SCIENTIFIC ABSTRACT A.A. DANIYELYAN - V. DANK

• Document Type: CREST
• Collection: Scientific Abstracts
• Document Number (FOIA) /ESDN (CREST): CIA-RDP86-00513R000509710012-6
• Release Decision: RIF
• Original Classification: S
• Document Page Count: 100
• Document Creation Date: November 2, 2016
• Document Release Date: August 25, 2000
• Sequence Number: 12
• Publication Date: December 31, 1967
• Content Type: SCIENTIFIC ABSTRACT

11M PHASE I BOOK EXPIoc-*TATION SOV/2476
Aliverdizadet K.S.Y A.A. Daniyelyan, V. I. Dokumentov, A.K. Ibatulov,
V.O. Pakhlavuni (ffe-ce-aYeIT,--I-.-G.-Chicherov, and S.V. Yurkevskiy
Raschet i konstruirovaniye oboradovaniya dlva ekspluatataii neftyanykh
skvazhin (Design and Construction of Equi]pment for Oil Well Exploitation)
Moscow, Gostoptekhizdat, 1959. 652 p. Errata slip inserted. 3,500 copies
printed. ,
Exec. Ed.: A.A. Gor1kova; Tech. Ed.: E.A. Mukhina.
PURPOSE: This book is intended for engineers and technicians of oilfields, machine-
"Xlding and repair plants, and scientific research institutes. It may also be
-useful to students of petroleum vuzes and departments.
COVERAGE; The authors discuss calculation and design principles of equipment used
in oil well operation. In some instances the desiga of production equipment is
also discussed. No personalities are mentioned. There are 66 references,
all Boviet,
Card 1/4

Design and Construction of Equilnent (Cont.)
SOV/2476
Ch- 3. Equipment for Extractiw.5 Petroleum by the Deep-well Pump Method 139
1. Drives for deep-well pumps 142
2. Deep-well rod.pumps 2114
3. Submersible rodless pumpii 282
Ch. 4. Equipment and Tools for Subpurface Repair pf Wells 334
1. Hoists 334
2. FlusAing assemblies 389
3. Power equipment 396
4. Lorering and lifting equLpdent and tools 393
5. Drilling derricks and masts 419
6. Drilling tools 431
Ch. 5. Equipment for Well Sealing, and for Gathering, Storing, and
Transporting Petrolew and Gas 455
1. Equipment for gathering petroleum and gas 455
2. Equipment for storing petroleum at field gathering stations
and tank farms 466
3- Pumi)s 485
Card 3/4

DARMPLTAN, A.A.
Develop automatic control In oil ?Ield production. Bezop. truda v
prom. 3 no.11:8 N '59- (MIU 13:3)
1.1),%Lraktor Azerbaydzhanskogo nauchno-istledovatel'skogo instituta
neftyanogo mashinostroyanira. on methods)
(Oil fields--Producti
(Automatic control)

A tj
ABRAMOV, N.A.; AL.IVMWIZALE. K.S.; AMIROV. Te.K.-, ARENSON, R.I.; ARSUITRY,
$.I.; BAGDASARoir, R.M.; BAGDASAROV, G.A.; BADAKTANTS. A.A.; DAKIM
LTAN, G.N.; D2R&FAROV, A.A.; XAZAK, A.B.; EMCHNNSKIT, X.M.; KOXYU-
KHOV, 3.1,,; KRLSNCBAYEV, A.V.; KIM OVSKIY, A.I.; 1-11-AZAROV, G.S.:
LARIONOV, Te.P.,- LISMURTIN, M.Te.; LIVSHITS, B.L.; LISIKTAN9
X.A.; LOGINOVSKIT. V.I.; LTSWOVSKIT, P.S.; MMCHANOV, G.V.; MAT-
DMIKAH, N.M.; CKHOHIKO, S.K.; ROKANIKHIN, V.A.; ROSIN, I.I.: XU-
STAMOVI E.K.; SARKISOV, R.T.; S1MTPHIK, P.I.; SOBOLEV. N.A.; TARA,-
TUTA, R.N.; TVCROGOVA. L.H.; TER-GRIGORYAR, A.I.; USACH&V. V.I.-,
FATH, B.P.; CM.CHEROV, L.G.; SHAPIRO, Z.L.; SHKVCHUK, Tu.I.; TSUDIK,
A.A.: ABU040Y, P.M., red.: HARTTHOVA, M.P., vedushchiy red.;. _DAfijTXr_-.
LTAN, A.A,; TROFIMOV. A.V., tekhn.red,
(Oil field equipment; in six volume] Neftionoe oborudovanie; v
shesti tomakh. Koekva. Goo.nauchno-tekhn.izd-vo neft. i gorno-
toplivnoi lit-:-y. Vol.3- (Petroleum production equipment] Obo-
rudovanie i Inetrument dlia dobychi nefti. 1960. 183 p.
(MIRA 13:4)
(Oil fields-Equipment and supplies)

DANIYELYAN, A.A.
New designs of the Azerbaijan Research Institute of Oil Machinery.
Ifel'tyianik 5 no.9:2j 5 16o. (MIRA 13:9)
1. Direktor Asitmasha.
(Oil fields--Equipment and supplies)
@Ix 11

DANHELYAS, A.A.; DADASHEV, B.A.
Oil well tubing standards must further the mechanization of
oil field operations. Neft. khoz. 38 no.10:26-28 0 160.
(MIRA 13:9)
(Oil welle-Equipment and supplies)

DANIYELYAN Armais Avakovich; OSIPOV., K.G.., red.; SOLGANIK., Ms... ved.
I @@@
red.; POLOSINA, A.S., tekbn. red.
[Drillhig machines aM machanisma) Burovye mafihirq i mokhanizmy.
Izd.2., dop. i perer. Moskvap Goo. nauchno-tekhn, izd-vo neft. i
gornD-toplivno:t lit-rys 1961. 470 p. (MIRA 14:11)
(Oil well drilling-Equipment and supplies)

DAIJIYELYAN, A.A.; ADAMSKIY, V.V.
Specialized transportation centars for movable oil field equipment,
Neft. khoz. 39 no.5:53-56 My 161. - (MIRA 14-9)
(Oil fields--Equipmont and supplies)

KERSHEVBAUM, Yakov Markovich, prof., doktor tekhn. nauk; YUDOLDVICE,
Mark Yakovlevich
,, inzb.; DANIYBLTAN#--A.JL.9 kand. teklm.nauk,
zasl, Anzh. Azerbaydzhansli8y -SSR, r;tsenzent; SOLGANIK, G.Ya.,,
ved. rod.; POLOSINA, A.S.j tekhn. red.
(Repair and assemb3y of oil-field equipment] Remont i montazh
neftepromyslovogo oborudovanila. Moskva, Gos.nauchno-tokhn.
izd-vo neft.i gorno-toplivnoi lit-r7, 1962. 395 po
(MIRA 15.1)
(Oil fields-Equipment and supplies)

SHATSOV., H.I.; RAKOVI F.P., inzh.,. AvEnsOV, A.A., inzh.; DAMIFT-YA t-A-A4
BERLIN, S.G.; GLYADKOVAO V.I., starshiy tekhnik; TURASIX, G.Te., inzho
Standardized oil well drilling terminology. Neft. khoz. 40
no.5:66-69 My 162. 04IRA 15.9)
1. Gosudarstvannyy komitet Saveta Ministrov RSFSR po
koordinatsii nauchno-iseledovatellskikh rabot (for Rakov).
2. Voesoyuznyy nauchno-issledovatellskiy institut po tekhnike
bezopasnosti v neftyancy promyshlennosti. (for Avetisov). 3. Azer-
badydzhanskiy nauchno.-issladovateliskiy institut neftyanogo mashi-
nostroyeniya (for Daniyelyan, Berlin). 4. Bashnefteproyekt
(for Glyadkova)- 5- Gosudarstverinoye ob"yedineniye Azerbaydzh&-xkoy
neftyanoy promyBhlennosti (for Karasik).
(Oil well drilling--Terminology)

.DANMLYAN,_A.A.; IBRAGIMOV, E.S.; KMEAMOV, N.G.
Basic trends in the over-all mechanization of extradeep well
cementing. Azerb.neft.khos. 41 no.8t4O-44 Ag 162.
(MIRA 16si)
(Oil well cementing)

DANTYELYAN, A.A.; ALIVNIIDIZADFt F.S.
Basic trends in the construction of units for underground repair
of wells. Neft. khoz. 46 no.8:49-56 Ag 162. (MIRA l7s2)
,.:I-

TER-GRIGORYAN, A.I.; DAYIYELYAN, A.A.; SHAPIRO, Z.L.
&juilverit for the hematic nealing of tLe wroll head in door.,
drilling. Neft. khoz. 41 no.2:19-25 F 163. (MIRA .171:8)

DANIYELYAN ; KASIYAN, T.V., spets. red.
[High-efficiency machining of parts on coViing lathes]
IlysokoproluoditelInals. obrabotka detalei na tokarno-
kopirovallnykh stankukh. Erevan, Aiastan, 1964. 99 P.
(MIRA 18:9)

GHOLUMTAN, D.Po@-,VA1TITZ1XU.--Ajh.
Studying the process of fertilization and the initial stages of
embryogenesis in corn pollinated by different methods. Izv. AR Arm.
SSR Biol. i sellkhoz. nauki 11 no.6t57-67 Je 158. (MIRA 11:7)
l.Kafedra Darvinizma i genetiki Terevanskogo gosudarstvennogo
universitsta,
(corn (maize)) (Fertilization of plants)

WITEILTAII, A.Kh.
Studying the initial phafles of embryogenesis in corn. Nauch.
trudy grev.un. 64:203-206 158- (MIR& 11:12)
1. Kafedra darvinisma i genetiki Terevanskogo gosudaretvennogo
univeraiteta.
(corn (maize)) (Fertilization of plants)

DANIXKI,)Mp A.Kh. _
Effoot of various pollination methods on certain stages of
embryogeny In corn under conditions prevailing in the Ararat
Plain. Nauch. trudy Erev. un. 69 Ur. biol nauk no. 8:155-r160
pt. I r0- (MIRA l4s4)
1, Kafedra. darvinizma i ganetiki Yerevanskogo gosudarstvennogo
i4iiversitata.
(ARARAT REGION-CORN MEEDING) (BOTAn-EmBRYoLor-Y)

DANIYELYAN A
. Kh.
Embryological study of the process of fertilization in tobacco in
Karao District. Izv.AN Am.SSR.Biol.nauki 15 no.7:67-69 Jl t62.
(MIRA l5tll)
1. Kafedra darvinizza i genetiki biologicheskogo, fakullteta
Yerevanskogo goeudaretvennogo universiteta.
(FERTILIZATION OF PLANTS)
(KAM3 DISTRICT-TOBACCO)

DANIPLYANP A.M.
Rezanie metallov i instrument. Moslcva. hatshb-iz., 1950. 450 P. illus-
Bibliography: p. U5-(40).
Metal cuttin.- and the tool.
DLC: TJ1230.D3
So.- Manufacturing and Mechanical Fmgineering in the Soviet Union, Library
of Congress) 1953.

aR. A.
ITSS, 1)1)
2. 1
in ',x-r-lillill HP-1110 of i n Dec
o L.
CO.-TititiO-1 Of l,,-,for7:i-,.I-)n of the USSR '-'.ichine nnd birtchino inwlutry
Contained in So-,,Ir,t Publicottionn.

@FJWIYGLY A4, A. Ni -
PHASE I TREASURE ISLAND BIBLIOGRAPHICAL REPORT AID 438 1
BOOK Call No.: AF637182
Author: DANIYELYAN, A. M.., Dr. of Tech. Sci.
Full Title: EFFECT OF HEAT AND THE WEAR OF TOOLS IN THE METALi
CMTING PROMS
Transliterated Title: Teplota i iznos instrumentov v protsesse
reZaniya metallov
Publishing Data
Originating Agency: None
Publishing House: State Scientific and Technical Publishing House of
Literature on Mechanical Engineering
Date: 1954 No. pp.: 276 No. of coPlez! 5,000.
Editorial Staff: The author acknowledges the collaboration of
Pevtsov, 0. it., Kand. of Tech. Scl., Leontlyev, A. A., Maslennikov, V.0.,
Levin, L. M. and Lider, V. Ya.
Text Data
Coverage: The book deals with problems of heat phenomena occurring in
the cutting process, deformation of the metal in the zone of cutting,
and the abrasion of the cutting tool. The author points out the im-
portance of the heat effect on all main phenomena of the cutting pro-
oess: deformation of metals, friction coefficient, cutting tool
pressure, durability of tools, surface conditions, etc. He describes
numerous tests carried out by Soviet metallurgists and bases his con-
1/3

Teplota I izrios instrumentov v protsesse rezaniya metallov AID 438 - I
clusion3 on data obtained from these teats. Ch, I discusses factors
affecting the deformation of the metal tooled: elasticity of the
metal, cutting speed, shear thickness, angle of cutting, metal
hardening,, shrinkage of cuttings, deepness of recessj etc. Ch. II
analyses and evaluates various methods of measuring the cutting
temperature. These methods are divided in three groups: (1) analyti-
cal methods; (2) indirect methods of temperature measurement relating
to colors of heated metalts, use of fusible agents, residual effects
of temperature on the structure of the material of tools, traces of
deformation left on the working surface, and calorimetry; (3) direct
methods of temperature measurements: methods of thermo-couples and
the radiation method. Ch.III gives general Information on abrasion
of metals, special features of the abrasion of cutting tools, methods
of abrasion testing and a review of the most important Soviet papers
on the subject treated. Ch. IV describes tests carried out by the
author and other Soviet mechanical engineers in order to establish
rules governing wear and heat factors when different kinds of tools
are used. Ch.'V discusses factors affecting the abrasion of cutting
tools: cutting speed, tem 'Derature, cooling, shape of tools, etc.
The book is a result of experimental research conducted by the author
over a period of years. It contains data on practical technical
2/3

Teplota i iznos instrumentov v protsesse rezanlya metallov AID 438 - I
application. The wear formulae presented in this book were proposed
by the author in his previous works. These formulae have been criti-
cised by M. I. Klushin in his Metal Cutting (Rezanlye metallov),
Moscowo 1953. A reply to this criticism is given on pp. 2b 4-20b Of
the present volume.
TABLE OF C ONTENTS PAOES
Foreword 3-4
Ch. I Deformation of the Metal in the Zone of Cutting in
Relation to Conditions of Cutting and the Tool
Contour and Size 5-29
Ch. II Heat Phenomena in Metal Cutting 30-95
Ch. III Wear of the Cutting Tool 96-128
Ch. IV Determination of Wear Conditions and Temperature
Variations for Different Cutting Tools 129-262
Ch. V Variations In Cutting Speed with Relation to Wear
and to Temperature . 263-273
Purpose: The book is intended for engineers of metal cutting plants,
scientific workers, teachers and "Aspirants" of schools of advanced
studies in mechanical engineering.
Facilities: None
No. of Russian and Slavic References: About 20 bibliographical footnotes.
Available: A.I.D., Library of Congress.
3/3

POD' 1YRIOMCHIKOVA, Yelena Koustaxtinoyna; DABIYELYAN., A.M., doktor tokhai-
kaididat tokhai-
cheskikh zauk, professor, retseszoot; , * ';adaktor; OLADKM.
aixeskikh sank, dotsaikt, redaktor; SWOROVA, I.A.,
N.N., tekhaichookiy redaktor.
(Highspeed millixg of grooves by slab mills] Skoreettee froserevanie
Pasov diskovymi freizami. Moskva, Goo.izd-ve obor.promyshl. 1955.14op-
(KilliAg machiaes) (KLRA 9:5)

DANIYRLYAN, A.M., doktor tekhnichenkM smak, professor.
Effect of the ground. shop* of twist drills on cutting temperatures
and forces. Vest.mash.35 ne.11:48-51 N 155. (MLBA 9:2)
(Drilling amid boring)

@22-1-11/34
AUTHOR: Daniyelyang A.M.@ Doctor of Technical Sciences, Professor.
TITIE: The heat balance in the cutting of the titanium alloy
BT2 (Teplovoy balans pri rezanii titanovogo splava VT2)
.t?ERIODICAL: I'Vestnik Mashinostro-Teni all (Engineering Journal),
I!_1
1957, 11001, PPO 39 - 43@U-*S-S.R.)
ABSTRACT: Reference is made to the author's recently published work
on the analysis of metal cutting processes by their heat
balance and on the study of the cutting temperature as the main
factor in machinijig. ("Teplovoy Balans Pri Rezanii Metalov"
published by AN SSSRI 1955.) Bxperiments with the machining of
a titanium alloy by tungsten carbide tipped tools are reported.
A hollow cylindrical blank was clamped through a plastic cone
for thermal and electrical insulation. The tool was also
insulated. As in earlier work, the heat in the tool tip was
measured by allowing the chips to fall into a calorimetric
device. The temperature in the cutting zone was measured by
usinS 'the insulated blank and tool as a natuial thermo-couple.
The total heat was determined by measuring the vertical cuttLng
force component and computing the power put in by the work
spindle. The test results are plotted against the speed of
cutting. The chip and cutting tool temper.;itures are compared.
Card 1/2 The heat removed by the chip is larger in steel than in
I

88651
S11231611000100110061015
AOO5/AOO1
Translation from: Referativnyy zhurnal, Mashinostroyeniye, 1961, No. 1, pp. 19-20,
1B176
AUTHOR:
TITLE: The Thermal Balance at Cutting of Steel
PERIODICAL: V sb.: "Teplovyye yavleniya pri obrabotke metallov rezaniyem".
Moscow, 1959, PP. 106-126, 6
TEXT: The test@ have been conducted with hollow cast steel ingots of 40)(
(4OKh) 68 kg/mm and HB 190) grade. In the high speed range (v > 70 m/min)
the cutting was performed with the one-piece hard-alloy cutters of the T60K6
(T6OK6) make, in the low speed range (v < 70 m/min) , with one-piece high-speed
cutters of the P18 (R18) make. The cutting temperature was measured by the natural
thermocouple method. The calorimetric method was used for determining the average
temperature of the chip, the cutter, and the processed part, as well as the heat
supplied to them. The experiments were carried out under various conditions but
with equal cutting duration. It turned out that 82% of the total heat amount is
supplied to the chip at the cutting speed range up to 400 m/min; a further in-
Card 1/2

88651
S112316 1/0w/00 1/006/015
The Thermal Balance at Cutting of Steel A005/AOOl
crease in the cutting speed leads to a decrease In the percentage of heat In the
chip (at v = 700 m/min it Is 7C%) ; the heat percentage in the work piece decreases
for increasing cutting speed from 20 to 350 m/min; for a further increase of
speed, the heat percentage in the work piece increases; an insignificant percent-
age (0.7 - 8%) of the total heat amount is supplied to the cutter; the heat
percentage In the cutter decreases with the cutting speed increasing from 10 to
600 m/min, for a further cutting speed increase, it increases a little.. The
average percentages are given characterizing the heat balance in turning the steel
4OKh at the cutting speeds 20 - 50 and 100 - 350 m/min. - There are 16 figures.
I. Bernshteyn
Translator's note: This is the full translation of the original Russian abstract.
Card 2/2

S/12 6110001012100fl/0C 7
D040YD112
AUTHORS: Daniyelyan, A.M., and Bobrik, P.I..
TITLE- Peculiarities of the heat phenomena in cuttinG refractory
alloys
PERIODICAL: Stanki i. ins-.rument, no. 12, 1961, 25-.27
TEXT: The article describes an experimental investigation of the heat bal-
ance, i.e. the amount of heat absorbed by the chip, tool and workpiece
(0-chip, Qtool, and qworkpiece), in cutting ."N867 (EEI667) and"P827 (EI827
refractory alloys, which possess great mechanical strength, particularly at
high temperatures. Solid cutters ofBK.8 (VKS) alloy were used in the tests,
The total amount of liberated heat was determined by the value of the work
expended in the cutting process. A dynamometer was used for measuring the
tangential component of the cutting force; the force component in The fef-d
direction was ignored in view of its insignificant value.. Qchip, Qiool arid
qworkpiece were determined by measuring the temperature of water in calori-
meters of different shapes and sizes. The effect of the feed, cutting Fpeed
and cutting depth on the heat balance was studied in three SeDarate serie?
Card 1/5

S/121/61/000/012/005/007
Peculiarities of the D040/Dl12
of experiments. IncreasinE the cutting s eed,ihcreased the proportion of
&
tool in both alloys, although the
Qchip and reduced that of workpiece and
absolute values of all three components increased. At low cutting speeds,
the quantity of heat absorbed by the chip was above 40%, a fazt not previ -'
ously mentioned in the literature. Increasing the feed also increased the
proportion of Qchip, which was partly due to the diminished .'-ontal-t are:'@
between the chip and the cutter, but the absolute values of Qtool and Qw.-.rV-
piece also increased. The cutting depth had less effect on the heat balenc@
expressed in % than either the feed or cutting speed, t-ut increasing th.-
cutting depth increased the absolute values of Qchip, Qkool and Qworkpie;-.e
to a much greater extent that increasing the feed or (;utting speed. Ii is
pointed out that the values of Qtool and '4workpie,,@e expies@-.-d in % xere
times higher for the EI867 and B1827 alloys than for the B14')7 refrart,,.,.*f
alloy. Conclusions: (1) The high percentage of heat iransierred to lh@?
workpiece and the cutter is characteristic in cutLinE E162-( And E1867,
Low cutting speeds must be used in view of the high outting temperature
recorded in the tests (2--4 times above the temperature reactled wl-en c-atting
machinery steels)e (3) The proportion (and absolute quantity) ()f
Card 2/3

Peculiarities of the ...
S/121/61/r,00/012/005/007
D040/1)112
transferred to the chip, :rises abruptly when the feed and cutting- s@,eed are
increasedi (4) The heat balance for the EI827 and EI067 alloys may b-,
characterized by the following mean values when s @ 0.12 mi:i/rkiv and
mm):
Heat transfer
Amount of heat in at v (.in m/mir,.
3
Into the chip 25
Into the workpiece ... 45
Into the cutter ... 30
35
20
(5) Measures have to be ta.,:en to lower the temperature in t,,,e cut@inj zorie
e.g. by cooling. There are 7 ficures and 3 Soviet ref'er@'ncej.
Card 3/3

3/121/62/000/006/010/011
1)040/1)113
M Daniyelyini, and Gritsayenko, Yu. A.
AUTHL
jn.;trui.,.ent,
no. 6, 1962, 43-44
r In Zcbroav@- -11962,a conference was heLd ill Moscow by the Moskovskoyc NTO
-(IA)Pl'0'J (Moscow NfO ,,'ashpro,ti) arid the Aoskovskiy dom nauchno-teldinicheskoy
propa-ai-.03- iiii. Z.i@. Dzk@.rzhinsko,,o (Mo!icow House of Scientific and Technical.
Propaganda ini. Z.Z.I)zex-=hinskiy) to discuss the development of the use of ultra-
3011iC VibratiOll ili LlCtiLl CUttilg. ;even reports heard attlic conlerence are re-
viewed and the work doiic by dif ferent organizations outlined. Generail;-, rejearch
st@cm.s to be ill the clilbryo sta@,,c, arid any final rccoiiiiiiendatimis for industry are
az@ yet _,,,-,Possible. '.Io:it experiments were conducted at low cutting speed. The
proper cutting speed ran-c arid the effect of ultrasonic vibration Oil the size
of plastic dcfon;tation, the wear arid durability of tools, the cutting force arid.
tci.@pevature, the strain hardening of metal ill the cutting zone, machining accu-
racy, surface finish, optinium vibration frequency and optimlmi wave orientation
Card 113

j/1 "1/62/000/006/01.0/011
Vibrational cuttin- D040/D113
0
have not yet been clarified. No instmunents are yet av4ilable for measuring the
real para@iicters of ultrasonic vibration in the cutting procelis. TSNIIT.',R3h
experimented with vibrational turning of 1)(18H 9T (1KUSM) steel; increased
durability was observed only at certain vibration aniplitudes where vibrations
occurred aL ri,,ht an-Le.,; to the tool surface subject to the highe6t wear. Netal
@u;:iperature in vibrational cutting was higher than in conventional cutting, the
chip shriiika@;e was halved, the rican cutting effort reduced, and the work surface
finish Luproved. The scune was observed in turning and reaming 2 other steels
an,d the ET 2 (VT2) titanim alloy. Data compiled by MVTU iiii. Bauniana (WTU ii.i.
Babman) showed that the life of drills in drillin.- holes in nuts of stainless
.-iteel wa; trebled; even better tool life was observed in cutting heat-resistant
stoclb with high-speed steel cutters when the vibration was perpendicular to the
work surface, and the vibration amplitude was low (JoIL); frequencies and
below 500 Cp-, III, wop't with hydraulic and electrohydraulic device-L
pemiitted dependable.splitting of chips and reduced the cuttin- effort; the
tei,iperature dropped in certain cutting conditions. The Tullskiy mekhanicheskiy
@titut (Tula Mechanical Ln.-ineerin-g Institute) could raise the feed of drills
Card 2/3

DAHIYELYAN A 14. dok-t4r_tekhn*naukj prof., zasluzhennyy de,,atel' nauki i
j --9.- --
- RSI-'3R; PARSHIN, I.F., kand,tekhr..nauk, dots3nt
Effect of the material of the cutting part and the cross section
of the cutting tool on thermal deformations of the @ool. Trudy W.TI
no.5'3-'5-7 162. (HIRA 15,.6)
(Metal-cutting tools-Testing)

@oo
ho6h4
S/536/62/000/053/001/002
1048/1248
AUTHORS: Daniy@@A.@@4., Doctor of Technical Sciences, Prof., and Bobrik. 11. L. Candidate
of Technical Sciences, Docent
TITLE: Some problems of the physics of cutting of refractory alloys
PERIODICAL Moscow. Aviatsionnyy ickhnologicheskiy institut. Trudy, no. 53, 1962, lsslcdovanlya v
oblasti mckhanichcskoy obrabotki mctallov 8-22
TEXT: Physical phenomena associated with the cutting of a Ni-Cr-Al alloy (alloy A) and a Ni-Cr-Al-Co
alloy (alloy B) were studied, The hardness of these alloys increased after application of high pressures, e g.,
the hardness on the surface of a Brinell identation impression (3000 kg. load) was 9-12 Rockwell units higher
than that on the remaining surface of the specimen. The force required for cutting increased with increasing
rates of feeding and was generally 2-3 times as high as that required for the cutting of conventional con-
struction steels. The cutting force decreased sharply with increasing cutting velocity. The cutting temperature
was 300-400' at a cutting velocity of 2-3 m./min., and 1000' m./min. The main factor affecting the cutting
temperature was the cutting velocity; the rate of feeding and the cutting depth %%ere of little importance
The relative aniounts of heat transferred to the specimen and the cutter decrease, while that transferred to
the shavings increases with increased cutting velocity. Sample values for the distribution of the heat evolved
during cutting at a velocity of 3-15 m./min., a feeding of 0.12 mm./turn, and a cutting depth of 1.5 nini are
to the specimen 45%. to the cutter 30%, and to the shavings 25% of the total. There arc 22 figs. and 2 tables
Card 1/1

DANIYELYAN.,-,A..M.,, GRI,.rsAysNKO, Yu.A.
Utilization of vibrat'ions in machining. Stan.1 Instr. )3
no,6:43-44 Je 162. (MIRA l5s7)
(Metal cutting-Vibration)

Fryj "M rZIR

3513-66 EWT(m)/WA(d)/Ee(.t)/WPk)/EVP(%)/94P(b) IJP(e) JDIJO
AM5019283.' BOOK EXPLOITATION Uk/
UDK62l00s669.l4.Ol8*'44
DgniyelXan, Arutzum Mkrtichavich (Doctor of Technical Sciences; Pro"4A
fesmor);--nYtIR -7PWF`2VVWRVrW.- Curevich YAnkell Leybovich;
YEnorov Ivan Sar w evic
e il_(c b r aot
.,Machi in eat-reisistant:st el, alloys and refractory metale
re'zaniyem zharoprochnykh staley, eplavov i tugoplavkikh.-.metallov)
Moscow, Ixd .vo It MashLnostroyeuiye"; 1965. 306 p. illus., bLblioq
Errata slip Inserted, 5700 'copies printed,
TOPIC TAGS$ machining, heat.resistant steel machining. refractor
metal machining,.hent.resistant alloy machiningo titanium alloy
machining, beryllium machining'# rare metal machining *,-,7
2@7
P ANWCOVERAGEt This book is into d4d for engineering personnel
URPOSE
of machine-obuilding plants, scientific research institutes, and
."I engineering design bureaus*- It may also be xseful to students.of
schools of'higher technical education specia-lizing in technologys
The book ravLe.,Ws.specific-technological features and aspects of
various procedures ..of - mach in in 9 he a t-re a I a t a* tand refractory metals
Card 114

AM5019283
dnd'allo@s* In P*Arttcultr@ Li deals with metal turning, milling-
boring, threading, and broaching,, Suggestions are made on the
selectiqn of moiterials,used for contact surfaces of tools, tool
shapes, and efficient m4chining conditions, It also presents an
analysio,of thermal 'pheuomenajobserved'@n t1i process of machining*
TABLE OF CONTiNTSt
V,
Foreword '3-
Part le ftesent Heat Resistant HateriAls and C I as a L f L c a tion Based 'on
Their Hachinability (Ya. L. Gurevich),--, 5
Part" 110 Certain Physical Pvoblems@of Machinieg Heat-Risistant Steel
...and Alloys-(P*.Jb B6brik) 23
Cit. 1. Analyising the "Thermal' Yield and Calculating.the Machinlng@
vo -23
Temperatu
2/4"
,cc

Ch. 7. Tbr 195
_qading%
l @
Part V, Hach
ining of Refractory an@ Rare Hitals
(Z,fSo _Yegorov)
212@'
@h. 1. , Haiu@Physical,.'HechauLcal and-Ch emical-propeiti 8, of Rare and
Ref ractory, 11stals. -'212
77,
Ch. 2.' HachiuLng-.Re f ractoiy- Metals 2 116-"-
Ch. 3,

SUB CODE: Hk - - "Idam TED t ,",- A 7H&t6 5;`i_@ 140 REF @SOVs Los

%i .
OTHER: 35

3"

car -

1
0
104

77

e@lmlmg@"

- ofm Ielaw
0 c
tN Abd
2,rLrkj
S!P7
73.) no
Vm
Vol, ai N4.41i wovember, 1K PP.MS-M,
, ;. 7

1. I)AIITYMYAN...7 6. 0.
2. ussR (6oo)
4- Wine and Wine making
7- Yore about so-called "trifles," Vin. SS3R, 12, No. 1, 1953-
9. Monthli List of Russian Accessions, Library of Congress, I%prfl. -1953, Uncl.

MINMYAN, Sh.j DATTYAN, E.; DANIYELYAN. E.
High-speed mining of a crosscut at th6 Kafan Copper-Mining
Combine. Prom.Arm. 4 no.6:48-52 Je 161. (MIRA 14:8)
1. Sovnarkhoza Armyanskoy SSR (for Minasyunj Daytyan). 2.
KafanskJ.y mednorudnyy kombinat.
(Kafan-Copper mines and mining)

DAVIYELYAW, Me.; STRELILIKOVA, V.G.
- -
Cwes of mycosia caused by the fungi Ilicrosporun [,,Ypseum and
Microsporum lanosum. in Erivan.Zhur. eksp. i klin. mod. 3 no.l:
105-108163. (I-MU 16:10)
le Yerevarskiy gorodskoy kozhno-venerologicheskiy dispanser.
(ERIVAN - MYCOSIS) (ERIVAI; - raCROUCRUM)

DANIYELYA.N, E.Ye.; MIRAKYAN, M.Ye.; AYRAFETYANP M.A.
Occupational skin aspergillosis. Vest, deria. i ven. 38 no.4:83-
85 Ap 164- (MIRA 1814)
1. Kafedra kozhnykh i venericheskikh bolezriny (zav. - dotsent
G.D.Ter-Grigoryan) Yerevanskogo meditsins@ogo Instituta i Institut
gigiyeny truda i professionallnykh zabolev&niy (dir. R.A.
Aydinyan) Ministetstva zdravookhranenlya Amyanskoy SSR.

DANIYELYAN, E.Ye.
Fungi and epidemiology of triobomycones In the Armenian S.S.R.
Vest. derm. i van. 38 no.lOt48-51 0 164.
(MlRA 18:71
1. Kafedra kozhnykh i venericheakikl, bolezney (zav. - dotsent
G.D. Ter-GrIgoryan) Yerevanskogo meditainakogo instituta.

FILATUVY V.I., doktor med. nauk,--DjXLjXELYtN, FA
a_ __ __,
Role of the blood and blo-d substitutes in the rrophylaxis and
treatment of burn exhauntion. Probl. gerzt. i pa-rul. krovi 9
no.9.-22-25 S 164. (INIRA 18:7)
1. Khirurgicheskaya klinika (nachal'nLk - prof. T.Ya...'irlyev)
Voyenno-meditsinskoy ordena akademii imeni S.M.Kirova, Lenin-
grad.

CtYIJSYATI, R.R.; MIYELYM, F.D.
New and rare 8pecies of bats in the Annenian S.S.R. Izv. AN
A-m. SSR biol. nauki 16 no.8tl.13-IIJ+ Ag163 (MIRA 17:4)
1. lAkILLI Vl-rvvanflr-oUo gosudart3tvennogo
ul@2ivcvnituta.

Mechanism of reproductive isolation in nome forms of Lacerta
Bax.lcola Evernmann occurring In Armenia. Izv. AN Arm.SSR.
Biol.nauki 19 no.10:75-80 0 165.
(MIRA 18:12)
1. Yerevanskiy govudaratveruiyy universitet, kafed-ra zoologil.
Submitted December 2, 1964.

DANIYSLYAN G inuh,
Ways of saving electric power in hydroelectric power plants.
Prom.Arm. 5 no.11:1,7-1,9 N 162. (KTRA 15:12)
(Armenia-Hydroelectric power stations)

DANIYEILYAN, (-,. A.
Dai-dyely-in, G. A. - "Tho 'L.@itlal plate in.fresh in.;'urieo (A' `v nd
31@ornd@ i@..uch. Lrudov (ln-t .;@ "(@ rol Lya ""'lk. ]-hirtarf,. lldird@,a
Ye-revan.31:. i@.cd. In-ta), _L11, 1G48, 1). 111-27
SO . 'U-!+3355, 1/1 hu:--uot --3, ( '@ I @'. I I rrn:.@' I I :I @-@ :11 @. 'I -.I t':.y' :.o. lf'll' I @."C' . )

DANIYZ1,Y,-0-,', 1. A.
"Initial Plastic and Reconstructive Operations in 'Fre3h' Injuries to the
I
".1rist and Fingors.11 Cand Med Sci, Yerevan 11,11edical In3t, 15 Dec 54. (K, 5 Dec 54)
Survey of Scientific and Technical Dissertations Defended at 1U3SR Higher
Educational Institutions (12)
SO. Sum. No. 556, 24 Jun 55

DANIYELYAN, G. A.
"-Early Clinical Roentgenological Diagnosis of Cancer of the
Esophagus and Certain Precancerous Conditions." Cand Wt Sci, Yerevan
State Medical Inst, Yerevan, 1955, (KL, No 11, Mar 55)
SO: Sum. No. 670. 29 Sep 55---Survey of Scientific and Technical
Dissertations Defended at USSR higher Mucational Institutions (15)

FANARDMITAN, V.A.; DAMT&LIM.. Gr.L.
Differential X-ray diagnostics of stomach cancer. Izv.AN Arm.
SSR.Biol. i sel'khoz.nauki. 11 no.12:39-47 D 158.
(MIRA 12:2)
1. Terevanakiy institut rentgenologit i onkologii Hinistorstva
7,dravookhraneniya ArmSSR.
(STO14ACH-CA11CHR) (DIAGNOSIS, HADIOSCOPIC)

ivy Lk AN
N. ,y
434 m c@u@WI,Ioftl Tl@ --- AM US-
0 V&f"s rh_01911cal "" m 1~-Or
F A JAN W A PAO-41 11 A, M,
R
n
`
AN
I
3-1-1

A N I F
D
J
AN
G A
@
J

..&, IN, -1... .1
At...h
.1 -11 a-.4

J.-M-A-
oi@

".w., wow
A6,, t], -6 M

rk -4 1,. . III WAA,
@-l P.- a--
:
4:6 4-., lI, d.

III ILI -6.
=
A
P..d- 04 off$ I,, I.& Tu J.- . III.

TV. .4.r.ok.ft,
Z.A.W Zv.
0. 6.

P--
=

I A-k-14 -.1- 4 111. W- ILI, W pl.l-
d
:@
L.IIIoi, .w - 6. A..'&
F-W. .0 OW 4-&- 1%. w&4 P-) -1

C-k-- -4 111 111 is -1. "6. .1 a 1 3 .1 lu ff- A.

IIIift
.6-4 M ku -My a I" .A.

T6 4-"" 6-4 - - -.p 1. 1-11
P-*.ft At,,;rd
"
. L 4,=
t
A, n
;=,
=
=

sovb" Alf= S.A.4-4
1--or" A "
am ft, A-M.IX W-k.(C-Ik DI-4-
MAN A M 5NrGIfAt
#0.4
AA 4.
7%. -W ..4 lII-",.,4.1-,. 01- ,1111-9
A III
F,4k-
mrmr-t G A tf&
UNZNARAI IN L D
G A LJl,I, i,,,d
AW I- 11111111-` 4 'U -4
&1-4 TL. -kk d 111,1 -5,
owII
TU h"l- -d W' 'II"
h--d
A.
Tu
of-&-
3n
tm at, laterrAtiorAl conMes at padialoo, minich, 23-30 MY 1919-

FANARDZHYAN, V.A.,, prof. (Yerevany ul.Dzhrashatq go); DANIYELYAN, C;.A.,,
kand.med.naul-
Functional changon in the gaitrointootinal system under tha
action of proserins. Vest. rent. i rad. 35 no. 5:6-11 My-is
160o - (MIRA 14:2)
1. Iz kafedry rentgenologii i meditsinskoy radiologii (zav. -
prof* V.A. Fanard7liyan) Yerevanskogo meditsinskogo instituta
(direktor - prof. L.B. Arutyunyan).
(ALIMNTARY CANAL) (NEOSTIGIMNE)

PANARDZHYAN, V.A., prof.;_PpI-=XAX,-4r-A., starshiy naucbnyy sotrudnik
Modern state of X-ray diagnosis of stanacb cancero Toperentol,
otk. 6t233-241 161, (MIRA 16:2)
(STCHACH-CANCER) (DIAGROSIS, RADIOSCOPIC)

DARYMAN, G&A*.q kandomedtnauk
Plastic surgery of the large intestine in gastrectomies neces-
sitated by cancers Vbporent.i onk. 6t243-W 161.
(MIRA 16:2)
(INTESTINES--SURGM) (STCMACH-CAMER)

FOARD.-HYAP, V.@., prct,.,, vAP.,Y, G'I.A.,
Y-rfty J @, of .@.,tn', V-@,, j_ i . - ,, to
16.1 flITT'A

FfiN Art 0 'RVAN 'J,A. I , . -@ - 1 , .
, .'.' : ' '..' @:' . - . , . ! - '-'i -(-
... - -1. 71: -
G.A.., kan@ r.; - - ;'r.
De i I or: i i I -@j 4 (-,.. , "1 1 yj t I @, t . - -sj , i I_ ! - , q' , ,@ -1 ..: 'i ,'a r. .
Vop. rm!. -. ? C, ` f - ':,- -, ;.. @
,. . . . , .' ..' . I @ I I
I I

DMUMUN, G.A., xLnt,4. jtj-a,j, AY:i@ !. "'
I
!N 1,.erlo@zve bi th-@-. (,f z--*tl:'nT-.-" _;,1- i'll'.il lk".
rent. i fr'k. 7 44"J"i--'*7 i If-; *, -" %I i. @? t.- I)

L I'-. LL i -Fr -.Y . 1, .!. f , , . i. @ I , . I . ': ) * - I . I . 1. 1 @ - ,
I t
A.Ao, -nlp-,-@ .-,- '. -, - -1 , - . ...
Non . pz :,' j -' j-. 4 -.. -', t, @, -. 11, . !,-*Lov@ : , , - - - * , : . 7 , - I - . ., I I
I j . 1 1, . _
I i I I . I . . t ,
T@-,M, @ .:r,k. 1.'. 1., . I , .,

DMI-AMYAN, G,A.,kfL-id. med. nuok; YF.Kin, M131, nq@.,k
VSlUe Of P,%lllhA'Vd In of lft@2 g@o-trc -. in -t e!-% 4 -:--1 a,
tract and tb,-- paricreaeo Vopo rant, I ork. vb3'
(111RA

DACNIZZLYPI1 G.A.
RoplaeorloIlL of tile ;to,,;aC i jr, I iws wnd lotal gaz;ttrectumies
with a yortior of tho trarsvt-roc- c,Jon. 1@',-,Irur.-Iia -10 no.9t24-Z7
S f64 11082)
otdeler.1ye (z,iv. G.A. 113.-ILituta
rentgenolot"11 1 mkologit ;hlur* L AM,
IISSIL pi-cf. V.A. !,'zu;ardzhyaji) AN Arrp-t.fikoy &-f-1,

DANIYELYAN, G.A., kand. med. nauk
Formation of an artificial stomach from a segment of the transverse
colon following gastrectomy for cancar. Vest. k-hir. 94 no.2:108-IrI9
F 165. (MIRA 18:5)
1. Iz khirurgicheskogo otdeleniya (rukovoditell - starshiy nauchnyy
sotrudnik G.A. Daniyelyan) Yerevanskogo instituta rentgenologii i
onkologii (dir. - prof. V.A. Fanardzhyan) A11,111 SSSR.

- .DANI.YELYAN,,_G.A.; MIRAKIAN,, M.M.
EyperJmental oubeLitution of the s;,Omach following its reBection
and gastrectomy by a sellment from the large intestine. Eksper.
khir. i anest. 9 no.5:27-30 S-0 164.
(MIRA 18:11)
1. Khirurgichaskoye otdolenlye (zav. G.A.Daniyelyan) Instituta
rentgenc-radiologii I onkologii (direktor - chlen-korrespondent
AMN SSSR prof. V.A.Fanardzhyan) AMN SSSR, Yerevan.

IlLNIYELUN, G-K-&,.KIMRUSSXIT, V.I.
Rultillnear conveyor in the cutting-out department of a shoo
factory. Leg.prom. 16 no.9:43-46 S 156. (KLRA 9:11)
1. Glavnyy inzhener Bakinskoy obuynoy fabriki No. 1 imeni A.I.
Mikoyana, (for-Daniyelyan)
(Baku--Shoe industry) (Conveying machinery)

p
ABRAMOV, M.A.; ALIVIMDIZAM, K.S. -, AMIROV, Te.M.,' AR R.I.; ARSHNITRY,
S.I.; BAGDASAROY, R.N.; BAGDASAROT, G.A.: BADAHTANM, A.A.; PANIT11-
DZHAFAROY, A.A.; KAZ , A.B.; KERCHENSKIT, M.N.; 1rOffW---
KHOV, S.I.; KRA OBATIM, A.V.; KURKOVS11IY, A.I.; LALAZAROV, G.S.;
LARI OV, Te.P.; LISMOARTIN, M.Te.; LIVSHITS. B.L.; LISIKTAN,
K.A.; LOGINOVSKIT, V.I.; LTSMOVSKIT, P.S.; MCLCHANOV. G.V.; MAT-
DELIMAN, N.M.; CKHONIKO, S.K.; ROKANIKHIN. V.A.; ROSIN. I.I.; RU-
STAMOV, E.M.; SARKISOV, R.T.; SKRYPNIK, P.I.; SOBOLEV. N.A.; TARA-
TUTA, R.N.; TVOROGOVA, L.M.; TER-GRIGORYAN, A.I.; USACHXV. V.I.;
FAIN, B.P.; CHICHEROV, L.G.; SHAPIRO, Z.L.; SMCHUK, Tu.I.; TSUDIK,
A.A,; AHUGOV, P,M,, red.; MARTTHOVA, M.P., vedushchiy red.; DANIY11-
LTAN, A.A0; TRCEIKOV, A.V., tekhn.red.
[Oil field equipment; in six volume] Neftianoe oboradovanie; v
shesti tomakh. Koekva, Gos.nauchno-tekhn.izd-vo neft. i gorno-
toplivnoi lit-ry. Vol-3. [Petroleum production equipment] Obo-
rudovanie i instrument dlia dobychi nefti. 1960. 183 p.
(MIRA 13:4)
(Oil fields--Bquipment and supplies)

DANIYILYAN, G.Te.. inshener.
Dieconnecting charging and load currents with cut-aut switches. Zlek.Rta.
24 no.7:53-54 Jl 153. (KGRA 6:7)
(Electric switchgear)

NIKOLAUVA, N.V., inzhener; PAKYATNYKH, A.B., inzhener: MUSATOV. T.P.,
inzhener; KAKHHUROV, L.D., inzhener; DANYELIAN, G.N., inzhener:
' C
IOFFS, E.Y., Inzhener; D.P.,
inzhener; MOSIKIN, V.S., inzhener.
On the organization of service for district substations. Zlek.
sta.25 no.2:36-42 F '5L@. (MLRA 7:2)
1. Azenergo (for Nikolayeva, Pamyatnykh and Makhmurov).
2. Donbassenergo (for 14usatov and Danyelian). 3. Mosenergo (for
Klement 'Yev). 4. Gorenargo (for Ioffe, Gruzdev and Moo 'kin).
(Electric substations)

DAMYRU @,G.Y@e.,i=h.
.1 ..
Checking the conditions of contacts in air circuit breakers by
meano of a meaouring rod, Elek.sta. 29 no.11:80-81 N 158.
(MMA 11:12)
Ollectric contactore-Testing)

USSR / Forestry. Forest Management. K
Abs Jour: Ref Zhur-Biols, No 7, 1958, 29540.
Author : _p@ai eulyan, I. A
Inst :-Not gDv-e-?r.--.:t@
Title : Forestry in the Armenian SSR.
(Lesnoye khozyaystvo Armyanskoy SSR)
Orig Pub: Lesn. kh-vo, 1957, No 9, 14-18.
Abstract: No abstract.
Card 1/1

DANITELTAN, L.A., starahiy doroshnyy manter (g. Kirovakan)
Selflean act. Put' I put.khoz. no-10:39 0 '58- (MIRA 11:12)
(Railroads--Safety Measures)

DANIYELYAN, L.Ye.
...
Motion of a viscous liquid in an open channel with an arbitrar-I
porcus bottom. Is-v. AN Arm. SSR. Ser. fJz.-mat. nauk 18 no.l:
100-107 165. (MIRA 18:6)
1. Yerevanskiy gosudaretvennyy universitet.

BARADZHANYANp G.Aq DANIYELYAN L.Ye.
Flow of a viscous fluid in an open @oroils ch&mel, I if AN
Am. SSR. Ser. fiz.-mat. nauk 16 no.3:83-90 163.
(KIPA 16 t 8)
1. Yarpvanskiy gosudarstvennyy universitet.
(Fluid mechanics)

VT P-tva
UTTOQ.o UT st@qjvocapu
V.%TtC
"O*ZtPTUU v J"o !a- puzu-13
in 400jil "MiVi.2 ya pus v 4@0 s A
40. &@ros
Tul.202wx AMU 9 ov fopnia uvtrzpzw;l
follo@
0
------------- 2UZ.19. 89
X=Gum
"PIATPuT
)q"lq uoq-m iIIUW stlo in facul OJO.T;:v ;o
P" WSAT.PW TIO aqn. wftor"f, 4JV vs@fxv M.TJ
-4odtq T uT uvTjwjnwjo j#AL-.rz su tl,. cc z-.Q;-Zzw@ ;. L;zT4
;mm U"%T-t'4%T lpa=Al@ aaq
-offil A PO OnP"d suzToov2 jo ur,T Tg"@O@ Tv>'.%-z0 aQT, V@
n. v
pa=Tpl.
.; 40 p @Ojjal vuptow-
in 21 I.Q.;p 30 "a.oa@
4q3 Wj SDVf6gZ "Sql jo fzTtTqvlftm 4,41, V"v P2,ltj Z, :p OT
eepwo in sutsilstrumap puv 2'u;lrwg*p .3u;j.lgav 4U.L -g... d
tPOTv-T&Auo* wroloalad %Pnz,.-tn *@pra, 4wor4j wctj pa@axozzj
6.44npwd oq 30 p- uo*4zpxvqz*-.y U; P.Ansallra V.pwo jo va"2
4uojejj,4%p in 0 ;Gctwuv tm wl."d tjolz"T104 ata IZ)YURAOO
ow0voAaAv'D wn,jc@j4d jo gpoq"lm
DOMMAPT %1@4SA VG,_%Z83u,33 @.@.Ul;" lotsati-.3uf
OLP-P-02U9
Tworzaqo in *2vplpuv2 lapn-frTaw *N*m 19*.Uatas tva;w,=,L JO
W%TVJV@MD "JASUZPT%Jo *K*l '2*-In JQ 4;Tpjp=0 'UV@3
rw *R,x Igaluvtn tvol@tw in lqu;uz-@l W*v lffa@ua;zv
IVOTUUPS,l JO *39PIPUTZ 'VAcuv-@Cajng *t),j Tv.-.=L2tj3
in &3wplptm3 8@gznsvm -v.E-A $gj3us-.@S ,v@;uwa.L in *ivplpuvo
zc- -h-V
r"PlsqD in 40200a ..S@U:kno -G-A 104,u.;@G tt-l"43 jo
IA4.ArTY *G*A , pimos jlrz-lo4jpz Wwaz,ly -a-.L :aoncu ?u;ttax-qrq jo -pa
Couuxzjou 0^22javolulm :X@U-iv 2u;.Zosuodr vu-a;zTppj
-pa-AulAd sojftz-
ON -vwAj*uu% dTlu vz%.z4-a Imal.zj4@uWT
ow" (a oox *"Jop, JO UOT.
.0 T QD) 3 -d4A 'ACpr.Z2 )f;tLIOU
-s&44%i.4Lnj -.% -A jusal
-*Zjou -Anjj2 out wq
9ZWAOC MOLLYZIMM XOOq r Z-flid OOTI

Translation- from: Referat:lvr,,vy zhurne4... Khlmiya, 19'59, Nr 8., p497 1'03R)
AL'rHOPS- Kasumyan,.V.Ya.,.DAniya1yan, M.K,, Ant=@,va., K. 1_ Sultarova, Kh-!,?,-,
Arus4'amov
A,S.
=2 _E.. The Preparation of Baku Petroleum far Pro.::o_,ssLng
PMODICAL: Sb. tr. ikz,-rb n -1 191,;S, Nr 2,
pp 16 - 33 (Azerb. summary)
ABSTRACT: A comprehansive thervome,:tanioal ;rc:ass has dt%4elop@d for pre-
paring Baku petrolfum for 'pro."issimg. Dimulsifl.1,ation is carrj@d r.A.At
at a temperature of 110 - 1400C ard a pressure of uv to 6 atm., ard thA
de3omDosition of emulsion is carried out in a mixer,, where the pre-
limAn&T-fy heated patroleim is subje,::ted to Intans1ve mixing., The,
separation of the principal mass of jir-ill watsr is @ax-ri4@d out in the
first group of dehydrators. The stoorA mixer Is fod with vetrolzilm,
oontaining 2 - 3% of water, and w%shing wa:tsT,. as a zeEult ol ir4gor-yur
Card 1/2 mixing the.salts pass -into th,,% washing water. ThA seltlfllrg of the

The Preparation of Baku Petroleum for Pror:esslng SOV/81 - 5 9 -8 - 2 8905
washing water is carried out in the se3ond sec:tions of the dehydrators, after which v
the petroleum: is cooled and passes into the storage tank for the prepared petrolsum. -
The metliod developed:fnakes it possible to reduce the consumption of demulsifier by
55 - 60%.
N. Kel2tsev
Card-2/2

s/(,65/63/000/001/001/005
E075/E436
kTjTjI0,?,i rtidytilcov, N.M. , .[)p
Ilydrocarbons of the naphthaiene neries in naillitha .1nd
gas oils from cataLyti-c cracking
1%ijililiya i telthl-jologip, topliv i m;tsel, no. 1 , 1963,
16- 1 ()
V, -.A \11o,I naphthalenes were isolated 1'rori naphtlia and light
and ht@avy 17,;)s. oils from catalytic cracking to satisfy the
inci-vc-ising industri.al deniand for phAhalic anhydride. The
tiaphtha"Ient! hydrocarbons were isolated from aromatic portions of
the oils separated on silica ge2 ind distilled to produce 100C cuts.
'1kyInaphtiuxlenes in the cuts were s,.!pfxratcd via picrate formation.
III(! llaphtha fraction.9 contained naphLhal.ene (0-59'1', of the original
niphthu), @-utcthylnaphthalena (3.66'.,), 1,6-dimethy)IIaphthalene ,
5'@) - The light gas oil fructiou4 coTitained dimethy).naphthal-
i2-(;5@-)) and triiiiethy)iitliljtli~ti(!ii,!,~- (2.113@@). The heavy gas oil
Iractlinis contained (3.3',.,), trimuthyl-
and tet-c-,ititeA.Iiv)ii.Al?h'fhalene,,'3 0.12@;).
T:, are 5 tables.
@i-@,CCI TION: INKhII AN Azerb '-Ak (INK10' AS Azerb SSIZ)
C',trd .0.1

I N;') Y U K ",V I N. M. I- DA N i YEL Y A N , M. K .
Study of' rinplittinInnei from potrolnum raw mpitlirtal.. Xhi,-,I. prorn. 41
no.2!22-.24 F 165. 18-.4)

Y
DANWLYAN, N. A. Cand Ped Sci -- (dies) "Methods Of I" Studying
Russian Diafects in the Non-Russian (Azerbaydzhanija and Armenian)
Schools of Azerbaydzhan." Mos, 1957. 8 pp 22 cm. (Academy of @
01 pu9j,44-4-
Pedagogical Sciences RSFSH, Scientific Research In3t for-UU
@
Tra-ining--Ma.tho(i4, 100 copies (KL, 26-57, 114)
- 137 -

1. DANIY7ELYAN, N. T".
2. us@:z (6co)
4. Ammenia - Cak
7. :3pot seedinr oak in NortLern Aruallia. Le'3. kI.Oz. 6, ',:o. J, l';53.
9. Monthly List of Russian Accessions, Library of Congress, AmT ril 1953. Unclassified.

PERSHIN, G.N.1 BEMKOV, G.P.; DANIYELYAN, N.M.) KATWITTIA, 11.1.
Ar.tibacterial and antivIral effect of norm '.--ictonos snd lactame
Zhur. mikrobiol.9 apid. i im=. 41 liu.3-Ir)--l-14 mr 164. (1 MI RA 1'7111 )
1. Vsesoyu2nyy nauelmo-isaledovateltskly khimlko--farmatsevtichel3kly
institut ineni ord2honikidze i Mantrallnyy nauohno-iseledwmtel'Sk@y
dezinfektBio.nnyy institut.

DAINTIYELYAF, E. G. Dr. Vet.Med.
"PeUagra in Swine.." Veterinariya, No.1, 19-50

DAU@MTAH. S-G-vkftndeVet*naUk
*,:,-,.--
Treating osteomalacia in cove with tricalcim. phosphat6e.
Votorinarlia 35 no.12:51-53 D '58. (KIRA. 11:12)
1. Yerevanskiy zooveterinarnyy institut.
(Osteomalacia) (Calcium phorphates) (Cattle--Diseases)

KIRICWMO N. I., kand. goologo-mineralogicheakikh naukg
lu--T, inzh.t MALYIJTKI?I, B. V., inzh.@.
I I..
Deformation of characteristics of Chirkey limestones.
Gidre stroi, 33 no.12tl8.-22 D 162. (MM 16:1)
(Chirkey Hydroelectric Power Statiom.-Limeatone-Testing)

DAN-1-TWTAM@-Armis Avakovich; YURMSKIY, S.V., prof. j' doktor takhn.
nauk, red.; ALTM, T.B., red.izd-va
[Studying the loading in repairing directional wells during
hoisting operations] Iseledovanie nagrusok pri remonte naklon-
nykh skvazhin; v protsesse spusko-pod"emnykh operateii. Baku,
Azerbaidahanskoe gos.izd-vo neft. i nauchno-tokhn.lit-ry, 1959.
77 P. (MIRA 13:3)
(Hoiating machinery)
(Oil wells-Squipmant and supplies)

ZYMITEV, G.B.; KILIKOT, M.N.; ASELAXOT. N.A.; IIAII=AIQS, A-At,
Azerbaijan machine mnufacturers are facing now problems. Axerb.
nefte khoz- 39;28-31 Ap 160. (HERA 13:11)
(AzerbaiJan-Oll fields--Equipment and supplies)

DAEYS,J., med.m. dr.; SIICUCAITE,O., doc.1
MUDGELIR'@E., D.; MILASAUSKIM:E,
KATILIEVE, G.1 rABASBSKMI"E,G.
_St.; CSTRAUSKME, S.;
MT__Ii@0J5SMCrUTE,A.;
The perspectives in further rheumatism control. Sveik. apsaug.
8 no.1202-35 D163.
1. Kauno Valst. inedicinos institutas. (rektorius - prof.
Z..Tanuskievicius) ir Resgublikine Kauno klinine ligonine
(vyr.gyd. - doe. P.Jasinskas).

V. DANK
"The brown coal basin of @Ieread-Szentl,al." P. 13 (4-OLDTANI K0ZU)'iY. j'JILIZTIN OF
7HF. HUNGARIM SIMY31CAL ST,,IE'rfp Vol. 83., no. 113, @an.tl,',ar. D53, i@udapest,
Hungary)
SO: II-Ionthly List of East European Accessions, L.C., Vol. 2 No. 71 J1IIY 1953P Uncl,

DANK, V.
Geologic results and economic outlook of deep-structure investigations of, the ar.ti-
cline of Budafapuszta. P. 541.
BANYA,9ZATI, IAPOK. (Magyar Banyastati as Kohaszati kgyesulet) Budapest, Hungary,
Vol, 14, no* 81 Aug* 1959@
Monthly List of East European Accessions (EEAI) LC, Vol. 8, No. 11, November 1959,
Uncl.

qM=, -Sandor; KERTA31- Gyorgy, dr.kjL&gL,,ktorjr BENCZF., Laazlo;
XASSAT, Iajos; JiUCSKO., Eva; GALUIBCS, Istvanj VAGY BIRO, Sandor;
TOTH, Janosj IMDEkz Ede; TA.KACS, Pal, dr.1 SIPOS, Janos; BEF(ftZKY,
Tamas; HAIMY,,. Jeno; KERESUES, Matyas., dr.j COPWIDES, Istvinj
RATIA, Saroltal' -
The 2d Hungarian Conference on Watural Gas. Ipari energia 3
no.10:225-231 0 .162.
le Nehezipari mihiazter (for Czottner).

'AAK, Viktor, dr.-
Outline of the deep geological atructure of the South Zala
Basin. Foldt kozl 42 no.2:150-159 Ap-Je 162.

DANK, Viktor, dr., okleveles goologus
Geological structure of the new natural gas deposits in Hungary.
Bany lap 95 no.11056-708 N 162.
1. Orssagos Koolaj- so Gazipari Troazt, Budapest.

DZ'K. Vikto Dr. (Hungary); KDWCI, Ruza (translator]
- @--r. I
The subsurface and geologic relations of the southern part
of the Great Hungarian Plain. Fafta jug 14 no.5/?2153-160
My-Jl'63-

DAM, Viktor, dr.
Natural gas explosions at Ullespuszta. Musz elat 18 no-15:
11 18 il 163.