SCIENTIFIC ABSTRACT VASIN, A.V. - VASIN, N.YA.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R001859010017-9
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: September 1, 2001
• Sequence Number: 17
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

VASINS A.V., kcand. veter. nauk
Experimental analysis of the mechanisms of allergical
reactivity in tuberculosis. Sbor. nauch. rab. Sar.
NIVS 6:3-46 163. (MIRA 18:11.)

VASIN, A.V., kand. veter. nauk; Y."VITKIN, Yu.P., kand. biolog. na,ik
Lnmwiogenic properties of the protein fractionu of
antianthrax serum. Sbor. nauch. rab. Sar. NIVS
6:70-72 163. (MlqA 18:11)

mm, A.V., kmW, voter. rmU-,; rMMIN, Yu*Po, )-4nd* blolneo z=ik
rapid nothods for datocting alkulcddu in biological
matorials. sbor. much. rab. srr. ums 6:295-194 163.
mochanim of the stimUtIng action of antibiotice m
the weight gain in poultry& Md.2195-206
Dimone In cattla duo to an excescivo eating of cc=*
Md. s207-212
&Llldium folLatm poisming of oattle* IW.t2l3QI5
(KRA 18 111)

w.-, !:, -T). ',i., tr.
-" -, I i
U. Perevod s al-li J "') - ' - V" ~ "") Pod red. 1. S. '-Opov,,~ .
Dairy herd breedin L -- I I
1,11osl,va, Gos. jzd-vo 1224. 265 P.

VASIN.B.N.
New species of the grey vole (Ificrotus eachalinenis sp.n.) from
Sakhalin. Zoolzhur. 34 no.2027-431 Pfr-Ap 155. (HLRA q:6)
1. Bakhalinsk'q filial Akademii SSSR.
(Sakhalin--Field mice)

VASIN, B.N.; IaPIN. T.K.; XYROM011, V.P.
--IBaBic problems of MidurIn gecetice" by
by B.U.Vasin. T.K.Lepin, Yi.Xfrolmoon.
95-105 Jl-Ag '56.
(GMUTICS) (YXIGIIISON, N.I.)
B.I.Yeiginsan. Reviewed
Biul.MOIP.Otd.biol. 61 no.4:
(MLRA 10:8)

VASIN, B.Ji.--
Nov date an the northern fur seal and sea otter. Biul.901?. Otd.
biol. 61 no.6:122 H-D 156. (MIRA 10:8)
(PACTYIG OCIAN-M-BBARING ANIMALS)

VASET, B. N.,
"Fur Seals and Sea Otters in Waters of the Okhotsk Sea and the Pacific Ocean,
oceanographic Research of the Northwestern Part of the Pacific Ocean Moscow,
Izd-vo AN USSE, 19~8. (The articles d1scusses ccnditions of aid the mig-,
tion of seals (Callorhinys ursinus,'i r-nd otters ~~Enhydra lutrisl in the Soviet
Pacific).
COVERAGE: This collection of articles reports are the results of observations made in
the Pacific by the Institute of Oceanology of the Academy of Sciences, USSR. Tn
1949, the Institute launched a systematic five-year program of scientific explora-
tion of certain hydrographic peculiarities of the Soviet Pacific area. The opera-
tions were carried out as EL "Complex CLeeanographic Expedition," using the motorboat
Vityazl as its base. The Expedition worked in collaboration with the Hydrographic
Institute of the Soviet Navy (VMS), the Pacific Institute of Piscatology and Oceanog-
raphy and some 40 other institutes of the Academy of Sciences. Between 1949 and 1954J.
18 trips were made, covering about 130,000 miles. Among the subjects of direct con-
cern were: meteorology, hydrology, oceanography, hydrochemistry, sedimentation, geog-
raphy of the littoral, geology and contours of the sea bottom, fauna plankton,
microbiology, and gravimetry. Twenty-eight authors contributed to the collection
which consists of 27 articles.

VASIN, B.N.
____~ur goal and sea otter in the waters of the Okhotsk Sea
and Pacific Ocean. Trudy Okeen. kom..3:129-129 '51. (MIRA 11:8)
(Par ]bat-Seals(Animals))
(Var Foot--Sea otter)

19
38B SO V/1 2 - 191 -11L
AUTHOR- Vasin,
TITLE: The ZavaritskiyCaldera on the Simushir Island
PERIODICAL: Izvestiya VGO, 1959, Vol 91, 17r 3, pp 268-271 (USSR)
ABSTRACT: The author spent 3 days in the area of Llic Zavaritrkiy
caldera on the Simushir island (11.646 to 11-71ON -
15142 to 15217E). He studied the area from the
standpoints of r-cology, zoology and b:-.tar-y. The dia-
meter of tho Zavaritskiycald-ora- is about- 7 im. The
peaks of the mountains surroundin;- it are 500 to
600 m. Another cr-,,ter havinG irreGular form, about
3 ka long and 2 'Im widej is located almost exactly
in the middle of the huge caldera. 7-his second
crater also has a lalke in U, called 311--yuzovo-ye
it
V
ozero, covering about 5 IM $ ch-oractuerized by a clear
cmerald-turquoisc color caused by sul-,-,hur. The depth
of the lake is about 47 m. Tho.rc a,_~e hot spots near
Card 112 the South edCo of the lal-ze. A t*,--4L--'d cratuel-, 100 m in

The ZavaritskiyCal,~era on the
diameter, is situated in the Eaot pa-r-L ~-;f tllc Biryu-
zovoye lake, in a peninsula. There io conr-,, -bout
10 m high, in the middle of the
in the interior of the tl~ird c-IL-.1tor.A u Z."0 cr
300 m to the North of th,,jLL p.,-.~nI.n.-;ula i.. arriol~hc.-r
island, about th.--- swnc size, sarroundod by about a
10 m wide moat. This islan-I did not aDpear on the
maps. The author finishes by stating that the huge
Zavaritskiyealdera is an active volcano. There qre
2 photos.
Card 212

VASJ~', F.T.Prillirl..al uchastiye ANDREYLV, F.I.; CILMNIUSHEUCII, V.A.,
lh'tb., retsenzent
of the avcot~n~.ii.il,cfilc,.il,,itiori, ana
of tho con't, of CII.Aing" Oo(AwniiO.-td w.-hotti, ktillkiill,~ov#Lnlia
i vnaliva otlivuk. Mio--k-,m, lzd-v,., III-Itiohim-
Ovlli~', 17: 7)
1904. 90 F~.

VASI-11:, G.
. I
.':achineo are count-,n-f. ~raz;.d. a-,,. 21 nr,.9;27 3 1 .17:10)
1. Vadwheldy inzli. O"(101a VAU

VASIN, If.
I ,
Machine milking. Nsuka i pered. op. v sellkhoz. 8 no.9:
28-29 S 158. (NIRA 11:10)
1. Direktor pavillona "Mokhanizatsiya v zhivotnovodetvn."
Vassoyuznaya sellskoKbozyaystvannaya vystavka.
(M411-ing rmchines)

VASIN, G.D.;NECHAYKVA, Ye.G.,redaktor; GALLOD, A.I., tekhnicheskiy redaktor
%.sI'-_*jf4,
[Stockraising farms; a guidebook) Zhivotnovodcheskie fermy;
putevoditell. Moskva, Gos. izd-vo selkhoz. lit-ry, 1956. 31 p.
(MIRA 9:8)
1. Moscow. Veespyuznaya seltakokhozyaystvennaya v-.votavka, 1954-
2. Direktor razdela kolkhoznykh zhivotnofodcneskikh farm (for
Vasin)
(Moscow--Agricultural exhibitions)

ALIXSXTIV. N.A.; ASIANOV. A.N.-, VASIN, G.D.; VOROHINA, Te.P., GRIGORXNKO,
G.P.-, GRUSHIN. F.Ye.; D116FOU'. DRESVYAMIIKOVA. D.F.; DUBrurRA,
K.Y.; KITAYIV, I.Te.; XULIKOV, N.Y.;' MAMUKOV. M.P.; XELINIKOV, A.I.;
RXZHOV. 1.P.; PESTRYAKOV. A.1., rodnktor: PAVLOVA, X.M., tekhnichs-
skiy redaktor, SOKOLOVA. N.H.. taklinicheakly redaktor
[Machanisatioa and electrification at the All-Union Agricultural
Xxhibitioa; 1956 guidebook] Makhaaizatelia i alektrifikatelia
na Vaesoiuznoi sellskokhozisistvennoi vystavke; putevoditell, 1956.
Moa)cva, Goo. izd-vo sellkboz. lit-ry. 1956. 305 P. (HLRA 10:3)
(Moscow--Agricultural machinery--Ixhibitions)

VASIN, G.G., insh.
---.- -Wkck^Wh*
Kinsmatics and trn"Ics of a pulsator nechazism for inertia
stagelans torque converters of tractars. Sbor.st.CHPI n0-13:
57-67 159. (MRh 15:4)
Tractors--Transmission devices)

25(2);10(4) PHASE I BOOK EXPLOITATION SOV/3301
Chelyabinsk. Politekbnicbeskiy institut
Raschet i konstruirovaniye mashin (Design and Construction of
Machines) Mbscow, Mash$iz, 1959. 78 P. (Series: Its:
Sbornik statey, vyp. 13). 4,000 copies printed.
Sponsoring Agency: Ministerstvo vyssbego obrazovianiya,S.SSR.
Reviewers: S.A. Bybin, Engineer; G.A. Mendeleyev, Engineer;
G.E. Paley, Candidate of Technical Sciences; A.P. Trofimov,
Engineer; Ye.M. Kharitonchik, Candidate of T.chnical Sciences;
and Kh.l. Shvartsman, Engineer; Ed.: V.I. Sayapin, Candidate
of Technical Sciences; Tech. Ed.: N.A. Dugina; Exec. Ed.
(Ural-Sibirian Division, Mashgiz): T.M. Somova, Engineer.
PURPOSE: This book is intended for technical and scientific per-
sonnellin the field of the,design and construction of machines.
COVERAGE: This is a collection of articles written by scientific
perbonnel of the Chelyabinsk Polytechnical In6titut6. They
Card IA

Design and Construction (Cont.)
deal with various problems
assemblies and mechanisms
automotive transmissions,,hydraulle
sonafities are mentioned'.
TABLE OF CONTENTS:
Foreword
3
Rumyantse.v, S.A., Engineer. Problem of Increasing the 11fe of
Splines 4
Investigations aimed at'improv'ing theyear resistance of splines
with length/diameter ratioof 0.5 are described. It Is,shown''
that by deanQ of nitriding and 'cyaniding and iher6asing the-
life of splines by 2.6-3 times, their wear amounts to only-
0.04-0-05 mm and they are suitable ~or further use'.
StashkevAch, A.P.-, Candidate of Technical Sciences. Problem of
Designing Cams for the Mechanism for Valve Operation of Internal
Combustion Engines 12
SOV/3301
in the design and construction of sub-
of internal combustion engines,
and other machines. No per-
References accompany each article.
Card 2/ 4

Design and Construction (Cont.) SOV/3301
Analysis o*f the effect of geometry of separate sectiorw of carn
profiles on the kinematics of the follower. Intake and exhaust
cams with improved profiles were designed.
Pogrebennyy, I.N., Candidate of Technical Sciences. Improving the
L-18 Centrifugal Pump 26
Replacing the L-18 centrifugal-pump impeller by a new one, type
B-5, resulted in an increase of efficiency of 26 percent and
an annuAl saving of 30 thousand rubles.
Temnov, V.K., Candidate of Technical Sciences. Friction Factor
in Unstead3f Fluid Flow 45
An expressipn for the friction factor in unsteady flow in a
pipe is derived.
Pogrebennyy, I.N., Candidate of Technical Sciences. Cavitation
Tests on a Model of a Francis-type Turbine in an Open System 48
Various methods of cavitation tests on a model of a Francis-
type turbine with variable head were compared. It was estab-
lished that it is most expedient to determine cavitation
Card 3/4

Design and Construction (Cont.)
SOV/3301
characteristics with a constant opening of the guide,apparatus
and a constant number of revolutions per minute. Under these
conditions cavitation develops at a lower head than when other
methods are used.
Vasin, G.G., Engtneer. Some Problems of Kinematics and Dynamics
-6f-th*-*IYpulsator" in an Automotive Inertia-type Stepless Torque
Converter 57
The author presents kinematic and dynamic analysis of t~:e
"impulsator" mechanism of the new automotive inertia-type
stepless torque-converter developed at the Chelyabinsk Poly-
technical Institute under the direction of M.F. Balzhi.
Vasin, G.G., Engineer. Principles of Designing the "Impulsator"
Mechanism of an Automotive Inertia-type Stepless Torque ionverter 68
The author describes basic conditions which determine the selec-
tion of a method for designing the impulsator and determines
basic relationships between impulsator parameters.
AVAILABLE: Library of Congress 'Vx/j 0
4-29-6o
Card.4/4

VASIN, G.G.. inzh.
. - 1. -- ---~"
Designing a pulsator mechanism for inertia stageless torque
converters for tractors. Sbor.st.GRPI no.13:66-79 159.
(WRL 13: 10
(Tractnra-Transmisnion devices)

3/1 451601C.I.Q/~1,651CC2/C
A16l/AO26
Senior Teacher
AUTHOR: '.ja!~i
TITLE: Selecting the Impulse Mechanism Parameters for Inertia Type Cont~in-
uously Variable Torque Converters
PERIODICAL: Izvestiya vyssi-,Ikh uchebnykh zavedeniy. - Mashinostroyeniye, 1960,
Ito. 6, pp. 25 - 34
TEXT: Many institutes, research organizations and industrial works are
trying to solve the problem of automatic continuously variable transmission, eithr
hydraulic, electrical, or mechanical. A mechanical one has been developed at the
Chelyabinskiy politekhnicheskly institut (Chelyabinsk Polytechnical Tnstit-ute)
under the guidance of M.F. Balzhi, and was described in (Pef. 1). 'fhe first
torque.converter is under test in a C-100 (S-100) tractor at Chelyabinskiy trak-
tornyy zavod (Chelyabinsk Tractor Works). The design principle (Fig- 1) is brltf-
ly described. It includes te.,o flywheels on the input and output shaft, two ec-
centrics, two "avtologs" ( 11autologs"), two idle-run clutches ard a brake. The
impeller assembly group consists of one fly;.;heel* (1), two rods (2) -and -,..-eights (3~
The impeller is one of the most important elements in the system, and the purpose
of the article is to explain. in full detail ho- to ' t t near
Card 1/ 2

s/145/6o/ooo/6rj6/oc2/C07
A16l/AO26
Selecting the Impulse Mechanism Paraine'u-,r,; for Inertia Type Continuously
Torque Converters
dynamic and kinematic parametem. It in mt-4Ationcd that the impQll(.-r reiembl(-S to
a certain degree that of the 8pontan -type transinission. There are 9 figur(!s 3-1,1
3 Soviet references.
ASSOCIATION: Chelyabinskiy politekhnictieskiy institut (Chelyabinsk Polytechnical
Institute)
SUBMITTED: September 14, 1959
82
Figure 1*
Diagram showing principle of
converter.
Card 2/2
cxcita

VASINj G.G.p starshiy propodavatell
Dcparimental investigation of the mf-;tion of sh-afts of an inertia
torpe converter. Izv*vjs.uchcbozav.; ruishinoutr. no.2:74-80 161.
(,'.EIF,A 14 -.3)
1. Chelyab:Lnskiy politeki-nicheskiy-inatitut.
(Shaftug)

VASIN, G.G., starshiy prepodavatell
Synthesis of' a two-crank four-bar linkage. Izv.vys.uc~,.cL.zav.;
meshinostr. no.11:40-49 '61. (MIRA 14:12)
1. Chelyabinskiy politekhnicheskiy institut.
(Links and link motion)

VASINp G.G.f inzh.
Unit for experimental investigation of the motion of shafts of an
inertia,torque converter. Test.iaaah. 41 no.3~24,-27 Mr 161.
1 1 (MMA 14:3)
(Shafting-Testing)

S/145/62/000/002/003/009
D262/D308
Al
IL'i TTTC, jS Balzhi, Candidate of Technical Sciences, Docents
and Vasin, G.G., Senior Lecturer
TITLE: The effect of the linear iara:~,eters of -t-he impulsator
on solac work factors of t~,e inertial torque converter
PEINDICILL: Izvestiya vysshikh uchebnykh zavedeniy. Mashinostroye-
niye, no. 2, 1962, 23 - 28
The paper is a continuation of a previous one by G.G. Vasin.
M", the impulse 11
mecha-ism on the
Ile e-P'ect of th.e linear parameters ol
character of the shaft motion is investigated. The following conver-
ter factors are taken into account; 1) Variation of rotation of the
.~.eading shaftt when the reactor is at rest for various speeds of
t',,~e motor. 2) Variatlon of rotlation and synchronization of movement
of all shafts (direct drive) for various speeds. )) Variation of ro-
-Gat.ion of the leading and driven transmission shafts for vari-ous
gear ratios and constant speed. 4) Motion curve of reactor for con-
stant speed and various gear ratios. 5) Charact 'eristic boundary
-noints on the reactor motion curves definine the transitional opera-
~'ard 1/2

S/145/62/000/CO2/003/009
The ef-Eect of the linear D2052/D308
ting conditio'ns inside the cycle. It is stated that the experimental
results agree fully with the theoretical ones. There are 1 table
and 7 figures.
.;'ISSOCIA'.T'ION: Chelyabinskiy politekhnicheskiy institut (Chelyabinsk
-itute)
Polytechnic Inst
SUBMITTED: November 22, 1960
Card 2/2

VASIN, G.G... iwhe
Determining optizm= geometrical parameters of a foux-bar double-
crank, linkage. Vest.ma--hinostr. 42 no.5:40-41+ My 162.
(MIRA 15:5)
(Links and link motion)

VASINI G.G., kand. takim. naukt doteent; POLYAKOV, A.Tj., starshly propodavitel,
Kinematics and djnamics of basic elements of an automatic
variable-speed gear transmission. Izv. vys. uchob. zav.:
mashinostr. no.3:79-87 164.
1. Chelyabinskiy politoklmicheskly inntituL.

VASIN, G.G., kand. takhn. nauk, dotsent; BAZHENOV, S.P., aspirant
Effect of linear parameters of an impulse starter on
contact stresses in the free-wheel mechanism of an inertia
torque converter. Izv. vys. ucheb. zav.; mashinostr.
no.5t43-48 165. (~ffRA 18:11)

~ . . A - - - L x I
'. I, I

SOV/?0-3-6-24/25
AUTHORS: Yaroslavskiy, Mi.I., Pozdnyakov, P.G. and Yq,~~in, I.G.
TITLE: On the Form of the Oscillations of Doubly-c3nvex quartz
Lenses of the AT Cut (0 forme kolebaniy dvoyakovypuklykh
kvartsevykh linz sreza AT)
PERIODICAL: Kristallografti, 1958, Vol 3, Nr 6, pp '/63-4 +1 plate
(USSR)
ABSTRACT: A quartz lens cut from an AT-cut slice of quartz was
used as a piezo-electric resonator. The radius of
curvature was 250 mm (each face)f the axial thickness
8.7 mm and the square of side 82.5 mm was further tri=.ed
by a circle of diameter 89 gim. The fundamental frequency
was 212.6 kc/s and excitation was by electrodes kpplied
simply to the curved surfaces, The lens was suported
by four wires soldered to the edge at points 45 away
from the X and Z' axes. Dust figures (Chladny figures)
formed in ly-copodium powder were examined. There was
always a nodal line perpendicular to the X-axis and as a
first approximation oscillations were pure shear waves
propagated along the X-axis (electric axis). It is
deduced that the supporting wires should be fastened at
two points at opposite ends of the nodal line lying along
,~;ardl/2 the ZI-axis. "Outline" oscillations at 53.8 kc/s can also

SOVAO-3-6-24/25
On the Form of the Oscillations of Doubly-convex Quartz Lenses of
the At Cut
be easily excited. Here the nodal lines form a right-
angled cross along the X- and ZI-axes. Oscillators
operating in such a mode may have considerable (unstated)
advantages. Acknowledgments to Ye.D. Novgorodov,
I.S. Zheludev and A.I. Tiranov. There are 4 figures
and I Soviet references,
SUBMITTED: July 23, 1958
Card 2/2 USCOIMM-DC-60-609

AUTHORS: vn-qi n -- 'G
, Pozdnyakov, P. G., 20 -11) -.'-22/65
'-
Yarosiav
s I ,M. I~
.
TITLE: A Precision Quartz Resonator of High quality and Small.
Temperature Dependence of Frequency (Pretsizionnyy kvartsevyy
rezonator s vysokoy dobrotnostlyu i maloy temperaturnoy
zavisimostl.yu chastoty)
PERIODICAL: Doklady Akademii Nauk SSSR, 1958, Vol- 119, Nr 3,
PP. 481-483 (USSR)
ABSTRACT: In the USSR 9n recent years resonators with very high Q
(until 17.10 ) were developed, the quartz element of whir-h
consisted of a biconvex polished nonmetallized lens in a
holder with air interspace (refs. .5-8). These resoiiatars,
however, have only a very low mechanical stabilitf. A further
particularity of these resonators in the quite high equivalent
active resistance Rq (at least 100 ohm). This comp! cates
their application in such generators, which are in3talled
in a circuit with low-frequency bridged In the precision
quartz resonator, which was developed by the authors, a bi-
convex lens with AT-cut was used. For the increase of the
Card 1/3 resistance of the resonator against external mechanical

A Precision Quartz Resonator of High Quality and Small 20 W) 5 22/65
Temperature Dependence of Frequency
influences the crystal was fixed by wire atring3 (wh4,;h 'n
two points were soldered on to the front fa,~es of' the lens).
The electric voltage was conducted to electrodes, which
directly were applied upon the surface of the quav~? -lement.
The wire strings simultaneously served as lead-in wires. The
gold electrode was applied by sublimation in Lra-,aum upon a
chromium base, which was applied in the same way. Su.-Ih a
construction made possible a reduction of the equivalent
active resistance of the resonator to from 2 to 6 ohm. B~r
means of several experiments the following was found: Very
high electric parameters can be obtained, if lenses with
31.5 mm diameter and with 150 mm radius of curvature are
used. In this case no limitation to circular lenses is
necessary. By application of square lenses valuable quartz
material car, be saved and by a corre,~t choice of tni para.-
meters a constancy of the parameters of the resonator ir, a
given temperature interval can be obtained. In most resonators
of the here described type no polished, but only cut crystals
were used. Already with such a treatment resonators with a
factor of merit of at least 2.106 were obtained and in some
Card 2/3 cases values of (5 to 6).106 were reached. B- poliolaing the
0

A Precision quartz Resonator of High Quality and Small 20 -.1.19-3-22/65
Temperature Dependence of Frequency
quartz elements values of (7 to 9)-10 6 were reached, The
lowest'temperature coefficients of the frequency were
obtained in resonators with quartz elements, which have a
certain here given shape and here given dimensions, wher~,by
the cut angles are YX1/35003' to YX1/35004'. The typical
temperature frequency characteristics of the resonators of
the here described type are illustrated by a diagram. The
thus constructed resonators were encased in helium filled
glass flasks (,\/5 torr). The concrete values of the parameters
of some resonators are composed in a table. A more exact
investigation of the aging of the resonators still lies
ahead~ There are 3 figures, 1 table, and 7 references, 4 of
which are Soviet.
PRESENTED: November 15, 1957, by A. V. Shubnikov, Member, Academy of
Sciences, USSR
SUBMITTED: November 5,1957
AVAILABLE: Library of Congress
Card 3/3

S/887/61/000/000/o66/o69
E202/E155
AUTHOR; VA'sin I.G.
TITLE,: Method of deposition of silver coatings on a surface of
quartz plates. -:
A.c. no.107572, cl.21a, 10 (z-no-557811 of September 19,
1956)
SOURCE: Sbornik izobreteniy; ul'trazvuk i yego primeneniye.
Kom. po, delam izobr. i otkrytiy. 16109cowt Tsentr. byuro
tekhn. inform., 1961,101.
TEXTs- A method of silver-coating the surfaces of quartz plates,
which way also be used to deposit this; metal on the surfaces of
other mAterials, such as mica, glass, ceramics, plastics etc., ~x
described. Deposition is carried out by precipitating silver,-
which is reduced from solutions of its salts, while simultaneously
applying ultrasonic vibrations to the said silver solutions. The
process of silvering quartz plates consists of the following.'
Quartz plates are first ground and polished, and prior to the treat-
ment are subjected for a short period to etching in hydrofluoric
acid or in an aqueous solution of calcium fluoride. Then the plates
are washed in boiling distilled water and even more complete
Card 1/2

Method of deposition of silver ... S/887/6l/ooo/ooo/o66/o69
E202/E155
cleaning is achieved by subjecting the silver solution, with the
plates submerged in it, to the action of intensive ultrasonic
vibrations for a few minutes. The residues of all conceivable
impurities are thereby removed. Afterwards a reducing agent is
poured into the silver solution and the action of the ultrasonic
vibrations is continued. The reduced metallic silver deposits
itself as a fine film on the surface of the quartz plates. This
film is very strongly keyed to the crystalline surface and has a
very dense structure. In contrast to the existing methods of silvcr
precipitation from solutions of its salts, in which particles of
silver of different degrees of cohesion appear on the surfaces of
the silvered objects, the present method deposits only those
particles whose banding is higher than a certain determined value,
which is fixed by the intensity of the ultrasonic vibrations. The
use of the present method permits depositing firm silver films on
finely-ground and polished quartz plates, and thus improves zhe
frequency stability of quartz oscillators.
~Abstracterls note: Complete translation-I
Card 2/2

34734
S/07o/62/007/001/020/022
a Mll/ / 3 3 E192/E382
AUTHORS: Vasin, I.G., Poz)nyakov, P,G., Khramov, L,V,
and Yzw-oslavskiy, M.I.
TITLE., Quartz resonators with slotted piezo-elements
PERIODICAL: Kristallografiya, v-7, no. 1, 1962. 150 - 152
TEXT,- At audio and ultrasonic frequencies it is.often
necessary to employ quartz resonators having a low temperature-
frequency coefficient, a high quality factor, a low resonance
impedance and, in some cases, a wide resonance range which can
be achieved at comparatively small values of the capacitance
ratio C o/CK. Such resonators are required, in effect, to
combine the merits of the resonators with rod-type piezo-
elements and the resonators with twin (bimorphous) elements
without having their disadvantages. The authors designed
(Ref. 3: Author's Certificate no. 123573, July 28, 1959).
prepared and investigated a piezo-element of this type
satisfying the above requirements. This is achieved by cutting
narrow cavities (slots) in resonator plates or rods, the surface
of the slots being parallel to the edges of the plates or the
Card I/%

S/07o/62/007/001/020/022
Quartz resonators .... E192/E383
rods. Thin metal coatings, used as electrodes, can be deposited
on the surface of the slots. In this way, the problem of
producing a crystal piezo-element with one or several internal
electrodes is solved. The electric field applied between the
internal and external electrodes has opposite directions, so
that linear deformations of opposite signs are induced in the
element, These result in its bending in the plane parallel to
the edges. In this case, the piezo-element with a slot is
analogous to a twin element and, consequently, it has a low
electrical impedance. On the other hand, by using rods of the
XYt/ao cut, whose temperature-frequency characteristics are in
the shape of parabolas whose apex can easily be controlled by
changing the angle a 0 of the cut and by suitably arranging the
slots (as shown in the figure), the disadvantages of the
rod-type resonators can be elimin-ed (i.e. the inherent high
values of R K and LK are reduced). Further, due to the
large reduction in the equivalent inductance of the resonator,
its resonance range is significantly increased, It is also
Card 2/4

Quartz resonators ....
S/07o/62/007/001/020/022
E192/E382
pointed out that the frequency coefficients of a slotted piezo-
element are slightly reduced due to the fact that its bending
strength is decroased. Due to the low resonance impeannce of
slotted resonators their oscillatory tendency is greatly
increased in comparison with the solid piezo-elements of the
same dimensions.
There are I figure, 1 table and 4 references: 2 Soviet-bloc and
2 non-Soviet-bloc.
SUBMITTED: June 8, 1960 (initially)
July 31, 1961 (after revision)
Card 3/'~

SOU
ACC NR. AP6035850 RCE CODE: UR/0413/66/000/020/0058/0058
INVENTOR: Pozdnyakov, P. G.; Vasin, I. G.
ORG: none
TITLE: A method of regulating the frequency-temperature characteristics of
crystal-controlled resonators. Class 21, No. 187092
SOURCE: Izobreteniya, promyshlennyye obraztsy, tovarnyye znaki, no. 20, 1966, 58
TOPIC TAGS: resonatort piezoelectric crystal I temperature characteristic,
frequency characteristic, nonelectric regulator , high temperature coating
ABSTRACT: An Author Certificate has been issued for a method of regulating the
frequency-temperature characteristics of crystal-controlled resonators. To adjust
the top position of the frequency-temperature curve,.a coating is either applied
or removed from the surface of the piezoelectric crystal at the region of maximum
stress at the fundamental frequency. The coating consists of a material with a high!
temperature coefficient of the modulus of elasticity.
SUB CODE: 09/ SUBM DATE: l5Mar65/
rd 1/1 UDC: 621.372.412

S/137/61/000/007/024/072
A060/A101
AUTHORS: Bursin, A. V.; Vasin, 1. 1
T1 Conditions for obtaining a steady state while rolling thin-walled
angle profiles
PERIODICAL: Referativnyy zhurnal, Metallurglya, no. 7, 1961, 7-8, abstract 7D45
("8'o. nauchn.-tekhn. tr. N.-i. in-t metallurgii Chelyab. sovnarkhoza!:
1960, no. 2, 95-102)
TEXT: In this work an analytic method is derived, for the first time, for
calculating the parameters of the strain seat during rciling of angle profiles,
the roll diameters at the gripping Instant, length of the strain seat, the reduc-
tion of the edges at the time ef deformation, and the distribution of reductions
among the rolls. The main factor determining the stable position of the profile
In the gripped wedge of the r,_)II 1s ld/lgri where ld Is the length of the
deformation curve 1 1 is the total lengt9 of the bending curve of the edges.
Increase in the a;sofurtep reduction of the edges of the angle In the planishing
stand and a 'reduction in lgrip leads to a more stable position of the profile
relative to the roll. Experimental rollings of thin angle profiles in existing
Card f,/2

5/137/61/000/007/024/072
Conditions for obtaining a steady state ... Ao6o/Aioi
mills have shown that their productivity is reduced as compared to rolling of
ordinary angle profiles and that the quality is reduced, mainly on account of the
deterioration of the stability conditions of the equilibrium of the profile In
the rolls,
A. Bulanov
[Abstracter's note: Complete translation]
Card 2/2

S/'IL_157/6 21000100 310 7 7/19 1
A&c6/A i ol
AUTHORS: Bursin, AN, Vasin I I Vyzokovskiy, S.N.
TI'ITE DeterailnlnK, the moment of rolling, depvndinj, on the position of the
resultant of metal pr-essurva on rolls
PERIODICAL: Referativnyy zhurnal, 1,1-aLalluri;iya, no. 3, 1962, ~, abstract 3DS
-("Sb. riauchrio-h-_-klin. tv. U.-i. in-t metallurgit Chelyab. so,.,narkho-
za", no. 3, 97 - U~3)
TEXT: A formula ir, d(-,,r.Lved which makes it possible to calculate the values
of the arm of -,he resultant of vietal p~-N_,ssure on the rolls, depending on various
parameters of the rolling procei3s, With the aid of this formula it is possible
to analyze the offoct of' various factors during rolling upon the position of the
resultant; the formula, mor,_-over, makes It possiblc to determine more- accurately
the necessary power of motors, when destgning new rolling milln, and when setting-
-up reduction condlti,)ns for existin;T mLlIr,. A riethod is suggested of &-termining
the friction coefficient from experir,-P,-ntal data of values of metal pressure on the
rolls and the moment of rolling.
[Abstracter's note: Complete translation] K. Ursova
Card 1/1

BURSIN, A.V.; GLADKOVSKIY, V.A.; VYSOKOVSKIY, S.N.; VASIN, I.I.
Disk dynamometer for measuring forces in rolling mills.
[Sbor. trud.] Nauch.-issl.inst.met. no,4:1-15-118 161.
(MIRA 15:11)
(Rolling mills-Testing)
(Dynamometer)

S/119,/63/000/00~~?14/016
D201/D308
V
an Vysokovskiy, S.N.
Y IT I I." Stress and pressure gauge
J,: ilriborostroycniye, no. 1, 1963, 28
T The! described pressure and stress gaup is.a steel
cylinder with a single I-pyer of bifilar tension- seasitiVe wire at its
side. The wires are, cemented togh-ther 'and 'to the 'surface *.of the -
C111J.11der, Cither with H -2 (BF-2) grlt~c or with 'a silicon compound.'
TO obtain a better stress or pro s6ure*.'distribution a small hole is
Oriklcd in tho cylinder wall. !~~q)erlments have sho%M-good atability,
r-liability and interchangeability of the gauge. 'Me gauges of the
tylic havo- the follo-aing characteristics: redistance R a 200
uirc diameter d = 0.1 nun; cylinder diaiieter D - 22.5 MM,
lv~;,,ht 11 = 46 mm, mxcimum rated gauge - load 12. to The gauge has a
lincar response and no hysterecis after 20 cycles of severe overloadft
in,,. Thcre is I figure.

V A 5 1 N , I ~ ' ;
C', , I I ~, 1, r I - - , ~ , ~ 11 ~ . I . . ~ 11 -. . . ~ . I
ill%: ~ 110'i ~ f'- , I ., - _ ~. - ll~, I .

eZ, L 10315-6 r:WT1(M)/F:WP (j )/TIC0 (0/MP (b)/ETC (m) JDIVAllbi/RM,
AGG NRX AP5023993 SOURCE CODE: UR/OW/65/ODO/009/0037/0039
IAUTHDRa Vasinp I* I*
W
ORG: Central Factory Laboratory of the Likinsk Bus Factory (Taentrallnays
savodakaya laboratoriya Likinskogo avtobusnogo zavoda) 5
TITLEs Plastic coating of parts by the whirlwind spray-coating method
SOURCM Avtomobillnaya promyshlennost's no. 9. 19659 37-39
Lcard - 1A.-
4ftl, T T ft
ABSTRACTt Plastic 'Coating dT parts by the whirlwind spray-coating method, in
which the.hot part, is dipped into a fluidized bed of plastic dust particless was
investigated* In particulars the equipment and operating regimes were developed
for coating of bus hand rails (32-mm diameter, 1-5-mm thicks 2-m long) with poly-
Ivinylbutyral (GOST 9h39-60). The equipment consisted of a 15-Kw heating furnace,,
ia fluidized plastic bed (see Fig. 1)p and a ball type grinding mM for producing
the plastic particles. The r&4-31ng tubes were heated to 300-31= in 5-6 miymtes,
dipped into the fluidized bed for B-10 secondss reheated to 200-220C in 7 minutes
TOPIC TAGSs- plastic coating,/spray coatings polymers plastic
-UDC-1 629-113i6mol-

L -1031546-
ACC NRt AP5023993
f Fig. 1. Fluidized bei~r polymeric
m
erialas 1 - powdered polymer tank
at
2
air supply; 3 - powdered
olymer; 4 - porous separation;
p
5 - air manifold.
(to smooth coating)s and then cooled. Tests showed that the coatings were
corrosion resistant (as well as water., oilp and benzene resistant)p wear
--resistantll the process was cheaper than multiple galvaniz&ng and simple enough
to apply. A small percentage of titanium dioxide fi3.lwffQM some coloring
pigments were mixed with the plastics Origo art* hass 1 table and 2 figures.
30 CODEs SUBM DATEs none
v-

VASINI 1.111.
I
Expand the list of ccopulsory paramters of te:sts of aateriale.
Standartizatsiia 29 no.5:51-52 IMY 165. (MIFV~ 11): 1)

VASINt I.N.
Engineering vork in the nommunist-Ilovayal Kine.
Ugoll UkrA 6 no.8:27-28 Ag 162. (MIRA 15:11)
1, Naphallnik proyaktno.-konstruktorzkoy gruppy shakhty
"Kommuniat-Novaya* tresta Oktyabrlugol.
(Donets Basin,44ining engineering)
f,qr-,
07

NAYSH9 M.N., inzh.; GULIDA, E.N., Inzb.;- VASIN, I.N., Inab.;
KO = VSKIry B.V.1 inzh.
Optimm cutting conditions for t1nish gear xmilling vith a
cutter head. Mashinoetroenie no.3:10-~12 Xy~e 163.
(KIRA 16:7)
1. Luganskiy teplovozostroitellnyy zavod.
(Gear cutting)

GULIDAv E.N.; VASIN, I.N. I
,,-I , - ~-
Now cup-shaped cutter. Manbinostroonle no-3:17-18 My-Je 163-
(MIRA 16:7)
(Metal-cutting tools)

VASIII, Jan
Effect of catalyst concentration on the composition and
volume of production costs. Chom prurr, 13 no-5.14akromolel-ill.111-i--.'~.
latky 13 no-5:274-277 163.
2. Vyzkumny ustav makroinolekuland chomie, Drno.

VASIN, Jan
Dependence of the construction time on investmen% ftpenses.
Ghem prum 14 no.lt40-41 Js.164.
1. Vyzkumny ustav makromolekularni chemimpBrno.
N;

1~ . -ed.
,~.I. ; VASIN, I r,.. I-nzh..
LAPSHIN.9
[Special chapters Of L*!~viced a le, --,1; rl
fizichoskoi k*pir,. II ;
conspoctus] Spetsiallnye glavf
konsl,ekt lekt.9ii. '4,01;kva~ Energ. In-t. 1,L-l. !,)~`~3-
75 P.

YASIN,, L.I.
Some gas economy potentials. Gaz. prom. 7 no.2:32 162.
(MIRA 17:6)
)Y1

VASIN, L.V,, inzh.; AKHUN, B.N., inzh.; ITLICIENKO, N.N., kand. teklui.
KOLLFROV, L.K.p kand. tekhn.nauk; NIKITINA, N.V., inzh.;
SOKOLOV2 S.S., kand. tekhn. nauk; FODIN, A.A. , red.; YU:LKETI~P,
M.P., red. izd-va; PETERSOI,, M.M., tekhn. red.; SPE---W;SWA, O.V.,
tekhn. red.
[Diesel and gas engines; catalog-handbook]
katalog-spravochnik. Pod red. A.A.Fadina.
279 p.
1. Leningrad. TSentralInyy naucimo-iseledovatel'skly
stitut.
(Gas and oil engines)
Dizeli i gazovye dvigateli;
Voskva, Mashgi,;, 1961.
(MIFA 14:12)
dizel,lnyy in-

AKHUNY B.N-;-YAS-IN,- L.Y. ; GITTIS, V.Yu.; KCLLEROV, L.K., kand.
tekhn, naulk; ABRA.MCV., A.M., red.; KOVALISKAYA, I.F.,
tekhn. red.; KOGAN, F.L., tekhn. red.
[Disel-gpgine manufacture abroad] Dizelestroenie za rubezhom;
obzor. Moskva., 1962. 132p~ (MIRA 16:7)
(Diesel engines)

VASINj,-L.V., kand.tekhn.nauk
Trends in the development of d-,'e3e-! ang-ines abroad. Enorgomashino-
stroenie 9 no.6:-'+3-1+8 Je 163. (MIRA 16:9)

VASTNq M.D. (Leningrad)
In search of metal......Hauka i zbyttia 21 no.2:16-17 F 161.
(MIRA 14:3)
(Metal industries)
(Dust,--Removal)

VASN, M.P., falldshor (selo KozIma-Demlynnovkn Belgorodakoy obInsti).
#.Wffv,k, ~ -
#-Wfjy - Syringes. Feld'. i ak-ush. 23 no.8:48 Ag 158 (11MA !!:a)
(snruas)

VASIN# M.P., felldsher (seio Xoz'mo-Dem'yFmovkn Belporodakoy obInnti)
--
Using injection needles without mandrina. Falld. i nkush. 23
no.6:52-53 Je '58 (KIRA 11:6)
(HnCDERMIO =DLHS)

VASINg N.
-
sailors' studY. sovo profsoiuzy 16 no.22152 N 160- (KMA 1491)
(Arohangel--Merohant agamen-.;duoation and trainir4)

VASIN, N.
tional work in the !-'Rrehant
For further imiprove=ent of the educa -
fleet. Rech. transp. 19 no. 6M-18 Je 160. (,%MRA 14:2)
(Adult education)

VASIN,
Keeping up with the Gorkii tradition. Sav. profaoiuzy 18
no.15:25 Ag 162. (KRA 15:7)
(Merchant seamen-Education and training) (Culture)

VASIN., N.,
They took part in the work of the Sixth Congress of Trade U-.q'Aons.
Rach. tranap. 22 no.10:4-5 0 163. (MIRA 146.12)
1. Instruk-tor TSentrallnogo komiteta professionallnogo soy-uza
rabochlkh morskogo i rechnogo flota.

VASII*p "., 1.odpolkovnik
Vi~,ht tractical and drill P2'0b!C= with an JU battery. -Vocn.vz-qt.
39 no.3;64-67 lir 150. (!-:1. A L/~-.2)
(Antiaircraft -uns)

-L,],, pudpolli~ovriik
-.VASI!Lt
Methcds t'cr t,,e --i' -a ua~.terj,, Vcen, vest.
- ( - ; : 1~ ,
41 Ap ' J2 (Antiu,,crsift artiller;) ;

VASIN, N., agronom.
Use organic refuse on fields. Rauka i pared. op. v sellkhoz 8
no.12:22-23 D 1.58. (MIRA. 12:1)
tRofuse and raiuse disposal)

VAS IN. N. A.
City refuse an a source of organic fertilizers. Zealedelie 8
no.io:66-70 0 l6o. (KIRA 13..10)
1. Glavnyy agronom instituta "Giprokommunstroy.0
(Refuse and refuse d1sposAl)
(Fertilizers and manures)

VASIN, H.G.
Combining undercutting and timbering operations in longwalls of
the Moscow Coal Basin. Ugoll 30 no.12:4-5 D 155. (MIaA 9:2)
l.Glavnyy inzhoner Normatlyno-Issledovatel'okoy stantnii se.14.
(Moscow Basin--Coal mines and mining)

VASIN, Nikolay Ivanovich; KANIUYiffll, M., red.; IVOOV, N., tekhn.
red.
(Peat resources of Kaluga Province] Torfianye bogatstva
Kaluzhakoi oblanti. Kaluga, Kaluzhskoe knizhnoe izd-vo,
1962. 69 p. (MIRA 17:3)

VASIN, N.V.
ncreame the Importance ani the role of shipa for the usn of
oprAadinp, political information. Rach.transp. 18 no.6.'22
j" 159. (ships) (MIRk 12.-g)
(Com,unist Party of the Soviet Union--Party work)

VASI N, N.Ta.
Surgical treatment of cysticarcosto of the fourth ventr1cle
and characteristics of the postoperative course. Top.nalrokbir.
19 nn.4:28-35 JI-Ag '55. (MIRA 8:10)
1. Is Nauchno-isslednvatellskogo ordena Trudovogo Kraswgo
Znmwni Instituta neyrokbirurgit Ineni akad. W.N. Burdenko
Akadexii zeditsinskikh muk SSSR
WSTICUMSIS.
brain, 4th ventric..Surg.)
(CM=RA1 VMMMM. Idseases.
cysticarcosis of 4th wentric.Eurg.)

AJ --, ." ~-- A- ~ ,, - I
VASIN 11.a,
Clinical aeoects and diagnosis of cysticorcosis of the fourth
vontricle. Yop~.neirokhir. 21 no.6:46-47 11-D 157. (MIPA 11:2)
1. Neuchno-issledovatell8kiy ordena Trudovogo Kreanogo Znament
Institut neyrokhirurgii imeni eked. N.H.Burdenko Akademii meditsin-
skikh nauk S-R,
(ORRIBRAL VENTRICISS, die.
cysticercosis of IV. ventricle clin. aspects & diag.)
(CYSTICXRCOSIS, diag.
IV. ventrile of brain)

VASIN, W.Tao----
t e dura mater of the
structure Of the blood supply system of th
brain in dogs. probl.govr.nelrokhire 3t381-387 159. (MIRA 16:6)
(DURA 14ATM-BLOOD SUPPLY)

KAMMLI, H.I., lmnd.med.nauk; VASIN. H.Ta.
Current problems in neurosurger7. Vest.AHN SSSR 14 no.7:
8o.-86 '59. (MIRA 12:9)
(IMVOUS SYSTham-swirmy)
0

VASIU. N.Ya. (Moskva)
Structure of-the vascular network of the dura mater In man [with
summary in Rnglish, p. 621. Vopr.neirokhir. 23 no.2:6-12 Mr-Ap
159,
(MIRA 12:4)
1. Hauchno-insledovAtillskiy ordena Trudovogo Krnenogo Zname~i
_n khirurgii Imo NO;- Burdenko AM11 SSSR.
institut GO
HAM, blood supply,
anat. (Rus))

VASIN, IT.Ya. (MOB]-.va)
liffective methods of aurge-rl on the diira nater. Vop.neirok-hir.
23 no.4:9-12 Jl-Ag '59. (MIRA 12:10)
1. Ilauchno-iseledovatellskiy ordena Tnidovogo Kraanogo Znameni
Institilt neyTokhirurgil imeni akad.N.N.Burdenko AJOI SSSR.
(DURA HATER ,surgery
techn, ca (RIIB) ~

VASIN,-11. Ya.
All-Union Conference of Neurosurgeons. Vap.neiroY-hir. 23
no.4:46-30 JI-Ag '59. (MIRA 12:10)
(BRAIN--TIRIUIS) (BRAIII--bWIGNRY)

VASIN, Lla... .,
Conference dedicated to the 83d anniversary of the birth of N.Y.
Burden1co. Top.neirokhir. 23 no.6t52 N-D 159. (xrRA 13:4)
(NIRV(XJS STSTIM-SURGIRT)

VA S IN, N. Ta.
Reflexes from the longitudinal sinus of the dura mater appearing
during sinusography. Yiziol.zhur. 45 no.10:1201-1207 0 '59.
(MIRA 13:2)
1. Nauchno-isaledovatellskiy institut neyTokhirurgii im. N.N. Burdenko,
AMN SSSR, Moskva.
(CEWRAL ANGIOGRAPHY)
(CRANIAL SINUM physiol.

c c L
irl i t) L. 5,~ u*e. 3 1 - , 4 L . , , - I
191-.0 Pp

VASIN, N.Ya. (Moskva)
&irgical treatment of subtentorial arsabnoid cysts. V&p.neiro-
khir. 24 no.5948-50 S-0 160. (NMI 13:11)
1. Nauohno-isqledovatellskiy ordena Trudovogo Krasnogo Zhameni
institut neyrokhrirgii Imeni akad. R*N. Burdenko AM SSSR.
(BRAIN-TUMMS) (CYSTS)

UGRYLR,',OV, Veniamin Mikhaylovich, prof.VASIN, N.Ya., red.; ijULIDYAYLT,
N.A., tek-hn. red.
(Injuries of the spine and spinal cord and their uurgical treat-
ment] Povrezhdoniia pozvonochnika i spinnogo mozga i ikh khi-
rurgicheskoe lechenie. Moskva, Medgiz., 1961. 246 p.
. (MRA 15:2)
(SPIVAL CORD-SURORY)
(SPINE-WOODS AM INJURIES)

VISIF, II.Ya., ktird.med.naW, (Moskva)
Regularities of collateral circuleticr 'n the rlu---,- mater of the
hunan brain. Vop.nairokhir. rc-5,34-3~ 161. (~a-ll 14',il)
1. Nauchno-insledovateltskiy ordena Trudovogo Krasnogo Znameni
institut noyrokhirur~,,ii Iment akarl. 1!.?!. Durdenko Mil SSSR.
(DURA HATER ( BLOOa -CU RCULATIOII)

DISIOILTSKAYA, V.F.; VASINP N.Ya.
Studies on the effect of subarachnoid =ycerin on the central
system under experimental conditions. Antibiotiki 6 no.1:44-49 Ja
161, (MIRA 14:5)
1. flauchno-issledovatellskiy ordena Trudovogo Krasnogo Znameni
institto wyrokhirurgii inioni akademika N.N.Burdenko.
I (ANTIBIOTICS) (RMPIRATION)

VASIN, N. Ya.
Genesis of epidural hematomae appearing without direct injurieB
of the meningeal vessels. Vast. khir. nol2tl22-123 162.
(MIM 15:2)
1. Iz Nauchno-isoledovatellskogo ordena. Turdovogo Krasnogo Znameni
instituta neyrokhirurgii im. akad. N. N. Burdenko AMN SSSR.
(HMATOMA) (DURA MATER-TUMORS)

VASRI, R.Ya., kand. med. nauk (Moskva)
Bouginage of the aquaeductus Syl-vii Jn inflarmatory occluillon.
Vop. neirokhir. 26 no.6t28-33 N-D'62 (MIRA 17:3)
1. flauclulo-issledovatellskiy ordena Trudovogo Krasnogo Znamei
institut neyrokhirurgii Ineni N.N.Bardenko AMN SSSR.

ZHUCHENKO, Daniil Grigorlyevich; VASIN NINA, N.D.,
..N.Ya., red.; PRO
tekhn. red.
(Metastatic abscesses of the brain] Metastaticheskie atstBeasy
golovnogo mozga. Moskya, Medgiz, 1963. 213 p. (MIRA L6:6)
(BRAIN-ABSCESS)

BOGOLEPOV, 11.K., prof.-, =1 A M., kand. med. nauk; CatINSM-0,
MI19MEV V.V., prof YIPJ:(A", V.A.,
A.M., prof.[deceasedi; * 31
prof.; SHARGORGESKIY, L.Ya., prof. (deceased
zasl. deyatell nauki prof.; GRASHCHUKOV, E.I., prof., otv.
red.; VASIV, P.Ya., kand. med. nauk, red.; CHULYOV, I.F.,
tekhn. red.
[Multivolume manual on neuroloMr] FLnogotomnoe rukovodstvo Fo
nevrologii. Leningrad, Medgiz. Vol.4.[(In two parts).
Vascular diseases of the nervous system and diseases of1he
vegetative nervous s-jstemj (V dvukh chastiakh) Sosudintye
zabolevaniia nervnoi sistemy J. za~)olevaniia vegetativnoi
nervnoi sistemy. Red. 14.1.ilogolepov i V.V.Itikheev. 1963.
618 P. WIRA 16:12)
1. Deystvitellnyy chlen PI-21 35SH (for Grinshteyn, Grashche&,ov) .
(GEREMOVASCULAR DISEASE)
(NE11NOUS SYSTEM,) AUTONOMIC-DIMMSES)

C,i

VAi I Aj ok-,%nd r
ya.)
ece,
-tion of
"AQ!,15 11MI the upill ogr,.f] lti;
t4 --%yk -nak-t- z I ~ -i% -
~k h , - .311 1 v i e, n
--ti-.-:ina, 1961, 250 1.

VA51N, N.Ya.
Bouginage of aquaeductus Sylvil in brain ti, rs with closed
hydrocephalus eyndrome. Zhur. neyr. I psikh. 64 no.8tll59-
1162 164. (MIRA 17:12)
1. Nauchno-iss-ledovatel'skiy ordena Trudovogo Krasnogo Znameni
institut neyrokbirurgii im. N.N. Hurdenko (direktor - prof.
B.G. Yegorov) AMN SSSR, Mofikva.