CAMERA NO. B-7 WAS USED IN MISSION 8083 FLOWN ON 5 APRIL 1966

• Document Type: CREST
• Collection: NGA Records (Formerly NIMA)
• Document Number (FOIA) /ESDN (CREST): CIA-RDP78B04558A000600190064-6
• Release Decision: RIPPUB
• Original Classification: S
• Document Page Count: 2
• Document Creation Date: December 28, 2016
• Document Release Date: April 8, 2008
• Sequence Number: 64
• Publication Date: April 8, 1966
• Content Type: CABLE

Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190064-6
OUT58178
EXTENDS PARTIALLY INTO THE FORMAT ON FRAMES 3079 16459 1832 AND ;c~a~ -i
BETWEEN FRAMES 1424/1425. A MANUFACTURER'S SPLICE IS MADE IN
FRAME 1173 WITH ASSOCIATED STATIC TRACES AND MINUS DENSITY SPOTS
PRESENT ON FRAMES 1170 AND 1173. TITLE INK SMUDGES AND CLEANING
SOLVENT ARE SMEARED PARTIALLY INTO THE FORMAT AREA ON AT LEAST
FOG? CAUSED BY LIGHT STRIKING ACROSS THE OUTBOARD EDGE OF THE FIEF;
IC4
TO THE OUTBOARD EDGE OF THE FILM ON FRAMES 1553 THROUGH 2450 (EN, )w- ! Try
MISSION. ANOTHER PLUS DENSITY STREAK OCCURS 2.6
" FROM AND PARALLEL 1 F'-)
THE OUTBOARD EDGE ON FRAMES 1306 THROUGH THE END OF THE
FRAMES AND TERMINATE AT A HEAT SPLICE. ONE IS 2.2" FROM THE OUT-
BOARD EDGE AND THE OTHER IS 1.18" FROM THE INBOARD EDGE OF THE FILM/~,r
A FAINT PLUS DENSITY STREAK IS OBSERVED 0.8" FROM AND PARALLEL TO 1
,,63 1- 8 00 01Z
Ify
1. CAMERA NO. 5-7 WAS USED IN MISSION $083 FLOWN ON 5 APRIL
1966. PROCESSING WAS ACCOMPLISHED BY NAV RECON TECH SUPPCEN.
2. ORIGINAL NEGATIVE:
A. EXPOSURE WAS ADEQUATE. RESULTION IS GOOD WHERE NOT
DEGRADED BY WEATHER CONDITIONS.
B. 9R SIDE: PRESSURE ROLLER STATIC (CHATTER) IS PRESENT
ALONG BOTH FILM EDGES THROUGHOUT THE MISSION. THE VERTICAL INDICATOR
DOT IS BLOOMED ON EACH VERTICAL FRAME. EDGE FOG OCCURS INTERMITTENTLY
ALONG THE OUTBOARD EDGE OF THE FILM THROUGHOUT. TWO PLUS DENSITY
8 APR 1966
STREAKS PARALLEL TO THE FILM EDGES, ARE PRESENT ON THE FIRST 1260
S E C R E T 072345Z
PRIORITY 6$72
SECRET
Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190064-6
 Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190064-6
0 9
NINE FRAMES OF THIS MISSION.
C. 9L SIDE: TWO SEPARATE ROWS OF MINUS DENSITY DOTS ARE
PRESENT ON FRAMES 3 THROUGH 41. THE ROWS ARE LOCATED 1.6 AND 4
INCHES FROM THE OUTBOARD EDGE. THE INDIVIDUAL DOTS ARE SPACED
1.55 INCHES APART. MINOR EDGE FOG AND EDGE STATIC IS PRESENT ON
THE INBOARD EDGE THROUGHOUT THE MISSION. SEVERAL INCONSISTENT
LONGITUDINAL PLUS DENSITY STREAKS ARE PRESENT INTERMITTENTLY
THROUGHOUT. THE IL AND 2L POSITION INDICATOR RECORDS ARE FAINT
BUT READABLE. A MANUFACTURER'S SPLICE WITH ASSOCIATED FOG IS
LOCATED IN THE FORMAT OF FRAME 837. HEAT SPLICES ARE PRESENT
BETWEEN FRAMES 628/629, 1235/1236, 1274/12759, AND 1930/1931.
D. THE FRAMES ARE TITLED CONSECUTIVELY 0001 THROUGH 2480.
THE CLOCK COUNTER SKIPPED FROM FRAME 2479 THROUGH 2490. CROSS TRACK
SMEAR DUE TO VEHICLE MANEUVERS WAS NOTED ON SEVERAL FRAMES THROUGH-
OUT THE MISSION.
3.
E.
THERE WERE NO MAJOR CAMERA OR PROCESSING MALFUNCTIONS.
POSITIVE:
A.
B.
C.
PI SUITABILITY IS GOOD WHERE NOT DEGRADED BY CLOUDS.
PRINTING AND PROCESSING WERE GOOD.
CLOUDS AND HAZE DEGRADE AND OBSCURE APPROXIMATELY 35
PERCENT OF THE MISSION.
S E C R E T
--END OF MESSAGE--
1
Approved For Release 2008/04/08: CIA-RDP78BO4558A000600190064-6