(Sanitized) PROGRESS REPORT - DECEMBER 1965 PROJECTS 552 AND 552A
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78B04747A002900040065-6
Release Decision:
RIPPUB
Original Classification:
K
Document Page Count:
8
Document Creation Date:
December 28, 2016
Document Release Date:
November 25, 2002
Sequence Number:
65
Case Number:
Publication Date:
January 18, 1966
Content Type:
LETTER
File:
Attachment | Size |
---|---|
![]() | 171.61 KB |
Body:
STAT
STAT
Approved For'GWIease 2003/01/28 CIA-RDP78B0474 ,Q~?2 040OAk-
Progress Report - December 1965
Projects 552 and 552A
Gentlemen,
Progress
Report on Projects 552 and 552A for the period December 1965.
Enclosed are three (3) copies of
Very truly yours,
STAT
STAT
STAT
LHB/de
Enc: (3) P.R.
Cert. #743934
18 8 January 1966
Declass Review by
NIMA/DOD
?PI' kppP dR1 or ? mkwee sBQQ~r/01r~~e$,pc d~F "Z~~~ a~h~~? nQi~ g~, i 6
STAT
Approved For Mlease 200310 1128 m CIA-ROF-781304747A00290004006
PROGRESS REPORT
For
VERSATILE, HIGH PRECISION STEREO
POINT TRANSFER DEVICE
Period Covered: December 1965
Dated: 17 January 1966
Job No.: #552, #552A
Document No.: OD-276
Approved For Release 2003/01/28 : CIA-RDP78B04747A002900040065-6
Progress Report 552 & 552A for December 1965
This month's work has been centered in studying, re-
designing, and reworking the laser optics and fabrication com-
ponents for Encoder and installation in the Point Transfer Device.
Stereo Viewer #552A, Serial No. 102, was delivered and installed
early in December.
OBJECTIVE ASSEMBLIES
The problems of image color and marking size is the
effort here. To improve image color the present dichroic beam
splitter is being reworked with neutral coating of near 50%-50%
reflection and transmission properties. Although this approach
will reduce visual and laser image brightness by 30%, color bal-
ance of visual image will be most effectively preserved. To
compensate for laser optical path losses mark image size will be
reduced 30%. The motions to change laser wavelength had several
unknowns in image color and marking effects bringing further
delays to equipment delivery. Some delay is expected because of
problems in reworking beamsplitter and optics.
A companion motion here is to correct the optical set-
up determining the mark size and image quality at the film plane.
The near 1:1 magnification lens formerly used had physical inter-
ference that made sharp focusing the laser reticle impossible
when visual optics were focused on the film. When image was
STAT
Approved For Release 2003/01/28 : CIA-RDP78B04747A002900040065-6
-1-
STAT
focused by the lens in its other conjugate position image size
increased significantly to about 5/32 diameter, making laser
marking very unreliable with current laser output. By lengthening
the relay lens focal length proper mark size is obtained, but
reticle position had to be shifted by approximately 3 inches.
A part of the relay lens focal length change is the re-
design of the prismatic lens and the optics at the laser. Since
the ray geometry has been substantially altered new lenses are
required. To minimize delay of the system debugging, plastic
lenses will be temporarily used while their glass counterparts
are being made.
The main plate will be modified and optics reassembled
during the next reporting period. Sample of film marks will be
forwarded during that period for inspection.
ENCODER - COUNTER SUBSYSTEM
All preliminary work of design, material ordering has
been completed. Fabrication of switch/connector coupler and the
small sloped front cabinet with associated mounting hardware should
be completed early in next reporting period. Delivery of STAT
cabinets is seriously delayed with delivery in late February or
March. To overcome this upset, present cabinet will be substituted
and delivered with system, if necessary.
Wiring is being delayed because of noise tests
JIHI Chas recommended we make to prevent counting errors. Al-
though recommended shielded wire is being used, we want to be
certain the long lengths required will not require mounting the
15EL44 models next to the encoders.. 7~. ? F
1) -A-11N
WORK FOR NEXT REPORTING PERIOD
1) Continue debugging 552, Serial 101.
Approved For Release 2003/01/28 : CIA-RDP78B04747A002900040065-6
STAT
STAT
Enclosures
1) CD-143 and CD-144
2) Financial Statement
Approved For Release 2003/01/28 : CIA-RDP78BO4747AO02900040065-6
-3-
STAT
6 December 1965
552 - CD-144
WWB: r f
DATE: 3 December 1965
ATTENDEES: ED, WM, RB
Purpose of this visit was to recheck system with corrections
and to introduce RB to system. Except for image rotation, left
channel jammed, and was later satisfactorily repaired.
Approved For Release 2003/01/28 : CIA-RDP78BO4747AO02900040065-6
STAT
6 December 1965
552 - CD-143
WWB:rf
The following were customer comments during the plant
acceptance.
1) Left - Y counter drops counts at lower speed ranges
(check rotopulse action, magnetism of cover).
2) Loop forming rollers jam upon return up vertical
flight (slip 1 tooth of coupling gears. May require resetting
switch).
3) Vacuum holddown OK but has leak outer left.
Stated new manifolds and platens are to be installed on machine
at delivery.
4) Spool brakes appear to lag.
5) Eyelenses do not accommodate a very near sighted
person (a step on eyelens barrel prevents this adjustment).
6) Obstacle appears in right upper field - 11 o'clock
Obstacle appears in left upper field - 1 o'clock
7) Correct penta mirror alignment, dot superimposed,
and lens centering.
`) Correct runout (2) rollers left side.
9) Customer sees no problem that would prevent delivery
7 December 1965.
All of the above were corrected the evening of 2 December
1965.
Approved For Release 2003/01/28 : CIA-RDP78B04747A002900040065-6
STAT Approved For Release 2003/01/28 : CIA-RDP78BO4747AO02900040065-6
Approved For Release 2003/01/28 : CIA-RDP78BO4747AO02900040065-6