DEAR JOHN:

Document Type: 
Document Number (FOIA) /ESDN (CREST): 
CIA-RDP78B04747A000600020013-0
Release Decision: 
RIPPUB
Original Classification: 
K
Document Page Count: 
2
Document Creation Date: 
December 28, 2016
Document Release Date: 
December 21, 2001
Sequence Number: 
13
Case Number: 
Publication Date: 
March 24, 1961
Content Type: 
LETTER
File: 
AttachmentSize
PDF icon CIA-RDP78B04747A000600020013-0.pdf86.87 KB
Body: 
/1 _ ~~~INTL ~C Approved For Release 2002/06/17 : CIA-RDP78BO4747A000600020013-0 Y_ STATINTL P. O. Box 1407 Main Post Office Washington 13, D. C. STATINTL Attention: STATINTL Dear John: of the 2:1 Reduction Lens. This was written by I am enclosing the latest report on the development one of our Optical Engineers, who is currently working on the lens development? Since the time this report was completed, the design has been corrected to the point where we feel that only a minor touch-up will be required. In fact, it may be good enough right now to put into production. We are making a thorough analysis which will let us know whether further work is required. In the meantime, we are sending the glass requirements to the various optical companies all over the world in order to get price infor- mation on their willingness to bid the job. As you can see from the design report, we started out with a considerably simpler design concept than the one which we Declass Review by NIMA/DOD Approved For Release 2002/06/17 : CIA-RDP78BO4747A000600020013-0 STATINTL Approved For Release 2002/06/17 : CIA-RDP78B04747A000600020013-0 STATINTL STATINTL STATINTL March 24, 1961 Washington 13, D. C. Page 2 finally used. The present system contains 14 pieces of glass with a total blank weight of approximately 1, 300 pounds, Obviously, we cannot purchase this glass for the estimated cost in the original breakdown which was We are hopeful that the glass costs will not exceed the entire contract price. STATINTL You and I have indicated that you do not wish us to lose money and although we cannot submit a revised cost to you at this time, I thought I would give you a little advance notice that our costs will be considerably higher than those in the estimate. As soon as we have final glass quotation, we will let you know how we stand on the entire contract.. the one variable which we cannot control except through speci- fications to our vendors. Perhaps, you have some contact with the glass companies which could help us to impress upon them the need for the utmost in quality on these large pieces of glass. resolution requirements. The only problem from here on is one of manufacturing the system to the design performance. In achieving design performance, glass homogeneity will be The lens design at this point looks extremely good and we are perfectly confident of its capabilities of meeting the We are looking forward to your visit and expect to have a com- plete story on where we stand by that time. Very truly yours, Encls. Chief Engineer GKT:cs STATINTL STATINTL Approved For Release 2002/06/17 : CIA-RDP78B04747A000600020013-0