CABLE TO RUCSC/SAC OFFUTT AFB OMAHA NEB FROM NPIC WASHDC

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A001000040085-4
• Release Decision: RIFPUB
• Original Classification: S
• Document Page Count: 3
• Document Creation Date: December 28, 2016
• Document Release Date: February 27, 2007
• Sequence Number: 85
• Publication Date: November 26, 1965
• Content Type: CABLE

Approved For Release 2007/03/01: CIA-RDP78BO4558AO01000040085-4
P 2623202 7"
FM NPIC WASHD&LIL
OUT57258
1965 NOV 26 23 4 5 Z
TO RUCSC/SAC OFFUTT AFB OMAHA NEB 2 9 -NOV 1911
I
RUCVAA/2D RTS BARKSDALE AFB LA jCyt\o. Office j Action
RUEKDA/DIA WASHDC ffT
RUECYH/NAVRECONTECHSUPPCEN SUITLAND MD I f cs
RUEPIA/CIA WASHDC Am-mri~-~-
RUWBKN/15TH AF MARCH AFB RIVERSIDE CALIF SEC BR T
RUWGAA/2 AF BARKSDALE AFB LA rP&DS
BT can
15TH AF (FOR DI), SAC (FOR DIM/GOLDEN TREE/DOCR, DM 4) 2D AF & OR
I PSD?wn 1. CAMERA B 7 WAS USED IN MISSION $058 FLOWN ON 24 NOVEMBEI TID
IAD I
1965 _ PROCESSING WAS ACCOMPLISHED BY NAV RECON TECH SUPPCEN. y
2. ORIGINAL NEGATIVE:
A. EXPOSURE WAS ADEQUATE AND THE RESOLUTION IS GOOD.
9R SIDE: SLIGHT EDGE FOG WAS NOTED ON THE INBOARD EDGE
B
.
OF APPROXIMATELY THE FIRST 20 FRAMES. MINOR ROLLER CHATTER IS
PRESENT ALONG BOTH EDGES BUT IS MORE PRONOUNCED ON THE INBOARD
EDGE. TWO ROWS OF MINUS DENSITY DOTS ARE PRESENT APPROXIMATELY
2.1" FROM THE OUTBOARD EDGE. THEY ARE 2.3" AND 1.6" APART AND ARE
NOTED THROUGHOUT THE MISSION. ANOTHER ROW OF MINUS DENSITY DOTS
0.5" FROM THE INBOARD EDGE AND 1.6" APART WERE NOTED IN THE FIRST
2/3 OF THE MISSION. MANY INCONSISTENT PLUS DENSITY LINES PARAL-
LEL TO THE MAJOR AXIS WERE NOTED FROM FRAME 21 TO THE END. THE
MOST PRONOUNCED PLUS DENSITY LINE IS LOCATED 2.1" FROM THE OUT-
BOARD EDGE. A HEAT SPLICE IS LOCATED BETWEEN FRAMES 259/260.
0
Advance COP
6awtind
1
7 OssF viw by
 Approved For Release 2007/03/01: CIA-RDP78BO4558AO01000040085-4
A BREAKDOWN SPLICE WAS MADE ACROSS THE FORMAT OF FRAME 662.
AS A RESULT OF THIS SPLICE CHEMICAL CONTAMINATION WAS NOTED IN
FRAME 663/664. IRREGULAR PLUS DENSITY STREAKS WERE LOCATED IN
DIFFERENT AREAS OF FRAMES 1002/1003 AND 1006/1007.
C. 9L SIDE: ROLLER CHATTER IS PRESENT ON THE INBOARD EDGE
THROUGHOUT THE MISSION. NUMEROUS INCONSISTENT PLUS DENSITY STREAKS,
PARALLEL TO THE MAJOR AXIS, ARE PRESENT THROUGHOUT. IN THE EARLY
PORTION OF THE MISSION THE MOST PRONOUNCED PLUS DENSITY STREAKS
ARE LOCATED 2.1" AND 2.7" FROM THE INBOARD EDGE. DURING THE
LATTER PORTION THE MOST PRONOUNCED PLUS DENSITY STREAKS ARE LO-
CATED 1.7", 4.1" AND 4.7" FROM THE INBOARD EDGE. SEVERAL EMULSION
DEFECTS ARE PRESENT THROUGHOUT THE MISSION. EXAMPLES MAY BE
SEEN ON FRAMES 528, 572 AND 657. A MANUFACTURERS SPLICE WITH
ASSOCIATED FOG AND A BIASED MINUS DENSITY STREAK IS PRESENT ON
FRAME 153. A HEAT SPLICE IS LOCATED BETWEEN FRAMES 488/489.
A BREAKDOWN SPLICE WAS MADE INSIDE THE FORMAT OF FRAME 660.
CHEMICAL CONTAMINATION CAUSED NUMEROUS PLUS DENSITY DOTS AND
MINUS DENSITY STREAKS IN FRAMES 660/661.
D. BOTH SIDES: EDGE STATIC IS PRESENT ON BOTH EDGES
THROUGHOUT THE MISSION. THE VERTICAL DOT INDICATOR IS BLOOMED.
METERING IS IRREGULAR RANGING FROM 0.4" TO 0.7". THE LAST
TITLED FRAME IS 1368.
E. THERE WERE NO MAJOR CAMERA AND PROCESSING MALFUNCTIONS.
3. POSITIVE:
1
 pprove or Release 0207/011 CIA-RDP78BO4558AO01000040085-4
A. PI SUITABILITY IS GOOD.
B. PRINTIOd AND PROCESSING WERE GOOD.
C. CLOUDS DEGRADE OR OBSCURE APPROXIMATELY 40 PERCENT
OF THE MISSION.
GP- 1
S E C R E T
-END OF MESSAGE-
1