SCIENTIFIC ABSTRACT STAROBOGATOV, YA.I. - STARODUBOV, K.F.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R001652920016-9
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
August 25, 2000
Sequence Number:
16
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
![]() | 2.67 MB |
Body:
STAROBWATOV, Ya. I.
Structurt of the copulative apparatus of Hippeutis complanatus L.
(Gastr'opoda, Planorbidas) [vith sn-r7 in Rnglish]. Zool. zhur. 37
no.11:1743-1744 N 158. (MIRA 1.1:12)
l.Kafedra zoologii bespozvonochnrkh Moskovskogo gosudarstvennogo
universiteta.
(Gastropods.) (Penis)
STAROBCCrATOV. Ta. I. - -,
-
System and phylogeny of Planorbides, (gastroDoda Palmonata)
[with summary in Znglishl. Biu.1,901P. Otd.-biol. 63. noe6:37-53
N-D '58 (KIRA 1231)
(PULMONATA) -
TIKHOMIROV, V-N.; ZAGOROD"TA, G.Tu.; -STAR-Q!QgApyl, - I.; SHVXDCHIKOVA, N.K.
Juncus macer S.F. Gray in MoscoW Province. Nauch.dokl.vys.shkoly;
biol.nauki no.2:121-124 160. (MIRA 113W
1. Rekomendovana biologichostoy laboratoriyey Noskovskogo gosudarst-
vennogo unlyersiteta Im. N.V. lomonosova.
(NDSCOW PROVINCE-SIDGMS)
'IEP
, NIKOV, B.M.; STAROI@OGATOV, Ya.l.
Randr),,n cel@ for counting small biologic;-nl otlects. Trudy Gidrobiol.
ob-va 11:426-428 '61. (YmqA 15-1)
1. Kafedra bi-srozvonochnykh Moskovskogo g,-)sudarstvennogo
universiteta, Moskva.
(Flankton research)
MgRINA, V.V.; STAROBOGATOV.--"La.l.
Syetematics and zoogeography of priapulidso Trudy Inst.okean. 46:179-
200 361. (Kmk l4j6)
(Gepbyrea)
DE M TKIN, Ye.V.; STAROBOGATOV, Ya.I.
Fauna of fresh-water mollusks in Eopleistocene deposits of the
. Gornyy Altai. Dokl. AN SSSR 141 no.5:1179-1182 D 161. (MLRA 14:12)
1. Geologicheskiy institut AN SSSR i 'Moskovskiy gosudarstvennyy
universitet im.M.V. Lomonosova. Predstavleno akademikom. V.N.
Sukachevym.
(Chuya Valley-Paleontology, Stratigraphic)
NESISY K.N.; @TAROBOGATOV, Ya.I.
"Diving saucer." Priroda 51 no.4slO9 Ap 162. OURA 15:4)
1. Zoologicheskiy institut AN SSSR, Leningrad.
(Oceanographic research)
LOGVINEIIKO, B.M.; STAROBOGATOV, Ya.I.
Mollusk@ of the Caspian Sea and their zoogeographic relations.
Biul. MOIP. Otd. biol. 67 noil:153-154 Ja-F t62. (14ITiA 15:3)
(CASPIAN SEA--MOLLUSKS)
SlIAMBOWiTov, Ya.l.
Study ol the mollusks frcm the underg-aund vatera- of the Caucasus.
Biul. MOIP. Otd. biol. 67 no..6:42-54 N--DIf--;2 %,@aPA 17:7)
STAROBOGATOV, Yal.
Conference on the joint studies of fauna and flora. Okeanologiia
3 no.5.-938-940 163. (MMA 16:11)
NESISI K.N.; .STAROBOGAMV, Ya.I.
Charac-teristir-s-of fiah behavior.. Triroda- 52. no.9:lU-115 163.
(KMA 16: 11)
1. Zoologicheskiy institut AN SSSR, Leningrad.
G I YFA@ I.
GLIKOV, A.N.; ST1*ROB(IGATOV,
G
Which Rapana has settled in the BLqck Sea? 7ool. zhur. 43 no,9:
1397-1400 164, OAIR@ 17: 11)
1. Zool.ogicheskiy institut AN SSSR, Leningrad,
USTAPOBOGATOV, Ya@'I,
Zoogeographical regionalization of conLinental bodies of water in the
Pa3aearctic region. Dokl. AN SSSR 158 no.5-.222-3-12216. 0 16-4-
(MI RA .17: 10)
1. Zoolcgicheskiy institut AN SSE-R. Predstavlano almdemikom Ye.N.
FavlcvSkim.
STAROBOVA, Marie
-I-
Heavy minerals of the Magura, Flysch of eastern Slovakia and df
the Inner Cliff. Geol prace 63:47-52 162.
1. Ceskoslovenske naftove doly, Hodonin.
STAROBOYTOV, A.Ye.
Improving the productivity of cooking boilers. Bum.prom. 29
no.10:24 0 '54. (KLR& 7:11)
1. Starsbiy inzhener otdela truda i zarplaty Glavankhalinbum-
proza.
(Papermaking machinery)
STfiMDAIYDVA, L.; ANTUSHEVA. P., bukligalter
Our customers are workers of the Ural Electric Apparatus Factory.
Obahchestv. pit. no.9:8-9 S 158. (MiRk 11:10)
1. Diraktor stolovoy No.40 Vtorogo Sverdlovskogo tresta (for
Starodanova).
(Svardlovsk--@-Reataurante, lunchrooms, etc.)
GILISRTM, P.M.0 inzhenor *STARODMKIY, D.Z., inshener.
New brmsh and bog plows. Sellkhossashima no.4:5-6 Ap 157. (KM 10:4)
(Plows)
I ) 'r,-
GILISHUM, P.M,, inzh,; STARODINSiIY, D.Z.0 inzh,
Automatic equipment for mounting mcbines on tractors. Trakt. i
sallkhozmash. no.11;13-16 IF '58. (MIRA 1ltlI)
(Agricultural mwhinery)
GILISIMYN, P,M,,inzh,; SURODINSKIT, D.Zttinzh.
The FBS-2@60 mo=ted brush-brss@er and bog plow, Traicto i self-
khosmash, no,108-)q J& 139v (XIVA 12;1)
(]Plow@)
STt,,IlODIv`SlM, D.Z.
plow. Trrkt.l S In . r. 0.7:33-3h, Jl 159.
Wni-- r:-,A)
"Irl-L'i-n zznroda ifi-ni
(Plow@-
GILIS11TV14. P.M.. innh.: STAROD11MIT, D.Z., inzh.
Mounted scarifier for cultivating eoil before deep plow-
Ing. Trakt.1 sellkhozmash. no-10:30 0 '59.
(MIRK 13:2)
1. Spetsiallnoys konstruktorskaye byuro zavoda In. Okty*Lbrlskoy
revolyutsti.
(Agricultural machinery)
4--
GILISHTEYN, P.M., [Hillshtein, P.M.]; SViRODINSKIY, D.fr. [Starodyno'kyi,
D.Z.], inzh.
Mounted two-bottom brush-breaker plow. Mekh.sill.hosp. 10
no-12:24-25 D 159. (NIRA 13:3)
(Flown)
V
GILISHTM, P.M., STARODINSKIT, DwZ
Mounted cultivator wA scarifier for stony soils. Trakt. i
aellkhozmash. 30 no.8:37 Ag 160. (MIRA 13:8)
(cultivators)
w
GILISHTEINq P.M.; STARODIVSKIY D.Z.
Increase in the traction indices of a vheol-typetraCtor Operating
with a mounted plow, Trakt.i sellkhomsh. 32 no.9sl6-19 3 162
(MM 15;12)
1. Spetsiallnoye konstruktorskoye b7uro zavoda imemi Cktyabrl-
skoy revolyutaii.
(Tractors) (PlOving)
GILISHTEYli, P.M.; STARODINSKIY,, D.Z.
Si-nLrle-fr plows for brush and swamp lands. Trakti i sellkhoamah.
31 Ti.e.321 no-11:33@-34 N '162. (NIPA 15:12)
1. Spetaialinoye konstruktorskoye byuro zavoda imeni Oktyabr'Bkoy
.1-evolyutsii.
(PlWa)
GILISHTEYN3, P.M.; STARODIESM, D.Z.; TSDWERM, M.Z.;
DOGANOVSKY--k.G...
kand. oellkhoz. naukp reteenzent;
BUDIKO., V.A.9 inzh.9 red.
[Tillage machines for special purposes; their design and
calculation] Pochvoobrabatyvaiushchie mashizW Spetsiall-
nogo naznacheniia; proektirovanie i raschet. (Moskvap Izd-
vo "Mashinostroenie," 1964. 139 P. MIRA 17:11)
1. Vedushchiy konstruktor Spetsiallnogo konstruktorskago
byuro zavoda sellskokhozyaystvennogo, mashinostroyeniya im.
Oktyabrlskoy revolyutsii (for Gil'shteyn,, Starodinskiy,
TSimmerman).
(zA),
137-1958-1-98
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 1, p 16 (USSR)
AUTHOR: Starodonova, A
0
TITLE: Prepare Greater Skills for the New Washing Season
(Kvalifitsirovannyye metody - k novomu promyvachnomu sezonu)
PERIODICAL: Kolyrna, 1957, Nr 4, p 39
ABSTRACT: The training of personnel at the Chkalov placer of the Western
Mining Administration is described.
A.Sh.
1, Mining persennel-Study and teaching 2. Mining induBtr7
-USS
Card 1/1
VASILOYEV, L. (g. Tyumenl); CHICHKO (g. Kiyev); STARQDUB.,Y,,_(g. Liyev);
&QUZHSKIT, G. (g. Llvov); SMIRMV, T.; AUWSIN.-I.; ORLOV, I.;
FZRUK, V. (Kuybyshev); BYCHININ, 1. (Kuybyshev); BASHKO, V.;
SHNVKUN, Tu. tKharlkov); ISTYUPSM, V. (laningrad); GATSAHM, 11.
(Chernigovskaya obl.); SKMO, L.; SABTUK, M.; GUBANOT, L.
(Krasnodar); ITISHCHINKO, V. tipt. V. Sadoyaya); TWIMOV, M.S.
tLeningrad); MMROV, V.; SMOV, A.; TIMOSHMO, I. tOmakaya
oblast'); KRIVTSUN, B. kKharlkov); BARANTSIV, N. (Yedosiya).
Exchange of experience. Radio no-1:31,32,35,39,40. Ja '59--
(MIRA 12:3)
(Radio)
AUTHOR: Starodub, D. (Kiyev) SOV/107-59-1-26/51
TITLE: The Balancing of the Output Stage of a Transmitter
(Simmetrirovaniye vykhodnogo kaskada peredatchika)
PERIODICAL: Radio, 1959, Nr 1, P 32 (USSR)
ABSTRACT: The author describes a simple method of balancing the output
stage of push-pull type ultrashort-wave and short-wave trans-
mitters with the use of two coupling coils. There are 4
circuits and one sketch.
STARODUB, D., inzh.
Time relay for photographic printing. Znan. ta pratsia no* 12:22
D 16o, (MM .14:4)
(Photography-Apparatus and suyplies)
STARODIJB, D., inzh.
Homemade photographic lamps. ZT-n. ta pratsia. no. 4,.23-24 Ap 161.
(MIRA 14 @ 5)
(Photography, Flash-light)
STAMM, D. (Kiyev)
Indreasinp the flashlight brightness. Sov.foto 22 no.1:32 da
162. (MIRA 15:1)
(Photography, Flashlight)
STARODUB, D., inzh.
Homemade telephoto lens. Znan. ta-pratsia no-302 Mr 163.
(MIRA 16:10)
-STARODUB D inzh.
-11 @Izai"&Xw
Homemade telephoto lens. Nauka i zhyttia 12 no.2-62 F '63.
(MIRA 16o.4)
(Telephotograpby---.Equipment and mVplies)
(Lens, Photographic)
e... ''
y,-
f1. ".I. STAFtODf]B_, D.., inzh-.
News in photographic chemistry. Nauka i zhyttia 12 no-3:63
bir 163 * (MIRA 16:11)
STARODUB. D* .;.i
I
Signal generator. Radio nool:53-55 Ja 164. (MIRA 17% 8) ,
I
d
i
NEERASOVA, V.A.; STARODUB., N.P.
Chlorination of n-hexane on mixed catalysts and alloys of
metal salts. Azarb.khim.zhur. no.2:93-98 160 0 (MIRA 14:8)
(Hexane) (Chlorination) (Catalysts)
STARODUB, N.P. -
Turret head for a bench lathe. 14anhinostro-itell no.1:25 Ja
162,, (NIM 15: 1)
(Lathes-Attachments)
STARODUB N.P*
Universal block for moldoo .*ohiwotroitell noe2325, F 162o
(HIPA 1582)
(Die casting-Equipment and supplies)
STARODUB, _!!_,P,-
Universal dividing head. Mashinostroitell no.4:21 Ap 163.
(Milling 4 chines-Attacbmeots) ' (MIRA 16:5)
, 1@
REZNIK, B-Ya,; BRYUM, R.M.; STARODUBp N.S.; MANOLOVA, E.F*;)IVANGVA, S.S.
Schick's reaction in Stalino, children vaccinated against diphtheria;
atithorls abstript. Zhur.mikrobiol.epid,i im.=. 31 no.8:W Ag
160, (MM 14:6)
1. Iz Stalinskogo meditsinskogo instituta,
(STALINO-DIPITHERIA)
UGLOV. F.G.,(Leningrad); MIKMYLOV, S.S.,(Leningrad); STARODUB, V.I..
(Leningrad) -@' @, i '. -,
70th anniversary of the first Russian surgical journalOlhirurgicheskii
vestnikO. Vest. khir. 77 no.1:126-138 J& '56 (KUM 9:5)
(PMODICALS, hist.
Xhirurgichookii vestnik)
KIUMTLOT, A.A. (Leningrad); BTUKUT. A.L. (Leningrad); STARODUB, V.I.
(Leningrad) - WA"
History of the Pirogov Surgical becisty; ?5th anniversary of Its
foundation. Vest.1thir. 77 no,,11:9-25 N 156. (KLRA 10:1)
(SOCMIAS, NVICAL. blot.
Pirogov's surg. see. in Russia)
(BURGIRT, hist.
same)
USSR/Scil Science. Tillage. Land Reclamation. Erosion. J-5
Abs Jour: Ref Zhur-Diol., No 6, 1958, 24814.
Author Koshkin, N.A ; Starodubets A-V.
Inst
Title Experiment on Ploughing Virgin Land Long-Fallow
and with Ploughs With Helical Mold-Doards.
Crig Pub: Diul. nauchno-issled. i opytn. rabot. Ubinsk. opytn,
melior. st., 1957, No 2, 59-61.
Abstract: No abstract.
Card , 1/1
STARODUBETS, N.A., inzh.
Methodologi for determining the tensions and deformations in
the sleeves of the SMD-14 diesel engine. Trakt. i sellkho=ash.
no.11:9-11 N 165. (MIRA 18:12)
1. Moskovskiy avtomekhanicheskiy ims"itut.
AUTHORS:
TIME:
,S-F/1 R 6 D 619 0 Y
Nikonov, B.P. and
1, P,
Starodubov, I.P.
109-3-1?/23
Evaporation of Calcium from the Core into the Oxide Layer
(Ispareniye kalltsiya iz kerna v oksidnyy sloy)
PERIODICAL: Radiotekhnika i Blektronika, 1958, Vol.IIII, No-3
pp. 430 - 431 (USSR3.
ABSTRACT: The investigation described was carried out by 67_%method
analogous to that used by Ptushinskiy (Ref.1). A nickil cathode
containing 0.05916 Ca was used in the investigation. The cathode
was in the form of a cup whose top wall was coated with the
double carbonate to a thickness of 140 - 150 u. The cathodes
were de-gassed at a low 0temperature and then kept in vacuum at
a temperature of 1 000 C. The experimental tubes were then
dismantled and the oxide coating was cut into slices of 10 U
thickness. The amount of calcium evaporated intoothe oxide
layer as a function of the heating time at 1 000 0 is shown in
Fig.l. From this, it is seen that 'the amount of calcium is a
logarithmic function of time; this is also confirmed by plot-
ting the curve of Fig.1 to the logarithmic scale as shown in
Fig.2. The penetration of calcium into the barium layer is
illustrated by the curve of Fig.3, from which it follows that
nearly all the evaporated calcium is concentrated in the layer
uardlfi@earest to the core; this layer has a thickness of about 10 IL.
109-3-17/23
Ev@kporation of Calcium from the Core into the Oxide Layer
At a distance of 40 to 50 A from the core, the relative amount
9 of calcium is only 1 to 2106. .
There are 3 figures, 1 table and 1 Russian reference.
SU13MITTED: May 31, 1957-
AVAILABLE: Library of Congress ..
Card 2/2
w w
w
w
w
w '
* :::w
::
T
o
G
e
o
e *
o
o
P Ij 13 If is to H P, 1. 11 m r, m 1,
'
I
1
L 1 11 9 IF v tt 1 4 t
A
4 A
f
tA I't
nXkgl Steel, K. P
Effect of themal tf#Gh@l 02 bafut" Of cbfgs3e'
-6; cf. Mcceling al.tr.
Pom,; 1931. No. 12. M
g
t =00
to
Joe
00
e- as*
-
*-
, F .*
*
o
,
o
'
F
W too
@
ICATIC6
.j 410-SLA WALLIOGICAL LITIRAIL41 CLAItSI
- ------
lit
U AV 10 I'S' 'WT- v ow 0 a p I w of 5 a a
u
00000AD 000 0400006000000*00*060s
0 es 0000 too
0 0 0.0 0 0 0 * 0 0 0 0 0 0 a 0 4 0 a a
1 0 id it Ij w tj " 11 a tin nidis 11 M It 14 31 16 v N x a 41 41 41 "CO
0 "If I , 4 , , . 1 2
A 1. a h F 0 A I I v I -I A -1- 1. AA 4 9C go a I a f 0 b
00
-00
-OWYbdeavasi Oftel at various Stages of its
00 I..dU~Uuognpbk isvestliplim ad Chromw 1- 0
UCUVAL K. t' V pr@ F. M. GoaxAcnitvA. flumes 19M, No. 3, 44 41);
00 'ne
N.@ 4 -5. 47- M- AM00=--c uIvestiatiou was rusile of Cf-.%Jo steel analyzing 7 00
00 C 0,35, Cr*0.9 1. 1, and Mo 0.15 0.25%. 11hotonlicrographs were "Mic of samples @:00
0, 0 cast from a 40-ton basic otwn-hmdh furnace at various stages Of Oper2ticm, &act a'
ins steel. in or&r to find the dLstritmtion of iMPuri-
00 -wamless pip" wadc hum the result L MAIMINSItV
ties. wx1reatilwm and tAoWh(Acs. ...
00
00 j I
=00
00
00
60,
00. too
go 0
00 roe
0
0 ::so
00 - ;
P6 :J:
00
A S 4 1 k A AtTALIUPGKAL LITERATLAt CLASUPICAUCk K-Z
be 81 , -, , ! . . - I- --- - - - - . . Net
F C- J.( j I r.( 9*0
P,
Is Is
U A rpip apit MIX 9151 Plan Itx 3 a 3 a
0;6 606664 0 0 e 0 0 0 0 9 0 ii
*Teo 0 9 0 0 4, 0 so 0 41 4, so 0 000 0 090 0 off a 0 0004 o so so 0 0 * so 0
IF
w W 9 's W W . W w IF W Is IF WERIF, _W -W@'W_ V W
-o
1
5
0
0
it It -g
l W
1 1 Di
.
1
i
1
T w
4 i
d
ig
A
1
4
l
1
,
.
L_JL_ji_f_..Q L-l-L-A-VIN I T W
1
-
l ft
F
I
.5 ivmTjfxtK41rr. N., arm
. 14TAILOIJUIM)rY.
nVa M,,NU..
.
l
- Nvo, pp. ism.
"
ee
e IlluxtraW. DnepropeotmVsk, U.S.S.R., 1911. (111 Humsimn.)
Tive dnK pfift of lWfmor Nvotchnikafro book is ilovolM it) W1
investiption of the lita, of iogo4 am" as dq"mimmst on the com.
tion ami structure of do im from which they am snmmiat
Thia
.
followAA by a critica ezamiwioa of litmatum on the subi-t 01141
a mvivw of Ow rvmdta of the author's own P*
L-rinwnW work
Am.
.
p
-luAkA .
M
, In thp ascusul part alf the Iwkilt Ow author t@v%vm the varunju
lylwla of btrakdown 40 which the Walls of tho ingot mould sn' pobift-i Zee
00 in pmctitv; the induvi" of structure aml 4-orupwition in this nlp"
m- dnalt with. mul this tifo of dw gnoukl is dimcummad in rehation to
00 coo
0 ""Ps"ins"n"d fumhe obtained on the powth acast icon with mjwmt@j
hematin
: rnouma
f
di
i
14 0
:o O
l
g
c imu 41" clainwd So yirkI th. Ife.
Isnathy Pm
A biblioevalihy a" conewmahly go the v&luo of
zoo
w goo
o fee
I
a I Ives
zoo
too
A I a L A &I TALLUNCKAL LITtRATWE CIAWFKAIi"
10020 -4
0 1# w tv It tv W a4 a a ft a 9 91 It it 09 KID h I is AA L I I N 0 4 9 1 V IN 5 AS 4 3 1 9
09:::::IooooooooeeooooeeoedilooooooooooooegooooeI
00 00 00 0000000000 a a 0 Is &@*_t_o 0 0 0 0 0 0 0 0 0 0 0 0
W- W-
A
U, *Jt 's, wf I", ly, 34 Is 11 12 11 34 I'S 16 it It All I'l
IM
1
J
A L
1 t C t 1
4 11
u U
A IL
I
1$
1 jw
,
-
-
+ , -
sit"riwAs" on roaWg cubom and awmemm- 49-1
of bvb mvmhmjgw propetties, K. F. Slarimlalwy,
-
I Vowwr
1M Nil. 5. 14- Its. - 11w t@l wa@
c;im
414,," 11 futnam into 2.5-loll lllxt,t@ 3n,l The Wit'",
2
I
I kill'. ul,6 44, N I mill its ji4j,j, ams,
vf@ le 14-114fily of OWAinillor With grmle
-
,
l
l
i
h
-
rwa
ic2tv
t
Wilhou ilk- nm
mify 4 a cmilp
!
1.130 re@ulfs were fluile wkfactcxy. Tabl"
tivatintnt. zoo
givol 'Is"Willig chrin. uIld uIrch. prolviptieq, al@
i,hofurnicroataph@.
,go, zoo
00
1.00
90
CTALL
l
L
TINA
AGK 64C CLA%jWfCATbCM
It
4
A
u
L
(
*4@ s 1
*
T.1
00
.
u a Al so
11
i
a
0 ad I w a 2
R
n
40000
-00
0
T00
Too 0 0 0 0 f it ig
01 21 1.
000*1.900
o 0000 0*0 W
I dma.
0000000000000000000004:
1
oo *Ito o o 000 oo 00,00to o oovi2
----------
@*
-
46
i
@v v
t -A I- Z- m a (9
CA-1
l
al all Falls smado from Khmillevsk al"I.
K.--
00
No &W P. V. Tguimlal. Down It".
-@rrpd. fr(on Khalilov* sted at thr
3-14- 1 t
40
.
Pet sit rolling mill at I)m-propetrovAr were eurn.l. .
to st"fictme and mech. Ormorth compa. sit
in
sim used was 0.47-0.57 C, 0@54).g Un, 0.24-4lr, "s,
0,01 4).()&; S, 0.(YJ4-()(h30 P, 0.13-41.31 Cr and 0.31--
at the ewl Of the roiling Opmticm
m
T
Mi
O
.j e
.
p.
&twm Off mut WO'. The Khafilmsk rails zoo
cc favorably with lkownter or f4"-bmrth rails
coo
on h. 1"KNIti". S. 11. mad"r*-V -
.0*
OOS 1
1
W
1
,
Sol.-
t:99
As. St. .(TALCURGKAL LITE T%AF CLAJSIPICATVCk
CS
Ant Seado -1 O"INUS a a '> a
tfN91 fl
0 0 is
In*
0 0 0 0 4 OjO 0 a 0 0
0 00
:0 00** 0 ooe*
0
:0
00
010,31
0
0 @1)
:
mf i.A@I@I,C.KAL Litt
Is
(w
0 0 0 a a W 00000
0 a 0 * 6 ol 0 0 0000
'o 0
Ifto 0
060000 0 0 op a 6.0 w w -*r
0 0 @16
Ty J , .. . "' @ . I, 1 11 .
00
1
o
rw caallso machio" f
itic
lLA
f f
h
c
rr
uc o
as kmS as t
Few
H. W. Rathmanst
-00
:00
jz@@ aroo
10i (LAS11FKATIck .1
tt It M S I rw 0" 5 .61 a 3 9 V Ana
100044l*o;f;O;@ioooo*o*ooo*o
,- - - - - - - - - - - - 1 0-00 0004,
-6-9-11110- W-111 0-0 v W_ *-,iv --ta @f, 4 m a a a a 0 0 111 0 a - 0 - - - - - - - - -
'I j 4; 11 1. ly 3 If it, p U a .4 13 .4 zy A N 4 11 L. U w 11
'AA -j- at I 1 10 M at i
of go
00 11 Prod"tion of wrought iron by treating convvrtaf fittO
witk g~ffwgWouG "g.
'
. Ishlova. .9,11 k No.
N'slislailir and 1
wrl rinals. C lmks, hill 1), Q, -4 It IV- ORM
and P 0317,21?1, "1" 141"fed thramall fryttijammlia @hst. 1-@
es and other itti
liti- The
li
df
boa
t
ed
t
la
m
n
e a
r
gap
m
17
Xha 11 Q27
la Fe comalned C air
Si
j,plitili
an.,u
fl -
,
,
g
g
t).(ijti anti po.miM, and had ack-t na@ll- 11folk,
,
00 z
i fire. lU W, 1'rathrumm
00 zoo
00
00
g
0 zoo
00 a
0
0 zZagg,
00 9
0
0 ZOO
00 ::oo
Zee
3300
f
Aj o
to
S L a effALLUINGK-1, LITIPA Litt CLASSIPK411CM ce*
, go
@
to I. a -4 It R a as Is as
i
0 0 0004 000000
o
Z 0 0 04 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 00 0000 0
~
1 0 0 0
0@
00000,0000000
o 000
ooesoooogooo,ogo
00000000
I ooo
ol
-
00 A
0&
:0
00
0
X Id J4 W 4; 61 U110
J. a jx
PROV10#6 449
UACROLMCTLU @-F CAST IRON XJ. Starodubov and F.M.
Gorbschava. (Metallurrist pp. PO-94).
The uuthore have Invostigated the maorostruoture of a cast iron
mould by etchir-C with Bsunsu-zts reagent and He@mlv reagent. -041
The first reveals a dendritio structure# orientated tranb7arsely
in a 25-mm. thick surface layers and chaotic in the irside. This
is the primary structure. Heyn's metliod shows the Clobular
soca.,.detry structure. (In. Russian).
tM344a "Ll COT ISM(
U -0 lt@ 0' It, ; J, 1. .1 , 1., .6 , " r. tit
OK Q.- M
I aw a 0 W I Ara a a 2
0 11 0
to It u 11 14 is m I? is it m ! 11 a a N b 26 27 28 it Ill P 12 u 34 b 36 0 4 J. v .1 u is 0
a L -F H I R L --A m V 2 It- 1 -1 --- ILA , I v Z kA VQ_ a A % _&@
41 r
0 0 Nct-0"$ .10
0 0 Tit. Vdt,cc of dillicAligli, (in file jillptel realitimilet, .1 IAO
00
tens. k F. Mait.litimw will 1'.
r,
193 1, 4.7c'll. I*- t Iw 1111IIa-1 I ","I all,-,- 'If 11,11 @1-1
bi, I-
it III I- vel v- iq ittir.
11,110.1,4111, All 'Iti'mpt A@%,t i,-
1,;s
0 1 1 bv atill, .-Im, al I,.%. W41, 1.4 "'At lut will- I Ill, Iw-ll
fleMpurist Kaw %(*,.I re,,iltoll 411114,11j;I1 it OA4 lik-Ir-1V
I-mi 0* sted till" slowly aftu amicalim (liv hirlict
00 :'j)jj 111111tllift trilip. wak as%.t thl- longvr If all-
1J."slinx. Ill Or nvixilluallitimi of NMI' 1114' rel 1110 1.1 Iw woo
a (Oull r Ili "In-Ird li-mil Vill it fit 4 $If VAA air M-0-M,
0 0 Me cissfing Thr mentiftectur. of a prolvelor fitimp.
Vall I J8, 2;.. M(l9litl Ais illo- 0 0
trated dewriptiun of lite llt&kkltlf. of Zn die VaI,lilllgli.
A. Nimlicr
I.-iois
go @c 00
I Xse
go
04
00
go
A 0 it A IttAitt"rOkAl tillff-IU111 CL.11IFIC4110%
:roo
u is AV .3 is fV It kv to 9 a a w It It n it" it tv lW n 1 1 s 0 fw 0 0 a I v It a 3 1
101T., b 00 0 e:
0 0 0 0 0 * 0 9 : 0 * 0 0 0 0
0 & 0 0 0 0 411 0 0 0 0 0 0 0 0 0 0 ore 0 . 0 0 0 0 9 0 * 0 0 a 0 0 0 eiA
04# 6
0 JL 'L
00
00
IL
0110c0i; S @Aaq ;4004 71; woes
Fmw w6l Im SWW to be dist F 11. 8,Wh k.ff
ni
and K. F. @ Starodullov. (Stal, 1938, No. 11, pp. 41-46). (In
present a detailed review of the literature
from 11131 to 1937 toWher %ith their own experimental results
respecting investigations of the quality of iron for making ingot.
!noukla, and they find that all invmtkqatinna recommend thi use of
Iron with a pearlitie structuir, a fairly high-mrbon content and with
not too cow" $MphiW. 7U tem@svatm at whiell the metal in
cast othould be about I 1*41WC. The authont corn nA the
1ifL' Of InOUkIS 11184le Of A &Mtie@rlitic type of ireln wi,r,,,,. of
moulds made of pearlitic irons two mmritiona, (1) ailicon III I
manitanew. i%. anti (2) silicon I-GO/. ant manganew 1-5%, anfl
found that the peaditic iron moulds laxic4l two to five timea 40 long
depending upon the ortwiling.conditions. In order to detcrutinu
the atructure of the irm without n%wrting to a microscopical
invimigation, the use of Maurer's diagram with corrections for t Im
phosphorus and manganew contents is recommended. (Ser
.1ourn. 1. and S.I., 1937. No. IT., p. 0.09 A).
S a - I L A@ !!T'uL@.L LMNAYURt CLASSWICATON
19;C80 110 DWV 08C
U a AV ;a, 441:W1 a, ICU,
so AS t9 Is
0000 000000000"4000000
000 44 0.0.0 0 A-1111.
CW
An A s a no
06000000000000000
AAA-0 * 000000000000
WID A
100*0000 fee* so 00 11-6-
0 ULM V, IE4 v A- -2
0041 o(agias and of Other fac-10-1-s 110 jllift - - - -- -66
6901 ov IM ofamptlan and of bollor swel. K.V,*-'--------,,--...
00 Staroduboy. Trariyv: Piraki. 1,47-@)(VW)) --- -
at WA)' the steel (C VVS 41,12, '.@Jn .00
8 0.011) 11.11-YO, P 0.411-4-0.0527c) cimsioed of
of
very fine pains. On heating tO I-NXI* arid Ctx)linK in Ow
air the Pains grew larger and the strel sciluirrd the Witt.
the eltingation itn,l ioiliAct ttrcngili
dfvvra@41 by I!10 "r '!.. Steel tkniffIrl Contit. PAP!, if, 111"'.
L' wriv firairil in a1mve At,. sapidly i-mils-4 la %0" sn-l
ow Y r,,olmt to Vkt' (1); heistmi it- Alo-we
cv@oled in a disconnected lab. eltv. oven to %v` And
0 10 4Q couittl to Wkl* (2*%in.l (2); beat"I 1., 740'.
00 J NO' W/min.) and to &A)* (3j.
In (1) a (2) the inipact strength arril the clongatiatt =00
I
*0 feervased -sharply. in (3 1 the impact strength drereaw,l.
00-3 Init the elongation increased. These rrstilts are attribut"I
to change in the structurr of the steel. In (:;@ a consider. 000
ablY greater coagulation of cementite takes I)Lwe thAn in 200
00- (1) and (2). The effect of aging an the tnech. prol"tir, ix
4 boiler steel was inwatipted both after hardening in 4141
00 a water from 7201 and tempering at 1001 for various tone, see
of S and after cooling learn 720' untler vvrtdition@ -imilAt to
fit shetts and it, a@
j pO&Ction ciyaditims: betiseen 2 vo
OW draft followed by tempering. In both cases the
haidnu increawd and The impact strength iteenawd-
trips, 60 4n4 100 non. wwe' of e cut off frorn the
well
ft-t steel anif the tension created in the metal will i"-
vestiffated. From them strips 411-111111. AAMPIE1 were --oO
taken by cutting CA .5 4011 -10 turn- I'mm Cwh %ide of the
In both casin the endu-- U96
Mi. and lotl@mm-stl
litnit Increased alightly. and the FrIAtivt el"Is6m "t the
'111m, 'trip ""ma'sell
114114tLURCKAL L111011ROmple taken f1tiol the N1 -10,
W. R71111"17
-L-- 7 1 -Ir--T-T -14" - An i
U uAq .01%,* rw 0 0 0 1 K so 0 .0 a 5 1 9
1 a W a IV 0 * of It N W PC a it K . .
000 9 is a 0 0 * 0 a 000 0060 000000, 1
0 1
& 0 0 0 4 0 off 9 * 0 0 0 006000,
* 0 0 a 0 a 0 " - W-0 -*-*v -- - -
-
-
0
A
-
-
"t, *- -
-& A
0 0 64699004000*00 T. -@ -?- R-,
-- -
J, I - If " 11 f, " 11 m @ I . " 1 1. . . I . 11 .
*3t @ " I I 1 4 . 0 1 ; I 1 11 - .I I .. - IF
.1 #1 11 .1 . F,
r.--A-j x J, A m r 4 it i v I- AA ft " Lt- ttiv % - I - 4 . t I k -
7 @
-4 as A A 4 ,
#kv
A DwlW of cM m" made d blast-fumace iron.
F. Starodubev, fi. S. Hankli wul I%. Ya. GIIL-m,
-
J. NO.-9/10.
M-5004-7).-Cbein., phys. anti evoutimi,
data. Nf. lfa@ch
00
see
00 j il
00 0 i coo
=00
f too
a
1
4 9 600
-
0 =00
4100
300
goo
1 tgoo
coo
A;L
s OEIALLUgGICAL LITINATURIE CLASSIOrKATICM z
6*0
@Lv Q.. oat it li-I 4i -Cv --Lir
' 0 0
r-q
u it AV po Lt! 9, ED tv tp Mi* was, tttct Itil
1 a a I ZA An t s v nd o w v i m so 0
MID n I igm a 4
00000000 0
00006 -
3k 9 v
40*
12
9000000000000000
000
. '60 00 OD Go 0 * a 0 o 0 0 a a 0 0 0 0 0 0 0 00
0
0 0 0 Goo* 00000000 0 0
q 00
0 0 0 e 0 0 0 0 0 171111
gTi-0 0 -a* 0
;1 1
A
:
A -C- f--J@ ft I K @L
.JL-kj
0 T
TeuWw b-demim of embom mM.
F. *&M
Jubav
-
Propetr-k metautirgic-al twit.
-6iliPl. rxd
sr'. Lf-R.S.S. 33, 213-IS(IjM6).-The change ;i I
reptrwilled by elvatic, rather thall
MlI
t
tM t
h
i
il
d
t
N
1w
av- -
m
a
y. A M1111111 N111VIdUS ClIrt-1 I%
t
"
r4fvftblv at a"t &W. Un the ba,,is W ("tilts of -
1
isotberink hardening at 3SO
. ineasurenwnt of clec. re-
t
i.ti
il
bi
i
v
t
, rar
c cunlent, 4tnj C c4une"t, it I% ec"tclulieti
I
that tile V111VIS Orr Milled to tramfulinatim 44 cathille
.
ro 0
.
.
e.g.. f-'sumfit"I (4 ctilivilthe frunt raffbide tit 1111
Tur,fiat zoo
"
e
C01111111
pr@llt In hard
u
1
I
I
I
.
r
e.
S
M
at
tm-tenl1wrillit -00
00 It. C. Avuk@-Irn
iz go
60 J
@00
00
0
00
too 0
0
ITINATtAt CLASSIVICA11(ni C-2-
1 -00
. L
IL .11ALLURGIC4
40040 .-9 goo
An I I I rw 0 1 Sr IS I All a 3 1
if li-8 - 41111
u 9 AV 03
t, 1. 1; IT
't 0 tg 1, If .
00
49 0 0600
0 0 00
0 0 0 0 *1: a 0 0 66090900: 100064000006000009,
0 0 0 000 _: 0 000_00 00000000600,
: I
cn-
etal 1,117.- j!jetal.Ljj.;
-(Lop-
t er
0 D 0 i@k
4rub@mg._70@`t Metallu-r- Amdemy tit Nclotttw, of tho
gy.
U.S.S.R., Moscow. 111-53. M& anical Pr M
ell
t
PX
MhAg_' ".4 ^tr@4" IT
Y, "nPrehennivo favestigation. 0'. tile tnWhanle:41
givon 0 a cc
-41, low-allay
properties of, @3'7' C
a,". Cb
.0-048% 8, 0;0"-90% Cr, Ni, OWO@4
0- 013-0 - 018-,-' , N" 0 @OWOF_O; DGOIqv, If, Oi
02). The main conclusions drawn are; through alloying,
the
steel is actually less liable to brittlo, fracture, than the,
corresponding O.U. steel and has,a, higher yield Point,- the
ageing properties "d sensitivity to stress-coneentration in
cyclic loading remain relatively,poor. It is suggested that. by
uAng other measures in addition to alloying, the properties
of Bessomer;iteel can be improved still furtheryJavestigation
'dot Hardened
of Processes Occurring during thejOAIWdW
Steel. K. F. Starodubov. (442-45 Changes oo=rmg in
hardan" pering, mainly at 300-5500 C, am
I eZI steer uring tem
d"eribed aud oposeL Primam Strnoture
of the-logot and its Effect oa, the Properties of Steel. A. P.'
Pronov. (4511-456). Unliko the finoly crystaffine Primary
r,)- of n'carboh stl@rl in got., a. dendriti c on6 is . cbardc-
struetu
tnri@;Oc Ofcorp:ct rc-;ulti in good-
)otlj at high,and low temperaturt*:.@
proix
t ure formed have
Factori &overning the type of priwan, strue
b@,en partially Main Questions in the Rail Problem.
T]w
PinLIal'ovieh. problom of rail quafit@
azi it haa lp.@!n dealt with in the L%8.8.11. is reviewed and the r
main filetfirs involved nre. discus'ed,=_ @__'
Y
STARODUB F.
On the origin of Dmascue steal patterns. Tructr po ist. tekh.
no.5:30-38 154. (IMU 8: 1)
(Damasconing)
USSR/Transformation in Solid Bodies. E-6
Abs Jour Referat Zhur - Fizika, No 5, 1957, 11766
Author Starodubov, K.F., Kossaya, I.I.
Inst
Title @n the Role -of--M-I-es During the Process of Aging of Steel
Orig Pub : Nauch. tr. Dnepropetr. metallurg. in-ta, 1955, vyp- 33,
332-344
Abstract : No abstract.
STAROD@U@BOV,redaktor; SAMOKHVALOV, Ye.A.redaktor izdatelletva;
0 JJTSV3,1
0 JJTSVEYG, Ye.N., tekhaicheakiy redaktor
[Heat treatment of seamless-rolled railroad car wheels]
Termicheskaia obrabotka zhelezaoaorozhnykh tsellnokatanykh
koles. Pod red. K.Y. Starodubova. Kiev. 1956. 1?9 p. WaA 10:10
1. Akademiya nauk URSR, Kiev, Instytut chernoy metalurgii.
2. Chlen-korrespondent AN USSR (for Starodubov)
War wheels)
STARODUBOV, X.F.; CEEWYAVSKAYA, S. G.
Changing the corrosion resistance of hardened steel during tempering*
Dop. UIW UIM no.2-.140-143 1560' WRA 9:12)
1. Chlon-korrespondent Akademii nauk USSR (for Staroaubov).2.1natitut
chornoi metalurgii Akademii nauk URSR (for Starodubov and Chernyav-
skaya). (Steel-Corrosion)
137-58-5-10014
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 5. p 161 (USSR)
AUTHOR: -Starodubov, K. F.
TITLE: Improving the Resistance to Wear and the Strength of Parts by
Heat Treatment (Povysheniye iznosoustoychivosti i prochnosti
detaley oborudovaniya putem termicheskoy obrabotki)
PERIODICAL: Tr. Nauchno-tekhn.o-va chernoy metallurgii. Ukr. resp.
pravl. 1956, Vol 3, pp 19-23
ABSTRACT: Until recently, most investigators plotted the change occurr-
ing in the mechanical properties of carbon steel and of many al-
loy steels against the tempering (T) temperature in the form of
smooth curves. Tensile and ak testing of Bessemer rail steel of
the following percentage content: C 0.58, Mn 0.70, Si 0.20,
S 0.032, and P 0.057, showed that after quenching and T a sharp
diminution in If and a noticeable reduction in S occurred in
the 450-5501C interval in this steel, while there was a very slow
rise in ak to 6000. Identical results were obtained by experi-
ments with two other melts of analogous chemical composition.
Tensile and a tests of spring steel 60S2, containing (in '16)
Card 1/3 C 0.61, Si 11, Mn 0.68, S 0.027, Cr 0.06, Ni 0.05, revealed
137-58-5-10014
Improving the Resistance (cont.
a sharp dip in the curve and a very slow rise in the E and ak curves. The
results were reproduced in their entirety in the testing of four other melts of
55S2 steel. Determination of the properties was performed after T at 25-500
intervals. X-ray analysis showed that the impairment of the plastic proper-
ties of the St is induced by breakdown of the ferrite blocks, This breakdown
occurs on separation of the carbides from the ferrite, which starts at 4000.
The impairment of plastic qualities had not been observed previously because
the majority of investigators had determined the changes in properties on T
at 100-hour intervals, with the result thbt this effect, which appears between
400 and 500', escaped observation. A new technical process for the heat
treatment of wheels is suggested. This process consists of 50-cps induction
heating of the wheel rim with hardening to a depth of 60 mm. and cooling in a
special quenching machine. In the course of the hardening process, the wheel
is rotated in the vertical plane and the lower portion of the rim is immersed
to a depth of 60 mm in a quenching tank containing running water. Wheels are
T at 450-5000 instead of 550-6000. Advantages of the process are a' saving of
heat, reduction in heating time from 2-3 hours to 6-8 min, consistency of
heat-treatment results, superior mechanical properties, simplicity of equip-
ment, and the possibility of working it into the production process flow. The
attention of metallurgical plant personnel is drawn to the need for wide
Card 2/3
137-58-5-10014
Improving the Resistance (cont.
dissemination of the process of gas carburizing, gas cyaniding, and needling
of steel.
F.N.
1. S-teels--Mechanical properties 2. Steels--Heat treatment
control
3. Steel--Quality
Ca rd 3/3
KE Pr 6/ @ -1'e
USSR/Transformation in Solid Bodies. E-6
Abs Jour : Referat Zhur - Fizika, No 5, 1957, li765
Author : Starodubov, K.F., Chernyavslka, S.G.
Inst : Institute of Ferrous Metallurgy, Academy of Sciences,
Ukrainian SSR.
Title : Change in the Dispersion of Carbides During the Tempering
of Quenched Steel.
Orig Pub : Dopovidi AN URSR, 1956, No 3, 259-262
Abstract : Using a photocolorimetric procedure, developed by the au-
thors, a study is made of the change in the degree of dis-
persion of the carbides as a function of the tempering
time of quenched steel. A horizontal section in the inter-
val from 275 to 4250 and a steeply rising section in the
interval of 425 -- 5250 were established on the curves
that shov.the dependence of the changs- in the intensity of
Card 1/2
WsFt/TransfOrMtion in Solid Bodies. E-6
Abs Jour Referat Zhur - Fizika, No 5, -057, 11765
the color of solutions Of shavings of the specimens in
nitric acid on the tempering temperature. To explain the
noticed effect, considerations are employed concerning
the speed of diffusion during the process of carbon coa-
gulation.
SOV/137-59- 1- 1821
Translation from: Referativnyy zhurnal. Metallurgiya, 1959, Nr 1, p 241 (USSR)
AUTHOR: Starodubov, K. F.
TITLE@. Induction Heating for Heat Treatment of Products of the Metallurgical
Industry (Primeneniye induktsionnogo nagreva dlya teri-nicheskoy
obrabotki izdeliy metallurgicheskov promyshlennosti)
PERIODICAL: V sb.: Prom. primeneniye tokov vysokoy chastoty. Riga, 1957..
pp 47-55
ABSTRACT; A description of separate examples of induction heating (IH). Harden-
ing and self-tempering of seamless -rolled railway-car wheels (W)
using residual heat left after the rolling operation. The author pro-
poses a procedure which would double the service life of W. After
being roll-forged the W is cooled to Arl temperature, then heated in
a furnace to Ac3, whereupon the rim of the W is water-cooled. This
ensures recrystallization and improves the metal structure. After
the final machining W is induction-heated with industrial -frequency
current. The W rim is heated to a depth of 60 mm in 6 min; the
heating is done by a five-coil inductor with a magnetic circuit using
Card 1/2 60 kwh. A small portion of the .-@volving W is immersed in water.
SOV/137-59-1-1821
Tr .1-iction Heating for Heat Treatment of Products of the Metallurgical Industry
The austenite breaks down into troostite with lamellar carbides which are more
wear-resistant than the spheroidal ones. The W is then tempered at 5000C_ An
automatic machine which works according to the above procedure is built for heat
treating 40, 000 W a year. For production of two-flange W for bridge cranes the
author proposes a procedure ensuring a 25% economy of metal and better mechan-
ical properties. A rotating press-forged blank is heated by an arc inductor to
1200- 1250'. Rollers located at the ends of the inductors roll out the tread and the
flanges of the W. At 850-9000 a portion of the rotating W is quenched by immer-
sion in a water tank. In order to avoid decarburization rapid IH is recommended
for preheating before rolling. Heating of a 105x 105x 1000-mm. piece of ShKhl5
steel to 1130L, can be achieved in 120 sec with IH. Energy consumption is 282 kwh/
/ton. In the drawing of pipes (P) 80% of the time is consumed by repeated recrys-
tallization, annealing, and pickling. IH ensures rapid annealing and affords a 5076
increase in the deformation of P in each drawing pass. Normalization of electro-
welded P improves their properties. Use of IH in normalizing makes possible
inclusion of that operation into the flow sheet. A single-coil inductor heats a P
6-8 m long and 50-70 mm in diameter with walls 2.5 - 3.5 mm thick at a speed of
1.4 meter/min. Energy consumption is 240-550 kwh/ton.
G. Z.
Card 2/2
137-58-2-3437
611y
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 2, p 166 (USSR)
AUTHORS, Starodubov, K. F. , Uzlov, 1. G.
TITLE: Heat Hardening of the Rolling Surfaces of 'Wheels (Termicheskoye
uprochneniye poverkhnosti kataniya kolesnykh par)
PERIODICAL: Ve5tn. Vses. n.-i. in-ta zh.-d. transp. , 1957, Nr 5, pp 39-41
ABSTRACT: The Institute of Iron and Steel Metallurgy of the Academy of
Sciences of the Ukrainian Soviet Socialist Republic and the
Dnepropetrovsk Iron and Steel Mill im. Karl Liebknecht have
developed and put into operation a process of heat hardening of
the rolling surface of wheels (W) consisting of induction heating
of the W rim to the hardening temperature, followed by hardening
and tempering. Heating was performed by an induction coil in
the form of a 5-turn annular solenoid, the inside diameter of
which equaled the outside diameter of the W. Heating was run
for 4-6 min until the temperature at the rolling surface attained
about 9000C. When heating was completed, the inductors were
removed, the rate of rotation-of the W was increased to 80 rpm,
and hardening tanks were brought up beneath the W. Hardening
Card 1/2 lasted for 120-150 sec, after which tempering followed. An
137-58-2-3437
Heat Hardening of the Rolling Surfaces of Wheels
investigation of the microstructure of the W rim after heat treatment revealed
finely dispersed pearlite with lamellar carbide throughout its cross section.
Hardness at the rolling surface (at 10 mm depth) was H B 318 and at 25 mm
depth it was HB 295, adequate to provide high wear resistance to W and ele-
vated resistance to crumbling-out due to fatigue. Not only the rolling surface
of the rim was subjected to hardening, but its side edges as well, and this
created a strengthened layer in the zones adjacent to the side edges which
during service of the W would prevent formation of beads. Hardening of the
W with intermittent immersion of the rim in water assures very low residual
stresses, as awheel rotating in the vertical plane is immersed in the water
during hardening for 1/5 of the length of the rim, and 4/5 is in the air.
Drawings and a brief description of the installation are provided.
A. M.
1. Metals-Hardening 2. Wheels-Rin hardening
Card 212
AUTHORS:j4ApTqq,ubov, K. F. and Kolesnik, B. P. 126-5-3-9/31
TITIj,-': X-ray Structure Studies on Metals after Electro-spark
Working (Rentgenostrukturnoye issledovaniye metallov
posle elektroiskrovoy obrabotki)
PERIODICAL: Fizika Metallov i Metallovedeniye, 1957, Vol V, Nr 3,
pp 434-441 (USSR)
ABSTRACT: Data are given on the phase composition and micro-
hardnesses of more than 100 combinations of V. Mn. Zr
and Nb with graphite, Al, Fe, Ni, Cu, Zn, Cd, Sn. Pb and
Bi after electro-spark workin The standard Lazarenko
electro-spark hexdener (Ref.151was used, and the surface
layers were studied with chromium radiation in a 114.6 mm
diameter X-ray camera. The hardness tests were done at
20 g loads on a FMT-3 unit. Table 1 (pp 436-7) gives
the worked metal (left column) against electrode metal
(top line); the data are the phases found, the Greek
letters being solid soluti6ns and the stars denoting
supersaturated solutions; the + sign means that a
mechanical mixture of the electrode ail base metals is
formed. Table 2 (microhardness, ks/mm ) is laid out in
Card 1/3 the same way, except that the second column on the left
126-1,-3-9/31
X-ray Structure St-adies on Metals after Electro-spark orking
is the microhardness before working. The results are
similar to those founT-for other combination. The obtained
results indicate that the investigated combinations inter-
act during electro-spark hardening in the same way as
combinations of other elements investigated earlier by
Palatnik (Ref.2). The DOlarity of the electrodes do not
influence the direction of transfer of the material,
which is determined by the thermal constants and to a
lesser extent by the shape of the electrodes. If layers
of "coating" are formed on the cathode from an anode
material which does not interact YT1th the cathode material,
the adhesion of the coating will always be strong. In most
cases oxides are produced. It was found that more oxides
are formed from the anode than from the cathode which is,
attributed to the pointed shape of the anode and is also
considered as being a confirmation of the thermal
character of the processes between the elect/rodes.
Nitrogen containing phases of compounds could not be
detected in the surface layer for any of the investigated
combinations of elements.
Card 2/3 There are two tables and 9 referenceS7 all of which are
Soviet.
126-5-3-9/31
X-ray Structure Studies on Metals after Electro-spark Working
ASSOCIATION: Institut chernoy metallurgii AN Ukr. SSR
(Institute of Ferrous Metallurgy, Ac.Sc., Ukr. SSR)
SUBMITTED: June 4, 1956
1. Metals--Structural analysis 2. Metals--Surface.properties
: 3. X-ray diffraction analysis 4. Sparks--Metallurgical effects
Card 3/3
ST@RODUDOV, K. F.
129-10-12/12
AUTHOR: Pogodin-AlelkcsseyevG.I., Starodubov, K.F. and Assonov, A.D.
TITLE: Scientific and -"U-echnical conference on heat treatment of
metals in Leipzig, East Germany. (Nauchino-tekhnicheskaya
konferentsiya po termicheskoy obrabotke metallov v
leyptsige)
PERIODIC,@.L: "Meta llove de ni-ye i Obrabotka Metallov" (Metallurgy ami
Metal Treatment), 1957, No.10, pp-53-63 (U.S.S.R.)
ABSTRACT: 'This conference was held between May 21 and 22, 1957.
Over 600 people participated, including some foreign delegates.
The conference papers can be classified into 4 groups dealing
with heat treatment, induction heating during hardening and
Sas hardening, heat treatment of components of various grades
of steel and theoretical problems of heat treatment.
Summaries a--i--e given of some of the papers read by East German
as well as by guest delegates.
There are 16 figares and graphs and 5 tables.
AVAIIABLE: IAbrary of Congress
Card 1/1
32-10-27/32
AUTHOR: Starodubov, X. F. , laember of the JAIS 17krainian SSR
TITLE: Comments
PERIODICAL:
41
lavodskaya Laboratoriya, 1957, Vol 23, Nr 10, PP- 1244
(USSR)
ABSTRACT: In his report delivered on the occasion ol' t1r- @Oth anriversary
of the October revolution, the author i;ives a general view on tfie
most important achievements of Soviet science in recent times. One.
of the most important achievements, the author states, are the
scientific studies in the fields of investigation of metals and
alloys in the details of the conversion of phases. The most im-
portart results for both sciences and for engineerin6 are those of
the separation-processes of the carbide phase, which were obtained
by means of spectroscopic analysis. The research work on inner
frictions, the application of radioactive indicators and works with
electron microscopes may be considered to be of equal importance.
The thermokinetic diagrams obtained by the decay of austenite under
the conditions of continuous coolina down at.various velocities
find application in practice. Soviet manufacture of apparatus has
substantielly contributed to the investigation of the conversion
Card 112 of phases, viz. by the buil_.Aing of the followirg equipmentst For
32-10-27/32
Caments
the analysis of X-ray structure "URS-50-Ill and "URS-2,5-1" with
registration of the ionization oi incei;zjity ol: disperse rays.
Torsional - pendulum -neter for measurinG inner frictions, mag-
notometers for the investiCation of both rapid ard slow conver-
sions in ferromagnetic materials, and finally: - the universal
electron microscope "Y:)M-100". The next important tasks in the
investigation of the conversion of phases, the author states, will
be further development of the method for the application of radio-
active indicators, studies by using electron microscopes, further
development of thermical methods, edition of an atlas of diagrams
of isothermic conversions of austenite and thern-okinetic diagrams,
at@ viell as thQ increase in production of apparatus for phrsical
investiZation of metals.
ASSOCIATION: Akademiya nauk USSR (Acadmw of Sciences Ukr SSR)
AVAILABLE: Library of Congress
1. Science-USSR-Progress 2. Electron microscopes-Application
Card 2/2
SVMHNIKOV, V.H., akademik;_IT akademik; DYMOV, A.M., prof.;
YRLIYANOT, A.A.; CMNIXHOT, Tu.A., prof.; SHCHAPOT. N.P., prof.;
BLAMM, X.Te.. prof.
Isv Samd1ovich Dlugach; obituary. Zav. lab. 23 no.12:1527-1528 '57.
1. AN USSR (for Svechnikov, Starodubov). (KIRA 11:2)
(Dlugach, Iev Samuilovicht 1887-1957)
o a,,-
W
vo
a 0.4
oo
04 V. A. vv ;I o. S
P Jj
so q r R
Vs..
1 0 -1"0 0
galls
"a
o
to". OVae., a --4
a a
M-i"Moo I
20
W I
h gh I- Np. 414-11 .4
.g,i 33 Mill
a -
40-013.3
a
Ail j
u 1. Villas,
Is
52
it-
it 31
if
a
.3
i4i
lei
Is
J1 -V
1\2 .
so
-: - @ I
Saa
M 1
V 3 M
11 0
H, 13 -
7.
1
. z
M I
A
SOV/137-58-9-19009
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 9, p 124 (USSR)
AUTHORS: Starodubov, K.F., Tregubenko, A.F., Yudovich, S.Z.,
KoIii-s-n1R-,'-r.T ',- Lobarev, M.I.
TITLE: Combatting Decarburization by Induction Heating of Alloy-steel
Billets Before Rolling (Primeneniye induktsionnogo nagreva
zagotovok legirovannoy stali pered prokatkoy v tselyakh bor'by
s obezuglerozhivaniyem)
PERIODICAL: V sb. Metallovedeniye i term. obrabotka. Moscow, Metallur-
gizdat, 1958, pp 39-49
ABSTRACT: A description is offered of experiments in induction heating
in advance of rolling without decarburization of the billets
(105x105x1000 mm) made of 60S2A, ShKh15 and U12A steels. It
is established that two-frequency heating (50 cps up to the ._
Curie rn;.;Lgnetic -transformation point and then 500 cps) is op1j.-
mal. Because the plant lacked a 500-cycle motor-generator:w@
set, induction heating was performed only at 50 cps, the cur-
rent being taken from a 15,000-kva transformer. The design of
the inductor is described. The drawings show the changes in
Card 1/2 electrical parameters and temperature in accordance with
SOV/ 137-58-9-19009
Combatting Decarburization by Induction Heating of Alloy-steel (cont.)
heating time. The time required to heat the billet to 10800C for rolling was
170 seconds in the case of 60SZA; 250 seconds were required to heat
ShKhl5 steel to 11500. Under these conditions, the temperature drop across
the section of the billet came to 200 and 1200, respectively, with 188 and
282 kwh/t of electrical energy consumed. Metallographic investigation
showed decarburization and oxidation on the surface of the billet to be lack-
ing. The structure of the ShKhl5 steel did not change, but grain growth - oc-
curred in the 60SZA steel (by Z or 3 points). A design is being developed for
industrial application of induction heating under which the billets will be
heated to 700-BQOO in gas furnaces and the rest of the way by 2500-cycle
high- f requ enc y,'cu'rrent.
F. U.
1. Induction generators--Design 2. Induction generators--PerfOrmance
3. Steel--Induction heating
Card 212
.AUTHM Starodubov, K.F. SOV/163--58-1-50/53
TITLE: On the Nature of the Processes Occundmg in the Tempering of
Hardened Steel Within the Temperature Range of 350 to 5500
(0 prirode protsessov, protekayushchikh pri otpuske zakelennoy
--steli v intervale-temperatur 350 - 5500)
PERIODICAL: Nauchnyye doklady vysshey shkoly. Metallurgiya, 1958, Nr 1,
pp 266 - 268 (USSR)
ABSTRACT: The factors influencing the change in the properties of steel in
its tempering as-well as the natuie of the tempering process in
the production of steel-were discussed. To determine -the nature
of the-tempering of atee-l,alloy-s within the -temperature--range of
350 to 5500 radiographic investigations-were carried out. The
radiographic investigations were carried out with samples of dis-
torted lattice of second type and the o(7phase, of the hardened
iron alloys. 0
Within the temperature range of 400 to 500 the sample divides
into small pieces. This division in the phase is discussed and
is explained as follows:
At a temperature of 4000 C the carbide particles increase very
Card 1/2 rapidly and thereby the tension in the alloy increases. On this
On the Nature of the Processes OccLning in the Tempering SOV/163-58-1-50/53
of Hardened Steel Within the Temperature Range of
350 to 5500
occasion also the binding between the solid die ( OC-phase) and
the carbide crystals is disturbed. A further increase in the
cC--phase with the increase in the tempering temperature is caus-
ed by the increase in the diffusion process. The division of the
0(-phase is probably also dependent on the plastic displacement
of the boundary layer between the ferrite and carbide phases,
There are 3 figures and 10 references, 10 of which are Soviet@
ASSOCIATION: Dnepropetrovskiy metallurgicheskiy institut (Dnepropetrovsk
Metallurgical Institute)
SUBMITTED: October 1, 1957
Card 2/2
SOV/137-58-10-21510
Translation from: Referativnyy zhurnal, Metallurgiya, 1958, Nr 10, p 149 (USSR)
AUTHORS: Starodubov, K. F.,-, Babich, V. K.
T IT LE: On the Nature of Processes Occurring in the Third Stage of
Tempering (0 prirode protsessov, protekayushchikh v Lret' yey
stadii otpuska)
PERIODICAL: Izv. vyssh. uchebn. zavedeniy. Chernaya metallurgiya,
1958, Nr 2, pp 133-14Z
ABSTRACT: The process of tempering of hardened cold-worked steel
containing 700/6 C was studied together with the process of
tempering of technically pure commercial iron (0. 090/0 C).
Deformation of the steel was accomplished by means of
drawing. After quench-hardening or deformation, the speci- 0
mens were tempered at temperatures ranging from 20 to 675 C.
Type II distortions were determined together with the dimen-
sions of blocks, the 0-b and 6 values, and the magnitude of
coercive force. It was established that the 6 of tempered
steel is reduced and the (rb slightly increased after the steel
had been tempered at a temperature of 375-4750. It is
Card 1/2 assumed that the increase in tensile strength is attributable
SOV/137-58-10-21510
On the Nature of Processes Occurring in the Third Stage of Tempering
to the following factors: a) Disintegration of a -phase blocks during disrtp-
tion of cohesion in lattices of carbide and a phase; b) relief of elastic
stresses through secondary plastic slips; c) occurrence of an initial
recrystallization stage during processing of the solid a solution. In order
to exclude the effect of cohesion in the carbide and a -phase lattices, the
process of tempering of a cold-worked steel wire was studied. It is estab-
lished that the elastic stresses occurring during annealing may be relieved
by the action of secondary plastic slips under conditions of increased plas-
ticity at elevated temperatures. The coercive force is determined from the
magnitude of the blocks and is but slightly dependent on the elastic distor-
tions of the crystal lattice.
1. Steel--Phase studies 2. Steel--Deformation
treatment 4. Steel--Mechani-cal properti-es
3. Steel--Heat Ye. S
Card 2/2
SOV/21-58-2-5/28
AUTHORS: Starodubov,__X-Y,,_Member of the AS UkrSSR, and Polyakov9S.N,1
TITLE: Solubility of Carbon in Alpha Iron Alloyed by Manganese and
Molybdenum and the Kinetics of Carbon Segregation from the
Solution (Rastvorimost, ugleroda v 0( -zheleze, legirovannom
margantsem i malibdenom, i kinetika vydeleniya, ugleroda iz
rastvora)
PERIODICAL: Dopovidi Akademii nauk Ukrains1koi R$R, 1958, Nr 2,
PP 135-138 (USSR)
ABSTRACT: The authors studied the behavior of carbon in alpha iron
alloyed by 0.75 % manganese and 0-40% molybdenum by the
method of internal friction. The presence of these admixt-
ures lowered the solubility of carbon inalpha, iron. Ifq
however, manganese alone is present to the amount of 005%,
the relative quantity of segregated carbides is three times
as great as in pure iron. In the case of the presence of
O-4OR Mo, the relative quantity of the segregated phase is,
the same as in pure iron. The authors also studied the ki-
netics of the segregation process and established that man-
ganese delays considerably its beginning, whereas molybde-
num hardly changes its kinetics as compared with the case
C ard 1/2 of Dure iron. While investigating iron alloyed by moly'b-,
SOV/21-58-2-5/20
Solubility of Carbon in Alpha Iron Alloyed by Manganese and Molybdenum
and the Kinetics of Carbon Segregation from the Solution
denam it was found that on tempering at about 550 - 650 oc
a very stable carbide is formed, and tne solubility of car-
bon in alpha iron almost vanishes. On the basis of the re-
sults obtained, the effect of manganese and molybdenum on
the manifestation of reversible high-temperature tempering
brittleness is explained. There are 3 graphs, 1 table and
9 references 6 of which are Soviet, 2 English and 1 Japanese.
ASSOCIATION: Institut che"rnoy metallurgii AN UkrSSR (Institute of Fer-
rous Metallurgy of the AS UkrSSR)
SUBMITTED; May 6, 1957
NOTE: Russian title and Russian names of individuals and institu-
tions appearing in this article have been used in the trans-
literation.
sTARoDuBov, K.P., akad.; POLYAKOV, S.N., inzh.
Temper brittleness in carbon steel. Izve vyse ucheba gav.; cherno
met. no.3:131-144 Mr 158. (MIRA 11:5)
I.Dnepropetrovokly metallurgicheskly institut.
(Steel--Brittleness)
AUTHORS: Starodubov, K. F.
Tylkin, M. A. SOV/163-58-3-40/49
,
------------------------
TITLE: The Effect of the Hardening Temperature on the Change cf the
Propezties of Steele In Tempering (Vliyaniye temperatury zakalki
na izmenieniyi, evoystv stali pri otpuske)
PERIODICAL: Nauchnyys doklady -uryeshey shkoly, Metallurgiya, 1958, Nr 3,
pp 242-244 (USSR)
ABSTRACT: The effect of the hardening temperature on the change of the
properties of the-steel in tempering was investigated. A steel
sample of the type U12A with 1,12% C was used for this investi-
gation.
The results of the mechanical investigations and the determi-
-nation of the coercive force of the steel hardened at tempera-
tures below 6500 were compared to the results obtained with
steel samples hardened above 9200. In samples hardened at temper-
atures abo-,re 9200 C in the curve of the coercive force a minimum
may be found. In steel samples hardened below 6500C, i.e. in,
Zamples in which there db not occur a separation of the carbide
phases from the a-solution and a destruction of the a-phase
neither a decrease of the plastic properties nor an increase of
Card 1/2 the coerai-7,e forces was found.
SOV/163-58-3-40/49
The Effect of the Hardening Temperature on the Change of the Properties of
Steels in Tempering
ASSOCIATION:
SUBIJITTED:
The results obtained agree with the present concepts on the
causes of the decrease of the plastic properties and the in-
crease of the coercive force.
There are -1, figure and 5 references, ?rhich are Soviet.
Dn;;prcpetr._-)-rskiy metallurgif,-heskiy institut (Dnepropetrovsk
M-_tallurgical Institute)
1195"1
Card 2/2
,AUTHORS: Star..--dub,.,,.- K. F.; Tylkin, M. A. SOV/163-58-3-41/49
TITLE: The Effec;t of a Low Temperature Cooling of Steels Prior to
Hardening i-in the Change of the Mechanical Properties of the
Steel at an "Average" Tempering (Vliyaniye glubokogo okhlazhde-
niya stall posle zakalk! na izmeneniye yeye mekhanicheskikh
svoys@.v pri 11sradnem" ctpuske)
PERIODICAL: Nauchnyy-3 doklady -vysshey shkoly. Metallurgiya, 1958, Nr 3,
pp 245-247 (USSR)
ABSTRACT: The effect of the residual austenite and the additional stresses
on the change of the properties of hardened steels in tempering
was investigated within the temperature range of 350-6500; be-
sides,a lower cooling of the steel sample U12A with 1,1 e. C was
carried out.
The change of the mechanical and physical properties was proved
by means of the determination of the hardness and the coercive
f or -c e.
The -.,hange of the hardness2 the impact viscosity and the coercive
force of the samples in the tempering after hardening was in-
,iest2igated.
Card The f4gures 1, 2, 3 and 4 show that on the curves of the specific
SOV/1 63-58-3-41/49
The Effect of a Low Temperature Cooling of Steels Prior to Hardening on the
Change of the Mechani.--aj. Properties of the Steel at an "Average" Tempering
hardness the impact viscosity has a minimum, whereas a maximum
is formed on the curve of -the coercive force.
In the -,ooling of the steel samples in liquid oxygen an in-
signif:'Loan'; increase cf the strength as well as a corresponding
de-rease r-f 4-h@
L. - properties of the impact viscosity
Occurs. After the thermal treatment of the steel samples the
absolute valups of the strength, the plastic properties and the
impa.A 7is-,Dslty differ only little.
The great d@;formaticn :in the crystal lattice of the steel sample
in the -.aC.
,01.-!ng
@j 1-01_14 d oxygen also influences the diffusion
processes. The -insignificant change of the plastic properties
in deeper @;@-cling as compared to the tempering immediately after
hardening is ex.plained by the increase of stresses in the steel
sampie.
There aTe 4 figuTes and 3 references, which are Soviet.
t
ASSOCIATION: Dnepropetr@-,r3k-Ly metallurgi.--heskiy institut (Dnepropetrovsk
SUEMITMD- OCt-iber 1@ 2-957
Card 2/2
I
@ 8 ( 7 IN
AUTHORS: Sta:@-odubov, K. F., Tylkin, M. A.- SOV/163-58-4@-41/47
TITLE: Change in the Properties of Normalized Steel in Tempering
(Izmeneniye s-vivatv normalizovamnoy stali pri otpuske)
L
PERIODICAL: Nalachnyye dol-lady vysshey shkoly. Metallurgiya, '1958, Nr 4,
pp 232-235 (USSR)
ABSTRACT: The influence of tempering temperature on the properties of
rormalilzed steel was investigated here. These properties are
compared with those obtained after quenching and tempering.
A Bessemer rail steel of two melts was .nvestigated ( 0.58 -
0.1@@09/- C, 0.87 - 0-93@lo Mn). The experim;nts showed that in rail
steel airccoled from a temDerature above A3 the effect of
reduction of plastic-properties, which is present at the
t-empering of a hardened steel, is missing. In this case, the
properties change monotonously at all tempering temperatures
invest-f-gated. Tempering of the normalized steel reduces its
prcpert--*es very slightly. Due to the normalization, lamellar
'extures of the perlite type are immediately formed. The
stru--tural state of the -normalized steel remains almost
Card /2 unchanged in tempering. Elongation tests show that the
Change J.r@ the Prr.perties of Normalized Steel in sov/163-58-4-41/47
Temperine
stretch4ng - even after tempering at 550-5750 - is much greater
Ln, a previous,,-y normalized steel than in a previously hardened
steel. There are 4 figures and 3 Soviet references.
ASSOCIATION: Drepropetrovskily metallurgicheskiy institut
,Dne prope @ZOV3k Inst-tute c' Metallurgy)
S UBMITTED: 03tober '19 -1957
Card 2 /2'
I
18(7)
AUTHORS: S- F., Sazor-ova, A. A. SOV/163-56-4-42/47
TITLE: influer-ne of the Method of Heat Treatment on the Damping
(Vibration) Toughness of Silicon Spring Steel (Vliyaniye rezhima
termcobrabDtki na ts-4klicheskuyu (vibratsionnuyu) vyazkost'
kremn--*st,-,y pruzhinnoy sta-li)
PERIODICAL; Nauchnyye doklady vysshey shkoly. Metallurgiya, 1958, Nr 4,
pp 236-239 (USSR)
ABSTRACT: The rate of damping toughness of the spring steel 5532 was
by va-rious methods of heat treatment. The following
heat treatments were provided for obtaining final operation - I
properties: quenching with tempering at different temperatures,
or an isothermal austenite decomposition at temperatures above
the martensite point. The apparatus of the Feppl' - Perts
(Ref 2) type was used to investigate the processes taking place
'n the firal heat treatment. The investigation showed that the
mest convenient, heat treatment for springs is the quenching
with subsequent tempering in the range of 350-4500 in order to
influence ,f -."'-Ie Method of Heat Treatment on the SOV/163-58-4-42/47
Damp-ing (Vilbrat-47-7,-) T@:ug-hness of Silicon Spring Steel
obtain a high rate of damp-;n- toughness. There are 3 figures
0
ani 2 refere-rCes, I of which is Soviet.
ASSOCIATTON.- D@,a-oropetr;3vskiy metallurgicheskiy institut
(PnerrGp,:@t-@vsk Inst-A-ate z)f Metallurgy)
SUBMITTED- 0 b 0 19 57