
0602=,,
3654
0621:
c621*
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 SCfADPt2T00647A000200060002-3 12
International China Embargo Lis.
Chemicals and Petroleum Products
CoCom Doc. 700.1
as amended
ICEL
ICEL
Appendix
CoCom Doc. 700.1
as amended
ICEL
ICEL
Appendix
1701
C701*
0701
1793
3`7753
C775
1702
07753E
0775
1796
C788*
C788
1703
0702*
C702
1704
C747*
C747
CoCom Doc. 700.2
1710
07483E
C748
as amended
1713
0749*
C749
1716
07523E
C752
2701
C771*
C771
1717
C707*
C707
2715
C751
0751
1719
07313E
0731
2719
07053E
0705
1720
0716'?E
0716
2721
07323E
C732
1721
0732*
C732
2725
07193
C719
1723
C786*
C786
2727
C734*
C734
1725
0733^
C733
2731
C720',
C720
1727
0734*
0734
2737
0712*
C712
1729
07353E
0735
2741
C758
C758
1731
0756*:-
C756
2742
07033E
0703
1732
07573E
C757
2751
07213E
C721
1737
07363E
C736
2752
0764'E
0764
1739
C717*
C717
2754
C714*
0714
1741
C737*
0737
2757
07653E
0765
1742
0738%:-
C737
2761
0766':
C766
1744
07393;
0739
2762
0767*
0767
1745
07603
0760
2764
C722*
C722
1747
C762*
0762
1748
07183E
C718
CoCom Doc. 700.3
1750
0708':-
C708
as amended
1751
C709y
C709
1752
07633E
0763
3701
C704
--
1755
07723
C772
3702
C773
--
1756
C701*
C701
3703
C774
--
1758
0711%E
C711
3705
0775*'E
~---
1760
07683E
C768
3709
C740
--
1761
0769-%
C769
3710
C741
--
1764
C710':
C710
3711
C742
--
1766
0770'~
C770
3712
C723
--
1770
07763E
C776
3714
C724
--
1771
0777-%
0777
3717
0706
---
1772
C778*
C778
3718
C753
--
1773
07793E
C779
3719
07053E
--
1774
0780*
C780
3720
07323E
--
1775
C781*
C781
3721
C754
--
1780
C782--
C782
3722
C755
--
1786
C783*
C783
3725
C725
--
1787
07843E
C784
3730
C715
--
1788
C785*
0785
3733
0743
--
1789
C786*
C786
3737
07123E
--
3739
C744
--
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 :SCFA-1R&62T00647A000.200060002-3 1.3
- 2 -
International China Embargo List
Chemicals and Petroleum Products
CoCom Doc. 700.3
as amended
ICEL
ICEL
Appendix
CoCom Doc. 1700.3
as amended
ICEL
ICEL
Appendix
3745
3746
3747
3748
3749
3751
3754
3758
3761
3763
3766
3770
3771
CoCom Doc. 1700.1
C745
C726
C72'7
C728
C761
C759
C730
C746
C766*
C770*
C713
C789
0790
3715
3716
3717
3720
3724
3725
3750
3752
3753
3755
3760
3761
3766
3768
3769
C7 50
0752^
0706
C732*
C733*
C725
C708*
C7633,
0721*
C772*
C769*
0766*
C713
C776*
0777*
--
0752
--
0732
C733
--
C708
C763
0721
--
C769
C766
0776
C777
as amended
3772 C778* 0778
1701
C701*
C701
1702
0775*
C775
1703
07023E
C702
1713
C749*
C749
1720
07163
C716
1725
073331
0733
1727
C734*
C734
1729
07354,
C735
1731
C756*
C756
1732
07573`
C757
1738
0712;
C712
1741
07373
C737
1742
0730^
C738
1744
07393,
0739
1748
C718*
C718
1755
C772-,*
0772
1773
0779*
0779
1774
C780*
C780
1775
0781%
C781
1780
0782'?,
C782
1781
C782*
C782
1786
C78331-
0783
1788
078531
C785
1789
0786-%
C786
1790
078731
C787
1793
C775*
C775
CoCom? . Doc. 1700.2
as amended
2764 C722* C722
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approv 5 Release 2000/08/23 : CIA-RDP62-00647A00000060002-3 14
,TT
Index to International China Embargo List
Rubber and Rubber Products
Miscellaneous
CoCom Doc. 700.1
ICEL
CoCom Doc. 700.1
ICEL
as amended
ICEL
Appendix
as amended
GL Appendix
1801
C-801*
C-801
1910
C-906*
C-906
1802
0-802--"-
C-802
1920
C-904%:
0-904
1820
C-803-
C-803.1 &
C-803.2
CoCom Doc. 700.2
1821
C-803'
C-803.1
as amended
1822
C-803*
C-803.1
1840
C-804*
C-804
2910
0-906*
0-906
1845
C-126"
C-126
CoCom Doc. 700.3
CoCom Doc. 700.2
as amended
as amended
3901
C-901
2820
0-803~*
0-803.1
3909
C-906
2821
0-803'
C-803.2
3910
C-639
COCom Doc. 700.3
as amended
3930
CoCom Doc. 1700.11
C-903
as amended
3801
C-805
--
3820
C-830
--
1910
C-906*
0-906
3840
0-806
--
1920
0-904:
C-904
CoCom Doc. 1700.1
as amended
1930
CoCom Doc. 1700.3
C-903*
C-903
as amended
1801
C-801-1h.
C-801
1820
C-803%,
C-801.1 &
3920
0-904*
C-904
C-803.2
1840
CoCom Doc. 1700.3
as amended
C-804*
C-804
3801
C-805
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647AO00200060002-3 151
S E C R E T
Index to International China Embargo List
China Special List
China Special
List
ICEL
ICEL Appendix
China Special
List
ICEL
ICEL Appendix
0001
0001* -
C790
C788
C150
0125 -
0801
C807
C151
0128* -
0820
C803*
C210
0202* -
0840
0808
C260
C203* -
0910
C905
C265
C204* -
C266
0205 -
C301
C301 -
C302
C201* -
C315
C304 -
C316
0305 -
C321 0314 -
0325 C310* -
C326 C312 -
C327 C315 -
C351 C309* -
C370 (a) c001* -
(b)
C333 -
(c)
0333
0374
0331 -
C375
0332 -
0380
0337* -
0401
0401* -
C450
0403* -
0471
0404* -
C501
C507*;0508*-
C502
0512 -
C561
C909 -
C562
0557 -
C563
0554 -
C570
0555 -
C571
0556 -
C572
C334 -
0610
0607 -
0616
c602* -
0635
C602* -
C650
C605* -
c68o
0639* -
C750
C729 -
S ECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/235: 64-ObO61-00647A000200060002-3
International China Embargo List
Administrative Principles
1. The description of any item on the List includes that item in
either new or second-hand condition.
2. When the description of any item on the List contains no
qualifications or specifications, it is regarded as including
all varieties of that item. Category and sub-category captions
are only for convenience in reference and do not affect the
interpretation of item definitions.
3. Any item (including plants) containing one or more embargoed
components should generally be treated as though it zaere on the
embargo list when the embargo component or components are a
principal element of the item in value or quantity and can be
feasibly removed or used for other purposes.
4.. The object of the embargo should not be defeated by the export of
component parts. Each country will take such action as it can to
achieve this aim, and will continue to seek a workable definition
for parts which could be used by all the participating countries.
5. So far as possible, the object of strategic controls should be
maintained by restrictions on the export of technical assistance,
design data and manufacturing technique.
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/2? :FCCA-ik 2-00647A0062200060002-3
International China Embargo List
Metalworking Machinery
17
Item No. Description Source
C-001-111V Machine tools and accessories (except those designed 000l
specially for the production of civilian hardware, such C370(a)
as - but not limited to - needle, pin, button and nail-
making machinery), as follows;
(a) Metal-working machine tools, n.e.s., and accessories
therefor;
(b) Engineers' cutting and forming tools, n.e.s.
(c) Portable hand-held power tools (pneumatic, electric,
and petrol operated) designed for metal working
C-002 Power driven can making machinery
COMM-DC - /- ''
3070
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/1B EcAaR )F 2-00647A000200060002-3 18
International China Embargo List
Chemical and Petroleum Equipment
Item No, Item Description Source
C-101- Acid (mineral) Concentrating equipment, as follows: 0-1101
(a) Complete installations;
(b) Unit components;
(c) Items of equipment specially designed therefor
C-102* Ammonia oxidation equipment, as follows: 0-1102
(a) Complete installations;
(b) Catalyzers suitable for ammonia oxidation
C-103* Antibiotics production equipment, as follows: 0-1103
(a) Complete installations;
(b) Specialized components thereof
C-lOla.* Liquid/liquid solvent extraction equipment N-1106
3110
C-105* Equipment for the production of chlorine (gaseous 0-1107
or liquid), sodium and magnesium, as follows:
(a) Complete installations;
(b) Unit components;
(c) Items of equipment specially designed therefor
C-106* High vacuum (4.5 mm of mercury pressure absolute or less) 0-1109
freeze-drying equipment as follows:
(a) Complete installations;
(b) Specialized parts, n.e.s., as follows:
centrifugal vacuum spin-freezing apparatus,
and multi-stage steam ejectors
C-107* Gas-liquefying equipment and equipment for handling 0-1110
liquefied gas, designed for operation at pres:.ures
of 300 psi (21 kg per sq cm) or over (Note: This
includes steel cylinders for compressed or liquefied
gases, whether or not with welded bottoms)
C-108* ~3uLm-,inou:ated- otcrage or transportation containers 0-3-140
for liquids or liquefied gases, 25 liters (26.L2 US
qts or 22 imperial gts) capacity or more
C-109. Hydrogen-producing equipment (water, gas, electrolytic, 0-1112
gas cracking, gas extraction processes)
C-110* Hydrogenation equipment, as follows: 0-1113
(a) Complete installations;
(b) Catalyzers suitable for hydrogenation
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 S dA0RbF -00647A000O00060002-3 19
International China Embargo List
Chemical and Petroleum Equipment
Item No. Description Source
C-111* Methanol oxidation equipment, as follows: 0-1116
(a) Complete installations;
(b) Catalyzers suitable for methanol oxidation
C-113* Equipment for the production of military explosives, N-1118
as follows:
(a) Complete installations
(b) Specialized components
C-114* Processing equipment operating at pressures over 0-1120
200 psi (14.0 kg. per sq. cm.), as follows:
(a) Complete installations;
(b) Unit components
(c) Items of equipment specially designed therefor
(including, but not limited to, autoclaves
and digesters)
C--115* Sulphur (natural) extraction equipment, as follows: 0-1123
(a) Complete installations;
(b) Unit components;
(c) Items of equipment specially designed therefor.
C-116* Sulphur burners and pyrites roasters 0-1124
C-117* Plant for the production of titanium metal N-1125
(excluding separate plant for the production of
titanium tetrachloride), as follows:
(a) Complet installations
(b) Specialized components
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
International China Embargo List
Chemical and Petroleum Equipment
Item No. Description Source
C-118-* Chemical process vessels, tanks, and vats, and piping 0-1141
and allied fixtures, made of or lined with any 0-2141
corrosion-resistant material 3140
C-119* Pipe and tubing, made of or lined with any of the 0-2142
following corrosion-resistant materials:
(a) metals containing 10% or more chromium and/or
nickel and/or silicon; metals containing 90% or
more silver or titanium;
(b) Carbon and/or graphite;
(c) Polythene; polytetrafluoroethylene; trifluorochloro-
ethylene; polyvinyl chloride; polyvinylidene chloride
resin; phenol formaldehyde;
(d) Borosilicate glass; except pipe and tubing specially
shaped for laboratory use;
(e) High-temperature fused silica or quartz.
C-120* Distillation equipment (industrial), as follows: 0-2101
(a) Fractionating, rectifying, and dephlegmating columns; 3101
and parts therefor
(b) Destructive distillation equipment, and parts;
(c) Stills designed to operate at absolute pressure of
5 mm and lower of mercury; and parts therefor
C-121 Evaporators, multiple-effect
3105
C-122 Driers for chemical processes, as follows: 3102
(a) Continuous screen;
(b) Cylinder;
(c) Drum;
Rotary;
M Spray;
(f) Vacuum.
0-123 Drums (metal, empty) of 5 or more United States or 3143
United Kingdom gallons capacity (20 liters), made of
or lined with any corrosion-resistant material (except
containers designed for the transport of milk),
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 ~CiAC-RRPE6~,00647A000-200060002-3
International China Embargo List
Chemical and Petroleum Equipment
Item No. Description Source
C-124. Drums (metal, empty) of 55 US gallons (45 Imperial) 3144
gallons, 200 liters) capacity or more
C-125 Containers of the "jerry cane or similar type, n.e.s., C150
i.ee, containers of 4 US gallons (15 liter) capacity or
more, equipped with handles and water-tight lids, and
suitable for use in storing or transporting petroleum
Cl26* Oil well drilling and exploration equipment 0-1150;
(Interpreted to include the following:) 0-1845
(a) Casinghead and Christmas tree assemblies;
(b) Cementing equipment;
(c) Coring equipment;
Gun perforating equipment;
Photoclinometers;
Power pumping units; bottom hole pumps and
working barrels;
Blowout preventers;
Drill bits (rock bits);
Draw works and rotary tables;
Well logging instruments and equipment;
Drill collars, tool joints, Kellyts and Kelly
substitutes;
Crown blocks, traveling blocks for oil derricks;
Rotary drilling hose, high pressure (with test
pressure 3,000 psi (210 kg. per sq. cm.) and over
C-7.27#
Oil and natural gas production equipment, as follows:
(a) Units for treating, separating and stabilizing, and
natural gas extraction;
(b) Complete plants including any of the above units
(c) Items of equipment spedially designed therefor
(including, but not limited to the followings
stabilizing, absorpiton, and stripping vessels,
separators; condensers)
C-128* Petroleum refinery equipment 0-1151; 0-1153;
0-1155; C151
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647AO00200060002-3 22
SECRET
International China ;noargo List
.,lectrical and Power Generating Equipment
Item No. Item Description
C-2014 Electric furnaces and electrical component parts 0-1201;
therefor, as follows: 2201;
(a) Induction melting furnaces, including 3201;
,generating capacity of 480 cycles and over; C-302
(b) Direct or indirect are furnaces
(c) Sub:.aerged are and direct resistance furnaces
(d) Induction heat treating furnaces, including
generating equipment of 480 cycles and above
(e) Resistor melting furnaces and resistor heat-
treating furnaces
C-202 Welding machines and equipment and parts therefor 0-1202
(including electrodes-rod and wire) 0-2210
C-210
C-203* Searchlight control units N--1210
C-204**' Internal combustion engines 0-1255
0-1256
0-2250
0-2251
3 250
-2255
C-205* Power equipment, as follows: C-266;
(a) ?,quipuent, n.e.s., for electric generating, 3267;
transforming, rectifying and converting, 3535;
transmission, and power distribution; control 0-2265
gear and accessories, n.e.s.; substation equip- 3265
went, n.e.s.; and parts, n.e.s., for the foregoing:
(b) Plant for the production of fuel gas;
(c) Boiler house plant for use with sub-items (a) and
(b) above.
C-206' Turbines over 300 hp (except those designed for 0-2270
driving electric generators)
C-207 'later-tube boilers, 80,000 pound-hours (36,300 3260
kilo-hours) steaming capacity and above (excluding
marine boilers),
C-20&. Electric motors and controls as follows: C-260;
(a) Electric motors, all types 0-1260;
(b) Automatic and semi-automatic equipment for the 0-2265;
starting, stopping, reversing and speed control 3265
of electric motors of 60 hp (45 IC. I.A. at unity
pourer factor) and over, and specially designed
parts.
SEC R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/235: 81R-F D 62-00647A000200060002-3
.international China Embargo List
23
General Industrial Equipment
Item No. Description Source
C-301 Foundry Plant C-301
C-302* Casting equipment, as follows: 0-1301
(a) Die-casting and centrifugal casting machines
(b) Equipment or plants for continuous casting of metals
into partially processed mill product forms
C-303* Sintering equipment for metallurgical purposes 0-1311
C-304 Hard-chrome plating plants (except small barrel-type C-315
electro-plating plants for decorative purposes)
C-305 Metal-spraying equipment C-316
c -3o6* Metal rolling mills, all types; and controls therefor 0-1305
C-307* Tinning units, electrolytic-automatic continuous 0-1315
C-308* Furnace equipment: pressure-top equipment (i.e., top 0-2301
equipment for blast furnaces designed to facilitate the
retention during the recharging process of the pressure
and temperature generated during the preceding heat for
use with the new charge)
C-309* *ung machinery C-351; 0-135?o-138?
0-2350; 3351; 3150
C-310* Excavators, power shovels and cranes, as follows: CC 225; 00 3253
a) Excavators
b) Power shovels
c) Power cranes of the non-excavator type, full
revolving, mounted or unmounted (including floating
and railvray types)
(This category covers all
such cranes of the shipyard, railway and construction
types)
C311
Road and airport machinery of the following 'kinds:
di
l
3321
ng
u
(a) Concrete mixers (stationary and portable, inc
truck and trailer-mounted) and concrete transport
truck mounted agitators, capacity 18 cu. ft. (0.5 cu-m)
and over;
(b) Concrete pavers, paving spreaders, and finishers;
(c) Bituminous mixing outfits, spreaders, pavers, and
mixer-paver combinations;
(d) Crushing and screening outfits; mobile and semi-
portable knockdown types;
(e) Sub-graders and fine-graders;
(f) Self-propelled road graders;
(g) Self-loading scrag rs (automatic), self-propelled and
, 1] sh t (This excludes hand-operated types) .
B88
S E C R E
Approved for Release
108723: CIA-RDP62-00647A000200060002-3
 S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647AO00200060002-3
international China Embargo Lis
General Industrial Equipment
Item No. Description Source
C-312 Bull-dozers; angle-dozers; trail builders c-326
C-313* Soil compacting equipment, as follows: N-1322
(a) soil compactors with pneumatic tired vheels,
vibrating type, of 30,000 lbs. or (13 metric tons)
net vehicle weight or over
(b) pneumatic tire casings for such soil compactors
(whether or not mounted on the vehicle) of 16.00 x 21
size or over, and rated 36 ply or over
C-314 Road-rollers, self-propelled, tandem and three-wheel C-321
steel-tired types, 8 ton unballasted weight or over
C-315 Spray-guns, air-operated types capable of placing 132 0-327
cu. ft. (0,38 cu. meters) or more of wet mixture of
cement and sand per hours; and accessories therefor
c-316 Conveyor belting
C-317 Crushing equipment, as follows:
(a) Crushers, grinders, and pulverizers (all types except
for food processing)
(b) Colloid mills
C-318*
C319*
3380
3381
Tractors, diesel or gasoline povtiered, 60 belt hp and over 0-1321
(50 drawbar hp and over)
(a) wheel
(b) Tracklaying
Off-the-road equipment, as follows: 0-2326
(a) Off-the-road trucks, wagons, trailers of over 10 cu. yd.
(7.6 cu. m.) struck capacity
(b) Off-the-road trucks, wagons, trailers of 10 cu. yd.
(7.6 cu. n) struck capacity and under
C-320 Rubber making machinery as follows: 0-1330; 0 -1331
(a) Calenders (rubber tiorking) with 3 or more rolls 0-1332
And capable of handling fabric 55" (140 cm) or over
(b) Master batch mixers, with automatically controlled
tine cycle, chamber volume 130,000 cu. cm. or more
(c) Tire-curing presses, single or multiple cavity,
capable of accommodating tire molds of a total
outside depth of 10" (25.4 cm) or over
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
International China. Embargo List
General Industrial Eouipment
Item No.
Description
Source
C-321*
Carbon black manufacturing plants
0-1350
C-322*
Synthetic fiber manufacturing equipment, as follows:
(a) Filament extrusion and spinning macaincs
(b) Spinnerets made of platinum and/or tantalum
meta"-..,3 and/or alloys, capable of producing
yarns of 500 denier or more;
(c) Spinnerets made of stainless steel capable of
producing yarns of 210 denier or more
0-1360;
2351
C-323*
Separators (electrostatic) having a voltage of
more than 1,000 volts across the air gap; and parts
0-1310
C-324*
Air conditioning units (self-contained), with a
capacity of over 8,000 British Thermal Units per hour
0-1375
C-325*
Precipitators (electrostatic), capable of removing
90 percent or more ( by blackness test) of all air-
bor-rae particles down to sizes as small as 1/250,000
of ?n inch.; and specialized parts therefor.
0-1395
C-326*
Radio valve manufacturing machinery
0-1355
C-327*
Molding machines for plastics (extrusion, injection
and other)
0-1146
C-328*
Cable-making machinery for making coaxial cable, as
follows:
(a) Machines used for applying insulating separators
to the inner conductor of air spaced coaxial
electric cables;
0-2354
(b) Machines used for applying metal strip or sheet
to form the outer conductor of coaxial electric
cables.
C-329* Cable-making machinery for making multipair electric 0-2355
cables for tele-communication purposes as follows:
(a) Machinery for applying insulating material to
conductors;
(b) Machinery for laying conductors together and/or
for applying an insulating, separating, binding,
or identifying material thereto;
(c) Machinery for laying up conductors, pairs, quads,
etc., into layers to form the complete cable core
or part thereof.
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
International China Embargo List
General Industrial Equipment
Item No. Description Source
C-330:: Optical curve generators (grinders, surfacers, 0-1582
and polishers) and parts, capable of producing:
(a) Aspherical curves;
(b) Toric, cylinder, or spherical surfaces on
glass or other material without the use of
mating surfaces or laps.
C-331 Jacks, 10-ton capacity and over C-374
C-332 Materials-handling equipment, as follows: C-375
(a) Fork-lift trucks;
(b) Platform trucks;
(c) Other industrial-type trucks, trailers, and
stackers.
(Note: The above sub-paragraph (c) covers only
equipment specially designed for materials
handling, such as those equipped with
crane booms and winches)
C-333 Portable hand-held poor tools (pneumatic, electric C-370
and petrol operated) designed for:
a) Mining and quarrying
b) Transportation and transportation-servicing(rail-
roads, locomotives and rolling-stock, ships,
planes and motor transport).
C-334 Electronic heating instruments used in the metallur- C-572
gical industry, n.e.s.
C-335* Heat exchangers (tubular) for industrial processes,
and components therefor.
C-336* Water treatment equipment, industrial, except
stationary equipment for the treatment of drinking
water.
C-337% Compressors and blowers, as follows:
(a) Designed to operate with a delivery pressure
exceeding 110 psi, or i7Ydth a capacity exceeding
250 cfm free air delivered;
(b) Compressors, n.e.s. and parts, regardless of
delivery pressures and capacities, when fabri-
cated of, or lined with any corrosion-resistant
material.
12 26
0-2110
0-1127;
3127
0-1130;
0-1380
0-1384;
C-380
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Rele se 2000/08/23 : CIA-RDP62-00647A000'200060002-3
S E C R E T
International China Embargo List
General Industrial Equipment
10
27
Item No. Description Sonres
C-338* Pumps (except vacuum pumps) as follows: 0-17.31; 0-2136.
(a) delivering liquids separately or in combination 3131; N-1131
with solids and/or gases, designed for working
pressures of 75 psi (5.25 kg. per sq. cm.) or over
or fabricated of or lined with any corrosion-
resistant material;
(b) bodies and rotors of centrifugal or rotary pumps,
fabricated of, or lined with, any corrosion-
resistant material;
(c) designed to move molten metals by electro-magnetic
forces.
Note: This does not include diesel and fuel injection
pumps, or pumps destined for closed hydraulic
circuits, such as are required in conjunction
with hydraulic presses.
C-339* Vacuum pumps (and parts), all types (including
mechanical diffusion and ejector) which (a) are
designed to produce a vacuum of 50 mm of mercury
pressure absolute or less; or (b) regardless of
vacuum produced, are fabricated of, or lined with, any
corrosion-resistant material.
C-340* Val-7a,- and cocks, as follows:
(a) Valves and cocks with pressure parts wholly made
of or wholly lined with any corrosion-resistant
material, except the following types of valves
when made of or lined with corrosion-resistant
0-1132;
0-2130
0-1133;
0-1134
0-1135;
0-2131
0-2132
materials other than molybdenum, or alloys (as de-
fined in Interpretative Note I (ld) or nickel metal
or alleys (as defined in Interpretative Note I (la).
(i) Check, non-return and float valves;
(ii) Pressure relief valves designed for working
pressures of less than 300 psi (20 kg. per sq.
cm.);
(iii) Valves and cocks for domestic household use,
and those specially designed for milking
machines and for electrical household refri-
gerators and home freezers.
(b) Valves, controlled automatic types as follows:
Any pipe valve having partially or Taholly integral
with it a mechanism actuated by hydraulic, pneumatic,
mechanical, electrical, or other means -4iich
regulates or controls its operations, except (i) check,
non-return, and float; (ii) pressure relief valves
designed for working pressures of less than 300 psi
SECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For ReleaSe 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
International China Embargo List
General. Industrial Equipment
Item No. Description
C-340* (21 kgo per sq* cm.); and (iii) valves
(cont'd) specifically designed for milking machines and
for electric household refrigerators and home
freezers.
(c) Pipe valves, n.e.s. designed for working
pressures of 300 or more psi (21 kg. per sq. cm.).
28
Source
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A0001O0060002-3
S E C R E T
International China Embargo List
Transportation Equipment
2 9
Item No, Description Source
C-401* Watercraft, and important components C-401
C-402* Dredges and specialized dredge equipment and components, 0-2401
such as grabs, buckets, cutters, ladders, centrifugal
pumps, and floating and shore pipelines
C-403* Motor vehicles and equipment, as follows: 0-4450
(a) Motor vehicles (including tractors, trailers and 0-3451
motor cycles), except the following: scooters;
tricycles under half ton loading capacity; and private
touring (passenger) cars designed or constructed to
carry not more than 6 persons.
(Note: The foregoing exclusion does not apply to the
following, even if apparently designed or constructed
to carry not more than 6 persons; crew cars (personnel
carriers); station wagons; utilities; pick-ups; buses;
kit cars);
(b) Chassis') components, and spares for the above vehicles;
(c) Servicing equipment and materials for the above vehicles.
C-404*
Railway rolling stock, and parts therefor
C-471
C-405*
Railway
0-2475
0-3477
C-406*
Railway signal systems, as follows:
N-1481
(a) Centralized traffic control (CTC) system of railway
0-2480
C-407*
signalling controlled by code impulses; and parts
specially designed therefor
(b) Automatic (block type) railway signal systems, and
parts specially designed for such systems
Landing mats for aircraft
0-1490
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S CRET
INTERNATIONAL CHINA EMBARGO LIST
ELECTRONICS AND PRECISION INSTRUMENTS
Item No, Description Source
C-501* Communication equipment specially designed for use N-1501
in aircraft or for communication with aircraft; and
specialized parts therefor.
C-502* Communication equipment of a kind using infra-red N-1502
radiation or ultrasonic waves; and specialized parts
therefor.
C-503* "Jamming" apparatus (i.e., apparatus specially designed N-1507
to jam or otherwise interfere with radio reception);
and specialized parts therefor.
C-504* Radio receivers, panoramic (being receivers which N-1516
search automatically a part of the radio-frequency
spectrum and indicate visibly the signals received);
and specialized parts therefor.
C-505* Radio communications equipment as follows: C-501
(a) Radio transmitting apparatus and components N-1517
therefor (including non-specialized components); N-1520
(b) Radio communication receivers and components 0-2517
therefor (including non-specialized components),
except domestic radio receivers.
NOTE - Non-specialized components include-all
types of electronic valves (tubes),
capacitors, resistors, coils, antennae
and power supplies. Export licenses
can be granted when small cuantities of
replacement parts for domestic radio
receivers are involved and when, in
accordance with the conditions and
procedure of CoCom Doc. 782, the exporting
country can justify that there is no doubt
as to their civilian end use.
C506* Telephone equipment, as follows: 0-1519
(a) Carrier frequency telephone terminal equipment, C-501
and carrier frequency intermediate repeater or 3525
amplifier equipment, which incorporate designs,
components, or construction techniques specially
suitable for military field application;
(b) Specialized components and subassemblies there-
of e.g., crystal lattice filters)
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
SECRET
.t CTR,ONICS AND PRECISION INSTPUM TTS
Item No, Description
(c) Telephone switchboards and other telephone
instruments, n.e.s. (except domestic
telephone instruments)
(d) Telephone cable of any type containing more
than one pair of conductors
(e) Telecommunications cable, n.e.s.
C507* Telegraph equipment, as follows:
(a) Voice frequency telegraph terminal
equipment of all types, as follows:
(i) Apparatus used for converting the output
from telegraph sending instruments to
audio frequencies for transmission over
electric circuits;
(ii) Apparatus used for converting incoming
telegraph signals on an audio frequency
basis into a form suitable for and
distribution to, telegraph receiving
instruments;
(iii) Channel filters and components thereof;
and specialized components and sub-
assemblies specially designed for
incorporation in voice frequency tele-
graph terminal equipment.
(b) Telegraph equipment (machines) as follows:
(1) Mechanical, electromechanical, or
electronic equipment
used to
translate the information contained in
written text, printed matter, line or
half-tone drawings, maps, diagrams or
photographs into electrical wave-forms
suitable for transmission over communi-
cation circuits;
(ii) Equipment designed to accept such
electrical wave-forms and display the
information from them in visible form;
(iii) Specialized component parts and accessories
fir such equipment.
(c) Telegraph cable of any type containing
more than one pair of conductors.
(d) Telecommunication iahle, n.e.s.
0-2519
N-1519
3519
3525
C-501
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A0002b0060002-3
ELECTRONICS AIJD PRECISION INSTRUMENTS
Item No. Description
Source
C-508* Location apparatus as follows: N-1509
(a) Apparatus of a kind used for detecting 0-1509
objects or for determining the relative 0-1512
direction, position, or motion of objects 0-1515
by means of the constant velocity or recti-
linear propagation characteristics of electro-
magnet waves having frequencies less than
4 x 10-L+ cycles per second (0.75 microns)
(except radio direction finding equipment
of a kind used at frequencies not -greater than
1.5 megacycles per second);
(b) Specialized parts and accessories of such
apparatus;
(c) Specialized equipment for testing or cali-
brating such apparatus.
C-509* Location apparatus, under water: apparatus for detecting N-1510
or locating objects under Bator by magnetic or acoustic or
ultrasonic methods (except marine d9 th sounders of a kind
used solely for measuring the depth of water: or the distance
of submerged objoots vertically below the apparatus), and
specialized components of such apparatus,
C-510* Pulse modulators capable of providing electric N-1514
impulses of peak power exceeding 10 kw; and
pulse transformers and pulse-forming equipment
being specialized parts of such modulators.
C-511* Telecontrol equipment suitable for controlling pilot- N-1518
less aircraft and guided weapons.
C-512 Detection apparatus, as follows:
(a) Ultrasonic detectors, n.e.s.;
(b) Electrocardiographs (except those being
exported in small quantities where the
exporting authorities have made sure that
the equipment is intended for medical
purposes and report the exports in accordance
with the "exceptions" procedure in paragraph
3 of Document 732).
0-513*
Ionosphere recording apparatus., fully automatic.
C-1505
C-514*
Amplifiers, any of the following:
I T-1521
(a) Designed to operate at frequencies in excess
of 100 m/cs;
(b) Tuned amplifiers having a bandwidth (defined
as the band of frequencies over which the power
amplification does not drop to less than one-half
of its maximum value) which exceeds 5 m/cs or 10%
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
33
Item No. Description
C-514-
(continued)
of the mean frequency, whichever is less.
(The mean frequency is defined as the arith-
metic mean between the frequencies at which
the power amplification is one-half of its
maximum value.)
(c) Untuned amplifiers having a bandwidth, as
defined in sub-item (b) above, which exceeds
5 m/cs per second;
(d) DC amplifiers having a noise level (referred
to the input circuit) of 10-16 watts or less
and or a zero drift in 1 hour corresponding to
a change in input power of 10-16 watts or less;
(e) Capable of a total power output in excess of 500
watts at any frequency or frequencies between 15
k/cs per second and 200 k/cs per second.
Source
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647AO00200060002-3
S E C R E T
ELECTRONICS AND PRECISION INSTRUI R S
Item No. Description
C-515* Transformers, n.e.s., and parts, as follows:
(a) Inter-stage and modulation transformers;
(b) Transformers made from electrical steels
having a core less of 1.7 watts or less per
kilogram at 10,000 gausses and 50 cycles per
second;
(c) Transformer and choke laminations and core
assemblies vrith a core loss of 1.0 to 1.7
(both inclusive) watts per kilogram at 10,000
gausses and 50 cycles per second.
34
Source
C-516 Reactors (made of materials covered by item 1631), 3535
n.e.s., as follows: C266
(a) transformers;
(b) chokes and coils.
C-517* Special tuned circuits, as follows:
(a) Electromagnetic vraveguides, resonant circuits,
and radiators of a kind used at frequencies
exceeding 600 megacycles per second;
(b) Articles or equipment incorporating or designed
to be connected to or to be incorporated in, any
such wave-guide, circuit, or radiator.
C-518* Subminiature electronic circuit components, as 0-2521
follows :
(a) Other than those specially designed for, or
intended for, medical hearing aids;
(b) Specially designed for, or intended for, medical
hearing aids.
C-519* Capacitors, as follows: 0-2522
(a) Fixed capacitors in excess of 0.5 microfarads, N-3522
having DC working voltage in excess of 1,000 volts;
(b) Radio-frequency capacitors, either fixed or variable,
rated in excess of 5 amperes at 1,000 kcs;
(c) All vacuum and gas capacitors;
(d) Ceramic dielectric capacitors, or parts thereof,
having a declared tolerance of temperature coefficient
of plus or minus 20 percent of the nominal capacitance
or less;
(e) polyethylene tetraphthalate dielectric capacitors; and
(f) tantalum electrolytic capacitors
C-520* Coaxial electric cable as follows: N-1525
(a) all types suitable for the transmission of frequencies 3526
of 100 or more kilocycles per second;
(b) all types with polytetrafluoroethylene or
polytrifluorochloroethylene dielectric
Approved For Release 2000/08/23 q dA?F# f i-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
SECRET
35
ELECTRONICS AND PRECISION INSTRUMENTS
Item No. Description Source
C-5;21* Valves (tubes) electronic, of the following kinds 0-1558
(and specialized parts therefor): 0-2545
(a) Those of a kind used with a potential 0-2546
difference exceeding 9,000 volts between N-1559
electrodes;
(b) Those of a kind used at frequencies of 100
megacycles or more per second;
(c) Those of a kind that can be passed through
a circular hole 2" (1.27 cm) in diameter;
(d) Those designed to withstand severe mechanical
vibration or shock;
(e) Capable of conducting a peak current greater
than 10 amperes;
(f) Capable of continuous plate dissipation of 150
watts or over.
C-522*
Image converters and electronic storage tubes of
N-1555
all kinds, including television camera tubes.
0-1555
C-523*
Cathode-ray tubes, as follows:
(a) With screen afterglow longer than 2 second;
(b) With writing speeds of more than 3,000 km
per second;
(c) With 2 or more electron guns.
N-1541
C-524*
Photomultiplier tubes; and specialized parts therefor.
N-1549
C-52*
X-ray tubes 1,000 PKV and over.
0-1599
C-526*
Rectifier tubes of the high-vacuum or hot cathode
mercury vapor type, having peak inverse voltages
in excess of 2,000 volts with average current
capacity of 1/4 ampere or over.
0-2544
C-527*
Rectifier or amplifier tubes, cold cathode type.
0-1552
C-528#
Crystal diodes and transistors.
0?-1544
0-541
C-529*
Photoelectric cells, as follows:
(a) Photoelectric cells with a peak sensitivity
at a wave length longer than 7,000 Angstrom
units;
(b) Phototransistors (photo-conductive cells) with
a response time constant of one millisecond or
less measured at the temperature at which the
time constant is a minimum
0-1548
(Note: The time constant is defined as the time taken
from the application of a light stimulus for the
current increment to reach a value of 1-l/e times
the final value (1 e,, 63% of the final value).)
Approved For Release 2000/08/23 : Cgk-nQPf,2fpg647A000200060002-3
 Approved For Release 2000/08/233 CJAF Pl 6-00647A006-200060002-3
36
ELECTRONICS AND PRECISION INSTRUkTNTS
Item No.
Description
Soireo
N-7L59
0
C-530*
Measuring instruments, as follows:
N- 5
4
(a) Electrical instruments, as follows:
0-1522
1) apparatus for measuring impedance, admittance, capaci-
0-1573
tance, or inductance at a frequency of 100 megacycles
3529
per second or more;
3561
2) decade attenuators giving readings, accurate to less
than plus or minus 5% of the indicated value expressed
3510
in decibels, at frequencies of 1 megacycle per second or above;
3) equipment for measuring permittivity, and/or power factor
of dielectrics at frequencies of 1 megacycle per second
or above;
4) radio-frequency field strength measruing equipment;
5) frequency measuring equipment with an accuracy better
than plus or minus 0.01% at frequencies over 30 kilo-
cycles per second;
6) electronic stabilized power supplies delivering a DC
output voltage which:
(i) varies by less than 1% of any input voltage
variation within plus or minus 20% of the nominal,
and/or
(ii) varies by less than 0.1% of the maximum rated
voltage between no load and maximum rated load;
7) those operating at frequencies exceeding 300 mega-
cycles per second;
8) antenna pattern recorders for use at frequencies over
250 megacycles per second;
9) impedance measuring apparatus (apparatus of a kind used
to measure electric impedance) at frequencies of 60
megacycles per second and specialized parts thereof;
10) voltmeters, ammeters, and microammeters (including
portable test type) - precision indicating types, with
an accuracy of 0.5 percent of full scale deflection;
11) bridges for measuring capacitance, impedance, inductance,
and/or resistance, precision types; and
12) measuring and testing equipment, n.e.s., rated for use
at frequencies of 30 kilocycles and above.
(b) Resistors, inductors, or capacitors, fixed or variable,
with a rated accuracy better than plus or minus 1% at 1
megacycle per second or any higher frequency;
(c) Apparatus for automatically sorting electronic components
in respect of their electrical characteristics.
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
Item No. Description
C-531* Resistors, temperature-sensitive (of a kind N-1589
used in bolometers or in the measurement of
electric pow*er below 10 millivratts but
excluding electric lamps)
C-532* Radio spectrum analyzers (being apparatus N-1533
capable of indicating the single-frequency
components of multifrequency oscillations);
and specialized parts of such analyzers.
C-533', Balances, as follows:
(a) Balances, electronic capable of detecting
differences in weight smaller than 10
micrograms; and specialized parts therefor;
(b) Balances of sensitivity of .01 milligrams
0-1563
or better.
C-534^
Computors, electronic (except business type
N-1565
calculating machines).
C-535*
Electrometers (except student type).
0-1569
C-536*
Absorption meters, infra red
0-1561
C-537*
Geophysical prospecting equipment, as follows:
0-1571
(a) ;eisometers;
(b) Gravimeters;
(c) Electronic or fluxgate magnetometers
(including airborne magnetometers);
(d) Complete seismic exploration recording equip-
ment, portable or designed for truck mounting;
and the following units When specifically
designed and/or designated therefor;
1) amplifiers with automatic volume control;
2 variable filters;
3 synchronized tuning-photographic recording
equipment (including recording oscillographs),
and parts specifically designed therefor;
4) Geophones; and parts specifically designed
therefor;
5) Electromagnetically-damped galvanometers;
6) Equipment for surface shooting, employing
shaped charges.
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Relea3e 2000/08/23 : CIA-RDP62-00647A000200060002-3
SECRET
ELECTRONICS AND PRECISION INSTRUMENTS
38
Item No. Description Source
C-538* Magnetic recorders and/or reproducers (other than N-1572
those designed for voice or music) and specialized
recording media, parts and components therefor.
C-539* Leak-detecting instruments (instruments capable of 0-1575
detecting small leaks of gases under high vacuum or
high pressure).
C-543* Micro-hardness testers.
0-1578
C-541* Dynamometers capable of absorbing more than 300 0-1388
brake horsepower.
0-542 Microscopes of the following kinds: 0-1579
(a) Electronic;
(b) Metallurgical - consisting of microscopes
(whether or not in combination with a camera
and mounted, or capable of being mounted, on
a rigid optical bench i.e., a metallograph (which
posses, or are capable of adaptation to include
the following:
(1) An illumination system by which the light
beam enters the microscope axially and is
projected through the objective lens to the
specimen under observation; and
(2) A tube of length which, when used with a
lens capable of magnification to 75 times
or greater, will obtain a flat field of
view wherein all parts of the specimen
under observation are simultaneously in
sharp focus.
C-543*
Cscillographs, recording.
0-1583
C-5 44*
Oscilloscopes (cathode-ray) and specialized parts,
as follows:
N-1584
(a) oscilloscopes possessing any of the following
characteristics:
(1) A bandwidth greater than 5 megacycles
(defined as the band of frequencies over
which the loss does not exceed 3 decibels);
(2) A time base shorter than 0.05 microseconds
per centimeter;
SECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 . Approved For Release 2000/08/23 : CIA-RDP62-00647AO00200060002-3
ELEC:'.RONJICS A1TD PRECISION INSTKU. :NIS
Item No. Description
(3) Containing or designed for the use of
multiple beam tubes, or those of 3 or more
cathode-ray tubes;
(4) Employing accelerating potentials in
excess of 5,000 volts;
(b) Specialized parts and accessories, as follows:
(1) Oscilloscope cameras;
(2) Amplifiers and pre-amplifiers with a
bandwidth greater than 5 megacycles
(defined as the band of frequencies over
which the loss does not exceed 3 decibels).
C-5545* Pyrometers, as follows:
(a) Optical pyrometers - disappearing filament
types;
(b) Radiation type pyrometers with sensitive
receiver consisting of either a thermocouple
(with or without protecting tube) or a
"sighting" device whereby heat is focused
on a thermopile by a lens or mirror.
C-54?~-* Micro-flash equipment capable of giving a flash of
1/100 ,000 second or shorter duration, or with a
frequency of 200 flashes or more per second.
C-54`* Spectrographs, spectrometers, monochrometers, and
associated measuring equipment, as follows:
(a) Grating types with, or designed for use with
diffraction gratings (originals or replicas,
plane or concave); and gratings therefor;
(b) Prism types:
(1) Capable of a spectrum length of 20 cros
between 9000 and 2000 Angstrom units, or
(2) Dssigned..for use with prisms having re-
fracting face 35 mm or more in width;
(c) Infra-red types, having an effective total
prism base length over 2 inches (5 cm);
(d) Recording or controlling densitometers or
other specialized equipment for the quanti-
tative assessment of spectrographic records.
(NOTE: This does not include: (1) instruments
limited to the use of replica plane:gratiUg
not exceeding 1" (2.5 ctcs) in ruled wwidth,. and
spares therefor, and (2) instruments of the
"circle" type incapable of direct measuring
to less than 5 seconds of arc.)
39
Source
0-1586
N-1591
Approved For Release 2000/08/23 :RRIMP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A00020060002-3 40
ELECTRONICS AND PRECISION INSTRUMENTS
Item No,
rescription
0-1592
C-5ts`I*
C-5
Strain auge equipx ent, electric recording;, and
bpeciaiited parts therefor:
Measuring and counting equipment as follows;
N-1593
(a) Equipment capable of measuring time
intervals of one second or less with an
error not exceeding 2% of the interval
measured or an error of 20 microseconds,
whichever is the greater;
(b) Equipment capable of counting at over
50,000 counts per second.
C_550 Electronic automatic controlling units, whether N-2568
or not including associated regulating units,
designed to regulate flow by continuous action as
a function of one or more industrial process
variables and capable of operating a regulating
valve by pneumatic, hydraulic or electric means in
response to an A,C. or D.C. voltage produced by a
measuring unit in the process stream.
(NOTE: "Controlling unit" means the unit comprising
those elements which apply control action to
the regulating unit in relation to the devia-
tion, which it determines by comparing (by
using an electronic feed back stabilised
amplifier) the desired value with the value
of the controlled condition as indicated by
the measuring unit.)
C-5.51*
Electric or electronic impulse registers or counters
designed to operate at over 20 counts per second.
0-2570
C-552
pH :peters, continuous and non,continuous, and eom
0
0-2580
; _?nents th;reof.
0-3581
SECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S ?CRET
ELEC`fHONICS AND PRECISION INSTRUMENTS
Item No. Description
40a
C-553* Gauges for measuring pressures over 100 atmospheres 0-1145
(gauge pressures of 1470 psi or 103 kg. per sq. cm.)
C-554 Measuring and testing-instruments for use in C-563
engineering workshops, n,e.s.
C-565 Surveying instruments, as follows: C-570
(a) Baseline equipment;
(b) Geodetic theodolites (first order instruments);
(c) Precise thecdolites having an accuracy better
than 4 sexagesimax seconds by direct reading;
(d) Theodolites, tacheometers and transits with a
telescope magnification of X15 or higher and
reading direct to 1 sexagesimal minute or
better;
(e) Precise levels for first-order work;
(f) Surveyors' and engineers' telescopic levels
having telescope magnification of X15 or
higher and an object glass aperture 1.2
inches (30 run) or larger.
C-'_556 Precision, scientific, and optical instruments, n.e.s., C-571
capable of being used in the development, production
and testing of military equipment.
C-557 Cartographic instruments, as follows: C-562
(a) Map making instruments for use with ground
or air photographs;
(b) Instruments for studying and interpreting
air photographs.
C-5583 Warburg apparatus for the examination of living tissues 0-1596
C-559-x- X-ray and electron diffraction equipment and accessories 0-1598
as follows:
(a) X-ray diffraction units;
b X-ray tubes designed or intended for use in X-ray
diffraction anal~sis;
(c) Powder cam ras with-'heating element for temperatures of
5000C (.9329) or abbve;
(d) Single crystal oscillating and rotating X-ray gonimeters
with X-ray film or plate holders;
(e) Electron diffraction units and specialized components
Approved For Relt~%ES d/08/23 : CIA-RDP6- 016AA(OOT200060002-3
 Approved For Release 2000/08/23 : -PP62-00647A0002D0060002-3
INTLRNATIONAL CHINA EMBARGO LIST
METALS, MINERALS, AND THEIR MANUFACTURES
Description
41
C-60l* Anti-friction bearings (ball, roller, needle) 0-1601
and parts 0-2601
0 -36-01
C-602- Iron and steel products, as follows: C-635
c-6o3*
(a) Pig iron and ingot steel; 0-l0o>
(b) Scrap iron and steel; N-.1630
(c) Semi-finished and finished iron and 0-1631
steel, including alloy steel (ingots, 0-1635
castings, billets, pipes, tubes, 0-2610
plates, angles and girders); 0-1154
(d) Barbed wire; 0-2630
(e) Tinplate; 3625
(f) Iron powder and iron alloy powder, of c-616
grain sizes less than 30 microns (30 0-3610
millionths of a meter) in diameter; 0-3630
(g) Galvanized steel cable, rope, strand or 0-2430
cord, of all types with or without a
textile or fibre core, containing one
or more strands composed of three or
more threads or wires, provided that
any one such thread or wire has a
tensole strength (breaking strength) of
180 kg. per sq. mm. or more.
Munitions components and materials, as follows: N-.1615
(a) Brass and bronze fabrications for munitions
anvils, fabrications for bullet cup (gilding
metal clad steel), cartridge belt link,
primer cap shell rotary band;
(b) Brass rolled cartridge strip (with 68 to
72% copper);
(c) Copper rotating bands for shells; and other
copper munitions components;
(d) Gilding metal clad steel;
(e) Gun forgings and castings, rough and alloy
rough (This includes, but is not limited
to, those for artillery guns) machine guns,
automatic guns, and small arms).
C-604' Condenser tubes (seamless cupronickel)
SECRET
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 - Approved For Release 2000/08/23 : IA-hD$6-D0647A000200060002-3 -u-42
Item No. Description Source
C-605* Cable, as follows: N-1430
(a) Electric conducting cable, suitable for sweeping C650
magnetic mines or for harbor defense;
(b) Wire rope, strand and cord, made of phosphor bronze
or stainless steel suitable for aircraft;
(c) Single or multicore electric power cables insulated
with paper and metal sheathed, with or without
ariour and/or serving, n.e.s.
(d) Galvanized steel cable (See C602(g) above).
C-6061: Magnetic materials of all t pes and of whatever form, N-1631
e.g., powder, strip, sheet, castings, and blocks, if 0-1631
possessing one or more of the following characteristics;
(a) For sheet or strip, thickness of 0.0031 (0.075 mm)
and less;
(b) Initial permeability 20,000 or over;
(c) Remanance 85% of m ximum flux or over;
(d) Energy product 10 gausses oersteds or over;
(e) Core loss of 0.5 watts per second at B equals 13,000
gausses and 50 cycles per second or less
C-607
Flexible metal tubing, n.e.s.
C610
C-6081,,
Aluminum and aluminum alloys, primary and secondary,
0-1636
as follows:
0-2635
(a) Crude forms;
(b) Semifabricated forms;
(c) Scrap;
(d) Powder.
(Note. Aluminum foil for wrapping purposes is excepted,
provided that the foil is either:
(a) Embossed, printed or lacquered in sheets or coils; or
(b) Plain sheets - with or without paper backing - the
largest dimension of which does not exceed 811 (20 cms)
C-609
Antimony, as follows:
(a) Concentrates;
(b) Metal;
(c) Compounds (excluding medicinals)
3635
C-610*
Bismuth:
metal and alloys
0-1641
C-611:
Cadmium
0-1645
C--6124-
Calcium:
metal
0-1646
C-613:
Cobalt, as follows: 0-1648
(a) Ores, residue, and concentrates including arsenical 0-3703
crystals;
(b) Cobalt bearing scrap;
c Metal;
(d) Compounds (including cobalt oxide, but excluding
(i) paint driers; (ii) paint pigments containing less
than 20% cobalt
(Note: Paint driers, for this purpose, are regarded ; -
as being products, or preparations of
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
S E C R E T
Item No. Description
C-613 such products, containing combined cobalt with or
(contTd) without other metals, produced in any way by
reaction with one or more of the following:
linseed oil, linseed oil fatty acids, colophony,
tall oil, naphthenic acids, 2-ethylhexanoric acid)
C-614* Columbium (niobium), as follows:
(a) Ores and concentrates;
(b) Scrap;
(c) Metal and alloys (including ferrocolumbium and
ferrocolumbium-tantalum.
C--615*
Copper, as follows:
(a) Copper ores, concentrates, regulus, and matters;
(b) Copper and copper alloy scrap and old metal;
(c) Copper and copper-base alloys in the form of anodes and
cathodes, billets, blocks, blooms, cakes, ingots, ingot
bars, pellets, pigs, shot, slabs, sticks, wire bars and
wire rods, and other cast shapes;
(d) Copper and copper-base alloy semifinished products, as
follows: sheets, strips, plates, rods, pipe and tubing,
wire (uncovered);
(e) Copper and copper base alloy finished products, as
follows: (i) cable, uncovered; (ii) wire, single
strand conductor) of a diameter of 0.35 mm or less,
insula ted.
N-1649
0-1650
C-616*
Ferrochrome (low carbon) containing a maximum of 0.2% carbon
0-2640
C-617'
Ferrothorium; ferrouranium
0-1672
C-618*
Germanium and germanium compounds
0-1653
C--619`
Lead, as follows-
0-2650
(a) Ores, concentrates, bullion, and matte;
(b) Scrap and old metal;
3650
(c) Metal, in the form of pigs, slabs, shot, bars, and
other primary shapes;
(d) Secondary lead in pig and slab form;
(e) Semi-fabricated and other such forms (including but
not limited to sheet, strip, plate, pipe and tubing).
C-621%
Magnesium and magnesium base alloys as follows:
(a) Magnesium and magnesium base alloys (primary) in the
form of billets, blocks, ingots, notched bars, powder,
slabs, sticks, and crystals;
(b) Scrap and old metal;
(c) Magnesium and magnesium base alloys (secondary);
3651
0-2655
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 SC Alkl?P]92T00647A000 0060002-3
Item No. Description
C-621** (d) Magnesium alloys in the following semi-fabricated
(Conttd) forms;
1) Wrought or worked material fabricated by rolling,
drawing, extruding, forging, impact extruding,
pressing, graining, atomizing and powder
metallurgy;
2) Cast material produced by casting in sand, die,
metal or plaster molds.
C-622- Mercury and mercury compounds
C-623* Molybdenum, as follows:
(a) Ores and concentrates;
(b) Scrap;
(c) ,etal (including wire), ferromolybdenum, and
alloys
(d) Compounds
M
Source
N-16 55
3655
0-1658
(e) Cemented or sintered carbides.
C-624-N, Nickel, as follows: 0-1661
(a) Ores, concentrates, and matte; N-1661
(b) Nickel metal, and nickel base alloys (other than
steel alloys) in the form of ingots, billets, bars,
grains, rods, sheets, strips, shot, plates, circles,
discs, dross, flue dust, foil, powdered in oil,
ribbon, rings, tubes, and wire;
(c) Anodes, cathodes, electrodes, and welding rods;
(d) Catalysts and nickel oxide.
C-625* Platinum products, as follows: 0-1620
(a) Gauzes manufactured from platinum or platinum alloys 0-2610(b)
of 1024 mesh (squares) per sq. cm. or finer;
(b) '.Aire of platinum, rhodium platinum, or iridium
platinum of a thickness of 0.5 mm or less;
(c) Thermocouples manufactured from platinum or
platinum alloys;
(d) Platinum tubing (including such tubing with braided
c' 0
cores, linings, or sheaths of other metals or
substances.
C-626 Potassium metal
C-627* Sodium (metallic)
3660
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 ~(W4 RbAS00647A000200060002-3
Item No
Description
Source
.
Strontium, as follows:
0-1667
C-629
(a) Ores and concentrates;
(b) Metal;
(c) Compounds.
Tin
3665
C-630*
Note. Recognized as presenting special problems.
Tungsten, as follows:
0-1668
(a) Metal and alloys (including ferro-tungsten but not
0-2667
C-631*
steel alloys) in all forms and shapes;
(b) Compounds (including carbides).
Tantalum, as follows:
N-1670
C-632*
(a) Ores and concentrates;
(b) Metal, and ferrotantalum;
(c) Compounds;
(d) Seamless pipe and tubing.
Titanium metal (including sponge) and titanium
N-l671
metal alloys, as follows:
(a) In all unwrought forms;
(b) In all semifabricated forms;
W c Scrap.
d Ferrotitanium
C-633* Vanadium, as follows: 0-1675
(a) Ores, concentrates, and flue dust;
(b) Scrap;
(c) Metal and vanadium base alloys (including
ferrovanadium).
C-634 Zinc: (a) pigs, slabs;
(b) granulated;
(c) die-casting alloys;
(d) all other forms (except manufactures)
C-635* Zirconium, as follows:
(a) Metal and alloys (including ferro-zirconium);
(b) Compounds;
(c) Seamless pipe and tubing.
3670
0-1679
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : IkFil~6F2-60647A000200060002-3
Description
Source
C-636* Abrasives, as follows:
(a) Silicon carbide, crude;
(b) Boron carbide;
(c) Natural corundum (not including emery);
(d) Fused aluminium oxide;
(e) Grinding wheels and other articles made of silicon
carbide;
(f) Grinding wheels and other articles made of fused
aluminium oxide;
(g) Grinding wheels and other articles made of natural
corundum (excluding grinding wheels made of emery);
(Note: The following products are excluded from control
under this item:
(1) Silicon carbide abrasives as follows:
(i) Sheets, cut strips, discs and belts with
backing of kraft and/or rope paper, when the
backing weighs 140 grams per square meter (0.25
lbs. per sq. yd.) or less and when the largest
dimension does not exceed 32 cm (32.6 inches);
(ii) Sheets, cut strips, discs and belts with textile
backing, when the backing weighs 210 grams per
square meter (0.4 lbs. per square yard) or less
and when the largest dimension does not exceed
32 cm. (12?6 inches);
(2) Abrasives of silicon carbide, natural corundum, or
fused aluminium oxide, in paste form, when the
abrasives are reclaimed or, if primary abrasives
are used, when they constitute less than 50 per
cent of the weight;
(3) Sheets, cut strips, discs and belts coated en-
tirely (except for filler) with reclaimed corundum
or reclaimed fused aluminium oxide;
(4) Dental abrasives, as follows:
(i) unmounted wheels up to 1 inch (25.4 mm) in
diameter where the arbor hole is less than
0.08 inches (2.03 mm);
(ii) wheels up to 1 inch (25.4 mm) in diameter
and points mounted on a mandrel less than
0.093 inches (2.36 mm) in diameter;
(iii) metal strips less than 5/32 of an inch
(3.97 mm) in width coated with abrasive grain;
(iv) flexible metal discs up to 3/4 of an inch
(19.05 mm) in diameter, coated on one side
with abrasive grain.
C-637* Titanium carbide
0-1374
0-2375
0-3374
N-2671
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : GIfRDR62-g0647A000200060002-3
47
Item No. Description Source
C-638: Diamonds, and items incorporating diamonds, as follows: N-1385
(a) Diamonds suitable for industrial use, including N-1387
splints and borts (Interpreted to include industrial
diamonds, dust, and powder. Also interpreted to
include rough diamonds suitable either for gem
stones or industrial diamonds.)
(b) Diamond grinding wheels, sticks, hones and laps.,
C-639- Asbestos, raw and manufactured, except the following: 0-1680
(a) asbestos cement products 3680
(b) filter asbestos C680
(c) asbestos jointing and packing 3910
C--640* Graphite and carbon, as follows:
(a) Graphite (artificial) and amorphous carbon (ex- 0-1302
cluding charcoal), in forms (including scrap" whose 0-1390
largest dimension exceeds 251.(635 mm), or whose 0-3301
smallest dimension exceeds 21t (50 mm), or whose 3385
weight exceeds 6 lbs. (2.7 kg);
(b) Powder (carbon only);
(c) Crucibles, natural graphite;
(d) Crucibles, artificial graphite;
(e) Electrodes (artificial graphite), with cross-section
3/4" to 2+" (19 to 50 mm).
C-641* Mica (strategic grades), as follows: block (good 0-1691
stained or better), film and muscovite splittings, and
phlogopite splittings which conform to the American Society
of Testing Materials standards or to India-Calcutta
standards.
C-642* Quartz crystals and plates
0-1587
C-642 Steatite (talc) as follows: 3690
(a) Machinable grade, block or lump, containing not overt
1.5% iron (Fe) in the form of iron oxide and not over
0.5% CaO (lime);
(b) Non-machinable grade or in ground form, containing
not over 1,5% iron (Fe) in the form of iron oxide
and not over 0.5% CaO (lime).
C-643 Sulfur bearing pyrites (i.e. iron pyrites and copper 3663
pyrites)
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 gCA4 P&2p00647A0002U0060002-3
International China Embargo List
Chemical and Petroleum Products
Item No. Description
C-701* Detonators:
(a) mercury fulminate, lead azide, lead styphnate
and lead thiocyanate; and detonating or priming
compositions (mixtures containing one or more of
these chemicals;
(b) sodium azide.
C-702y Stabilizers for explosives, as follows:
(a) ethyl and methyl centralites
(b) diphenylamine
(c) N, N-diphenylurea (unsymmetrical diphenylurea)
(d) methyl-N, N-diphenylurea (methyl unsymmetrical
diphenylurea)
(e) ethyl - N, N-diphenylurea (ethyl unsymmetrical
diphenylurea)
(f) ethyl phenyl urethane
(g) diphenyl urethane
(h) diortho - tolrl - urethane
(i) 2-nitro-diphenylamine
C-703*
Dynamite
0-2742
C-704
Explosives, n.e.s.
3701
C-705*
Cellulose nitrate containing 12.3% or less nitrogen
0-2719;
3719
C-706
Alpha cellulose, purified, containing not less than
88% alpha cellulose
3717
C-707*
Ethyl cellulose
0-1717
C-708-"*
Polyethylene
0-1750
C-709"
Polytetrafluoroethylene
0-1751
C-710:
Trifluorochloroethylene (polymerized or not)
0-1764
C-711-
Styrene (monomer); dichlorostyrene (monomer);
polydichlorostyrene and its molding powders, sheets,
rods, and tubes
0-1758
C-712*
Methyl methacrylate, as follows:
0-2737
(a) resins, molding powders, sheets, rods, and tubes;
(b) monomer, with or without the addition of sta-
bilizers, packed in bulk containers of 10 gallons
or more; and resins in the form of scrap.
3737
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 :`C&-k[3P&2T00647A000260060002-3
L19
Item No.
Chemical and Petroleum Products
Description
Source
C-713
Vinyl and vinylidene resins, molding powders, sheets,
rods, and tubes
3766
0-2754
C714*
Polyisobutylene
C 715
Formaldehyde (in solution or polymerized)
3730
N-1720
C-716
Dinitrotoluenes
0-1739
C-717*
,.Tonochlorobenzene
C 718:;
Picric acid (trinitrophenol)
N-1748
0-2725
C-719*
N, N-dimethylaniline
0-2731
C-720-,r
Hydrocuinone
0-2751
C-721-Mr
Phenol
N-2764
C-722:
Toluene
C-723
Aniline
3712
C-724
Benzene or benzole
3714
C-725
2:4-dinitrophenol
C-726
p- minophenol and salts
3746
C-727
p-phenylenediamine
3747
C-72$
1,Aononitrobenzene
3748
C-729
Cresylic acid including para-., meta-, and ortho-Cresol C-750
and xylenol
C-730
Phthalic anhydride; and phthalic esters (except
alkyd resins)
3754
C-731%
1:2-dibromoethane (ethylene dibromide)
0-1719
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/238 PI F E61-00647AOOO2O0060002-3
Chemical and Petroleum Products
Description
C732*
C-733*
C-734'
Fluorinated hydrocarbons as follows;
(a) Trichloromonofluoromethane (F-11)
(b) Monochlorotrifluoromethane
(c) Dichloromonofluoromethane
(d) IVonochlorodifluoromethane
(e) Trichlorotrifluoroethane
(f) Dichlorotetrafluoroethane
(g) Trichlorodifluoroethane
(h) Monobromotrifluoromethane (F-13-B-1)
(i) Dichlorodifluoromethane (F-12)
(j) hlonochlorodifluoroethane
(k) Tetrachlorodifluoroethane
(1) Difluoroothane
(m) Tetrafluoromethane
(n) Dibromodifluorometrane (F-12-B-2)
(o) l~Fonobromomonochlorodifluoromethane
(p) Dibromomonochlorotrifluoroethame
(q) Dibromotetrafluoroethane
(r) I'lonochloropentafluoroethane
(s) 0ctafluorocyclobutane
Furfural; furfural alcohol; tetrahydrofurfural alcohol
Glycols and their derivatives, as follows:
(a) Ethylene glycol (ethanediol-1,2), propylene glycol
(propanodiol-1,2), and di:thyle;ne glycol (di-2-
hydroxyethyl ether); and mixtures consisting
mainly of one or more of these compounds;
(b) Thiodiglycol, and mixtures consisting mainly
thereof;
(c) Diethylene glycol dinitrate, and mixtures
consisting mainly thereof
0-1721
0-2721
3720
0-1725
0-1727;
0-2727
(d) Polypropylene glycol.
C-735* Hexa-nethylenetetrarnine
N-1729
C-736* Methyl isobutylkotone
0-1737
C-7373- Nitroguanidine
N-1741
C-738* Guanidine nitrate
N-1742
C-739* Pentaerythritol; pentaerythritol tetranitrates
N-1744
C740- Acetic anhydride
3709
C741 Acetic acid (over 80)
3710
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : tIA-ADP(f2-b0647A0003260060002-3
Chemical and Petroleum Products
Item No. Description
C-742 Acetone 3711
C-743 Glycerine 3733
C-744 Isopropyl alcohol 3739
C-745 Methanol 3745
C-746 Tricresyl phosphate 3758
C-747* Rubber compounding agents, as follows: 0-1704
(a) antioxidants
(b) nonmineral accelerators
(Note: See Interpretative Note No. 2)
C-748;; Aluminum cLiloride (anhydrous) 0-1710
C-749* Barium nitrate; barium chromate 0-1713
C-750 Boric acid and borates (crude or refined) 3715
C-751 Bismuth compounds, including but not limited to those 0-2715
used in medical compounds (Note: This does not include
medical preparations themselves ivhich are mixtures con-
taining other substances of therapeutic value. See
Illustrative Footnote No. 3)
C-752* Carbon black 0-1716
C-753' Calcium carbide 3718
C-754 Chlorates and preparations consisting mainly thereof 3721
C-755 Chromium compounds, as follows: 3722
(a) sodium dichromate and chromate;
(b) potassium dichromate and chromate;
(c) chromic acid;
(d) chrome oxide green;
(e) zinc chromate.
C-756*
Hydrazine; hydrazine hydrate; hydrazine salts
N-1731
C-757^
Hydrogen peroxide (50% strength and over)
e
N-1732
2741
C-758*
Nitric acid; ammonium nitrate; potassium nitrate.
0-
C-759
Perchloric acid and its salts
3751
C-7,60*
Permanganates: calcium and potassium
S E C R E T
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 : CIA-FgDIP672-10647A0002D0060002-3
Chemic ^.1 and Petroleum Products
No
It
Description
Source
.
em
C-761
C-762*
C-763*
C-764`
C-7653
C-766*
Persulfates: sodium, potassium, and ammonium
Phosphoric acid catalyst (Victor)
Potassium tetroxide
Phosphorous (including red)
Sodium cyanide (chemical grades)
Sulphur, as follows:
(a) Crude, crushed, ground, refined, sublimed, and
flowers (from whatever source);
(b) Dusts, spray concentrates and other preparations
containing 85% or more sulphur, such as but not
limited to conditioned sulphur and wettable sulphur.
3749
0-1747
0-1752
0-2752
0-2757
0-2761
3761
C-767*
Sulphuric acid, 93% H2S04 and stronger, including
oleum (fm,,ing sulphuric acid)
0-2762
C-768*
Thallium bromoiodide
0-1760
C-7694
Titanium tetrachloride
0-1761
0-1766
C-7`70*
Vanadium compounds
3763
C-771*
Flotation reagents, synthetic organic, as follows:
(a) sodium and/or potassium alkyl xanthates;
(b) acetates of dodccyylamine and its higher homologues
and mixtures thereof;
(c) acetates of amines derived from natural fatty acids,
whether hydrogenated or not;
(d) dialkyl or diaryl dithiophosphoric acids; and their
sodiua, potassium and ammonium salts;
(e) quatenary trimethylammonium chloride from amines
prepared from soya bean fatty acids
0-2701
C-772* Silicon (e) organic compounds of the following kinds: 0-1755
(a) silicon (e) high vacuum grease; N-1755
(b) silicon (e) stopcock grease, high vacuum or regular; N-3755
(c) silicone rubber;
(d) silicon (e) oils;
(e) siloxanes.
C-773 Shipst bottom compositions: anti-corrosive and anti- 3702
fouling
Approved For Release 2000/08/23 : CIA-RDP62-00647A000200060002-3
 Approved For Release 2000/08/23 :,tIA-IgD'PIPi2.b0647A000200060002-3
Chemical and Petroleum Products
53
Item No. Description Source
C-77:2. Mctallo-organic artificial colouring matters of cobalt, 3703
molybdenum, or tungsten containing less than 20% of
any of these metals
C-77 Hydraulic fluids