SCIENTIFIC ABSTRACT VASYUTINSKAYA, L.I. - VASYUTINSKIY, S.V.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R001859020014-1
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
September 1, 2001
Sequence Number:
14
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
![]() | 3.54 MB |
Body:
VASYMNSKIY., N.A. (Zaporoslitye); VASYMNSKAYA, L.I. (Zaporozhlye)
Arsenic behavior during the oxidatizn rolli.,.g of Ker--h deposit iron ores.
I", AN SSSR. Otd. tekh. nauk. Mlet. i ger. delo no.1:26-32 Ja-F 163.
(MM 16:3)
Verch Peninsul& Iron ores) (Ore dressing)
(Arsenic)
VASYYT-- T !NS K I Y N A.; L.
ZhUl'. I. ki I", M .
L G",
GREDNEV, S.K.; VASYUTINSKIY, N.A.; VASYUTINSKAYA, L.I.
Nature of ferromagnetic oxidation products of siderites.
Zhur.prikl.khim, 34 no.8:1690-1695 Ag 161. (MIRA 14:8)
(Siderite) (Magnetite)
SAVITSKIY, I.V., VASYU;U644*A-~Y6~1C.-
~'-.~O~ I
Effect of aniline on certain indicstoro of protein mettLbolism
[with summary in Fmglish]. Vop.med.khim. 4 no-5:351-35-8 S-0 '58
(MIRA llill)
le Hauchno-isaledovatel'skayn annitarno-khimichesknya laboratoriya
Ministerstvo zdravookhrauenlya Ukrainskoy SSR, Odessao*
(BLOOD PRMIIIS, effect of drugs on,
aniline (Rua))
(ANILIITY. DYES. effects,
on blood proteins (Rus))
SAVITSKIT, I.V. [Savytalk7i, ~.V.J; VASTUTINSXILU, Te.M. [Vaniutynalka, IX.M.]
Studying certain aspects of protein metabolism during aniline
intoxication and tissue therapv. Yiziol.zhur. 6 no.1:101-107
Ja-F 160. (MMA 13:5)
1. Odessimya nauchno-issledovatel'skaya sanitarno-kbimicheskaya
laboratoriya.
(PROTEIN METABOLISM) (TISSUE XMIRACTS)
(ANILIMI--PHTSIOIDGI CAL XFFAGT)
L
3
'Jorlaava --
UOPtain
f -
a
r 0 r a n s
c; z" t S
Yox'(Iv
'
ya
O
an, 1963, P
POrOsa.,;
r.-G tl
3 171
e
,
c
t; a b o 1
1 8
d
-
o
p, ch-anp~a
s
l4ith transplant
t inve
t
p-
0-
ior
chijlin~~ accor s
iP-atad :n ra*-;tl
,
(
cond
Zc- e~.
,
~o'd
~urc
112 a'
1 ca
of
L 19786-65
ACCESSIO'..' 11R: AR4045761
metabolism were investigated. In Me first days followinr, 4-ranspi-ant-
ation, the 'Level of seruj-, pro-tol-r15 wa5 re,14.co4l Ii-ae ~o a-o -'r, and 'L -1 e
g I o b u 11 n k' g amur i r, ;7, L o b u I J1 v an ce i-, s 3 dA'~ !at-ar
globulin lave- lecreaso-~, 7 ar 7 7, a
a r a
o a 3.,-3
Card 212
yu 1-1 o
ExtimiktIon of smunjulittad meruric chloiWo and skiC
orld6 In valres, 11, 0. KnhAhlto, A. 1. ViLsytitinAkil, P, S.
'Vorobtva (ONte-mm Phami. Imt., Ministry of
-I
a
Mr
Ne
SSAC)
l
D
4
A
k
1
.
.
mc~
n
e
n
,
i,
,
p
,
~Afldn, rd NaCt fixei the lig lowl und perittIO the thration of
:Zn.
U S IR `13 wcig~~,:fl to n 2M.M(Lue. tli;k and buit on it bolling-
Writer 1xith, Add 2w) cc. N JljSO4 and 3 4 g. NaCl und
tominuo btating tintil the fa4 wil rul. fayvrn Immine trai~i-
Tilter the critileit
kri. lAyrf t1mmigh Cotton, tin*e
,
Ih, fatty laytir 2-3 thriti )~ fit W-fil cc, %iatt-r, and dil. tht
11(juR to 1110 or 2(10 ". Drt. Zn in W cc. t)y Wrating with
IZYc(CK),. Tirxatcatioth~r !~)m tvifhOJNlVaOll
'und the anit. of arid conrattried by ZnO and Hg.NlfjCl
(A). Cdcl the Hint. ul Ilig.N11,C) from the dit.
1, r-i,ee bcovern (A) aud tl7c rclitiv. anit. (it arld uscil by
d
c,. (ON lf~90, - OJILtj llg,.NII,Cl; I cc. OAH
O'WIWO Zria. A. S. Mukin.
VATMINUTY, A. 1.
Vasyutinskiy,, A. I. - "Study of the Influence of Substituents on Certain Analytical
Properties of Bensoic Acids and the Working Out on This Basta of Methods of
Quantitative Determination of Inorganic Preparations." Tartu State U Tartu, 1955
(Dissertation for the Degree of Candidate of Pharmaceutical Sclences.~
SOt Knizhnaya Letopial, No. 24, Moscow, Jun 55, pp 91-104
AUTHORS: Portnoy, A. I., Vasyutinskiy, A. 1. ___ 75-13-3-11/27
TITLE: The Use of 2-Sodium- Paraadnobenzoic Acid for the TitrimetriC
Determination of Cadniun (Primeneniye paraaminobanzoata natriya
dl.Ta titrinetricheskogo opredeleniya kadmiya)
PERIODICAL: Zhurnal analiticheskoy khimii, 1958, Vol 13, fir 3,
PP. 319 - 322 (USSR)
ABSTRACT: Many methods for the quantitative deterrination of cadmium
have been describad in publications (Refs 1-7). Conplexoretric
nethods for the determination of cadmium have recently Ero,7n
in inportance. When research was undertaken into the influence
of substitutes on the solubility of the salts of bnn-.oic acid,
it was found that cadnium salts form a hardly soluble co=pound
with 2-sodium-azinobenz.:~ic acid. This observation led to the
elaboration of a nsetho. for the quantitative deternination of
the cadmium. This method is based on the pre~-.ipitation of cad-
mium by solution of 2-codium-azinobenzoate and further brozato-
metric deterzination of the remaining para-aninobenzoic acid
in the precipitate. An inveotiFation of the compo3ition of the
Card 1/3 precipitate resulted in the following forzula:
The Use of 2-Sodiur.-Pa-,,,aa--iioberzoic Acid for the 75-13-3-11/27
Titrimetric Deterrination of Cad-zium
(H2Tic6H4COO),Cd-3112 0. Testa sh,iwed th~A the precipitation of
the cadmium bet-,ins with a molar relation of Cd: 2-sodiun-amino-
benzoate - 1 ; 1,3 and is complete at a ratio of 1:3,5- A
surplus of the rea,-ent has no influenctr oi, tae accuracy of
results obtained. It was further shown, that it is innater-Jal
for the accuracy of the deter:iination how lonC the ~recij;itate
is left to set. The procipitate has ivell set after 10 to '15
minntes and is easily filterable. Repeated washin- i7ith wnter
gives lower result3 and therefore the precipitate is wash-c-d
with 7ociof alcohol, which does not cause ar,,- decrease of rc,-
sults even after lo rashings. The precipitation of cad-nium
according to this method occurs within a pH ranoc of 2 to 6.5
quantitatively. The exactitude of deterrin"tion is of the same
order as that of tiia gravinetric determination of cadimium
according to the sulfate method. With the aid of the zethod le-
scribed the following salts of cadmiu-n can ' ',it(!r_Jned: the
acetate, the nitrate, the chloride and the 'LD~` '--. of cad:iiii-n.
Tests have shown that zinc is not precipitatc(I by a solution
Card 2/3 of 2-sodiu-n-aminobenzoate. Therefore cadmium can be determined
The Use of 2-Sodiur.-Faraazinobenzoic, Acid for the 75-13-3-11/27
Titrinetric Determination of Cadziuz
in the presence of zinc. It was ohown, that, even in the pre-
sence of a fivefold surplua of zinc satisfactory cadmiu-., de.-
ter.-iination can be carried out satisfactorily with this new
method. There are 8 tables and lo references, 5 of which are
Soviet.
ASSOCIATION- Parnatoeytiche-31.iy inatittit,
Odessa)
SUBMITTED: JulY 14, 1956
1. Cadmium-De ternunat ion
Odessa (Pharnac cut ic al Lnztitutc
j
Card 3,113
PORTNOY, A.I.; VASY-UTINSKIY, A.I.
Use of substituted phenylarsonic and benzoic acids in inorganic
analysis. Trudy kom. anal. khim. 11:192-197 160. (HIRA 13:10)
1. Odeaskiy farmatserticheakiy institut.
(Banzenearsonic acid) (Benzoic acid)
(Chemical testa and reagents)
VASYUTINSKIYJ A.I. (Vasiutyns Ikyi, A.I.); KHARIAMB, A.B., student
Refractometric analysis of anesthesine ointment. Farmatsev. zhur.
15 no.1:25-27 160. (MIRA 14:5)
1. Kafedra farmatsevticheskoy khimii Zaporozhskogo farmatsevtiche-
skogo instituta.
(BENZOGAINE) (REFRACTOMETRY)
VAO'WTI'TSKIY, A. T.; YEGOROW , S.P.
Use of a=onium o-n-itrobenzcate in analytical che~--strv.
Zhur. anal. khim. 19 no.6:66ri-663 164.
', (MIRA 18:3)
1. Odesskiy politekhnicheskiy institut.l..
SOV/126-7-6-9/24
AUTHORS: Amonenko, V.M., Vasyutinskiy, B.M., Lebedev, V.V. and
Shapoval, B. I.
TITLE: Vacuum Distillation of Metals with Condensrttion on a
floated Surface
PERIODICAL: Fizika metallov i inetallovedeniye, 1959, Vol 7, Nr 6,
pp 862-867 (USSR)
ABSTRACT: The properties of heat-resisting alloys are influenced
to a considerable extent by the purity of the starting
materials. Vacuum distillation is a promising way of
purifying such materials. The authors describe their
use for purifying iron of the method developed in 1952
at the Fiziko-tekhnicheskiy institut ANUaSSR (Physico-
technical Institute, Ac.Sc. Ukrainian SSR) for vacuum
distillation with condensation of the metal on a surface
at a high temperature. The authors consider this more
efficient than published methods and they have used it
successfully for purifying beryllium (Ref 5). The
distillation of the iron was effected in a working vessel
(Fig 1) with evacuation by an oil diffusion pump
(2500 litres/sec) and a type VN-2 backing pump.
Card 1/4 0,5-3 litre alundum. or beryllium-oxide crucibles wound
SOV/126-7-6-9/24
VaCuum Distillation of Metals with Condensation on it Heated
Surface
with molybdenum or tungsten heating coils, contained the
metal. The heated column directly over the crucible was
generally lined with thin iron shoot, on which
condensation occurred. The temperature of the column
surface was chosen such that iron condensed while the
impurities remained vaporized: the lower part up to 130GOC,
the upper to about 11000C. Assuming as a first
approximation that the condensing metal and impurities
form an ideal solid solution, the authors apply the
Knudsen-Langmuir equation to calculate rates of
evaporation. From a crucib;e at about 1580'C evaporation
of metal occurred at 1 g/cm- hr., 75-80'/0' of wnich was
recovered at a column temperature of 1-250-13000C.
Tables 1-3 show compositions before and after distillation
(single and double) of armco, electrolytic (single only)
and carbonyl irons, respectively. Purification from Mn,
Mg, Cu, S, P, N2 and 0 2 was good and somewhat less so
from aluminium. Considerable contamination from
C,rd 2/4 evaporation of crucible material was possible, but with
double distillation the impurities could be reduced to
SOV/126-7-6-9/24
I-ac
uum Distillation of Metals with Condensation on a Heated Surface
0.01%. The resistances of some long-needle single
crystals of iron in the condensate were compared at O*C
and at low temperatures in the laboratory of B.G.Lazarev,
acting member of the Ac.Sc. UkrSSR: the ratio values
agree fairly closely (Table 4) with those of Meysner (Ref 6)
for the purest iron and indicate that the needles were
99.996% Fe. The authors have also studied the purification
of high-carbon (7% C, 73% Mn) and medium-carbon
ferromanganese. The same apparatus was used, evaporation
temperatures being iloo-14oocc. Rates of evaporation
tended to fall through impoverishment of surface layers
with manganese and formation of a graphite layer. Lower
iron contents were obtained when baffles (Fig 2) were
fitted in the column. on the lower baffles, kept at about
1000*C, almost all iron condensed, the manganese condensing
mainly on the middle baffles (750-8000c). Table 6 shows
the composition of the condensate from the third and
fourth baffles. A carbon content of under 5 x 10 3% is
inferred. The purity of the manganese after a single
Card 3/4 distillation is over 99.96%.
SOV/126-7-6-9/24
Va.cuum Distillation,of Metals with Condensation on a Heated Surface
There are 2 figures, 6 tables and 6 references, 3 of 'Ilhic;
arc Soviet, I English and I French and I G01-FINAn.
ASSOCIATION: Fiziko-tekliniclieskiy institut AN UkrSSR (Physico-
Technical Institute, Ac.Sc. UkrSSR)
SUBMITTED: July 22, 1957
Card 4/4
KOGAN, V.S.; KARTMAZOV, G.N.; YAKIMENKO, L.F.,
diplomnitsa
Constitutional diagram of the nickel - chromium system. Fiz.
met. i metalloved. 9 no. 4:558-563 Ap 160. (MIRA 14:5)
1,. Fiziko-tekhnicheskiy institut AN USSR.
(Phase rule and eqalibrium)
(Nickel-chromium alloys--44otallography)
VASYUTINSKIY, B.M.; KOGAN, V.S.
Interaction between molybdemm and chronium in nick-e-l-Satumt-ac;
alpha, hard solutions. Fiz. met. i mets.Uoved. 9 no.4:564-568
Ap 11- (MIRA. 14: 5)
1, Fiziko-tekhnicheskiy institut AS USSR.
(Qhromium-i1?)lybdemxm steel-Metallography)
(Phase rule and equilibrium)
S/185/61/006/002/016/020
'Lit, D210/D.)04
P,UTI(ORS: Amonenko, V.?,T., and Vasytityn4l
TTTT,'P,. The existence of a permeability minimum in the flovi
of gases through porous films
11'~,'RIODICAL: Ukrayinslkyy fizychnyy zhurnal, v. 6, no. 2, 1961,
263 - 266
TEXT: '3eryl;ium films were obtained with the aid of precipit,,~,.tirn
oi Be vapor on a molybdenum surface at 1()-5 mm Hg. The
of the condensation --urf.-,ce was vari--d between 400 und '750L,(" in
different exntariments. Degassing of molybdenum befo-re condensation
affects essentially the character of distribution of the pores in
the film. The poriaeabiliL, is defined by tho auV,,urs as tho ratio
of flovi through a plate to the flov., throurh the sairie are-,~ in
ocnee of the plate. Experimental determination of por,i,,eability viris
made accordin U -
- g to the formula
Card 1/3
The exi-stence of a permeabi-lity ...
+
20
1)")10,11)504
p1 being the decrease of pressure throu.,,,,h the film at, t~ie be I
ning of the experiment, 2 the a' the end of. e -,'~ e -
riment, /'%t the time of var-'Lutio,-, of the decrease fror,. t r.
'21, p21 V 1 and V 2 the volumc-3 1).,.f 1,11,~ film.
were made on a device not e:i.,ientiully differ,!nt. froni MI.
~e f - 1; Ann. d. lli.ysik, 2,1-1,, 75, 190,j), ;~,lld 1~7r-,lr-lis of tl:e
dence of y on P were traced. Oily one io f-Lvell Oy Ille
thors (thicknesu (if the fillpi approx. 1.00 11). prola th"- rc~jat-ion
1, ' ,:o, i " r for the tUr-azisition interva). ( , - free path of "".42
Molecitles, r - radius of capillaries, J, riot defined) it IS
C4rd 213
2 rhJ , I
S/185/61/CO6/002/016/020
The existen~~e of a permeability D210/D304
ted that the mean radius of the capillaries is r--- 0.5 V. From the
existence of a minimum it is concluded that the pores are mostly
direct canals. The permeability of films which had a minimum was
always found to be small (10-4 - lo-5), There are 2 figures and
6 references: 1 Soviet-bloc and 5 non-Soviet-bloc. The references
to the English.-language publications read as follows: W, Pollard,
Phys. Rev., 69, 539 1946i W. Pollard, W. Present, Phys. Rev., 73,
7, 762, 1948; Kormann, Proc. Roy, Soc., 203, "", 1950.
ASSOCIATION: Fizyko-tekhnichryy ins".-ytut AN URSR, n, Kharkiv (In-
stitute of Techi~ical Physics, AS UkrSSR, Yha?kov)
SUBMITTED: July 8, 1960
Card 3/3
22966
2, f,,p,~ S/126/61/011/005/014/0-15
E193/E183
AUTHORS: Gindin, I.A., Starodubov, Ya.D., and Vasyutinskiy, B.M.
TITLE: Plasticity and brittleness of caat mclybdenum at
temperatures between 4.2 and 700 OK. I.
PERIODICALs Fizika metallov i metallovedeniye, Vol.11, NO-5, 1961,
PP. 794-8oo
TEXTs The object of the present investigation was to explore
the possibilities of low-temperature application of refractory
metals such As Mo, Cr, W, Nb, etc. To this end, the mechanical
properties of Mo were determined by means of the standard tensile
test at 4.2-700 OK2 and the effect of preliminary heat- and
mechanical treatment on the transition temperature from the ductile
to brittle fracture was studied. Mo of 99.95% purity was used in
the experiments, the main impurities consisting of Wa 0.005 Fei
0.01 Ni; 0.017 Ca,, 0.002 Al; 0.002 0; 0.0009 N; o.ooo6 H.
To ensure uniform grain size, the ingots cast in vacuum-are furna--e
were hot-rolled at 1000 OC to 50% reduction in thickness, spark-
machining having been used for the preparation of flat, tensile
test pieces of 7 mm gauge length and 2 mm2 cross-section.
Card 1/ 6
22966
S/126/61/011/005/014/Ojc
plasticity and brittleness of cast E193/E183
After machining the test pieces were vacuum-annealed at 1280 OC
This treatment reduced the gaseous impurity content and produced a
coarsely-crystalline structure with the average grain size of
200-400 1&. The tensile tests were carried out at 4.2, 20, 77, 2.83,
200, 223, 243, 3009 435 and 700 OKI at two rates of strain, 0.4 and
30 1L/Bec. Some of the results obtained at the rate of stratn of
0.4 ii/sec are reproduced in Fig-3, where the yield point. (a 8)~
U#T.S. (0b) and the true tensile strength (vu) measured in kg/mm2
are plotted against the test temperature (OX). It will be seen that
all these properties increase with decreasing temperature. The
point of intersection of the a. and Ob curves determined the
transition temverature from ductile to brittle fracture, which in
this case was 183 OK. The unusual feature of curves shown in Fig-3
is that they all pass through a maximum at approximately 8o OK,
aince it Is generally believed that the tensile strength in the
brittle fractural region does not depend on temperature. With
increasing rate of strain, both o. and Ob increased, and the
temperature of the transition from ductile to brittle fra:ture was
shifted to 208 OK. The plastic properties of Mo have been found to
decrease with decreasing temperature at a rate which increases wt.th
Card 2/ 6
22966
S/l26/6i/oil/oo3/oi4/o15
Plasticity and brittleness of cast .... E193/E183
increasing rate of strain. This is illustrated in Fig.5, where
elongation (6, %) and reduction of area (q., %) are plotted
against the test temperature (OK) for specimens extended at 0.4
(open circles and squares) and 30 p/sec (black circles and
triangles). In the second stageof the present investigation, the
tensile test pieces were subjected to the following treatment;
(1) loading at room temperature and at a rate of strain of 0.4 IL/sec
to attain a stress equal to 0-5 asi (2) slow cooling under
constant load to 77.2 OK and holding at that temperature for 1-1.5
hours. It was found that after this preliminary treatment, the test
pieces tested at 183 OK (i.e. at the critical temperature) exhibited
aome degree of ductility (6 5%). Fig.6 shows the actual load (kg)
versus strain (IL) curves for Mo tested at 183 OK at a rate of
train of 0.4 p/sec for untreated (curve 1) and treated (curve 2)
pecimens. In Fig-7 the elongation (6, %) of untreated(curve 1) and
:
treated (curve 2) test pieces is plotted against the test
temperature. It was found also that no significant improvement in
ductility can be achieved by cooling the metal (during the treatment
described above) to temperatures lower than 77 OK. An increase in
Card 3/6
22966
S/l26/6l/oll/oo5/ol4/oi5
Plasticity and brittleness of cast ... E193/Z183
the low-temperature ductility of iron, subjected to similar
treatmentl has been attributed (Ref.li Gindin, I.A., FMM, 1960, 9,
447) to the formation of twins with dislocation-free boundaries.
In the came of molybdenum, the present authors postulate, the
increased ductility attained by this treatment is associated mainly VK
with the stress-dependence of the temperature coefficient of linear
xpansion and with the changes in the mosaic structure of the metal
ubjected to stresses at low temperatures.
:
There are 8 figures and 8 referencest 6 Soviet and 2 non-Soviet.
The English language reference reads as followas
Ref.6s J.H. Bechtold, J. Metals, 1953, 5, 1469.
ASSOCIATION3 Fiziko-tekhnicheskiy institut AN USSR
(Physico-technical Institute, AS Ukr.SSR)
SUBMITTED: August 15, 196o
Card 4/6
V I I'l ) K , ILI, IS/126/61/012/001/015/020
6200 2t09, )209, 25923 E193/E48o
AUTHORS: Gindin, I.A., Staradubov, Ta.D., Vasyutinskiy, B.M.
TITLE: Metallographic investigation of molybdenum deformed in
tension at 4.2 to 700*K. II
PERIODICAL: Fizika metallov t metallovedeniye, 1961, Vol.12, No.1,
pp-132-139
TEXT: Many of the metali-Vith body-cent-red cubic lattice undergo
a ductile-to-brittle transition at sub-zero temperatures. It is to
be expected that as the temperature of this transition is approached
changes occur not only in the mechanical properties of the metal
but also in its microstructure. Since no study of molybdenum at
temperatures lower than 77*C had been reported, the investigation,
the results of which are described in the present paper, was
undertaken with the object of studying the microstructure of
molybdenum deformed in tension at' 4.2 to 7000K. Both optical and
electron microscopes were used in the examination of the specimens.
No etching was used, the changes in the microstructure on the
preliminarily polished specimen surface having been revealed with
the aid of a microinterferometer. Qualitative assessment was made
of the density of slip bands, degree of uniformity of deformation
Card 1/9
s/126/61/012/001/015/020
Metallographic lnyestij~Aln E193/E480
in different grains, mean magnitude of absolute displacement in
slip, and the dependence of these characteristics on the
temperature and degree of plastic deformation was evaluated. The
results can be summarized as follows. (1) At all temperatures at
which molybdenum remains plastic (that is down to 1830K) it deforms
plastically by the mechanism of slip. An in other body-centred
cubic metals, branched slip lines are formed on molybdenum,
indicating a more complex mechanism of deformation than that
obtaining in face-centred cubic metals. This shape of the slip
lines can be observed already in the early stages of plastic
deformation corresponding to an elongation of 6 = I- 2%~ The
effect becomes more pronounced with increasing degree of
deformation at any given temperature but the effect of heavy
deformation is most pronounced near the ductile-to-brittle
transition temperature. Fig.2 shows (magnified 330-fold) the
microstructure (a) and the interference pattern (b) of the slip
bands formed on molybdenum deformed at 200*K to 6 . o.8%; the
magnitude of the absolute slip was in this case approx 0.25 ),.
In suitably oriented grains (particularly at high temperatures) a
Card 2/ 9
25921 on ... S/126/61/012/001/015/020
Metallographic investigat E193/E480
system of interwecting slip lines Is formed. Increasing the
degree of deformation of molybdenum at 240 to 700*K brings about the
appearance of new slip bands and an increase in the displacement
along the slip planes. The development of the prozess of
deformation, however, Is manifested predominantly by growth of the
initially-formed slip bands. Thus, for example, just before the
fracture of a specimen (6 - 38%) at 700*K, the sltp bands may
become 6 to 7 ji wide. The density of the slip lines also changes
with temperature. At 700*X, it is relatively small and slip bands,
spaced at 12 to 15 ji, predominate. At 300*K, the density of slip
bands corresponding to the same degrees of deformation is higher,
the width of the slip bands and the spacing between them decreasing.
With a further decrease in temperature, the density of slip bands
again decreases approaching that obtaining at 7000K.
(2) In addition to deformation by slip (as revealed by the
formation of slip bands) plastic deformation of molybdenum at room
temperature entails a specific mode of deformation, localized at the
grain boundaries and in the grain-boundary regions, This
mechanism operates at relatively low strains 0 to 5%). With
increasing strain some of the regions of localized deformation grow
Card' 3/ 9
A S/126/61/012/001/015/020
Metallographic investikeVon E193/E480
in size and cracks are formed at the boundaries of these regions
after heavy deformation. The width of these n6ar-boundary regions
can reach 25 to 30 'sl, the relative displacement of adja.~.ent grains
along the grain-boundary being several tenths of a p, This mode
of plastic deformation which has been observed In pure iron at
sufficiently low temperatures (Ref.4; Gindin I.A. and
Starodubov Ya.D. FTT, 1959, It 1794) appears to be a property of
pure metals. The microstructure and interference pattern of the
grain-boundary and the grain-boundary region of molybdenum,
deformed at 300'K to 6 a 20%, is shown in Fig-5a and 5b respectively
(magnified 440-fold). (3) With de:;reasing temperature the
character of plastic deformation changes T-onsiderably. At
temperatures approaching the ductile-to-brittle transition,
fragmentation and block formation precede the appearance of slip
bands. The formation of blocks (whose size, determined with the
aid of an electron microscope, was found to be (2 -3) x 10- cm)
increases the resistance of molybdenum to slip and twinning; the
process of deformation becomes less uniform and fracture takes place
at relatively small strains. (4) In contrast to other metals with
Card 4/9
S/126/61/012/001/015/020
Metallographic investig,lMon ... E193/E480
body-centred cubic crystal structure, twinning plays a relatively
insignificant part in the plastic deformation of molybdenum. Thin
twine U to 2 U thick) appear in specimens deformed below 246*K
but only in isolated grains. An electron microphotograph
(magnified 11250 times) of a twin (approx 0.5 ~, thick) in
molybdenum deformed at 200*K to 6 x-2% is shown in Fig.8.
A: specific characteristic of twins of this type is the presence of
lightly and heavily distorted zones showing, respectively, as dark
and light bands on the microphotograph. It is postulated that the
highly distorted zone is formed suddenly when a certain stress,
required to initiate the process of twinning, iv reached. The
appearance of this zone is accompanied by the formation of a mosaic
structure in the boundary region and by the formation of block$ and
their elastic recovery. An in the case of iron, growth of a twin
in molybdenum takes place by movement of one of its boundaries;
on reaching the distorted region, the growth of the twin ceases
owing to the strain-hardening of this zone. (5) The specific
character of plastic deformation of molybdenum in reflected in the
manner in which this metal fra.-tures. At 300 and 700*K fracture
takes place along the slip planes and a well-defined nezk is formed
Card 5/9
25923 S/126/61/012/001/015/020
Metallographic investigeition E193/E480
In a tensile test piece. Cracks along the slip planes appear
also in molybdenum, tested at 240*K, but In this case they are
accompanied by cracks along the cleavage planes, the number of
these cracks increasing with decreasing temperature. This is
illustrated in Fig.9 (magnified 440-fold) showing a portion of a
test piece deformed at 2430K to 6 . 18% in which the parallel slip
lines end at a crack along the cleavage plane. On approaching the
ductile-to-brittle transition temperature, and particularly below
it, cracks along the grain- and block-boundaries are formed. Side
by side with the main crack a number of cracks parallel to it but
not traversing the entire cross-,section of the test piece can be
observed. Fracture below the critical temperature is both trans-
and Inter-crystalline, although the latter Is relatively less
pronounced. The decrease in strength of molybdenum below 27'K
has been attributed to the formation of a large number of surface
cracks which cause premature fracture. The formation of the
surface cracks is, in turn, associated with a high concentration of
oxygen in the surface layer. It was concluded from the results of
the present investigation that the character of plastic
deformation of 99-95% molybdenum in the temperature interval
Card-6/9
25923 S/126/6'1/0121001/015/020
Metallographic investigation Eiq3/E48o-
,studied changes considerably with decreasing temperature. In the'i
plastic range deformation trans-cry8talline slip predominates; at
room temperature this mode of deformation is accompanied by
localized deformation in the grain-boundary regions'. On
approaching the ductile-to-brittle transition temperature, block,
formation plays an increasingly important part and in mainly,
responsible for the absence of twinning at low temperature.
Ductile fracture at 240 to 7000K takes place along.the slip PlAnes."
At lower temperatures, cohesion of the metal is destroyed in the
early stages of the deformation and the main crack develops along,
the block boundaries. There are 10 figures and 9 references:
5 Soviet and 4 non-Soviet. The four references to English
language publications read as follows: Chen N.K., MAddin R.,
Trans. AUDIE, 1951,191, 4611 Andrade E.N., Chow J.S. Proc.Roy.
Soo. ;940, 175A, 290; Cahn R.W. J.Inst. Metals, 1954-55,
$3, 493; Rendall J.H., Johnstone'S.T.M., Carrington W.E.
J.Inst.Metals, 1953-54, 82, 345.
ASSOCIATION: Fiziko-tekhnicheskiy institut AN UkrSSR
(Physicotechnical Institute AS UkrSSR)
Card 7/9
S/126/61/012/005/023/028
E040/E435
AUTHORSg Vasyutinskiy B.M,, Kartmazov- G.N.. Finkel' V,A.
TITLE-, The structure of chromium in the temperature range of
700 - 1700-C
PERIODICAL~ Fizika metallov I metallovedeniye. v.,12 n0,5 1961,
771--773
TEXT,. Previous investigations of the crystalline structure of
Ni--Cr alloys in the temperature range of 1840 to 1930*C
indicated the presence of a cubic, fa~~e-centred 0--phase of
chromium and the possibility was suggested that chromium exists in
five allotropic modifica,~ions, To -erify these assumptions. a
study was made of the crystalline structure of 80 x 10 x 2 mm
chromium specimens with a purity of 99,,94%.. The examination was
mad-s- i~ a high-temperature X-ray camera, which was first evacuated
to 10' nun Hg and then filled in with argon to the pressure of
300 mm Hg. The specimen was heated by passing through it
electri-, current (up to 600 A), The examination was mad,2 in
Cr anticathode radiation at a specimen-film distance of 60 mm.
which ensured good resolution of the a-doublet and enabled an
accurate determination of the latti:e parameter. The experimental
Card 1/P_
S/126/61/012/005/023/028
The structure of ~_hromium E040/E435
set-up was designed to facilitate refle-.1.-ion from the (211) plane
of the body-centred chromium in the whole interval of the test
temperatures. The experimental results are shown in Fig.1 and 2.
The resulta shown in Fig.1 indicate the absence of any polymorphi:
transformations in pure chromium within the temperature range:
investigated, There are 2 figures and 14 references,.,
11 Soviet-bloc and 3 non-Soviet-blo_ The three references
to English language publications read as follows;.
Ref,.I,, Bloom D.S., Grant N,J. J, Metals., v,3 (11), 1951~ 1009.
Ref.24 Abrahamson E., Grant N..J. J. Metals, --,r,8.,. 1956-, 975.
Ref.31 St~Lin C., Grant N,J, J_ Metals, v,,7. 1953 127c
ASSOCIATION, FitLkr,-tekhn_,chesk_Ly institut AN UkrSSR
(Physicotechnizal Institute AS UkrSSR)
SUBMITTED. April 1.9, 1961
Card 21,42
7~
s/16o/62/OOU/0U1/G14/U14
E040/E133
AUTHORS; Azhazha, V.,M. , Vasyutinskiy, B. ~1. , and Shapoval, B. 1.
(Kharlkov)
TITLE: Mechanical properties of high purity nickel
FLRIUDICAL: Akademiya nauk SSSR. Izvestiya. otdoleniye
teklinicheskikh nauk. ~Iletallurgiya i toplivo.
no.1, 1962, 160-161
TLXT: Nickel of 99.981/4' purity (0.006~a Fe, O-C,03'i- Si,
0-001~- Al) was produced using a vacuum distillation column
described previously by V.1-1. Aronenko et al. (Ref.l: Fizika
metallov i mc-tallovedeniye, v.7, no.6, 1959, 369).
Spectrochemical analysis data showed that the nickel prepared
by vacuum distillation from alundum crucibles at 11160 OC had.-
the impurities of Bil 11b, S, Mfg, Sb, Cd and P not exceeding
3 x lo-30.Q. Mechanical strength tests were carried out on
specimens prepared from distilled nickel subjected subsequently
to re-welting under vacuum. The test castings were then cold-
worked to 40-50',") and annealed in order to produce a grain
diameter of 0.06-0.08 mm. Tensile strength specimens were
Card 1/3
P
Mechanical properties of high ... s/l8o/62/000/001/ol4/oI4
E040/E135
30 mm in length and 6 mm in diameter. The specimens were
annealed after polishing in order to remove the effects of cold-
working. It was found that in tensile tests at '20 OC high-
purity Ni behaves in the k3ame manner as pure polycrystalline Al,
i.e. after formation of one or several necks ftirther deformation
proceeds by slip. Impact strength was > 36 and ;;, 3 4 k'g n i / c i a 2-
at 20 and -196 1C, respectively, compared with 11J.9 kgm/cm2 for
commercial grade Ni. Specimens were not fractured but on those
tested at -196 OC clearly visible cracks were observed. The
room-temperature tensile strength was 34.0 kg/mm2; yield
strength 6.7 kg/mm2; elongation 6MV'; and Brinell hardness 56
to 58 kg/mm2. Because magnetic properties of ferromagnetic
materials depend on the presence of impurities, especially gases,
the ferromagnetic anomaly of ductility of high-purity nickel,
which contains only a negligible quantity of gases, was expected
to be indicated more clearly than in ordinary purity nickel.
There are 3 figures and 2 tables.
Card 2/3
Mechanical properties of high ... S/ldo/6 2/c)o(;/Gc) I/o 14/oI4
E040/E135
ASSOCIATION: Fiziko-tekhnicheskiy institut AN USSR
g. Kharlkov
(Physico-technical Institute AS Ukr.SSR, Kharlkov)
SUBMITTED: September 14, 196o
Card 3/3
S/18 62/007/006/010/014
D407X301
H~~ _Y_' _.. Kartmazov, 11. M. and Pinkel
AuTHORS: Vasy a~".Y _B
TITLE': X-ray investigations of the structure of tantalum up
to 27000C
P_--'RI0i)ICA.L: Ukrayinslkyy fizychnyy zhurnal, v. 7, no. 6, 1962,
0161-6062
T_EXT: In the present investigation, the temperature range is ex-
tended beyond 22000C. The specimens were made of tantalum wool,
0.3 mm thick. The metal was annealed in a vacuum at 22000C so as to
remove gaseous impurities. The X-ray analysis was carried out in-a,
hi,-'h-temperature X-ray chamber in a vacuum of 1-3.10-4 mm Hg. The
specimens were heated by an electric current. Only the tantalum
line was observed over the entire temperature range; the parame-
ters of the body-centered cubic lattice vary smoothly with tempera-
ture. This indicates the absence of phase transitions in tantalum.
--The temperature dependence of the lattiae parameters of tantalum
Card 112
X-ray investigations
can be expressed by
S/185/62/007/006/010/014
... D407/D301
the empirical formula
a -10-5T+0.8660-10 -8T2)kX.
TOC (3-3017 + 1.4142
The coefficient of linear expansion was calculated by an approxi-
mate formula. The temperature depbndence of the coefficient of ii-
near expansion Js shown 'n a fivuie. At temperatures above 20000C
L 1 0 ,
the lattice parameter varies almost linearly with temperature,
whereas the coefficient of linear expansion remains dractically un-
chan;,ed. There are 2 fi-rures. The tmost, important English-language
0 01 - -
reference reads as follows: J -
. d.iBdwards, R. Speiser, H. John-
son, J. Appl. Phys., 22, '424, 1951.
ASSOCIATION: Pizyko-tekhnichnyy instytut AN UkrRSR, Kharkiv (Physi-
cotechnical Institute of the AS UkrRSR, Kharkiv)
SUBM'ITTED: ~Pebruary 1, 1962
Card 2/2
s/i26/62/ol3/002/017/019
E039/EI35
AUTHORS: Yasyutinskiy, B.M., Kogan, V.S., Kartmazov, G.N.,
and Yakimenko, L.F.
TITIX-s The formation of textured layers of nitride on
chromium obtained by condonsation in vncuujn from
the vapour phase
PERIODICAL: Fizika metallov i metallovedeniye, V.13, no.2, 1962,
310-311
TEXT: it is shown that the skin formed on the surface of
chromium when heated in air or oxygen consists of two layevs-
an external layer of rhombie Cr20,3 and an internal layer of
hexagonal Cr2N. This was discovered by means of X-ray diffraction
measurements. The structure of the skin formed on chromium when
heated in air and in nitrogen up to 1300 OC was examined for two
different samples; one was chromium cast and rolled in vacuum,
and the other a sample of chromium obtained by condensation frow
the vapour phase. This condensation was carried out at a
pressure of lo-3 mm fig on to a molybdenum plate over a periud of
Card 1/2
The formation of textured layers ... s/126/62/013/002/017/UI9
EU39/E135
10-15 hours forming a layer 300-500 ), thick. This layer was then
annealed in air for 45o hours. The skin formed was studied by
means of X-ray diffraction using K.-Cr radiation to improve
definition. Maximum reflection from, the (110) plane wivi obtjined
with the sample placed at 560 to the incident beam, indicating
that the nitride is orientated with the (110) plane parallel to
the surface. In the case of chromium cast and rolled in a vacuum
at a temperature of 1100 OC no structure corresponding to the
nitride layer was discovered; similarly, chromium cast and
rolled in air and in nitrogen at a temperature of 900-120c, OC
showed no structure. It is observed that the structured lay,_,i-
of nitride on the chromium condensed from the vapour phase j_3
much more firmly bonded to the outer oxide layer than in th(, case
of the structureless nitride on cast chromium from which the
oxide layer is easily separated.
ASSUCIATION: Fizilco-tekhnicheskiy institut AN UkrSSR
(Physicotechnical Institute, AS UkrSSR)
SUBMITTED; May 22, ig6i
Card 2/2
VASYUTINSKIY,_B.M.; KOGAN, V.S.; KARTMAZOV, C.N.; YAKIMENrO, L.F.
Formation of textured nitride layers on chromium obtained by
condensation in vacuum from the vapor phase. Fis. met. i
metalloved, 13 nn.2010-311 F 162. (KRA 15:3)
1. Fisiko-tekhnichaskiy institut AN USSR.
(Vapor plating) (Chromium-Metallography)
A
VASYUTINSKIY, B.M.; KARTMAZOV, G.N.; FINKEL', V.A.
Obtaining filiform cr7stals of chromium. Fiz.aet.i metalloved.
14 no.5:792-793 N 162. (KRA 15s12)
1. Fiziko-tekhnicheskiy inL3tltut AN IrkrSSR.
(Chromium) (Cx7staMzation)
VASYUTIVSKIY, B.H.; KARnUWV,, G.N.
Mechanism of nickel oxidation. Yisset.i metallared. 15 no-1:
132-134 Ja 163. (MIRA 1612)
1. Piziko-teklmicheskiy institut AN UkrSSR.
(Nickel) (Oxidation)
kMNENKO, V.M.# VASYUMPM,-D.M~q URTMAZOV, G.N.; SMIRNOV, YU.N.;
FINULJ J, V.A,
Investigating the structure of tantalum at high temperatures.
Fis,met,i metalloved. 15 no.3t444-450 Mr 163. (MIRA l6sk)
1. Fixiko-tekhnicheskiy institut AN UkrSSR.
(Tantalum-Testing) (Metals at high temperatures)
L 177Cn-6-5 T-7-ri (vi)/F4P(w)/7dA (d) /94PW/W(b) 1JP(c)/ASD(M0-1 Jr'/JG
ACCESSION tIR: AP4042048 S/0126/64/017/OC'6/0892/0897
AUTHORt V&syutLnskf-y4 B, Mp,; KartmazovL__G! I.; P I.,
TITLEt Surface structure and properties of acicular crystals of
chro Lun-
~Vll
SOURCEt FLzLka metallov i matallovedeniye, v. 17, no. 6, 1964, 892-
897
TOPIC TAGSt acicular crystal, whisker iurface structure, chromium
strong t growth mechanism, chromium
_;JLI
A
ABSTRAM Pointing out that the formation and growth of acicular
crystals-is far more complex than indicated by earlLe.r investigators,
the authors discuss surface structure, strength charteterLatics, and
growth mechanism of Cr crystals with a maximum cross section of
20 x 10-6 m=2 produced by vacuum condensation. Examination under a
standard optical microscope showed that crystals grov in steps; the
mean height of individual steps varied from 1700 to 2300 it. The
growth begins at the basal face and proceeds toward the apex. Under
Card 1/3
L 17700-65
ACCESSION NR3 AP4042048
an electron microscope stepped and complex irofiles as well as smooth
surface regions were also identified. Failure in tensile testqoccurred
bv a cleavage and was not preceded by conspicuous plastic defornation.
Investigations showed that the thicker crystals had a lower strength.
The strength reached 590 kg/mm2 in crystals with mscroscoiic growth
steps. Since appreciable strength was obEerved in cr,,rstal; both vith
a smooth surface and with growth steps, the autLors ausune that the
latter are not formed as a result of dislocation. The discontinuation
of axial growth is attributed to the mechanism of th,- development of
steps on the lateral face. Apparently, with each new layer that forms
at the basal face and reaches tl~z apex, the supply of crystallizing
substance to the mobile-w-hiske tend is reduced by the diffusion of
particles toward the step of the next layer. This was cor-zoborated by
the fact that thin crystals possess a smaller number of Rrowth steps
than thick specimens forned under analogous conditions. Moreover,
the same crystal may be rather smooth near the apex and rouzh in the
thicker portion. The chan6as in the axial growth under cor. it'lons of
temperature control were caused by the changes in the growth mechanism.
The contribution of A. A. Chernov Is gratefully ackno-vIedized. Orig.
art. hass 4 figures, 2 formulas, and I table.
Card 2/3
L 17700-65
-1
ACCESSION HRt AP4042048 II
ASSOCIATIONt Firiko-tekhaLcheskiy lnetltut ANUkrSSR (Physicatechnical
Institute4 AN--Yi_rujo
SUSHITTEDs 03Jul63 ENCL% 00 SVB CODE 0. Ss, Ic
NO RLF SOV: 005 OTHER: 010
Card 3/3
A
!7. fj 7 /0 0 194,4 19S 1,
A r (71, S N' NP AP 0 i i
F yj 1,j vasytitinskiv B M.
A 1,71. i f) F V.
r a
TITLE: Using secondar~~ ion-lonic i on fnr tudy! n, th I -taract inn of oxygen
,with the surface of niobiLa.,-
SOURCE: Fizika tverdogo te-- 7, no. 7, 1965, 1944-1951
TOPIC TAGS: ion emission, niobium, oxidatim
!ABSTRACT: Tha method f se,condary ion-ionic emission was used to investigate the I
Ah f " .;urface of -ien
Composition of oxides Ch foiin On lftr~ niobium w1 it interacts with
oxygen. It was estallished that in t~_, fr~_-m *cD 12T)"r tt-.on,
'lowin- oxides form on the !:urfaCe Of r1--)11iUrT1 WhlCh I'S iD an oxygen emosphere at a
NbO. 11bG2. Nb203. and Nb205- In the
10 4 =
pressure of approximately 1! Of ME
lemperatui,e interval. from, 1200 to 20000C the sqirface of Nb contains only Nbri and
Nb203. The ~, I ~ , f N' 1~ I .-, s ~ , I : C T-"-
,)ry-sion avi 4 ~ 1. . ;%~ r-
_f7 Z
-hr- 2f7 AIr"' ffimper-a-r, -Inve VT.-
t i on N'b~)2 !1b0+ wit h the ~e s or7.~ r x-; e in, a q a 5: e ;,-i sphas- . T. r, C
Gurd 1/2
L 58872-65
[ACCESSIOA NR: AP5017281
ision, we are sincerely grateful to A. K. Vallt---r for his constant intereat It, the
work." Drig. art. hdS: 4 figure-S.
ASSOCIATION: Khar'kavokiy gosudamtvenny-y univer-sitet im. A. M. Gor'):ogo (Kharkov
'State University)
IUBMITTED, 711 u P
1-Card 2/2-
UV I!,
C
AGG TIR: AT5027942 SCURCE CODE1 WOC001651000100010MI0082
AUTHORs Ivanov V Is.; Ifech1poranko, Yeq P, (Dr. of Toohnical ScLences); k~pov,.
A. D.j Vasyutin;ki;, D. 9-.1 Kartmazov, 0. R-.
ORGs none 6:
TITLTs Thermal stresses in chromium coatinA5,~on molybdenum- -
7-
SOURCE: Seminar Po sharostoykim Mkrytiyam. Leningrad, 1964. DWoatoykiye
-P-Okryti)-a -resiatint coatingsh trudy seminara. Lenin -~io Nauka ,
grad, 12d
1965, 77-82
TOPIC TAGS: chromium plating, vapor plating, molybdenum,, heat effect,, internal
etress, adhosiony thermal stress
ABSTRAGIs Previoua studios (FT'IM, IXp 4, 518P 1960) showed that coatings obtained
,ral bn the surface of Ho stunples had
by tbo con6enBablon In vacuum of Cr-yN).n ffood
protectIve propertios, but that their aervion life docreased consilerably when
thoy wero subjected to temp-Drature fluotuations. A study was mado on tho affect
of trwi-.3raturl ()n Intmial strespea In cbromiiwi coatings on miolybdenlara ",olucerl
[Card
113
L 284,08-66
ACC NRI AT5027942
in various vacuum con-Ittione and havin.e, various strengths or adheston of the
coating to tho substrate. The value of stress ( 6,) uas determined from changes
in the doglootion (d) of the plated samples (100 x 5 x 2rm)) by using the formula
6 = 4 E h~ d/ 312h, (b1+ h2), where E is tho Young modulus, I. is the length of the.'
coated part of the sample, and h and h2 are the thickness-as of the coating and
the bass metal, respectively. Re curves of deflection (in m) ve temperature
'were plotted during the experiments. The changes in the slope of the curves
(inflections), corresponding to the conversion of elastic into nonelastic
deformations, were observed during he%ting and cooling of the samples. Nonelastic
deformations in the low-temperature range 400C) were formed at the critical
stress d-=8 kg / _L=2e The value of the critical stress could be controlled
either by the deformation of the coating itself or by t~e strength of adhesion
of the coating to the substrate. Experiments with the coatings of various degrees
of adhooion strength (strength of adhesion was changed by applying the coatings
to the surface of Mo oxidized to various degrece) or by increasing the roughness
of the Mo surface) proved that the value of the critical 3trens dAd not depend
on the adhesion strength and was controlled by the d9formation of the coating
itself. The adhesion strength of coatings applied to the surfaces of oxidized
Card 213
L 284,,)8-66
AGG JIRs AT5027942
and rionoxidized Mo were about the saw and wore similar to -the strength of the
coating. Me curves plott:ed for the temperature range of 1(20 1000C for the
coatings applied under varl us valuea of vacuum (10-; 10-5 mm H9) showed that
the samples produced in 1013 vacum-failed at smaller than the :samplea Coated
lin the higber vacuum. Orig. art. haBs 4 fig*
SUB CODEt 20/ SUBM DATEt 20Ju165/ CRIG REFt 003
Card 313
A:A
g~ 2 Or 50
X Mlr
N
i2581-Q, EPR/EPF(c)/ZffP(q)/EWT(m)/EY?P(B)/BDS AFPTC/ASD Pr-4/
.Ps-4 VP;VJDAVVJG1K1MM(a)
ACCESSION.NR: AP3007610 9/0286163/000/010/0072/.0.0172---
La~srev, B. G.;
AUTHOR:
._-Lazard
TITLE': Tinplating graphite. Class 48, No. 154752**
SOURCEt.,Byule izobret.'i tovarny*kh znakovs no..10, 1963, 72
TOPIC TAGSt graphite tinning, graphite' tinplatin&, va*cuum tinning,
vacuum tinplating, carbide forming additives, tin coat
ABSTRACT: A patent has been issued r a method of tinninS graph-'
ite parts by immersing them in molteA tin, To obtain a high-
quality tin coat, the tinning process is carried oup in vacuum at*
en molyb en'in,
1000C with a maximum 'of 0.01% tunRst u 4 titanium2- 7
-zi-resnium -forming metal.9 added to the tin bath.
or other carbide,
ASSOCIATI~ -~7
I Nt none
SUBMITTEDt 21Jun62 DATE ACQt 14oct63 ENCLt 00
I.I.CODE: ML NO REF SOVI 000 OTHER: 000
__JSUB L,. ., V-vw-
L ~_jjp(c) U,
f-C NRt __ , j Dlj,,,
Y,, A 023705 SOIRICE ICODEt UR/0126/C6/0-,~1/004/0620/0621.
AUTHORS I -Vann!tip-jislZL.2,,~,LY,.artr,-ozov G. 11.1 Smirnov, Yu, 11,1 V, A@
ORGt PhX~1co-Tocbn1cnl Institute, AN UlcrSSR (F'ziko-tekhnicheskiy inotitull- 101 Ula-WR)
TITLE: Invostigatl~-)n of the crystalline structur~(,-of niobium and,vanadium at high
temperatures lb -1,7
SOURCEt Fizika mot4llov i metallovodeniye, v. 21) no. 4, 1966, 620-621
TOPIC TAGS: niobium) 4anadium, x ray spectroscopy, crystal lattice param~jtor
ABSTRACTt The cryrGal atructura of nioblum and vanadium was doterrainod ati it Au-ctlon
of the tomperature. The experimental procedure wan deacribad oarlior IT'r V. 14.
Amonenko, Be Me Va3vutinakiy G. 11. Kartmazov, Yu. 11. Smirnov, and V. A. Filikol,
(F14M0 1963, 15, 1,445. The e~porimental results are presented graphicaUy (ooo Fig. 1~
It was found that the temperature dependence of the lattice paramators obeyed tba
following relationship
0-
3,3001(1 +7,223- 10-0 r .1, 7,&G7 I O~- 10 - Tj
A,
V . 'I ..I
+ 7.314 - I or-O -'T + 2,944 - 10-10 - T2LA--
V
UDGs 548.0.-546.881/882
L 301 4-67
RA14
ACC NRi AP6023705
Fig. 1, Temperature dependence of the lattice O.A
4%40~ dogree
paramotor nnd coefficient of linear ?'J60
0
~5 .. I, -'7- .. .
expansion of niobium oryotal lattice .
8
0
1
V00 /?0
vau $00: 12(v ~'14'0-9- E" "C
Orig, art, hast 2 graphs and 2 equations.
/
ORIG REF:
SUB COUEt
SUBM DATE: MAug65/ 001/ ON my oo4
Card
ACC NR; AT7004209 SOURCE CODE; iA_/66o6/6_6/Cd~/_00~
AUTHORSi Kogan, V. S.; Vasyutinskiy, B. 14.; Lazarev, B. 0.
ORG: none
~
.TITLE: Studying phase diagrams with the use of diffusion layers,
SOURCE: AN SSSR. Institut motallurgii. Eksperimentaltnaya tekhnika i metody
vysokotemperaturnykh izmereniy (Experimental techniques and methods of high temper-
ature measurement). Moscow, Izd-vo Nauka, 1966,, 121-127
TOP1G TAGS: metal phase system, metal vapor deposition, metallographic examination,
nickel, chromium, molybdenum, niobium, tin, iron, tantalum
ABSTRACT: The obtaining of metal phase diagrams by a multilayer techniquo is
described. The technique, an extension of the work of L. S. Falatnik, V. H. Kosevicli,i
and L. V. Tyrina (ROt. 1961, 21, 229), consists of condensing an appropriate metallic
vapor mixture and of subsequently preparing a thin polished section from the
Icondensate, This technique was applied to the study of the phase diagrarris of the
following systems: Gr-Nij Nb-Sn, Fo-Ta, and Mo-Cr-Ni. The experimental results,
shown graphically (see Fig. I)., were published earlier in three comrauiications by
B. M. Vasyutinskiy and V, S. Kogan (FMM, 1960., 9, 564). In addition, x-ray powder
pictures were taken and. the microhardness of the specimens was determined. The
results are shown graphically. It is concluded that the condermation-