CABLE TO RUCSC/SAC OFFUTT AFB OMAHA NEB FROM NPIC WASHDC

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A001200010036-9
• Release Decision: RIFPUB
• Original Classification: S
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: April 29, 2008
• Sequence Number: 36
• Publication Date: January 17, 1966
• Content Type: CABLE

Approved For Release 2008/04/29: CIA-RDP78BO4558AO01200010036-9
0
P 172 133Z
FM NPIC WASHDC
TO RUCSC/SAC OFFUTT AFB OMAHA NEB
RUCVAA/4080 STRRT WG OL 19 BARKSDALE AFB LA
RUCVAA/2D RTS BARKSDALE AFB LA
RUEKDA/DIA WASHDC
RUECYH/NAVRECONTECHSUPPCEN SUITLAND MD
RUEPIA/CIA WASHDC
RUWBKN/15TH AF MARCH AFB RIVERSIDE CALIF'
RUWGAA/2 AF BARKSDALE AFB LA
BT
S E C R E T CITE NPIC 6281
15TH AF (FOR DI), SAC (FOR DIM/GOLDEN TREE/DOCR, DM 4) 2D AF (FOR
CAMERA B 23 WAS USED IN MISSION 8067 FLOWN ON 14 JANUARY
PROCESSING WAS ACCOMPLISHED BY BARKSDALE.
ORIGINAL NEGATIVE:
A. THE EXPOSURE WAS ADEQUATE AND THE RESOLUTION IS GOOD.
1
18 JAN 1966
B. 9R SIDE: EDGE STATIC TRACES ARE PRESENT ALONG BOTH EDGES
OF THE FILM THROUGHOUT THE MISSION. SEVERAL ROWS OF MINUS DENSITY,
DOTS ARE PRESENT ON THE FIRST THIRD OF THE MISSION. THE DOTS`
ARE SPACED APPROXIMATELY 1.65" APART. OUTBOARD ROLLER CHATTER IS
PRESENT INTERMITTENTLY THROUGHOUT THE MISSION AND IS EXTREMELY
MINOR. A MANUFACTURER'S SPLICE IS LOCATED IN FRAME 568.
car;
r- -I c,
BOTH EDGES OF THE FILM. EDGE STATIC IS MORE PRONOUNCED ON THE
OUTBOARD EDGE OF THE FILM AT THE START OF THE MISSION. AS THE
MISSION PROGRESSES THE STATIC DIMINISHES TO ONLY A MINOR NATURE
AND IS INTERMITTENTLY PRESENT ON BOTH EDGES OF THE FILM. THERE
1966 JAN 17 22 02Z
Declassification Review by
NGA/DoD
Approved For Release 2008/04/29: CIA-RDP78BO4558AO01200010036-9 1f
 Approved For Release 2008/04/29: CIA-RDP78BO4558AO01200010036-9
4 ,Z- _ 0
ARE NUMEROUS ROWS OF MINUS DENSITY')OTS PRESENT IN THIS MISSION.
THE DOTS ARE MORE DISTINGUISHABLE IN HE BEGINNING OF THE MISSION.
MOST OF THE DOTS ARE 1.7" APART BUT ON ONE OCCASION THEY MEASURED
TO BE 2.3" APART. AS THE MISSION PROGRESSES THEY SLOWLY DIMINISH
UNTIL ONLY ONE ROW IS DETECTABLE NEAR Tom: END OF THE MISSION.
THIS LAST ROW IS 2.25" FROM THE INBOARD EDGE AND 2.3" APART. A
MANUFACTURING SPLICE IS LOCATED IN FRAME 1125. ASSOCIATED FOG
CAN BE FOUND ON FRAMES 1127 AND 1129.
D. BOTH SIDES: THE FIRST TITLED FRAME IS 0000 AND THE
LAST TITLED FRAME IS 2853,. OCCASIONAL SMEARED FRAMES CAUSED BY
VIBRATION INDUCED BY VEHICLE MANEUVERS WERE NOTED.
E. THERE WERE NO MAJOR PROCESSING ANOMALIES OR CAMERA MAL-
FUNCTIONS IN THIS MISSION.
3. POSITIVE:
A. PI SUITABILITY IS GOOD.
B. PRINTING AND PROCESSING WERE GOOD.
C. CLOUDS DEGRADE OR OBSCURE APPROXIMATELY 25 PERCENT OF
THIS MISSION. GP-1.
S E C R E T
-END OF MESSAGE-
1
Approved For Release 2008/04/29: CIA-RDP78BO4558AO01200010036-9