SCIENTIFIC ABSTRACT SOLOMONOV, M. - SOLOMONOV, S.

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R001652220019-3
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: August 25, 2000
• Sequence Number: 19
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

-4-35/39
eroblem of Combined Utilisat-ion- of Fuel -it, National E,::cnom,7
for Generating Power and for T,@hnplogical
"'onference of Power Reaear@@h Eetablislmentc of the Ac.S--.USSR and
.,f the Individual Scviet Rlzpublllc@.;
proved of purilfyi@S ?11 by means of a cen-Gri-
fuge.
The Instit-ute kr Thurra'L Puw,@!.- @I' th,e Ac.Sr- Ukrainian SSR
has evolved equipment on vower-te-.-.-hrolcrical utilization
of Ukrainian brown coals, the installation of which is in
the'process of being completed. Tl,-,- --a-me, instit,--,te, joint.'Aly
with the Pcwer Inst-it-ai@e of th@, 3elor-,Zssian SSR,
evolved projt@-,tr, of an for p.,.@wer-te::-hn-olcgical
utilisation of millf,ng peat. TLa 1--stitute of Ch!-mistry
of the A,@.Sri. SSR, jcintly with the Pc@wer
Institute of the An-Sn. Estc=.P,)a SSR, devel*ped ani
tested on pi-lo-It-p1a.at las@i-Z.'@ eOAU1pMP-nt-' 'L,, i, i 1 t 1) Y the
"Il'marine',' a -reactr,-:, @if -;j new desigr., wixh a
wedge-shaped fcr therma). of uhale with
Card 11/12

SOV/24-58-4-35/39
Problem of Combined Utilisation of Fuel in the National Economy
for Generating Power and for Technological Purposes
Conference of Power Research Establishments of the Ac.Sc.USSR and
.)f the Individual Soviet Republics
a solid heat carrier inside a thin layer.
This is virtually a complete translation.
Card 12/12

AUTHOR: -4ai2E@@@ SOV/24-58-4-36/39
TITLE: Application of Tectnological Lubricants and Special
Coatings During Shiping of Metals by Applying Pres7,,jxa
(Primeneniye tekhnologicheskikh smazok 1 s t ' 11nYkh
pokrytiy pri otrabotke metallov davleniyem3e,sia
Conference at tiie Institute for Mechanical Eng-1neering
of the Ac.Sc. USSR (Soveshchaniye v Institute mashino--
vedeniya Akademii nauk SSSR)
PERIODICAL: Izvesti.ya Akademii Nauk SSSR, Otdeleniye Tekhnicheskikh
lqaukl, 1958, Nr 4, P 153 (USSR)
ABSTRACT: The conference was held in December, 1957. The following
papers were read: "General Relations and the Mechanism of
Operation of Lubricants During Shaping of Metals by
Applying Pressure" by V.I. Likhtman, S.Ya. Veyler
(Institut fizicheskoy khimii AN SSSR - Institute of
Physical Chemistry of the Ac.Sc.USSR); "Applicati.--n of
Principles of the Hydrodynamic Theory to the Prc,@ess of
Cold Stamping" by Ye.I. Isachenkov (NIAT); 'New Stamping
Lubricants for Deep and Particularly for Veri Dee-
Drawing of Components made of Sheet Steeln by M.A.
Sil'tsova (Gorlkovskiy avto--avod - Gorlkiy Automcb-41e
Works); "Lubricants for Stamping Sheet of Steel and of
Cardl/4 Various Alloys" by Yu.P. Davydov (VIAM);

SOV/24-58-4-36/39
Application of Technolcgical Lubricants and Special Coatings
During Shaping of Metals by Applying Pressure
Conference at the Institute kr Me--hanical Engineering of the
Ac.Sc.USSR
"New Lubricants for Wire Drawing" by A.G. Smirncva
(TSNIICbERMET); "Investigation of Technological
Lubricants App 'lied for Hot Stamping of Metal Components"
by S.AV Doinar (Minskiy politekhnicheskiy institut im.
I.Y. Stalina - Llinsk Folytechnical Institute imeni
I-V. Stalin); "Investigation and Testing of Certain
Technological Lubricants and Methods of Applying these
on the Dias of Presses DtLring Hot Stamping of Aluminium
Alloys" by E.R. Shor (TsNIITMASh); "Lubricants Used in
Shaping of 1,etal by Pressure" by Ye.B. Zharavskiy
(Aviatsionnyy za-,rod -,. Aviation Works). The data
given in the indi-ridual papers show the increasing use
of liquid, paste and solid technological lubricants
and special -1catings in highly efficient processes of
shaping metals by applying pressure in the production
of complicated components from various heavy and light
non-ferrous allrys. The undertakings of the chemical
Card2/4 and the oil industries have so far not organised the

SOV/24-58-4-36/39
Application of Technological Lubri@@ants and Special Coatings
During Shaping of Metals by Applying Pressure
Conference at the Instituta for Me,@.hani,:@al Engineering of the
Ac.Sc.USSR
production of the apprcpriate lubricants and the
instrument industry does not produce instruments for
determining the main parameters of these lubricants.
So far, investiga@,icns by individual institutes of the
Ac.Sc.USSR on tezAmclcgical lubricants have not been
carried o,-,t on a -:-,@).ffi,.,iently large scale and have not
been adequatal.7 :@c--cr-Unated. The same applies to
other instituzes.
S. Ya. Veyler (Inatitut fizic@heskoy khimi� AN SSSR -
Inelitute of Phys!7.al Chemistry of the Ac.S-.@.SSSR)
reported on work in the field of lubricants for cold
stamping. Since the result of this work is little known,
it was prcposed to devote to -it a specially convened
extended eeminar at the Institute of Mechanical Engineering
of the Ac-Sc.USSR-
Co-ordination wa6 arged of the research work in the use
card3/4 of lubricants fcr shaping of metals by pressure and this

SOV/24-58-4-36/39
Application of Technological Lubricants and Special Coatings
During Shaping of Metals by Applying Pressure
Conference at the Institute for Mechanical Engineering of the
Ac.Sc.USSR
task should be undertaken by the Laboratoriya. obrabotki
metallov davleniyem Instituta mashinovedeniya AN SSSR
(Laboratory for Shaping of Metals by Pressure of the
Institute of Mechanical Engineering of the Ac.Sc.USSR).
The importance was pointed out of putting onto the
market instruments for determining the -gin parameters
of lubricants and also of automatic'equipment for coating
dies with technological lubricants. It is necessary to
work out standard specifications for technological
lubricants and also recipes and methods of analysis of
such lubricants and to increase the manufacture by the
industry of standard technological lubricants. At
regular intervals, symposia should be published on
technological lubricants and special coatings used in
the shaping of metals by applying pressure.
Card 4/4

AUTHOR: _Solomonov, At.. SOV/24-58-4-38/39
TITLE: Combating Sudden Ejections of Coal and Gas From
Coal Mines (Borlba s vnezapnymi vybrosami uglya i gaza
v ugol'nykh shakhtakh)
(Conference at the Institute of Mining of the Ac.Sc.
USSR) (Soveshchani@e v Institute gornogo dela
Akademii nauk SAI
PERIODICAL: Izvestiya Akademii Sauk, SSSR, Otdeleniye Tekhnicheskikh
Sauk, 1958, Nr 4, PP 155 - 156 (USSR)
ABSTRACT; On February 17 - 21, a conference was held at the
Institut gornogDdela Akademii nauk SSSR (Mining Institute
of the Ac.Sc.UbSR) on the results and prospects of
research work on combating sudden ejections of coal and
gas and coal explosions in mines. Members of the Central
Commission for combating sudden ejections of coal and gas,
representatives of scientific research and project
institutes and of higher teaching establishments parti-
cipated in the conference. After a brief opening speech
by Academician A.A. Skochinskiy, the following papers were
read at the conference: "Investigation of the Conditions
Cardl/4 in the Field of Application of Local Methods of Preventing

SOV/24-58-4-38/39
Combating Sudden Ejections of Coal and Gas From Coal Mines.
Conference at the Institute of Mining of the Ac.Sc.USSR
Sudden Ejections of Coal an:d Gas in preparatory workings
and in drawing (V.V. Khodct); "Development of a
Combination of Measures for Safe Mining of Coal in Stopes
in Unprotected Zones of Seams Which are Dangerous From
the Point of View of Sudden Ejections of Coal and Gas"
(R.M. Krichevskiy); "Finding a Safe and Productive
System of Working Individual Steeply Sloping Seams Which
Have an Inclination to Develop Sudden Ejections of Coal
and Gas" (B.S. Lookshin); "Finding an Effective System
of Working Thin Seams for the Purpose of Utilising Them
as Protective Seams" (B.S. Lokshin); "System of Working
of the "Pugachevkall Mine of the im. Artem. Trust of
Dzerzhinskugoll (N.I. Zhivlov); "System of Working
1ndividual Seams of the Central Donbass region Where
There is a Danger of Sudden Ejections of Coal and Gas
(D.F. Borisov); "Safe and Effective Methods of Working
Coal Seams of the Yegorshinskiy deposits Which are
Dangerous From the Point of View of Sudden Ejections of
Coal and Gas" (D.F. Borisov); "Investigation of the
Card2/4 Tendency to Ejections of Coal of the Makhnevskiy anthracite

SOV/24-58-4-38/39
Combating Sudden Ejections of Coal and Gas From Coal Mines..
Conference at the Insitute of Mining of the ic. Sc. USSR
deposits and Justification of Rational Methods of
Mining This Coal (I.N. Sidorov); "Method of Detection
of Sections Which Are-Dangerous as Regards Sudden
Ejections in Seams of the Yegorshinskij mining region!'
(0.1. Chernov); "Development of Geophysical Methods
and Apparatus for Establishing and Studying the Fore-
runners of Sudden Ejections of Coal and Gas"(M.S. Antsy-
ferov); I'Result:u of Scientific lrivestigations on the
Problem of Comba-r,`_ng Shcck-; in Coal Mines During 1957"
(S.G. Avershin); ':On the State of Designing and Testing
Drilling Machines and Equipment for Passing Through
Galleries in Seams Wh-ich Are DarZerous From the Point of
View of Eje.:,tiors of Coal and G@,B" (K.B. Kogan).
On the basis of the presented papers and discussions,
the participants in the conference concluded that in
1957 progress was achieved i.n the theory of sudden
ejections of ccal and gas.
Card3/4

SOV/24-58-4-38/39
Combating Sudden Ejections of Coal and Gas from Coal Mines.
Conference at the Institute of Mining of the Ac.Sc.USSR
Some of the interesting items discussed at the
conference are briefly summarised.
Card 4/4

AUTHOR: Solomonov, M. SOV/24-58-4-39/39
TITLE: General Meeting of the Technical Sciences Section of
the Ac.Sc. USSR. Results of the Scientific and the
Scientific-organisational Activities of This Section
During 1957 (Obshcheye sobraniye Otdeleniya Tekhnicheskikh
nauk AN SSSR. Itogi nauchnoy i nauchno-orge-nizatsionnoy
deyatellnosti otdeleniya za 195*7 god)
PERIODICAL: Izvestiya Akademii Fauk SSSR, Otdeleniye Tekhnicheskikh
Nauk,, 1958, Nr 4.
. PP 157 - 160 (USSR)
ABSTRACT: This meeting was held on March 19, 1958 under the chair--
manship of Academician L.D. Shevyakov. During this
meeting, the secretary of the Technical Sciences Section,
Academici-an A.A. Blagonravov, presented a report on the
scientific and orgaDisational activities of the estab-
lishments of the Sa-ztion during 1957.
The Institut avtomatiki i telemekhaniki (Institute of
Automation and Telemechanics) solved the general problem
of determining an optirrum system for the case of the normal
distribution of the non-regular part of the useful signal
&nd the noise. The problem was solved of determining
Cardl/8

SOV/24-58-4-39/39
General Meeting of the Technical Sciences Section of the Ac.Sc.
USSR. Results of the Scientific and the Scientific-organisational
Activities of This Section During 1957.
periodic regimes in non-linear systems with a broken-
line characteristic. The same institute evolved a
scheme of a pneumatic extreme-value regulator with a
memory device intended for automation of new chemico-
technological processes. A self-adjusting system of
controlling electric grinding machines was evolved.
In the Institut elektromekhaniki (InstitUe of Blectro-
mechanics), a method was evolved of improving the
accuracy of the method of harmonic balance in investi-
gations of non-linear automatic-control systems. In
the same institute, theoretical foundations were
evolved and a circuit was applied of a simple digital
system for programming machining of components between
reference points of a profile.
The Institut mashinovedeniya (Institute of Mechanical
Engineering) produced a model of a milling machine with
programme control and an electronic model was produced
Card2/8 for investigating the dynamics of stepped systems of

SOV/24-58-4-39/39
General Meeting of the Technical Sciences Section of the Ac.Sc.
USSR. Results of the Scientific and the Scientific-organisational
Activities of This Section During 1957
programme control, Developments in other laboratories
were also mentioned by Blagonravov. In the Energeti-
cheskiy institut (Institute of Power), the conditions
were established which would ensure a most economic
utilisation of the electricity supply of the Urals from
power stations located near the fuel bases of Eastern
Siberia and Northern Kazakhstan. These power stations
are to be 'Linked with the long-distance power transmissbn
lines of Siberia and the European part of the Soviet
Union. It was found that under these conditions, it would
be economical to transmit power by DC. Investigations
were completed relating to the regimes of super-long-
distance power transmission lines of such parameters as
2 000 to 2 500 km with a loading UD to 1 500 MW/circuit
and methods of increasing th=4@lnpacityj the economy
and the reliability of such lines were investigated.
In the Institute of Mining, the basic material was
collected for the design and construction of the iron-ore
Card3/8 Yakvv1-,vr3k.'1y )f the Kursk magnetic anomaly, which is

SOV/24-58-4-39/39
General Meeting of the Teshnical Sciences Section of the Ac-Sc.
USSR. Results of the Scientific and the Scientific-organisational
Activities of This Section During 1957
to be the largest mine in the Soviet Union. The same
institute established the regime data for a process
of coking of Dcnets gas coal so as to obtain high-quality
metallurgic-al coke,. A method was derived of producing
coal concentrates enriched with germanium, gallium and
scandium. Furthermore, a new method was evolved of
obtaining zirconium and titanium concentrates by using
oxygen in the process of flotation.
IGI produced a technological gas which can be used for the
synthesis of ammonia. IMMh solved the problem of
ejection by gas of liquids from a porous medium and
thereby proved that it is possible to utilise underground
cavities for creating stable gas storage space.
In the Institut metallurgii (Instittite of Metallurgy), a
high-strength titanium alloy wasdeve;qced capable of
operating at temperatures up to 600 C. This institute
also evolved a technology of producing components made
of germanium of a small cross-section with a single-
Card4/8 crystal structure, During 1957, the individual institutes

SOV/24-58-4-39/39
General Meeting of the Teshnical Sciences Section of the Ac.Sc.
USSR. Results Of the Scientific and the Scientific-organisational
Activities of This Section During 1957
of the Te,-.hni'^-al Sciences Section of the Ac.Sc.USSR put
into use twelve major developments. The Institute of
Automation and Telemechanics introduced into industry new
instruments and -equipment, including contactless
instruments and meshanisms which are very reliable,
simple to produce and to operate. The Mining Institute
developed rational methods of preparing shallow seams
L
which are being used in thirty-three mines of the
Donbass region. A combined method of beneficiation of
oxided lead ores has passed industrial tests; this
method enables extracting from the ores lead oxide
minerals of a --omplax compositionwhich cannot be
achieved bj other methods. The Instit t qg Mining also
- , tfilkdse of which
introdu@;ed a new reagent, "Kubcvyy /0
resulted in an i=rease in the yield of concentrates
(at the Central Benefi--iation Works in Karaganda) by 25%
Card 5/8 and in a 3--,'r'l-fcld reduction in the reagent consumption.

SOV/24-58-4-39/39
General Meeting of the Te,@hni:a-' Ssiences Section of the Ac.Sc-
USSR. Results of the Ssientific and the Scientific-organisational
Activities of This Se.,Ition Duri--g 1957
The Instituta of Met"allurgy car-ried out a great deal of
work on introdusing va-.uum processes in metallurgy.
Vacuum treatment of alloy steell in two shops of the
flDneprospatsstalll Works brought about a doubling of the
production :-f better grades of transformer steel and a
halving of the rejeotz due to cracks in structural and
stainless steels. The im. Dzerzhinskiy Works have mastered
the process olp va,@u-jm treatmen@-, of bessemer steej.,,. as a
result cf which the, quality of bessemer, rimming and
rail steels ,-ery appreciably. The same
institute a be-lhnolcg:,, of desulphurising pig
iron outside the Kast furnace., which enables increasing
by 10-15% the produativity of blast furnaces with a
consequent, [e-mail] in the consumption of raw materials
and the prcd,,i,?tirn @,csts of pig iron. The Institute of
Metall,=g.7; 4oin-171y with VAMI, has intr6duced electric
smelting of b--1',q-uet-ted @=,Centrates from 1L.-shinskoye
Card6/8 produ-iing a titanium slag with over 85*
i@anium, cxtd,@ @(,--tent ard a relati-,rely low consumption

BOV/24-58-4-39/39
General Meeting of the Te-@hzii'(@al Scliences Se--tion cf the Ar,-sr,-
USSR. Results of ths S@ientifi:7; ar-d the Scientific-organisational
Activities of This SP.-'l-ion During 195?
of ele-:@tri@--ty. The surface-active substan-les of the
type RAS (ref4.ned alkylary! sulphonates) developed by
the Instit.-@@t r-aft-- "'Pet:rcdaum Institute) are to be
manufaztured in w!.-rk@ dc-,:?igrzd by Lengiprogaz. These
substan.,-es w'L-'i .=---bst-it-lita natural fats in the soap
industry w--.11. te aaed as fictation reagents for
of Lcr;--ferrous metals -and of hard
coal. A.A. alo-o mentioned some deficien.:ies
in the ws7-k -1f +-he indi--iduil. institutes. In partisular,
he point,@-d. out ,.hat, in a number of cases the progress
lags far behi,nd the A numb@r of meas-ares
are beir.g taken tkw.@) -'-n,.@ease printing capacity of the
Ac.S.:..USSR D,,[e-mail] whish is ai, present inadequate
for satisfyIng In the last part of his
address., he daa--,-t wf-@h pro!)lems. cf training 9.--ientific
personne, and mertior-ed the in,,-reasing links letween the
Card ?/8

SOV/24-58-4-39/39
General Meeting of the Technical Sciences Section of the Ac.Sc.
USSR. Results of the Scientific and the Scientific-organisational
Activities of This Section During 1957
establishments of the Technical Sciences Section of
the Pc,Sc. USSR and foreign establishments.
Corresponding Member of the Ac.Sc.USSR V.A. Kirillin,
Academician A.I. Berg, Corresponding Membeisof the Ac.Sc.
USSR B.K. Aleksandrov, A.V. Gorinov and N.A. Derevyanko
participated in the discussions following the report of
A.A. Blagonravov.
During the general meeting, Doctor of Technical Sciences
N.A. Chinakal presented a paper on the "shield" system of
working thick seams.
Card 8/8 USCCEM-DC-60.,701

AUTHOR: Solomon V 210V/24-58-5-30/31
@TITLO: Scientific-Method Conference on the Problem of
Breaking-up Rocks by Explosions (Pervoye nauchno-
metodicheskoye soveshchaniye po probleme drobleniya
gornykh porod vzryvom)
PERIODICAL: Izvestiya Akademii Nauk SSSR, Otdeleniye Tekhnicheskikh
Nauk, 1958, Nr 5, pp 143-144 (USSR)
ABSTRACT: On February 24-26, 1958 a conference was held on breaking-
up rocks by explosions at the Institute of Mining, Ac.Sc.,
USSR (Institut Gornogo Dela AN SSSR). 100 people from
32 towns participated and the participants included
representatives of Works, Research Institutes of the
Ac.Sc. from various parts of the Soviet Union '
departmental research institutes and of higher teaching
establishments. On general theoretical problems the
following papers were presented:
"On the problem of breaking-up rocks by explosions,
present state and tasks" by L. I. Baron, Institute of
Mining, Ac.Sc., USSR;
"On the dependence of the breaking-up on the total enerGy
Card 1/5 of the explosion" by A. F. Belyayev, Institute of

SOV/24-58-5-30/31
Scientific-Method Conference on the Problem of Breaking-up
Rocks by Explosions
Chemical Physics, Ac.Sc. USSR (Institut khimicheskoy
fiziki AN SSSR);
"On experimental methods of studyin6 the breaking-up of
solid bodies" by L. K. Belokurov, Institute of Chemical
Physics, Ac.Sc., USSR;
"On controllinE the energy of elastic waves in rocks
possessing a hi6h acoustic ribidity and ensuring yield
of fragments of a pre-deter,nined size" by A.N.Kbinukayev,
Leningrad MininG Institute (Leningradskiy Sornyy institut);
"On the technique of studying the character of breaking-up
of firm rocks by means of charges of increased length"
by V. I. Filippov, Institute of Mining, Ac.Sc.
Kazakhstan SSR;
"On investigating the fields of the potential and the
process of breaking-up, of rocks by explosions in the
case of instantaneous and briefly delayed charges in the
terraces of open-cast mining" by F. A. Beliyenko,
Dnepropetrovsk Mining Institute.
In the section relating to evaluation of the crushing
Card 2/5 propertks of explosives and the breakin6-up of rocks the

SOV/24-58-5-30/31
Scientific-Method Conference on the Problem of Breaking-up
Rocks by Explosions
following papers were presented:
"A new test for the examination of explosives in
crushing operations" by L. I. Baron, B. D. Rossi,
Institute of Mining, Ac.Sc, USSR;
"An investigation of the brisancy according to Hess as
a characteristic of the properties of explosives in
breaking-up rocks" by S. P. Levichik, Institute of
Mining, Ac.Sc., USSR;
"On the influence of the explosive characteristics
of explosives on the quality of breaking down of highly
fissured and flooded rocks" by V. I. Mosinets,
Institute of Non-Ferrous Metals and Gold;
"On the laboratory technique of determining the breaking-
up of rocks" by L. I. Baron, R. V. Orlov, V.M.Kubatov,
Institute of Mining, Ac.Sc. USSR.
In the section relating to determining the dimensions of
fragments the following papers were presented:
"On the quantitative indices of the quality of
breaking-up of rocks and the technique of their
Card 3/5 determination during work with explosives in railroad

BOV/24-58-5-30/31
Scientific-Method Conference on the Problem of Breaking-up
Rocks by Explosions
construction" by Ye. Yu. Brodov, TsNIIS;
"Industrial production methods of estimating the
fragmentation of rock produced by explosive breaking-up
in quarries" by G. P. Demidyuk, and G. S. Cherepanov,
Institute of Mining, Ac.Sc. USSR;
"Photogrammetric method of evaluating fragmentation of
a rock mass" by 0. S. Mechikov, Moscow Mining Institute.
In the section relating to the influence of the
parameters of explosive fragmentation on the breaking-up
of rocks and data of industrial investigations the
following papers were presented:
"On the degree of fragmentation of ore and determination
of its optimum value" by V. I. Terentlyev, Mining-
Geological Station, Ac.Sc., USSR;
"On the first results of applying inclined bore holes
of a reduced dimension for explosive work under difficult
rock conditions in the Pervoural quarry" by N.U.Turuta,
Sverdlovsk Mining Institute;
"On determining the rational degree of fragmentation of
Card 4/5 rocks by means of explosives" by B. N. Kutuzov, Moscow
Mining Institute.

SOV/24-58-5-30/31
Scientific-Method Conference on the Problem of Breaking-up
Rocks by Explosions
Twenty people participated in the discussion.
At the end of the conference it was decided that further
work on the problems discussed requires efficient
coordination and that the present state of the art in
this field lags behind the requirements of the Soviet
Mining Industry. The necessity was emphasized of
studying the rate of fragmentation of rocks by dynamic
methods; in accordance with the proposal by the Mining
Institute, Ac.Sc. USSR a simplified method of dynamic
tests are to be carried out on many types of rocks.
The Hess test is inadequate for evaluating the effective-
ness of various explosives for breaking-up rocks.
Card 5/5

AUIHOR: -,Solomonov M BOV/24-58-5-31/31
Tril'u: Experience Gained in Vacuum Treatment of Bessemer
Steel (Opyt vakuumnoy obrabotki Bessemerovskoy stali),
Scientific Council of the Institute of Metallurgy imeni
A. A. Baykov (V uchenom sovete Instituta metallurgii
im A. A. Baykova)
PERIODICAL: Izvestiya Akademii Nauk SSSR Otdeleniye Tekhnicheskikh
Nauk, 1958, Nr 5v p 144 (USSR3
ABSTRACT: At the meeting of the Scientific Council on March 20,
1958 a paper was read by L. M. Novik on the results of
investigations of the Institute of Metallurgy and the
imeni Dzerzhinskiy Works (under the leadership of
Corresponding Member of the Ac.Sc. USSR A.M.Samarin),
on the properties of Bessemer steel which was vacuum
treated in the ladle. The first industrial experiments
were carried out by the Institute in 1952 and 1953 at
the YenakiyeNoWorks and the experiments on introducing
the process were successfully carried out in 1957 in
the imeni Dzerzhinskiy Works where vacuum plant was
constructed for a vacuum ladle of 22 tons capacity.
Card 1/3 Detailed analysis of the results of the operation of this

SOV/24-58-5-31/31
Experience Gained in Vacuum Treatment of Bessemer Steel
equipment led to the following conclusions relatinG to
the entire process of vacuum treatment of liquid metal:
at a residual pressure of 5 to 10 mm Hg col. vacuum
treatment for 14 to 15 mins ensures very thorough
deoxidation of the metal solely with carbon which cannot
be achieved even by means of diffusion deoxidation and
thereby the oxygen content in the metal may reach
0.005 to 0.0007%. The produced steel is not sensitive
to flaking since the content of hydrogen reaches a lower
limit of solubility in iron at room temperature. The
content of nitrogen in rimming steel"reaches 30 to 5W6"
Cof the initial value ?J and can be redaced still further
by increasing the power of the vacuum pumping system.
The vacuum treatment brings about a considerable increase
in the ductility of the steel without affecting the high
strength; in the case of alloying with 0.1 to 0.15% V,
an increase of the ultimate strength of 20% is achieved
whereby the impact strength remains at the level of
ordinary steel. After normalisation anne@ling, the
impact strength is increased to 4-5 kg/cm . The thus
Card 2/3 produced rimming steel has good welding properties and is

SOV/24-58-5-31/31
Experience Gained in Vacuum Treatment of Bessemer Steel
not subjected to thermal ageing in the near weld zone;
normalised vacuum steel is not sensitive to mechanical
ageing, the impact strength of the specimens does not
drop and in some cases even increases. In the case of
vacuum treatment of liquid metal in the ladle degassing
proceeds throughout the entire mass of the metal. It wac
mentioned in the discussion that these investiGations are
of great scientific and national importance and permit
solving the problem of increasing the quality of the
Bessemer steel without oxygen blowing of the iron.
(Note: This is a complete translation)
Card 3/3
uscow-Dc-6o.776.

AUTHQXL_L. S. Solomgrm-,_,---___ - SOV/21+-58-6-34/35
TITLE: The Current State of Pneumatic and HydrRulic Automatics
(the second All-Union Seminar on Pneumatic and Hydraulic
Automatics) (Sovremennoye sostoyan.-Iye pnevmo-gidro-
avtomatiki (na vtorom vsesoyuznom seminare po pnevmo-
gidroavlicheskoy avtomatike)
PERIODICAL: Izvestiya akademii nauk SSSR. Otdeleniye tekhnicheskikh
nauk, 1958. Nr 65 pp 156-158 OSSR)
ABSTRACT: The second Seminar was held at the Institute of Automatic3
and Telemechazlics on 17-19 March 1958. The main Russian
centres and East European countries were represented.
The president of Giprogaztopprom, V.A. Nikitin, dealt
with crude oil-treatment processes as objects for auto-
matic control, and with the devices needed for full-scale
automatic working in such processes. R.-A. Auzan
(TsNIIKA, Moscow) dealt with methods and results in
ra"atlon to experimental studies on BRB-9A and BP-27
L L'-L
automatic control units. The structural diagram of the
regulator was given, with transfer functions and other
Card 1/5 relevant features. L.L. Feygellson (Tsvetmetavtomatika)
briefly reV4 ewed Soviet and foreign designs of pneumatic.

SOV/24-58-6-34/35
The Current State of Pneumatic- and Hydraulie Automatics
transducers, especially those for pressure, vacuum and
pressure drop., V.M. Dctkin and M.L. Kurskaya (NIOP and
K) and Yu.I. Ostrovskiy (Institute of Automatics and
TelemeQhani(,s) dealt with -varlous systems for controlling
a two-oomponent. reaction, and with an automatic titromet-er
for assaying one of the produ,,ts. Laboratory test results
were given. H.M. Nadzbafov dealt with the work on
pneumatio ,,omputing dev.ices done at the Institute of
Automatics and Telemechanics (IAT). Devices for extrac-
ting square -roots and for dividing and multiplying were
amongst those dealt with. AJ.., Tall also dealt with
digital pneumatic [e-mail] devices that had been worked
on at the Institute [.,.f i0matir;s and Telemechanics; the
main part is a pneumatic relay. L.N. Zalmazon (IAT)
discussed a new aerodynamir,, oscillation generator with no
moving parts; air streams interact to produce the
oscillations. Zalmazon and A.I., Semikova also dealt with
Card 2/5 aspects of the pneumatic dividing and multiplying device
developed at IATi VA. Dmitriyev (IAT) dealt with a
piston-operated pneumatic-, ser-vo,, Ye.V. Gerts of DUSh,

SOV/24-58-6-34/35
The Current State of Pneumatic and Hydraulic Automatics
Ac. Sc. USSR, considered the existing formulae for the
effective forces or working areas of membranes in
pneumatic power drives. A.L Semikova dealt with
pneumatic integrators, and ways of increasing their
accuracies. V.D. Mironov discussed a series of electronic
hydraulic regulators developed at the All-Union Heat
Engineering Institute. Electronic amplifiers are used
In conjunction with hydraulic (water) servoss
Jan Hampl dealt with a similar type of regulator made at
the K2-izik-Sm1ahz)-r -- factory -in Prague; the regulator
is mainly useu ior voltage control purposes.
B.L. Kbrobochkin (Stankozavod, Moscow) described a new
lathe feed drive mechanism (hydraulically operated) with
negative feedback. The response is almost linear and
suitable for automatic control purposes. I.Z. Zaychenko
(ENIMS) dealt with stability studies on hydraulic and
compressed-air systems. The stability of hydraulic
devices can be combined with the convenience of com-
Card 3/5 pressed air. P.Ye. Baloban and G.N. Makhan1kov dealt
with standardized hydraulic regulators used in piped

SOV/21+-58-6-34/35
The Current State of Pneumatic and Hydraulic Automatics
water supply systems. Piston-operated servos are much
more reliable than membrane-type ones. L.S. Bron (Special
Design Bureau 1) described hydraulic systems for self-
actuating turret lathes (a new development in the USSR).
A.F. Arkhangel'skiy (Chelyabinsk Tractor Works) described
how the power handled by URS speed regulators had been
increased without increasing the size. Ferner (Eastern
Germany) dealt with "Pneumatlc regulators and Computing
Units1s; pneumatic dev. 4-ces used In digital computing
sections of automatic -,ont-.ols were described. Units
that could be bruilt up in'to various computing elements
were detailed; low pressures (-'Zo 1.00 mm of water) are
used. Josef Kveton@ chief designer at the Regula-Viva
works in Czechoslovakia, described pneumatic devices,
divided into two groups: one from 0.2 to 1.0 atm, and the
other from 0.7 to 3.5 atm. The latter set is meant for
use with boller systems. Balanced systems are us,-d in
the recording and indicating instruments; the control
Card 4/5 systems are built in unit form. A designer from Britall
(Eastern Germany) described hydraulic. automatics work, in

SOV/24-58-6-34/35
The Current State of Pneumatic and Hydraulic Automatics
which remote-controlled systems for use in chemical plants
were dealt with. A special feature is that pneumatic
and hydraulic systems are combined, and that high
pressures and corrosive atmospheres are envisaged.
M.A. Ayzerman summed up the results presented, and
emphasized new features (combined pneumatic and
hydraulic systems pneumatic computers, low-pressure
pneumatic devicesi.
Card 515

SOV/24--58-7-54/36
AUTHOR: Solomono
TITLE: Accuracy and Interchangeability of Technical 1.11easurements
in Machine Construction (Voprosy tochnosti,, vzaimozamen-
yayeinosti, telchnicheskikh izmereniy v mashinostroyenii)
PERIODICAL: Izvestiya AkademlA- nauk SSSR, Otdeleniye teldmicheskikh
n'%
nauk, 1958 Nr 7, p 151 (USSR)
ABSTRACT: A scientific session of the Komissiya po teldmologii mashinc-
stroyeniya AN SSSR (Committee of Machine Construction
Technology of the Ac.Sc., USSR) was held on May 9, 1958.
Academician V.I. Dikushin surveyed some Soviet successes
in this field and discussed unsolved problems,, auality
control, automation and standardisation, the la@ter being
of special importan--- with decentralisation of industry,,
Ye.R. Dvoretskiy, cMef engineer of the Byuro vzaimozamen-
-he research
yayemosti (Interchangeability Bureau) outlined 4?1
and design work of the organisation and discussed co-op-
err.i.tion with ot-her bodies. Its aims also include the
establishment of working standards. waste prevontion,
development of ne,,,; types of measurinC., ins-uruments and
imDrovements in the accuracy of measurements in machine
Card 1/2 Construction. A.N. Kurapov reported work on mact&tng accuracy

SOV/24-58--?--34/36
Ac.curacy and Interchangeability of Technical Measuremenrs in Machine
Construction
with autowatic. machine tools in instrument production,
carried out at the Kafedra te-khnologii aviatsicnnogo
priborostroyeni-va (Aviation Instrument Constru-,rion
Technolog: -,f MAI. I.I. Nanmov of NIAT in his
paper considered blade product.Jon for gas-turbine motors.,
while K.A. Gipp reportei-. "--. t-"Vt Nauchrio-issledovatel@--
skiy institut avtomobillnoy teldmalogii (Automobile
Teohnology Sci.entific Research Institute). Other papers
dealt with a new phozo-pneumatic element, instruments for
ball-bearin,@ quality control and for gauging mould
accuracy, the matching of teeth with protective coverings,
new radioactive control methods and other subjects.
Card 212

SOV/24--58--7-35/36
AUTHOR: Solomonovi
TITM 'First Conference on the Theory of Gravitational Methods of
Concentration (Pervoye soveshchaniye po teorii gravita-
tsionnykh metodov obogashcheniya)
PERIODICAL: Izvestiya Akademii nauk SSSR Otdeleniye tekhnicheskikh
nauk, 1958, Nr 71 PP 151 - 152 (U'SSR)
ABSTRACT: On May 14, 1956 a conference was held at Inntitut gornogo
dela Akademii nauk SSSR (Mining Institute of the Ac.Sc.,
USSR) jointly with the Tsentrallnoye pravleniye Nauchno-
tekhnicheskogo gornogo obshchestva (Central Board of the
Scientific and Technical Mining Society) on gravity
concentration methods. Bodies participating included the
bloskovskiy Sornyy institut (Moscow Mining Institute).
Mekhanobr institute and the Magadanskiy nauchno-issl@dova-
tellskiy institut (Magadan Scientific Research Institute),
The comference heard with special interest reports on new
ideas oL stratification in jigSing and the influence of
various factors on jigj@in& and various applications of this
pro--ess. Other reports indicated that imDortant work on
the development of techniques ar4 appoirat-mi va- +awid.t..V cu-,-
Card 112 centration of a wide variety of materials is proceeaIng

60V/24-58-7-3 5/36
First Conference on the Theory of Gravitational Methods of
Concentration
at several institutes. The conference noted the
promising results in investigations of ji[%ing being obtained
by new methods and discussed research progra-mme.3, The
need for developing models of centrifugal jiGging machines
was indicated.
Card 2/2

"'OLOICU4. M.
,j -- , " -
Scinntific technical confrirence on dosigning now - type eqi1Ipmnnt
for eloctric power station units using superheated steam. Izv.
All SSSR. Otd.tekbn.nauk no.7:152 Jl 158. WIRA 11:9)
(Electric power stations) (Stsan, Superheated)

AUTHOR: Solomonov,..M. SOV/24-58-8-35/37
TITLE: Scientific Conference on the Problems of the Water Regime
'
Sater Preparation and Ensuring Steam Purity in Atomic
Power Stations (Nauchno-te-khnicheskaya sessiya po
voprosam vodnogo rezhima, vodopodgotovki i obespecheniya
chistoty para na atoi-,Lnykh elektrostantsijakh)
PERIODICAL: izvestiya Akademii Rauk SSSR, Otdeleniye Tt@kl-riicheskikh
Raukv 1958, 11r 8, PP 158-159 (USSR)
ABSTRAC`2: This conference was held on Nlay 26-28, 195,,'... @111eii papers
wez-e x-ead, including the following:
Ac.Sc. USSR) "Feat,-,res. of the
Styrikovich (ENIN
A
M
.
.
,
jsn@
processes of steam generation in atomic !@'U-Stior
T. LIargulov, 0. 1. Nlartynov (UEI) t;j' the
water re6ime in atu,,-iic power stations";
F. G. Prokhorov (VTI) ""dater preparation ir- L,)-alc power
stations";
P. A. Akollzin (MEI) "Corrosion of the structural steels
of atomic power stations";
Z. L. Miropollskiy (ENIV, Ac.Sc. USSR) "Radioactive
contamination of the steam-water channels of atuomic power
Card 1/3 stations";

SOV/24-58-8-35/3?
Scientific Conferences on the Problems of the Water Regime,
Water Preparation and Ensuring Steam Purity in Atomic Power Stations
L. I. Katkovskiy (MEI), D. G. Tskhivirashvili (Power
Institute, Ac.Sc. Georgia SSR) "Investigation of the
solubility of inorganic compounds in steam and its
influence on the operation of atomic power stations";
G. G. Bartolomey (ENIN, Ac.Sc. USSR) "Determination of
the influence of suspensions on the swelling of the level
at atmospheric pressure";
V. K. Zavoyskiy, V. N. Vorobyev, R. L. Serdyuk
(Laboratory of Thermal Technology, Ac.Sc. USSR) "Depen-
dence of the density of steam-water mixtures on the
diameter of the tubes and on the derived speed of steam
at atmospheric pressure". The presented papers justified
the conclusion that investigations in the field of design
of reactors and steam generators aimed until recently
wainly at studying the physical processes and the heat
exchange. The state of the water regime, the technology
of water systems and the methods of producinS pure steam
in atomic power stations has not been paid sufficient
attention in research institutes and higher teaching
Card 2/3 establishments. The disclosed information indicates that,
in the fields of waterpreparation, water regime, corrosion

6OV/24-58-8-35/37
Scientific Cofferences on the Problems of the Water Regimel
Water Preparation and Ensurin2; Steam Purity in Atomic Power Stations
and steam purity in atomic power stations', the following
V -
work is at present bein6 carried out; Investigation of the
watar re6ime, investigation of methods of producing pure
steam and of transfer of radio-activity in atomic power
stations, investigation of the bubbling process as applied
to homogeneous and heterogeneous reactors and investi-
6ation of the synthesis of ion exchange materials for
water preparation. Furthermore, corrosion processes are
also under investigation. The conference has established
that a number of design specifications relatin@; to the
content of suspensions and dissolved elemenL3 in the steam
do not comply with the requirements of the fast-developing
atomic power generation industry (contents of chlorides in
the blow-down water of the steam generators, sodium content
in the steam).
1. Atomic power plants--Water supply 2. Atomic power plantq---Operation
Card 3/3 3. Water--Impurities 4. SU.,am--Impurities

2-UTHOR: Solomonov, M..
TITLE: Theoretical and Experimental Problems of Friction,
Wear -and Lubi,ic@ztiun of .1achinery (Teoreticheskiye i
e.`.speri.,u,ental1Y@)rje voprosj- trenlya, i--nosa i s,-;azzl-.i
mashin)
PE-RIODICAL: Izvestiya Akademii liauk SSSR, Otdeleniye Teklu-iicheskikh
Nauir-, 1958, Ilyr 8, P 159 (USSR)
ABSPRACT: Between April. 9 and 15, 19'58 the -third All Union
Ovonfer-ince ou friction and wear was held zat the
IAstitute of _--.chinery, Ac.Sc. USSR. Over 800 delegates
froL, various ii@dustri@7-1 centref@ i)urticinated, includin6
over L[-@; repreEentatives of research establisl-ments and
laboratoriesl 170 representatives of Iiii;her teachinE,
ectablishiaents @@nti over 170 representr. Lives of Works an-33
a@hftiniStr,'LtiOUS. Specialists fro@-,, C,,,echoslova':-.ia,
_,jaania and Hum-a-L-y also participated. In the plenary
Ro u
sesoion the follo, ,iin@, int:L-oductory pupers viere read:
"Freseut Trendc in the Development of .-he Il,@-drodynamic
Theory of LubricF.Uion'l b,7 Ye. M. Gut'yar; "Certain New
Proble.@.s in the Field of Lubrication aiO Lubricatiri@,,
by G. V. Vino.@;radov; I'Preseilt-day Proble,s of
to i.

P -:3-36/37
;mnd ProbleLls of Friction, We,-jr and
Lubr.',_c,.IAon c)f
Boundary Lubric,--tion" by B. V. Deryai@in; "Development
(,f t*[)e @"@Uudy of Dv.@- F-r-iction" by I. V. 1:7.@aL@oilsykiy;
IPresei;'u- Tren-ls iii tho -Development of tle Science on
a r @ -,.-t L I
t':, . u-I *We_@,r R@:iz@tancell by "I. Ydiriu-hchov.
I
150 P@3rers m-e-re re@_tl in sectional Th@e papers
t'i ,@ :.Iiscu.,;cions which follov,ed shuvied (Iarillj@
L @ trecent neriod --ccurate metal-physics iethods of
invest-'I'.."iLion of ILe active layer@; or Oit: .;'.:'Uuls during
fr4
_Lct.-ion have beon develoned. In the section dealing
@"Ie I-lydroaylla.-Ac theory of lubricatiw@. slidini@
were described re!:Ain :-;) 'Uhle
U
of ta""-ID6 into consi the
-r-e cui
@,r_d t1te v--i-i-dole vi cf th
uil 2.@,yer rina also itives'Uigation. of
iubricatioii. In the papers read in thc, secliuii wi
lubrication aiifl lubricants, the followin- -oere considered:
additives e;isuriiq:- the possibility of usii;.-. ;Als of
vari,:;us ori-IE in ,a@@-,chinery and I.C. of vLa@ijjus
type-',in@@ludir..E; '.11-ose operatin -, -;.,ith sulphu.-(jas diesel
L)
ILV` fuel; h@ pol5-aer adcJitives to high viscosity 0-1.1s

I
SuV24-53-"'-,',6/5?
The..re bical wid Experimental ProL_e.--ils of Friction, Wear and
Lutrication of I'llachinery
intended for operation at lo-..,j temperatures; 6reases based
on syrithetic aci(Is, etc. The trend of further
lixesti-Sations in the various fields under discusnion
..CrO ',.UtlilLed.
(1-lote: This is a conplete translation)
1. Machines---Lubrication 2. Bearings--Friction 3. Abrasion
4. Lubricant additives 5. Lubricants--Theory 6. Bearings--Lubrication
Card 3/5

SOLOMONOV, I.I.S.
-Jwlrwyr"*@-W=@@ @
Problems of combustion and carburetion in diesel engines. Izv. AN
SSSR. Otd. tekh. nauk no.9:156-157 S '58. (MIRA 11:10)
(Diesel engines)

SOL40MOIJOV M.S.
W 4@"44,%M
General meeting of the Department of Technological Sciences of the
Academ.v of Sciences of the U.S.S.R. in June 1958. Izv- AN SSSR Otd.
tekh. nauk no.9:157-160 S 158. (MIRA 11:10)
(Academy of Sciences of the U.S.S.R.)

SOV/24-58-10-34/34
AUTHOR: Solomonov. 11.i. S.
TITLE: Conference on Water Preparation in Thermal Power Stations
(0 vodopodgotovke na teplovykh elektrostan-tsiyakh)
PERIODICAL: lzvestiya Akademii nauk SSSR, Otdeleniye tekhnicheskikh
nauk, 1958, Nr 10, PP 159-160 (USSR)
I
ABSTRACT: During June 24-2?, 1958, a conference took place on problems
of water preparation in thermal power stations of high, inter-
mediate,5 super-high and super-critical pressures. The confer-
ence was convened by the Commission on Steam of Very High
Parameters of the Power Research Institute, Academy of Sciences
USSR, imeni G. M. Krzhizhanovskiy, jointly with the Ministry
Of Power Stations USSR and the uloscow Scientific-Technical
Society of the power industry. Over 400 representatives of
scientific research establishments and of power stations par-
ticipated. In the section on design, setting and operation of
combined plant with magnesium desilisizing, the following pap-
ers were read;
1) "Experience in setting up and operation of water treat-
ment plant with desilisizing by means of magnesium", V. F.
Gvozdev (ORGRES),
2)"State and tasks in the development of plant for magnesium
desilisizing of water in thermal power stations" V. M. Kvyat-
Card 1/5 9

SOV/24-58-10-34/34
Conference on Water Preparation in Thermal Power Stations
kovskiy (VTI),
3) "Schemes of automation of plant with desilisizing by means
of magnesium", Ye. N. Krasotkin and V. M. Kvyatkovskiy (VTI),
4)"Probletas of designing combined cathion water treatment
plantswith magnesium desilisizing", A. A. Krupchitskiy
(Khar'kovskoe CD otde'Leniye TEP),
5) "Desilisizing of the water 'by means of filters", 0. N.
Shemyakin (VODGEO),
6)"Investigation of the process of magnesium desilisizing of
water at elevated temperatures", L. 14, Zhivilov (VTI),
7)"Magriesiuia-zathion method of desilisizing water", L' S.
Foshko (Donbassenergo).
In the second sezbion, "&cperience in designing setting and
operation of chemical desalting plant", the foliowing papers
were read:
1) "Results of investigations and of industrial tests of
chemical desalting plant and prospects of their application
0
in thermal power stations with super-high and above-critical
stea-m parameters", F. G. Prokhorov (MES SSSR),
Card 2/5

SOV/24-58-10-34/34
Conference on Water Preparation in Thermal Power Stations
2) "New ionites for water preparation plant and prospects of
their industrial manufacture", A. V. Pashkov (Institut
plastmass im. Prunze),
3)"Problems of design of chemical desalting plant", V. S.
Chernov (KhOTEP), I. Id. Sokolov,
4) "Automation of pressure filters for water treatment in
power stations", S. M. Gurvich (kJOTsKT1I).
In addition to these papers, 20 informative communications
of various local representatives were presented. It trans-
pired that during recent years methods of magnesium desili-
sizing and of thorough chemical desalt-ing of water have
gained extensive utilisation in Soviet power stations and
these played an important role in -the development of Soviet
steaju power. Successful mastering of magnesium desilisizing
of water together with the application of stepwise evaporat-
ion in boilers, washing of steam and other measures enabled
ensuring reliable and economic exploitation of high pressure
0
(110 atm) boilers in combined heat and Dower stations which
ouerate with a large loss of condensate During recent years
rational designs of illuminators have been developed and also
methods for dry dosing of caustic magnesite as well as mech-
anization of its handling and an original method was described
Card 3/5 C)

SOV/24-58-10-34/34
Conference on Water Preparation in Thermal Power Stations
of desilisizing by applying lime on the preliminarily mag-
nesium-cathionated water, In individual cases it became
possible to feed the water directly from the illuminators
into cathion filters of the first stage, in which the process-
es of filtration and cathion treatment are combined. Work has
started on automation and mechanisation of preliminary purifi-
cation and of introducing treatment involving high temperature
pre-heating of the water. Water treatment by application of
lime and in individual cases by simultaneous desilisizing by
magnesiwn in the case of heating up to 1200C permits more
thorough elimination of silicon compounds. High temperature
desilisizing requires special apparatus operating under
pressure, thermally stable cathions and also new automatic
circuits. Laboratory, semi-industrial and industrial tests
of the filtration method of desilisizing waterldeveloped by
VODGEO have shown that this method is applicable also for
H-a -athionated water without preliminary application of lime.
In c@emical desalting plants which use iordlis of Soviet manu-
facture- it became possible to solve the problem of feeding
very high press-tire drum boilers (180 atm) and thus extensive
prospects are opened up of using thoroughly desalted natural
Card 4/5

6OV/24-58-10-54/34
Conference on Water Preparation in Thermal PoNver Stations
water and condensates for feeding powerful direct flow boilers
of super-critical pressures. An ionite method of
purification of condensates of nitrogen-fat plants permits
utilising desalted condensate for feeding high pressure
boilers and returning regeneration products into the techno-
logical cycle of the plant for producing from it the indus-
trial product. Such a process of purification of the waste
condensates allows reducing operational costs for water treat-
ment and feeding of industrial heat-power stations in chemical
works. Various deficiencies were pointed out in the existing
technolo.-Y of water purification as well as in the designs
adopted in some of the projects.
Card 5/5 uscon,,,-Dc-6O..653

AUTHOR: Solomonov,, M. 807/1180 -59-1-27/29
TITLE: Conference at the Leading Ore-Mining Combine in Tyrny-Auz,
(Kabardino-Balkariya) (Soveshchanlye na peredovom kombinate
gornorudnoy promyshlennosti v Tyrny-Auze (Kabardino-
Balkariya))
PERIODICAL: Izvestiya Akademii nauk.,SSSR, Otdeleniye tekhnicheskikh
nauk5 Metallurgiya i toplivo, 1959,Nr 11 P 123 (USSR)
ABSTRACT: A conference was convened on 15-18th September 1958 at
the Tyrny--Auz. Combine by the Institut gornogo dela
Akademii nauk SSSR (Mining Institute of the Academy of
Sciences of the USSR), Gosudarst.vennyy muchno-
tekhnicheskiy komitet Soveta ministrov SSSR (State
Scientific and Te;@.hnisal Committee of the Council of
Ministers of the USSR), the Kabardino-Balkarskiy
sovnarkhoz (KabaTdiLno ... Balkariya Boonomic Council) and the
Nauchno--tekhnicheskoye obshchestvo tsvetnoy metallurgii
(Scientific and Tec@hnical Society for non.-ferrous
Metallurgy), The following reports were presented:
M.N. Yermolenko, GITK (probably a mistake for GNTK (State
Scientific and Te,:;hnical Committee) - Abstractor) of the
Council of Ministers of the USSR, "Main Lines for
Card 1/3 Technical Deval-cpment in the Underground Mining of Ores

SOV,'180 - 59-1-27/29
Conference at the Leading Ore-Mining Combine in Tyrny-Auz,,
(Kabardino-Balkariya)
of Non-Ter-1-olis and Rare Metals Jn 1.959..,196511;
M,I. Agoshkov, IGD AN SSSR (AS USSR), "Improvement in the
Methods of the Underground Working of Large Deposits of
Hard Ores!'; V,G, Dfazhkov, TsNIGRI. "Experience in the
Use of zhe Single-Staga Mettod of Working Deposits Under
Condit-ions PreservIng the Su-:fac-.e from Caving"; A.A.Popov,
Institut Uniptomed (U-1i romed Institute), "Experience in
the Woilking and Safaty, of Inflarwriable Ural
Ores"; A.,G,, Shpital-nikoy. Iristit-At Giprotsvetmet
(Glpxots@etruet Institute), "Economic Effectiveness of
Using Powerful Equipment in Working Large Deposits";
D.,P. Bobro-,.,, "Work of the VNIIBT Institute on the
Produc.t.1r,r of Modern Boring Equipment"; D.M. Bronnikov
(Mining Institute AS USSR), "Comparative Evaluation of
Methods of Charge D*.v.-.'.lljng in Hard Ores"; N,A. Chinakal,
Sibirskoye otdeleniye AN SSSR (Siberian Department of the
AS USSR), "Shield P-zcpping in Working Large Luzbass Seams
and the Possibili-ly of Using this Propping System in
Working Ore Deposits-; AN. Bud@ko and L.I. Burtsev
Card 2/3 (Mining Institut@, AS USSR), "Systems of Working Large
Hard-Ore Depos:its ina Foreign Quarries";

sov/18o,-59.-l-27/29
Conference at the Leading Ore-Mining Combine in Tyrny-Auze
(Y-abardino-Balkariya)
V.V. Nedin, IGD Ukr SSR (Mining Institute Ukr SSR), "Ways
of Combating Dust in Mining Operations". After this the
conference heard reports on work at the Norillskiy
kombinat (Norilsk combine), the Nikitovskiy rtutnyy
kombinat T:!:::e-'! combine , the I'Verkhniy" rudnik
("Upper" quarry) the kombinat Sikhal.L (Sikhote-Alin'deposits)
of the Degterskoye mestorozhdeniyo., (>-.s%ea=skcye dejxis_2'-,)
Leninogorskiy kombinat (Leninogorsk combine), Tyrny-
Auzskiy komb1nat (Tyrny-Auz.- combine), Salairskiy rudnik
(Salair quarry) and the Dzhezka-,gansloyemestorozhdeniye
Card 3/3 (Dzhezkazgan deposit). The conference decided on
measures for improving mining.

AUTHOR: Solomonov, M's. SOVII 80- 59-1-28/29
TITLE: Conferencte on the Physics of the Disruption of Rock and
Tool Waar (Sovesh-@haniye po fizike razrusheniya gornykh
porod i iznosu instrumentov)
PERIODICAL: Izvestlya Akademii nauk SSSR, Otdeleniye tekhnicheskikh
nauk, Metallurgiya i topli-,o, i9l@9,Nr l,pp 123-121+ (USSR)
.1 .
ABSTRACT: On 18-12.0 November 119,58 a ronferenc..e was hold at the
Institut go-1-nogo de'la AN SSSR (Mining Institute AS USSR).
One group un. tte physics of rock breakdown, heard the
following reports: A,N, Zelenin. (:@(-]D AN SSSA), on "Some
Investigations in the Field of Mohr's Ring Construct 'ion";
A,,I, Be-ron, VUGI, on "Physical Nature of Effects in the
Cutting of Bi-jt;tla Rocks"; R.Ye@ Bygeles.) VNIIBT, on
"Mechanism of Ro--k Breakdown ir. Static and Dynamio
Insertion of Pun&s"'i V.P. Samoy-lov2 NIIOSP, and Shih
Chung-han @MIIT) on "Experimental Investigation with the
Aid of RadioactJt,ve Isotopes of the Process of the
Introduction of Symmatric-al Wedges (Stamps) into Rocks";
V.M. Matro5or ., Tomskiy poalitekhnicheskiy institut (Tomsk
Card 1/3 Polytec-.hniral Institl.@ta on "The Breakdown of Rock in
Vit-ration-Rotation D-rilling by the Core Method".

sov/18o-59-1-28/29
Conference on the Physics of the Disruption of Rock and Tool Wear
The second group, dealing with tool durability) heard
the following reports: A.V. Kuznetsov (IUD AN USSR) on
"Abrasive Properties of Rocks and Their Influence on
Drill-Edge Blunting (in Perforation Drilling)";
M.I. Smorodinov5 NIIOSPq on "Investigation of Rock-Cutting
Tool Wear with the Aid of Radioactive Isotopes";
VJ. Sevast2yanov, VUGI, on "Investigation of Tool
Durability in the Course of Impact Chipping of Rocks";
I.A. Ter-Azarlyev, AISM, on "Main Stages in Cutting-Tool
Wear in Stone Cutting1c; K.S. Vartanyan. AISM, on "Local
Tool-Wear in Stone CzAttAing a:id Fr-iction Work"; G.C.Karyuk@
Novocherkasskiy politekhnichaskiy institut (Navocherkassk
Polytechnical Instituta) on 111m,estigation of ShBYA-Combine
Cutting-Tool Weai@'@; V.F. Kii@iyenko,, Opytno-issledovatell -
skiy tsr=kh Noril-'sk:igo kombinata (Ex arimental-esearch
department of the Noril'-skiy combine5 on "Increa'sing the
Durability of the Dzilling To-:)l and the Drillability of
the Gabb@:,odiabases of the Noril-sk. Daposits";
B.N. Lrablmo-7 on the "Work of G-4proa'glemash".
Afterwards@ _,=m7icii,ations wer&,@ presented by.representati-
Card 2/3 ves of tha Dneprapetrovskiy go-,:ryy institut, (Dnepropetrovsk
Mining Insti-k.ut3). Novjoherkasskly politakbziicheskiy

..59-1-28/29
Conference on the Physics of the Disruption of Rock and Tool Wear
institut (Novocherkassk Polytachni-al Institute),
Khar1kovskiy gornyy Lasti-1Z.-ac' (Ihar@kov Mining Institute),
KazakhskL7 g3rno-metallurgicheski7 institut (Kazak-h
Mining and Metallurginal Institute) and othars. The
conferen.-s noted that littde work had been done on some
of the subqia-.ts disc@ussed. It recommended that work on
the physles o" ro(tk disruption should be aarried out
mairily at thelt-D AN USSR, the Institut geologii i dobyahi
pc1Gznyk-h J.zkopa-j,emykh AN SSSR (Institute of Geology and
Extrv.@tlor% of -ine -als
- M. a )AS USSR) VUGI arA VNIBT;
and work on tc,o' 1. wear and loreakage preferentially at PI,
AISK, 71UGI, VNIII:11 and the Institut tverdykh
Card 3/3
sp"a.o-,- @Hay-d-A!'-Dy* Inst t
u +

AUTHOR: __Solomonov@ M.S. SOV/18o -59-1-29/29
TITLE: Conference at the Mining Institute of the AS USSR. Short-
Delay Method of Rock Blasting (Soveshchaniye v institute
gornogo dela AN SSSR. Korotkozamedlennyy sposob
vzryvaniya gornykh porod)
PERIODICAL: Izvestiya Akademii nauk SSSRI Otdeleniye tekhnicheskikh
naulr@- Metallurgiya i toplivo, 19599Nr 1, p 121+ (USSR)
ABSTRACT: On 26-28 November 1958 a conference was held at the
Mining Institute to discuss problems involved in rock
blasting by the short.-delay method. The conference was
organised by the Mezhduvedomstvennaya komissiya po
vzryvnomy delu (Joint Blasting Committee) of the Institute
and the Tsentrallnoye pravleniye nauchno-tekhnicheskogo
gornogo obshchestva (Central Management of the Scientific
and Technical Mining Society). The conference discussed
the development of the method and noted problems for
solution, It recommended that the Institut fiziki zemli
All SSSR (Institate of Physics of the Earth of the AS
USSR) should develop a lighter portable device for
Card 1/2 measuring the seismic waves produced by explosions and,
together with the PEU and the Soyuzvzryvprom. develop a

sov/18o.59-1-29/29
Conference at the Mining Institute of the AS USSR. Short-Delay
Method of Rock Blasting
standard prooedure for carrying out investigations and
measur6ment of effects.
Card 2/2
USCOPWI-DC-60,891

-OV/2'1-59-1-32/35
AUTHOR: Solamonov. ILS.
TITLE: November General Meeting of the Section of Technical
Sciences (Iloyabrlskoye obshcheye sobran-iye otdeleniya
tekhnicheskikh nauk)
PERIODICAL:Izvestiya Akademii Nauk, SSSR, Otdeleniye Tekhnicheskikh
Nauk, Energetika i Avtomatika,1959,Nr 1,pp 142-143(USSR)
ABSTRACT: A general meeting of the Section of Techn Lcal Sciences
took place on November 4th and was opened by a long
lecture by the Corresponding 1,lember of the Academy of
Science of the USSR., AAL,Larionov- who dealt with the
pr-blem. of hai-1 mague-ci,-, mater--als, Larionov reviewed
the present. state of hard magnetic materials in the
Soviet Uniori@ From this survey it was obvious that
the materials are very important in modern engineering.
The speaker indicated that, the magnets of hard magnetic
materials could be dd.,Aded into the following types:
cast magnets which provide a very high enera; metal-
ceramic magnets; pressed magnets; -ferrite-barium oxide
magnets and anisotropi,-, barium. ma&mets, The speaker
gave a detailed analysis of the properties of those
Card 1/4 magnets and the materials emol.,.yed in them; he also

"OV/24-'; 9-1-32/315-1
November General of the Sec'-ion of llechniLcal SC2_ences
I -
analysed the wasnines i," -.lihi,@h su,@,h magrets a',':e best
employed, The lectur-3 m5 foll,,,wecl by a discussion
during wh-L,@.11-i the paiticipanf;s of the meeting adopted
0
a resolution emphasisn_ng th@-_ impor-rance of hard magnetic
materi-al's -,.rL radar. aviatiC,n, -r_,2.d_Jo er. Ineer:ing,
instrLmen-;: indu-_5-@--ry and ma,:@h@_ns .1-ndusti:7y. The second
speaker was V.A,,Il'in who cl@,.s-.ussed -,,-.he new -urends in
telemee,liani-C.s., in partic-ular -v@-Iip, prcblems investigated
a.n the .1@0.x)ra-,ory headed b7 the speaker. The work of
the labora-,7Qry rould te divided into -uhe follovring
se-+@i-ns-. of tae nod:-;e suppres;sibility
In the ---:f signals f,:r van-to-as types
of moduialicn and sigmal the wcrk is
largely based on the theory of the potential noise
S1.1 pressibility bv the Acadami.@,dan V.A.Kotelniko-vr;
(2
investi.gation cf the nc-se s.tppressibility in the
presence of a cozparati--,ri@ly fluu-tuat4on and
pulse noiqe; (3) Live st-i ga@ Cli of -the possibility of
increasin- the noise suppr-ass-Lb-iaity by empIcyi-ng the
Card 2/4 stati-stics of t-be signal,. study' af the !Lt a+.-.-',' E'c a-!

SOV/24--59-1-32/35
November General Meeting of the Section of Technical Sciences
characteristics of the actual interference in various
communication systems employed in telemechanics. The
results of the investigations in the above field showed
the existance of an optimum channel transmission band-
width and the possibility of determining this bandwidth
for various types of modulation. The next lecture I by
M.A.Ayzerman, was devoted to the problem of employing
the pneumatic methods for performing various mathematical
operations (including logical operations). The speaker
a,ve a sum=ary of the work carried out by a laboratory
AT) of the Academy of Sciences of the USSR. Ile
R
mentioned various types of pneumatic; devices, in particular
analogue computers of the continuous type. An equipment
capable of adding 12 quantities was mentioned. This
equipment contained no moving parts and was in the form
of a pneumatic chamber whose pressure was proportional
to the sum of the pressures applied to it. Devices such
as a differentiator, an integrator, a square-root
extractor and a multiplier-divider were also described.
Card 3/4

6OV/24-59-1--32/35
November General %Teetins of the- Section of 'A'.'echnical t3ciences
The final lecture was delivered by Yu.A.Sabinin, who
discussed the a-utomat-ion of the electrical equipment-
in taleco-opeS.
Card 4/4

@30V/24-59-1-33/35
OTHOR: SS-1 9 aQZ -0 X 4. 2 - S
TITLE: Scientlfic Conferenc .e on Long Distance Elerbrie Power
Transmission (Nauchnoye scveshchaniye po Yoprosam
peredachi elektricheskoy energii na dallnem rass-toyanii)
PERIODICAL:Izvestiya Akademii Nauk, SSSR.. Otdeleniye Teklinicheskikh
Nau-k, Energetika i Avtomatilka,1959,Nr 1;p 144 (USSR)
ABSTRACT: On October "f-11th 1958, a meeting was held at the
Power Institute Imeni G.1"'.Krzhiz-hanovskiy, oil problems
of long distance power transmission. The meeting was
convened by the Commission for Long Distance Power
Transm:i.ssion at the P-1wer ILstitute jointly with the
Central &,alyl of the Scientific and Technical
ASSOCiation of the Power Industry. 250 representatives
of 74 crganisations participated in the meeting., The
followint- main papers wer-- read: "Basic Operational
0
Principles of Frequency Regulat:ion and Distribution of
the Active Powers in the YeEIS" by I.M.Markovicn (ENIN);
"Contribut-ion to the Analys,--s cf Sti-a-Itlixal &@hemes of
6ystems of Automa-tic Retplation of the Active Power and
2requency in Po,.,,,er Systews" by Ye.I.Yure-Ach (LPI);
Card 1/3 lliixperienc-e gained in Intrcducing Systems of Remote

Scientific Conferenn,@e cn long Distanc-. -1@16-@@-,-,:-:L,, Pover Tramsm-ission
Control of the Frequenc-y and t-I'Qe Pcwer ac-.ording to the
ORGRES Kethod" by L-D.Ste.:@-:.I@rsona (ORGEES); "Automation
cf tza Freq@@en,-,Y 113onttrol ard Dist-ribution of Act-ive
lr-,ads" by V.&I.Gorsbteyn O"ITNILIE.), "On r-lia Problem of the
'Sele,--ti-on of tb-I lafzsT Ra-vourable
AD-Istribat:-L'on of 11*ciule@tiou :if 131-kandby Gapac;ity in Power
Systems" by "Autowa@icn of 'Ie@
Distribut,i.--3r, cf A,,;IjI,,re ly,@ads Ln Pcwer Systems by
V.A,S-2atj-,'-?-c-; i.LPTI): *Te-.,'-,rte of Operation
of Hydra-.ilUc Power S-caticn.:@ a-il th,--.-.'Ir InfIvence on the
i,.,ethed of Dereminati--r. c-.P fie'lost Fa-volLrable Regimes
of Povier Sjroteras .1 tv (vialo),
"He.@@.iues of Power Svs-@:ems and. T.Iaeory of Probability" by
N.A.Kart-,rel-ishvi-1--ii "Study .--.f the Problem of the
Ter,bnicV.1e of Deteraination of the Economically 1"lost
Favou.-rable Regime of Operation cf Power Systems Containing
Hydraulic Power Stations" b-,y Y.M@Grcrsht,eyn; "Methods of
Calculation of Optimum Regimes cf flydl-aulic Stations with
Long--te.rm Regnla-cian" by-,','V,,Tivetk@iv (11,11IIE);
Card 2/3 "Prin-.-iples cf the I-j 0 S 4. @'-a r --rable D-@stribution ef the

SOV/211-59-1-33/35
Scientif ic Confel-ence on Long Distance Electric Power 'Transmission
Load between Hydraulic and Thermal Power Stations from
the Point of View of Automation" by N.G.Zayi@sev (LPI).
The work of the meeting showed that Jn spite of the
success gained in complex automation of indi-4idual
power stations, particularly of large hvdraull.c power
stations, the standard of automation of the
technological process of thermal -oower stations is in
many cases inadequate for introducing an overall system
of automation. obsolete methcds of planning and also
the used system of economic -.indices -@-f pcwer stations
have been critici-sed. It was poinved o1r, that in the
case of economica-- 'load dis-i7ribuzion' it is necessary
to take into corlsideratior- losses in the network both
inside tile pcwer system and also in intev-3onnect ions
Card 3/3 between individual systems,
S/()24/5()/000/0G/028/0z8
ja0v of the Tech"
5 -0 Geile Otdel- e a-i:f e 1() 59
-91 er t jj'ca
te @s AJ5, 'Vt oma
TyLe f. .. a
i.011 3.-JI tj.Y
0pXaael F O-a of
D1 a '11p 'DI-1-isl-
7.4est -aa'cklr@ !,A-t'h
I Sr.jelice 1951) @ " t
-POr @ XO-4
@YMI. 00-2 luber, re
IC) -Y 02 Ir t
te fthe Tee 2o Septe The j&e 1,
'0 r 6, P'P tills 0 the. (,, -rjC-!rLG roT
Mee Uair UMSR
.,,,era'- held. Ol@ the 1@5 - t VJO
6 SR -a ell- -pen
S!2RD'G, the A's @Us Shev@falr@ov I lb&e@lber of 09 e8OLs -cast ble,
r respoudins tbodLs oll LeS'ra
jor is @ the
oveci I'll, r 'I alo 0 This a III .
re a. 'bY . th ila-prl - vit-i 0 'ebli OIXIde Ile- t I
jactl -L
was It V1 1 0 ie i
dL dea The Vro@ 0 OL!ce
'all tanal re
Is' i-acrea WorY.i"65 the -r 0
llera In 0-pea-east tg_r at the IWS Cove
cej of the
ins Y; llG9 'I SU-
'Jjorlrl:@r large for Wor '- are a 50-T-VaS110-Yrr
,,,;se P1311 31, ore There
0 Ye a'r the i -r ( , la The
'Ro6'. f iel6s I theVs, 0-11oviu
I a1:1d 0 f
C
f --Le-IdL- The &,.aber
at Ile 0 ,
@UOVLO 8.
all at anjon(l ef &il:16
t-X 0- -j)-rI I@f s3' e spoll
'r-.!.OTI
co-rr
Wor the r@ a-ve . V"@
repo- "' OXIS,33,0
61011;@ f the
0
C()T11r-e"ts tedL 3.11
card 1/4

S/024/59/000/06/028/028
E194/E255
The Sevumber General Meeting of the Technical Science Division
%of AS USSR)
AS USSR B, K, Aleksandrov. Professor N. G, Dombrovskiy,
/of the State Committee on' Automation and Engineering
of the Council of Ministers of the USSR), M. M. Sokolovskiy
(of GOSPLAN USSR), and I. B. Shlayn of the Scientific
Research Institute of Reinforced Concrete, The meeting
approved the general trends of improvemeilt in open-cast
workings described by -the reporter and d1so approved the
related scientific activity of the Mining Tnstitute
(Institut Gornogo Dela) of the AS USSR, The Institute
was recommended to carry out the following investigations
(a) to investigate flow schemes of open-cast working,
ensuring the automation of all production processes in
quarries, including those in difficult climatic and
geological. conditions; (b) to d-svelop basic designs
of high-output quarrying machinery with programmed
control; and (c) the effective development of workings
in complicated hydro-geological conditions and at great
depths, The next report was read by Doctor of Technical
Sciences, _14_.,__L.@@umilovskiy (the co-reporter was
Card 2/4 Candidate of Technic@a&c_fe_nces Lz V. Mell@tstr), It

S/024/59/000/06/028/028
E194/E,255
The September General Meeting of the Technical Science Division
(of AS USSR)
dealt withIthe scientific basis of automatic methods of
control using nuclear radiation, The report reviewed
control methods employing radioactive isotopes and
nuclear radiation, The meeting approved the main results
of the work on the development, :Lnvestigation and
introduction into industry of automatic control methods,
utilising atomic radiation,, It was considered advisable
to direct this work towards (1) development of the
scientific basis of automatic control using nuclear
radiation, including analysis of the accuracy of these
methods under static and dynamic condit-ions; (2) the
development of new methods of automat'Lc control using
radio active isotopes, Darticulariy for controll@@ig the
composition Of COMDlicated substances and mixtures,
and for---llitnmatic ins ctionland detection by the use
of controlled neutron sources, The meeting stated that
insufficient work was beine done in this field by the
AS USSR. The third repor I, was read by Doctor of Technical
Card 3/4 Scien,3es B. V Kantorovich, and dealt with the combustion

S/024/59/000/06/028/028
E194/E25-5
Tl-,e Sei.--teimber General Meeting of the Technical Science Division
(of AS USSR)
of 8Lnd ue' 1-s and of fuel-water emulsions
in a flow of described his work at
the laboratory of the Institute of Combustible.-
Minerals (Institut Goryuchikh Iskopayemykh) of the
AS USSR, where he is studying the main effects of
qombuFRon of fuel DarticleslAin a flow, In the
decisions of the m Jetii@_-T@__was stated that the process
of combustion of particles of pulverised fuel in a flow
is of great importance, Compression. in the flow opens
possibilities for mechanisation and automation and the
development of new high-interisity processes of
combustion. Investigations of the theo.-y of combustion
of particles of fuel in a flow and of associated
problems should be promoted,. The meeting approved the
main trends of these investigations and advised furthe
investigations of the theory with a view to its
practical applicatlon,
Card V4

SOLOMONOV. M.S.
Problem of underground coal mining without the constant presence of
miners at the wall. Izv.AJI 5SSR.Gtd.tekh.oauk.Xet.i topl. no.4:
lgo-191 jl-;,g 16o. (HIR-@ 13:0
(Coal mines and mining)
(Automation)

50141110110v- "'i.
--A@ Scientific Technological Conference on probloas of th,: Kursk
I . Magnetic Anomaly. Izv. All BSSR. Otd. tekh. nauk. Met.i topl.
ft, no.5:239-240 S-0 16o. (MIRA 13:11)
.- (Kursk Magnetk Aiomaly--Congresses)

SOWHOITOVI M. . - --
Belt conveyers are the most progressive and economical type
of continuous transportation. Izv. AN SSSR. Otd. tekh. nauk.
Met. i topl. no.2:188-189 Mr-Ap 161. (MIRA 14:4)
(ConveyJng machinery)

s/18o/61/000/003/012/012
E111/E135
AUTHOR: Solomonov, M.
TITIEi Problems of the interaction of the foundry mold and
the canting
PERIODICALi Izvestiya Akademii nauk SSSR9 Otdoloniye tekhnicheskikh
nauk, Netallurgiya i toplivo, 1961, No-3, PP. 199-200
TZXTt On 23-28 January 1961 the 7th Conference devoted to the
problem of mould-casting interaction was hold at the Institut
washinovedeniya AN SSSR (Instltuto of Science of Machines, AS USSR).
The conference was organized by the Komissiya po tekhnologii
washinostroyaniya (Commission on the Technology of Machine
Construction) at 114ASH. The conference was opened by Academician
V.I. Dikushin who gave its main purpose as the dissemination of
experience gained in investigations to find the relationships
involved, with the object of selecting the best practice, The
following papers were presenteds
"The problem of the operation of the foundry mould'# by B,B.Gulyayev;
"The influence of heat exchange between liquid metal and mould on
the peculiarities of structure of cast iron and steel castingalf by
A.A. Gorshkovi "The Influence of the mould on the quality of the
Card 1/6

S/180/61/000/003/012/012
E111/E133
Problems of the interaction of the foundry mould and the casting
casting" by P.P. B*rS; "Theory of San formation in the mould" by
A.A. Ryshikov and A.F. Spasskiy,- "Methods of regulating and
calculating the cooling of casting& in the mould" by
O.Yu. Notayubinskiyj "Regulation of cooling rate of castings in
the mould" by B.V. Rabinovich and B.V. Babushkin; "Control of
hardening processes of a complex casting" by G.A. Anisovichl
"Investigation of forced cooling of castings in sand mould" by
A.A. Xornilov, V.D. Repkin, G.V. Vartsukov and V.D. Oreshkinj
"Forced cooling of large steel castings in the would" by
V.V. Shiryayev, P.G. Nivikov and P.N. Bidulya; "Investigation of
the interaction between metal and casting of moulds in teeming of
steel" by Yu.P. Solntsev, E.A. Ivanov and B.B. Gulyayev;
"Control of the solidification process of the top of a large steel
ingot" by V.A. Malyshev; "Investigation of processes of inter-
Action Of the mould and secondary cooling systems with the billets
in continuous casting" by N.N. Guglin and B.B. Gulyayev;
"Investigation of the thermal work of moulds used in the
continuous casting of steel" by A.I. Chizhikov, L.I. Morozenskiy
Card 2/ 6

s/18o/61/000/003/012/012
Elll/E135
Problems of the interaction of the foundry mould and the casting
and O.D. Zigell; "Press mould operation in pressure casting" by
I.I. Goryunov; t'Metal shell moulds" by B.Yu. Faygellson;
"The force of the interactions between casting and mould during
the process of heat exchange" by G.F. Balandin and Yu.A. Stepanov;
"Stresses and deformations in box casting due to mould resistance'?
by A.M. Gerchikov and O.Yu. Kotayubinakiy; "The influence of
conditions of heat removal from a large steel casting on its qual-
ity" by P.F. Vasilevskiy and L.Ye. Plotinskiy; "Methods of
evaluating properties of moulds and metals in the temperature range
of hot crack formation in castings" by Yu.A. Stepanovj "Linear
shrinkage of steel during cooling in the mould and hot crack
formation in castings" by N.A. Trubitsin, "The influence of
reaction processes between castings and moulds on the quality of
the cast surface', by F.D. Obolentsev; "Investigation of inter-
action processes of fused high-melting chemically active metals
with mould material" by A.A. Demidova and B.B. Gulyayev;
"Fluidity of steel and the surface cleanliness of a casting in
relation to the parameters of the mould and casting process" by
Card 3/ 6

s/18o/61/000/003/012/012
Elll/E135
Problems of the interaction of the foundry mould and the casting
V.G. Gruzin and L.Ye. Plntir,%kiv-, "The influence of a mould on
the surface quality of castings" by V.0. Yakovlev; "Investigation
of the physico-chemical interaction of alloys with mould materials"
by B.V. Tsarevskiy, S.I. Popell and V.A. Chechulin; "Firing and
filling of shell moulds with a lost wax model" by I.B. Sokol;
"Gating systems in casting in jhell moulds" by G.M. Dubitskiy;
"Surface alloying of cast iron castings with tellurium and other
elements" by S.Ye. Utkin; "Gas pressure at the metal - mould
boundary and the possibility of calculating mould elements for gas
removal capacity" by A.A. Rvzhikov and A.F. SpAsskiv;
"Thermodynamic analysis of gas reactions in a foundry mould" by
V.A. Chechulin and B.V, Tmarevskiv; "The influence of the
intensity of cooling on the structure and properties of alloys" by
I.B. Kumanin; "Influence of mould materials on casting properties"
by A.N. Tsibrik; "Investigation of casting quality on using
various cast materials and coatings" by I.F. Kolchin and
V.V. Ryzhenkov; "Influence of mould temperature on the porosity
of magnesium alloy castings" by M.V. Sharov and YeA. Bibikov;
Card 4/ 6

S/18o/61/000/003/012/012
El1l/E135
Problems of the interaction of the foundry mould and the casting
"Influence of the composition of mould mixtures on the density and
mechanical properties of aluminium alloys" by M.F. Nikitina;
"Improvement in the quality of a large steel casting by means of
accelerated cooling in the hardening period" by P.G. Novikov,
O.Yu. Kotayubinskiy and M.V. Frolova; "Investigation of the
influence of mould coatings on the quality of centrifugal
castings's by Yu.P. Porucbikov, G.L. Khazan and R.I. Silinj
"Investigation of precision casting processes in shell moulds of
a mixture based on thermosetting resins" by A.M. Neymark.
The conference emphasized the importance of the subject matter in
view of the 1965 target of 20.7 million tons of castings. Further
study on the following lines was recommended: (a) experimental
and theoretical investigation of processes taking place in the
casting/mould contact zone; (b) development of scientific bases
for the selection of mould materials; (c) further development of
methods of inveBtigating and checking the physico-chemical and
technological properties of mould materials, which govern their
interaction with the casting; (d) experimental and theoretical
Card 5/6

s/18o/61/000/003/012/012
EIIl/El35
Problems of the interaction of the foundry mould and the casting
investigation of processes taking place in sand and metal mould#;
(a) the further development of methods for regulating moulding by
altering mould parameters. The eighth conference should be held
in 1962 to discusas methods of determining mechanical properties
of castings; principles of selecting alloys with set mechanical
and foundry properties; influence of technological factors on
mechanical properties of castings; results of investigations and
producing norms for mechanical properties of castings of iron,
9tool and non-ferrous alloyal development of methods for raising
the mechanical properties of castings.
Card 6/6

SU LOONOV) j,!!- --
In the Institute of Mineral Fuels. Izv. AN SSSR. Otd. tekh.
nauk. Met. i topl. no.4:175-176 J:L-Ag 161. (MIRA 14:8)
(Fuel research)

i',I*@iciew@orgnnizsition of gearwhswe." -,rc-duction. Vest.matli.. -5?
(KLqA
-77 57 -
(Gear c;ul;ti:%g@

SOLDIMIONOV, N.G.
Population dynamics of the water vole in central Yakutia. Uch.sap.
TGU no.36:250-261 160, (lam 1415)
(Yakutia-Water voles)

SOLOMONOV, N. G.9 CAND BID SCI, "EcOLOGY OF THE WATER
y
RAT (FIELD-MOUSE) IN CENTRAL YAI