SCIENTIFIC ABSTRACT FILIPPOV, V.F. - FILIPPOV, V.N.
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP86-00513R000413120009-1
Release Decision:
RIF
Original Classification:
S
Document Page Count:
100
Document Creation Date:
November 2, 2016
Document Release Date:
June 13, 2000
Sequence Number:
9
Case Number:
Publication Date:
December 31, 1967
Content Type:
SCIENTIFIC ABSTRACT
File:
Attachment | Size |
---|---|
![]() | 3.76 MB |
Body:
L 20332-;163
ACCESSION NRi'AT3001996
residue: Naphthene-parafflne Hf.'Ps; least residuet polycycHe aromatic Hid'*; the
monocyclic aromatic HC's were intermediate. All residue deposits were linearly
proportional to tirno. The outstanding effectiveness of the n-mpam-octylphenolate
of Ba (Ba-A) Is set forth with reference to residue, varnish formation, and com-
patibility. Piston-ting wear with Ba-A is relatively high, probably because of the
~abrasive properties of the suspension of BaC03 formed on the cylinder surface
lphosphite (TBP), th
,during combustion. Optimal aRtlwe'ar'additive: The tributy. e
ieffectiveness of which is Interpreted in terms of the formition of polar compounds~
It is postulated that the oxidation of the HC's In oils In an engine passes through a
istage of formation of hydroperoxides. Theoretical reasonings and test data are
ladduced. Upon decomposition of the hydroperoxides oxy-co'mpounds pertaining to
'ithe classes of alcohols or phenols form, also carbonyl compounds containing aide-
1hydes and ketone grotips. The possible unfavorable effects of each of these groups;
band the mode whereby additives can counteract them are discussed. The machan-
lism whereby the Ba-A can decrease the accumulation in the oil of complex eaters
is shown. In the subject tests no evidence whatever was found of an induction
period. in the accumulation of oxidation products in the crankcase oil, Thus, there
is no confirmation of prevailing opinion that the action of additives reduces itself I
to a lengthening of the Induction. period. In all instances a slowdown of the primari-I
and Aecondary oxidation processes was found. This investigation culminated In the
lCard ?/3
-L 20332-63'
ACCESSION NR: AT3001996
compounding of the. so-called muldcomponent Ats, including Ba alkylphanolate
with Zn dithlophosphate, Ba alkylphenolate with TeIATIM~-~3~3-Av,, a TsIATIM-339
mpo It
A with DF-1, et al. Test results of these andIoiii-e-r-co- '- unded le.on the IT9-3
engine with MK-ZZ Ba)m-derived oA1 and DS-1 Eastern S -conta.Wng-c rude derived
oil according to thet_lDM-.L-5"(VNIl NP)-M----~-t-1;;a are tabulated extensively. The
combination of T9LkTI4--ii9 and DFA was found to be most effective. Orig. art.
has 4 figures and 1 table.
ASSOCIATION: VNIII NP
SUBMITTED: 00 DATE ACQ: 23Jan63 ENCL: 00
SUB CODE: FL., CH, EL NO REF SOV: 005 OTHER: 000
Card
-3/3-
FOD�HIVALMMO, r.De; B"INAIN, M.1s; 31ASUIUMIT, S.V,; IVANOV, N.A.;
KACHAW', X.Ne; NINKOV, G,.Pe; ON ITZV# I.A.; PMEMIN, V.I.;
RUKrANTEMV, A.F.; RUSAKOV, A.N.; SOMOV, I.Ya.; 6TOMAKHIM, I.B.;
1-21L ~~ Prinimal vichastiya VINQGMOV, K.K. PODGORNOVAD- V.,!
radel TFDTANOVSKATA, N., takhn.red.
[Construction economics; textbook] Bkonomika strcitellstva; uchabios
posobie. Koskva, Gos.izd-vo polit.lit-ry, 1960. 534 p.
WRA 14a)
1. KommLmiaticheskaya partiya Sovetskogo Soyaza. Vysshaya partiy--
nays shkola. 2. Chlen kollegii TSentrallnogo statiaticheakogo
upravleniya SM (f or Vinogradov).
(Construction industry)
RUMYANTSEV, A.F.; YEFIMOV, A.N.; TRPLOV, G.V.; LOOHIN, Ye.; KARPENKO,_
A.P.; GRIOORIYEV, A.;. LILI.M,_Y_F_; PERESLEGIN, V.I.;
VOLODARSKIYp L.M.; RI11COJA,, L., red.; JUHANI, I., red.;
EINBERG, K.,, tekho. red.
[Econcmq of socialist industrial enterprises; textbook]So-
tsialistlike toostusettevotete ekonoomika; opik. Tallinn, 1961.
435 P. (MIRA 16:1)
(Estonia-Industrial management)
p
PODSHIVAT KO, P.D.; BALIKHIN, M.I.; BAsaplSK3Y, S.V.[deceased]; IVANOV,
N.A.;.KAGHAI/0V, N.N.; IMGM; G.P.; ONUFRIYEV, I.S.; PERESLEGIN)
V.I.; RUWANTSEV; A.F.; RUSAKOVI, A.N.; SEMUOV, I.Ya.;STOMMIN#
I.B.; PODGOMOVAL; V.,, red.; TROYANOVSKAYAj N..,
tekhn. red.
(Economias of construetion]Mconomika stroitelistva; uchabnik.
Moskva,, Gospolitizdatp 1962. 542 p. (MIRA 15:11)
1. Kommunisticbeskaya partiya Sovetskogo Soyuza. Vyssbaya par-
tiynaya shkola.
.(Construction industry)
RUWARTSEV, A.F.; 'YEFIMOV, A.W.; TEPLOV1. G.V.; LOKSON, E.Yu.;
KARPENKOI A.P.; GRIGORIYEV, A.Ye.; EFII;LIP
4~~PIDV ~F,
PEMIEGIII) V.I.; TYAGAY, Ye.p red,
TROYANOVSKAYA, 11.,,
tekbn. red.
[Economicti of industrial enterprisos; textbook]Ekonomika pro-
nqshlenrWl:h predpriiatiii uchebnik, 2.) perer, i dop, Izd.
Moakvap Gospolitizdat,, 1962. 574 1). (KIU 15:9)
1. Komunisticheekaye, partiya Sovetskogo Soyuza. Vyssbaya
partiynaya shkola.
(Industrial management)
RUMTANTSEVY A.F.; YEFIMV, A.N.; TEPLOV, G.V.; IDKSHIN, E.Yu.;
KARPENKO, A.P.; GRIGORIYEV, A.Te.; ULI:PPOV,, V.1F.;
PERESUGINO V.I.; TYAGAY, To., red.; TROYANOVSKATA, H.p
tekhn. red.
[Economics of industrial enterprises] Ekonomika promyshlen-
nykh predpriiat:Li; uebebnik. 3. isd., perer. MOSICVR, Gos-
politizdat, 1963. 574 P. (MIRA 16:10)
1. Kom=nisticheakaya partiya Sovetskogo Soyuza. Vysshaya
partiynaya shkola.
(Industrial management)
PODSHIVALENKO, P.D.; BALIKHINp M.3'.j BASHINSTI'l, S.V.[deceaBedj;
IVAN011, N.A.; KACHALOV., U.N.; NEMKOY, G.P.; OllUFRIYEV,
I.A.; PEREISLEGIllp V.I.; RUMYASTSEV, A.F.; RUSAKOV, A.N.;
SEIAENOV, I.Ya.; ST%IAKHIN, I.B.; FILIPPOV V F -
[Economics of construction; a textbook] Ekonomika stroitell-
stva; uchelmik. Moskva., Politizdat, 1961+- 542 PO
(MIRA 18:8)
1. Komnunisticheskaya Partiya SovetskogD Soyuza. Vysshaya
Partiynaya shkola.
WL
fe f 7T T- -V4i~
PbTl ULUCIISM1241YA UCIMTA NA PROI,,YSIILZN" ;YYF PR~,DPRMMYAKH. ]'(JSKIAY
IZD-VO MONE, 1952. 30 P. TABLES (V32;SOYIMNOY~4' OBSHCHESTV0 PO RASPROST.U-
NENIYU POLITICP'-:SKIK]i I II.AUCMiYKH ZVANIY)
tV* - 0 Pz- ~~tg V- 11~~3 Millf-7,
a!Ck M
4LV.- I i-4 Vorti~ fL n.-d
pptmje~,~t pit(alot, (jiatoe,, jiz- at. 1- 1. Ile
W xni-
runTm, Y.Y.
-M=w""rAwQk6,~
Methods. for evaluating the operating pr.operties of motor oils. Xhim.
I 'tekh.tcq)l. no.'91.67-72 8 156. (MLRA 9:10)
lJoesoyusayy nwachno-teeledevatellskiy inatitut Neftyanoy promyshlan-
nostis
(Lubrication and lubricants)
TSIGLUIO, T.A.; D.MMINIM, A.V. j_ FILIPPOV, V.F.
~ -- - :.
Performance of motor oils and hydrocarbon groups derived from
them. Xhim.i tokhotopl.1 masel 4 no.2:18-24 7 '59.
(MM 12:2)
(Talbrication and lubricants) (Hydrocarbons)
h1839
o
i7 S/262/62/000/004/017/024
o 1014/1252
AUTHORS: Druzhinina, A. V. Korotkov, P. 1. and Filippov, V. F. -
TITLE: High anticorrosive properties of engine oils from sulfureous crude oils.
PERIODICAL: Referativnyy zhurnal, otdcl'nyy vypusk. 42. Silovyye ustanovki, no. 4,1962,62, abstract
42.4.375- In collection Khimiya sera-i azotorgan. soyedineniy, soderLhashchikhsya v
neftyakh i nefteproduktakh, v. 3, Ufa, 1960, 487490)
TEXT: An experimental investigation of the LIHATHM-339 (TsIATIM-339 k) (barium alkyl phenolate)
admixture in the 14T-93 (IT-93), AA3-204 (YaAZ-204) and KA-35(KD-35) engines is reported. It is
prepared from the same reagents (except for sulfur chloride) as the TsLkTIM-339 admixture. For oils of
sulfureous origin, the U-339 k (Ts-339 k) admixture without the anticorrosive sulfur constituent-containing
can be used like Ts-339. Industrial application of the former permits considerable simplification of the
production technology of admixtures for oils of sulfareous origin and indicates a new trend regarding this
composition. The ACn-lI (DSP-11) and ACIFI-8 (DSP-8) oils containing this admixture comply with
rOCT (GOST) standard specifications with respect to all parameters. There are 5 tables and 4 references.
[Abstracter's note: Complete translation.)
Card 1/1
S )612
3~13~- /62/000/005/079/112
B162/B101
AUTHORS: Druzhinina, A. V., Tsiguro, T. A., Filippov, V. P.
TITLE: Effect of the main types of additives on the operating
characteristics and process of oxidation of oils in an
internal combustion engine
PERIODICAL: Referativnyy zhurnal. Khimiya, no- 5, 1962, 527,
abstract 5LI211 (Bb. "Prisadki k maslam i toplivam".
M., Gostoptekhizdat, 1961, 247-253)
TEXT; An investigation is made of the effect of additives---p-tert-alkyl
phenolate of Ba (I), phenyl-LC-naphthylamine (II), and tributy~ phosphite
in AC-10-7 (A5-10-7) oils (from sulfurous petroletum) and industrial-59 oil,
and also in fractions of naphthene paraffin hydrocarbons, fractions of
monocyclic aromatic hydrocarbons and fractions of polycyclic aromatic
hydrocarbons separated from these oils, on the accumulation of oxidation
products in the oils during testson the WT9-2 (IQ9-2) and PAi-51 (GAZ-51)
engines. It is found that the quantity of deposits in grooves, rings,
Card 1/3
'V08
62/000/005/079/112
Effect of the main typos ... w62Y13101
and the piston of the engine increases linearly with the operating time,
and that I is most effective in reducing the quantity of these deposits.
It is shown that, during the period in which the oil is working in the
engine, peroxide compounds, free and esterified hydroxy acids, carbonyl
compounds and carboxylio acids accumulate in it, and the accumulation of
these oxidation pro&ucts takes place to a much greater extent (2 - 4 times
more) in the fractions of naphtheneparaffin hydrocarbons than in the oils
or aromatic fractions; the accumulation of oxidation products in the oil
starts without an induction period at the moment when the engine starts
operating. The additives reduce the formation of peroxide compounds in the
working oil by a factor of 2 - 3 kthe most effective is II, the least is I),
hydroxy acids by 2o - 6o ~o(most erfactive is ii), carbonyl compounds by a
factor of 2 - 3 (the most effective is II) and carboxylic acids by a factor
of 2 - 3 (the most effective are I and II). On the basis of the results
obtained,.compound additives were prepared, consisting of 2 additives of
different types, and from the results of testing the additives in oils
N11(-22 (MK-22) and.~C-11 (D.9-11) the most effective proved to be
Card 2/3
M
4~-
3/081,/62/000/005/079/112
Effect of the main types ... B162/B101
combinations of Tsiatim-339 + f-L; -1 (DF-1), Tsiatim-339 + Ad E (AFB)
(Baalkyl phenolate) and Fit.,ICs (PMSya) + Vnii np-371. LAbstracter's notes
Complete translation]
Card 3/3
BIAGOVIDOV, I.P.; BOROVAIA, M.S.; DRUZHINIIFA,, A.V.; DERYABIN, A.A.,-
ZASLAVSKIYI Yu.S.; MONASTYRSKIY, V-.*; FUCHKOV., N.G.;
FI V F
RMPOVI.-W...,
Selecting additives to oils for varioutj uses. Xhim. i tekh.
topl. i masel. 8 no.3*-54--62 Mr 1t3, (MIRA 16:4)
1. VaesoyuzW nauchno-issledovatellskly institut po perera-
botke nefti i gazov i polucheniyu iBkusetvennogo zhidkogo
topliva.
(Lubrication and lubricants--Additives)
N
FILIPPOVP V.F.
Initial tests of motor oils on in IT-9-314 unit. Khim. i tekh.
topl. i nasel 9 no-401v-57 Ap 164. (MIRA 17:8)
L 20632-66 EWT(m)/r DJ
AC6_~ 011220 SOURCE CODE: uR/o4l3/66/ooo/oo6/oo57/OO5T
INVENTOR: Blagovidov, 1. F.; Druzhinina, A. V.;, IMonastjrsk1y,_Y._j ; P~iE~k~ovN. ~G.*.
F.-,_Avaliani, T.
Deryabin. A. A.% Borovaya, M. S.; Filipp K.; 7.aslavskiy, Yu. S
-Tarma I M.;!
n;Va,,'F.S-; W==,; DmiTrlyeva, M. VrDe G. P.; Kuliyev, At
Suleymanova, F. G.; Zaynalbva, G. A.; Sadykhov, K. 1.
ORG: none
I
TITLE; Preparative method for motor oils! Claiss 23, No. 179868
SOURCE: Izobreteniya, promyshlennyye obraztsy, tovarnyye znaki, no. 6, 1966, 57
TOPIC TAGS: lubricating oil, lubricant additive
ABSTRACT: An Author Certificate has been issued for a preparative method-for motor
oils,involving the introduction of additivesil To impart the required service proper-
ties, the additives ueed are an alk_ylp_Renol-form~ldehyde conlensation product
(3~15%). a sulfonate additive (1-6%), an additive based on xanthates or dithio-
phosphates (0.5-1%), and an organosilicon additive (0-0,03-0-005%) (the additives
are no further identified in thesource). (BM]
SUB CODE: 1l/ SUBM PATE: opAug62/ ATD Prms:y%2S
.5002.237
-L-09t~'- -67-
ACC NR: AP6035872 SOURCE CODE: uR/o4l3/66/000/020/0092/0092
11;;VEXTOR: Butkov, N. A.; Filippov; V. F.; Barabanova, G. P.; Yerinov, V. S.; Zharoy,
:G. A.; Kochkin, Yu. A. ..........
None
~:TITLEE: A method for producing a'sulfonate additive. Class 23, No. 187199
iSOURCE: izobretenlya, proiTqghlennyye obraztsy, tovarnyye znak,i, no. 20, 1966, 92
IOPIC TAGS: fuel and lubricant additive, sulfone, sulfurization, petroleum product
1ABSTRACT: This Author's Certificate introduces a method for producing a sulfonate
~additive by -sulfurization oL_p ~role~um\%products -with subsequent neutralization of the
Iresultant sulfo acids and treatment with metallic compounds. The adiitive is im-
iproved by taking oils which contain sulfones as the initial petroleum derivatives and
jusing magnesium chloride in the presence of sodium carbonate and caustic soda to treat
I
~the compounds obtained after neutralization.
';SUB CODE: 11, 07/ SUBM DATE: limay65 JATD PBZSS: 5105
C,rd
Lmc: 621.
.84;547.41
FILlFPOV, Vladimir Grigorlyevich; YERLYKIN, L.A., red.
(Displacement digitizers) TSifratory peremeshchenii.
Moskva, Voenizdat, 1965. 143 P. I - (MIRA 18:4)
PANASHCHENKO, I.P., dote.; CHUNTUIDV, V.T., dote.; POGREBINSKIY, A.P.,
prof.; SPATAR, N.G.# dots,; LWTA, S.P., dote.; USTINOVA, L.A.,
data.; XRIVENI-1 P.V., prof.j j-'ILIPPOV V.I., dots.; GOLUBEV,V.A.
kand. ekon. nauk,- DZYUBKO, I.s., do~is.,-*'iOOR'YEV,A.N., dots.j
ZATSEPILIN, V.G.., dota.,- TERESHCMMKO, V.F.; IMBERG, M.Ya.,
kand. ist. nark - ORLIK, Ye.L., red.; KHOKHANOVSKAYA, T.I.,
tekhn. red.
[Economic.history of foreign countries]Ekonomicheskaia istoriia
zarubezhxqrkh stran; kurs lektsii. Kiev, Izd-vo Kievskogo univ.
Pt.2.[Froia the 18701o to thw present time]Ot 70-kh godov XIX v.
do nastoitishchego vremard. 1961. 387 p. (HIRA 15:11)
1. Prepodavateli kafe(jr polij,joheskoy ekonomii i istorii narodno-
-,:go khozyaystva Kiyevalcogo ini'ltituta narodnogo khozyaystva (for
~t4-_exceV%- Orlik, Khokhanovskays). (Economic histO'7)
R"
MATELMOK, D.A.; F:,*6LIPPOll V.I-p otv, rod.i MUM, A.G,p tekhn,
red.
[Cooling of Us air or cix-culating water in centrifugal
fans] OlcMazhdenia vozdukloa ili oborotnoi vody v tsentro-
bezbnyk]2 venti-liatorakh. Leningrad, Profizdatj 1963. 95 p.
(MIRA 17:2)
TSFAS, B.S., dotsOnt, kand.tekhn.nauk; SHATALOV, N.S., studenti
PILIPPOV,J~T..'.,,,atudent
-.1";-- 1 :. ~' I
Determining; the angle of equistable oblique butt weld.
Sbor.dokl.Stud.nauch.ob-va Fak.mekh.sell.Kuib.sellkhoz.inst.
Oo. 1:126-130 162. (MIRA 17:5)
1. KuybyshevSkiy Beltskokhazyaystvennyy institut.
1ACC NR% AP6029058- SOURCE CODE: ~_R76Vf:f/66/666 /01 4_/0 0 85 /00'8~711
Korobov, V. I.; Panin, Ye. I.; Prusov, N. K.; Filippov, V. I.; Solov1yev,
None
TLE:
A device for checking the thickness of an enamel film. Class 42, No. 183956
41
':[announced by the Independent Technological Design 16ffice for Microconductors (Samo-
stoyatellnoye konstru]Ltorsko-tekhnol.ogicheakoye byuro po mikroprovodam))
SOURCE: Izobret prom obraz toy zn, no. 14, 1966, 85
TOPIC TAGS: surface film, protective coating, measuring instrument
ABSTRACT: This Author's Certificate introduces a device for checking the thickness
of an enamel film which may be used during enamel coating of wire. The unit contains
a capacitance pickup connected to a self-excited oscillator. A high-frequency ampli-
fier, detector, DC am:?lifier with cathode follower and an indicator are connected in
series to the oacillwtor output. The circuit of the device is simplified Emd mea-
surement accuracy is improved by using a high-frequency oscillator with a load in the
high-frequency amplifier in the form of high-Q stagger-tuned tanks with symmetric
resonance curves and -a narrow passband. An unblanced signal appears at the load out-
put which is proportional to the change in thickness of the enamel film shown by the
indicator.
ACC NRt
I-self-excited-o.soillator; 2-high-frequency amplifier; 3-indicator
SUB CODE: 13, ll/ SUBM DATE:. Ic?Apr65
Collected Papers (Cont.)
SOV/4172
Radebenkop A.N. Now Wav of Coding Digital Motor Readings Using the Metb3d
of Partially Unbalancing the Counter 251
The author investigates a method of readout by means of binary codes-with
consecutive pulse sequences from the counter of a follow-up digital meter.
Radchemko, A.N., and V.I. Filippov. Logical Feedbacks in Shift Registers 257
The authors explaE_fHe__ae_-sTjffi7-of shift-register counting circuits.. and
calculate feedback circuits with an interconversion factor of 10,9 for
20-state counter oircuitop mid for the readout of 127 seven-digit binary
codes. They streas the advwitages of logical feedback systems over the
usual binary stage circuits.
Deliving, G.N. Designing a Static Power Converter Using Elements With
Rectangular Hysteresis Loops 267
The author examines the possibility of designing a static power converter
based on the principle of time-amplitude modulation and making use of ele-
ments with rectangular hysteresis loops. He concludes that this could be
achieved after further theoretical and experimental investigations.
;OSboratk rabot po voprosam elektrotookhaniki, vyp. 3-- 'Ener6eticheakiye SlGtOW7,
.he
elek-tromaehinostroyenlye, clektrio skW tyaga, avtomatizirovawVy elelctroprivod
i avtomaticheskiye.1i telemokhaniche)3kiye sistemy, elektroevarochnoye oborudovaniya,
z
1 )Psaw Izd-vo AN S&cM 1260. 3UP.
na t. elektrornelchnnIkA
publ. from
(IPILIPPOV, V.Iot insh,
Hardening and temPaing conveyer equipment. Metalloved. I terme obr*
.mete no*10%46-54 0 "60.'. (MIRA 13:10)
1, Osoboys konstruktoriskoye byuro Xektropechl,
IMetals-Ileat treatment) (Conveying machinery)
S/129/61/000/001*/002/012
E073/E535
AUTHORa Filippov, V. I., Engineer
TITLE: Conveyor Unit with Forced Heating of Components to be
Quenched and Tempered
PERIODICAL: Metallovedeniye i termicheskaya obrabotka metallov,
19619 No.4, PP- 5-9
TEXT: OKB "Elektropecb.111 developed a series of continuous
furnaces, an electric furnace for heating aluminium castings prior
to pressing and also a quenching-tempering conveyor unit for heat
treatment of bolts. The unit consists of a quenching furnace, a
quenching tank, a washing machineg an electric temnerinr fiurristra-
And a tank for oxidation. The quenching furnace, type OX 6 -793
(OKB-793) (K-12 x 100) is intended for heating of components to
8500C in a protective gas prior to quenching. If the components
are charged in at 400 to 4!iOQC and.200C, the productivity of the
furnace is 3.4 and 2.4 tonz/hour, respectively. The components
are transported by means of a conveyor belt consisting of cast
links. For reducing the nocessary traction forces, a part of the
conveyor belt in moved along a roller train. The rollers of this
train and the drive shaft are driven by a d.c. motor, via a reductor
Card 1/5
S/129/61/000/004/002/03.2
Conveyor Unit with Forced Heatingg., E073/E535
gear, a distribution shaft with gear-boxes and chain transmissions.
The motor is fed from an a.c. circuit through selenium rectifiers
and magnetic amplifiers so that the speed can be regulated
continuously within a very wide range. The heating elements are
made of 9 mm diameter wire fitted into the bottom of the furnace
under the active branch of the conveyor, on the side and front
walls and on the roof of the furnace. All the heaters are fed
from step-down transformers, the voltage of which can be regulated. V/
The jacket of the furnace is hermetic and made of sheet steel in
sections. For reducing the consumption of protective gas, the
front part of the furnace with the conveyor is so designed that the
level of the active branch of the conveyor is 100 mm above the
level of the outflow of the protective gas. To ensure access into
the workine space during repairs, the front part is in the form of
a removable, lined cover. The furnace has seven thermal zones,
each of which is 1.5 m long; the first and the second zone have two
independently controlled groups each. The top group connects the
voof and the side heaters, the lower group connects the bottom
heaters. The temperature of all the furnace zones except the last
one is higher than the specified heating temperature. To pre-vent
Card 2/5
T
S/129/6i/000/004/002/012
Conveyor Unit with Forced Heating... E073/E535
over-heating of the heaters, in addition to controlled thermocouples,
monitoring thermocouples eire fitted into each of the furnace zones,
which give indications of the operations in the respective zone
and effect switching off if over-heating occurs. Special thermo-
couples are also fitted in the second, fourth and sixth zones which
monitor the temperature of' the conveyor belt and of the components.
In the case of water quenching, the quenching tank OKB-794 has a
productivity of 3.5 tons/hour. The cleaning machine, type MMK-16x4O.
is intended for cleaning components by means of a fluid after
quenching in oil. The tempering furnace, type OKB-795, is designed
for heating components to 5000C and has a productivity of 3.4 tons/
hour. The here described. furnaces have a number of advantages;
the specific 2roductivity of the hardening electric fu Enace is
200 kg/hour-m , of the tempering furnace 355 kg/hour-m as compared
to 100 and 90 kg/hour-m , respectively,for machines produced by
the Moskovskiy avtomobilnyy zavod (Moscow Automobile Works). The
productivity 2f furnaces developed by OKB IlElektropechlil is about
130 kg/hour-m (quenching) and 110 kg/hour-m2 (tempering) and the
specific productivity of furnacel produced by the British firm
Lindberg is about 150 kg/hour-m The here described unit has a
Card 3/5
S/129/61/000/004/002/012
Conveyor Unit with Forced Heating... E073/E535
total electricity consumption in 3-shift operation of 400 kWh/ton.
The author arrives at the following conclusionsa
1) In constructing electric furnaces, particularly for automatic
production lines, it in necessary,to provide high-speed or forced
heating. Existing.electric furnaces with ordinary methods of
heating should be transformed to higher heating rates. This is
particularly important in plants in which a large number of
electric furnaces are installed that operate with short holding
times at the final temperatures (ball bearing plants etc.).
2) It is necessary to put into operation the manufacture of'
saturation chokes for use in electric furnaces with high-speed
heating, to provide proportional temperature control instead of
2-position temperature control. These measures will permit
increasing the operational reliability of temperature control
systems, since it will be possible to dispense with mobile elements
in the system, to increase appreciably the operating time of the
heaters and to simplify the control system of the furnace.
There are 3 tables and 1 figure.
ASSOCIATION1 OKS (OKH) "ElektropechOll
Card
S/129/,61/000/004/002/0,LZ
_[Conve*yor Unit with Forced Hdating.--'.EO73/E535
Experimental Conveyor
I - hardening furnace, 2 -~quencfiing tank, 3 - cleaning machine,
- tempering furnace '5 - tank for oxidation and cooling of the
components, 6'- front .'cover', 7 - conveyor belt of the*4uenching
furnace, 8 - driving roller train, 9 -..gearboxes for transmitting
the rotation a roller train group, 10 - drive of the conveyor.
to
belt and of the roller*train, 11 - conveyor belt of the quenching
tank, 12 - body of the tank, 13 - conveyor drive, 14 - driving.
shaft of the quenching tank, 15 fan, 16 - conveyor belt of the
tempering electric furnace,.17 conveyor drive, 18 - driving shaft,
19 discharge shoot.
7 P
9 V
7 1
r
9P
4
Card 5/5
S/194/61/000/011/032/070
fro D256/D302
AUTHOR: Filippov,_V.I.
TITIZ: Data codirg by digital combination
PERIODICAL: Referativnyy-zhurnal. Avtomatika i radioelektronika,
no. 11, 1961, 53, abstract 11 V427 (Sb. rabot po
vopr. elektromekhan. In-t elektromekhan. AN SSSR,
1961, no. 5, 215-226)
TEXT: Ferrite cores used as counters are most suitable for
transmission in binary coding of data containing a large number of
monotonically variable parameters. The information read-out arrange-
ments often become bulky and complicated if the magnetic state of
the elements is required to be preserved, and in this case the con-
trol line becomes charged with secondary information concerning the
past events. Using a transfer registration with a feedback logic
for coding ro-moves some of the disadvantages but for a large coding
capacity the arrangement becomes complicated. A description is
Card 1/2
S/194/61/000/011/032/070
Data coding by digital combination D256/002 Z2
given of a method of data coding by digital combinations capable of
handling a large volume of information, and converting it to a shape
convenient for transmission, using a limited number of elements.
Z7&stracter's note: Complete translation-7
Card 2/2
Fnippov, V.I., inzh.
-----------
New series convoyer-type electric furnaces. Metalloved., i term.
obr. met. no.9:59-62 s 161, (MIRA 14:9)
1. Osoboye konstruktorskoye byuro "Elektropechl".
(Electric furnaces)
........ . .
FILIPPOV, V. I.
Roller OKB..885 electric furnice for the secondary anneaLling of trwformer
steel. Metalloved. i term.-obr. met. to.3.-49-51 Mr 163. (MIRA .160)
11 VaesopmW nauchno-iseledovatellokiy Inotitut ele"rotermicheakogo
oborudovamLya.-
(Electric furnaces) (Furnaceal Heat-treating)
fACC'ESSION
S/2573/63/000/009/0255/0264
NR: AT4015864
W I.
AUTHOR: FiMP
n!,
TITLE: Design of systems for the correction of a single error in binary codes
SOURCE: AN SSSR* Inatitut eloldromokhaniki. Sbornik rabot po, voprosam vloktromokhanikli~
no. 9, 1963. Avtomatlzatsiya, talemekhanizatsiya t priborostroyeniye (Automation, tole-
mechanization and instrument manufacture), 255-264
TOPIC TAGS: binary decoder, pilse generator, generator coding, coding, filter, encoders I
error, error correction, correction system, error correction system, compater inputo
decoding polynomial
!
ABSTRACT: - The design of a isingle errok correctl~n system is worked out using as an
example a -system with a capacity for eleven information symbols in the Input woYd. This
does not Impair the generality of the result, for systems with larger capacities simply
require more "on. The block diagram of the system in shown in 1%. 1 of the Enclosure.
The message oonnintiM of m synhols Is written as the polynomial
Card
ACCESSION NR: AT4016864
The enelding operation in represented by
r
(mod 2).,
b(x)=za(x)y
.
where ~K) to the encoding polynomial of degree k n-m andaq j,6 i are code symbols A
which are either zero or unity. The coding is performed by the direct coding filter, which
is a linear binary mquence filter doscribed in detail by D. A. Huffman (IRE PGrr, Vol.
IT-2, No. 3, Set. 1956) and produces the coded message of length n m. + k. The error
polynomial due to a single noise enor in the channel Is
so thatthe received message is
L
S ~
(4)
L
'2/9
Card-,
- ---------------
,:ACCESSION NR: AT4015864
where Gdenates mod 2 addition. The rosponse, It, of the invern coding Mier to xt~) Is.
2~-U-' (mod
Is (2)] c- QD
jth.symWj,,
where is the position of
if z(x) b(x) (w error), then R Ebtt)j (mod (X))=0.
,If, however, the error (3) exists, then the appearance in the filter of the combination
xi-11 corresponds to the distorted symbol position. This combination is sel(KAW by
R M i - -.71':"
the code selector and add6d (mod 2) to a6rrect the error in the cocfed message, wh ch mom
0 was a in the memory, whose capacity is n digits. The corrected mesoNgo is..
by a de6oding MW which porforms the operation
I;prd 3/9
ACCESMON NR: AT4015864
Pulse generators activate th6 filters and provide correct timing. In the example Zia
k 4, (x) X4 + x + 1 and the transfer ratio of the direct coding filter is
where D is a unit delay operator. 7he decoftg,pDlynomW is.
and the transfer ratio of the *verse coding f4lter Is
4/9,
Card
7.
- - - ------- --
2-S "M
-
. -..,
: 17, --,-
- --I- i -,
:;. ~ I- -
-.. , I.. ; - , 5 1 7
;;ACCESSION NRs Avmm ENCLMREt 02
A'
rA T'l 7,
TA A TA
to
2e
SchamatLo of Direct Codinj niter with mdernal mmaers.
Fig. 2 dagrava
Cad 7/9
"CMON XW'AT4015864
A, A,#
A; 08,j 0 A'O
8bl 00
JA1.1
Az fij
e1
_ qN, .4,
-iw
M.'3 schematic diagram of Morso Coding Filter realized with ferrite-triode
'elements.
Cad..
AT4015864 ENCUSMS 64
A
A
A, if, As 82 A
TA r, TA To TA
Ts
go
&two
8b
A A
Fig. .4 - sch atio DI of Decoding Filter with external m1mmers.
9/9
FILIFFOV, V.I.,.kand. tekhn. nauk, otv. red.; RAUKIWARGER, Z.O.,
--red-w f WBYLEVA , M. 1. p red.
[Protection from. electromagnetic fields and electric cur-
rents JLn industry] Zashchita ot deistviia elektromagnit-
nykh polei i elektricheskogo toka v promyshlennosti; sbor-
nik rabot laboratorii alektrobezopasnosti instituta. Le-
ningrad, 1963. 175 P. (MIRA 18i1)
1. Vsesoyuznyy nauchno--issIedovatel*:3kiy institut okhrarq
truda.
FILIPPOV,
fUthod for the calculation of systems for correcting a Single error, iA-
binary codes. Sbor. rab. po vop. elaktramckh. no.9:255-264 163.
(MIRA 17:2)
kimd. telhn. nauk, otv. red.; GRDUTLIN, M.I.,
kand. tokbn. nauk, spots, red.; BOBYLEVA, M.I., red.;
RAUKHVARGMI Z.O., red.
[Theory and calculation of ventilation air jets; collec-
tion of transactions] Teoriia i raschet ventiliatsionrqkh
strui; abornik trudov. Leningrad, Vses. nauchno-issl. in-t
okhrarq truda, 1965. 293. p. (MIRA 19:1)
1. Soveshchaniye, poevyashchannoye voproqi-m teorii i rascheta
ventilyatsionnykh struy. Leningrad, 1963. 2. Vsesoyuznyv
nauchno-issledovatell-ski-y institut okhrany truda v gorode
Leningrade (for Grimitlim.).
FILIPPOV, V.I., redak.-tor.
"~~iusk-, a coneise dirpotory for 1955.Compiled as of KfrcJL 1. 19551
Minsk; kratkaia ILdresno-spravochmia kniga, 1955 g. Po soatoianiiu na
1-;e marti 1955 g. Minsk, 1955- 200 P. (Jau 10:5)
1. Kinska_* gorodskaya roklamno-spravochnaIta kontora "14oagorepravka"t
Minsk, (Ninek-J)irectories)
vi _VI
~F-v A
4VIMt Golomonov. K.
TIngs Ocientiflo-Vathod. Conference on the Problem of
R -up Rocks b;r Xxplosions (Pervoye nauchno-
reeking :ovvisbahanlye po problems arobleniza
notodicbmakoye
gorn:7kh porod v r7"M)
PSUOVICAL: IsTestlya Akedealh lauk 830 Otdolenlya Tekh"che
Sank, 1958, Xr 5, ;;, 243~-144 (&37ai) -4n
AIWIXACT: On February 24-26, 1.958 a conference was held on bre
up rocks by explositma at the L-Atituts of timing, kc,ss.,
USSR (Institut Oornego Dole kI SM). 100 people from
32 towns participatid end the participants included
representatives of Vorka, Research Institutes of %'A*
So. frosi various parts of the Soviet Union,
4 partmontal research institutes WA of higher teaching
Chemical Physics, ic.13c. USSR Unstitut kbinicbeakoy
fialki, AX SSSR)
Outal setbods of studying the breaking-up of
:=X=.*" by L. 1. Iklokurov, Institute of Chemical
Physics Am at mut
"On co;h4l"'ths extergy of elantic waves in
cesessing a high, scozatio rigidity and ensuring yield
t
f fragments of a pro-deteraimed also* by
14ningrad Mining Inatiltute (tool, adekly gar, tLtQtjj
'On the technique, of studying the character rnreakimg.,up
of fire roa%* by memai of charges of increased les6th.-
by ~12 w Inatitau of Mining, Ac.Sc.
an
"On, inva"atigazing the tis"as of the potential and the
;rocess of break, -up of rocks by explosiona in tba
case of instantaneous and briefly delayed charges in this
terraces of opon-cast Wining% by 1., 1. Bellysoko,
DA4prOpQtVQV k Mining U4titote. i
In %be section relating to evaluation of the cram
Q*rIL 2/5 proportbe a1t explosives and %be breakIng-up of rockUmfbe
0
Ya.G.; ~~Ovv V.L
Now apparatus for the baoteriological investigation of air at hlA
alt#udes. Lab. delo 6 no,501-53 8-0 160, (KCRA 13:gy-
1. Llvovokiy institut epidemLologiig mikrobiologii i gigiyeny
(dir. S.D. Kiyuskot_nacbqlnic.A*G.Makarenko).
(AIR-Ul' TMOLOGY)
FILIPPOV,_ ~J. ir,zh.
New standard-designs for large water-prifying stations. Vod. i 3an.
tekh. no.5t(--9 164. WRA 170)
YAKIMOV, M.A.- NOSOVA., N.F.; FILIPPOV, V.K.
Chan e of the chemical potentials of water in the systems type
UO INO )h-.H20 at 250 C. Radiokhimiia 5 no.4t471.-
j t )2 - M(N03
47 63. (NM i6sio)
(Uranium compounds) (Water) (Activity coefficients)
YILKIMOVP bI.A., misnw., Ma.;_LfILP~~Y,_V.K.
Heterogeneous equi.Ubrla in the ternary system
'!I')
1102(NO3)2 - H1103 - .0. Part 3: Solution - vapor eauLlibrium of the
binary system U02003 -2 - H20 at 25 and 500C. Radio]&dmiia 6 no.5t
548-552 164. (MIRA 18!1)
YALKIMOVY M.A.- MUMIN, V,.Ta.,, NOSOVII, N.?.~ rMilptlIv, VOL
I
&LIM-96-n3ous eq!.dllb-.!-a in the tamary oynt,.am Up-leltv?,"
,Pktrt 4R Solutions-vapor equilibrium of tbe blvitr-I
nitric acid-watar at 25 m3d 500C. Ra-dJ-61khJudip- 6 1Q.
-0 "1
(MIRE -U~ f _i )
YEMPANOV, D.O.; SHARIPOV, V.Sh.;,]FILIPPOV V K.; BISEMBAYEV, K.;
KIMf G.S. U--Z~
Breaking off'ore with the use of self-propelled equipment
at the Dzhezkazgan Mine. Trudy Inst. gor. dela AN Kazakh.
SSR 13:73-77 164. (NIRA 17:7)
SHARIFOV, V.Sh.; FILIPPOV, V.K.; ARTAMONOVSKIY, 0. Yu.
Universal running gear.for self-propelled mining machinery.
Trudy Inst. gor. dela AN Kazakh. SSR 13:93-97 164o
- (14IRA 17:7)
Advantage of inereasing'borehole diameter in adning. TraAy lust. gor.
dela AN razakh. SSFL 1955a-61 156. (MIRL 11.-1)
(Boring)
z
FILIPPOV, Y.K.
I
- - I- -W;_* - i - ~
I.noreasing the charge density of large-diameter rising boreholes.
1xv.AN rasaM.SSR.Ser.gor.dela. met. L stroimat. no.11:81~-87 156.
(M14 10, 1)
(Blasting)
LIPPOV, V.K.
Rock shattering by blasting with long charges; as applicable to ores
of Dzhezkasgan deposits. TIrudy Inst, gor. dela, AN Xazakh. SSEL 2:110-
123 '57. (MIRA IWO
(Blasting) (Dzbezkazgau--Mining engineering)
A
7ILIPPOV, T.K.
0 U~-flat models to study the nature of rook fracture by
elongated charges placed parallel to exposed surfaces* Isve
AN Kazakh. SSR. Ser. gor dela no.2:60-71 158. (MIRA 32:10)
(Mining engineering) (Geological modeling)
ALEKS&MROV, L.A.; AKSINOVA, Z.I.; AR inw, s.r.; AFARLSIM, 4Z#.;
BOBBIE=, LA.; BEMMY, )LB.; BffANDV, V.A.; VALMNOV, D.P.;
VXRKHDVSKIT, I.A.; GOMMUN. I.M.; ]XVIDDVICH, L.K.; IMGTEWA,
G.N.; ZEMOV, P.P.; KAUJUMV, F.V.; KOLISNIK, P.A.; KMIM,
A.P.; KRAMARMO. G.V.; JWZS, I.L.; KURSENV. A.B.; OSTROVSKIY,
N.B.--, PASHINA, S.N.; SSMXIN, N.V.; MAMOV, A.T.; TIKHDHIROV,
1 Gmwasa
A.K.; ULITSKIT, P.S.; USIMOV, r,
L.M.; GWDIROV, A~A-; SMJPLYAKOV, S.I.; TIKHDWMV. U.N.
Petr Valerianovich lanio-rekli; obituary. Avt.transp. 37
no-4:57 AP '59. WBA 13:6)
(Kaniovskii, retr Valerianovich, 1681-1959Y
FILIPPOV, V. K., Cand Tech Sci -- (diss) "Investigation of the
mechanism of demolition of large mountain rocks by the explosion
of extended charges." Alma-Ata, 10,60. 15 pp with illustrations;
(Ministry of Higher Educaticn USSR, KazaKhistan Mining Metallur(fy
Inst); 150 copies; price not given; (KL, 18-60, 153)
ANMIMSKIY, Kiidwil Davy4lovich- FILIPPOT Vitaliy lonstantinovich:
MALYSHCT, A. 1-,', red.
[Operation of automobile trains]. Mceplustateiia avtopoezdov.
Koskva.:Nauchno-telchnAid-v~ Y-va, avtomobillnogo transp. i.
shossainykh dorog ABM, 1960. 38 p. (MIRA 14
(Aut6mobile trains)
a
g:
-9-kI-PPOV, V-K-
Indices of the effect of rock loosening blasts and the spacing
between borehole charge blastinga. Trudy Inst. gor. dela AN
Kazakh. SSR 5:82-513 1609 (MIRA 13:8)
,(Mining engineering)
---- FILIPPOV, V.K.
Studying the naturo of the breaking of brittle materials at various
loading speeds. hudy Inst.gor.dela AN Kazakh.SSR 8:107-~LI5 161.
(KTRA
- % 1514)
(Mining engine oring-Models) (Blasting)
I :-;.V ~,' E'v 'A'- : ,
FILIPPOV, V.K., fLornyy Inzhener
Direction of fractures formed in breaking hard rocks by blasting.
Vzryv. delo no.47/4:172-177 t61. (MIRA 15:2)
I. Institut gornogo dela AN KizSSR.
(Blas4ng)
r
Study of the natux,* of the distribution of stresses in detionatiniv
an elongated charge. Trudy Inst.gor.dela AN Kaz&kh.SSR 909-1-18
l62. (MIRA 1518)
(Bla5ting) (Strains and stresses)
FILrPPOY,,V.,K..
In the Engineerit4g Council of the Ministry of Automotive Transport
and Highways of the R.S.F.S.R. Avt.dor. 19 no.12:32 D 156.
(Ulu 10: 10)
(Roads)
. FILIPPOV, Vitaliy Konstaintinovich; TARANOV, A.T., red.; KNOROZ, X.M.. red.;
---MLIKOVA, -H.V0, tekhn-,red.
[Automotive transportation in the U.S.S.R.; a chronological survey]
Avtomobillnyi transport SSSRI khronologicheakii obsor, Pod obabehei
red. A.T.Taranoira. Moskva, Hauchno-tekhn.izd-vo avtotransp.lit-ry,
1957. 1(Y+ p - (IIIRA 11:2)
(Transportation, Automotive)
j1-1-j-"PO -'~I
FILIPPOV V K
Conference of the leading workers in automotive transport and
road building in the R.B.F.S.R. Avt.dor. 20 no.6:30 Je 157.
(HIM 10:10)
(Road construction--Congresses) (Transportation, Automotive)
FILIPPOV&-Y,U"-Xmatant,tp,qlieh; SOKOLOY, V.F., red.; DONSKATA, G.D.,
tekhn.red,
[Organi2ing radio.communicatiort in automotive transportation]
Orgmizatella,radlosviazi na artomobillnom tranaporte. Koakva,
Nauchno-takhn.itd-vo K-va avtoinobillnogo transp. i ahoseei0kh
dorog RSFSR, 1959- 37 P. (KM 12:9)
(Radio in automotive transportation)
FILIFFOV. Y.K., red.; KALIKOVA, N.V., tekhn.red.
-00--W~
[Efficiency promoters of auto transportation and highway
organizations] Ratsionalizatory avtotransportnykh i
dorozhnykh organizataii. Moskva, Avtotransizdat, 1959.
103 P. II (MIRA 12:9)
1. Russia (1917- R.S.F.S.R.) Ministeretvo avtomobilinogo
transports 1. ahoseeynykh dornge
(Efficiency, Industrial)
FILIFFOV, Vitally Kanstantinav�,-~h; ",-ELOVA,
~,
'p- *`,~~'~~, - ., -4~-
,
tDevelopment of public ajtrrrv',!v(~ transportaL,"Oril
Razv:ltie &vtomobillnogo transporta cbshchego
zovanila. Moelrva, Trayspart, 1965. 108 P.
(MIPA 16; 2)
4
HIMMUly, M.P. I FILIPPOV. V.M.. redaktor; BABOCHICIN, S.F., takhalchaskly
redaktor; OW".41tM., takhnichaskiy redaktor
[Safety engineering In low-power Industrial steam; boiler Instal-
lations).jakhnIka besopannosti v ustanovkakh promyehlennykh
parovykh kotloy malol moshobnosti. Moskva, Gos, snerg. isd-vo.
1933s 22) p6 (Riordilml (HLRA 7:10)
(Stoax bollors~-4afety measures)
rp aa btma'it
pots 1A tbel (lr4jgA
IW
deum
'bed Tur ---vOiding tLt H
14 1 a'
VALUMI G.T.0 1kandotekhnonauko doteent; 7ILUPOVo V.H., insh.
Yleasuring the' valueiand the direction of bearing pressure in
reduciAg gears. Vest,mash, 40 n0,3:37-39 Kr 160o
(KIU 13: 6)
(Goering)
S/179/62/oO0/Oo6/oo3/022
E-032./E114
AUTHORSi
-Struminskiy, V.V., and FiliEpov, V.N..- (Moscow)
TITLEs An experimental study of light-scattering phenomena
3.n the laminar and turbulent flow of a liquid
PERIODICAL. Akadeiniya nauk SSSR. Izvestiya. Otdeleniye
telchnicheskikh nauk. Mekhanika i mashinosteoyeniyel
no. 6, 11)b2, 10-16
TEXT: The scattering of light in a stream of water flow-kng
through, a --tube -;Sf 'constant diameter (1. 5 inin) was investigated,
using the apparatus t1lustrated schematically in Fig.2. Them
velocity of the water was weasured with the aid of a specially
developed.ultramicroscope with a rotati.ng-mirror. The mirror is
set up between the objective and the VyCpiece. At a certain
velocity of rotation of the mirror about an axis perpendictilar to
the direction of motion of the liquid- and the optical axis of
the objective, the trajectorie3 of particles suspended in
the liquid will appear as luminous points in the field of view.~
The velocity of a;otion of the image and the velocity of
displacement of' the image due to the rotation of the.mirror are
Card l/ 4
An experimental study of light- S/179/62/ooo/oo6/oO3/022
E032/E114
then equal and opposite. 111 this way velocities between a few
inm/sec arid 1 in/sec can be determined with adequate accuracy.
-The tube (7) in which the flow was investigated was inserted into
a wider tube, as illustrated in Fig.l. Measurements of the
'~relocity prof ile with the aid of a Pitot tube in the larger tuber
(square cross section) in the case of turbulent motion confirmed
existing experimental data. It was found that the transition from
laminar to.turbulent flow was accompanied by a considerable change
in the characteristics of the scattered light. Thus,
turbulent flow gave rise to considerable pulsations in the
amplified output signal of the light detector, which were absent
in the case of rather slow flow. It was found that the.relative
change in the r.m.s. value of the pulsating component of the
~scattered light
fV 100
remained zero up to an axial velocity- uo ;zz;-, 20 cm/sec and
then rose steeply in the transition region between laminar and
turbulent flow,, finally reaching a steady value. The addition of
Card 2/
An experimental study of light- S/179/62/000/006/oO3/022
E032/E114
soluble isalts.to the water was found to have no effect on the
critical velocity.' The magnitude of the pulsating component. -was-~77.
found to.depend on the scattering angle. An experimental-study
iras also made of the frequency distribution of the energy,of the
pulsating, component of the scattered light. It was found that a
change in the axial velocity uo leads to a considerable change
in the sp6ctrum of the pulsating component. At low value's of U0
approaching the critical velocity,moBt 'of the energy is
concentretted, ,Ln the low frequency region. Ifith increasing
velocity,the energy of the turbulent pulsations shift. towards
higher frequencies. finally reaching several hundred c.p.s.,
There are 11 figui-es.
SUBMITTED: July 30, 1962
Card 3/4
An experimental study of light- S/179/b2/odo/oo6/003/022
E032/EI14
7N
VORONVI, F.D., prof.; MCMOV, A.M., prof., doktor tekhn.nauk;
SELIVANOV, N.M., kand.tekhn.naukj SMIRKOV, Yu.D., kaW.tekhn.nauk;
RABINOVICH, Ye.j., kand.tekhn.nauk; CHERNOV, G.I., inzh.;
TKACHENKO, I.A.,,inzh.,- BIXTAGIROV, K.K., inzh.,- FILIPPOV, VX
in7.h,.; KUSTOBAYE:V, O.G., inzh,
MaIdI29 St. 3PS capped steel in Magnitogorsk Metallurgical
Coml*a.Lne open-hearth-furnacese Stall 22 no.8016-718 Ag 162,
(MIRA 15:7)
1. Magnitogoraldy metallurgicheskiy kambinat i Chelyabinskiy
mauchno-issledovatel'skiy institut metallurgii.
(Magnitogorsk-Open-hearth process)
STRUMINSKYj V.1'.,-, FILTPPOVj V.H. (Moscow)
"on song singularities of.turbulent flows"
Report presented at the 2nd All-Union Congress on Theoretical and Applied
Mechaniass Moscow 29 Jan - 5 Feb 64.
IN
Ell
RAWMIjp V*S.,, Ind6; Y=IYM# V.Mo# toMmilk
Blectmic aimo-besim ELO-9 tan oscino3rqbwlth webanIcal
acwu,JUT for vo=wdlng vultchiM Sm"sma, under 2aboratcry
and fio2d ocrAltlow* Trudy VNM; ro*2.ItII2-223 '164.
(IffFA 19t2)
BIGEYETI A. M.; BORODIN, G. L.; POPOV, V. A.; FILTPPOV, V. M.
Hydrogen behavior in the metal of high empacity and extra high
capacity open-hearth furnaces, Izv. vys. ucheb. zav.; cherne met.
7 no.6t44,46 164. (MIRk 17:7)
1. Magnitogorskiy gornometallurgicheskiy institut.
kz
FLASIDCESI V.S., inzh.; FILIPPOV. V.M.., takhnik
Nine-beam electron oscillograph with mechanical scanning Elektro-
-tekhnika 35 no.2:62-63 F '64. ~MIU 17:3)
PPON
F
thermos-namcmat-ar head. Class 42, Io. 172140
letan' iz,o=oteniy i ',Ovarrqk~h .rLnx ),r, mc.
artemoizeter, filament, turbtLlent flo-i, ve"cc."y maasure:ian'
.USTRA( T This Aulhor Certificate presents this head of a thermr-anjimtommeter, The
four filaments fixe4 on gum rts- -o;~ -:7 To
PC
r- ae
- Z,
)CY) MER i -~C
C-rd
m 7, pq m m
4F
_k,
Z
WK
ALC NRt -D6009913 SOURd C06f::' UR/0411.1./66/0001004/0109/0110
AUTHOR: Alekseyev~ Mt Filippovi V. H. 63
ORG:. none
TITLE;. *h device for studying the structure of a stream of liquid or gas. Class 42,
go. 179105
'SOURCE: ~Izobr~teniya, prorayshlennMobraztiy, 'tovarnyye znakL no. 4, 1966, 109-110
TOPIC Tfiojs;~ gas flow* liquid flow, flow, structure flow meter
ABSTRACT: This.Author'sCertificate introduces:~. 1. A device fcv 9-tudying the struc-
ture. of A stream of liguLdAr gase' The unIt conjains a heat se-ni-itive-efe-ment-(e.
a platinum filament) conliected to a-meas*uremen I&Mystem. ~The device is designed for
protectipg the heat sensing element frem mechanical damage and for simultaneously mea-
suring t!)e total pressuNt and recording high-frequency pulsations in flow parameters
at a sinigle point. The heat sensing element is-placed across the inside channel of
the total-pressure tube 2. A modification of this device which Is designed for de-
termining the sign of pulsations in.the.flow parameters. There are holes in the pres-
sure tubit located 2-4 diameters downstream from the heat sensing element designed for
bypass alT the liquidor gas with a velocity of the order of sevei-al centimeters per
second.
532.574.6
UDC:
Card
TM -~77T_
M
_.ACC_ NR,-;: _AP6009913
A
1--heat sensitive element; 2--total-pqres-~
sure tube; 3--holes in tie total-pressure
tube.
A.-.A . .
-;SUB COD-3.: 26/ SUBM'DNM: .66Jan65/ ORIG REN 000/ CYTH REN 000-
Cc
LI VUV,-)'J-U t
ACC NR1 AP6033502 SOURCE CODr,... UR/0413/66/oooTd_iof0l30j 0
INVENTOR: av
Filippo~" 'V~, M.- ikov,
ORO: none
TITLI;: Nozzle of a hot-~wirb anemometer. Class 42, No. 186210
SOURC E: Izobreteniya,i, prom'yshlennyye obraztsy, tovarnyye znaki, no. 18,4966,
130
TOPIC TAGS: nozzle,-- ahemometei, turbulent flow, flow velocity
ABSTRACT: An Author Certificate. has been issued describing a noZzle of a hot-
wire -memometer for measuring lateral components of turbulent flow velocity,
made in the form of an'x-shaped'filament collector fastened to the electroconduct-
ing supports. . To simplify the, design of the nozzle and to improve the measure-
ment precision, the nozzle supports are made of an electroconducting base with a
metal coating 1/.,-thidk and electrically insulated from the base. Each end of
filament is fastened toone support of the electroconducting base (see Fig. 1).
[Trartslation]
LLGrd V2 UDC: 532. 542. 4. 002. 56
M
ACC NRa AP6035743. WURGE CODES UW0-W7WC)W00/O1910
INVENTORS: Alekseyev., M. A.; Filippi*,, V. It.
ORG.- none
TIME: A method for investigating the direction and separation of a liquid or a'
9a
stream. Class 42, No. 1667?8
SOURCE: izobroteniya, pronorshlennyye obraztvy,, tovarnyye znaki., no. 3.90 19660.1o6
TOPIC TAGS: flow research,,~flow.. jet f low, fluid flow, liquid flow, gas flaw, f3A)w.:
characteristic, flow angle,, flow separation
ABV.VW.T.- This Author Certificate presents a method for investigating the direction-,
and separation of a liquid or gas stream from an overflowed surface. The method
involves noting the change in the electrical resistance of two thermoelectrical
sermitiva elemonts included in the circuit of an electrical bridge. To eliminate
external interferences introduced into the stream by the device and to increase the
accuracy of measurements, the sensitive elements consisting ofp for example., thin
metillie films,, are.mounted flush with the overflowed surgice., with one element
plaaed in'the outer thermal layisr of the other,
SO CODEz SUBM DATEt, Mob%
uDct '532.526,315
FILIPPOV, V. N.
Tekhnika poletov. Moskva, Vestnik vozdushnogo flota, 1925. 71 p., illus.
Title tr.: Piloting technique.
TL71O.F5
SO: Aeronautical Scinces and Aviation in the Soviet Union, Library of
Congress, 1955.
--FrLippov,--V;N-~-,-Engiteer*-VI-L-ICHINSM, ";.V., Engineer-
,!; - __ - P_ - 0
stankinprom (-lgh4-)
"From Experience in the Planning of Conve7er Lines for Machining Z-Operationa7.n
Stanki I Instrument Vol. 15, No. 9,, 1944
BR 52059019
lz ,,, ?
7- ;-1 te& I z p,
--:r z--LL--F-,j V I I
:Increasing labor Productivity in Machine Building (Voprosy pcvysheniya
I?roiavoditellnosti truda v mashinostroenii) Gosudarstvennoye nauch-tekh.
:Lzdat. mashinostroitell. literatury, Moscow, 1957. 511 PP.
(Table of Contents authors below)
This collection presents a comparative tech. and economic analysis of
most effective methods and industrial processes for obtaining high labor productivity
In machine building, Output may be stepped up by further standarizationp of machine
-tools, materials, and pr6duction methods; draving on unused potentials.
Covers all stages of planning and priduotion as performed in modern plants of
'USER, actual experience,.and nev methods are discussed.
FILIPPOVI V. N., KHCRVZHMO, M. V., "Producti on-line Methods in Machine-
Tjc~i~nuiacture'ff p. 440.
6 (7) SOV/111-59-10-6/2-3
AUTHOR* Filippovt V.N.9 Engineerg Chief Designer
TITLE: The VIS-80 Input-Testing Rack
PERIODICAL: Vestnik evyazi, 1959, Nr 10, pp 10-11 (USSR)
ABSTRACT: This article describes the new VIS-80 input -testing rack,
developed at the Teentrallnoye konstruktorskoye byuro
minister8tva svyazi SSSR (Central Desi n Office of' the
Ministry of Communications of the USSR5, presently in pro-
duction. This unit is intended for use as an input- appa-
ratus in the distribution section (kross) of the tele-
graph office. It serves for connection, switchin and te-
sting of 80 single-conductor telegraph circuits ~channels)
and protection of station equipment from high.currents
and voltages. The rack equipment is intended for connec-
tion of 20 aerial circuits and 60 cable circuits. Connec-
tion of both aerial and cable circuits to the rack is
briefly described with the aid of dia
ams (Figs 1,2);
SN-0.15 fuses and RA-350 dischargers gaps) are employed
g
in the aerial circuit input section; the cable circuit
Card 1/2 input section is similar save for the absence of the