FR:SCHMIDT H TO:PETROS J

• Document Type: CREST
• Collection: Consolidated Translations
• Document Number (FOIA) /ESDN (CREST): CIA-RDP91-00403R000201250001-6
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: December 29, 2016
• Document Release Date: August 14, 2005
• Sequence Number: 1
• Content Type: ABSTRACTS

00100/1972-,VO027,NO002, PP 0134-0136
COMPARISON OF SPEED CONSTANTS OF INTERNAL OXIDATIO
OF AGMG AND AGAI ALLOYS, CALCULATED BY DIFFERENT
METHODS. REVIEW OF METHODS OF DETERMINATION OF
CONSTANTS OF AGMG AND AGAI ALLOYS. EXPERIMENTAL
MATERIAL AND THE METHODS OF MEASUREMENT. COMPARISO
OF CALCULATED VALUES OF AGMG AND AGAl ALLOYS ....
NTC 75-13223-11F 0
SCHMIDT, H.
/IHUTNICKE LISTY//
O-O/OOtl973,V----,NOOOI, PP 0009-0012
THE EFFECT OF THE PROPORTIONS OF FINES IN
SINTERING ON THE RESULTS OBTAINED IN BLAST
FURNACE OPERATION IN THE EAST SLOVAK IRON
AND STEEL WORKS iVSZ)
BISI 11392 0
KEPKA, M.
//HUTNICKE LISTY//
00/0011973,V----,NO001, PP 0013-0017
SOME KNOWLEDGE OBTAINED FROM THE ELECTROSLAG
REMELTING OF STEELS
BISI 11393
PAPCUN, J.
/IHUTNICKE LISTYI/
OO/OO11'373,V----,NOOO2, PP 0128-0132
THE INFLUENCE OF TECHNOLOGICAL CONDITIONS IN
PRODUCTIGN UPON THE CHANGE OF R-VALUE
BISI 11854
JANOUSEK, 1.
//HUTNICKE LISTY//
00/00/1973,V----,NO005, PP 0305-0310
THE MONITORING OF BLAST FURNACE COOLING ELEMENTS
BISI 12049
SOBOTKA, J.
//HUTNICKE LISTY//
0O)OO/1973,V----,N0O05, PP 0353-0359
ANUSITGERMAL DECOMPOSITION OF AUSTENITE IN
17 PERCENT CR,2 PERCENT NI, 0.1 PERCENT C STEEL
BISI 12050
CENGEL, J.
//HUTNICKE LISTYI/
00/00/1973,V----,NO006, PP 0385-0389
NOTE ON THEORY OF DIRECT REDUCTION
B]Sf 118163
PUSKAR, A.
//HUTNICKE LISTY//
00/00/1973,V----,NQ006, PP 0421-0425
TEMPERING OF HARDENED ANTIFRICTION REARING
STEEL IN ULTRASONIC FIELD
elSf 11867
FOLDYNA, V.
//HUTNICKE LISTY//
00/00/1973,V----,NO006, PP 0426-0430
METHODS OF EVALUATION OF THE PROPERTIES
OF CREEP RESISTING STEELS AND THEIR
RELIABILITY FOR EXTRA POLATION
000000020195
000000000936
000000001963
000000002004
000000001456
000000102245
000000020196
00000004252~
"IV

PETROS, J.
//HUTNICKE LISTY/I
OO/OO/1973,V----,NOOO7,
PROBLEMS OF CONTROLLING
FURNACES
BISI 12075
PP 0474-0481
THE CHARGE IN TANDEM
STUIRO, J.
//HUITNICKE LISTY//
OO/OO/1973,V----,NO0O7, PP 0481-0487
AN OPTIMIZATION OF THE TECHNOLOGIES APPLIED
IN SULPHURIC ACID STEEL PICKLING BASED
ON THE PHA&E EQUILABRIA WITHIN THE
PICKLING REGENERATION CYCLE IN THE
PICKLING LIQUOR
BISI 12076
IMRIS, 1.
//HUTNICKE LISTYI/
OO/OO/1973,V----,NOOO7, PP 0494-0499
EFFECT OF TEMPERATURE OF COPPER LOSSES IN SLAGS
BISI 12077
KOMOROVA, L,
//HUTNICKE LISTY//
00/0011973,V----,NO008, PP 0577-0582
VACUUM REFINING TECHNI(AJE FOR REMOVAL
OF IMPURITIES FROM COPPER
BISI 12425
HAROK, M.
//HUTNICKE LISTY//
00/00/1973,V----,NOOO'3, PP 01620-0626
A NEW METHOD OF CASTING COMPOSITE TWO-LAYER INGOTS
OR CASTING
BISI 12495
BERNART, E.
//HUTNICKE LISTY//
OO/OO/1'373,V----,NOOlO, PP.0706-0710
OSCIALLATING MOULDS FOR CONTINOUS CASTING OF STEEL
BISI 12497
ONDERKA, M.
//HUTNICKE LISTY/I
00/00/lc)73,V----,NOOIO, PP 0719-0727
ROLLING AND HEAT-TREATING OF TRANSFORMER STEEL
WITH SULPHIDIC INHIBITION PHASE
BISI 12498
SOMMER, 8.
//HUTNICKE L15TY//
OO/OO/1973,V----,NOQll, PP 0771-0780
LENGTH EXTNSION OF SURFACE COOLED INGOTS
BISI 12499
GESTERCI, M.
//HUTNICKE LISTYJJ
OO/OO/1973,V----,NOOll, PP 0797-0801
STRENGTH PROPERTIES OF SINTERED COMPACTS MADE
FROM SPRAYED COPPER POWDER
BISI 12500
000000013940
000000001546
000000000189
000000011489
000000009755
000000006398
000000009753
000000205498
000000009266
v

JANDA. E. 000000009752
//HUTNICKE LISTY/I
OO/OO/1973,V----.NOO12, PP 0857-0%0
THE INFLUENCE OF SHEET THICKNESS UPON SPECIFIC
LOSSES OF ORIENTATED TRANSFORMER STEEL
SISI 12502
FOLOYNA, F. 000000171265
//HUTNICKE LISTY//
0O/OO/1973,VOOl8,N----, PP 0426-0430
METHODS FOR EVALUATING HEAT-RESISTING STEEL
PROPERTIES AND THE DEPENDABILITY FOR EXTRAPOLATION
eisl
SCHMIDT, H. 00000021037c~
//HUTNICKE LISTYY1
OO/0O/1973.VOO28,N----, PP 0009-0012
THE EFFECT OF THE PROPERITIES OF FINES IN
SINTER ON THE RESULTS OBTAINED IN BLAST-FURNACE
OPERATION IN T14E EAST SLOVAK IRON AND STEEL WORKS
BISI 11392
BRABEC, J. 000000227350
//HUTNICKE LISTY//
0010011973,VO028,N----, PP 0023-0030
TWENTY-HIGH MILLS FOR PRECISION STRIP ROLLING
MANUFACTURED BY THE SKODA WORKS
BISI L.STG 11394
DEDEK, V. 000000143867
I/RJTNICKE LISTY//
OO/OO/1973,VOO28,N----, PP 0031-0039
CONTINUOUS HARDENING OF STEEL STRIP
BISI L.STG 9.00 11395
JANDA, E. 00000017e930
//HUTNICKE LISTYI/
0O/OO/1973,VOO28,N----, PP 0039-0042
ANOMALIES OF EDDY CURRENT LOSSES IN GRAIN
ORIENTED TRANSFORMER SHEETS
BISI 113916
KONVICNY, J. 000000227654
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0099-0104
OPTIMUM SPEED RATES IN HEAVY REVERSING MILLS
eisl 11851
DEDEK, V. 000000272647
//HUTNICKE LISTY//
00/0011973,VO028,N----, PP 0104-0113
COLD FORMABILITY ANNEALING AND PROPERTIES OF
HIGH-CARBON STEELS FOR STRIP
BISI 11852
BARACKOVA, L. 000000193194
//HUTNICKE LISTY//
OO/OO/1973,VOO28,N---.-, PP 0120-0128
EFFECT OF PHOSPHOROUS, SULPHUR AND NITROGEN ON
THE PROPERITIES OF HIGH CHROMIUM STEELS 21 PP
BLL:L.STG 13023.19 VR-151/73
GARACKOVA, 1. 000000210512
/YHUTNICkE LISTYI/

00/00/1973,VO028,N----, PP 0120-0128
ENGLISH TITLE UNKNOWN
ZIID 33/21% 0
STYBOL, K. 000000028669
//HUTNICKE LISTY//
OO/OO/1973,VOO2B,N----, PP 0143-0145
DETERMINATION OF NITROGEN INSTEELS WITH
USE OF THE EXHALOGRAPH EA-1 FITTED WITH AN
4DD~TIVE NITROGEN
NTC 75-10098-11F
MRAZEK, J. 000000171255
,//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0159-0164
NOWUNIFORM BORDEN DISTRIBUTION IN BLAST-FURNACE
TOP CIRCUMFERENCE AND ITS COMPUTATION
8151 11855
MRAZEX, J. 000000210509
11HUTNICKE LISTY//
OO/GOil973,VOO28,N----, PP 0159-0164
NON-UNIFORM DISTRIBUTION OF BURDEN IN BLAST
FURNACE TOP CIRCUMFERENCE AND ITS COMPUTATION
8ISI
VITEK, V. 000000171254
YlHUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0164-0169
THERMOPLASTIC PROPERTIES OF SINTER
8ISI i1856 0
VITEK, V. 000000210510
//HUTNICKE LISTY/I
00/00/1973,VO028,N----, PP 0164-0169
THERMOPLASTIC PROPERTIES OF AGGLOMERATE
BISI 11956
KUBENA, J. 000000171253
//HUTNICKE LISTY//
00100/1973,VO028,N----, PP 0170-0176
DYNAMIC MODEL OF ARC FURNACE CHARGE MELTING
BISI 11857
ZIDEK, J. 000000219307
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0186-0192
DETERMINATION OF NATURAL DEFORMATION RESISTANCE
IN HOT ROLLING OF STEELS 18 PP
BLL L.STG c)023.19 VP 162173
ZIDER, J. 400000171252
//HUTNICKE LISTY/l -
OO/OO/1973,VOO28,N----, PP 0192-0196
MODEL RESEARCH IN ROLL PASS DESIGN OF SECTION
MILLS
BISI 11858
ZIDEK, J. 000000197463
//HUTNICKE LISTYI/
OO/OO/1973,VOO28,N----, PP 0192-0196
MODEL RESEARCH IN ROLL PASS DESIGN OF SECTION
MILLS
QISI 11858

-~K-LISTYI/
7WJiN'I E
00/00/1973,VO028,N----, PP 0197-0202
BEHAVIOUR OF AUSTENITIC STAINLESS STEEL IN
COLD PLASTIC DEFORMATION
BISI 11859
ZEZUl-OVA, M.
/iHUTNICKE LISTY//
00/00/1973,VO028,N----, PP Olc)7-0202
THE BEHAVIOUR OF AUSTENITIC STAINLESS STEELS IN
COLD PLASTIC DEFORMATION
olsi 11859
JANDi, E.
I/HUTNICKE LISTYI/
O,O1OO/i973,VOO29,N----, PP 0202-0209
EFFECT OF TEXTURE PERFECTNESS OF MAGNETIC
PROPERTIES
OF TRANSFORMER SHEET
BISI 11860
SEBEK, P.
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0209-0213
EFFECT OF INCLUSIONS ON THE DEGREE OF DEVELOPMENT
OF THE GOSS TEXTURE IN TRANSFORMER STEEL 13 PP
BLL:L.STG 9023.19 VR-152/73 0
SEBEK, P.
//HUTNICKE LISTY//
OO/OO/1973,VOO28,N----, PP 0209-0214
EFFECT OF INCLUSIONS ON GOSS TEXTURE PERFECTNESS
IN TRANSFORMER STEEL
BISI ll%l 0
SEBEK, F.
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0209-0214
EFFECT OF INCLUSIONS ON GLOSS TEXTURE PERFECTNESS
IN TRANSFORMER STEEL
BISI 11861
STEJSKAL, E.
//HUTNICKE LISTY//
00/0011973,VO028,N----, PP 0214-0219
POSSIBLE REDUCTION OF DECARBURIZATION DEPTH IN
SPHEROIDIZING ANNEALING OF WIRES WITH CARBON
CONTENT
BISI 11862
Q,
a
000000171251
000000230?13
000000171250
000000193244
000000138414
000000171270
000000171269
POSELTOVA, M. 000000217372
/lHUTNICKE LISTY//
00/00/1973,VO,028,N----, PP 0219-0225
REDUCING THE GAS CONTENT OF ALLOYING ADDITIONS
BLL L.STG 9023.19VR 15303
DEKANOV$KY, A.
//HUTNICKE LISTY//
OO/OO/1973,VOO28,N----, PP 0249-0256
MICRO ALLOY FINE GRAINED FERRITIC PEARLITIC STEELS
FOR WIDE STRIPES 20 PP
OLL 9023.19VR 185/73
000000300607

JANDA. E.
11HUTNICKE LISTY//
OOtOO11973.VO028,N----, PP 0263-0266
EFFECT OF GRAIN SIZE ON THE MAGNETIC PROPERTIES
OF ORIENTED TRANSFORMER STEEL SHEET 9 PP
BLL L.STG 9023.19 VR 186t73
JANOUSEK, 1.
11HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0309-0310
INSPECTION OF BLAST FURNACE COOLING SYSTEM
BISI 12049
LANG, C.
//HUTNICKE LISTYJ/
00100/1973,VO028,N----, PP 0330-0339
RESISTANCE OF OIL, PIPELINE STEELS TO HYDROGEN
CRACKING 22 PP
BLL 9023.19:VR 199/73 0
DEDEK, V.
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0339-0345
EFFECT OF STRUCTURE ON THE PROPERTIES OF WROUGHT
STAINLESS STEELS WITH 1 CR AND 0.6-1. C 15 PP
BLL 9023.19 VR 200-73
ZIDEK, A.
I/HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0345-0348
IMPROVING THE MAGNETIC PROPERTIES OF TRANSFORMER
SHEETS BY STRAIGHTENING ANNEALING 11 PP
BLL 9023.19VR 201/73
JANDA, E.
//HUTNICKE LISTYJ/
00/00/1973,VO028,N----, PP 0349-0353
EFFECT OF MICROCLEANLINESS. ON THE MAGNETIC
PROPERITIES OF ORIENTED TRANSFORMER STEEL SHEETS
13 PP .
BLL:L.STG 9023.19 VR-202/73 0
SOBOTKA, J.
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0354-0359
ANISOTHERMIC DECOMPOSITION OF AUSTENITE IN I CR,
NI 0.1 STEEL
BISI 12050 0
CENGEL, J.
//HUTNICKE LISTY/I
00/00/1973,VO028,N----, PP 0385-0389
NOTE ON THEORY OF DIRECT REDUCTION
BISI 11863
CENGEL, J.
/iHUTNICKE LISTYI/
00/00/1973,VO028,N----, PP 0385-0389
NOTE ON THE THEORY OF DIRECT REDUCTION
BISI 11863
BARACKOVA, C.
//HUTNICKE LISTY/I
OO/OO/1973,VOO28.N----, PP 0395-
9
000000157309
000000272624
000000272611
000000272783
000000193240
000000157310
000000171268
000000251060
000000272605

Qv
PROPERTIES OF HIGH ALLOY STEELS 12 PP
BLL 9023.19 VA 203-73
UNKNOWN
//WUITNICKE LISTY//
OO/O011973.VOO28,N----, PP 0407-0411
A WELDBARE STRUCTURAL STEEL WITH NI FOR LOW
TEMPERATURES 12 PP
BLL 9023.19 VR 204-73
GLATZ, B.
I/HUTNICKE LISTY/I
OO/OO/1973,VOO28,N----, PP 0412-0418
STRUCTURAL STEEL DISPLAYING ENHANCED RESISTANCE
AGAINST ATMOSPHERIC CORROSION
BISI 11866
PUSKAR, k
//HUTNICKE LISTY//
0O1OO/1973,VG028,N----, PP 0421-0425
TEMPERING OF HARDENED ANTIFRICTION BEARING STEEL
IN ULTRASONIC FIELD
BISI 11%7 0
MALY, V.
//HUTNICKE LISTY//
OO/OO/1973,VOO26,N----, PP 0467-0473
EFFECT OF GEOMETRIC AND HYDRODYNAMIC
PARAMETERS OF THE BATH ON THE INTENSITY
OF TRANSPORT OF ITS COMPONENTS
VER VR/229173 0
STURC, J.
//HUTNICKE LISTY//
OO1OO/1973,VOO20,N----, PP 0481-0487
PROCESS OPTIMIZATION IN STEEL PICKLING
DEPARTMENTS WITH SULPHURIC ACID RELYING UPON
EQUIPMENT IN CYLIC PICKLING -REGENERATION
OF PICKLING ACID WASTE
BISI 12076
ELFMARK, J.
//HUITNICKE LISTY//
OOfOO/1973,VOO28,N----, PP 0487-0494
DYNAMIC RECRYSTALLIZATION DURING HOT PLASTIC
DEFORMATION
VER VR/218/73 N
ELFMARK, J.
//HUTNICKE LISTYI/
0O/Oj0/1973,V0028,N----, PP 0487-0494
DYNAMIC RECRYSTALLIZATION DURING HOT PLASTIC
DEFORMATION 18 PP
BLL 93023.19 VR 218/73
SICHA, M.
//HUTNICKE LISTY/I
00/OO/1973,VO028,N----, PP 0499-0509
THE PROPERTIES OF MICRO ALWY STEEL 11523 IN
THE UNANNEALED CONDITION
VER VR/219/73
000000272604
000000171267
000000225581
.1
000000174464
000000209247
S
00000017443
OOOOQ0261340
000000174458

IIHUTNICKE LISTY//
00100/1973,VO028,N----, PP 0499-0509
THE PROPERITIES OF MICRO ALLOY STEEL 11523 IN THE
UNANNEALED CONDITIONt 27 PP
BLL:L.STG 9023.t9 VR-219/73
PETROS, J.
//HUTNICKE LISTY/I
00100/1973,VO028,N----, PP 05160-0569
HOW TO REACH LOW SULPHUR CONTENTS IN STEELMAKING
PARTICULARLY IN TANDEM FURNACES
VER VR/228/73
TICHY, J.
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0570-0577
MANUFACTURE OF STRIPS FROM SI-CR STEEL CSN
142foO ON A CONTINUOUS ROLLING MILL TRAIN
VER VR/222/73
KOMOROVA, L.
//4UTNICKE LISTY//
OO/0O/1973,VOO28,N----, PP 0577-0582
VA,C" REFINING TECHNIQUE FOR REMOVAL OF
IMPURITIES FROM COPPER
BISI 12425
KRIZ, J.
IMUTNINE LISTY//
00/00/1973,VO028,N----, PP 0582-0588
TEMPERATURE DEPENDENCE OF YOUNG'S MODULUS
AND INTERNAL DAMPING OF TECHNICAL IRON
VER VR1232173
HAROK, P.
//H(JTNICKE LISTY//
OO/OO11973,VOO28,N----, PP 0620-0626
NEW PRODUCTION METHOD FOR COMPOUND CAST
INGOTS AND CASTINGS
BISI 12495
FOLTYN, M.
//HUTNICKE LISTY//
OO/OO11973,VOO28,N----, PP Of627-0632
EFFECT OF REHEATING AND FORMING CONDITIONS
ON THE QUALITY OF ROLLED STOCK FROM SULPHUR
ALLOYED STEELS
VER VR/220173
DEDEK, V. -
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0642-0651
DEVELOPMENT AND PROPERTIES OF A NEW STRIP STEEL
FOR SPRINGS WITH 0.7 C, 1.4SI AND
0.3 CR
VER YR1221173
SRBA, A~
//HUTNICKE LISTYF( ... -0655
00/00/1973,VOO28,N~- PP 0651
DESIGNING,NEW TYPES OF ROLLING MILL WITHOUT
CLASSICAL STANDS
*BISI 124%
000000267891
000000174645
000000251151
000000174467
000000192972
000000174644
000000174459
000000197449

BERNART, E. 000000197450
//HUTNICKE LISTY/Y
O,O/0O/1973,VOO28,N----, PP 0706-0710
OSCILLATION OF MOULD IN CONTINUOUS CASTING
OF STEEL
*81SI 12497
ZIOEK, M. 000000155019
I/HUTNICKE LISTY//
DOJC)0/1973,VO028,N----, PP 0711-0718
EFFECT OF FERRITE SHAPE ON THE HOT FORMABILITY OF
CAST AUSTENITIC CORROSION RESISTANT STEELS
sVER VR/245173

ONDERKA, M, 000000192944
//HUITNICKE LISTYI/
00/00/1973,VO028,N----, PP 0719-0727
ROLLING AND HEAT-TREAING OF TRANSFORMER
STEEL SULPHIDE INHIBITIOWPHASE
*BISI 12498
TEINDL, T.
//HUTNICKE LISTY//
00/00/197 V0028,N----, PP 0734-0739
1
FACTORS A4
ECTING STRESS CORROSION CRACKING
IN A HIGH STRENGTH STEEL
*VER VR/246173
BIEBER, B. 000000209213
//HUITNICKE LISTY//
00/00/1973,VO028,N----, PP 0742-0746
USE OF LASER IN SPECTRAL ANALYSIS
VER VR/247173
MASEK, V. 000000253015
I/HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0761-0765
ENGLISH TIT~E UNKNOkN
CERCHAR 13-74-K 27-76736

KEPKA, N. 000000155017
I/HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0766-0770
EFFECT OF REFINING IN THE LADLE ON
CLEANLINESS OF STEEL
*VER VR/248/73
SOMMER, B. 000000174842
//WUTNlCkE.LlSTY//
00/00/1973,VO028,N----, PP 0771-0780
LENGTH EXTENSION OF SURFACE COOLED INGOTS
BISI 12499
KASE, M. ~000000206233
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0840-0846
A MATHEMATICAL MODEL FOR COMPUTING THE OPTIMUM
ECONOMY OF THE CHARGE AND ADDITIONS IN THE
PRODUCTION OF HIGH ALLOY STEELS IN AN ARC FURNA CE
VER VR.2162-74
CIZNER, J. 000000192973
//HUTNICKE LISTY//
00/00/1973,VO028,N----, PP 0847-0856

EFFECT OF VARIOUS MODES Or STEEL, FINAL
DEOXIOATION ON MORPHOLOGY AND CHEMICAL
ANALYSIS FOR NON-METALLIC INCLUSIONS
BISI 121501
JANDA. E.
//HUTNICKE LISTY//
OO/OO/1973,VOO28,N----, PP 0857-0880
EFFECT OF THICKNESS ON SPECIFIC'LOSSES IN TEXTURED
TRANSFORMER SHEETS
BISI 12502 0
LLWAC, J.
//HUTNICKE LISTY//
0O/0O/1973,VOO28,N----, PP 0861-0867
NOTE ON STUOY OF PROPERITIES OF CU-AL ALLOYS
WITH MN ADDITION
BISI 12503 0
REDR, M~
//HUTNICKE LISTY//
OO1OO/i973,VOO28,N----, PP 0867-0875
CALCULATION OF THE COOLING TIME OF BILLETS,
BLOOMS AND PLATES
VER VR/265/74 0
JANDA, E.
//HUTNICKE LISTY//
00/00/1973,VO028,NO001, PP 0039-0042
ANOMALIES OF EDDY CURRENT LOSSES IN GRAIN-
ORIENTED TRANSFORMER SHEETS
BISI 113% 0
BARACKOVA, L.
//HUTNICKE LISTY/I
00100/1973,VO028,NO002, PP 0120-0128
EFFECT OF PHOSPHORUS, SULPHUR AND NITROGEN ON
PROPERTIES OF HIGH-CHROMIUM STEELS
BISI 11853
-JANOA, E.
//HUTNICKE LISTY/I
00/00/1973,VO028,NO003, PP 0202-0209
EFFECT OF PERFECTION IN TEXTURE ON THE MAGNETIC
PROPERTIES OF TRANSFORMER SHEET
BISI 11%0
DEMCIK, Z.
//HUTNICKE LISTY//
00100/1973,VO028,NO004, PP 0244-0249
CALCAREOUS DECOMPOSITION OF BLAST FURNACE SLAG
BISI 13163
BARACKOVA, L.
//HUTNICKE LISTY//
00/00/1973,VO028,NO006, PP 0395-0399
EFFECT OF ELECTROSLAG REMELTING ON THE PROPERTIES
OF HIGH ALLOY STEELS
VR/203/73
BERGHAUER, Z,
//HUTNICKE LISTY/I
00/0011974,V----,N6003, PP 0158-0164
THE CONTROL OF OXYGEN CONVERTER STEE
000000174840
000000192974
000000178960
000000022606
000000032713
000000003113
000000205499
000000032714
000000005170

A
OF THE EAST SLOVAK14N IRON AND STEEL WORKS BY
MEANS OF COMPUTING TECHNIQUE
tBISI 12831
VALLO, M. 000000096805
//HUTNICKE LISTY//
00/00/1974,V-1--,-NO003, PP 0198-0202
PHASE TRANSFOWTIONS IN ISOTRIPIC SILICON
DYNAMO MADE IN THE EAST SLOVAKIAN IRON AND
STEEL WORKS
BISI 12838
CECHURA, P. 000000205497
//HUTNICKE LISTY//
00/0011974,V----,NO005, PP 0322-0326
DESULPHURIZATION OF HOT METAL IN THE LADLE
BISI 12827
MRHA, L. S. 000000005165
//HUTNICKE LISTY//
OO/00/1974,V----.N0OO5, PP 0327-0334
OBSERVATION OF INGOT SOLIDIFICATION AND
HEAT LOSSES IN THE INGOT TOP BY A NUMERICAL METHOD
ON A COMPUTER
tBISI 12826
BLASCIK, F. 000000010516
//HUTNICKE LISTY/l
OO/O0/1974,V----,N0OO5, PP 0360-03165
THE INFLUENCE OF TINNING UPON THE DEEP-DRAWING
PROPERTIES OF SHEET MADE IN THE EAST
SOVAKIAN IRON WORKS
BISI 12825
BALSCIK, F. 000000030499
//HUTNICKE LISTY//
00/00/1974,V----,NO005, PP 0360-0365
THE INFLUENCE OF TINNING UPON THE DEEP-DRAWING
PROPERTIES OF SHEET MADE IN THE EAST
SOVAKIAN IRON WORKS
BISI 12825
STUCHLIK, V. 000000024583
/-/HUTNICKE LISTY//
~0600/1974,V----,NO007, PP 0460-0464
GRINDABILITY OF BITUMINOUS COALS
BISI 12980
MIKESKA, J. 000000024190
I/HUTNICKE LISTY/)
00/00/1974,V----,NO007, PP 0473-0477
SOLVING THE FORCE EQUILIBRIUM EQUATION FOR
METAL ROLLING CONDITIONS IN A PLAIN ROLL
CAP
BISI 12984
SCHMIEDL, J. 000000032126
//HUTNICKE LISTY//
OO/O0/1974,V----j4OOO7, PP 0478-0481
PROCESSING CUPROUS SCRAP BY SELECTIVE MELTING
BISI 13178
VALENTA, D 000000046346
I/HUTNICKE LISTY/I

ooioo/1974,V----,NO008, PP 0553-0557
STRESSES IN FORMED METAL DURING HOT
PIERCING
BISI 12%5
BEDNAR, V. 000000021155
//HUTNICKE LISTY//
GOi0O/1974,V----,NOOO8, PP 0558-0565
MGDERNISING COOLING AND LUBRICATION SYSTEMS IN
COLD STRIP ROLLJNG MILLS
BISI 13182
PROCHAZKA, V. 000000021258
//HUTNICKE LISTY//
00/0011974,V----,NO008, PP 0566-0570
THE REDUCTION OF COPPER SCALES WITH HYDROGEN:
THE PROPERTIES OF SINTERED COMPACTS MADE FROM
COPPER POWDER OBTAINED BY REDUCTION
91SI 12981>
MAIER, J. 000000024197
//HUTNICKE LISTY//
OO/OO/1974,V----,NOOO9, PP 0612-0620
PROBLEMS IN RAISING SNTER QUALITY
BISI 13298
KUCERA, V, 000000026387
//HUTNICKE LISTY//
OO/OO/1974,V----,NOOO9, PP 0620-0627
EXPERIENCE WITH VARIABLE DIAMETER STOCKLINE
ARMOUR IN 1. BLAST FURNACE AT TRINED
IRON AND STEEL WORKS
BISI 13299
CECHURA, F. 000000021357
//HUTNICKE LISTY//
OO/0O/1974,V----,NOGO9, PP 0647-0652
PROBLEMS OF PRODUCTION AND ACCEPTANCE
CRITERIA IN REINFORCING RIBBED BARS WITH A
42KP/MM2 YIELD LIMIT
BISI 13183
SRBA, A. 000000205496
//HUTNICKE LISTY//
OO/OO/1974,V----,NOOO9, PP 0651-0655
DESIGNING A NEW TYPE OF ROLLING MILL WITHOUT
COMMON STAND
BISI 12496
KUFA, F. 000000032124
/lHUTNICKE LISTY//
OO/OO/1974,V----,NOOO9, PP 0653-0658
THE USE OF THE CARBON RAMMING MASS IN METALLURGY
BISI 13184
KESSLER, M. 000000021'431
//HUITNICKE LISTY//
00/00/1974,V----,NO010, PP 0689-0692
EVALUATION OF COAL CHARGES FOR PRODUCTION OF
METALLURGICAL COKE
*BISI 13380
RYC, Z. 000000024183
I/HUTNICKE LISTY//

00/00/1974,V----,NO010, PP 0698-0701
MATHEMATICAL MODEL OF HEAT TRANSFER IN AN
ARC FURNACE
BISI 13381 0
SCHMIEDL, J.
//HUTNICKE LISTY//
00100/1974,V----,NOOIO, PP 0708-0711
RECOVERING COPPER AND NICKEL FROM ANODE SLIME
ORIGINATING DURING ELECTROLYTIC COPPER REFINING
BISI 13823 0
PIEKHALA, K.
//HUTNICKE LISTY//
00/00/1974,V----,NO011, PP 0772-0778
EVAPORATIVE COOLING OF SHAFT AND BOSH OF BLAST
FURNACE 6 IN THE IRON AND STEEL WORKS AT TRINEC
BISI 13382 0
MOTLOCH, Z.
//HUTNICKE LISTY//
00100/1974,V----,NO011, PP 0778-0784
SOME RESULTS OBTAINED IN APPLYING THE
DORTMUND-HOERDER METHOD OF VACUUM
DEGASSING
BISI 13289
BUZEK, Z.
//HUTNICKE LISTY//
00/00/1974,V----,NO011, PP 0784-0790
THE EFFECT OF SCANDIUM, YTTRIUM, LANTHANIUM
AND CERIUM ON SULPHUR ACTIVITY AND SOLUBILITY
IN IRON AT 1600 C
BISI 13290
kOMOROVA, L.
//HUTNICKE LISTY/J
00/00/1974,V----,NO011, PP 0805-0807
STUDY OF TWO PHASE EQUILIBRIUM IN CU-0 SYSTEM
BISI 13291
JECH, J.
//HUTNICKE LISTY/f
00/00/1974,V----,NO011, PP 0815-0818
EVALUATION OF THE PURITY OF STEEL FOR ANTI:--,
FRICTION BEARINGS
BISI 13292
ELFMARK, J.
//HUTNICKE LISTY//
QO/OV1974,V ----- NOO12, PP 0863-0867
THE EFFECT OF CARBON ON THE HOT FORMABILITY
OF CHROME STEELS
BISI 13584
TOMASEK, K.
/114UTNICKE LISTY//
0010011974,V---- NO012, PP 0882-0888
SURFACE TENSION 6F FE-0-SI02-X SLAG SYSTEMS
BISI 13572
PRNKA, T.
//HUTNICKE LISTY//
GO/00/1(374,VO012,N----, PP 0868-0871
000000084741
000000021397
000000026389
000000021297
000000047910
000000021410
000000019059
000000029345
000000019066

OF
LOW ALLOY CREEP RESISTING STEELS
BISI 13583
CHVOJKA, J.
//HUTNICKE LISTY//
OO/0O/1974,VOO29,N----, PP 0013-0020
NEW DATA ON DEOXIDATION OF STEEL WITH ALUMINIUM
IN THE OPEN HEARTH PORCESS AND THEIR APPLICATION
VER VR1263-74
ZAMYSLOVKSY, Z.
..//HUTNICKE LISTY/I
O0/OO/1974,VO029,N----, PP 0027-0031
EFFECT OF CHEMICAL COMPOSITION STRUCTURE AND
TEMPERATURE ON THE NON-UNIFORMITY OF DEFORMATION
VER VR/266174
MATIASOVSKY, K.
/lHUTNICKE LISTYI/
00/0011974,VO029,N----, PP 0032-0035
IMPURITIES IN THE ALUMINIUM ELECTROLYTE
METINFORM 315
JANCA, E.
IIHUTNICKE LISTY//
DO/0O/1974,VOO29,N----, PP 0036-0040
EFFECT OF MECHANICAL STRESSES ON THE MAGNETIC
PROPERTIES OF ORIENTED TRANSFORMER STEEL SHEETS
VER YR/267-74
HOLY, M.
//HUTNICKE tISTY//
00/00/1974,VO029,N----, PP 0115-0123
COMOARISON OF A CR-MO STEEL WITH CR-V AND CR-MO-V
STEELS WITH REGARD TO THE NEED FOR ANNEALING OF
WELDS
VER VR/278/74
DEKANOVSKY, A,
//HUTNICKE LISTY//
OO/0O/1974,VOO29,N----, PP 0164-0172
EFFECT OF NOBIUM AND ZIRCONIUM ON THE PROPERTIES
OF WIDE STRIPS FROM FERRITIC PEARLITIC STRUCTURAL
STEELS,
VER VR/292174
SLESAR, M.
//HUTNICKE LISTY//
OO/OO/1974,VOO29,N----, PP 0173-0183
PHYSICO METALLURGICAL PRINCIPLES OF THE EFFECT OF
SILICATE INCLUSIONS ON THE ANISOTROPY OF STRIP
STEELS MADE AT THE EAST SLOVAKAN STEELWORKS
VER VR/293/74
DEKANOVSKY, A.
//HUTNICKE LISTYI/
0O/OO/i974,VOO29,N----, PP 0187-0193
WELDABLE MICRO ALLOY STRUCTURAL STEELS KITH
REDUCED PERALITE CONTENT FOR WIDE STRIPS AND
SHEETS
VER VR/294/74
HRIVNAK. 1
000000206245
000000178961
000000162394
000000206244
00000017e933
000000272785
000000272831
000000272633
7

IiHUTNICKE LISTY/I
OO1OO/1974.VOO29,N----, PP 0194-0198
METALLURGICAL ASPECTS OF THE WELDABILITY OF TI
AND ZR MICROALLOY STEELS PRODUCED AT THE EAST
SLOVAKIAN STEELWORKS IVSZ)
VER VR/283174
PARMA. V.
//HUTNICKE LISTY/i
00/00/1974,VO029,N----, PP 0247-0255
THERMAL INSULATRIMMING STEEL INGOT TIPS IN THE
MOULD
VER VR/286174
LANG, C.
//HUTNICKE LISTY//
,00/00/1974,VO029,N---- 8 PP 0262-0268
EFFECT OF THE FINISHING TEMPERATURE ON THE
MEC14ANICAL PROPERTIES OF SEAMLESS TUBES FROM
STEEL X52
VER VR1287/74
KALIVODA, A.
//HUTNICKE LISTY//
DO/00/1974,VO029,N----, PP 0269-0272
STEEL FOR CASING PIPES RESISTANT TO STRESS
CORROSION CRACKING
VER VR/2%/74
LANG,IC.
//HUTNICKE LISTY//
00/00/1974,VG029,N ----- PP 0335-0340
POSSIBILITIES OF IMPROVING THE MECHANICAL
PROPERITIES OF STEEL STRIP'S WITH HIGHER
YIELD STRENGTHS BY MODIFICATION OF THE
ROLLING TECHNOLOGY
VER VR/321/74
KALIVOOA, A.
//HUTNICKE LISTY//
00/00/1974,VO029,N----, PP 0341-0348
DEVELOPMENT OF GRADE P110 CASING PIPES ACCORDING
TO API
VER VR/322/74
DEDEK, V.
//HUTNICKE LISTY/i
00/00/lc)74,VO02,NO001, PP 0003-0008
PROBLEMS IN ESTABLISHING THE QUALITY OF
METALLURGICAL COKE
BISI 19796
MOTCYKA, V. 000000279580
//HUTNICKE LISTY1Y
00100/1'981,VO036,NO001, PP 0003-0008
PROBLEMS IN ESTABLISHING THE QUALITY OF
METALLURGICAL COKE
BISI 19796
MOTYCKA, V. 000000283406
//HUTNICKE LISTY//
00/00/1981,VO036,NOOOI, PP 0003-0008
PROBLEMS IN ESTABLISHING THE QUALITY OF
11

BISI 197%
k
GERi-E. L.
//HUTNICKE LISTY//
OO/01/1991.V----,NOO0l, PP 0001-0002
RAW MATERIALS, ENERGY PROBLEMS HINDER CSSR
METALLURGY PROGRESS 4 PP
GUO
JPRS L/%18
UNKNOWN
//HUTNICKE LISTYI/
O0102/1981,V----,NO002, PP 0148-0149
SLOWER GROWTH, BETTER QUALITY TARGETED IN CSSR
METALLURGY 4 PP
OU0
JPIRS L /9750
GERLE, LADISLAV
//HUTNICKE LISTY//
00100/1982,V----,NO001, PP 0001-GO02
MINISTER~OUTLINES 1981-1985 METALLURGY TASKS 3 PP
ouo
JPRS L/10459 0
WROBLEWSKI, S.
//HUTNICKE//
OO/OO/1%O,V----,NOOO1, PP 0036-0042
AN OUTLOOK ON IRON AND STEEL PRODUCTION
TECHNOLOGY FOR THE YEARS 1975-2005
BISI 1 %92 0
PETROSE, J.
//HUTNICKE, LISTY//
OO/OO11979,V----,NOOO3, PP 0164-0169
EFFECT OF METALLURGICAL FACTORS ON CARBON REMOVAL
PROCESS IN STEEL BATH OF THE TANDEM FURNACES
BISI 18576 0
HAJDUK, M.
//HUTNICKLISTY//
OO/OO/1979,V----,NOOO2, PP 0095-0098
OETERMINATION OF THE PERMISSIBLE EXTERNAL PULL
ACTING ON A PIECE BEING ROLLED CONTINUOUSLY, AT
THE INTER-STAND TRAVEL
BISI 18570
PIVNY, B.
//HUTNICKY LISTY//
0010011976,VO031,NOOII, PP 0803-0808
THE APPLICATION OF CONTINUOUS GAS FURNACES WITH
TUNNEL (PULSED) BURNERS IN THE MANUFACTURE OF
SEMI FINISHED PRODUCTS FROM NON-FERROUS METALS
BISI 20196
PWSKA, R.
//HUTNICKY LISTY//
00/00/1977,VO032,NO005, PP 0322-0329
THE QUALITY OF LIME FOR OXYGEN CONVERTER STEEL
MAKING, ESPECIALLY IN BOTTOM-BLOWN CONVERTERS
tBISI 16319
000000256202
000000261658
000000308822
000000286652
000000200603
000000200576
000000298907
000000115575
00000011

//HUTNICKY LISTY//
OO/OOil977.VO032.NO005. PP 0335-0339
GEOMETRY OF DRAWING TOOLS FOR DIE DRAWING OF
STEEL PRECISION TUBES
%BISI 16320
KOUTSKY, J.
//HUTNICKY LISTYI/
00/0011977,VO032,NOOOG, PP 0390-0396
THERMOMECHNAICAL WORKING OF MIDIFIED I CR STEEL
FOR THE END BLADES OF STEAM TURBINES
*BISI 16311
PILOUS, V.
I/HUTNICKY LISTY//
00/00/1977,VO032,NO006, PP 0404-0409
METALLURGICAL WELDABILITY OF CORROSION RESISTANT
LOW-CARBON AUSTENITIC STEELS
*BISI 16312
KEPKA, M.
11HUTNICKY LISTY//
OO/OO/lq77,VO032,NOOOG, PP 0415-0419
THE EFFECT OF TI ON THE PROPERTIES OF MN-NI-CR
STEELS
9BISI 1014
KOLARZ, 8,
/IHUTNICKY LISTY//
OO/OO/1978,V----,NO0O5, PP 0316-0312
DEVELOPMENTS IN DESIGNING BLAST FURNACE
INSTALLATIONS
BISI 17763
VALENTA, D.
//HUTNICKY LISTY//
OO/00/197B,V----,NO0O5, PP 0327-0330
STATIONARY MANDRELS ON REELING CHECKED FOR HOT
ROLLING OF SEAMLESS TUBES ON 140rSTIEFEL MILL
BISI 17764
TUREK, J.
//HUTNICKY LISTY//
OOtOO/1981,V----,NO001, PP 0009-0012
SHAPE REDESIGN OF HEAVY SLAB INGOTS AT VITKOVICE
STEEL AND ENGINEERING WORKS
BISI 20296
MACHA, J.
//HUTNICKY LISTY//
OO/OO/1981,V----,NOOO2, PP 0081-0087
EXPERIMENTAL STUDY OF THE EFFECT OF OXYGEN FROM
VARIOUS QUALITIES OF STEEL SCRAP ON THE
DECARBURISATION OF HOT METAL
BISI 20297
KEPKA, M.
t/HUTNICKY LISTY//
00/00/1981,V ----- N0004, PP 0258-0266
EFFECT OF NON-METALLIC INCLUSIONS, GASES AND
TRACE ELEMENTS ON THE PROPERTIES OF STEEL
BISI 20253
000000115667
000000115868
000000115870
000000199694
000000199693'
000000308664
000000308668
000000308678
121

//14UTN KY LISTY/f
00/00/1 411,VOOOB,N----, PP 0535-0539
CONTINUOUS DETERMINATION OF CARBON CONTENT IN
STEEL BATH DURING THE VAKUVIT-RROCESS
*BISI 20378
CHACHALAK, M.
//HUTNICKY LISTY//
O0lQO/l~81,VOOO8,N----, PP 0558-0563
THE INFLUENCE OF SEVERAL FACTORS ON THE QUALITY OF
DEEP-DR,hWING STEELS
*BISI 20377
KOOTZ, T.
//HUTNIK IKATOWICEI//
00/00/1973,VO040,NO002, PP 0001-0006
REDUCTIPN OF SILICON IN A BLAST FURNACE
BISI 131724
PIETRUSZKA, T.
I/HUTNIK IKATOWICE)i/
00/00/1973,VO040,NOO04. PIP 0157-0162
THE EFFECT OF AN ALUMINUM BRONZE COATING ON
THE SERVICE LIFE OF BLAST FURNACE TUYERES
BISI 1456fo
1
PIETRUSZXA, T.
//HUTNIIK IKATOWICE)//.
00/00/1973,VO040,NO004, PP 0157-0162
THE EFFECT OF AN ALUMINIUM BRONZE COATING ON THE
SERVICE LIFE OF BLAST-FURNACE TUYERES
BISI 1456ro
ZIDEK_M.
/lHUTNIK (KATOWICE)//
00/00/1;975,V----,NOOOB, PP 0301-0306
OPTIMIZATION OF ROLLING OF SEMIS FOR MANUFACTURE
OF BILIETS CIRCULAR IN SHAPE
BISI 14505 N
MAZANEK, T.
//HUTNIK (KATOWICEI//
00/00/1975,VO008,NO042, PP 0335-0338
EVALUATION OF A BATCH PROCESS FOR REMOVING
HYDROGEN FROM RAIL STEEL
*BISI 15747
MASLANKA, A.
//HUTNIK (KATOWICEI//
00/00/1975,VO011,NO042, PP 0419-0421
ENGLISH TITLE UNKNO14N
*BISI 15730
MAZANEK, T.
//HUTNIK (KATOWICE)//
00/00/1975,VO042,N----, PP 0335-0338
NUMBERS 8 AND 9
EVALUATION OF A BATCH PROCESS FOR REMOVING
HYDROGEN FROM RAIL STEEL
BISI 1574fa
LESKIEWICZ, W.
//HUTNIK IKATOWICE)//
0O/OO/1977,V----,NOOO6, PP 0268-0273
000000313852
000000084688
000000060871
000000093019
000000041816
000000092420
000000092406
000000108340
000000200600

I ; I
OPTIML" PROCESSING PARAMETERS IN THE COLD ROLLING
OF STRIP
BISI 18433
LLWSZA, J.
I/HUTNIK (KATOWICE)//
00/00/1977.VO014,NO001, PP 0045-0049
INTERNAL STRESSES IN COLD-DRAWN STEEL RODS AND
WIRES
*BISI 17051
GRABIEC, J.
//HUTNIK iKATOWICEI//
OO1OO/1977,V0044,N----, PP 0346-0356
NRS. 7-8
METALLURGICAL PROBLEMS ENTAILED IN PRODUCING
18H2N4MA(WA) STEEL AS DISCUSSED IN WORLD
LITERATURE
BISI 17221
GRABIEC, J.
//HUTNIK (KATOWICEI//
OO/OO/l977,VOO44,N----, PP 0346-0356
NUMBER 7 AND 8
METALLURGICAL PROBLEMS ENTAILED IN PRODUCING
1BH2N4MAlWAl STEEL AS DISCUSSED IN WORLD
LITERATURE
BISI 17221
LLWSZA, J.
//HUTNIK IKATOWICEM
00/001~977,VO044,NOO01, PP 0045-0049
INTERN L STRESSES IN COLD-DRAWN STEEL RODS AND
WIRES
BISI 1T052
MAZANEK, E.
/JHUAIK IKATOWICE)//
00/004977,0044,N0004, PP 0163-0166
EFFECT OF SINTER PROPERTIES ON BLAST FURNACE
COKE R:TE
BISI 1 115
MAMROJ
iK.
//HUT~IK (KATOWICEI//
00/00/ 977,VO044,NGOG]6, PP 0261-0264
A VACUUM TECHNIQUE OF DECARBURIZING
CHROMIUM-NICKEL STEELS
BISI 17222
MAMRO, K.
//HUTNIK (KATOWICE)//
00/00/1977,VG044,NO006, PP 0261-0264
A VACUUM TECHNIQUE OF DECARBURIZING
CHROMI~M-NICKEL STEELS
BISI 1 222 0
I
KOWALE'SKI, M.
//HUT IK IKATOWICE)J/
00/001~977,0044,N0009, PP 0375-0378
ENGLIS~ TITLE UNKNOWN
*BISI 16395 0
000000142723
000000150933
000000152190
000000199465
000000105862
000000151538
000000152972
000000116398
1414

//HUT~IK (KATOWICE)//
00/00/ 977,VO044,NO009, PP 0375-0378
PRELIMINARY STABILIZATION AND SECOND STAGE
SCREEN NG OF SINTER IN THE SINTERING PLANT OF THE
DOSCIU$ZKO IRON AND STEELWORKS
BISI 16395
FERET,JF.
//HJTNIK (KATOWICE10
GO/Oo/ 977,VO044,NG012, PP 0565-0569
ENGLIS TITLE UWNOWN
*BISI ~7066
ZIELINSKI, S.
//HUTNIK (KATOWICEI//
OO/0O/1976,V----,N----, PP 0319-0323
NO.'8/9
MECHANICAL AND CHEMICAL METHODS OF MIX PREPARATION
PRIOR TO ORE SINTERING
BISI 18614
ANTONI, K.
/IHUTNIk IKATOWICEI//
OO/OOJ1978,V----,N----, PP 0323-0327
NO. 819
QUANTITATIVE DETERMINATION OF THE EFFECT OF
LIQUID PIG IRON ON THE CAPACITY OF OPEN-HEARTH
FURNACES
BISI 18615
PAWLIK, T.
//HUTNIK (KATOWICEI//
OO/OO/197B,V----,N----, PP 0330-0336
NO 8/9
THE INFLUENCE OF CHARGE CHARACTERISTICS ON THE
PERFORMANCE OF A TANDEM FURNACE
BISI 181616
MAZUR, A.
//HUTNIK IKATOWICEM
OO/OO/1978,V----,N----, PP 0337-0343
NO~ 8/9
T14E PROPERTIES OF FORGINGS OF 25NF STEEL ROTOR
SHAFTS IN THE LIGHT OF MECHANICAL TESTS AND CRACK
DETECTION METHODS
BISI 18617
KRUCINSKI, M.
//HUTNIK (KATOWICEI//
OO/OO/1978,V----,NOOO7, PP 0281-0285
THE EFFECT OF VACUUM DEGASSING ON THE CONTENT AND
MORPHOLOGY OF NON-METALLIC INCLUSIONS IN BEARING
STEEL
BISI 18611
POSPIECH, k
//HUTNIK (KATOWICE)//
OO/OO/197%V----,NOOtO, PP 0416-0422
CHANGES IN THE WORLD IRON AND STEEL INDUSTRY
BISI 19688
KROL, L.
//HUTNIK IKATOWICEM
OOiOO11979,V----,NOO11, PP 0437-0440
000000142709
000000200612
000000200613
000000200614
000000200595
000000200615
000000259345
000000246619

MODELLING OF THE CHARGE DISTRIBUTION IN THE
BLAST FURNACE THROAT
BISI 19419 0
CHLOND, Z. 000000259902
//HUTNIK IKATOWICE)ii
OO/OO/1979,V----,NOO11, PP 0461-0466
EVAPORATIVE COOLING SYSTEM OF A WALKING-BEAM
FURNACE FOR REHEATING BLOOMS
sisi 1c)616 0
ZIELINSKI, S. 000000259898
//HUTNIK (KATOWICEI//
OO/OO11979,V----,NOO11, PP 04166-0482
THE EFFECT OF ALKALIS ON THE PERFORMANCE OF A
BLAST FURNACE
sisi 1%90
JANAS, M. 000000299645
I/HUITNIK (KATOWICEM
00/0011979,V0001,N--, PP 0022-0024
INTENSIFICATION OF OPEN-HEARTH PROCESS STUDIEO
WITH RESPECT TO ORE CONSUMPTION AND FURNACE
PRODUCTIVITY
BISI 19983
LUIBECKI, K. 000000259906
//HUTNIK IKATOWICE)//
00/00/1979,VO046,NO010, PP 0401-0403
A SYSTEM OF AUTOMATIC PROPORTIONING OF FUEL OIL IN
A BLAST FURNACE
BISI 19734
KRUCINSKI, M. 000000258102
//HUTNIK IKATOWICE)t/
OO1OO/l98O,V----,NO001, PP 0008-0012
THE CONTENTS AND MORPHOLOGY OF NON-METALLIC
INCLUSIONS IN HEAVY FORGING INGOTS
BISI 19769 N
ANIOLA-KIJSIAK, A. 000000279571
//HUTNIK (KATOWICE)//
00/00/1980,V ----- NO001, PP 0050-0055
THEORETICAL PRINCIPLES OF REFINING MOLTEN STEEL
WITH ARGON
BISI 19957
KLISIEWICZ, Z. 000000259352
//HUTNIK (KATOWICEI//
0O/OO/l980,V----,NO004, PP 0135-0139
THE INVESTIGATION AIMED AT IMPROVING THE PURITY
OF RAIL STEEL
BISI 19615
KOSTOLOWSXA, M. 000000279569
//HUTNIK (KATOWICEI//
00/0O/198O,V----,NOOO4, PP 0140-0144
TIME CHARACTERISTIC OF THE PROCESS OF DEOXIDATION
OF LIQUID STEEL BY MEANS OF ALLHINIUM USING AN
OXYGEN CONCENTRATION CELL WITH A SOLID ELECTROLYTE
BISI 19945
KOWALEWSKI, M. 000000259896
//HUTNIK IKATOWICE)//

OO/OO/198O.V----,NOOO5, PP 0186-0189
DETERMINATION OF RELATIVE REDUCIBILITY OF BLAST
FURNACE CHARGE MATERIALS
BISI 1%13
ANIOLA-KUSIAK, A.
JIHUTNIK lKATOWICE)l/
00/00/1980,V----,NO005, PP 0193-0194
ENERGY OF MIXING MOLTEN METAL IN A LADLE USING
ARGON GAS BUBBLES
BISI 1%12
SADOK, L..
I/HUTNIK (KATOWICE)//
OO/OO/19BO,V----,NOOO5, PP 0201-0205
SCALE ADHERENCE TO CARBON STEEL WIRE ROOS
BISI 202%
ANIOLA-KUSIAK, A.
//HUTNIK (KATOWICE)]/
00100/1980,V----,NO011, PP 0433-0436
MASS EXCHANGE RATIO AND ITS EFFECTIVENESS IN THE
REFINING OF SELECTED GRADES OF STEEL
BISI 20133 0
KUlDLINSKI, Z.
I/HUTNIK IKATOWICE)I/
OO/OO/198O,V----,NO011, PP 0436-0441
THE STUIDY OF THE CHARACTER AND SPEED OF METAL
STREAMS IN FLAT-TYPE CONTINUOUS CASTING MOULDS
BISI 20134
DOJKA, B.
1/14UTNIK (KATOWICE)//
00/00/1 %O,V----,NO011, PP 0453-0456
X-RAY FLUORESCENT METHOD OF CARBON DETERMINATION
IN CARBON STEEL. PRACTICAL EXPERIMe4
BISI 20287
Z.
-//HUTNIK (KATOWICEI//
OO/OO/198O,VOOO2,N----, PP 0056-0060
THE EFFECT OF CZO CONTENT IN SLAG OF CAF203
SYSTEM OF THE PURITY OF STEEL REFINED BY
ELECTROSLAG TECHNIQUE
BISI 19956
POLOCZEK, W.
//HUTNIK (KAT0141CE)//
OO/OO/198O,VOOO4,N----, PP 0144-0150
THE REMELTING OF METALS IN A PLASMA JET
FURNACE WITH A CASTING MOLD
BISI 19946
JURSZYK, J.
//HUTNIK IKATOWICE)//
00/00/1980,VO047,N----, PP 0389-0395
APPLICATION OF X-RAY FLUORESCENT ANALYSIS TO
FERRO-ALLOYS EMPLOYING THE SAMPLE FUSING TECHNIQUE
BISI 20045
MIT ,KA, B.
/IHUTNIK (KATOWICEI//
00/00/1980,VO047,NO006, PP 021
000000282630
000000305941
000000296231
000000292005
000000305489
000000299643
000000299646
000000303440
000000292016

THE EFFECT OF MECHANICAL TREATMENT ON THE
PHYSICAL PROPERTIES OF BLAST FURNACE COKE
BISI 20106
STACHURA, S.
//HUTNIK IKATOWICE)//
00100/1980,VO047.NOOOG, PP 0224-0229
IMPROVING THE DUCTILITY OF QUENCHED AND iMPERED
STEEL SHEET BY MODIFYING THE SHAPE OF SULPHIDE
INCLUSIONS
BISI 20107
DOROBISZ, J.
//HUTNIK IKATOWICE)//
OOIDO/1980,VG047,NO006, PP 0239-0246
INITIAL EXPERIENCE IN THE OPERATION OF
ANEVAPORATIVE COOLING SYSTEM IN BLAST FURNACE N).
AT THE HUTA KATOUWICE STEELWORKS
BISI 20108
MAZLORKIEWICZ, J.
//HUTNIK IKATOWICE)J/
0010011980,VO047,NO006, PP 0247-0248
TRIALS CONCERNING THE USE OF ROLL INSERTS
IN ROLLING RIM-BAR SECTIONS
BISI 20109
MAZLA9KIEWICZ, J.
//HUTNIK (KATOWICE)//
00/0011990,VO047,NO006, PP 0247-0249
TRIALS CONCERNING THE USE OF ROLL INSERTS'IN
ROLLING RIM-BAR SECTIONS
BISI 20109
POLEK, Z.
//HUTNIK (KATOWICEI/7
00/00/1980,VO047,NO010, PP 0396-0407
A REVIEW OF PUSH-BENCH TUBE MILLS
DSIS 20344
BENESCH, R.
//HUTNIK (KATOWICE)//
00/00/1980,VO047,NO011, PP 0427-0432
A SYSTEM OF OPERATIONAL CONTROL OF THE BLAST
FURNACE PROCESS UNDER DOMESTIC CONDITIONS
BISI 20345 0
JAGLARZ, Z.
//HUTNIK IKATOWICE)//
00/00/1980,VO047,NO011, PP 0441-0453
ROLL-FORMING MILLS PRINCIPLES OF SIZING I-BEAMS
ROLLED WITH FOUR-HIGH MILLS
BISI 20346 0
CHLEBEK, L.
/IHUTNIK IPRAGUEI//
00/00/1975,V----,NO012, PP 0445-0448
SUPPLEMENTARY HEATING ON ORE STANDS
BISI 15205
I
TROJKA, D.
//HUTNIK (PRAGUE)//
OO/0O/1976,V----,NO002, PP 0048-0053
000000292006
000000289635
000000290064
000000291128
000000305955
000000305950
000000305944
00000009302e
000000075092

VEVERKA, V.
//HUTNIK (PRAGUE)//
O,O/0O/1976,V----,NOOO5, PP 0181-0184
PLANENESS OF STRIPS AND SHEETS AND THE POSSIBILI
TIES OF SECURING IT
BISI 15212
HRKINA, K.
/lHUTNIK 1PRAGUE)//
0010011976,V----,NOOOG, PP 0212-0214
EVALUATION OF EXOT14ERMIC FILLINGS FOR THE TREAT
MENT OF KILLED STEEL INGOT HEADS
BISI 15214
VEJNAR, P.
//HUTNIK (PRAGUE)//
00/0011976,VO026,NO001, PP 0008-0012
THE IWLUENCE OF PHYSICOCHEMICAL PROPERTIES ON
THE REDUCIBILITY AND STRENGTH OF PELLETS FROM
NIZNA SLANA CONCENTRATE
BISI 16204
RIHA, K.
/IHUTNIK IPRAGUEM
00/00/1976,VO026,NO005, PP 0170-0173
PROTECTION OF MOULD BOTTOM PLATES WITH A CERMIC
MASS SPRAY BY TOP POURING OF STEEL
BISI 15485
BUJNOCH, J.
//HUTNIK (PRAGUEI//
00/0011976,VO026,NOOOB, PP 0302-0305
EXPERIENCE IN THE CONSTRUCTION AND OPERATION OF
A NEW BILLET MILL IN TRINEC STEELWORKS
BISI 17062
BUJNoCKl J.
~/HUTNIK IPRAGUE)//
00/00/1976,VO026,NO008, PP 0302-0305
EXPERIENCE IN THE CONSTRUCTION-AND OPERATION OF
A NEW BILLET MILL IN A STEELWORKS
*BISI 17062
BECVAR, J.
//HUTNIK (PRAGOEI//
00/0q/1976,VO02 6,N0010, PP 0365-0368
EXPERIENCE WITH SORTING STEEL SCRAP, POLLUTED
WITH SULPHUR: LADLE REFINIkG OF STEEL
MANUFACTURED USING SUCH SCRAP
BISI 16202
BRODA, L,
I/HUTNIK (PRAGUE)//
00/00/1976,VO0216,NO010, PP 0369-0371
DEFORMATION OF THE WORKING SURFACE OF NODULAR
CAST IRON MOULDS
BISI 15558
BRODA, L.
//HUTNIK IPRAGUEJ//
00/00/1976,VO026,NOOIO, PP 0369-0371
DEFORMATION OF THE WORKING SURFACE OF
000000093045
000000093039
000000147495
000000086820
000000142435
000000142719
000000147499
000000087720
000000095746

BISI 15558
BRODA, L.
/IHUTNIK (PRAGUEl/l
00/0011976,VO026,NO010, PP 0369-0371
DEFORMATION OF THE WORKING SURFACE OF NODULAR
CAST IRON MOULDS
8151 15558
BARTECEK, J.'
//HUTNIK (PRAGUEI//
00/00/1976,VG026,NO010, P`P 0372-0374
SEPARATION OF DUST FROM THE COMBUSTION PRODUCTS OF
SMALL ELECTRI-ARC STEELMAKING FURNACES
BISI 16203
KUBENA, J.
//HUINIK IPRAGUE)/l
OOJOO/lq7&,VO02&,NOO11, PP 0410-0414
MODERNIZED CONTROLLERS OF THE TRAVEL OF ELECTRIC-
ARC FURNACE ELECTRODES
BISI 15~23
ZADRAZIL, J.
//HUTNIK IPRAGUE)/l
00/00/1977,VO024,NO004, PP 0154-0158
REDUCING HEAT CONSUMPTION IN METALLURGICAL AND
ENGINEERING FURNACES BY APPLYING CERAMIC FIBRES
BISI 164%
-BORSKY, B.
000000107949
000000115049
000000099318
000000121945
//HUTNIK (PRAGUE)//
00/0011977,VO027,NOOOI, PP 0008-p13
TRANSFER OF THE MELTING PROCESS OF STEEL FOR PIPES
WITH 0.2 PER CENT TO TANDEM FURNACES
BISI 15924
SCHIFFAUER, L,
//HUTNIK IPRAGUEI//
00/00/1977,VO027,NO002, PP 0044-0049
IMPROVEMENT OF EFFICIENCY OF SCREENING OF FINES
FROM S-INTER PRIOR TO BLAST FURNACE BURDENING
BISI 16188
VALENTA, 0.
//HUTNIK (PRAGUEI//
00/00/1977,VO027,NO002, PP 0058-0060
DIMENSIONAL DEFECTS OF PIPES IN OBLIQUE HOT,PIERC
ING
BISI 16189
POLOK, R.
//HUTNIK (PRAGUE)J/
OO/OOtl977,VO027,NO002,-PP 0061-0068
EXPERIENCE ACQUIRED WITH A CHAIN DOUBLETRACK
CONVEYOR FOR SOILS IN THE CONTINUOUS WIRE-ROLLING
MILL AT THE TRINEC IRONWORKS.
BISI 17168
HANIS, H. -
//HUTNIK IPRAGUEI//
00/00/1977,VO027,NO002, pp 74-0078
TwF nFVFLOPMFNT OF POWER AND~NERGY
000000125678
000000115071
000000115051
000000146041
000000099301

IRON AND STEEL MANUFACTURE: SOME ASPECTS OF
RATIONALIZATION OF THE POWER AND ENERGT ECONOMY
BISI 15926 0
LLWES, V. 000000116350
//HUTNIK IPRAGWE)//
00/00/1977,VO027.NO003. PP G087-0090
PRESENT STATE AND TREND OF DEVELOPMENT OF HOT -
BLAST STOVES FOR HIGH TEMPERATURES.
BISI 16332
LUKES, V. 000000116366
I/HUTNIK (PRAGUE)//
00/0011977,VO027,NO003, PIP 0087-0090
PRESENT STATE AND AND OF DEVELOPMENT OF HOT
BLAST STOVES FOR HIGH TEMPERATURES.
*BISI 16332 0
BECVAR, J. 000000121937
//HUTNIK (PRAGUEI//
OO/OOil977,VO027,NO003, PP 0096-0101
SPECIAL FEATURES OF THE TECHNOLOGY OF MAKING
STRUCTURAL STEELS WITH THE ADDITION OF RARE
EARTH METALS.
BISI 16504 0
BECVAR, J. 000000122145
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO003, PP 0096-0101
SPECIAL FEATURES OF THE TECHNOLOGY OF MAKING
STRUCTURAL STEELS WITH ADDITION OF RARE EARTH
METALS.
*BISI 16504
BENDA, 0. 000000115050
//HUTNIK.(PRAGUEI//
00/00/1977,VO027,NO003, PP 0105-0107
SERVICE LIFE OF RECUPERATORS OF THE SOAKING PIT
*BISI 16181,
JANDOS, F. 000000121930
fiHUTNIK (PRAGUEI//
00/00/1977,VG027,NO003, PP 0108-0110
LAMINAR-TYPE DEFECTS ON THE RUPTURED SURFACE OF A
POLL OF 9 CHF STEEL
BISI 16505 N
JANDOS, F. 000000122146
//HUTNIK (PRAGUEl//
00/00/1977,VO027,NO003, PP 0108-0110
LAMINAR-TYPE DEFECTS ON THE RUPTURED SURFACE OF
A ROLL FROM 9 CHF STEEL.
*BISI 16505
MEDRICKY, Z. 000000116502
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO004, PP 0123-0126
OPERATION OF A DRY-QUENCHING STATION FOR COKE
BISI 16315
LANC, 0. 000000147501
//HUTNIK IPRAGUEI//
GO/CrO/1977,VG027,NO004, PP 0132-0134
LINK ING THE COMPUTER SYSTEM OF A CHEMICAL

LABORATORY TO THE SYSTEM OF OPERATIVE CONTROL OF
STEELWORKS
BISI 16316 0
STIHR, J.
I/HUTNIK (PRAGUEI//
00/00/1977,VO027,NO004, PP 0138-0146
OPTIMUM PLANT FOR THE ROLLING OF STRIPS FROM
STEELS OF CLASS 17 UNDER CONDITIONS EXISTING
IN CZEC140SLOVAKIA
BISI 16317 0
PASTRNAK, Z,:"
/1HUTNIK,(PRAGUE)//
00/00/1977,VO027,NO004, PP 0146-0150
WIDENING DURING THE ROLLING OF PLATES
BISI 16318
BENES, 1.
i/HUTNIK IPRAGUE)//
OO/OOtl977,VO027,NOO04, PP 0151-0153
TESTING THE DEFECTS OF TUBES AND RODS.
sBISI 16495 0
BENES, 1.
J/HUTNIK IPRAGUE)/~
00/00/1977,VO027,NO004, PP 0151-0153
TESTING, THE DEFECTS OF TUBES AND RODS
BISI 164035 0
ZADRAZIL, J.
I/HUTNIK IPRAGUEJ//
00100/1977,0027,N0004, PP 0154-0158
REDUCING HEAT CONSUMPTION IN METALLURGICAL AND
ENGINEERING FURNACES BY APPLYING CERAMIC FIBRES.
*BISI 16496
COMAJ, M.
I/HUTNIK (PRAGUEI//
00/00/1977,VO027,NO005, PP 0168-0173
HOT-METAL SPRAYING FOR RENEWING MACHINE PARTS
IN METALLURGICAL WORKS
BISI 16919
COMAJ, J.
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO005, PP 0168-0173
HOT-METAL SPRAYING FOR RENEWING PARTS IN METALL
URGICAL WORKS
elsi 16919
ZURAV, S.
//HUTNIK IPRAGLJE)//
00/00/1977,VO027,NO005, PP 0177-0180
DRYING AND HEATING THE LINING OF 500T MOBILE
HOT PIG-IRON MIXERS.
*BISI 16492
ZURAV, S.
i/HUTNIK IPRAGUE)/l
00/00/1977,VO027,NO005, PP 0177-0180
DRYING AND HEATING THE LINING OF 500 T MOBILE HOT
PIG-IRON MIXERS
000000116508
000000122263
000000122150
000000121928
000000122151
000000124375
000000225238
000000122133
00000012426~)

.'71HUTNIK (PRAGUE)//
00/00/1977,VO027,NO005, PP 0181-0187
ROLLING WIRE FROM CSN GRADE 17 STEEL.
SRISI 16493
KUFA, F.
//*TNIK IPRAGUE)YI
O,O/'0Oj1977,VOO27,NO0O5, PP 0181-0187
ROLLING WIRE FROM CSN GRADE 17 STEEL
BISI 16493
SELOW, B.
/lHUTNIK IPRAGUEI//
OO/dO/1977,VOO27,NOOO5, PP 0188-0192
MEASUREMENT OF THE POWER-FORCE PARAMETERS IN THE
DIAGONAL ROLLING PROCESS WITH A LABORATORY ROLLING
MILL
BISI 16494
SELONK, B.
//HUTNIK (PRAGUEl//
00/0011977,VO027,NO005, PP 0188-0;92
MEASUREMENT OF THE POWER-FORCE PARAMETERS IN THE
DIAGONAL ROLLING PROCESSWITH A LABORATORY
ROLLING MILL.
*BISI 16494
KERWVA, J.
//HUTNIK (PRAGUE)//
OO/OOtl977,VOO27,NOOO5, PP 0193-0194
REFINING SULPHUR IN TRAIL HEATS OF ORIENTED TRANS
FORMER STRIP DURING HIGH-TEMPERATURE ANNEALING IN
ELECTRIC HOOD-TYPE FURNACES.
BISI 16920
KEPKA, M.
//HUTNIK (PRAGUE)I/
00/00/2977,VO027,NO006, PP 0203-0206
EFFECT OF T14E OUTSIDE-FURNACE REFINING MODE ON
CLEANNESS OF CARBON STEEL FOR CRANKSHAFTS.
*BISI 16537
KEPKA, M.
I/HUTNIK IPRAGUE)//
00/0011977,VG027,NO006, PP 0203-0206
EFFECT OF THE OUTSIDE-FURNACE REFINING METHOD ON
PURITY OF CARBON STEEL FOR CRANKSHAFTS
BISI 16537
000000122148
0000001219~5
000000121934
000000122149
000000124376
000000122178
000000141399
SEDIVEC, J. 000000121864
/IHUTNIK 1PRAGUE111
00/00/1977,VO027,NO906, PP 0207-0214
FORMABILITY TESTS AND THEIR UTILISATION
BISI 16485
SEDIVEC, J. 000000122126
//HUTNIK (PRAGUEl//
00100/1977,VO027,NO006, PP 0207-0214
FORMABILITY TESTS AND THEIR UTILIZATION
*BISI 16485
JANDOS, F. 000000121876
//HUTNIK (PRAGUE)/~

00/0011977,VO027,NO006, PP 0215-0219
USEFLLNESS OF TITANIUM IN HIGH-CARBON MNNICP
.AUSTENITIC STEEL
BISI 16486
JANDOS, F. 000000122127
//14UTNIK (PRAGUEI//
00/00/1977,VO027,NO006, PP 0215-0219
USEFUILNESS OF TITANIUM IN HIGH-CARBON MNNICR
AUSTENITIC STEEL.
SBISI 16486 0
PERLIK, J. 000000121872
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO006, PP 0220-0225
INCREASING THE SERVICE LIFE AND OPERATIONAL
RELIABILITY OF LARGE FORGING DIES
BISI 16487 0
BERLIK, J. 000000122128
//HUTNIK IPRAGUE)/l
00100/1977,V0027 NO906, PP 0220-0225
INCREASING THE SiRVICE LIFE AND OPERATIONAL
RELIABILITY OF LARGE FORGING DIRELIABILITY OF
LARGE FORGING DIES
*BISI 16487 0
BURDA, S. 000000122179
//HUTNIK (PRAGUEI//
00/00/2977,VO027,NO006, PP 0226-0231
ELECTROSLAG WELDINIG IN LARGE FORGINGS.
*BISI 16538
BURDA, S. 000000141398
I/HUTNIK IPRAGUE)//
00/00/1977,VG027,NO006, PP 0226-0231
ELECTROSLAG WELDING OF LARGE FORGINGS
BISI 16538
PLAWA, B. 000000121996
/IHUTN IK lPRAGUEl//
00/00/1977,VO027,NO007, PP 0243-0249
EXPERIENCE ACQUIRED OF BLAST FURNACE CONTROL WITH
A COMPUTER
*BISI 16754
URBANEC, M. 000000122122
~/HUTNIK (PRAGUE)//
00100/1977,VO027,NO007, PP 0250-025(o
OPTIMIZATION OF STEELMAKING TECHNOLOGY FOR
ORIENTED TRANSFORMER BANDS
*BISI 16481
URBANEC, M. 000000121873
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO007, PP 0250-0256
OPTIMIZATION OF STEELMAKING TECHNOLOGY FOP ORIEN
TED TRANSFORMER STRIP
BISI 16481
NAJZER, V. 000000122180
//HUTNIK 1PRAGUEll/
00/00/1977,VO027,NO007, PP 0261-0264
ROLLING OF I AND U SECTIONS IN TWO-HIGH MILLS BY

VERTICAL ROLLS
*BISI 16539
NAJZER, V.
I/HUTNIK (PRAGUE)//
00/00/1977,VO027,NO007, PP 0261-0264
ROLLING OF I AND U SECTIONS IN TWO-HIGH MILLS
WITH PANELS WITH UNDRIVEN VERTICAL POLLS
BISI 16539
PASTRNAK, Z.
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO007, PP 0264-0268
APPLICATION OF SLOT TEST OF DETERMINE THE CO
EFFICIENT OF EXTERNAL FRICTION WHEN HOT
ROLLING.,
sBISl 16540
PASTRNAK, A.
//HUTNIK (PRAGUE)/l
00/00/1977,VO027, N0007, PP 0264-0268
APPLICATION OF SLOT TEST TO DETERMINE COEFFICIENT
OF EXTERNAL FRICTION WHEN HOT ROLLING
BISI 16540
KEPKA, M,
11HUTNIK IPRAGUEI//
00100/1577,0027,N0008, PP 0293-0296
COMPARING THE PURITY OF CRANKSHAFT STEEL MADE
IN ACID AND BASIC FURNACES,
*81SI 16541
KEPKA, M.
//KJTNIK (PRAGUE)//
00100/1977,VO027,NOOOB, PP 0293-0296
COMPARING THE PURITY OF CRANKSHAFT STEEL MADE IN
ACID AND BASIC FURNACES.
BISI 16541
SEDIVEC, J.
//HUTNIK PPRAGUE)//
00/00/1977,VO027,NO008, PP 0304-0310i
CLOSING OF INTERNAL CAVITIES BY UPSETTING.
sBISI 16542
SEDIVEC, J.
//HUTNIK (PRAGUEI//
00/00/1977,VO027,NO008, PP 0304-0310
CLOSING OF INTERNAL CAVITIES BY UPSETTING
BISI 16542
FILIP-BUJNACEK, M.
//HUTNIK (PRAGUEI//
00/0011977,VO027,NO009, PP 0326-0329
SIMULTANEOUS BURNING OF NATURAL GAS AND OIL IN A
BLAST FURNACE.
*BISI 16744
BRUK, R.
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NG009, PP 0330-0332
METHODS OF IMPROVING THE HEAT SCHEDULE IN OPEN
HEARTH FURNACES
*BISI 16745
000000141426
000000122181
000000141411
000000122182
000000141429
000600122198
000000141427
000000122025
000000122026

JANAK, 0. 000000121987
//HUTNIK (PRAGUEI//
00100/1977,VO027,NO009, PP 0335-0341
NEW REFRACTORIES MADE BY THE SLOVAK MAGNESITE
WORKS
*GISI 16746 0
BUZEK. Z. 000000146004
//HUTNIK 1PRAGUE)//
00/00/1977,VO027,NG010, PP 0365-0373
DEOXIDATION AND ELECTRIC STEEL PRODUCTION.
BISI 17164 0
RIHA, K. 000000146013
//HUTNIK IPRAGUE)I/
00/00/1977,VO027,NO010, PP 0374-0376
LIGUID DEOXIDIZERS FOR CHEMICAL CAPPING OF
RIMMED STEEL.
BISI 17165
ZIDEK, A, 000000145974
)/14UTNIK (PRAGUEI//
00/00/1977,VO027,NO,010, PP 0377-0379
EFFECT OF ANNEALING ATMOSPHERESON THE PROPERTIES
OF TRANSFORMER STEEL BANDS
BISI 1716fo
VLASTNIK, J. 000000124388
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO010, PP 0384-03q7
DURABILITY OF STEEL UNDER EXTREME CORROSION CON-
DITIONS IN MINES OF THE OSTRAVA-KARYINNA COAL
AREA
BISI 16932
HOSNA, B. 000000122024
//HUTNIK IPRAGUE)//
00/0011977,VO027,NO010, PP 0391-0394
HEATING OF THE WIRE AND DIE DURING DRAWING
*9ISI 16743
PONEVAC, J. 000000155225
//HUTNIK (PRAGUEl/f
00/00/1977,VO027,NO011, PP 0403-0408
THE INFLUENCE OF ENRICHING THE BLAST WITH OXYGEN
UPON THE MANUFACTURE, PROPERTIES AND APPLICATION
OF BLAST FURNACE GAS
BISI 17305
PONEVAC, J. 000000212480
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO011, PP 0403-0408
THE INFLUENCE OF ENRICHING THE BLAST WITH OXYGEN
UPON THE MANUFACTURE, PROPERTIES AND APPLICATION
OF BLAST FURNACE GAS IN.JHE EAST SLOVAKIAN IRON
AND STEEL WORKS
*BISI 17305 0
JENIK, V. 000000146002
I/HUTNIK (PRAGUE)//
00/00/1977,VO027,NO011, PIP 0409-0414
PRODUCTION OF FREE CUTTING BALANCED STEEL WITH
RAISED MN AND S CONTENTS IN TANDEM FURNACES.
BISI 17157 0

SNASEL, M. 000000145989
//HUTNIK (PRAGUE)//
00100/1977,VD027,NG011, PP 0419-0423
CALCULATION OF DEFORMATION OF A TUBE WHEN ROLLED
IN THE SMOOTHING STAND
BISI 9158
SOMMER, B. 000000145997
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NG011, PP 0427-0430
PRESNET-DAY FORGING INGOTS
BISI 17159
DRABINA, J. 000000223751
//HUTNIK IPRAGUE)//
00/00/1977.V0027,N0012. PP 0446-0451
ASSESSING THE MECHANICAL STRENGH OF SINTER BY
DRUM ABRASION AND SHATTER TESTS
BISI 17301 0
PYCHA, P. 000000155143
//HUTNIK IPRAGUE)//
00/00/1977,VO027,NO012, PP 0452-0454
INFLUENCE OF BITUMEN COATING ON THE SERVICE LIFE
OF INGOT MOULDS
BISI 17302 0
SALAK, A. 000000212477
//FPJTNIK 1PRAGUElt/
00/00/1977,VO027,NO012, PP 0457-0460
FERRIC OXIDE RECOVERED FROM EXHAUSTED PICKLING
BATHS: ITS PROPERTIES AND UTILIZATION
*BISI 17300
SALAK, A. 000000223755
//HUTNIK (PRAGUE)//
00/00/1977,VO027,NO012, PP 0457-0460
FERRIC OXIDE RECOVERED FROM EXHAUSTED PICKLING
BATHS: ITS PROPERTIES AND UTILIZATION
BISI 17300
KRAUZ, S. 000000122029
//HUTNIK (PRAGUE)Y/
00/00/1977,VO032,NO007, PP 0498-0503
A CONCEPT OF PROCESSING STEELMAKING SLAGS IN THE
TRINEC IRON AND STEEL WORKS
*BISI 16760
GAJDORUS, 0. 000000183734
//HUTNIK IPRAGUE)//
00/00/1978,V----,NO005,-,P'P 0191-0195
WAYS OF REDUCTION OF DRAWING FORCE IN THE COLO
ORA,WING OF WIRES AND ROOS
BISI 17760
PLANKA, B. 000000145976
//HUTNIK 1PRAGUE111
00/0011978,V0028,N000l, PP 0007-0011
CONTROL COMPUTERS IN BLAST FURNACE OPERATION
BISI 17285
PRANCY, J. 000000145958
//HUTNIK (PRAGUEI//
00/00/1978,VO028,NO001, PP 0013-0021

IN EXTENDING THE MANUFACTURE OF FERROALLOYS
BISI 17286 0
VELICKA, B.
I/HUTNIK IP'RAGUE)//
PO/00/1978,VO021B,N0002, PP 0053-0055
EXTENDING THE LIFE OF STEELMAKING MOULDS BY
PROTECTING THEIR WORKING SURFACE.
BISI 17289 0
VELiCKA, B.
11HUITNIK 1PRAGUEli/
00/00/1978,VO028,NO002, PP 0053-0055
EXTENDING THE LIFE OF STEELMAKING MOULDS BY
PROTECTING T14EIR WORKING SURFACE
sBISI 17289 0
SCHIFFAUER, L.
//14UTNIK (PRAGUEI//
0O/OO/1979,V----,NOOO1, PP 0005-0009
CHANGES IN SINTER SIZE DISTRIBUTION BETWEEN THE
SINTERING PLANT AND THE BLAST FURNACE
BISI 18646
HYSPECKY, L.
I/HUTNIK IPRAGUE)ii
GCl/OO/1979,V----,NOOO4, PP 0152-0156
UTILIZATION OF MICROALLO-YED STEELS IN AUTOMOBILE
INMTRY
BISI 1 B637
VRAGA, J.
//HUTNIK (PRAGUE10
00/0011980,V----,NO012, PP 0446-0449
PROBLEMS OF THE DEVELOPMENT OF AGGLOMERATION
TRUCKS
BISI 20079
VLASAK, J.
//HUTNIK (PRAGUP//
OO/OO/1981,V----,NO0O4, PP 0121-0123
THE PRESENT STATE IN THE ECONOMY OF SCRAP METAL
IN CZECHOSLOVAKIA AND THE TREND IN BENEFICIATION
BY THE METAL SCRAP INDUSTRY
BISI 20374
MAINDA, E.
//HUTNIK (PRAGUE)//
OO/OO/1981,V----,N0OO4, PP 0134-0137
CLOSED-CIRCUIT TELEVISION IN A STEELMAKING SHOP
BISI 20375
VESELY, R.
//HUTNIK IPRAGUE)//
00/00/1 %1,V----,NO005, PP 0163-0171
UTILIZATION OF HORIZONTAL SLIDING PROBES TO CHECK
AND CONTROL COUNTERCURRENT FROM THE TOP IN A BLAST
FURNACE
BISI 20272
WEGRZYN, J.
//HUTNIK - KATOWICE//
000000146036
000000212485
000000200611
000000200601
000000288623
00000030593e
000000312465
000000308651
000000162955

THE INFLUENCE OF HYDROGEN UPON THE STRESS
CORROSION OF AUSTENITIC STEELS AND BRASS, AND
ALSO THEIR WELDED JOINTS
C.E. TRANS 7362
GORNIk, S.
//HUTNIK KATOWICE//
OOiOO/1973,VO040,NO003. PP 0130-0136
SURFACE DEFECTS IN LOW-C AL-KILLED
SHEET AND STRIP
BISI 13086
MASLANKA, A.
//)AUTNIK KATOWICE//
00/00/1975,VO042,NO011, PP 0419-0421
TWO-LAYER SINTERING OF IRON ORES
BISI 15730
KROL, L.
//HUTNIK KATOWICE//
00/00/1976,VO043,NO011, PP 0473-0476
TESTING THE SUITABILITY OF CHARGE MATERIALS FOR
THE BLAST FURNACE PROCESS
BISI 15314
SZWEJ, H.
//HUTNIK KAT0141CEII
00100/1977,VO044,N----, PP 0307-0310
NL"3ERS 7 AND 8
EFFECT OF ELECTROSLAG REMELTING (ESR) ON THE PRO-
PERTIES OF HEAT-TREATMENT ALLOYED STRUCTURAL
STEELS
BISI 1&251
LUBUSKA, A.
//HUTNIK KATOWICE//
00/00/1979,V ----- N0001, PP 0033-0038
TECHNOLOGICAL METHODS OF IMPROVING MECHANICAL
PROPERTIES AND WEAR RESISTANCE OF WELDABLE
CONSTRUCTIONAL STEELS
BISI 19982
WOSIEK, E.
I/HUTNIK KATOWICE//
00/0O/1979,VO0O1,N----, PP 0025-0028
MECHANICAL PROPERTIES OF EXPLOSIVELY PREJOINED
CLADDED SHEETS
BISI 19984
NOWAKOWSKI, A.
//HUTNIK KATOWICE//
00/0011979,VO012,N---- I PP 0489-0494
STEEL STRIP TEMPERATURE RISE IN HIGH SPEED
COLD-ROLLING
BISI 19962 N
GOLA, W.
//HUTNIK KATOWICE//
OO/OCl/1979,VOO)2,N----, PP 0494-0500
THE EFFECT OF SURFACE ROUGHNESS AND PROCESS
LL93PICANT ON LOW-CARBDN STEEL STRIP DEEP PRESS
FORMING WORKABILITY
BISI 19961
000000012214
000000094583
000000075155
000000118521
000000302227
000000310052
000000310051
000000310043

KRASAWCEW, 1. N.
//HUTNIK KATOWICE/f
00/0011980,V----,NO002, PP 0047-0050
PULVERIZED COAL AS A MEANS FOR CONTROLLING THERMAL
CONDITIONS IN A BLAST FURNACE
BISI 19768 0
LVOVA, H.
1/14UTNIK LISTY//
00100/1976,VO031,NOOOB. PP 0541-0547
FACTS ON THE LIQUID PHASE IN SINTERING ORES
WITH DOLOMITE
BISI 16208 0
RUZICKOVA, Z.
//HUTNIK LISTY/i
00/00/1976,VO031,NO009, PP 0626-0631
NEW POSSIBILITIES FOR UTILIZATION OF STEELWORKS
WASTE
BISI 16207
PALZER, 0.
//HUTNIK LISTYI/
00/00/1976,VO031,NG011, PP 0788-0794
AUTOMATION A 450 MEDIUM SECTION ROLLING TRAIN
BISI 15782
KUNC, J.
11HUTNIK LISTY//
00/00/1976,VO031,NO012, PP 0861-0866
COKING AT ELEVATED TEMPERATURES IN HEATING FLUES.
PART 2. FIELD TRIALS
BISI 16200
SPLICHAL, B.
/IHUTNIK LISTY//
00100/1977,VO032,NO001, PP 0002-0007
A SIMULATION MODEL FOR SOLVING OPTIMUM C
CONDITIONS FOR COKE BURNING IN THE CUPOLA
SBISI 15784
GAJOO91US, 0.
//HUTNIK LISTY//
00/00/1977,VO032,NO001, PP 0028-0032
APPLICATION OF ROLLER DIES FOR DRAWING SQUARE
AND RETANGULAR SECTIONS
BISI 15786
RIHA, A.
f/HUTNIK LISTY//
00/00/1977,VO032,NO002, PP 0091-0095
THE PROBLEM OF NOISE GENERATED BY ELECTRIC-ARC
STEELMAKING FURNACES IN OPERATION
*BISI 15787
VESCICIK, J.
//HUTNIK LISTYI/
00/00/1977,VO032,NO002, PP 0133-0137
PECULIARITIES OF THE GROOVING OF PARALLEL-FLANGE
BEAMS ROLLED ON ROLLIN6 TRAINS EGUIPPED WITH
UNIVERSAL UNITS
BISI 116197
000000302245
000000199888
000000147500
000000095753
000000115072
000000094594
000000094938
000000094590
000000115053
K

11HUTNIK LISTY/I 0
00100/1977,VO032,NO003, PP 0160-0166
ANALYSIS OF THE TECHNOLOGICAL FUNCTION OF
BLAST FURNACE BURDENING EQUIPMENT
BISI 16193 0
KALOV, M.
//HUTNIK LISTY//
00/00/1977,VO032,NO003. PP 0166-0170
COKE PRODUCTION FORM PETROLEUM AND COKE
CHEMICAL RAW MATERIALS
BISI 16194
RYC, Z.
//HUITNIK LISTY//
00/0011977,VO032,NO003, PP 0194-0199
APPLICATION OF A FLUIDIC COMPONENT WHEN MEASURING
THE SPEED OF POLLUTED AIR AND GAS IN
METALLURGICAL PLANTS
BISI 16195
KEPKA, M.
STAREK, J.
/iHUTNIK LISTY//
00/00/1977,VO032,NO005, PP 0335-0339
GEOMETRY OF DRAWING TOOLS FOR DIE DRAWING DF
PRECISION STEEL TUBES
8151 26320
000000147517
//HUTNIK LISTYI/
00/00/1977,VO032,NO003, PP 0199-0203
ELECTROSLAG REMELTING OF LARGE FORGING
INGOTS
BISI 16196
RIMAN, A.
//HUITNIK LISTY//
00/00/1977,VO032,NO010, PP 0692-0699
THE PROBLEM OF THE EFFECT OF HEAT LOSSES ON THE
FALL IN TEMPERATURE OF METAL IN A STEELMAKING
LADLE
BISI 17160
MAJERCAKOVA, A.
//HUTNIK LISTY/I
00/00/1977,VO032,NO012, PP 0877-0881
A STUDY Ot THE KINETICS OF THE REDUCTION OF THE
FE-MN-O SYSTEM WITH GASEOUS REDUCING AGENTS
BISI 17155
JASINSKY, Z.
I/HUTNIK LISTY//
00/0011977,VO032,NO012, PP 0887-0895
MEASUREMENT OF SEVERAL PHYSICAL PARAMETERS OF THE
STEELMAKING LANCES IN THE TESTING LABORATORY OF
VZKG
BISI 17288
HEBDA, B.
//HUTNIK PRAGUE//
00/00/1974,VO024,N----, PP 0453-0455
FINISHING CONDITIONS WHEN HOT ROLLING
HYPEREUTECTOID CARBON STRIP
BISI 13491
000000198887'
000000198875
000000147512
000000145967
000000151247
000000145970
000000019067

/IHUTNIK PRAGUE//'\,
00100/1974,VG024,NO004, PP 0141-0145
ADJUSTMENT OF:ROLLS DURING PASS IN FOUR HIGH
ROLLING MILLS FOR HEAVY PLATES
BISI 12977 0
RYC, Z.
11HUTNIK PRAGUE//
00/00/1975,VO025,NO002, PP 0056-0060
ENERGY CHARACTERISTICS OF AN ARC FURNACE
HB %27 0
GOTTFRIED, K.
//14UTNIK PRAGUE0
00/00/1976,VO026,NO004, PP 0135-0138
CRUDE ARGON USED AS A STEEL REFINING ELEMENT
BISI-15484 0
TEJZR, L.
//HUTNIK PRAGUEY/
00/0011976,VO026,NG007, PP 0243-0245
CHANGES IN THE COMPOSITION OF STEEL-MAKING PIG
IRON IN THE COURSE OF TAPPING
BISI-15489 0
PETROS, J.
/IKJTNIK PRAGUE//
00/00/1976,VO026,NO007, PP 0246-0252
EFFECT OF STEEL-SCRAP GUALITY ON THE GUANTITY
AND COMPOSITION OF TANDEM-FURNACES DUST
BISI-15552
KEPKA, M.
//HUTNIK PRAGUE//
00/00/1976,VO026,NO007, PP 0252-0255
THE EFFECT OF DEOXIDATION WITH SICA ON THE
PROPERTIES OF L014-ALLOYED HEAT-RESISTANT GAST
STEEL CSN
BISI-154'90
PETRMAN, 1.
//HUTNIK PRAGUE//
00/00/19716,VG026,NOOOG, Pp 02%_001
ELECTROSLAG CASTING OF METALS
BISI-15554
BOUZEK, J.
/IHUTNIK PRAGUE//
00/0011976,VO026,NO008, PP 0305-0309
PRECISE CALCULATION OF COOLING TIME OF A
PRODUCT ON COOLING BEDS OF SECTION ROLLING MILLS
BISI-15555
BRAZDIL, V.
//HUTNIK PRAGUE//
00/00/1976,VO026,NO009, PP 0348-0352
HOT FORMABILITY OF A 12 PER CENT CR PLUS STEEL
BISI-15557
GOCAL, J.
//HUTNIK PRAGUE/I
00/00/1976,VO0216,NO010, PP 0375-0380
OPTIMING OF PIPE PRODUCTION IN THE
4
000000096856
000000077731
000000077847
000000077732
000000077730
000000077943
000000077839
000000077851
000000077841

SZCZLO(A, R.
/IHUTNIK PRAGUE//
00100/1976,YO026,NO010, PP 0388-0391
EXPERIENCE WITH THE MANUFACTURE OF LOW-CARBON
STEEL MICRO-ALLOYED WITH BORON AND TITANIUM FOR
HIGH-STRENGTH BOLTS
BISI 15789
TEINOL, R.
//kUTNIK PRAGUE/l
00/00/1976,VG026,NO011, PP 0416-0420
ROLLING TECHNOLOGY AND HEAT TREATMENT OF
WEAMLESS TUBES MADE FROM VERY LOW CARBON STEEL
BISI 15791
KOZLER, V.
/IHUTNIK PRAGUE//
00/00/1976,VOOA,NOOII, PP 0425-0429
CENTRIFUGALLY CAST MULTI-LAYER ROLLS
GISI 16201
HOSNA, B.
//RJTNIK PRAGUE//
00/00/1976,VO026,NO011, PP 0432-0436
CALBULATION OF THE DRAWING FORCES WHEN DRAWING
ROUND WIRE
BISI .15793
KAFKA, V.
//HUTNIK PRAGUE//
00100/1976,VO026,NO012, PP 0456-0469
THE RELATION OF THE PAYMENT TO THE FURNACE
CREW TO THE COST OF STEELMAKING
BISI 15795
HAVLIK, V.
//HUTNIK PRAGUE//
00/00/1976,VO028,NO008, PP 0336-0339
EXPERIENCE GATHERED BY APPLYING VARIOUS REFRACTORY
MATERIALS IN THE VACUUM-DE GASSING STATION
AT THE VZKG
BISI 1555-6
VRBA, J.
//HUTNIK PRAGUEJ/
00/00/1977,VO027,NO001, PP 0031-0035
RATIONALIZATION AND NEW TRENDS IN T14E
EVALUATION OF POWER CONSUMPTION IN METALLURGY
BISU 15799
ZAMYSLOVSKY, Z.
//HUTNIK PRAGUE//
00/00/1977,VO027,NOOOB, PP 0297-0303
CALCULATION OF WIDENING WHEN ROLLING SGUARE AND
ROUND BILLETS ON AN 850 REVERSING MILL
BISI 16924
BRODA, L.
//HUTNIK PRAGUE//
OO/OO/198O,V----,NOOll, PP 0409-0414
MELTING Or STEEL WITH ELEVATED C-CONTENT F
000000094585
000000094936
000000118519
000000094937
000000094931
000000094965
000000094932
000000124380
000000302230

WRES IN 250T MB-FURNACES AND CASTING INTO 6.7 T
INGOTS
BISI 19937
BEMBENEK, A.
/IHUTNIK PRAGUE//
()0/00/1980,V----,NO011, PP 0418-0424
MODERNIZATION OF TRHE TECHNOLOGICAL PROCESSES OF
MANUFACTURE OF SEAMLESS TUBES
BISI 19938
PIETRZYK, J.
//HUTNIKIKATOWICE)Y/
0O/00/1974,V0O41,N----, PP 0357-0365
NL"3ERS 7 AND 8
THE AGING PROCESS IN SHEETS OF RIMMING CONVERTER
STEEL AFTER COLD WORK IN THE FINISHING PASS
BISI 15880
MADEJ, J.
//HUTNIK//
00/00/0000,V----,N----, PP 0143-0154
OPTIMALISATION IN CALIBRATING ROLLERS OF OBLIQUE
PIERCING ROLLING MILLS
BISI L.STG 10790
ZACHARZEWSKI, B.
I/HUTNIK//
00/00/1953,VG020,N----, PP 0083-0093---
REGENERATION OF CONSTITUTES OF SINTERED CARBIDE
SCRAP
BISI 8581 0
VOJTOVSI(Y JR,
//HUTNIK//
00/00/1964,V0014,140002,
ROLL PASS DESIGN FOR ROLLING RAILWAY RAILS
T.SC P. 0. RA-75-35 0
GROBICKI, W.
//HUTNIK//
00/0011%4,VO031 N----,
NUMBERS 7 AND 8
STUDY OF RAIL QUALITY IN THE USSR AND MEANS OF
LENGTHENING THEIR WORKING LIFE
TSC P.O. RA-75=35
GROBICKI, W.
//HUTNIK//
00/00/1%4,VO031,N----, PP 0007
STUDY OF RAIL QUALITY IN THE USSR AND MEANS OF
LENGTHENING THEIR WORKING LIFE
TSC RA-75-35
PIERCHALA, K.
//HUTNIK//
OO/OO/l9fa5,V----,NO006, PP 0205-0207
PROTECTION FROM FORMATION OF EXPLOSIVE MIX OF
GASES IN THE SPACE BETWEEN THE THROAT BELLS OF A
BLAST FURNACE
BISITS,
CHECHURA, F.
//HUTNIK//
000000302222
000000099287
000000227349
000000211517
000000196104
000000196106
000000235577
000000211313
000000196105
A

It
00 / 00 / 1%5. VOO 15, N0004,
SUSCEPTIBILITY OF RAIL STEEL TO FLAKE FORMATION
TSC P.O. RA-75-35
CECHLh9A, F.
//HUlTNIK//
00 100 / 1%5, V 00 15, NOO04,
SUSCEPTIBILITY OF RAIL STEEL TO FLAKE FORMATION
TSC RA 75-35
WOSKOBOINIKOV, V. G.
//HUTNIK/I
GO/O0/1%7,VOO34,N----, PP 0498-0506
TECHNOLOGY OF THE BLAST-FURNACE PROCESS WITH
NATURAL GAS AND COAL DUST INJEC" TION AND OXYGEN
ENRICHED BLAST
CRL T/6826
MAZANEK, E.
i/HUTNIKI/
OO/OO/1%9,VOO3f6,N----, PP 0001-0007
THE EFFECTS OF ZINC ON BLAST FURNACE
OPERATION AND ON THE FORMATION OF SCAFFOLDS
CRL T6497
MASLA4A, A.
//HUTNIKI/
00100/1 %9,VOO36,N----, PP 0057-0062
THE IMPORTANCE OF COARSE-GRAINED COMPONENTS OF A
SINTER MIXTURE AS PELLET NUCLEI AT THE INITIAL
PELLETIZING
BISI 10727 0
SEFFL, L.
//HUTNIK//
00/00/1970,VO020,NO010, PP 0367-0371
TEEMING POWDERS AND SLAPS
CRL T7813 0
KLIMEK, J.
//HUTNIK//
OO/OO/197O,VOO37,N----,lPP 0438-0444
CALCULATING HEATING FURNACES INDICES
BISI 11652
KLIMEK, J.
I/HUTNIK//
OO/OO/197O,VOO37,N----, PP 0438-0444
AN INDEX FOR FURNACE COMPARISON
BISI:L.STG 11652
`TROJKA, D.
/ /kUTN I K / /
OO/OO/1971,VOO21,N----, PP 0041-0048
UCTURE OF COMMERCIAL SILICOMANGANESE
BISI L.STG 4.00 11972
VOJKOVSXY, J.
//HUTNIK//
00/00/1971,VO021,N----, PP 0221-0225
ROLL PASS DESIGN FOR ROLLING UE-BEAMS
BISI 9961
000000235578
000000138331
000000212367
000000157227
000000144552
000000168034
000000178232
000000174209
000000272815

//HUTNIK//
OO/DO/1971,VO021,N----, PP 0396-0401
OPERATION PRE CONDITIONS FOR ADOPTING AUTOMATIC
SINTER QUALITY CONTROL
BISI 10295
KOWALEWSKI, M. 0000002688201r
//HUTNIK//
00/00/1971,VO038,N----, PP 0131-0137
LAB TESTS ON THE EFFECT OF INITIAL HEATING OF THE
MIXTURE ON THE AGGLOMERATION PROCESS
NTC-73-,12289, NLL RTS 7174
BARBAKADZE, CU. 000000032153
//HUTNIK//
00/00/1972,V----,NO006, PP 0203-0208
NO ENGLISH TITLE
BISI 11263
MEDRICKY, Z. 000000000928
//HUTNIK//
00/00/1972,V----,NG009, PP 0321-0326
POSSIBILITIES OF STABILISATION OF THE MECHANICAL
PROPERTIES OF COKE
BISI 11055
ADAMEK, F. 000000011163
/IHUTNIK//
OOiOO/1972,V----,NO012, PP 0447-0452
THE QUALITY OF KILLED STEELS MADE IN VITKOVICE
IRON AND STEEL WORKS TANDEM FURNACES
BISI 11385.,
KEPKA-, M. 000000210513
f/HUTNIK//
00/00)l972,VO022,N----, PP 0012-0017
THE EFFECT OF RARE-EARTH METALS ON THE STEEL
BISI 10539

BORSKY, B. 000000211464
//HUTNIK//
00/00/1972,VO022,N----, PP 0055-0060
EXPERIENCE WITH THE MANUFACTURE OF MILD KILLED
STEELS IN TANDEM FURNACES
BISI 10921
STYBLO, K. 000000271325
//HUTNIK//
00100/1972,VO022,N----, PP 0064-0069
PRESENT DEVELOPMENT OF CONTINUOUS MILL TRAINS
FOR COLD POLLING SUFT PLAIN CARBON STEEL STRIPS
BISI 10923

JECILICKA, J. 00000017822(~
I/HUTNIK//
00/00/1972,VO022,N----, PP 0069-0076
A NEW METHOD OF ROLL PASS DESIGN IN THE BLOOMING
MILL
BISI:L.STG 10924

RUZICKA, B. 000000161874
//HUTNIK//
00/0011972,VO022,N----, PP 0113-0115
STEEL PRODUCERS REQUIREMENT FOR LIME USED IN

IL
BISI 10914
TICHY, J.
I/HUTNIK//
00100/1972,VO022,N----, PP 0121-0123
STRAIN AGING OF C&N 11 342 AND 11 373 RIMMING
STEELS MADE IN TANDEM FURNACES
8ISI:L.STG 1091fo
MRAJCA. V.
//HUTNIK//
OO/OO/1972,VOCl22,N----, PP 0129-0130
AUTOMATION OF THE PRINCIPAL METALLURGICAL
SHOP'S OF THE TRINEC IRONA AND STEEL WORKS
BISI 10918
YESELY. R.
//14UTNIK//
OO/OO/1972,VOO22.N----, PP 0153-0156
NEW SYSTEM FOR CHECKING THE TECHNOLOGY OF A
BLAST FURNACE PROCESS
BISI 11038
14AMOUZ, Z.
//HUTNIK//
00/0011972,VO022,N----, PP 0180-0184
PULSE BURNERS FOR INDUSTRIAL FURNACES
BISI L.STG 5.00 11040
PETROS. J.
//HUTNIK//
0010011972,VO022,N----, PP 0209-0211
NEW KNOWLEDGE ON RAW MATERIALS CHARGED INTO
TANDEM FURNACES
BISI 11042
MINARIK, J.
/lHUTNIK//
00/00/1972,VO022,N,---l PP 0213-0217
THE COURSE OF THE ROLLING STOCK TEMPERATURE ON
CONTINUOUS SECTION OF ROLLING MILLS
BISI 11043
PAVELKA, J.
//HUTNIK//
00/00/1972,VO022,N----, PP 0218-0220
RATING THE EFFICENCY OF STRIP PROCESSING
BISI L.STG 3.00 11044
SMID, L.
//HUTNIK//
00100/1972,VO022,N----, PP 0228-0232
APPLICATION OF-SIMULATION IN THE ORGANIZATION
OF STEEL PLANT OPERATION
BISI:L.STG 11046
SCHMIDT, H.
~/HUTNIK//
00/00/1972,VO022,N----, PP 0248-0252
FETTLING OF BLAST FURNACE SHAFT BY GUNTING
81SI 11048
000000173256
000000198012
000000211511
000000174900
000000203939
000000227660
000000163081
000000174485
000000203929

I /HUTNIK/ / 11-1 1
00/OQ/1972,VO022,N----. PP 0256-0258
A CONTRIBUTION TO THE METALLURGY OF LD PROCESS
IN VSZ STEEL PLANT
BISI 11646
RUSNAR, J. 000000268838
//HUTNIK//
0010011972,VO022,N----, PP 0256-0256
A CONTRIBUTION TO THE METALLURGY OF LD PROCESS
IN VSZ STEEL PLANT
BISI 11646
TICHOPADOVA, E. 000000213160
/INUTNIK//
OO/OO/j972,VOO22,N----, PP 0287-0288
THE EFFECT OF LEAD, SELENIUM AND TELLERIUM
ADDITIOAS ON ENVIRONMENTAL AIR AND HUMAN HEALTH
BISI L.STG 11052 0
TICHOPADOVA, E. 000000216488
/IHUTNIK//
OO/OO/1972,VOO22,N----, PP 0287-0288
THE EFFECT OF LEAD, SELENIUM AND TELLERIUM
ADDITIONS ON ENVIRONMENTAL AIR AND HUMAN HEALTH
BISI L.STG 11052 0
PAHUTA, P. 00000017~390
//HUTNIK/I
00/00/1972,VO022,N----, PP 0297-0299
THERMOMECHANICAL TREATMENt OF STEELS 9 PP
BILL L.STG 9023,19:VR 10fo/72 0
JELC, 1. 000000268826
//HUTNIKII
00/0011972,VO022,N----, PP 0331-0335
POSSIBILITIES OF REDUCING THE')'INGOT CONSUMPTION -
MOULD
BISI 11647
BEDRICH, J. 000000210441
//HUTNIK//
00/00/1972,VO022,N----, PP 0336-0338
LONG-TERM MEASUREMENT OF BATH TEMPERATURE IN
50 7 OPEN-HEARTH FURNACE
BISI 11071

ENGST, A. 000000210413
//HUTNIK//
GOtOO/1972,VOO22,N----, PP 0347-0355
EFFECT OF HEAT TREATMENT ON THE PROPERITIES
OF HIGH SPEED TOOL STEELS 23 PP
8LL:L.STG 9023.19:VR 111/72,
SOTOLA, F. 000000210444
//HUTNIK//
00/0011972,VO022,N----, PP 0371-0376
CLEANING OF TANDEM FURNACE WASTE GASES
BISI 1102fa
PESHAT, V. 000000204031
//HUTNIK//
00/00/1972,VO022,N----, PP 0389-0393
PROTECTION OF BLAST FURNACE AUXILIARIES FROM

Bisi 11028
MUTINA. Z.
I/HUTNIK//
00/00/1972,VO022,N----, PP 0420-0427
MEASUREMENT AND MEASURING INSTRUMENTS IN PLATE
ROLLING MILLS
BISI 11261
STYBLO. K.
//HUTNIK//
00/00/i972.VO022,N----, PP 04218-0430
EFFECT OF DYNAMIC LOAD ON THE CHANGE IN
REVERSIBLE DEFORMATION OF ROLL STAND AND THE
ACCURACY OF ROLLED PRODUCT
BISI:L.STG AS 11262
ADAMEK, F.
//HUTNIK//
00/00/1972,VO022,N----, PP 0447-0451
THE QUALITY OF KILLED STEELS MADE IN VITKOVICE
IRON AND STEEL WORKS TANDEM FURNACES
BISI L.STG 11385 0
CERVENY, E.
//HUTNIK//
00/00/1972,VO022,N----, PP 0452-0457
PRESENT POSSIBILITIES IN CZECHOSLOVAKIA FOR
ROLLING 1000 MILLIMETERS WIDE STEEL BANDS MADE
OF AUSTENITIC STAINLESS STEEL GRADES
BISI 1.138(a
SMID, V.
//HUTNIK//
00/00/1972,VO022,N----, PP 0462-0466
POSSIBILITIES OF IMPROVING THE QUALITY AND OF
COMBINING THE RESULTANT PROPERTIES OF LOW ALLOW
WELDABLE STRUCTURAL STEELS
8151 11367
KEPKA, M.
//HUTNIK//
00/00/lc)72,VO022,N----, PP 0877-0879
THE PRESENT STATE AND THE PROSPECTS OF
ELECTROSLAG REMELTING OF STEELS AND ALLOYS
BISI 11027
MACAK, M.
//HUTNIK//
00/00/1972,VO022,NO007,
EXPERIENCE IN THE PRODUCTION OF WEAR RESISTANT
RAIL STEEL WITH INCREASED MN. CONTENT
JPRS FOR DOT/TSC
JELC, 1.
//14UTNIK//
00100/1972,VO023,N----, PP 0331-0335
POSSIBILITIES OF REDUCING INGOT MOULD CONSUMPTION
BISI 11647
KOHUT, S.
//HUTNIK/I
00/00/1973,V----,NO005, PP 0182-0184
000000206226
000000177404
000000178929
000000178936
000000161854
000000210442
000000103544
000000271327
000000003504

CONTINUOUS ENTRY ANNEALING OF AUSTENITIC CR-Nl
STEEL BAND 4 PP
BISI 12048
PYS, R. 000000024562
//HUTNIK//
00/00/1973,V----,NO010, PP 03fol6-0369
INCREASING THE LIFE OF STACKS OF THE BLAST
FURNACE AT NHXJ
BISI 12491 0
KEPKA, M. 000000006393
//HUTNIK//
00/00/1973,V---- NO010, PP 0370-0373
THE ORIGIN AND F4RMABILITY OF NON-METALLIC
INCLUSIONS IN STEEL
BISI 12492 0
KREUZBERG, B. 000000032098
//HUTNIK//
GO/O0/1973,V----,N0O11, PP 0421-0429
WALKING BEAM FURNACES IN THE ROLLING PLANTS
BISi 12484 0
KEPKA, M. 000000006402
//HUTNIK//
00/00/1973,V----,NO012, PP 0450-0455
MAKNG OF STEEL CSN 12 040 FOR CRANKSHAFTS IN
A 251,T ARC FURNACE
BISFQ48fo 0
HROCH, P. 000000012274
//HUTNIK//
'00/00/1973,V----,NO612, PP 0466-0470
ANISOTROPY OF COPPER PLATES
BISI 12487
KONUT, S. 0000001573 7
//HUTNIK//
00/06/1()73,VO023,N----, PP 0182-0184
MEIHODS OF INDUCING STRIP ANNEALING IN AUSTENITIC
CHROMIUM STEEL
BISI 12048
CHOURA, L. 000000142339
//HUTNIKI/
00/00/1973,VO023,N ----- PP 0337-0340
ELECTROMAGNETIC CHILL MOULD
MET/ 318
PYS, R. 000000192970
I/HUTNIK//
00/00/1973,VO023,N----, PP 036~-0369
INCREASING THE USEFUL LIFE OF FURNACE STACKS
BIISI 12491
KEPKA, M. COOOQO192971
//HUTNIK//
0O/OO/1973,VOO23,N'--, PP 0370-0373
ORIGIN AND INFLUENCE OF NON-METALLIC INCLUSIONS
IN STEEL
BISI 12492
PACUN, J, 000000197447

/HUTN I K I/
00100/1973,VO023,N----, PP 0379-0384
DEEP DRAWING OF STEEL SHEET KOSMALT DURING
SINGLE LAMINATED ENAMELLING
sBISI 12493 0
TICHY, J. 000000197448
//HUTNIKI/
00/00/1973,VO023,N----, PP 0388-0393
DECARBURIZATION ZONES IN EUTECTOID STEELS
CSN 12 090 AND 161090 ROLLED IN A
CONTINUOUS LINE P 360 NHKG
*BISI 12494 0
BORSKY, B. 000000192965
//HUTAIK// -
00/00/1()73,VO023,N----, PP 0407-0417
EVALUATION OF THE MANUFACTURE OF THE
METALLURGICAL FACTORS IN STEEL EXTRACTED
AND PERFORMANCE IN THE MAERZ BOELANS FURNACE
BISI 12483
KREUZBERG, V. 000000197445
I/HUTNIK//
00/00/1973,VO023,N----, PP 0421-0429
CONTROLLING'THE FURNACE HEATER DURING ROLLING
IBISI 12484
VESELY, J. 000000192963
I/HUTNIK//
OO/OO/1'973,VOO23,N----, PP 0443-0449
MANUFACTURE OF SINTER OF HIGH BASICITY
BISI 12485
KLEPKA, M. 000000192966
//HUTNIK//
00/00/1973,VO023,N----, PP 0450-0455
MANUFACTURING CSN 12140 STEEL FOR SHAFT
WHEN REFINED IN THE ARC FURNACE WHEN,
REFINED OUTSIDE THE FURNACE
BISI 12485
HROCH, P. 000000192967
/IHUTNIK//
00/00/1973,VO023,N----, PP 0466-0470
ANISTROPY OF COPPER PLATED SHEET
BISI 12487
BORSKY, B. 000000011250
//HUTNIK//
00/00/1973,VO023,NO011, PP 0407-0417
ASSESSMENT OF METALLURGICAL FACTORS
AFFECTING EFFICIENCY AND PRODUCTIVITY
IN THE M8 STEELMAKING FURNACE
BISI 12483
VESELY, J. 000000002003
//HUTNIK/f
00/00/1973,VO023,NO012, PP 0443-0449
PRODUCTION OF HIGH BAS.ICITY SINTER
BISI 12485
GORNIK, S. 000000145296
I/HUTNIK//

I
00100/1973,VO040,N----, PP 0130-0136
SURFACE DEFECTS IN SHEETS AND STRIPS OF LOW
CARBON STEEL KILLED BY ALUMINIUM ADDITION TO THE
INGOT MOULD
BISI 13086
KOOTZ, T. M 000041971
//HUTNIKI/
00100/1973.VO040,NO002, PP 0001-0006
REDUCTION OF SILICON,,,IN A BLAST FURNACE
*BISI 13724
GORNIK, S. 000000026959
I/HUTNIKI/
OO/O0/1973,VO040,NOOb3, PP 0130-0136
SUiRFACE DEFECTS IN SHEETS ANS STRIPS
OF LOW CARBON STEEL KILLED BY ALUMINUM
ADDITION TO THE INGOT MOULD
BISI 13086 0
VOLNY, J. OU000021413
11HUTNIK//
OOiDO/1974,V----,NO002, PP 0041-0045
EFFECT OF THE SHAPE OF NOZZLES AND THE STEAM
PRESSLPE ON THE EFFICIENCY OF FUMELESS CHARGING
OF COAL INTO COKE OVENS
BISI 12625 0
RUSNAK, J. 000000012547
//RJTNIK/ i
00/00/1974,V----,NO003, PP 0097-0100
THE DEVELOPMENT OF OXYGEN CONVERTER LINING IN
STEEL PLANT NO L-EAST SLOVAKIAN IRON AND STEEL
WORKS KOSICE
*BISI 12833
DEKANOVSKY, A. 000000005171
/ /HUTNIK/ /
00/00/1974,V----,NO003, PP 0100-0105
NEWLY DEVELOPED STEELS IN THE EAST SLOVAKIAN
IRON AND STEEL WORKS KOSICE
*BISI 12832

GLATZ, B. 000000021334
//HUTNIK//
00/00/1974,V----,NO004, PP 0129-0136
STEEL FOR THEMAIN PARTS OF THE PRIMARY
CIRCUITS OF PRESSURIZED WATER NUCLEAR
POWER PLANT REACTORS
BISI 12976
SMETANA, 0. 000000216222
//HUTNIK//
O0/0O/1974,V----,W)CO4, PP 0141-0145
ADJUSTMENT OF ROLLS DURING PASS IN FOUR HIGH
ROLLING MILLS FOR HEAVY PLATES
BISI 12977
CINTL, P. 000000021332
/IHUTNIK//
00/00/lc)74,V----,NOO,05, PP 0163-0171
HOT BLAST STOVES OF CLASSIC DESIN AND
POSSIBILITIES OF THEIR RECONSTRUCTION
FOR HIGHER HOT BLAST TEMPERATURE

RDHA, K.
//HUTNIK//
00/00/1974,V----,NO005, PP 0172-0177
CHEMICAL CAPPING OF RIMMING STEEL WITH LIQUID
DEOXIDIZERS
BISI 13185
KEPKA. M.
1 //HUTNIKY/
00100/1974,V----,NO005, PP 0178-0183
INTENSIFYING STEELMAKING IN ELECTRIC ARC FURNACES
BISI 1318fo
ZIDEK. A.
//HUTNIK//
00/0011974,V----,NO005, PP 0184-0188
THE BRITTLENESS OF TN STRIP'S AFTER HOT
ROLLING AND INITAL ANNEALING
BISI 13192
KOLARZ, B.
//H1UTNIK//
GO/OO'/I'974,V----,NOOO6, PP 0205-0208
THE DESIGN OF LARGE BLAST FURNACES
BISI 13188
BOHM, V.
//HUTNIKI/
GOIDO/1974,V----,NO006, PP 0209-0212
DUST REMOVAL FROM WASTE GASSES IN TRNEC
Ill STEELWORKS
BISI 13302
GLATZ, B.
//HUTNIK//
00/00/1974,V ----- NOOO6, PP 0217-0221
PLATE MANUFACTURED FROM LOW TEMPERATURE
AND CRYOGENIC STEELS
BISI 13190
DEDEK, V.
//HUTNIK//
OO/OO/l974,V----,NOOOf>, PP 0226-0230
CONTINUOUS INTERRUPTED HARDENING OF STEEL STRIPS
BISI 13191
PONEVAC, J.
//HUTNIK//
00/00/1974,V----,NO007, PP 0251-0257
EXPERIENCE WITH PROCESSING OF PELLETS IN THE
EAST SLOVAKIAN IRONWORKDS
BISI 13303
ZDENEK, Z.
/IHUINIK//
00/00/1974,V----,NO011, PP 0410-0412
INDUSTRIAL EXPERIENCE WITH RAMMED LINING
LADLES
BISI 13286
PRNKA, T.
//HUTNIK//
000000067742
000000032116
000000028300
000000021415
000000026971
000000021301
000000032101
000000029343,
000000036099
000000023340

DO/OOil974,V----,NOO11, PP 0413-0418
MANUFACTURE OF PIPES OF CR NI - AUSTENITIC
STEELS FOR HIGH RATED POWER EQUIPMENT
BISI 13377 0
VIOCHNA V.
/ IKJTNIK I I
O0/OO/1974,V----,NOOll, PP 0419-0421
MANUFACTURE OF INGOT MOULDS OF NODULAR
CAST IRON AT THE TZ VRSR TRINEC
BISI 13378 0
DRASTIK, F,
//HUTNIK//
OO/0O/1974,V----,NO011, PP 0427-0432
GRAPHICAL CALCULATING TECHNIQUE IN FORGING SHOPS
BISI 13285
KEPKA, M.
//HUTNIK//
OO/GO/1974,V----,NO012, PP 0446-0452
REFINING OF ALLOYED STEEL WITH ARGON
BISI 13367 0
LAMBERT, E. R.
//HUTNIK//
00/0011974,V----,NO012, PP 0456-0461
HYDROSTATIC EXTRUSION-DRAWING OF HIGH
STRENGTH STEEL WIRE
BISI 13098 0
KOLAR, B.
//HUTNIK//
00/0011974,VO024,N----, PP 0004-0007
NEW TRENDS IN BLAST FURNACE DESIGN
BISI 12560
CHVOJKA, J.
I/HUTNIK//
OO/0O,/1974,VOO24,N----, PP 0018-0022
ULTRASONIC INSPECTION OF PLATE, AND THE EFFECT
OF STEELMAKING TECHNIQUE ON THE OCCURRENCE
OF DEfECTS
BISI 12561
OTTO, J.
//HUTNIK//
00/0011974,VO024,N----, PP 0031-0035
SCARFING AS A SUBSTITUTE FOR PLANNING
CORROSION-RESISTANT STEEL SLABS
BISI 125162
SCHMIDT, H.
//HUTNIK//
00/00/1974,VO024,N----, PP 0245-0250
REQUIREMENTS FOR THE QUALITY OF BLAST FURNACE
COKE
BISI 13179
KOLARZ, B.
//HUTNIK/t
00/00/1974,VO024,NO001, PP 0004-0007
NEW TRENDS IN BLAST FURNACE DESIGN
BISI 12560
000000021361
000000021408
000000216201
000000032094
000000192953
000000196973
000000196974
000000145298
000000024563 :

1 /HUTN I K/ I
00100/1974,VO024,NG001, PP 0008-0015
DEVELOPMENT OF OXYGEN STEELMAKING LANCES FOR
TANDEN FURNACES AT THE VZKG
BISI 12598 0
HAVLIK, V
/IHUTNIK//
00100/1974,VO024,NO001, PP 0016-0018
NEW REFRACTORY BRICKS APPLIED AT THE VSKG
BISI 12594 0
CHVOJKA, J.
//HUTNIK//
00100/lq74,VO024,NOOOI, PP 0018-0022
ULTRASONIC INSPECTION OF PLATE, AND THE EFFECT
OF STEELMAKING TECHNIQUE ON THE OCCURENCE OF
DEFECTS
BISI 12561 N
JANCARIK, J.
//HUTNIK/I
0O/G0/1974,VOO24,NOOO1, PP 0023-0030
A MODERN ROLLING MILL FOR WIRE RODS
BIST 12595
OTTO, J.
/IHUTNIK//
00100/1974,VO024,NO001, PP.0031-0035
SCARFING AS A SUBSTITUTE FOR PLANING
CORROSION-RESISTANT STEEL SLABS
BIS1,125162
SOBOTKOVA, J.
//HUTNIK//
00/00/1974,VO024,NO002, PP 0066-0068
EFFECT OF TECHNOLOGICAL PARAMETERS ON THE
MECHANICAL PROPERTIES AND THE MICRO
STRUCTURE OF BRASS PIPES FOR MULTITUBE
CONDENSERS
BISI 12627
SMID, V.
//HUTNIK//
00100/1974,VO024,NO006, PP 0213-0216
PRODUCING REINFORCING BARS BY HARDENING FROM THE
ROLLING TEMPERATURE
BISI 13189
SCHMIDT, H.
//HUTNIK//
00/00/1974,VO024,NO007, PP 0245-0250
REQUIREMENT FOR THE QUALITY OF BLAST FURNACE
COKE
BISI 13179 N
PETROS, J.
/ /HUTN I K / /
00/00/1974,VO024,NO007, PP 0258-0266
PROCESSING PIG IRON WITH VARYING PHOSPHORUS
CONTENTS IN THE TANDEM.FURNACE
BISI 1318q
97
000000006399
000000001972
000000010519
000000012293
000000012285
000000021411
000000026972
000000032127