4 X 5 ' FILM CHIP PROCESSOR
Document Type:
Collection:
Document Number (FOIA) /ESDN (CREST):
CIA-RDP78B04747A000300010010-7
Release Decision:
RIPPUB
Original Classification:
K
Document Page Count:
2
Document Creation Date:
December 28, 2016
Document Release Date:
October 5, 2001
Sequence Number:
10
Case Number:
Publication Date:
March 30, 1966
Content Type:
LETTER
File:
Attachment | Size |
---|---|
CIA-RDP78B04747A000300010010-7.pdf | 47.33 KB |
Body:
25X1A
March 30, 1966.
25X1A
llear Tom: Sub~1ect: 4 x 5''~ Film Chip Processor
This letter is to confirm that the Ghip Processor
has been completed and is standing in storage pending your
shipping instructions.
The following adjustments to the machine were made ,
as agreed upon:
(1)
Aide release consisting of a spring
loaded plunger or similar device.
(2) A toggle switch on the inspection light.
(See below}.
(3 )
A flow back method between tanks to pre-
vent carry-over.
(l{.) An anti-splash deuicc~ on the wash tank.
(5 ) Impro ve or comp lete air knif e.
(6) Complete light baffling.
(7) Improve the developer tanlt to accept
9 frames per minute and higher.
w
(~) Furnish operational maintenance man uals,
including schematics and parts list.
(See below).
(9) Furnish total of 140 slides. (See below).
(10) Take u p magazine indicator.
Declass Review by NIMA/DOD
Approved For Release 2001/11%07: CIA-RDP78B04747A000300010010-7
Approved For Release 2001/11/07 :CIA-RDP78B04747A000300010010-7
- 2 -
With regard to Item /'~2, a 'Tpush on -push off'
switch has been provided.
In Item ~~$ the operating manual and recommended
spares list has been drafted and we expect this to be completed
by April 11th.
Item ~',~9 - we have changed the design of the chip
holders to stainless steel and 110 of these are now out for
:manufacture. As soon as we receive the first one we shall be
forwarding it to you b the fastest possible route. This is
in accordance with request.
I trust this meets with your approval.
/mk
25X1A
Approved For Release 2001/11107 :CIA-RDP78B04747A000300010010-7